293335998d38c497293b1c41f7ad8342b507d458 |
|
09-Jan-2017 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 05e5e615e6a26d7a9f5bd0569a0baeae1bcdee49 05e5e615e AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad 0c4b9025c AP: Do not look for supported rates in DMG/IEEE 802.11ad e72faadb4 bgscan_simple: Fix short_scan_count comparison 517b5f928 nl80211: Zero num_modes if nl80211_get_hw_feature_data() fails 39c5da328 nl80211: Use correct attribute for scan flags in vendor scan c167662d7 eap_proxy: On SIM error flush PMKSAs only for SIM/AKA/AKA' networks 6657bb158 Fix OOM handling in neighbor report response handling 7187e2093 Allow LCI request with no subelements d73420143 RRM: Enable beacon report with active/passive scan for all drivers ec45927b8 Report received beacon report with BEACON-RESP-RX event f3383366a Report beacon request TX status as control interface event 90d9d7c32 Beacon request through hostapd control interface 73a27a634 Add hostapd configuration parameter rrm_beacon_report de6ec8b55 Enable Beacon Report using beacon table for all drivers 6774c6a9f Update copyright notices for the new year 2017 f56877414 Do not add own BSS in neighbor report with invalid op_class/channel aeff0645d FILS: Fix FILS Realm Information ANQP-element construction 76196ddb2 wpa_supplicant: Add support for Beacon Report Radio Measurement b3060bf99 common: Add helper function to convert RSSI to RCPI 1ac4dba31 wpa_supplicant: Extend verify_channel() and make it global c9ff8e5f6 common: Add function to get an operating class by its number and country e4f1d879c common: Add non-global to global operating classes conversion 96a5f14ee nl80211: Add support for additional scan parameters for beacon report c16b9f8d3 driver: Add scan support to beacon report 3c716fdbd wpa_supplicant: Refactor wpas_rrm_build_lci_report() e1b96e112 wpa_supplicant: Send rejection for unsupported radio measurements 0c73e410d wpa_supplicant: Limit RRM response size to MMPDU size 9664ab8b7 wpa_supplicant: Refactor Radio Measurement Request handling 332bf5d3f wpa_supplicant: Validate RRM request frame format ec493469f wpa_supplicant: Move RRM implementation to a dedicated file d1c74f8c9 Add RRM definitions for beacon report measurement 6a31440b8 Fix LCI request subelement processing ce691a8d9 Add CONFIG_MESH into wpa_supplicant defconfig 67129ab9e wpa_cli: Add commands to use PMKSA_GET/ADD bbad185c1 P2P: Fix compilation warning in p2p_add_device() 2977f5193 GAS: Remove unnecessarily duplicate gas_frag_limit configuration 1940559ea FT: Drop FT Action frames if ft_over_ds=0 d8de90487 Remove deprecated tx_queue_* params from hostapd.conf notes 78022c836 Fix memory leak on hostapd eap_user_file parsing error paths 02f999c6d hostapd: Remove unnecessary NULL check from parser functions fd5f29e7e Fix memory leak in hostapd BSS_TM_REQ error path handling 95de34a10 Remove trailing whitespace 45997cce4 hostapd: Add TERMINATE as per-interface command 546680f81 hostapd: Do not update dtim_period with invalid value 356773058 RADIUS server: Increase maximum number of sessions a5861afcb hostapd: Do not update invalid wep_key_len_unicast f78402ace hostapd: Do not update rejected wep_key_len_broadcast e0ba7efe5 hostapd: Do not update eapol_version with rejected value 9266d00bf hostapd: Reject invalid macaddr_acl value 8628555f9 hostapd: Check driver parameter before replacing previous value 1dfd25a68 Fix hostapd SIGHUP processing before interface is enabled 34e29dfd4 Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call 65dfa8728 mka: Make MKA actor priority configurable 9bcfd5be8 Document new D-Bus WPS properties 77fcbf7ff D-Bus: Use a helper function to get possibly NULL strings dbf524946 D-Bus: Add DeviceType in WPS property 266097fda D-Bus: Add device serial number in WPS property 3ee6a3ab3 D-Bus: Add model number in WPS property ae66822cd D-Bus: Add WPS model name as property 318d4b5be D-Bus: Add WPS manufacturer as property b20f031c6 D-Bus: Add WPS device name as property 4a45dc192 mesh: Show [MESH] flag in print_bss_info() c04a67deb hostapd_cli: Add completion for get command bf4167b9d hostapd_cli: Add completion for set command 86adff09e hostapd_cli: Completion for further commands with STA parameter 4f59ad069 hostapd_cli: Use common completion for commands that use stations 62b95eb67 hostapd_cli: Add missing command help descriptions 04f02faac Fix wpa_cipher_to_alg() return type 9187b13ad wpa_supplicant: Add BSS CURRENT control interface command d7f12e4eb OpenSSL: Make sure local certificate auto chaining is enabled 4be02b71b OpenSSL: Remove SSL_{CTX_,}_clear_options ifdefs 7655bd738 P2P: Do not use wait_time for SD Response TX without fragmentation 1f0fdaf0e Fix race condition between AssocResp callback and 4addr event a6f3761f7 eap_proxy: Add support for SIM state change indication from eap_proxy 79a54ab9f eap_proxy: Fix eap_proxy_init() prototype to use const eapol_cb 4e118c847 D-Bus: Add 'freq' option to P2P Find method to specify starting channel e414f4f02 PeerKey: Fix STK 4-way handshake regression 28fb9bb19 PeerKey: Fix EAPOL-Key processing dfc773172 Android: Add p2p_add_cli_chan=1 option 7508c2ad9 PAE: Make KaY specific details available via control interface b54f43390 FILS: Make FILS Indication element information available in BSS output 8183aee6c FILS: Add support for building FILS Realm Information ANQP-element 9cad61867 FILS: Add Realm Information ANQP-element in BSS data 26bf70e3d FILS: Separate FILS realm configuration from ERP domain 42b847ac1 FILS: Fix hashed realm name derivation 29062f293 Update various definitions based on IEEE Std 802.11-2016 aaa9c60bc Fix preauth_test build by updating add_pmkid/remove_pmkid callbacks 0babae87a Fix wpa_supplicant build error with IEEE8021X_EAPOL unset 19810d29b Make Beacon IEs available in wpa_supplicant BSS command 274e76f22 mesh: Fix channel configuration in pri/sec switch case cebda0e3e Make debug print clearer for AP/mesh mode secondary channel issues 3459381dd External persistent storage for PMKSA cache entries c57931273 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant 655dc4a43 Send "TERMINATING" event from hostapd 5149a0f04 P2P: Set p2p_persistent_group=1 at the time of reading disabled=2 065c029a5 Remove MBO dependency from Supported Operating Classes element 62cd9d792 nl80211: Specify the BSSID in the QCA vendor scan 444930e5b Define an attribute to do a specific BSSID QCA vendor scan cea761472 Add QCA vendor command definitions for IDs 61-73 cb0cc6efa Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands c313c8a5d Fix QCA vendor command values for SAR power limits a5c723adc Interworking: Clear SCANNING state if no network selected a1836de64 SME: Fix IBSS setup after shared key/FT/FILS association f49c852b5 P2P: Fix a theoretical out of bounds read in wpas_p2p_select_go_freq() 944d48588 P2P: Fix a theoretical out of bounds read in wpas_p2p_setup_freqs() 0a6c9dc70 P2P: Send P2P-DEVICE-FOUND event on peer changing device name 9a431d493 WFD: Clear wfd_subelems when P2P peer stops sending them 6e374bd44 Ignore scan results from ongoing scan when FLUSH command is issued 71ac93453 Make update_idx available in BSS control interface command 49aa88bb5 P2P: Clear PEER_WAITING_RESPONSE on GO Negotiation success c79238b6a Define a QCA vendor command to configure SAR Power limits 0f5eb69f8 Use eloop timeout for post-EAP-Failure wait before disconnection 20b1a9e23 Allow hostapd wep_key# parameters to be cleared 5ec3d510e wpa_passphrase: Reject invalid passphrase Test: Wifi Suite Change-Id: Ida52ca4e43bbc326a89d4c9848529df2d545b692 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/l2_packet/l2_packet_privsep.c
|
aff761db795db8b506c6f6af7ff607856cf85a81 |
|
06-Feb-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 2c0efd9e49b15da163cee659409eee85390620c3 2c0efd9 P2P: Fix stopping on search after SD callback db3168d OpenSSL: Use SSL_cache_hit() when available 68ae477 OpenSSL: Use library wrapper functions to access cert store abe96d0 P2P: Clean up Listen channel optimization debug prints d2ca6ba Fix hostapd obss_interval documentation d027c7b Fix 20/40 MHz co-ex report processing with obss_interval=0 93eca61 P2PS: Do not remove pending interface on p2p_stop_find ae2dd83 P2PS: Allow PD retry in SEARCH and LISTEN_ONLY also 87d5ef5 P2PS: Add commands to control interface redir list 0cf12b3 P2PS: Send P2P_FIND_STOPPED event during P2P SD also 306aaf4 P2PS: Start WPS registrar upon GO formation 9e96e46 P2PS: PD Response processing ab8ee77 P2PS: Provision Discovery fail event 1300cc8 P2PS: PD Request processing and PD Response building 5fefce2 P2PS: Callback to send P2PS provisioning events 9a58e52 P2PS: Callback to create pending group after sending PD Response 895d94d P2PS: Callback to remove stale persistent groups f309c18 P2PS: ASP provisioning commands to control interface 6d90851 P2PS: Process P2PS provisioning commands 369678a P2PS: Add P2PS attributes into PD Request if requested 59fec34 P2PS: Allow p2p_build_ssid() to use pre-set SSID d4b43b5 P2PS: Add support to send ASP-RESP events 6df08d0 P2PS: Logic to parse GAS requests for ASP services 5a4102c P2PS: Add support to send ASP service requests 095b3c4 P2PS: Add Application Service Info to device found events 4660e73 P2PS: Add Advertised Service Info into Probe Response frames 9e7321e P2PS: Parse Probe Request frames for matching ASP hashes ae9d45f P2PS: Extend add/del services logic to support ASP ea8e033 P2P: Allow p2p_get_group_num_members() to be called with NULL 4f88fc0 P2PS: WPS changes needed for P2PS default PIN 1a94b0a P2PS: Add service hash to Probe Request frames 5177509 P2PS: Add option to specify seek strings into P2P_FIND 5f18501 P2PS: Helper functions to build new P2P attributes 60d1148 P2PS: Add parsing of new P2P attributes b9348be P2PS: Add new P2P identifier assignments from P2P spec v1.5 c3d6c71 Add helper functions for escaping and unescaping UTF-8 66eaf8a Fix driver-offloaded offchannel TX done processing c5e154c P2P: Add P2P state into p2p_send_action_cb() debug entry f2dc06e P2P: Ignore remain-on-channel callback event if not waiting for one 6a6569b HS 2.0R2: Add password to DB in case of machine managed subscription f0d0a5d Improve BSS selection with default noise floor values 7f7bfba Add an option allow canned EAP-Success for wired IEEE 802.1X 49fcc32 EAP-MSCHAPv2 peer: Add option to disable password retry query 66bc683 hostapd: Simplify vlan_add_dynamic error paths 99805a0 Interworking: Convert wpa_printf() to wpa_msg() b42f539 Add a variable to handle extra CFLAGS values e6dd819 Work around Linux packet socket regression 7650f9e Fix resource leaks on rsn_preauth_init() error paths a565e03 dhcp_snoop: Make IPv4 addresses human readable in debug log 2dd4f3a Fix STA re-bind to another VLAN on reauthentication 4437f8f Free old eap_user_file data on configuration change 1180dd6 WPA auth: Disconnect STA if MSK cannot be fetched 40aaa64 WPA auth: Clear temporary MSK storage from stack explicitly 01b481a Convert couple of remaining printf to wpa_printf in ap_list bfaefd5 EAP-PEAP server: Fix Phase 2 TLV length in error case 745d936 mesh: Create new station entry on popen frames 41bff86 mesh: Always free the station if peering failed 871ff0b mesh: Sync plink state with kernel ba42261 Simplify eapol_sm_notify_pmkid_attempt() 993a865 Add eap_session_id to wpa_supplicant STATUS output f19c907 OpenSSL: Implement aes_wrap() and aes_unwrap() fee31f7 OpenSSL: Remove support for versions older than 0.9.8 8bf3030 OpenSSL: Use a common helper function for HMAC 983c6a6 OpenSSL: Replace internal HMAC-MD5 implementation Change-Id: I5743003f14efae324537f7dc2c5e6ada892a33a7 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/l2_packet/l2_packet_privsep.c
|
fb45fd5cfed8bdccd0859c7fc05449fc187e2d06 |
|
05-Jan-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 8b48e3200680f71ae083b84793e6bdc2099416d2 8b48e32 wpa_cli: Add MAC address randomization in scan fb37588 ctrl_iface: Add MAC address randomization in scan processing 56c76fa scan: Add MAC address randomization in scan handling 86056fe nl80211: Handle MAC address randomization in scan/sched_scan ff23ed2 driver: Add definitions for MAC address randomization in scan 7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands 72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel 6b90dea TDLS: Propagate enable/disable channel-switch commands to driver d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS 4daa572 TDLS: Add channel-switch capability flag ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h 8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS 677e7a9 WMM AC: Do not fail on unknown IEs in Association Response fecc2bb WMM AC: Delete tspecs on roaming 20fe745 WMM AC: Print user-priority in wmm_ac_status 730a0d1 nl80211: Always register management frames handler ... 209702d Add possibility to set the setband parameter ee82e33 Do not trigger the scan during initialization on Android platforms e69ae5f Reject new SCAN commands if there is a pending request ... 59d7148 nl80211: Provide subtype and reason code for AP SME drivers 9d4ff04 Add external EAPOL transmission option for testing purposes 61fc904 P2P: Handle improper WPS termination on GO during group formation 58b40fd P2P: Clear p2p_go_group_formation_completed on GO start c155305 Complete sme-connect radio work when clearing connection state debb2da P2P: Report group removal reason PSK_FAILURE in timeout case 51465a0 The master branch is now used for v2.4 development Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
/external/wpa_supplicant_8/src/l2_packet/l2_packet_privsep.c
|
04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4 Author: Jouni Malinen <j@w1.fi> Date: Sat Jul 7 13:01:45 2012 +0300 WPS SSDP: Fix socket leaks on error paths Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/l2_packet/l2_packet_privsep.c
|
c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM - Based on 0c01d65 : Ignore TX status for Data frames from not associated STA Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/l2_packet/l2_packet_privsep.c
|
8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X Based on: commit 0725cc7b7efc434910e89865c42eda7ce61bbf08 Author: Jouni Malinen <j@w1.fi> Date: Thu Apr 21 20:41:01 2011 +0300 Enable CONFIG_DRIVER_NL80211=y in the default configuration nl80211 should be preferred over WEXT with any recent Linux kernel version. Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/l2_packet/l2_packet_privsep.c
|