| 293335998d38c497293b1c41f7ad8342b507d458 |
|
09-Jan-2017 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 05e5e615e6a26d7a9f5bd0569a0baeae1bcdee49
05e5e615e AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad
0c4b9025c AP: Do not look for supported rates in DMG/IEEE 802.11ad
e72faadb4 bgscan_simple: Fix short_scan_count comparison
517b5f928 nl80211: Zero num_modes if nl80211_get_hw_feature_data() fails
39c5da328 nl80211: Use correct attribute for scan flags in vendor scan
c167662d7 eap_proxy: On SIM error flush PMKSAs only for SIM/AKA/AKA' networks
6657bb158 Fix OOM handling in neighbor report response handling
7187e2093 Allow LCI request with no subelements
d73420143 RRM: Enable beacon report with active/passive scan for all drivers
ec45927b8 Report received beacon report with BEACON-RESP-RX event
f3383366a Report beacon request TX status as control interface event
90d9d7c32 Beacon request through hostapd control interface
73a27a634 Add hostapd configuration parameter rrm_beacon_report
de6ec8b55 Enable Beacon Report using beacon table for all drivers
6774c6a9f Update copyright notices for the new year 2017
f56877414 Do not add own BSS in neighbor report with invalid op_class/channel
aeff0645d FILS: Fix FILS Realm Information ANQP-element construction
76196ddb2 wpa_supplicant: Add support for Beacon Report Radio Measurement
b3060bf99 common: Add helper function to convert RSSI to RCPI
1ac4dba31 wpa_supplicant: Extend verify_channel() and make it global
c9ff8e5f6 common: Add function to get an operating class by its number and country
e4f1d879c common: Add non-global to global operating classes conversion
96a5f14ee nl80211: Add support for additional scan parameters for beacon report
c16b9f8d3 driver: Add scan support to beacon report
3c716fdbd wpa_supplicant: Refactor wpas_rrm_build_lci_report()
e1b96e112 wpa_supplicant: Send rejection for unsupported radio measurements
0c73e410d wpa_supplicant: Limit RRM response size to MMPDU size
9664ab8b7 wpa_supplicant: Refactor Radio Measurement Request handling
332bf5d3f wpa_supplicant: Validate RRM request frame format
ec493469f wpa_supplicant: Move RRM implementation to a dedicated file
d1c74f8c9 Add RRM definitions for beacon report measurement
6a31440b8 Fix LCI request subelement processing
ce691a8d9 Add CONFIG_MESH into wpa_supplicant defconfig
67129ab9e wpa_cli: Add commands to use PMKSA_GET/ADD
bbad185c1 P2P: Fix compilation warning in p2p_add_device()
2977f5193 GAS: Remove unnecessarily duplicate gas_frag_limit configuration
1940559ea FT: Drop FT Action frames if ft_over_ds=0
d8de90487 Remove deprecated tx_queue_* params from hostapd.conf notes
78022c836 Fix memory leak on hostapd eap_user_file parsing error paths
02f999c6d hostapd: Remove unnecessary NULL check from parser functions
fd5f29e7e Fix memory leak in hostapd BSS_TM_REQ error path handling
95de34a10 Remove trailing whitespace
45997cce4 hostapd: Add TERMINATE as per-interface command
546680f81 hostapd: Do not update dtim_period with invalid value
356773058 RADIUS server: Increase maximum number of sessions
a5861afcb hostapd: Do not update invalid wep_key_len_unicast
f78402ace hostapd: Do not update rejected wep_key_len_broadcast
e0ba7efe5 hostapd: Do not update eapol_version with rejected value
9266d00bf hostapd: Reject invalid macaddr_acl value
8628555f9 hostapd: Check driver parameter before replacing previous value
1dfd25a68 Fix hostapd SIGHUP processing before interface is enabled
34e29dfd4 Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call
65dfa8728 mka: Make MKA actor priority configurable
9bcfd5be8 Document new D-Bus WPS properties
77fcbf7ff D-Bus: Use a helper function to get possibly NULL strings
dbf524946 D-Bus: Add DeviceType in WPS property
266097fda D-Bus: Add device serial number in WPS property
3ee6a3ab3 D-Bus: Add model number in WPS property
ae66822cd D-Bus: Add WPS model name as property
318d4b5be D-Bus: Add WPS manufacturer as property
b20f031c6 D-Bus: Add WPS device name as property
4a45dc192 mesh: Show [MESH] flag in print_bss_info()
c04a67deb hostapd_cli: Add completion for get command
bf4167b9d hostapd_cli: Add completion for set command
86adff09e hostapd_cli: Completion for further commands with STA parameter
4f59ad069 hostapd_cli: Use common completion for commands that use stations
62b95eb67 hostapd_cli: Add missing command help descriptions
04f02faac Fix wpa_cipher_to_alg() return type
9187b13ad wpa_supplicant: Add BSS CURRENT control interface command
d7f12e4eb OpenSSL: Make sure local certificate auto chaining is enabled
4be02b71b OpenSSL: Remove SSL_{CTX_,}_clear_options ifdefs
7655bd738 P2P: Do not use wait_time for SD Response TX without fragmentation
1f0fdaf0e Fix race condition between AssocResp callback and 4addr event
a6f3761f7 eap_proxy: Add support for SIM state change indication from eap_proxy
79a54ab9f eap_proxy: Fix eap_proxy_init() prototype to use const eapol_cb
4e118c847 D-Bus: Add 'freq' option to P2P Find method to specify starting channel
e414f4f02 PeerKey: Fix STK 4-way handshake regression
28fb9bb19 PeerKey: Fix EAPOL-Key processing
dfc773172 Android: Add p2p_add_cli_chan=1 option
7508c2ad9 PAE: Make KaY specific details available via control interface
b54f43390 FILS: Make FILS Indication element information available in BSS output
8183aee6c FILS: Add support for building FILS Realm Information ANQP-element
9cad61867 FILS: Add Realm Information ANQP-element in BSS data
26bf70e3d FILS: Separate FILS realm configuration from ERP domain
42b847ac1 FILS: Fix hashed realm name derivation
29062f293 Update various definitions based on IEEE Std 802.11-2016
aaa9c60bc Fix preauth_test build by updating add_pmkid/remove_pmkid callbacks
0babae87a Fix wpa_supplicant build error with IEEE8021X_EAPOL unset
19810d29b Make Beacon IEs available in wpa_supplicant BSS command
274e76f22 mesh: Fix channel configuration in pri/sec switch case
cebda0e3e Make debug print clearer for AP/mesh mode secondary channel issues
3459381dd External persistent storage for PMKSA cache entries
c57931273 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant
655dc4a43 Send "TERMINATING" event from hostapd
5149a0f04 P2P: Set p2p_persistent_group=1 at the time of reading disabled=2
065c029a5 Remove MBO dependency from Supported Operating Classes element
62cd9d792 nl80211: Specify the BSSID in the QCA vendor scan
444930e5b Define an attribute to do a specific BSSID QCA vendor scan
cea761472 Add QCA vendor command definitions for IDs 61-73
cb0cc6efa Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands
c313c8a5d Fix QCA vendor command values for SAR power limits
a5c723adc Interworking: Clear SCANNING state if no network selected
a1836de64 SME: Fix IBSS setup after shared key/FT/FILS association
f49c852b5 P2P: Fix a theoretical out of bounds read in wpas_p2p_select_go_freq()
944d48588 P2P: Fix a theoretical out of bounds read in wpas_p2p_setup_freqs()
0a6c9dc70 P2P: Send P2P-DEVICE-FOUND event on peer changing device name
9a431d493 WFD: Clear wfd_subelems when P2P peer stops sending them
6e374bd44 Ignore scan results from ongoing scan when FLUSH command is issued
71ac93453 Make update_idx available in BSS control interface command
49aa88bb5 P2P: Clear PEER_WAITING_RESPONSE on GO Negotiation success
c79238b6a Define a QCA vendor command to configure SAR Power limits
0f5eb69f8 Use eloop timeout for post-EAP-Failure wait before disconnection
20b1a9e23 Allow hostapd wep_key# parameters to be cleared
5ec3d510e wpa_passphrase: Reject invalid passphrase
Test: Wifi Suite
Change-Id: Ida52ca4e43bbc326a89d4c9848529df2d545b692
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| d97138ded63ac5388da3a2b63dea563c8b44c8ec |
|
28-Dec-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 324ade51e168f28430f4429849becd0f08d507c0
324ade5 TLS: Make tls_cert_chain_failure_event() more robust
c6231b5 TLS: Remove storing of never-read value
15a6813 Remove unnecessary cleanup assignment in SHA1Final()
ef3866a nl80211: Don't call linux_iface_up() for a dedicated P2P Device
c2ed779 mesh: Document Mesh Peering Management element structure in more detail
b2817cd mesh: Check PMKID in AMPE Action frames
6c33eed mesh: Fix PMKID to match the standard
ede7770 wpa_supplicant: Do not wait for monitor on P2P Device interface
1c94570 Do not wait for monitor to attach if no control interface
f98674a Clone default LIBS value to LIBS_* for other tools
7d2f674 Add "GET_CAPABILITY acs" to allow ACS build option to be detected
d990971 wpa_supplicant: Enable Automatic Channel Selection support for AP mode
96bc508 Handle survey event properly in wpa_supplicant
d39f796 EAP-TNC peer: Remove dead code related to fragmentation
662512e P2PS: Remove dead code
abbbaa4 TNC: Print received IF-TNCCS message as debug ASCII hexdump
d745f02 EAP-TNC peer: Allow fragment_size to be configured
a67e7e5 RADIUS: Add EACCES to list of recognized send() errno values
5bd9be4 Fix RADIUS Called-Station-Id to not escape SSID
0764dd6 TLS client: Multi-OCSP check to cover intermediate CAs
d6b536f Add ocsp=3 configuration parameter for multi-OCSP
0268383 TLS: Move variable declaration to the beginning of the block
b567775 TLS client: OCSP stapling with ocsp_multi option (RFC 6961)
8ea6a27 TLS server: OCSP stapling with ocsp_multi option (RFC 6961)
5addb0d Server configuration for OCSP stapling with ocsp_multi (RFC 6961)
bca0872 TLS server: OCSP stapling
9532bd2 GnuTLS: OCSP stapling on the server side
6241766 Use wpa_msg() for the "RSN: PMKID mismatch" message
e161451 EAP-EKE: Merge identical error return paths
13cb0a6 EAP-EKE: Reject too long Prot() data when building a frame
0ab0de8 Document previously missing key_mgmt values
Change-Id: I9ac7d0da03d8baf4542e276ab20cb56e44bfa33c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| 1b46775bb44f06b3cc285481ff5f7a673559ed7d |
|
14-Dec-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 06f14421ea8644d12a7b0be6b583114869f9c451
06f1442 TLS: Parse OCSPResponse to extract BasicOCSPResponse
d560288 TLS: Parse CertificateStatus message
eeba168 TLS: Add status_request ClientHello extension if OCSP is requested
4303d53 TLS: Parse ServerHello extensions
6b7bb42 TLS: Add minimal support for PKCS #12
5ce2941 TLS: Extend PKCS #5 to support PKCS #12 style key decryption
f6a62df TLS: Fix and complete ASN.1 tag list
3c108b7 EAP peer: External server certificate chain validation
b6e5e14 EAP-FAST peer: Fix PAC parser error messages
5b904b3 EAP-FAST: Check T-PRF result in MSK/EMSK derivation
b1d8c5c EAP-FAST peer: Fix error path handling for Session-Id
36478a1 OpenSSL: Support new API for HMAC/EVP_MD_CTX in OpenSSL 1.1.x-pre1
9257610 FT: Fix FTIE generation for EAPOL-Key msg 3/4
e44bd28 FT: Fix sm->assoc_resp_ftie storing on the AP side
59e78c2 FT: Fix FTIE generation for 4-way handshake after FT protocol run
b0ecbd3 AP: Use more readable version of management group cipher in error cases
651c6a8 Add TEST_ASSOC_IE for WPA/RSN IE testing on AP side
58059e6 FST: Print debug entry on MB IE update based on EVENT_AUTH
af041f9 dbus: Add support for vendor specific elements
5c8acf7 EAP-IKEv2: Check HMAC SHA1/MD5 result
7b991b4 Use proper build config for parsing proxy_arp
4db29e6 TLS: Add support for PKCS #5 v2.0 PBES2
Change-Id: I10b71e4d3573ef60a52ea6ff56afcd3a06a0b7b0
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| d7ff03d48f825360eec2a371e3361306f2fd721b |
|
04-Dec-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit bf3214b59321f67375df1ee85722b2beb74e1f7a
bf3214b P2P: Fix re-invoked client interface completion on data connection
63502c6 P2P: Fix P2P_CANCEL for p2p_in_invitation case
e007d53 EST: Comment out X509_REQ_print calls on Android with BoringSSL
e6f4832 EST: Add CSR generation support with BoringSSL
ed2566a EST: Implement pkcs7_to_cert() with BoringSSL
8d27efa HTTP (curl): OCSP with BoringSSL
213e158 BoringSSL: Move OCSP implementation into a separate file
f846211 BoringSSL: Support new SHA_CTX definition for EAP-SIM PRF
b34c623 OpenSSL: Fix build with current OpenSSL master branch snapshot
759a8a3 nl80211: Cancel all pending TX frame cookies
9ea91cd EAP-EKE peer: Fix memory leak on error path
328f49a P2P: Complete group formation on client data connection
0e559dc WPS: Support parallel UPnP WPS protocol runs
bea48f7 Allow sched_scan_plans to be updated at runtime
32c0226 Add support for configuring scheduled scan plans
09ea430 nl80211: Add support for multiple scan plans for scheduled scan
dd895e9 P2P: Make p2p_go_configured() more robust against unexpected calls
8811988 TLS client: Fix session_resumed status after TLS session ticket use
7fff91a Fix tls_connection_prf() regression with CONFIG_TLS=internal
1adf262 TLS: Add support for extKeyUsage X.509v3 extension
0755577 Add TEST_FAIL() support for internal hash functions
4104267 Fix memory leak on NFC DH generation error path
c5864dc TLS client: Add certificate chain validation failure callbacks
896a97d TLS client: Add support for disabling TLS versions
0cbc22b TLS client: Use TLS_CONN_* flags
20804fe TLS: Add support for tls_get_version()
f2a6ad0 TLS client: Add support for server certificate probing
b115eeb TLS: Add TLS v1.2 signature algorithm support for SHA384 and SHA512
c0acec3 crypto: Add CRYPTO_HASH_ALG_SHA384 and CRYPTO_HASH_ALG_SHA512
0aed915 TLS client: Add signature_algorithms extension into ClientHello
9e8809a TLS client: Validate certificates with SHA384 and SHA512 hashes
6bb6a9c Add SHA384 and SHA512 implementations from LibTomCrypt library
fdc1614 TLS client: Add support for validating server certificate hash
3665776 TLS client: Do not verify CA certificates when ca_cert is not specified
11c9ddb Add TEST_FAIL() condition to aes_128_cbc_encrypt/decrypt()
ea52a46 EAP-SIM peer: Fix memory leak on reauth error path
1a33c94 EAP-SAKE: Fix a typo in attribute parser debug print
53401e9 Abort ongoing scans on FLUSH command
e929eb3 wlantest: Add -N command line argument to remove write buffering
3c41749 hostapd: Add Transmit Power Envelope IE when VHT is enabled
2ea2166 Add control interface command for aborting an ongoing scan
4ead7cf Abort an ongoing scan before connect
4f30add nl80211: Add support for aborting an ongoing scan
5ef0b84 Sync with mac80211-next.git include/uapi/linux/nl80211.h
0530eb1 mesh: Clear wpa_s cipher selection on starting mesh
1d6955e nl80211: Fix SIGNAL_POLL in IBSS and mesh
0f29bc6 IBSS/mesh: Add support for VHT80P80 configuration
c27f4c9 P2P: Add support for VHT 80+80 MHz and 160 MHz
bee5d8e nl80211: Add VHT 160 MHz channel flags
5e1da9c P2P: Define operating classes for VHT 80+80 and 160
ea70811 FST: Improve parsing of Multiband IEs
b47d05a FST: Make FST peer connection check more permissive in hostapd
39c3c9b Remove wpa_supplicant/tests
9b635d0 Remove link_test and test_wpa
9e68742 Fix CONFIG_NO_WPA=y build
eb926f1 Comment out wpas_reenabled_network_time with CONFIG_NO_SCAN_PROCESSING
f231b3d FST: Fix STA MB IEs creation
ed7820b P2P: Add a testing option to force P2P GO CSA
6cbbae2 P2P: Set p2p_go_wait_client in invitation_result() cb
83702b6 Android: Give user the option for selecting browser for HS 2.0 OSU
cadffac wpa_cli: Add an option to set created interface type
0f039e3 Add an option to create interface of a certain type with INTERFACE_ADD
d8a3b66 driver: Make setting up AP optional when creating AP interface
36e8206 Check for LIBRESSL_VERSION_NUMBER in tls_openssl.c
2c51c0b P2P: Clear send action work without waiting on find/stop/listen
6bdc43c AP: Avoid 20/40 MHz co-ex scan if PRI/SEC switch is not allowed
757785d nl80211: Clear ignore_next_local_deauth flag
cb2a926 nl80211: Clear ignore_next_local_deauth and ignore_deauth_event
f32227e Add QCA vendor attribute and event to indicate subnet change status
d38c7be Skip SELECT_NETWORK steps only if already connected or connecting
25eb7fc Fix EAPOL reauth after FT protocol or offloaded PMKSA cache use
f68d491 FT auth: Fix EAPOL reauthentication after FT protocol run
a65efbf Add VHT support for Mesh
a73c984 Set WMM flag to Mesh STA by default
9a8d9f7 Assign QCA vendor command and attribute for Tx power reduction in dB
747ba10 nl80211: Do not return incomplete hw capability info
5e238cc WPS: Reconnect for a failed data connection when STA_AUTOCONNECT is 0
442cc8c dbus: Fix memory leak in sending InvitationReceived signal
0603bcb hostapd: Process MAC ACLs on a station association event (SME in driver)
89a11ad RSN: Remove check for proactive_key_caching while setting PMK offload
d381963 Extend QCA roam event with subnet change indication
Change-Id: I122220f59ef56e25ed2749a37370a40afafa177a
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| d80a401aed31d06f261efd19223cf55d1a2a8228 |
|
06-Nov-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f10ff62e4eda7917a8e28fe492fd98723a5e97c4
f10ff62 Describe preferred mechanism for submitting contributions
fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
73ed03f wpa_supplicant: Add GTK RSC relaxation workaround
ea6030c Restore previous wpa_state in scan-only result handler
1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate
d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves
a34eace dbus: Remove unused dict helper functions
cdcb2d0 wpa_cli: Add support for vendor_elem_* commands
17b7032 EAP peer: Clear ignore flag in INITIALIZE state
1f1e619 Add test programs for checking libwpa_client linking
736b7cb wpa_supplicant/Makefile: Fix libwpa_client build
2e38079 TLS: Fix memory leak with multiple TLS server instances
7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending()
45c3e72 Add frequency to operating class determination for 5 GHz 100..140
e50c50d dbus: Expose interface globals via D-Bus properties
1aa0fb7 dbus: Pass property description to getters/setters
c93b7e1 RSN: Check result of EAPOL-Key frame send request
95be79f Allow -1 as value to disable frag_threshold
bc50bb0 Extend the range of values for the RTS threshold
053693d hostapd: Add feature to start all interfaces at the same time in sync
9578413 Reserve QCA vendor specific nl80211 commands 110..114
5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing
5d1d69a P2P: Filter control chars in group client device name similarly to peer
f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails
1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal
d8fd633 Do not write ERROR level log entries if debug file is not used
67deaa5 l2_packet: Add build option to disable Linux packet socket workaround
fa46426 RSN: Do not try to connect if PMF disabled and AP requires it
8acbe7f WNM: Verify WNM Sleep Mode element length
dacd789 WNM: Mark set TFS buffer const
...
f24b979 OpenSSL: Merge error returns
84d6a17 TLS: Remove unused tls_capabilities()
7867227 ms_funcs: Merge similar return cases
3596361 hw_features: Merge similar return case in check_40mhz_2g4()
aac1efe Reject the initial 4-way handshake if initial GTK setup fails
2da5256 Add backtrace-based error path testing mechanism
55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC
Next patches were skipped due to explicit cherry-pick:
bddc51e RSN: Stop connection attempt on apparent PMK mismatch
3fdaaa8 Throttle control interface event message bursts
a530fe7 Add wpa_supplicant EVENT_TEST control interface command
ee1e3f5 hostapd: Global control interface notifications
2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations
ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS
844dfeb QCA vendor command support to set band to driver
Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| af9da3180dc20f57df1fc1e1811f3df9fa9e6ab5 |
|
03-Apr-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 681278246232029c334117bd6dc7e74c6b179f96
6812782 hlr_auc_gw: Allow Milenage RES length to be reduced
4839f7c wpa_cli: Fix a typo in usage text
a20a361 wpa_supplicant: Clear blacklist on connect
0144ecb Android: wpa_ctrl missing include for sys/stat.h
0bb20ef HS 2.0R2: Allow user to specify spp.xsd file location
97c9991 HS 2.0R2: Add more debugging messages to hs20-osu-client
93c2e60 HS 2.0R2 CA: Improve setup.sh and .conf for more flexibility
02e122a Reschedule scan from wpas_stop_pno if it was postponed
80fd9c3 EAP-PEAP server: Add support for negotiating vendor for Phase 2
a867082 EAP peer: Use 32-bit EAP method type for Phase 2 processing
56dfc49 Fix a typo in configuration parameter documentation
c4b45c6 TLS: Fix memory leaks on tls_connection_set_params() error paths
af85191 Make tls_connection_get_keyblock_size() internal to tls_*.c
94f1fe6 Remove master key extraction from tls_connection_get_keys()
fa0e715 Use tls_connection_prf() for all EAP TLS-based key derivation
df8191d Rename HT 20/40 coex variable to be more descriptive
1d0f42a EAP server: Add debug prints to help asleap testing
2c1cf90 Add wpa_snprintf_hex_sep()
5955cfa ms_funcs: Make challenge_hash() non-static
Change-Id: I0f3e5e5170a61e458949a675641946d95598dc5d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| 6c0da2bb83f6915d8260912362692d1a742e057b |
|
05-Jan-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 8b48e3200680f71ae083b84793e6bdc2099416d2 [DO NOT MERGE]
8b48e32 wpa_cli: Add MAC address randomization in scan
fb37588 ctrl_iface: Add MAC address randomization in scan processing
56c76fa scan: Add MAC address randomization in scan handling
86056fe nl80211: Handle MAC address randomization in scan/sched_scan
ff23ed2 driver: Add definitions for MAC address randomization in scan
7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands
72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel
6b90dea TDLS: Propagate enable/disable channel-switch commands to driver
d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS
4daa572 TDLS: Add channel-switch capability flag
ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h
8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS
677e7a9 WMM AC: Do not fail on unknown IEs in Association Response
fecc2bb WMM AC: Delete tspecs on roaming
20fe745 WMM AC: Print user-priority in wmm_ac_status
730a0d1 nl80211: Always register management frames handler
...
209702d Add possibility to set the setband parameter
ee82e33 Do not trigger the scan during initialization on Android platforms
e69ae5f Reject new SCAN commands if there is a pending request
...
59d7148 nl80211: Provide subtype and reason code for AP SME drivers
9d4ff04 Add external EAPOL transmission option for testing purposes
61fc904 P2P: Handle improper WPS termination on GO during group formation
58b40fd P2P: Clear p2p_go_group_formation_completed on GO start
c155305 Complete sme-connect radio work when clearing connection state
debb2da P2P: Report group removal reason PSK_FAILURE in timeout case
51465a0 The master branch is now used for v2.4 development
Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| 818ea489ef32dcdc7c098d8a336d6e1dd8996112 |
|
10-Mar-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 390b92913a9a1b3a6aaf70e8b5971a7b7c76cabc
390b929 TLS testing: Allow hostapd to be used as a TLS testing tool
994afe3 RADIUS server: Allow TLS implementation add log entries
01f7fe1 RADIUS server: Allow EAP methods to log into SQLite DB
8a57da7 RADIUS server: Add option for storing log information to SQLite DB
f3ef7a2 TLS client: Send decrypt_error on verify_data validation error
129b9b9 TLS: Share a helper function for verifying Signature
6531963 TLS: Use a helper function for calculating ServerKeyExchange hash
65074a2 TLS: Add support for DHE-RSA cipher suites
41ebfe9 TLS server: Enable SHA256-based cipher suites
60b893d wpa_supplicant: Allow external management frame processing for testing
ec33bc6 Enable RADIUS message dumps with excessive debug verbosity
226e357 Revert "bridge: Track inter-BSS usage"
d0ee16e Allow arbitrary RADIUS attributes to be added into Access-Accept
0ac3876 Fix PMF protect disconnection on session timeout
49021c1 Fix hostapd error path regression
Change-Id: Ie0710c036cca2fb370d28684cc5a5d28a075dfc1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| 9bce59c7fef20e34a05f04d1e33a4076083dca0c |
|
12-Sep-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 10-Sep-2012 TOT
commit 762b99db7a76803d1ad274e87caa6fe870d47441
Author: Jouni Malinen <j@w1.fi>
Date: Mon Sep 10 12:33:29 2012 +0200
Fix last_scan_res update existing BSS entry is update
Change-Id: I03f933bf6d7f7e36b0f8ac410fbc37990f127c18
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| c55524ad84d13014e8019491c2b17e5dcf13545a |
|
07-Jul-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 8fd0f0f323a922aa88ec720ee524f7105d3b0f64
Fix D-Bus build without CONFIG_P2P=y
nl80211: Allow AP mode to be started without monitor interface
nl80211: Process association/disassociation events in AP mode
DBus/P2P: Adding decl for PersistentGroupRemoved signal
DBus/P2P: Rectified type of SecondaryDeviceTypes in device property Get
P2P: Only call dev_lost() for devices that have been dev_found()
wpa_cli: Add missing parameter for P2P_GROUP_ADD command
wpa_supplicant: Respect PKG_CONFIG variable if set in the environment
TLS: Add support for tls_disable_time_checks=1 in client mode
hostapd: Clear keys configured when hostapd reloads configuration
Add dbus signal for information about server certification
Move peer certificate wpa_msg() calls to notify.c
wpa_supplicant AP: Disable AP mode on disassoc paths
wpa_s AP mode: Enable HT20 if driver supports it
Allow PMKSA caching to be disabled on Authenticator
FT: Disable PMKSA cache for FT-IEEE8021X
FT: Clear SME ft_used/ft_ies when disconnecting
8fd0f0f323a922aa88ec720ee524f7105d3b0f64
Change-Id: I6ae333196c36ffa7589662d5269fabfc3b994605
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_client.c
|