9839ecd75c832023d4d13fd2917a8c28261ff668 |
|
07-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950 4ec1fd8 FT: Differentiate between FT for station and for AP in build f0259c3 hostapd: Fix own wide bandwidth subelement generation (neighbor report) 0a63635 AP: Use valid status code in wpa_ft_send_rrb_auth_resp() e4b48b7 Extend ieee80211_freq_to_channel_ext() to cover channels 52-64 c433c50 wpa_supplicant: Make CONFIG_MBO independent of CONFIG_AP d044d2f wpa_supplicant: Get scan_result IE also from Beacon frames 451a27b hostapd: Add a configuration to set an AP as stationary 5cb5937 hostapd: Clear location configuration when it is reset f5ec346 hostapd: Fix adding neighbor entry 99b82bf mka: Implement reference counting on data_key 23c3528 mka: Add support for removing SAs 6b6175b mka: Sync structs definitions with IEEE Std 802.1X-2010 6f551ab mka: Remove "channel" hacks from the stack and the macsec_qca driver 7d8f795 Fix typo in DigestAlgorithn f5c15dc Fix typo in eap_example_server.c 59d7cff AP: Disable VHT in TKIP-only configuration 847ee1a wpa_supplicant: Use correct interface type when creating P2P interface 78a3b23 P2P: Clear old P2PS provision data f69939e P2P: Clear listen state during PD-in-FIND 4cc0f90 P2P: Clear P2PS provision state on P2P flush a818425 hostapd: Added signal level to STA tracking a1047f5 Remove duplicate dl_list_init() for global_ctrl_dst 3765c97 hostapd_cli: Remove duplicate const in hostapd_cli_cmd() 8c88922 TDLS: Fix checks on prohibit bits c2ad5b9 nl80211: Update channel information after channel switch notification 913c3e1 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig 81a10a9 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y ea06a08 HS 2.0 server: Remove redundant NULL check 5f99d96 Removed redundant NULL check for sta in hostapd_event_sta_low_ack() 230b2b2 Removed redundant NULL check for b in wpabuf_concat() 641c73f driver.h: Fix a typo in a comment 2e4e4fb nl80211: Allow TDLS trigger modes to be configured to the host driver 14cd203 QCA vendor command to configure the TDLS behavior in the host driver a18563d Extend QCA vendor attribute link layer statistics attribute 95f3703 Add more QCA vendor attribute definitions into qca-vendor.h 87416ea QCA vendor attribute to report frame aggregation failure befdb2d nl80211: Check driver FILS capability 40a4572 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE d8f9342 nl80211: Add support for setting FILS authentication algorithm e76e950 Sync with mac80211-next.git include/uapi/linux/nl80211.h 2a0b86d Note set_key(WPA_ALG_NONE) failure in debug log 061dac1 FILS: Claim FILS capability only if driver supports it ff338fa FILS: Setup EAPOL state machines properly after FILS association (AP) da24c5a FILS: Set TK after association (AP) 07e0117 FILS: Mark connection fully authorized after FILS Association (AP) 706df42 FILS: Association Response processing (STA) e73ffa0 FILS: Add Association Response frame elements and encrypt them (AP) 78815f3 FILS: Decrypt Association Request elements and check Key-Auth (AP) 86cd692 FILS: Add elements to FILS Association Request frame ac56c39 driver: Add option to pass FILS KEK/AAD to the driver for association 783c292 P2P: Check if the pref_freq reported by the driver supports P2P a660993 FILS: Authentication frame processing (STA) c4fd6d8 FILS: Process FILS Authentication frame (AP) ffb62f2 FILS: Add a helper function for status code conversion c1bd4ba FILS: Extend wpa_auth_pmksa_get() to support PMKID matching c30bd28 FILS: Export IEEE 802.1X helper functions a6228b8 ERP: Update client identity based on EAP-Initiate/Re-auth f00b9b8 FILS: Try to use FILS authentication if PMKSA or ERP entry is available 2c2c557 SME: Clear possibly used WPA/RSN IE for new connection 0866ed0 WPA: Add debug print for not-update-own-IEs case 14de9e3 FILS: Include wpa_insert_pmkid() in non-FT builds de57d87 ERP: Make eap_peer_finish() callable c28767e ERP: Make eap_peer_erp_reauth_start() available 5b092fb nl80211: Make full (Re)Association Response frame available 2aa1e48 FILS: Do not clear PTK on FILS Auth/Assoc (AP) a852ab4 FILS: Key-Auth derivation function for FILS SK c089bc5 FILS: PMK-to-PTK key derivation for FILS authentication ce16c48 Rename sae_data to more generic auth_data 6eb1a56 Add QCA vendor command/attr for low level DMG(11ad) RF sector control a2675b3 wpa_cli: Mark number of char *cmd constant e097556 hostapd_cli: Mark number of char *cmd constant c43cf33 wpa_cli: Add completion for ssid config commands 624259d wpa_cli: Add completion for sta, deauthenticate and disassociate 4c43f44 cli: Add list_sta command 85bab32 hostapd_cli: Process events received following control iface commands e054a43 hostapd_cli: Refactor control iface reconnects with common helper aa2ab91 hostapd_cli: Refresh stations list on control interface reconnect 839e4a8 hostapd_cli: Add completion for sta command bc4b680 hostapd_cli: Enable command completion and history for Android cf296a2 hostapd_cli: Add support for cli history file c650f92 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig 5d30f92 wpa_supplicant: Restore permanent MAC address on reassociation e3e2fe3 Always propagate scan results to all interfaces 33111c9 Check for NULL qsort() base pointers 4b5b8a5 WPS: Force BSSID for WPS provisioning step connection bf07e05 ERP: Do not pass full EAP header to eap_peer_erp_reauth_start() 2449791 FILS: Update EAPOL-Key Descriptor Version RX rules (AP) 16eb485 FILS: Handle Group Key msg 1/2 without MIC when using AEAD cipher (STA) 75c8563 FILS: Perform AEAD processing after PTK has been confirmed 0ab1dd0 FILS: Use AEAD cipher to check received EAPOL-Key frames (STA) b729fd8 FILS: Use AEAD cipher to protect EAPOL-Key frames (AP) 3b5b7aa FILS: Use AEAD cipher to check received EAPOL-Key frames (AP) 2022f1d FILS: Use AEAD cipher to protect EAPOL-Key frames (STA) 1049af7 RSN: Pass full PTK to wpa_eapol_key_send() instead of KCK only b986648 FILS: Update EAPOL-Key RX rules for FILS (AP) 352caf0 FILS: Update EAPOL-Key descriptor version rules for RX (STA) 36a50fd FILS: Set EAPOL-Key Key Descriptor Version to 0 with FILS AKMs (AP) 4a26ccd FILS: Set EAPOL-Key Key Info MIC=0 when using AEAD cipher (supplicant) f5ff8ae FILS: Do not add Key MIC field in supplicant when using AEAD cipher dc5bad4 RSN authenticator: Add more debug print details on EAPOL-Key RX 555ff85 wlantest: Recognize EAPOL-Key frames without MIC bit for FILS 6d014ff Make struct wpa_eapol_key easier to use with variable length MIC 94f66e8 FILS: Advertise ERP domain in FILS Indication element c30ed45 FILS: Allow hostapd to select FILS AKM for connection b8ae56e FILS: Allow wpa_supplicant to select FILS AKM for connection 7147a83 FILS: Add FILS flags into wpa_supplicant BSS command output 379e2b4 FILS: Add 'GET_CAPABILITY fils' for runtime check e4d2ce1 FILS: Set FILS Capability bit in management frames from station f55acd9 FILS: Set FILS Capability bit in management frames from AP 198a942 FILS: Add FILS Indication element to Beacon and Probe Response frames 9b7a2b8 FILS: Add wpa_supplicant configuration options 903ecbe FILS: Add hostapd configuration options 274d8b7 FILS: Add definitions for new frames and values 94318a0 FILS: Add AKM definitions 1d29163 FILS: Add new information elements 325a85b Extend AES-SIV implementation to support different key lengths e2991ee Move CRC-32 routine from wlantest to src/utils 150948e test: FT: EAP test for mismatching keys d0175d6 test: FT with locally generated PMK-R0/PMK-R1 from PSK 9659056 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally a25e4ef mka: Add driver op to get macsec capabilities 53b2555 EAP-pwd: Validate Prep field in EAP-pwd-ID/Response 2875e32 EAP-pwd: Fix Prep in EAP-pwd-ID/Response when EAP_PWD_PREP_MS is used 5f5ca28 mka: Pass full structures down to macsec drivers' receive SC ops 8ebfc7c mka: Pass full structures down to macsec drivers' transmit SC ops b70d508 LibreSSL: Fix compatibility for EAP-FAST df42673 LibreSSL: Fix TLS initialization/deinitialization 0d42179 LibreSSL: Fix dh5 code 32d08d5 Add QCA vendor attributes for measurement frequency for FTM/AOA cecdecd mka: Pass full structures down to macsec drivers' receive SA ops 909c1b9 mka: Pass full structures down to macsec drivers' transmit SA ops 7fa5eff mka: Pass full structures down to macsec drivers' packet number ops f75f6e2 mka: Move structs {transmit,receive}_{sa,sc} to a common header 9d3f4a7 autoscan: Add more debug prints for cases where autoscan is not used 98529f3 The master branch is now used for v2.7 development 2462f34 Change version number to v2.6 for the release 5ac8f86 Fix PNO restart flow 14f34a7 Continue scanning if sched_scan stops unexpectedly 1ac3886 Remove disconnected APs from BSS table if likely out-of-range ebf59eb Restart PNO/sched_scan on channel list update 746e5c2 Fix spelling mistakes in number of comments 8b66888 Add explicit enum values for QCA vendor config attributes 8f47917 MBO: Add support to send ANQP request to get cellular preference Test: Wifi Test Suite: b/32709661 Change-Id: I249f5fec85ad69ce3879247b07f0db84136ab996 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
fe31a9a8fff325bfddbf06fc3e9edaf480824bee |
|
09-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Revert "Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950" This reverts commit 78a5dac804c22aa6e4ec8226a864d3b0d6ccddbb. Test: None
/external/wpa_supplicant_8/src/ap/beacon.h
|
78a5dac804c22aa6e4ec8226a864d3b0d6ccddbb |
|
07-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950 4ec1fd8 FT: Differentiate between FT for station and for AP in build f0259c3 hostapd: Fix own wide bandwidth subelement generation (neighbor report) 0a63635 AP: Use valid status code in wpa_ft_send_rrb_auth_resp() e4b48b7 Extend ieee80211_freq_to_channel_ext() to cover channels 52-64 c433c50 wpa_supplicant: Make CONFIG_MBO independent of CONFIG_AP d044d2f wpa_supplicant: Get scan_result IE also from Beacon frames 451a27b hostapd: Add a configuration to set an AP as stationary 5cb5937 hostapd: Clear location configuration when it is reset f5ec346 hostapd: Fix adding neighbor entry 99b82bf mka: Implement reference counting on data_key 23c3528 mka: Add support for removing SAs 6b6175b mka: Sync structs definitions with IEEE Std 802.1X-2010 6f551ab mka: Remove "channel" hacks from the stack and the macsec_qca driver 7d8f795 Fix typo in DigestAlgorithn f5c15dc Fix typo in eap_example_server.c 59d7cff AP: Disable VHT in TKIP-only configuration 847ee1a wpa_supplicant: Use correct interface type when creating P2P interface 78a3b23 P2P: Clear old P2PS provision data f69939e P2P: Clear listen state during PD-in-FIND 4cc0f90 P2P: Clear P2PS provision state on P2P flush a818425 hostapd: Added signal level to STA tracking a1047f5 Remove duplicate dl_list_init() for global_ctrl_dst 3765c97 hostapd_cli: Remove duplicate const in hostapd_cli_cmd() 8c88922 TDLS: Fix checks on prohibit bits c2ad5b9 nl80211: Update channel information after channel switch notification 913c3e1 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig 81a10a9 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y ea06a08 HS 2.0 server: Remove redundant NULL check 5f99d96 Removed redundant NULL check for sta in hostapd_event_sta_low_ack() 230b2b2 Removed redundant NULL check for b in wpabuf_concat() 641c73f driver.h: Fix a typo in a comment 2e4e4fb nl80211: Allow TDLS trigger modes to be configured to the host driver 14cd203 QCA vendor command to configure the TDLS behavior in the host driver a18563d Extend QCA vendor attribute link layer statistics attribute 95f3703 Add more QCA vendor attribute definitions into qca-vendor.h 87416ea QCA vendor attribute to report frame aggregation failure befdb2d nl80211: Check driver FILS capability 40a4572 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE d8f9342 nl80211: Add support for setting FILS authentication algorithm e76e950 Sync with mac80211-next.git include/uapi/linux/nl80211.h 2a0b86d Note set_key(WPA_ALG_NONE) failure in debug log 061dac1 FILS: Claim FILS capability only if driver supports it ff338fa FILS: Setup EAPOL state machines properly after FILS association (AP) da24c5a FILS: Set TK after association (AP) 07e0117 FILS: Mark connection fully authorized after FILS Association (AP) 706df42 FILS: Association Response processing (STA) e73ffa0 FILS: Add Association Response frame elements and encrypt them (AP) 78815f3 FILS: Decrypt Association Request elements and check Key-Auth (AP) 86cd692 FILS: Add elements to FILS Association Request frame ac56c39 driver: Add option to pass FILS KEK/AAD to the driver for association 783c292 P2P: Check if the pref_freq reported by the driver supports P2P a660993 FILS: Authentication frame processing (STA) c4fd6d8 FILS: Process FILS Authentication frame (AP) ffb62f2 FILS: Add a helper function for status code conversion c1bd4ba FILS: Extend wpa_auth_pmksa_get() to support PMKID matching c30bd28 FILS: Export IEEE 802.1X helper functions a6228b8 ERP: Update client identity based on EAP-Initiate/Re-auth f00b9b8 FILS: Try to use FILS authentication if PMKSA or ERP entry is available 2c2c557 SME: Clear possibly used WPA/RSN IE for new connection 0866ed0 WPA: Add debug print for not-update-own-IEs case 14de9e3 FILS: Include wpa_insert_pmkid() in non-FT builds de57d87 ERP: Make eap_peer_finish() callable c28767e ERP: Make eap_peer_erp_reauth_start() available 5b092fb nl80211: Make full (Re)Association Response frame available 2aa1e48 FILS: Do not clear PTK on FILS Auth/Assoc (AP) a852ab4 FILS: Key-Auth derivation function for FILS SK c089bc5 FILS: PMK-to-PTK key derivation for FILS authentication ce16c48 Rename sae_data to more generic auth_data 6eb1a56 Add QCA vendor command/attr for low level DMG(11ad) RF sector control a2675b3 wpa_cli: Mark number of char *cmd constant e097556 hostapd_cli: Mark number of char *cmd constant c43cf33 wpa_cli: Add completion for ssid config commands 624259d wpa_cli: Add completion for sta, deauthenticate and disassociate 4c43f44 cli: Add list_sta command 85bab32 hostapd_cli: Process events received following control iface commands e054a43 hostapd_cli: Refactor control iface reconnects with common helper aa2ab91 hostapd_cli: Refresh stations list on control interface reconnect 839e4a8 hostapd_cli: Add completion for sta command bc4b680 hostapd_cli: Enable command completion and history for Android cf296a2 hostapd_cli: Add support for cli history file c650f92 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig 5d30f92 wpa_supplicant: Restore permanent MAC address on reassociation e3e2fe3 Always propagate scan results to all interfaces 33111c9 Check for NULL qsort() base pointers 4b5b8a5 WPS: Force BSSID for WPS provisioning step connection bf07e05 ERP: Do not pass full EAP header to eap_peer_erp_reauth_start() 2449791 FILS: Update EAPOL-Key Descriptor Version RX rules (AP) 16eb485 FILS: Handle Group Key msg 1/2 without MIC when using AEAD cipher (STA) 75c8563 FILS: Perform AEAD processing after PTK has been confirmed 0ab1dd0 FILS: Use AEAD cipher to check received EAPOL-Key frames (STA) b729fd8 FILS: Use AEAD cipher to protect EAPOL-Key frames (AP) 3b5b7aa FILS: Use AEAD cipher to check received EAPOL-Key frames (AP) 2022f1d FILS: Use AEAD cipher to protect EAPOL-Key frames (STA) 1049af7 RSN: Pass full PTK to wpa_eapol_key_send() instead of KCK only b986648 FILS: Update EAPOL-Key RX rules for FILS (AP) 352caf0 FILS: Update EAPOL-Key descriptor version rules for RX (STA) 36a50fd FILS: Set EAPOL-Key Key Descriptor Version to 0 with FILS AKMs (AP) 4a26ccd FILS: Set EAPOL-Key Key Info MIC=0 when using AEAD cipher (supplicant) f5ff8ae FILS: Do not add Key MIC field in supplicant when using AEAD cipher dc5bad4 RSN authenticator: Add more debug print details on EAPOL-Key RX 555ff85 wlantest: Recognize EAPOL-Key frames without MIC bit for FILS 6d014ff Make struct wpa_eapol_key easier to use with variable length MIC 94f66e8 FILS: Advertise ERP domain in FILS Indication element c30ed45 FILS: Allow hostapd to select FILS AKM for connection b8ae56e FILS: Allow wpa_supplicant to select FILS AKM for connection 7147a83 FILS: Add FILS flags into wpa_supplicant BSS command output 379e2b4 FILS: Add 'GET_CAPABILITY fils' for runtime check e4d2ce1 FILS: Set FILS Capability bit in management frames from station f55acd9 FILS: Set FILS Capability bit in management frames from AP 198a942 FILS: Add FILS Indication element to Beacon and Probe Response frames 9b7a2b8 FILS: Add wpa_supplicant configuration options 903ecbe FILS: Add hostapd configuration options 274d8b7 FILS: Add definitions for new frames and values 94318a0 FILS: Add AKM definitions 1d29163 FILS: Add new information elements 325a85b Extend AES-SIV implementation to support different key lengths e2991ee Move CRC-32 routine from wlantest to src/utils 150948e test: FT: EAP test for mismatching keys d0175d6 test: FT with locally generated PMK-R0/PMK-R1 from PSK 9659056 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally a25e4ef mka: Add driver op to get macsec capabilities 53b2555 EAP-pwd: Validate Prep field in EAP-pwd-ID/Response 2875e32 EAP-pwd: Fix Prep in EAP-pwd-ID/Response when EAP_PWD_PREP_MS is used 5f5ca28 mka: Pass full structures down to macsec drivers' receive SC ops 8ebfc7c mka: Pass full structures down to macsec drivers' transmit SC ops b70d508 LibreSSL: Fix compatibility for EAP-FAST df42673 LibreSSL: Fix TLS initialization/deinitialization 0d42179 LibreSSL: Fix dh5 code 32d08d5 Add QCA vendor attributes for measurement frequency for FTM/AOA cecdecd mka: Pass full structures down to macsec drivers' receive SA ops 909c1b9 mka: Pass full structures down to macsec drivers' transmit SA ops 7fa5eff mka: Pass full structures down to macsec drivers' packet number ops f75f6e2 mka: Move structs {transmit,receive}_{sa,sc} to a common header 9d3f4a7 autoscan: Add more debug prints for cases where autoscan is not used 98529f3 The master branch is now used for v2.7 development 2462f34 Change version number to v2.6 for the release 5ac8f86 Fix PNO restart flow 14f34a7 Continue scanning if sched_scan stops unexpectedly 1ac3886 Remove disconnected APs from BSS table if likely out-of-range ebf59eb Restart PNO/sched_scan on channel list update 746e5c2 Fix spelling mistakes in number of comments 8b66888 Add explicit enum values for QCA vendor config attributes 8f47917 MBO: Add support to send ANQP request to get cellular preference Test: Wifi Test Suite: b/32709661 Change-Id: If11d88f812812543dab6839879e815892a39f963 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
aca489e0b2daec9e67dd611b7a44f47bd1f41e27 |
|
29-Sep-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 5bb7327a697108c880dd31c9e421df386c904b1a 5bb7327 Share a common helper function for restarting sched_scan be7ebd8 wpa_supplicant: Cancel sched_scan on SELECT_NETWORK initiated scan 8b7c5b8 QCA vendor command for antenna diversity feature 61bcc85 Update ChangeLog files for v2.6 64c92c0 MBO: Do not parse reason_detail in non_pref_chan attr (AP) 4a83d4b MBO: Do not add reason_detail in non_pref_chan attr (STA) a483c6f WNM: Add testing option to reject BSS Transition Management Request 2800ec8 MBO: Add QCA vendor option to configure driver to ignore assoc disallow 6ad37d7 MBO: Add support to ignore association disallowed set by AP 320caea Add attributes for QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT 0df12cb IEEE P802.11ah/D10.0 PV1 CCMP test vectors 02adead Add ignore_auth_resp control interface debug parameter ef24ad3 nl80211: Remove unnecessary duplication from nl80211_set_param() 4d584d8 nl80211: Add driver parameter force_bss_selection 04e3d81 Blacklist correct BSSID on authentication timeout dc2744f P2P: Fix common frequencies calculation for a group 5cdd729 P2P: Fix compilation warning in p2p_supplicant.c 14220fe Flush the BSS (scan) entries when an interface becomes disabled b223b55 doc: Remove duplicate description for -t cee0be7 Show mode=mesh in STATUS command 0d7eba5 Define a QCA vendor command to validate encryption engine 4428194 taxonomy: Store Probe Request frames in hostapd_sta_info 04059ab Passive Client Taxonomy 5e99339 Initialize iface->sta_seen on allocation 4424aa5 P2P: Fix D-Bus persistent parameter in group started event on GO 81258ef Remove unused generation of Request Authenticator in Account-Request ea19b39 Revert "nl80211: Remove duplicated check in nl80211_setup_ap()" 205d2d1 Fix typos in wpa_supplicant configuration parameter documentation 660103e nl80211: Use the monitor interface only without device_ap_sme support c7f9d44 FST: Fix search for peer's "other" connection a62dea4 Fix mistakes in definition of QCA vendor commands for indoor location 711e3ca Handle NULL return from os_zalloc() in sta_track_add() Test: manual Change-Id: I1d8bd5d084c3e72594004d10ceb254a2f766dfab Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
d80a401aed31d06f261efd19223cf55d1a2a8228 |
|
06-Nov-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f10ff62e4eda7917a8e28fe492fd98723a5e97c4 f10ff62 Describe preferred mechanism for submitting contributions fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function 73ed03f wpa_supplicant: Add GTK RSC relaxation workaround ea6030c Restore previous wpa_state in scan-only result handler 1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves a34eace dbus: Remove unused dict helper functions cdcb2d0 wpa_cli: Add support for vendor_elem_* commands 17b7032 EAP peer: Clear ignore flag in INITIALIZE state 1f1e619 Add test programs for checking libwpa_client linking 736b7cb wpa_supplicant/Makefile: Fix libwpa_client build 2e38079 TLS: Fix memory leak with multiple TLS server instances 7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending() 45c3e72 Add frequency to operating class determination for 5 GHz 100..140 e50c50d dbus: Expose interface globals via D-Bus properties 1aa0fb7 dbus: Pass property description to getters/setters c93b7e1 RSN: Check result of EAPOL-Key frame send request 95be79f Allow -1 as value to disable frag_threshold bc50bb0 Extend the range of values for the RTS threshold 053693d hostapd: Add feature to start all interfaces at the same time in sync 9578413 Reserve QCA vendor specific nl80211 commands 110..114 5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing 5d1d69a P2P: Filter control chars in group client device name similarly to peer f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails 1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal d8fd633 Do not write ERROR level log entries if debug file is not used 67deaa5 l2_packet: Add build option to disable Linux packet socket workaround fa46426 RSN: Do not try to connect if PMF disabled and AP requires it 8acbe7f WNM: Verify WNM Sleep Mode element length dacd789 WNM: Mark set TFS buffer const ... f24b979 OpenSSL: Merge error returns 84d6a17 TLS: Remove unused tls_capabilities() 7867227 ms_funcs: Merge similar return cases 3596361 hw_features: Merge similar return case in check_40mhz_2g4() aac1efe Reject the initial 4-way handshake if initial GTK setup fails 2da5256 Add backtrace-based error path testing mechanism 55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC Next patches were skipped due to explicit cherry-pick: bddc51e RSN: Stop connection attempt on apparent PMK mismatch 3fdaaa8 Throttle control interface event message bursts a530fe7 Add wpa_supplicant EVENT_TEST control interface command ee1e3f5 hostapd: Global control interface notifications 2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS 844dfeb QCA vendor command support to set band to driver Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
fb79edc9df1f20461e90e478363d207348213d35 |
|
10-Jan-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 95fb2db2420d8fa291fd6423cc6dbcd042f4eb46 95fb2db P2P: Reject group formation on WPS provisioning failure 6fc61e1 Fix TX status processing during AP mode shutdown in wpa_supplicant 90a545c nl80211: Clean up netlink parsing and debug prints b6a9590 Interworking: Keep up to two pending GAS_REQUEST responses 090b8e3 Update copyright notices for the new year 2014 991aa9c nl80211: Move CS supported flag to wpa_driver_capa f0cbb98 Add DRIVER-STATUS command for hostapd 188ebcd EAP-IKEv2 peer: Fix a memory leak in notify round a190189 Remove PEAPv2 support 16a19dd EAP-pwd peer: Allow fragmentation limit to be configured 60bf585 EAP-IKEv2 peer: Allow fragmentation limit to be configured ea6fc58 WPS: Convert printf() debug print to use wpa_printf() c4b8c71 EAP-GPSK: Report CSuite negotiation failure properly 5a0f596 EAP-GPSK: Allow forced algorithm selection to be configured 5f01c3c EAP peer: Improve failure reporting from METHOD with no eapRespData 7271ee8 Fix EAP-GPSK server compilation for SHA256 cipher suite 356d148 Interworking: Add optional freq argument to INTERWORKING_SELECT a09ffd5 Fix req_scan-deplete-timeout and update eloop API for this 083916c P2P: Clear p2p_disabled and p2p_per_sta_psk on FLUSH command 3f45fc4 P2P: Clear services on FLUSH command 1f965e6 Allow external programs to request wpa_radio work items 6428d0a Do not start wpa_radio work during externally triggered scan 6470f47 Remove unneeded scan delay on connection-in-progress 4bb2321 Remove unneeded GAS query delay on connection-in-progress 6ac4b15 Use wpa_radio work for connection b9e6d70 Use radio work for GAS requests e05e130 P2P: Use radio work to protect offchannel Action frame exchanges e1d1c8e Use radio work for P2P Listen requests 1b5d471 Use radio work for P2P scan requests d12a51b Use radio work for scan requests b1ae396 Add framework for exclusive radio operations dd43aaa Add helper functions for cloning and freeing scan parameters 06f9acc Ignore externally triggered scan results with scan_res_handler c9b5559 Clean up ctrl_iface debug prints for monitor events d31b5ac Use cleaner debug print for ctrl_iface commands with private info 9595151 Remove duplicated RX ctrl_iface hexdump 9b85079 Fix scan-cache-clearing operation to avoid unnecessary cases 2f30cac Avoid unnecessary key clearing operations 466bcf9 Remove some unnecessary EAPOL port (un)authorized callbacks 949938a Ask driver to report only new scan results if requested a1a31b6 Remove hostapd dump_file functionality ea23df6 Make EAPOL dump data available through ctrl_iface STA command 96ea74b Convert EAPOL authenticator dump into easier to parse format ca3b71c Remove hostapd dump_file data that is available through ctrl_iface 4c03a2b Make RADIUS server MIB available through control interface f538be3 Add more STA information into the ctrl_iface STA command 101bdc2 Remove forgotten notes about already removed driver wrappers 7006753 Update EAP-FAST note regarding OpenSSL support 17b79e6 nl80211: Initial support for vendor commands and events 5890fa8 WPS: Fix clear-from-timeout handling to avoid race condition c64e3a0 P2P: Send received Presence Response information to ctrl_iface monitors f7fb676 ACS: Mark acs_fail() static 3cf06c9 OpenSSL: Include sha1/sha256 header files to verify declarations 5ace51a WNM: Clean up le16 variable use to avoid sparse warnings c583868 Mark wpas_wps_er_nfc_handover_sel() static 8cf1e68 Move declaration of hostapd_acs_completed() into correct header file 0187c41 Declare wpa_debug_* variables in src/utils/wpa_debug.h fcc6123 Declare wpa_drivers in src/drivers/driver.h 0d79b50 Clear EAPOL Logoff state on FLUSH command 327b01d nl80211: Add driver param for forcing monitor and connect APIs 6f06766 nl80211: Fix nl_mgmt handling in partial error case 4ea6a47 nl80211: Prefer newer scan result over older during duplicate removal 2eef517 nl80211: Report set_supp_port failures in debug log a0bdd19 nl80211: Share a helper function for connect and associate commands e00d546 Remove unnecessary build #ifdef from definitions 4848a38 Get rid of duplicated cipher suite and AKM definitions de4ed4a nl80211: Use helper functions for cipher suite mapping a565084 nl80211: Set control port for NL80211_CMD_COMMAND ef93abd WPS: Clean up UUID debug print 35f3d3e nl80211: Clean up regulatory rule debug prints 880de88 nl80211: Print frame registration match on same debug line 03ed332 Interworking: Allow cred blocks not to be saved to a file 04f7ecc Reset WPA parameters to default values on FLUSH command 152cff6 P2P: Remove WPA_DRIVER_FLAGS_P2P_MGMT option 538d6f4 WPS: Use shorter scan interval during pre-provisioning search 3187fd9 WPS: Replace wpas_wps_in_progress with identical wpas_wps_searching 4414d9e SAE: Fix ECC element y coordinate validation step 069fb47 EAP-EKE: Allow forced algorithm selection to be configured 3a88914 Remove unused information element parsing data dbfb8e8 Remove unnecessary EVENT_RX_ACTION 1450e1e Define __maybe_unused 912b34f Do not process Action frames twice in hostapd SME/MLME 006309b Fix whitespace style 6780713 WPS: Remove unused send_wpabuf() e912986 tests: Verify concurrent WPS protocol run with assigned PIN 8aaafce Make local UUID available through ctrl_iface STATUS command 0e22b8d WPS: Make sure reconfiguration timeout is not left behind on deinit 75d1d0f WPS: Allow testing mode to disable 2.0 functionality f7e2542 Remove unused wps_device_data_dup() c89d9db Remove unnecessary extra tracking of eloop registration c86bf16 Replace unnecessary hex_value() with hex2byte() 7b02375 Clear wps_fragment_size on FLUSH command aa189ac Enable FT with SAE 2d2ecf5 nl80211: Fix protected Action frame reporting for AP mode db76aa6 Fix PeerKey 4-way handshake 7732729 Fix PeerKey deinit behavior 8d321a7 WNM: Move disassociation imminent sending to wnm_ap.c b76f4c2 hostapd: Make STA flags available through ctrl_iface STA command aa03dbd Remove IEEE80211_REQUIRE_AUTH_ACK 121f2ab Remove unused STA flags 3578e66 WNM: Add STA flag to indicate the current WNM-Sleep-Mode state 4776897 WNM: Fix AP processing without wnm_oper driver callback 2025cad WNM: Move ESS Disassoc Imminent sending to a helper function 28ab64a WNM: Minimal processing of BSS Transition Management Query/Response 2cd0f6a WNM: Add Target BSSID into BSS Transition Management Response a8a6a35 WNM: Use nonzero dialog token in BSS Transition Management Query 629edfe WNM: Fix Sleep Mode AP processing in open network 3c1060f WNM: Add debug logs to get the RSSI from the scan results dff1e28 Initial handling of GTK-not-used cipher suite 51e3eaf OpenSSL: Do not accept SSL Client certificate for server 6bf61fb OpenSSL: Use certificates from TLS authentication in OCSP stapling c962947 WPS ER: Fix deinit timeout handling with delayed/failing unsubscribe 7b75c30 WPS: Reschedule AP configuration reload on EAP completion c511b32 WPS: Remove old duplicate network even if key is different 9d2cb3e Make CONFIG_TESTING_OPTIONS=y enable all testing options 662b40b WPS: Reduce scan wait time during WPS processing 015af91 Do not use results from externally requested scan for network selection 1cd93ff Reschedule own scan request if an externally started one is in progress dc3906c Show timing information about scan requests in debug log d81c73b Optional scan id for ctrl_iface SCAN requests a5f40ef Track whether scan was started by us or an external program 18ae237 Fix comment format 88c2d48 Allow passive scan to be requested with SCAN passive=1 3ae3ec2 nl80211: Add scanned frequencies/SSIDs into debug log 69278f7 Remove unused last_scan_full 1f5d2dd Interworking: Allow EAP-FAST to be used 6ffa168 Add GAS-QUERY-START and GAS-QUERY-DONE event messages 93827f4 hostapd: Allow external management frame processing or testing fee5234 Allow channel list to be specified for SCAN command 98eda9c Move int_array helpfer functions to utils/common.c a4cfb48 Add make lcov-html to generate code coverage report bee25cc nl80211: Fetch cipher capabilities from the driver 4daa011 Clean up cipher capability prints 35c2006 Convert wpa_hexdump functions to use void pointer instead of u8 * 5f9c134 Remove obsolete license notifications bd1e328 Android: Remove old WEXT extensions bad5cdf Verify that beacon setup succeeds before proceeding 7d7f7be Verify group key configuration for WPA group 30675c3 Add definitions for new cipher suites from IEEE Std 802.11ac-2013 13b24a7 VHT: Use status code 104 to indicate VHT required ab41595 wpa_supplicant: Fix crash when terminating all interfaces 76aab03 Add secondary channel IE for CSA 8f4713c Store entire CS freq_params and not only freq 13daed5 Include driver.h in hostapd.h a12d345 wpa_supplicant: Use monotonic time for last_scan check 51bffab WPS: Use monotonic time for AP connection attempt 6473e5c wpa_supplicant: Use relative time for TKIP Michael MIC failures 4e1eae1 wpa_supplicant: Use monotonic time for temp-disabled networks 151ab80 P2P: Use monotonic time for GO client waiting 3326f19 IBSS RSN: Use monotonic time for reinit detection 196a217 WPS_UPNP: Use monotonic time for event debouncing 864c9af wps_registrar: Use monotonic time for PBC workaround 61e98e9 wps_registrar: Use monotonic time for PBC session timeout 3647e5a wps_registrar: Use monotonic time for PIN timeout 3618618 rsn_supp: Use monotonic time for PMKSA cache expiry c2be937 wpa_supplicant: Use monotonic time for EAPOL RX workaround e72a001 bgscan: Use monotonic time e05f060 rsn_supp: Do not track expiration time 5870717 RADIUS server: Use monotonic time 4012804 RADIUS client: Use monotonic time acb69ce wpa_supplicant: Use monotonic time for RX/BSS times 46b8d4c wpa_supplicant: Use monotonic time for SA query timeout f073fde EAP server: Remove SIM-DB pending timestamp 636e19a wpa_ctrl: Use monotonic time for request retry loop 7ffe7d2 AP: Use monotonic time for MMIC failure/TKIP countermeasures dd4e32b AP: Use monotonic time for PMKSA cache 0fc545a AP: Use monotonic time for STA accounting 3e06180 bgscan_learn: Start scanning from the first freq f4c73ae bgscan_learn: Fix initial interval 7dab119 bgscan_learn: Avoid redundant frequencies 3727123 bgscan: Stop bgscan only on disassociation b2838ba Update IBSS documentation to include RSN option 429dd9a Advertise QoS Map support based on driver capability 049105b nl80211: Add support for QoS Map configuration 74ddd64 nl80211: Sync with mac80211-next.git 9fcd300 nl80211: Sync with wireless-testing.git Change-Id: Iabdd88d9cabd478a41c3cb0a8d061b425cc1beca Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
e0e48dc666fb14a7bb60264ca87463ba7bc1fe0b |
|
18-Nov-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 107a89448c8a127e9131bc9288b9093720b87781 107a894 P2P: Clean up wpas_p2p_setup_freqs() debug message 7d669cf P2P: Clean up wpas_p2p_init_go_params() 384bdd0 P2P: Prefer VHT channels for initial pick a30d50b P2P: Prefer HT40 channels for initial pick f240710 P2P: Prefer 5 GHz channels for initial pick b2d4aaa P2P: Select VHT channel at random instead of using the first entry ee8f6ea P2P: Select HT40 channel at random instead of using the first entry 5576663 P2P: Move random channel selection into a helper function b17d89b P2P: Fix channel selection for MCC case f86d282 Handle legacy scan interruption of sched_scan/PNO 334bf36 Add chan_switch to ctrl interface of wpa_supplicant and hostapd bf281c1 Add AP channel switch mechanism e44a384 Move AP parameter filling into a helper function 1c4ffa8 nl80211: Add channel switch implementation dcca221 wpa_supplicant: Update channel switch driver interface e1925bd eloop: Remove eloop_none.c 3505743 Sync with wireless-testing.git include/uapi/linux/nl80211.h f6c2b8c Android: Add state message sent after 'status' command 6b49907 Android: Add SSID in supplicant change event 22cf7d7 SCARD: Clean up SIM/USIM selection cea97a0 dbus_new: Add DBus TDLS methods cc4952a Request new scan only for the original interface fa58da2 Remove old mechanism of skipping scan request rescheduling e2f5a98 Deplete scan request if new time is less than remaining dcd25d4 P2P: Use negotiated channel from invitation for persistent GO 800d587 TDLS: Provide external control to specify the peers for setup 795baf7 hostapd: Filter channel list updated events after country code change 146fa9b nl80211: Do not force interface down on deinit 49b4b20 nl80211: Do not for station mode on hostapd deinit 04eff7d nl80211: Remove build time condition on HOSTAPD define 0d547d5 nl80211: Share more code between hostapd and wpa_supplicant 7b7de4c nl80211: Remove read-only last_freq/last_freq_ht Change-Id: Idba1eb8d63480fbc30eee11d0d8e189ccc49ddd3 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4 Author: Jouni Malinen <j@w1.fi> Date: Sat Jul 7 13:01:45 2012 +0300 WPS SSDP: Fix socket leaks on error paths Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91 Author: Neeraj Kumar Garg <neerajkg@broadcom.com> Date: Tue Dec 27 23:21:45 2011 +0200 P2P: Reject p2p_group_add if forced frequency is not acceptable Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|
8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X Based on: commit 0725cc7b7efc434910e89865c42eda7ce61bbf08 Author: Jouni Malinen <j@w1.fi> Date: Thu Apr 21 20:41:01 2011 +0300 Enable CONFIG_DRIVER_NL80211=y in the default configuration nl80211 should be preferred over WEXT with any recent Linux kernel version. Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/beacon.h
|