| 302113d4e44f06e90f90a5903e33ae830edb58a3 |
|
07-Apr-2017 |
Pavlin Radoslavov <pavlin@google.com> |
Add A2DP codec-specific information to dumpsys output
Now we print the following information:
* Current codec name
* Info for each supported codec:
- Priority
- Encoder interval (ms)
- Codec Config: Sampling rate, Bits per sample, Channel mode (MONO/STEREO)
- Selectable codec configuration
- Codec's local capability
- Packet counts (expected/dropped)
- PCM read counts (expected/actual)
- PCM read bytes (expected/actual)
* LDAC codec-specific info:
- LDAC quality mode: HIGH/MID/LOW/ABR
- LDAC saved transmit queue length [used in ABR mode]
* SBC codec-specific info:
- Frames counts (expected/dropped)
Sample of the new format is below:
---
A2DP Codecs State:
Current Codec: LDAC
A2DP LDAC State:
Priority: 1000000
Encoder interval (ms): 20
Config: Rate=96000 Bits=32 Mode=STEREO
Selectable: Rate=44100|48000|88200|96000 Bits=16|24|32 Mode=MONO|STEREO
Local capability: Rate=44100|48000|88200|96000 Bits=16|24|32 Mode=MONO|STEREO
Packet counts (expected/dropped) : 596 / 161
PCM read counts (expected/actual) : 2488 / 2488
PCM read bytes (expected/actual) : 2547712 / 2547712
LDAC quality mode : ABR
LDAC saved transmit queue length : 0
A2DP aptX-HD State:
Priority: 4001
Encoder interval (ms): 0
Config: Invalid
Selectable: Invalid
Local capability: Rate=44100|48000 Bits=24 Mode=STEREO
Packet counts (expected/dropped) : 0 / 0
PCM read counts (expected/actual) : 0 / 0
PCM read bytes (expected/actual) : 0 / 0
A2DP aptX State:
Priority: 3001
Encoder interval (ms): 0
Config: Rate=44100 Bits=16 Mode=STEREO
Selectable: Rate=44100|48000 Bits=16 Mode=STEREO
Local capability: Rate=44100|48000 Bits=16 Mode=STEREO
Packet counts (expected/dropped) : 0 / 0
PCM read counts (expected/actual) : 0 / 0
PCM read bytes (expected/actual) : 0 / 0
A2DP AAC State:
Priority: 2001
Encoder interval (ms): 20
Config: Rate=44100 Bits=16 Mode=STEREO
Selectable: Rate=44100|48000 Bits=16 Mode=STEREO
Local capability: Rate=44100|48000|88200|96000 Bits=16 Mode=STEREO
Packet counts (expected/dropped) : 0 / 0
PCM read counts (expected/actual) : 0 / 0
PCM read bytes (expected/actual) : 0 / 0
A2DP SBC State:
Priority: 1001
Encoder interval (ms): 20
Config: Rate=44100 Bits=16 Mode=STEREO
Selectable: Rate=44100 Bits=16 Mode=STEREO
Local capability: Rate=44100 Bits=16 Mode=STEREO
Packet counts (expected/dropped) : 580 / 0
PCM read counts (expected/actual) : 2900 / 2900
PCM read bytes (expected/actual) : 1484800 / 1484800
Frames counts (expected/dropped) : 3724 / 0
---
Bug: 36567128
Test: Stream A2DP and "adb shell dumpsys bluetooth_manager"
Change-Id: Idd86005b842a4e569b7df91b8bbaf0632ed7f7c9
/system/bt/stack/include/a2dp_sbc_encoder.h
|
| f8e2670d12ee55ec48635ef55a86ecfa643cc761 |
|
11-Jan-2017 |
Pavlin Radoslavov <pavlin@google.com> |
Removed the feeding_init call from tA2DP_ENCODER_INTERFACE
The feeding_init call is not used anymore - it has been superseded
by the newer A2dpCodecs.setCodecAudioConfig() mechanism.
Also, moved aptx_init_framing_params() and aptx_hd_init_framing_params()
calls to the corresponding encoder_update functions.
Test: A2DP streaming to Bluetooth headsets
Change-Id: I52f42b4701d04fe2ddb8f115bb9cd57fe38e2b38
/system/bt/stack/include/a2dp_sbc_encoder.h
|
| 5ce0116fbf5b530d5b93f11312096eade1021c1e |
|
05-Dec-2016 |
Pavlin Radoslavov <pavlin@google.com> |
Add a mechanism for configuring the A2DP Source codecs
* Codec config internal abstraction:
- Add new classes A2dpCodecConfig and A2dpCodecs that (will)
encapsulate all codec-related APIs
- Add unit tests for the above two classes
- Add method A2dpCodecConfig.buildCodecConfig(), and use it when
creating the codec configuration instead of A2DP_InitSource2SinkCodec().
The new method can build the codec config by taking into account
optional user codec-related configuration preferences.
- Use the A2DP codec config API from the hardware/libhardware bt_av.h API
- Replace enum tA2DP_CODEC_SEP_INDEX with btav_a2dp_codec_index_t
from the bt_av.h API
- Move codec-specific functions from stack/include/a2dp_api.h
and stack/a2dp/a2dp_api.cc to stack/include/a2dp_codec_api.h
and stack/a2dp/a2dp_codec_config.cc
- Create a new base class A2dpCodecConfig() to hold some of the
codec-related state, and implement the corresponding A2dpCodecConfigSbc
and A2dpCodecConfigSbcSink derived classes.
- Move A2DP spec-related constants from stack/include/a2dp_api.h
to stack/include/a2dp_constants.h
- Move A2DP-related error codes from stack/include/a2dp_api.h
to stack/include/a2dp_error_codes.h
- Move A2DP SBC spec-related constants from stack/include/a2dp_sbc.h to
stack/include/a2dp_sbc_constants.h
* Implement the backend mechanism for handling user (re)configuration of
A2DP Source codecs as requested via the JNI API calls.
Also, any codec changes are reported back via JNI API callbacks.
The current audio parameter selection (sample rate, bits per
sample, channel mode - mono/stereo) is as follows:
- If the user selected parameters are acceptable (based on
local codec capability and the remote Sink capability),
those parameters are used.
- Else if the Audio HAL's requested parameters are acceptable,
those are used.
- Else if the default settings are acceptable, those are used.
- Else use the best match among the local and the remote device's
capabilities.
* Update the mechanism for handling OTA configuration requests from the
remote Sink device.
- The OTA prefered codec configuration is ignored if the current
codec configuration contains explicit user configuration, or if the
codec configuration for the same codec contains explicit user
configuration.
* Refactor the Audio HAL <-> Bluetooth audio parameter negotiation
mechanism:
The new mechanism gives some flexibility to the Media Framework to
choose the appropriate audio format (sample rate, bits per sample,
and channel mode - mono/stereo), and at the same time allows
the Bluetooth stack to double-check / overwrite the choice.
- out_get_parameters() on the Audio HAL side asks the Bluetooth stack
for all currently supported formats (for the current codec),
and returns them to the Media Framework: sample rate, bits per sample,
and channel mode (mono/stereo).
- The first time adev_open_output_stream() is called on the Audio HAL,
it asks the Bluetooth stack about the audio format currently selected
by the Bluetooth stack (based on codec negotiation with the Sink device,
and User Configuration).
- The second time adev_open_output_stream() is called on the Audio HAL,
its "config" will eventually contain the audio format selected
internally by the Media Framework. That audio format is sent to the
Bluetooth stack.
If that format is acceptable to the Bluetooth stack, the Bluetooth
stack will reconfigure itself internally, and will respond back with
those values. Otherwise, it will respond back with the values that
should be used instead.
* Misc other fixes and refactoring:
- Fix the BTA handling of A2DP codec reconfiguration
- Fix a bug in the implementation of A2DP_BitsSet(), and add the
approriate unit test. Also, fix the code that was using this function
incorrectly.
- The SBC encoder is compiled as a separate library
- Replace leftover usage of "false" with "FALSE" for macros, and
vice-versa for variable values.
Test: A2DP streaming to headsets, TestPlans/71390
Bug: 30958229
Change-Id: I440b6126e2250e33b0075f9789dd93154c007c2b
/system/bt/stack/include/a2dp_sbc_encoder.h
|
| cd02ce9c60da962a7981320b26aada8744718941 |
|
05-Nov-2016 |
Pavlin Radoslavov <pavlin@google.com> |
A2DP Codec related cleanup
* Add new A2DP API and the corresponding unit tests:
- A2DP_InitSource2SinkCodec()
- A2DP_SourceCodecSepIndex()
- A2DP_GetTrackBitsPerSample()
* Use the new API to simplify the codec selection and setup
* Rename A2DP_BldSbcMplHdr() to A2DP_BuildMediaPayloadHeaderSbc()
* Remove the following APIs, because they are not needed anymore:
- A2DP_BuildSinkConfig()
- A2DP_CodecConfigMatchesCapabilities()
- A2DP_SetSourceCodec()
- A2DP_CodecRequiresReconfig()
- A2DP_IsSourceCodecSupported()
* Remove the following generic APIs, and keep only the SBC-specific APIs.
The information returned by those functions is SBC-specific, and doesn't
apply to other codecs:
- A2DP_GetNumberOfSubbands()
- A2DP_GetNumberOfBlocks()
- A2DP_GetAllocationMethodCode()
- A2DP_GetChannelModeCode()
- A2DP_GetSamplingFrequencyCode()
- A2DP_GetMinBitpool()
- A2DP_GetMaxBitpool()
* Rename:
A2DP_GetTrackFrequency() -> A2DP_GetTrackSampleRate()
tA2DP_FEEDING_PARAMS.sampling_freq -> sample_rate
tA2DP_FEEDING_PARAMS.num_channel -> channel_count
tA2DP_FEEDING_PARAMS.bit_per_sample -> bits_per_sample
* Remove btif_a2dp_source_encoder_update(), tA2DP_ENCODER_UPDATE_PARAMS
and associated events and processing mechanism, because they are not
needed anymore.
* Remove tA2DP_ENCODER_INTERFACE.encoder_update, because it is not
used anymore.
Now it is superceded by tA2DP_ENCODER_INTERFACE.encoder_init.
* Fix a bug inside bta_av_api_register() when initializing
the stream control block.
* Refactor bta_av_co_audio_getconfig() and bta_av_co_audio_setconfig()
* Remove tBTA_AV_CO_CB.codec_config_setconfig field, because it is not
needed anymore.
* Remove unused arguments when opening/closing audio stream
* Remove #ifdef BTA_AV_DEBUG guards: BTA_AV_DEBUG is always TRUE
* Remove SBC Mono -> Stereo hack
Test: Manual testing: A2DP streaming to headphones. TestTracker/68727
Change-Id: Ie0b209f7ad6c21c2c6d8d2e6277b86dfa63388c6
/system/bt/stack/include/a2dp_sbc_encoder.h
|
| 397e5a5d6a6e14779af8431734ff605ccc49b2a7 |
|
15-Oct-2016 |
Pavlin Radoslavov <pavlin@google.com> |
Format A2DP-related code with clang-format
clang-format -style=file -i stack/a2dp/a2dp_* stack/include/a2dp_* \
btif/include/btif_a2dp* btif/src/btif_a2dp*
Test: top-level compilation and running A2DP
Change-Id: I66f0a047192b783ac0147def480754daf617dd8d
/system/bt/stack/include/a2dp_sbc_encoder.h
|
| f66f4e95f2b4bc8d36033f2d65b387e32601fcd8 |
|
15-Oct-2016 |
Pavlin Radoslavov <pavlin@google.com> |
A2DP-related renaming: a2d_* to a2dp_*
Test: top-level compilation and running A2DP
Change-Id: Ibbd3176b86667885666bfe29025ec2c120fafce6
/system/bt/stack/include/a2dp_sbc_encoder.h
|