1/* 2 * System-dependent procedures for pppd under Solaris 2. 3 * 4 * Parts re-written by Adi Masputra <adi.masputra@sun.com>, based on 5 * the original sys-svr4.c 6 * 7 * Copyright (c) 2000 by Sun Microsystems, Inc. 8 * All rights reserved. 9 * 10 * Permission to use, copy, modify, and distribute this software and its 11 * documentation is hereby granted, provided that the above copyright 12 * notice appears in all copies. 13 * 14 * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF 15 * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED 16 * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 17 * PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SUN SHALL NOT BE LIABLE FOR 18 * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR 19 * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES 20 * 21 * Copyright (c) 1995-2002 Paul Mackerras. All rights reserved. 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 27 * 1. Redistributions of source code must retain the above copyright 28 * notice, this list of conditions and the following disclaimer. 29 * 30 * 2. The name(s) of the authors of this software must not be used to 31 * endorse or promote products derived from this software without 32 * prior written permission. 33 * 34 * 3. Redistributions of any form whatsoever must retain the following 35 * acknowledgment: 36 * "This product includes software developed by Paul Mackerras 37 * <paulus@samba.org>". 38 * 39 * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO 40 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 41 * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY 42 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 43 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 44 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 45 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 46 * 47 * Derived from main.c and pppd.h, which are: 48 * 49 * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. 50 * 51 * Redistribution and use in source and binary forms, with or without 52 * modification, are permitted provided that the following conditions 53 * are met: 54 * 55 * 1. Redistributions of source code must retain the above copyright 56 * notice, this list of conditions and the following disclaimer. 57 * 58 * 2. Redistributions in binary form must reproduce the above copyright 59 * notice, this list of conditions and the following disclaimer in 60 * the documentation and/or other materials provided with the 61 * distribution. 62 * 63 * 3. The name "Carnegie Mellon University" must not be used to 64 * endorse or promote products derived from this software without 65 * prior written permission. For permission or any legal 66 * details, please contact 67 * Office of Technology Transfer 68 * Carnegie Mellon University 69 * 5000 Forbes Avenue 70 * Pittsburgh, PA 15213-3890 71 * (412) 268-4387, fax: (412) 268-7395 72 * tech-transfer@andrew.cmu.edu 73 * 74 * 4. Redistributions of any form whatsoever must retain the following 75 * acknowledgment: 76 * "This product includes software developed by Computing Services 77 * at Carnegie Mellon University (http://www.cmu.edu/computing/)." 78 * 79 * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO 80 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 81 * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE 82 * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 83 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 84 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 85 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 86 */ 87 88#define RCSID "$Id: sys-solaris.c,v 1.16 2008/01/30 14:26:53 carlsonj Exp $" 89 90#include <limits.h> 91#include <stdio.h> 92#include <stddef.h> 93#include <stdlib.h> 94#include <string.h> 95#include <ctype.h> 96#include <errno.h> 97#include <fcntl.h> 98#include <unistd.h> 99#include <termios.h> 100#ifndef CRTSCTS 101#include <sys/termiox.h> 102#endif 103#include <signal.h> 104#include <utmpx.h> 105#include <stropts.h> 106#include <sys/types.h> 107#include <sys/ioccom.h> 108#include <sys/stream.h> 109#include <sys/stropts.h> 110#include <sys/socket.h> 111#include <sys/sockio.h> 112#include <sys/sysmacros.h> 113#include <sys/systeminfo.h> 114#include <sys/dlpi.h> 115#include <sys/stat.h> 116#include <sys/mkdev.h> 117#include <net/if.h> 118#include <net/if_arp.h> 119#include <net/route.h> 120#include <net/ppp_defs.h> 121#include <net/pppio.h> 122#include <netinet/in.h> 123#ifdef SOL2 124#include <sys/tihdr.h> 125#include <sys/tiuser.h> 126#include <inet/common.h> 127#include <inet/mib2.h> 128#include <sys/ethernet.h> 129#endif 130 131#include "pppd.h" 132#include "fsm.h" 133#include "lcp.h" 134#include "ipcp.h" 135#include "ccp.h" 136 137#if !defined(PPP_DRV_NAME) 138#define PPP_DRV_NAME "ppp" 139#endif /* !defined(PPP_DRV_NAME) */ 140 141#if !defined(PPP_DEV_NAME) 142#define PPP_DEV_NAME "/dev/" PPP_DRV_NAME 143#endif /* !defined(PPP_DEV_NAME) */ 144 145#if !defined(AHDLC_MOD_NAME) 146#define AHDLC_MOD_NAME "ppp_ahdl" 147#endif /* !defined(AHDLC_MOD_NAME) */ 148 149#if !defined(COMP_MOD_NAME) 150#define COMP_MOD_NAME "ppp_comp" 151#endif /* !defined(COMP_MOD_NAME) */ 152 153#if !defined(IP_DEV_NAME) 154#define IP_DEV_NAME "/dev/ip" 155#endif /* !defined(IP_DEV_NAME) */ 156 157#if !defined(IP_MOD_NAME) 158#define IP_MOD_NAME "ip" 159#endif /* !defined(IP_MOD_NAME) */ 160 161#if !defined(UDP_DEV_NAME) && defined(SOL2) 162#define UDP_DEV_NAME "/dev/udp" 163#endif /* !defined(UDP_DEV_NAME) && defined(SOL2) */ 164 165#if !defined(UDP6_DEV_NAME) && defined(SOL2) 166#define UDP6_DEV_NAME "/dev/udp6" 167#endif /* !defined(UDP6_DEV_NAME) && defined(SOL2) */ 168 169static const char rcsid[] = RCSID; 170 171#if defined(SOL2) 172/* 173 * "/dev/udp" is used as a multiplexor to PLINK the interface stream 174 * under. It is used in place of "/dev/ip" since STREAMS will not let 175 * a driver be PLINK'ed under itself, and "/dev/ip" is typically the 176 * driver at the bottom of the tunneling interfaces stream. 177 */ 178static char *mux_dev_name = UDP_DEV_NAME; 179#else 180static char *mux_dev_name = IP_DEV_NAME; 181#endif 182static int pppfd; 183static int fdmuxid = -1; 184static int ipfd; 185static int ipmuxid = -1; 186 187#if defined(INET6) && defined(SOL2) 188static int ip6fd; /* IP file descriptor */ 189static int ip6muxid = -1; /* Multiplexer file descriptor */ 190static int if6_is_up = 0; /* IPv6 interface has been marked up */ 191 192#define _IN6_LLX_FROM_EUI64(l, s, eui64, as) do { \ 193 s->sin6_addr.s6_addr32[0] = htonl(as); \ 194 eui64_copy(eui64, s->sin6_addr.s6_addr32[2]); \ 195 s->sin6_family = AF_INET6; \ 196 l.lifr_addr.ss_family = AF_INET6; \ 197 l.lifr_addrlen = 64; \ 198 l.lifr_addr = laddr; \ 199 } while (0) 200 201#define IN6_LLADDR_FROM_EUI64(l, s, eui64) \ 202 _IN6_LLX_FROM_EUI64(l, s, eui64, 0xfe800000) 203 204#define IN6_LLTOKEN_FROM_EUI64(l, s, eui64) \ 205 _IN6_LLX_FROM_EUI64(l, s, eui64, 0) 206 207#endif /* defined(INET6) && defined(SOL2) */ 208 209#if defined(INET6) && defined(SOL2) 210static char first_ether_name[LIFNAMSIZ]; /* Solaris 8 and above */ 211#else 212static char first_ether_name[IFNAMSIZ]; /* Before Solaris 8 */ 213#define MAXIFS 256 /* Max # of interfaces */ 214#endif /* defined(INET6) && defined(SOL2) */ 215 216static int restore_term; 217static struct termios inittermios; 218#ifndef CRTSCTS 219static struct termiox inittermiox; 220static int termiox_ok; 221#endif 222static struct winsize wsinfo; /* Initial window size info */ 223static pid_t tty_sid; /* original session ID for terminal */ 224 225extern u_char inpacket_buf[]; /* borrowed from main.c */ 226 227#define MAX_POLLFDS 32 228static struct pollfd pollfds[MAX_POLLFDS]; 229static int n_pollfds; 230 231static int link_mtu, link_mru; 232 233#define NMODULES 32 234static int tty_nmodules; 235static char tty_modules[NMODULES][FMNAMESZ+1]; 236static int tty_npushed; 237 238static int if_is_up; /* Interface has been marked up */ 239static u_int32_t remote_addr; /* IP address of peer */ 240static u_int32_t default_route_gateway; /* Gateway for default route added */ 241static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */ 242 243/* Prototypes for procedures local to this file. */ 244static int translate_speed __P((int)); 245static int baud_rate_of __P((int)); 246static int get_ether_addr __P((u_int32_t, struct sockaddr *)); 247static int get_hw_addr __P((char *, u_int32_t, struct sockaddr *)); 248static int get_hw_addr_dlpi __P((char *, struct sockaddr *)); 249static int dlpi_attach __P((int, int)); 250static int dlpi_info_req __P((int)); 251static int dlpi_get_reply __P((int, union DL_primitives *, int, int)); 252static int strioctl __P((int, int, void *, int, int)); 253 254#ifdef SOL2 255/* 256 * sifppa - Sets interface ppa 257 * 258 * without setting the ppa, ip module will return EINVAL upon setting the 259 * interface UP (SIOCSxIFFLAGS). This is because ip module in 2.8 expects 260 * two DLPI_INFO_REQ to be sent down to the driver (below ip) before 261 * IFF_UP can be set. Plumbing the device causes one DLPI_INFO_REQ to 262 * be sent down, and the second DLPI_INFO_REQ is sent upon receiving 263 * IF_UNITSEL (old) or SIOCSLIFNAME (new) ioctls. Such setting of the ppa 264 * is required because the ppp DLPI provider advertises itself as 265 * a DLPI style 2 type, which requires a point of attachment to be 266 * specified. The only way the user can specify a point of attachment 267 * is via SIOCSLIFNAME or IF_UNITSEL. 268 * 269 * Such changes in the behavior of ip module was made to meet new or 270 * evolving standards requirements. 271 * 272 */ 273static int 274sifppa(fd, ppa) 275 int fd; 276 int ppa; 277{ 278 return (int)ioctl(fd, IF_UNITSEL, (char *)&ppa); 279} 280#endif /* SOL2 */ 281 282#if defined(SOL2) && defined(INET6) 283/* 284 * get_first_ethernet - returns the first Ethernet interface name found in 285 * the system, or NULL if none is found 286 * 287 * NOTE: This is the lifreq version (Solaris 8 and above) 288 */ 289char * 290get_first_ethernet() 291{ 292 struct lifnum lifn; 293 struct lifconf lifc; 294 struct lifreq *plifreq; 295 struct lifreq lifr; 296 int fd, num_ifs, i, found; 297 uint_t fl, req_size; 298 char *req; 299 300 fd = socket(AF_INET, SOCK_DGRAM, 0); 301 if (fd < 0) { 302 return 0; 303 } 304 305 /* 306 * Find out how many interfaces are running 307 */ 308 lifn.lifn_family = AF_UNSPEC; 309 lifn.lifn_flags = LIFC_NOXMIT; 310 if (ioctl(fd, SIOCGLIFNUM, &lifn) < 0) { 311 close(fd); 312 error("could not determine number of interfaces: %m"); 313 return 0; 314 } 315 316 num_ifs = lifn.lifn_count; 317 req_size = num_ifs * sizeof(struct lifreq); 318 req = malloc(req_size); 319 if (req == NULL) { 320 close(fd); 321 error("out of memory"); 322 return 0; 323 } 324 325 /* 326 * Get interface configuration info for all interfaces 327 */ 328 lifc.lifc_family = AF_UNSPEC; 329 lifc.lifc_flags = LIFC_NOXMIT; 330 lifc.lifc_len = req_size; 331 lifc.lifc_buf = req; 332 if (ioctl(fd, SIOCGLIFCONF, &lifc) < 0) { 333 close(fd); 334 free(req); 335 error("SIOCGLIFCONF: %m"); 336 return 0; 337 } 338 339 /* 340 * And traverse each interface to look specifically for the first 341 * occurence of an Ethernet interface which has been marked up 342 */ 343 plifreq = lifc.lifc_req; 344 found = 0; 345 for (i = lifc.lifc_len / sizeof(struct lifreq); i > 0; i--, plifreq++) { 346 347 if (strchr(plifreq->lifr_name, ':') != NULL) 348 continue; 349 350 memset(&lifr, 0, sizeof(lifr)); 351 strncpy(lifr.lifr_name, plifreq->lifr_name, sizeof(lifr.lifr_name)); 352 if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { 353 close(fd); 354 free(req); 355 error("SIOCGLIFFLAGS: %m"); 356 return 0; 357 } 358 fl = lifr.lifr_flags; 359 360 if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP)) 361 != (IFF_UP | IFF_BROADCAST)) 362 continue; 363 364 found = 1; 365 break; 366 } 367 free(req); 368 close(fd); 369 370 if (found) { 371 strncpy(first_ether_name, lifr.lifr_name, sizeof(first_ether_name)); 372 return (char *)first_ether_name; 373 } else 374 return NULL; 375} 376#else 377/* 378 * get_first_ethernet - returns the first Ethernet interface name found in 379 * the system, or NULL if none is found 380 * 381 * NOTE: This is the ifreq version (before Solaris 8). 382 */ 383char * 384get_first_ethernet() 385{ 386 struct ifconf ifc; 387 struct ifreq *pifreq; 388 struct ifreq ifr; 389 int fd, num_ifs, i, found; 390 uint_t fl, req_size; 391 char *req; 392 393 fd = socket(AF_INET, SOCK_DGRAM, 0); 394 if (fd < 0) { 395 return 0; 396 } 397 398 /* 399 * Find out how many interfaces are running 400 */ 401 if (ioctl(fd, SIOCGIFNUM, (char *)&num_ifs) < 0) { 402 num_ifs = MAXIFS; 403 } 404 405 req_size = num_ifs * sizeof(struct ifreq); 406 req = malloc(req_size); 407 if (req == NULL) { 408 close(fd); 409 error("out of memory"); 410 return 0; 411 } 412 413 /* 414 * Get interface configuration info for all interfaces 415 */ 416 ifc.ifc_len = req_size; 417 ifc.ifc_buf = req; 418 if (ioctl(fd, SIOCGIFCONF, &ifc) < 0) { 419 close(fd); 420 free(req); 421 error("SIOCGIFCONF: %m"); 422 return 0; 423 } 424 425 /* 426 * And traverse each interface to look specifically for the first 427 * occurence of an Ethernet interface which has been marked up 428 */ 429 pifreq = ifc.ifc_req; 430 found = 0; 431 for (i = ifc.ifc_len / sizeof(struct ifreq); i > 0; i--, pifreq++) { 432 433 if (strchr(pifreq->ifr_name, ':') != NULL) 434 continue; 435 436 memset(&ifr, 0, sizeof(ifr)); 437 strncpy(ifr.ifr_name, pifreq->ifr_name, sizeof(ifr.ifr_name)); 438 if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) { 439 close(fd); 440 free(req); 441 error("SIOCGIFFLAGS: %m"); 442 return 0; 443 } 444 fl = ifr.ifr_flags; 445 446 if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP)) 447 != (IFF_UP | IFF_BROADCAST)) 448 continue; 449 450 found = 1; 451 break; 452 } 453 free(req); 454 close(fd); 455 456 if (found) { 457 strncpy(first_ether_name, ifr.ifr_name, sizeof(first_ether_name)); 458 return (char *)first_ether_name; 459 } else 460 return NULL; 461} 462#endif /* defined(SOL2) && defined(INET6) */ 463 464#if defined(SOL2) 465/* 466 * get_if_hwaddr - get the hardware address for the specified 467 * network interface device. 468 */ 469int 470get_if_hwaddr(u_char *addr, char *if_name) 471{ 472 struct sockaddr s_eth_addr; 473 struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data; 474 475 if (if_name == NULL) 476 return -1; 477 478 /* 479 * Send DL_INFO_REQ to the driver to solicit its MAC address 480 */ 481 if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) { 482 error("could not obtain hardware address for %s", if_name); 483 return -1; 484 } 485 486 memcpy(addr, eth_addr->ether_addr_octet, 6); 487 return 1; 488} 489#endif /* SOL2 */ 490 491#if defined(SOL2) && defined(INET6) 492/* 493 * slifname - Sets interface ppa and flags 494 * 495 * in addition to the comments stated in sifppa(), IFF_IPV6 bit must 496 * be set in order to declare this as an IPv6 interface 497 */ 498static int 499slifname(fd, ppa) 500 int fd; 501 int ppa; 502{ 503 struct lifreq lifr; 504 int ret; 505 506 memset(&lifr, 0, sizeof(lifr)); 507 ret = ioctl(fd, SIOCGLIFFLAGS, &lifr); 508 if (ret < 0) 509 goto slifname_done; 510 511 lifr.lifr_flags |= IFF_IPV6; 512 lifr.lifr_flags &= ~(IFF_BROADCAST | IFF_IPV4); 513 lifr.lifr_ppa = ppa; 514 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 515 516 ret = ioctl(fd, SIOCSLIFNAME, &lifr); 517 518slifname_done: 519 return ret; 520 521 522} 523 524 525/* 526 * ether_to_eui64 - Convert 48-bit Ethernet address into 64-bit EUI 527 * 528 * walks the list of valid ethernet interfaces, and convert the first 529 * found 48-bit MAC address into EUI 64. caller also assumes that 530 * the system has a properly configured Ethernet interface for this 531 * function to return non-zero. 532 */ 533int 534ether_to_eui64(eui64_t *p_eui64) 535{ 536 struct sockaddr s_eth_addr; 537 struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data; 538 char *if_name; 539 540 if ((if_name = get_first_ethernet()) == NULL) { 541 error("no persistent id can be found"); 542 return 0; 543 } 544 545 /* 546 * Send DL_INFO_REQ to the driver to solicit its MAC address 547 */ 548 if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) { 549 error("could not obtain hardware address for %s", if_name); 550 return 0; 551 } 552 553 /* 554 * And convert the EUI-48 into EUI-64, per RFC 2472 [sec 4.1] 555 */ 556 p_eui64->e8[0] = (eth_addr->ether_addr_octet[0] & 0xFF) | 0x02; 557 p_eui64->e8[1] = (eth_addr->ether_addr_octet[1] & 0xFF); 558 p_eui64->e8[2] = (eth_addr->ether_addr_octet[2] & 0xFF); 559 p_eui64->e8[3] = 0xFF; 560 p_eui64->e8[4] = 0xFE; 561 p_eui64->e8[5] = (eth_addr->ether_addr_octet[3] & 0xFF); 562 p_eui64->e8[6] = (eth_addr->ether_addr_octet[4] & 0xFF); 563 p_eui64->e8[7] = (eth_addr->ether_addr_octet[5] & 0xFF); 564 565 return 1; 566} 567#endif /* defined(SOL2) && defined(INET6) */ 568 569/* 570 * sys_init - System-dependent initialization. 571 */ 572void 573sys_init() 574{ 575 int ifd, x; 576 struct ifreq ifr; 577#if defined(INET6) && defined(SOL2) 578 int i6fd; 579 struct lifreq lifr; 580#endif /* defined(INET6) && defined(SOL2) */ 581#if !defined(SOL2) 582 struct { 583 union DL_primitives prim; 584 char space[64]; 585 } reply; 586#endif /* !defined(SOL2) */ 587 588 ipfd = open(mux_dev_name, O_RDWR, 0); 589 if (ipfd < 0) 590 fatal("Couldn't open IP device: %m"); 591 592#if defined(INET6) && defined(SOL2) 593 ip6fd = open(UDP6_DEV_NAME, O_RDWR, 0); 594 if (ip6fd < 0) 595 fatal("Couldn't open IP device (2): %m"); 596#endif /* defined(INET6) && defined(SOL2) */ 597 598 if (default_device && !notty) 599 tty_sid = getsid((pid_t)0); 600 601 pppfd = open(PPP_DEV_NAME, O_RDWR | O_NONBLOCK, 0); 602 if (pppfd < 0) 603 fatal("Can't open %s: %m", PPP_DEV_NAME); 604 if (kdebugflag & 1) { 605 x = PPPDBG_LOG + PPPDBG_DRIVER; 606 strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0); 607 } 608 609 /* Assign a new PPA and get its unit number. */ 610 if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0) 611 fatal("Can't create new PPP interface: %m"); 612 613#if defined(SOL2) 614 /* 615 * Since sys_init() is called prior to ifname being set in main(), 616 * we need to get the ifname now, otherwise slifname(), and others, 617 * will fail, or maybe, I should move them to a later point ? 618 * <adi.masputra@sun.com> 619 */ 620 sprintf(ifname, PPP_DRV_NAME "%d", ifunit); 621#endif /* defined(SOL2) */ 622 /* 623 * Open the ppp device again and link it under the ip multiplexor. 624 * IP will assign a unit number which hopefully is the same as ifunit. 625 * I don't know any way to be certain they will be the same. :-( 626 */ 627 ifd = open(PPP_DEV_NAME, O_RDWR, 0); 628 if (ifd < 0) 629 fatal("Can't open %s (2): %m", PPP_DEV_NAME); 630 if (kdebugflag & 1) { 631 x = PPPDBG_LOG + PPPDBG_DRIVER; 632 strioctl(ifd, PPPIO_DEBUG, &x, sizeof(int), 0); 633 } 634 635#if defined(INET6) && defined(SOL2) 636 i6fd = open(PPP_DEV_NAME, O_RDWR, 0); 637 if (i6fd < 0) { 638 close(ifd); 639 fatal("Can't open %s (3): %m", PPP_DEV_NAME); 640 } 641 if (kdebugflag & 1) { 642 x = PPPDBG_LOG + PPPDBG_DRIVER; 643 strioctl(i6fd, PPPIO_DEBUG, &x, sizeof(int), 0); 644 } 645#endif /* defined(INET6) && defined(SOL2) */ 646 647#if defined(SOL2) 648 if (ioctl(ifd, I_PUSH, IP_MOD_NAME) < 0) { 649 close(ifd); 650#if defined(INET6) 651 close(i6fd); 652#endif /* defined(INET6) */ 653 fatal("Can't push IP module: %m"); 654 } 655 656 /* 657 * Assign ppa according to the unit number returned by ppp device 658 * after plumbing is completed above. 659 */ 660 if (sifppa(ifd, ifunit) < 0) { 661 close (ifd); 662#if defined(INET6) 663 close(i6fd); 664#endif /* defined(INET6) */ 665 fatal("Can't set ppa for unit %d: %m", ifunit); 666 } 667 668#if defined(INET6) 669 /* 670 * An IPv6 interface is created anyway, even when the user does not 671 * explicitly enable it. Note that the interface will be marked 672 * IPv6 during slifname(). 673 */ 674 if (ioctl(i6fd, I_PUSH, IP_MOD_NAME) < 0) { 675 close(ifd); 676 close(i6fd); 677 fatal("Can't push IP module (2): %m"); 678 } 679 680 /* 681 * Assign ppa according to the unit number returned by ppp device 682 * after plumbing is completed above. In addition, mark the interface 683 * as an IPv6 interface. 684 */ 685 if (slifname(i6fd, ifunit) < 0) { 686 close(ifd); 687 close(i6fd); 688 fatal("Can't set ifname for unit %d: %m", ifunit); 689 } 690#endif /* defined(INET6) */ 691 692 ipmuxid = ioctl(ipfd, I_PLINK, ifd); 693 close(ifd); 694 if (ipmuxid < 0) { 695#if defined(INET6) 696 close(i6fd); 697#endif /* defined(INET6) */ 698 fatal("Can't I_PLINK PPP device to IP: %m"); 699 } 700 701 memset(&ifr, 0, sizeof(ifr)); 702 sprintf(ifr.ifr_name, "%s", ifname); 703 ifr.ifr_ip_muxid = ipmuxid; 704 705 /* 706 * In Sol 8 and later, STREAMS dynamic module plumbing feature exists. 707 * This is so that an arbitrary module can be inserted, or deleted, 708 * between ip module and the device driver without tearing down the 709 * existing stream. Such feature requires the mux ids, which is set 710 * by SIOCSIFMUXID (or SIOCLSIFMUXID). 711 */ 712 if (ioctl(ipfd, SIOCSIFMUXID, &ifr) < 0) { 713 ioctl(ipfd, I_PUNLINK, ipmuxid); 714#if defined(INET6) 715 close(i6fd); 716#endif /* defined(INET6) */ 717 fatal("SIOCSIFMUXID: %m"); 718 } 719 720#else /* else if !defined(SOL2) */ 721 722 if (dlpi_attach(ifd, ifunit) < 0 || 723 dlpi_get_reply(ifd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0) { 724 close(ifd); 725 fatal("Can't attach to ppp%d: %m", ifunit); 726 } 727 728 ipmuxid = ioctl(ipfd, I_LINK, ifd); 729 close(ifd); 730 if (ipmuxid < 0) 731 fatal("Can't link PPP device to IP: %m"); 732#endif /* defined(SOL2) */ 733 734#if defined(INET6) && defined(SOL2) 735 ip6muxid = ioctl(ip6fd, I_PLINK, i6fd); 736 close(i6fd); 737 if (ip6muxid < 0) { 738 ioctl(ipfd, I_PUNLINK, ipmuxid); 739 fatal("Can't I_PLINK PPP device to IP (2): %m"); 740 } 741 742 memset(&lifr, 0, sizeof(lifr)); 743 sprintf(lifr.lifr_name, "%s", ifname); 744 lifr.lifr_ip_muxid = ip6muxid; 745 746 /* 747 * Let IP know of the mux id [see comment for SIOCSIFMUXID above] 748 */ 749 if (ioctl(ip6fd, SIOCSLIFMUXID, &lifr) < 0) { 750 ioctl(ipfd, I_PUNLINK, ipmuxid); 751 ioctl(ip6fd, I_PUNLINK, ip6muxid); 752 fatal("Can't link PPP device to IP (2): %m"); 753 } 754#endif /* defined(INET6) && defined(SOL2) */ 755 756#if !defined(SOL2) 757 /* Set the interface name for the link. */ 758 slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), PPP_DRV_NAME "%d", ifunit); 759 ifr.ifr_metric = ipmuxid; 760 if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0) 761 fatal("Can't set interface name %s: %m", ifr.ifr_name); 762#endif /* !defined(SOL2) */ 763 764 n_pollfds = 0; 765} 766 767/* 768 * sys_cleanup - restore any system state we modified before exiting: 769 * mark the interface down, delete default route and/or proxy arp entry. 770 * This should call die() because it's called from die(). 771 */ 772void 773sys_cleanup() 774{ 775#if defined(SOL2) 776 struct ifreq ifr; 777#if defined(INET6) 778 struct lifreq lifr; 779#endif /* defined(INET6) */ 780#endif /* defined(SOL2) */ 781 782#if defined(SOL2) && defined(INET6) 783 if (if6_is_up) 784 sif6down(0); 785#endif /* defined(SOL2) && defined(INET6) */ 786 if (if_is_up) 787 sifdown(0); 788 if (default_route_gateway) 789 cifdefaultroute(0, default_route_gateway, default_route_gateway); 790 if (proxy_arp_addr) 791 cifproxyarp(0, proxy_arp_addr); 792#if defined(SOL2) 793 /* 794 * Make sure we ask ip what the muxid, because 'ifconfig modlist' will 795 * unlink and re-link the modules, causing the muxid to change. 796 */ 797 memset(&ifr, 0, sizeof(ifr)); 798 sprintf(ifr.ifr_name, "%s", ifname); 799 if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) { 800 error("SIOCGIFFLAGS: %m"); 801 return; 802 } 803 804 if (ioctl(ipfd, SIOCGIFMUXID, &ifr) < 0) { 805 error("SIOCGIFMUXID: %m"); 806 return; 807 } 808 809 ipmuxid = ifr.ifr_ip_muxid; 810 811 if (ioctl(ipfd, I_PUNLINK, ipmuxid) < 0) { 812 error("Can't I_PUNLINK PPP from IP: %m"); 813 return; 814 } 815#if defined(INET6) 816 /* 817 * Make sure we ask ip what the muxid, because 'ifconfig modlist' will 818 * unlink and re-link the modules, causing the muxid to change. 819 */ 820 memset(&lifr, 0, sizeof(lifr)); 821 sprintf(lifr.lifr_name, "%s", ifname); 822 if (ioctl(ip6fd, SIOCGLIFFLAGS, &lifr) < 0) { 823 error("SIOCGLIFFLAGS: %m"); 824 return; 825 } 826 827 if (ioctl(ip6fd, SIOCGLIFMUXID, &lifr) < 0) { 828 error("SIOCGLIFMUXID: %m"); 829 return; 830 } 831 832 ip6muxid = lifr.lifr_ip_muxid; 833 834 if (ioctl(ip6fd, I_PUNLINK, ip6muxid) < 0) { 835 error("Can't I_PUNLINK PPP from IP (2): %m"); 836 } 837#endif /* defined(INET6) */ 838#endif /* defined(SOL2) */ 839} 840 841/* 842 * sys_close - Clean up in a child process before execing. 843 */ 844void 845sys_close() 846{ 847 close(ipfd); 848#if defined(INET6) && defined(SOL2) 849 close(ip6fd); 850#endif /* defined(INET6) && defined(SOL2) */ 851 if (pppfd >= 0) 852 close(pppfd); 853} 854 855/* 856 * sys_check_options - check the options that the user specified 857 */ 858int 859sys_check_options() 860{ 861 return 1; 862} 863 864#if 0 865/* 866 * daemon - Detach us from controlling terminal session. 867 */ 868int 869daemon(nochdir, noclose) 870 int nochdir, noclose; 871{ 872 int pid; 873 874 if ((pid = fork()) < 0) 875 return -1; 876 if (pid != 0) 877 exit(0); /* parent dies */ 878 setsid(); 879 if (!nochdir) 880 chdir("/"); 881 if (!noclose) { 882 fclose(stdin); /* don't need stdin, stdout, stderr */ 883 fclose(stdout); 884 fclose(stderr); 885 } 886 return 0; 887} 888#endif 889 890/* 891 * ppp_available - check whether the system has any ppp interfaces 892 */ 893int 894ppp_available() 895{ 896 struct stat buf; 897 898 return stat(PPP_DEV_NAME, &buf) >= 0; 899} 900 901/* 902 * any_compressions - see if compression is enabled or not 903 * 904 * In the STREAMS implementation of kernel-portion pppd, 905 * the comp STREAMS module performs the ACFC, PFC, as well 906 * CCP and VJ compressions. However, if the user has explicitly 907 * declare to not enable them from the command line, there is 908 * no point of having the comp module be pushed on the stream. 909 */ 910static int 911any_compressions() 912{ 913 if ((!lcp_wantoptions[0].neg_accompression) && 914 (!lcp_wantoptions[0].neg_pcompression) && 915 (!ccp_protent.enabled_flag) && 916 (!ipcp_wantoptions[0].neg_vj)) { 917 return 0; 918 } 919 return 1; 920} 921 922/* 923 * tty_establish_ppp - Turn the serial port into a ppp interface. 924 */ 925int 926tty_establish_ppp(fd) 927 int fd; 928{ 929 int i; 930 931 /* Pop any existing modules off the tty stream. */ 932 for (i = 0;; ++i) 933 if (ioctl(fd, I_LOOK, tty_modules[i]) < 0 934 || strcmp(tty_modules[i], "ptem") == 0 935 || ioctl(fd, I_POP, 0) < 0) 936 break; 937 tty_nmodules = i; 938 939 /* Push the async hdlc module and the compressor module. */ 940 tty_npushed = 0; 941 942 if(!sync_serial) { 943 if (ioctl(fd, I_PUSH, AHDLC_MOD_NAME) < 0) { 944 error("Couldn't push PPP Async HDLC module: %m"); 945 return -1; 946 } 947 ++tty_npushed; 948 } 949 if (kdebugflag & 4) { 950 i = PPPDBG_LOG + PPPDBG_AHDLC; 951 strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0); 952 } 953 /* 954 * There's no need to push comp module if we don't intend 955 * to compress anything 956 */ 957 if (any_compressions()) { 958 if (ioctl(fd, I_PUSH, COMP_MOD_NAME) < 0) 959 error("Couldn't push PPP compression module: %m"); 960 else 961 ++tty_npushed; 962 } 963 964 if (kdebugflag & 2) { 965 i = PPPDBG_LOG; 966 if (any_compressions()) 967 i += PPPDBG_COMP; 968 strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0); 969 } 970 971 /* Link the serial port under the PPP multiplexor. */ 972 if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0) { 973 error("Can't link tty to PPP mux: %m"); 974 return -1; 975 } 976 977 return pppfd; 978} 979 980/* 981 * tty_disestablish_ppp - Restore the serial port to normal operation. 982 * It attempts to reconstruct the stream with the previously popped 983 * modules. This shouldn't call die() because it's called from die(). 984 */ 985void 986tty_disestablish_ppp(fd) 987 int fd; 988{ 989 int i; 990 991 if (fdmuxid >= 0) { 992 if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) { 993 if (!hungup) 994 error("Can't unlink tty from PPP mux: %m"); 995 } 996 fdmuxid = -1; 997 998 if (!hungup) { 999 while (tty_npushed > 0 && ioctl(fd, I_POP, 0) >= 0) 1000 --tty_npushed; 1001 for (i = tty_nmodules - 1; i >= 0; --i) 1002 if (ioctl(fd, I_PUSH, tty_modules[i]) < 0) 1003 error("Couldn't restore tty module %s: %m", 1004 tty_modules[i]); 1005 } 1006 if (hungup && default_device && tty_sid > 0) { 1007 /* 1008 * If we have received a hangup, we need to send a SIGHUP 1009 * to the terminal's controlling process. The reason is 1010 * that the original stream head for the terminal hasn't 1011 * seen the M_HANGUP message (it went up through the ppp 1012 * driver to the stream head for our fd to /dev/ppp). 1013 */ 1014 kill(tty_sid, SIGHUP); 1015 } 1016 } 1017} 1018 1019/* 1020 * Check whether the link seems not to be 8-bit clean. 1021 */ 1022void 1023clean_check() 1024{ 1025 int x; 1026 char *s; 1027 1028 if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0) 1029 return; 1030 s = NULL; 1031 switch (~x) { 1032 case RCV_B7_0: 1033 s = "bit 7 set to 1"; 1034 break; 1035 case RCV_B7_1: 1036 s = "bit 7 set to 0"; 1037 break; 1038 case RCV_EVNP: 1039 s = "odd parity"; 1040 break; 1041 case RCV_ODDP: 1042 s = "even parity"; 1043 break; 1044 } 1045 if (s != NULL) { 1046 warn("Serial link is not 8-bit clean:"); 1047 warn("All received characters had %s", s); 1048 } 1049} 1050 1051/* 1052 * List of valid speeds. 1053 */ 1054struct speed { 1055 int speed_int, speed_val; 1056} speeds[] = { 1057#ifdef B50 1058 { 50, B50 }, 1059#endif 1060#ifdef B75 1061 { 75, B75 }, 1062#endif 1063#ifdef B110 1064 { 110, B110 }, 1065#endif 1066#ifdef B134 1067 { 134, B134 }, 1068#endif 1069#ifdef B150 1070 { 150, B150 }, 1071#endif 1072#ifdef B200 1073 { 200, B200 }, 1074#endif 1075#ifdef B300 1076 { 300, B300 }, 1077#endif 1078#ifdef B600 1079 { 600, B600 }, 1080#endif 1081#ifdef B1200 1082 { 1200, B1200 }, 1083#endif 1084#ifdef B1800 1085 { 1800, B1800 }, 1086#endif 1087#ifdef B2000 1088 { 2000, B2000 }, 1089#endif 1090#ifdef B2400 1091 { 2400, B2400 }, 1092#endif 1093#ifdef B3600 1094 { 3600, B3600 }, 1095#endif 1096#ifdef B4800 1097 { 4800, B4800 }, 1098#endif 1099#ifdef B7200 1100 { 7200, B7200 }, 1101#endif 1102#ifdef B9600 1103 { 9600, B9600 }, 1104#endif 1105#ifdef B19200 1106 { 19200, B19200 }, 1107#endif 1108#ifdef B38400 1109 { 38400, B38400 }, 1110#endif 1111#ifdef EXTA 1112 { 19200, EXTA }, 1113#endif 1114#ifdef EXTB 1115 { 38400, EXTB }, 1116#endif 1117#ifdef B57600 1118 { 57600, B57600 }, 1119#endif 1120#ifdef B76800 1121 { 76800, B76800 }, 1122#endif 1123#ifdef B115200 1124 { 115200, B115200 }, 1125#endif 1126#ifdef B153600 1127 { 153600, B153600 }, 1128#endif 1129#ifdef B230400 1130 { 230400, B230400 }, 1131#endif 1132#ifdef B307200 1133 { 307200, B307200 }, 1134#endif 1135#ifdef B460800 1136 { 460800, B460800 }, 1137#endif 1138 { 0, 0 } 1139}; 1140 1141/* 1142 * Translate from bits/second to a speed_t. 1143 */ 1144static int 1145translate_speed(bps) 1146 int bps; 1147{ 1148 struct speed *speedp; 1149 1150 if (bps == 0) 1151 return 0; 1152 for (speedp = speeds; speedp->speed_int; speedp++) 1153 if (bps == speedp->speed_int) 1154 return speedp->speed_val; 1155 warn("speed %d not supported", bps); 1156 return 0; 1157} 1158 1159/* 1160 * Translate from a speed_t to bits/second. 1161 */ 1162static int 1163baud_rate_of(speed) 1164 int speed; 1165{ 1166 struct speed *speedp; 1167 1168 if (speed == 0) 1169 return 0; 1170 for (speedp = speeds; speedp->speed_int; speedp++) 1171 if (speed == speedp->speed_val) 1172 return speedp->speed_int; 1173 return 0; 1174} 1175 1176/* 1177 * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity, 1178 * at the requested speed, etc. If `local' is true, set CLOCAL 1179 * regardless of whether the modem option was specified. 1180 */ 1181void 1182set_up_tty(fd, local) 1183 int fd, local; 1184{ 1185 int speed; 1186 struct termios tios; 1187#if !defined (CRTSCTS) 1188 struct termiox tiox; 1189#endif 1190 1191 if (!sync_serial && tcgetattr(fd, &tios) < 0) 1192 fatal("tcgetattr: %m"); 1193 1194#ifndef CRTSCTS 1195 termiox_ok = 1; 1196 if (!sync_serial && ioctl (fd, TCGETX, &tiox) < 0) { 1197 termiox_ok = 0; 1198 if (errno != ENOTTY) 1199 error("TCGETX: %m"); 1200 } 1201#endif 1202 1203 if (!restore_term) { 1204 inittermios = tios; 1205#ifndef CRTSCTS 1206 inittermiox = tiox; 1207#endif 1208 if (!sync_serial) 1209 ioctl(fd, TIOCGWINSZ, &wsinfo); 1210 } 1211 1212 tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL); 1213#ifdef CRTSCTS 1214 if (crtscts > 0) 1215 tios.c_cflag |= CRTSCTS; 1216 else if (crtscts < 0) 1217 tios.c_cflag &= ~CRTSCTS; 1218#else 1219 if (crtscts != 0 && !termiox_ok) { 1220 error("Can't set RTS/CTS flow control"); 1221 } else if (crtscts > 0) { 1222 tiox.x_hflag |= RTSXOFF|CTSXON; 1223 } else if (crtscts < 0) { 1224 tiox.x_hflag &= ~(RTSXOFF|CTSXON); 1225 } 1226#endif 1227 1228 if (stop_bits >= 2) 1229 tios.c_cflag |= CSTOPB; 1230 1231 tios.c_cflag |= CS8 | CREAD | HUPCL; 1232 if (local || !modem) 1233 tios.c_cflag |= CLOCAL; 1234 tios.c_iflag = IGNBRK | IGNPAR; 1235 tios.c_oflag = 0; 1236 tios.c_lflag = 0; 1237 tios.c_cc[VMIN] = 1; 1238 tios.c_cc[VTIME] = 0; 1239 1240 if (crtscts == -2) { 1241 tios.c_iflag |= IXON | IXOFF; 1242 tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */ 1243 tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */ 1244 } 1245 1246 speed = translate_speed(inspeed); 1247 if (speed) { 1248 cfsetospeed(&tios, speed); 1249 cfsetispeed(&tios, speed); 1250 } else { 1251 speed = cfgetospeed(&tios); 1252 /* 1253 * We can't proceed if the serial port speed is 0, 1254 * since that implies that the serial port is disabled. 1255 */ 1256 if ((speed == B0) && !sync_serial) 1257 fatal("Baud rate for %s is 0; need explicit baud rate", devnam); 1258 } 1259 1260 if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &tios) < 0) 1261 fatal("tcsetattr: %m"); 1262 1263#ifndef CRTSCTS 1264 if (!sync_serial && termiox_ok && ioctl (fd, TCSETXF, &tiox) < 0){ 1265 error("TCSETXF: %m"); 1266 } 1267#endif 1268 1269 baud_rate = inspeed = baud_rate_of(speed); 1270 if (!sync_serial) 1271 restore_term = 1; 1272} 1273 1274/* 1275 * restore_tty - restore the terminal to the saved settings. 1276 */ 1277void 1278restore_tty(fd) 1279 int fd; 1280{ 1281 if (restore_term) { 1282 if (!default_device) { 1283 /* 1284 * Turn off echoing, because otherwise we can get into 1285 * a loop with the tty and the modem echoing to each other. 1286 * We presume we are the sole user of this tty device, so 1287 * when we close it, it will revert to its defaults anyway. 1288 */ 1289 inittermios.c_lflag &= ~(ECHO | ECHONL); 1290 } 1291 if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &inittermios) < 0) 1292 if (!hungup && errno != ENXIO) 1293 warn("tcsetattr: %m"); 1294#ifndef CRTSCTS 1295 if (!sync_serial && ioctl (fd, TCSETXF, &inittermiox) < 0){ 1296 if (!hungup && errno != ENXIO) 1297 error("TCSETXF: %m"); 1298 } 1299#endif 1300 if (!sync_serial) 1301 ioctl(fd, TIOCSWINSZ, &wsinfo); 1302 restore_term = 0; 1303 } 1304} 1305 1306/* 1307 * setdtr - control the DTR line on the serial port. 1308 * This is called from die(), so it shouldn't call die(). 1309 */ 1310void 1311setdtr(fd, on) 1312int fd, on; 1313{ 1314 int modembits = TIOCM_DTR; 1315 1316 ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits); 1317} 1318 1319/* 1320 * open_loopback - open the device we use for getting packets 1321 * in demand mode. Under Solaris 2, we use our existing fd 1322 * to the ppp driver. 1323 */ 1324int 1325open_ppp_loopback() 1326{ 1327 return pppfd; 1328} 1329 1330/* 1331 * output - Output PPP packet. 1332 */ 1333void 1334output(unit, p, len) 1335 int unit; 1336 u_char *p; 1337 int len; 1338{ 1339 struct strbuf data; 1340 int retries; 1341 struct pollfd pfd; 1342 1343 dump_packet("sent", p, len); 1344 if (snoop_send_hook) snoop_send_hook(p, len); 1345 1346 data.len = len; 1347 data.buf = (caddr_t) p; 1348 retries = 4; 1349 while (putmsg(pppfd, NULL, &data, 0) < 0) { 1350 if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) { 1351 if (errno != ENXIO) 1352 error("Couldn't send packet: %m"); 1353 break; 1354 } 1355 pfd.fd = pppfd; 1356 pfd.events = POLLOUT; 1357 poll(&pfd, 1, 250); /* wait for up to 0.25 seconds */ 1358 } 1359} 1360 1361 1362/* 1363 * wait_input - wait until there is data available, 1364 * for the length of time specified by *timo (indefinite 1365 * if timo is NULL). 1366 */ 1367void 1368wait_input(timo) 1369 struct timeval *timo; 1370{ 1371 int t; 1372 1373 t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000; 1374 if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR) 1375 fatal("poll: %m"); 1376} 1377 1378/* 1379 * add_fd - add an fd to the set that wait_input waits for. 1380 */ 1381void add_fd(fd) 1382 int fd; 1383{ 1384 int n; 1385 1386 for (n = 0; n < n_pollfds; ++n) 1387 if (pollfds[n].fd == fd) 1388 return; 1389 if (n_pollfds < MAX_POLLFDS) { 1390 pollfds[n_pollfds].fd = fd; 1391 pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP; 1392 ++n_pollfds; 1393 } else 1394 error("Too many inputs!"); 1395} 1396 1397/* 1398 * remove_fd - remove an fd from the set that wait_input waits for. 1399 */ 1400void remove_fd(fd) 1401 int fd; 1402{ 1403 int n; 1404 1405 for (n = 0; n < n_pollfds; ++n) { 1406 if (pollfds[n].fd == fd) { 1407 while (++n < n_pollfds) 1408 pollfds[n-1] = pollfds[n]; 1409 --n_pollfds; 1410 break; 1411 } 1412 } 1413} 1414 1415#if 0 1416/* 1417 * wait_loop_output - wait until there is data available on the 1418 * loopback, for the length of time specified by *timo (indefinite 1419 * if timo is NULL). 1420 */ 1421void 1422wait_loop_output(timo) 1423 struct timeval *timo; 1424{ 1425 wait_input(timo); 1426} 1427 1428/* 1429 * wait_time - wait for a given length of time or until a 1430 * signal is received. 1431 */ 1432void 1433wait_time(timo) 1434 struct timeval *timo; 1435{ 1436 int n; 1437 1438 n = select(0, NULL, NULL, NULL, timo); 1439 if (n < 0 && errno != EINTR) 1440 fatal("select: %m"); 1441} 1442#endif 1443 1444 1445/* 1446 * read_packet - get a PPP packet from the serial device. 1447 */ 1448int 1449read_packet(buf) 1450 u_char *buf; 1451{ 1452 struct strbuf ctrl, data; 1453 int flags, len; 1454 unsigned char ctrlbuf[sizeof(union DL_primitives) + 64]; 1455 1456 for (;;) { 1457 data.maxlen = PPP_MRU + PPP_HDRLEN; 1458 data.buf = (caddr_t) buf; 1459 ctrl.maxlen = sizeof(ctrlbuf); 1460 ctrl.buf = (caddr_t) ctrlbuf; 1461 flags = 0; 1462 len = getmsg(pppfd, &ctrl, &data, &flags); 1463 if (len < 0) { 1464 if (errno == EAGAIN || errno == EINTR) 1465 return -1; 1466 fatal("Error reading packet: %m"); 1467 } 1468 1469 if (ctrl.len <= 0) 1470 return data.len; 1471 1472 /* 1473 * Got a M_PROTO or M_PCPROTO message. Interpret it 1474 * as a DLPI primitive?? 1475 */ 1476 if (debug) 1477 dbglog("got dlpi prim 0x%x, len=%d", 1478 ((union DL_primitives *)ctrlbuf)->dl_primitive, ctrl.len); 1479 1480 } 1481} 1482 1483/* 1484 * get_loop_output - get outgoing packets from the ppp device, 1485 * and detect when we want to bring the real link up. 1486 * Return value is 1 if we need to bring up the link, 0 otherwise. 1487 */ 1488int 1489get_loop_output() 1490{ 1491 int len; 1492 int rv = 0; 1493 1494 while ((len = read_packet(inpacket_buf)) > 0) { 1495 if (loop_frame(inpacket_buf, len)) 1496 rv = 1; 1497 } 1498 return rv; 1499} 1500 1501/* 1502 * netif_set_mtu - set the MTU on the PPP network interface. 1503 */ 1504void 1505netif_set_mtu(unit, mtu) 1506 int unit, mtu; 1507{ 1508 struct ifreq ifr; 1509#if defined(INET6) && defined(SOL2) 1510 struct lifreq lifr; 1511 int fd; 1512#endif /* defined(INET6) && defined(SOL2) */ 1513 1514 memset(&ifr, 0, sizeof(ifr)); 1515 strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); 1516 ifr.ifr_metric = link_mtu; 1517 if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) { 1518 error("Couldn't set IP MTU (%s): %m", ifr.ifr_name); 1519 } 1520 1521#if defined(INET6) && defined(SOL2) 1522 fd = socket(AF_INET6, SOCK_DGRAM, 0); 1523 if (fd < 0) 1524 error("Couldn't open IPv6 socket: %m"); 1525 1526 memset(&lifr, 0, sizeof(lifr)); 1527 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1528 lifr.lifr_mtu = link_mtu; 1529 if (ioctl(fd, SIOCSLIFMTU, &lifr) < 0) { 1530 close(fd); 1531 error("Couldn't set IPv6 MTU (%s): %m", ifr.ifr_name); 1532 } 1533 close(fd); 1534#endif /* defined(INET6) && defined(SOL2) */ 1535} 1536 1537/* 1538 * tty_send_config - configure the transmit characteristics of 1539 * the ppp interface. 1540 */ 1541void 1542tty_send_config(mtu, asyncmap, pcomp, accomp) 1543 int mtu; 1544 u_int32_t asyncmap; 1545 int pcomp, accomp; 1546{ 1547 int cf[2]; 1548 1549 link_mtu = mtu; 1550 if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) { 1551 if (hungup && errno == ENXIO) { 1552 ++error_count; 1553 return; 1554 } 1555 error("Couldn't set MTU: %m"); 1556 } 1557 if (fdmuxid >= 0) { 1558 if (!sync_serial) { 1559 if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) 1560 error("Couldn't set transmit ACCM: %m"); 1561 } 1562 cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0); 1563 cf[1] = COMP_PROT | COMP_AC; 1564 if (any_compressions() && 1565 strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) 1566 error("Couldn't set prot/AC compression: %m"); 1567 } 1568} 1569 1570/* 1571 * tty_set_xaccm - set the extended transmit ACCM for the interface. 1572 */ 1573void 1574tty_set_xaccm(accm) 1575 ext_accm accm; 1576{ 1577 if (sync_serial) 1578 return; 1579 1580 if (fdmuxid >= 0 1581 && strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) { 1582 if (!hungup || errno != ENXIO) 1583 warn("Couldn't set extended ACCM: %m"); 1584 } 1585} 1586 1587/* 1588 * tty_recv_config - configure the receive-side characteristics of 1589 * the ppp interface. 1590 */ 1591void 1592tty_recv_config(mru, asyncmap, pcomp, accomp) 1593 int mru; 1594 u_int32_t asyncmap; 1595 int pcomp, accomp; 1596{ 1597 int cf[2]; 1598 1599 link_mru = mru; 1600 if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) { 1601 if (hungup && errno == ENXIO) { 1602 ++error_count; 1603 return; 1604 } 1605 error("Couldn't set MRU: %m"); 1606 } 1607 if (fdmuxid >= 0) { 1608 if (!sync_serial) { 1609 if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) 1610 error("Couldn't set receive ACCM: %m"); 1611 } 1612 cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0); 1613 cf[1] = DECOMP_PROT | DECOMP_AC; 1614 if (any_compressions() && 1615 strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) 1616 error("Couldn't set prot/AC decompression: %m"); 1617 } 1618} 1619 1620/* 1621 * ccp_test - ask kernel whether a given compression method 1622 * is acceptable for use. 1623 */ 1624int 1625ccp_test(unit, opt_ptr, opt_len, for_transmit) 1626 int unit, opt_len, for_transmit; 1627 u_char *opt_ptr; 1628{ 1629 if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP), 1630 opt_ptr, opt_len, 0) >= 0) 1631 return 1; 1632 return (errno == ENOSR)? 0: -1; 1633} 1634 1635/* 1636 * ccp_flags_set - inform kernel about the current state of CCP. 1637 */ 1638void 1639ccp_flags_set(unit, isopen, isup) 1640 int unit, isopen, isup; 1641{ 1642 int cf[2]; 1643 1644 cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0); 1645 cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR; 1646 if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) { 1647 if (!hungup || errno != ENXIO) 1648 error("Couldn't set kernel CCP state: %m"); 1649 } 1650} 1651 1652/* 1653 * get_idle_time - return how long the link has been idle. 1654 */ 1655int 1656get_idle_time(u, ip) 1657 int u; 1658 struct ppp_idle *ip; 1659{ 1660 return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0; 1661} 1662 1663/* 1664 * get_ppp_stats - return statistics for the link. 1665 */ 1666int 1667get_ppp_stats(u, stats) 1668 int u; 1669 struct pppd_stats *stats; 1670{ 1671 struct ppp_stats s; 1672 1673 if (!sync_serial && 1674 strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) { 1675 error("Couldn't get link statistics: %m"); 1676 return 0; 1677 } 1678 stats->bytes_in = s.p.ppp_ibytes; 1679 stats->bytes_out = s.p.ppp_obytes; 1680 stats->pkts_in = s.p.ppp_ipackets; 1681 stats->pkts_out = s.p.ppp_opackets; 1682 return 1; 1683} 1684 1685#if 0 1686/* 1687 * set_filters - transfer the pass and active filters to the kernel. 1688 */ 1689int 1690set_filters(pass, active) 1691 struct bpf_program *pass, *active; 1692{ 1693 int ret = 1; 1694 1695 if (pass->bf_len > 0) { 1696 if (strioctl(pppfd, PPPIO_PASSFILT, pass, 1697 sizeof(struct bpf_program), 0) < 0) { 1698 error("Couldn't set pass-filter in kernel: %m"); 1699 ret = 0; 1700 } 1701 } 1702 if (active->bf_len > 0) { 1703 if (strioctl(pppfd, PPPIO_ACTIVEFILT, active, 1704 sizeof(struct bpf_program), 0) < 0) { 1705 error("Couldn't set active-filter in kernel: %m"); 1706 ret = 0; 1707 } 1708 } 1709 return ret; 1710} 1711#endif 1712 1713/* 1714 * ccp_fatal_error - returns 1 if decompression was disabled as a 1715 * result of an error detected after decompression of a packet, 1716 * 0 otherwise. This is necessary because of patent nonsense. 1717 */ 1718int 1719ccp_fatal_error(unit) 1720 int unit; 1721{ 1722 int cf[2]; 1723 1724 cf[0] = cf[1] = 0; 1725 if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) { 1726 if (errno != ENXIO && errno != EINVAL) 1727 error("Couldn't get compression flags: %m"); 1728 return 0; 1729 } 1730 return cf[0] & CCP_FATALERROR; 1731} 1732 1733/* 1734 * sifvjcomp - config tcp header compression 1735 */ 1736int 1737sifvjcomp(u, vjcomp, xcidcomp, xmaxcid) 1738 int u, vjcomp, xcidcomp, xmaxcid; 1739{ 1740 int cf[2]; 1741 char maxcid[2]; 1742 1743 if (vjcomp) { 1744 maxcid[0] = xcidcomp; 1745 maxcid[1] = 15; /* XXX should be rmaxcid */ 1746 if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) { 1747 error("Couldn't initialize VJ compression: %m"); 1748 } 1749 } 1750 1751 cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0) /* XXX this is wrong */ 1752 + (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0); 1753 cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID; 1754 if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) { 1755 if (vjcomp) 1756 error("Couldn't enable VJ compression: %m"); 1757 } 1758 1759 return 1; 1760} 1761 1762/* 1763 * sifup - Config the interface up and enable IP packets to pass. 1764 */ 1765int 1766sifup(u) 1767 int u; 1768{ 1769 struct ifreq ifr; 1770 1771 strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); 1772 if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) { 1773 error("Couldn't mark interface up (get): %m"); 1774 return 0; 1775 } 1776 ifr.ifr_flags |= IFF_UP; 1777 if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) { 1778 error("Couldn't mark interface up (set): %m"); 1779 return 0; 1780 } 1781 if_is_up = 1; 1782 return 1; 1783} 1784 1785/* 1786 * sifdown - Config the interface down and disable IP. 1787 */ 1788int 1789sifdown(u) 1790 int u; 1791{ 1792 struct ifreq ifr; 1793 1794 if (ipmuxid < 0) 1795 return 1; 1796 strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); 1797 if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) { 1798 error("Couldn't mark interface down (get): %m"); 1799 return 0; 1800 } 1801 ifr.ifr_flags &= ~IFF_UP; 1802 if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) { 1803 error("Couldn't mark interface down (set): %m"); 1804 return 0; 1805 } 1806 if_is_up = 0; 1807 return 1; 1808} 1809 1810/* 1811 * sifnpmode - Set the mode for handling packets for a given NP. 1812 */ 1813int 1814sifnpmode(u, proto, mode) 1815 int u; 1816 int proto; 1817 enum NPmode mode; 1818{ 1819 int npi[2]; 1820 1821 npi[0] = proto; 1822 npi[1] = (int) mode; 1823 if (strioctl(pppfd, PPPIO_NPMODE, &npi, 2 * sizeof(int), 0) < 0) { 1824 error("ioctl(set NP %d mode to %d): %m", proto, mode); 1825 return 0; 1826 } 1827 return 1; 1828} 1829 1830#if defined(SOL2) && defined(INET6) 1831/* 1832 * sif6up - Config the IPv6 interface up and enable IPv6 packets to pass. 1833 */ 1834int 1835sif6up(u) 1836 int u; 1837{ 1838 struct lifreq lifr; 1839 int fd; 1840 1841 fd = socket(AF_INET6, SOCK_DGRAM, 0); 1842 if (fd < 0) { 1843 return 0; 1844 } 1845 1846 memset(&lifr, 0, sizeof(lifr)); 1847 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1848 if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { 1849 close(fd); 1850 return 0; 1851 } 1852 1853 lifr.lifr_flags |= IFF_UP; 1854 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1855 if (ioctl(fd, SIOCSLIFFLAGS, &lifr) < 0) { 1856 close(fd); 1857 return 0; 1858 } 1859 1860 if6_is_up = 1; 1861 close(fd); 1862 return 1; 1863} 1864 1865/* 1866 * sifdown - Config the IPv6 interface down and disable IPv6. 1867 */ 1868int 1869sif6down(u) 1870 int u; 1871{ 1872 struct lifreq lifr; 1873 int fd; 1874 1875 fd = socket(AF_INET6, SOCK_DGRAM, 0); 1876 if (fd < 0) 1877 return 0; 1878 1879 memset(&lifr, 0, sizeof(lifr)); 1880 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1881 if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { 1882 close(fd); 1883 return 0; 1884 } 1885 1886 lifr.lifr_flags &= ~IFF_UP; 1887 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1888 if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { 1889 close(fd); 1890 return 0; 1891 } 1892 1893 if6_is_up = 0; 1894 close(fd); 1895 return 1; 1896} 1897 1898/* 1899 * sif6addr - Config the interface with an IPv6 link-local address 1900 */ 1901int 1902sif6addr(u, o, h) 1903 int u; 1904 eui64_t o, h; 1905{ 1906 struct lifreq lifr; 1907 struct sockaddr_storage laddr; 1908 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&laddr; 1909 int fd; 1910 1911 fd = socket(AF_INET6, SOCK_DGRAM, 0); 1912 if (fd < 0) 1913 return 0; 1914 1915 memset(&lifr, 0, sizeof(lifr)); 1916 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1917 1918 /* 1919 * Do this because /dev/ppp responds to DL_PHYS_ADDR_REQ with 1920 * zero values, hence the interface token came to be zero too, 1921 * and without this, in.ndpd will complain 1922 */ 1923 IN6_LLTOKEN_FROM_EUI64(lifr, sin6, o); 1924 if (ioctl(fd, SIOCSLIFTOKEN, &lifr) < 0) { 1925 close(fd); 1926 return 0; 1927 } 1928 1929 /* 1930 * Set the interface address and destination address 1931 */ 1932 IN6_LLADDR_FROM_EUI64(lifr, sin6, o); 1933 if (ioctl(fd, SIOCSLIFADDR, &lifr) < 0) { 1934 close(fd); 1935 return 0; 1936 } 1937 1938 memset(&lifr, 0, sizeof(lifr)); 1939 strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); 1940 IN6_LLADDR_FROM_EUI64(lifr, sin6, h); 1941 if (ioctl(fd, SIOCSLIFDSTADDR, &lifr) < 0) { 1942 close(fd); 1943 return 0; 1944 } 1945 1946 return 1; 1947} 1948 1949/* 1950 * cif6addr - Remove the IPv6 address from interface 1951 */ 1952int 1953cif6addr(u, o, h) 1954 int u; 1955 eui64_t o, h; 1956{ 1957 return 1; 1958} 1959 1960#endif /* defined(SOL2) && defined(INET6) */ 1961 1962 1963#define INET_ADDR(x) (((struct sockaddr_in *) &(x))->sin_addr.s_addr) 1964 1965/* 1966 * sifaddr - Config the interface IP addresses and netmask. 1967 */ 1968int 1969sifaddr(u, o, h, m) 1970 int u; 1971 u_int32_t o, h, m; 1972{ 1973 struct ifreq ifr; 1974 int ret = 1; 1975 1976 memset(&ifr, 0, sizeof(ifr)); 1977 strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); 1978 ifr.ifr_addr.sa_family = AF_INET; 1979 INET_ADDR(ifr.ifr_addr) = m; 1980 if (ioctl(ipfd, SIOCSIFNETMASK, &ifr) < 0) { 1981 error("Couldn't set IP netmask: %m"); 1982 ret = 0; 1983 } 1984 ifr.ifr_addr.sa_family = AF_INET; 1985 INET_ADDR(ifr.ifr_addr) = o; 1986 if (ioctl(ipfd, SIOCSIFADDR, &ifr) < 0) { 1987 error("Couldn't set local IP address: %m"); 1988 ret = 0; 1989 } 1990 1991 /* 1992 * On some systems, we have to explicitly set the point-to-point 1993 * flag bit before we can set a destination address. 1994 */ 1995 if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) >= 0 1996 && (ifr.ifr_flags & IFF_POINTOPOINT) == 0) { 1997 ifr.ifr_flags |= IFF_POINTOPOINT; 1998 if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) { 1999 error("Couldn't mark interface pt-to-pt: %m"); 2000 ret = 0; 2001 } 2002 } 2003 ifr.ifr_dstaddr.sa_family = AF_INET; 2004 INET_ADDR(ifr.ifr_dstaddr) = h; 2005 if (ioctl(ipfd, SIOCSIFDSTADDR, &ifr) < 0) { 2006 error("Couldn't set remote IP address: %m"); 2007 ret = 0; 2008 } 2009 2010 remote_addr = h; 2011 return ret; 2012} 2013 2014/* 2015 * cifaddr - Clear the interface IP addresses, and delete routes 2016 * through the interface if possible. 2017 */ 2018int 2019cifaddr(u, o, h) 2020 int u; 2021 u_int32_t o, h; 2022{ 2023#if defined(__USLC__) /* was: #if 0 */ 2024 cifroute(unit, ouraddr, hisaddr); 2025 if (ipmuxid >= 0) { 2026 notice("Removing ppp interface unit"); 2027 if (ioctl(ipfd, I_UNLINK, ipmuxid) < 0) { 2028 error("Can't remove ppp interface unit: %m"); 2029 return 0; 2030 } 2031 ipmuxid = -1; 2032 } 2033#endif 2034 remote_addr = 0; 2035 return 1; 2036} 2037 2038/* 2039 * sifdefaultroute - assign a default route through the address given. 2040 */ 2041int 2042sifdefaultroute(u, l, g) 2043 int u; 2044 u_int32_t l, g; 2045{ 2046 struct rtentry rt; 2047 2048#if defined(__USLC__) 2049 g = l; /* use the local address as gateway */ 2050#endif 2051 memset(&rt, 0, sizeof(rt)); 2052 rt.rt_dst.sa_family = AF_INET; 2053 INET_ADDR(rt.rt_dst) = 0; 2054 rt.rt_gateway.sa_family = AF_INET; 2055 INET_ADDR(rt.rt_gateway) = g; 2056 rt.rt_flags = RTF_GATEWAY; 2057 2058 if (ioctl(ipfd, SIOCADDRT, &rt) < 0) { 2059 error("Can't add default route: %m"); 2060 return 0; 2061 } 2062 2063 default_route_gateway = g; 2064 return 1; 2065} 2066 2067/* 2068 * cifdefaultroute - delete a default route through the address given. 2069 */ 2070int 2071cifdefaultroute(u, l, g) 2072 int u; 2073 u_int32_t l, g; 2074{ 2075 struct rtentry rt; 2076 2077#if defined(__USLC__) 2078 g = l; /* use the local address as gateway */ 2079#endif 2080 memset(&rt, 0, sizeof(rt)); 2081 rt.rt_dst.sa_family = AF_INET; 2082 INET_ADDR(rt.rt_dst) = 0; 2083 rt.rt_gateway.sa_family = AF_INET; 2084 INET_ADDR(rt.rt_gateway) = g; 2085 rt.rt_flags = RTF_GATEWAY; 2086 2087 if (ioctl(ipfd, SIOCDELRT, &rt) < 0) { 2088 error("Can't delete default route: %m"); 2089 return 0; 2090 } 2091 2092 default_route_gateway = 0; 2093 return 1; 2094} 2095 2096/* 2097 * sifproxyarp - Make a proxy ARP entry for the peer. 2098 */ 2099int 2100sifproxyarp(unit, hisaddr) 2101 int unit; 2102 u_int32_t hisaddr; 2103{ 2104 struct arpreq arpreq; 2105 2106 memset(&arpreq, 0, sizeof(arpreq)); 2107 if (!get_ether_addr(hisaddr, &arpreq.arp_ha)) 2108 return 0; 2109 2110 arpreq.arp_pa.sa_family = AF_INET; 2111 INET_ADDR(arpreq.arp_pa) = hisaddr; 2112 arpreq.arp_flags = ATF_PERM | ATF_PUBL; 2113 if (ioctl(ipfd, SIOCSARP, (caddr_t) &arpreq) < 0) { 2114 error("Couldn't set proxy ARP entry: %m"); 2115 return 0; 2116 } 2117 2118 proxy_arp_addr = hisaddr; 2119 return 1; 2120} 2121 2122/* 2123 * cifproxyarp - Delete the proxy ARP entry for the peer. 2124 */ 2125int 2126cifproxyarp(unit, hisaddr) 2127 int unit; 2128 u_int32_t hisaddr; 2129{ 2130 struct arpreq arpreq; 2131 2132 memset(&arpreq, 0, sizeof(arpreq)); 2133 arpreq.arp_pa.sa_family = AF_INET; 2134 INET_ADDR(arpreq.arp_pa) = hisaddr; 2135 if (ioctl(ipfd, SIOCDARP, (caddr_t)&arpreq) < 0) { 2136 error("Couldn't delete proxy ARP entry: %m"); 2137 return 0; 2138 } 2139 2140 proxy_arp_addr = 0; 2141 return 1; 2142} 2143 2144/* 2145 * get_ether_addr - get the hardware address of an interface on the 2146 * the same subnet as ipaddr. 2147 */ 2148#define MAX_IFS 32 2149 2150static int 2151get_ether_addr(ipaddr, hwaddr) 2152 u_int32_t ipaddr; 2153 struct sockaddr *hwaddr; 2154{ 2155 struct ifreq *ifr, *ifend, ifreq; 2156 int nif; 2157 struct ifconf ifc; 2158 u_int32_t ina, mask; 2159 2160 /* 2161 * Scan through the system's network interfaces. 2162 */ 2163#ifdef SIOCGIFNUM 2164 if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0) 2165#endif 2166 nif = MAX_IFS; 2167 ifc.ifc_len = nif * sizeof(struct ifreq); 2168 ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len); 2169 if (ifc.ifc_buf == 0) 2170 return 0; 2171 if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) { 2172 warn("Couldn't get system interface list: %m"); 2173 free(ifc.ifc_buf); 2174 return 0; 2175 } 2176 ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len); 2177 for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) { 2178 if (ifr->ifr_addr.sa_family != AF_INET) 2179 continue; 2180 /* 2181 * Check that the interface is up, and not point-to-point or loopback. 2182 */ 2183 strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name)); 2184 if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0) 2185 continue; 2186 if ((ifreq.ifr_flags & 2187 (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP)) 2188 != (IFF_UP|IFF_BROADCAST)) 2189 continue; 2190 /* 2191 * Get its netmask and check that it's on the right subnet. 2192 */ 2193 if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0) 2194 continue; 2195 ina = INET_ADDR(ifr->ifr_addr); 2196 mask = INET_ADDR(ifreq.ifr_addr); 2197 if ((ipaddr & mask) == (ina & mask)) 2198 break; 2199 } 2200 2201 if (ifr >= ifend) { 2202 warn("No suitable interface found for proxy ARP"); 2203 free(ifc.ifc_buf); 2204 return 0; 2205 } 2206 2207 info("found interface %s for proxy ARP", ifr->ifr_name); 2208 if (!get_hw_addr(ifr->ifr_name, ina, hwaddr)) { 2209 error("Couldn't get hardware address for %s", ifr->ifr_name); 2210 free(ifc.ifc_buf); 2211 return 0; 2212 } 2213 2214 free(ifc.ifc_buf); 2215 return 1; 2216} 2217 2218/* 2219 * get_hw_addr_dlpi - obtain the hardware address using DLPI 2220 */ 2221static int 2222get_hw_addr_dlpi(name, hwaddr) 2223 char *name; 2224 struct sockaddr *hwaddr; 2225{ 2226 char *q; 2227 int unit, iffd, adrlen; 2228 unsigned char *adrp; 2229 char ifdev[24]; 2230 struct { 2231 union DL_primitives prim; 2232 char space[64]; 2233 } reply; 2234 2235 /* 2236 * We have to open the device and ask it for its hardware address. 2237 * First split apart the device name and unit. 2238 */ 2239 slprintf(ifdev, sizeof(ifdev), "/dev/%s", name); 2240 for (q = ifdev + strlen(ifdev); --q >= ifdev; ) 2241 if (!isdigit(*q)) 2242 break; 2243 unit = atoi(q+1); 2244 q[1] = 0; 2245 2246 /* 2247 * Open the device and do a DLPI attach and phys_addr_req. 2248 */ 2249 iffd = open(ifdev, O_RDWR); 2250 if (iffd < 0) { 2251 error("Can't open %s: %m", ifdev); 2252 return 0; 2253 } 2254 if (dlpi_attach(iffd, unit) < 0 2255 || dlpi_get_reply(iffd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0 2256 || dlpi_info_req(iffd) < 0 2257 || dlpi_get_reply(iffd, &reply.prim, DL_INFO_ACK, sizeof(reply)) < 0) { 2258 close(iffd); 2259 return 0; 2260 } 2261 2262 adrlen = reply.prim.info_ack.dl_addr_length; 2263 adrp = (unsigned char *)&reply + reply.prim.info_ack.dl_addr_offset; 2264 2265#if DL_CURRENT_VERSION >= 2 2266 if (reply.prim.info_ack.dl_sap_length < 0) 2267 adrlen += reply.prim.info_ack.dl_sap_length; 2268 else 2269 adrp += reply.prim.info_ack.dl_sap_length; 2270#endif 2271 2272 hwaddr->sa_family = AF_UNSPEC; 2273 memcpy(hwaddr->sa_data, adrp, adrlen); 2274 2275 return 1; 2276} 2277/* 2278 * get_hw_addr - obtain the hardware address for a named interface. 2279 */ 2280static int 2281get_hw_addr(name, ina, hwaddr) 2282 char *name; 2283 u_int32_t ina; 2284 struct sockaddr *hwaddr; 2285{ 2286 /* New way - get the address by doing an arp request. */ 2287 int s; 2288 struct arpreq req; 2289 2290 s = socket(AF_INET, SOCK_DGRAM, 0); 2291 if (s < 0) 2292 return 0; 2293 memset(&req, 0, sizeof(req)); 2294 req.arp_pa.sa_family = AF_INET; 2295 INET_ADDR(req.arp_pa) = ina; 2296 if (ioctl(s, SIOCGARP, &req) < 0) { 2297 error("Couldn't get ARP entry for %s: %m", ip_ntoa(ina)); 2298 return 0; 2299 } 2300 *hwaddr = req.arp_ha; 2301 hwaddr->sa_family = AF_UNSPEC; 2302 2303 return 1; 2304} 2305 2306static int 2307dlpi_attach(fd, ppa) 2308 int fd, ppa; 2309{ 2310 dl_attach_req_t req; 2311 struct strbuf buf; 2312 2313 req.dl_primitive = DL_ATTACH_REQ; 2314 req.dl_ppa = ppa; 2315 buf.len = sizeof(req); 2316 buf.buf = (void *) &req; 2317 return putmsg(fd, &buf, NULL, RS_HIPRI); 2318} 2319 2320static int 2321dlpi_info_req(fd) 2322 int fd; 2323{ 2324 dl_info_req_t req; 2325 struct strbuf buf; 2326 2327 req.dl_primitive = DL_INFO_REQ; 2328 buf.len = sizeof(req); 2329 buf.buf = (void *) &req; 2330 return putmsg(fd, &buf, NULL, RS_HIPRI); 2331} 2332 2333static int 2334dlpi_get_reply(fd, reply, expected_prim, maxlen) 2335 union DL_primitives *reply; 2336 int fd, expected_prim, maxlen; 2337{ 2338 struct strbuf buf; 2339 int flags, n; 2340 struct pollfd pfd; 2341 2342 /* 2343 * Use poll to wait for a message with a timeout. 2344 */ 2345 pfd.fd = fd; 2346 pfd.events = POLLIN | POLLPRI; 2347 do { 2348 n = poll(&pfd, 1, 1000); 2349 } while (n == -1 && errno == EINTR); 2350 if (n <= 0) 2351 return -1; 2352 2353 /* 2354 * Get the reply. 2355 */ 2356 buf.maxlen = maxlen; 2357 buf.buf = (void *) reply; 2358 flags = 0; 2359 if (getmsg(fd, &buf, NULL, &flags) < 0) 2360 return -1; 2361 2362 if (buf.len < sizeof(ulong)) { 2363 if (debug) 2364 dbglog("dlpi response short (len=%d)\n", buf.len); 2365 return -1; 2366 } 2367 2368 if (reply->dl_primitive == expected_prim) 2369 return 0; 2370 2371 if (debug) { 2372 if (reply->dl_primitive == DL_ERROR_ACK) { 2373 dbglog("dlpi error %d (unix errno %d) for prim %x\n", 2374 reply->error_ack.dl_errno, reply->error_ack.dl_unix_errno, 2375 reply->error_ack.dl_error_primitive); 2376 } else { 2377 dbglog("dlpi unexpected response prim %x\n", 2378 reply->dl_primitive); 2379 } 2380 } 2381 2382 return -1; 2383} 2384 2385/* 2386 * Return user specified netmask, modified by any mask we might determine 2387 * for address `addr' (in network byte order). 2388 * Here we scan through the system's list of interfaces, looking for 2389 * any non-point-to-point interfaces which might appear to be on the same 2390 * network as `addr'. If we find any, we OR in their netmask to the 2391 * user-specified netmask. 2392 */ 2393u_int32_t 2394GetMask(addr) 2395 u_int32_t addr; 2396{ 2397 u_int32_t mask, nmask, ina; 2398 struct ifreq *ifr, *ifend, ifreq; 2399 int nif; 2400 struct ifconf ifc; 2401 2402 addr = ntohl(addr); 2403 if (IN_CLASSA(addr)) /* determine network mask for address class */ 2404 nmask = IN_CLASSA_NET; 2405 else if (IN_CLASSB(addr)) 2406 nmask = IN_CLASSB_NET; 2407 else 2408 nmask = IN_CLASSC_NET; 2409 /* class D nets are disallowed by bad_ip_adrs */ 2410 mask = netmask | htonl(nmask); 2411 2412 /* 2413 * Scan through the system's network interfaces. 2414 */ 2415#ifdef SIOCGIFNUM 2416 if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0) 2417#endif 2418 nif = MAX_IFS; 2419 ifc.ifc_len = nif * sizeof(struct ifreq); 2420 ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len); 2421 if (ifc.ifc_buf == 0) 2422 return mask; 2423 if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) { 2424 warn("Couldn't get system interface list: %m"); 2425 free(ifc.ifc_buf); 2426 return mask; 2427 } 2428 ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len); 2429 for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) { 2430 /* 2431 * Check the interface's internet address. 2432 */ 2433 if (ifr->ifr_addr.sa_family != AF_INET) 2434 continue; 2435 ina = INET_ADDR(ifr->ifr_addr); 2436 if ((ntohl(ina) & nmask) != (addr & nmask)) 2437 continue; 2438 /* 2439 * Check that the interface is up, and not point-to-point or loopback. 2440 */ 2441 strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name)); 2442 if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0) 2443 continue; 2444 if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK)) 2445 != IFF_UP) 2446 continue; 2447 /* 2448 * Get its netmask and OR it into our mask. 2449 */ 2450 if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0) 2451 continue; 2452 mask |= INET_ADDR(ifreq.ifr_addr); 2453 } 2454 2455 free(ifc.ifc_buf); 2456 return mask; 2457} 2458 2459/* 2460 * logwtmp - write an accounting record to the /var/adm/wtmp file. 2461 */ 2462void 2463logwtmp(line, name, host) 2464 const char *line, *name, *host; 2465{ 2466 static struct utmpx utmpx; 2467 2468 if (name[0] != 0) { 2469 /* logging in */ 2470 strncpy(utmpx.ut_user, name, sizeof(utmpx.ut_user)); 2471 strncpy(utmpx.ut_line, line, sizeof(utmpx.ut_line)); 2472 strncpy(utmpx.ut_host, host, sizeof(utmpx.ut_host)); 2473 if (*host != '\0') { 2474 utmpx.ut_syslen = strlen(host) + 1; 2475 if (utmpx.ut_syslen > sizeof(utmpx.ut_host)) 2476 utmpx.ut_syslen = sizeof(utmpx.ut_host); 2477 } 2478 utmpx.ut_pid = getpid(); 2479 utmpx.ut_type = USER_PROCESS; 2480 } else { 2481 utmpx.ut_type = DEAD_PROCESS; 2482 } 2483 gettimeofday(&utmpx.ut_tv, NULL); 2484 updwtmpx("/var/adm/wtmpx", &utmpx); 2485} 2486 2487/* 2488 * get_host_seed - return the serial number of this machine. 2489 */ 2490int 2491get_host_seed() 2492{ 2493 char buf[32]; 2494 2495 if (sysinfo(SI_HW_SERIAL, buf, sizeof(buf)) < 0) { 2496 error("sysinfo: %m"); 2497 return 0; 2498 } 2499 return (int) strtoul(buf, NULL, 16); 2500} 2501 2502static int 2503strioctl(fd, cmd, ptr, ilen, olen) 2504 int fd, cmd, ilen, olen; 2505 void *ptr; 2506{ 2507 struct strioctl str; 2508 2509 str.ic_cmd = cmd; 2510 str.ic_timout = 0; 2511 str.ic_len = ilen; 2512 str.ic_dp = ptr; 2513 if (ioctl(fd, I_STR, &str) == -1) 2514 return -1; 2515 if (str.ic_len != olen) 2516 dbglog("strioctl: expected %d bytes, got %d for cmd %x\n", 2517 olen, str.ic_len, cmd); 2518 return 0; 2519} 2520 2521#if 0 2522/* 2523 * lock - create a lock file for the named lock device 2524 */ 2525 2526#define LOCK_PREFIX "/var/spool/locks/LK." 2527static char lock_file[40]; /* name of lock file created */ 2528 2529int 2530lock(dev) 2531 char *dev; 2532{ 2533 int n, fd, pid; 2534 struct stat sbuf; 2535 char ascii_pid[12]; 2536 2537 if (stat(dev, &sbuf) < 0) { 2538 error("Can't get device number for %s: %m", dev); 2539 return -1; 2540 } 2541 if ((sbuf.st_mode & S_IFMT) != S_IFCHR) { 2542 error("Can't lock %s: not a character device", dev); 2543 return -1; 2544 } 2545 slprintf(lock_file, sizeof(lock_file), "%s%03d.%03d.%03d", 2546 LOCK_PREFIX, major(sbuf.st_dev), 2547 major(sbuf.st_rdev), minor(sbuf.st_rdev)); 2548 2549 while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) { 2550 if (errno == EEXIST 2551 && (fd = open(lock_file, O_RDONLY, 0)) >= 0) { 2552 /* Read the lock file to find out who has the device locked */ 2553 n = read(fd, ascii_pid, 11); 2554 if (n <= 0) { 2555 error("Can't read pid from lock file %s", lock_file); 2556 close(fd); 2557 } else { 2558 ascii_pid[n] = 0; 2559 pid = atoi(ascii_pid); 2560 if (pid > 0 && kill(pid, 0) == -1 && errno == ESRCH) { 2561 /* pid no longer exists - remove the lock file */ 2562 if (unlink(lock_file) == 0) { 2563 close(fd); 2564 notice("Removed stale lock on %s (pid %d)", 2565 dev, pid); 2566 continue; 2567 } else 2568 warn("Couldn't remove stale lock on %s", 2569 dev); 2570 } else 2571 notice("Device %s is locked by pid %d", 2572 dev, pid); 2573 } 2574 close(fd); 2575 } else 2576 error("Can't create lock file %s: %m", lock_file); 2577 lock_file[0] = 0; 2578 return -1; 2579 } 2580 2581 slprintf(ascii_pid, sizeof(ascii_pid), "%10d\n", getpid()); 2582 write(fd, ascii_pid, 11); 2583 2584 close(fd); 2585 return 1; 2586} 2587 2588/* 2589 * unlock - remove our lockfile 2590 */ 2591void 2592unlock() 2593{ 2594 if (lock_file[0]) { 2595 unlink(lock_file); 2596 lock_file[0] = 0; 2597 } 2598} 2599#endif 2600 2601/* 2602 * cifroute - delete a route through the addresses given. 2603 */ 2604int 2605cifroute(u, our, his) 2606 int u; 2607 u_int32_t our, his; 2608{ 2609 struct rtentry rt; 2610 2611 memset(&rt, 0, sizeof(rt)); 2612 rt.rt_dst.sa_family = AF_INET; 2613 INET_ADDR(rt.rt_dst) = his; 2614 rt.rt_gateway.sa_family = AF_INET; 2615 INET_ADDR(rt.rt_gateway) = our; 2616 rt.rt_flags = RTF_HOST; 2617 2618 if (ioctl(ipfd, SIOCDELRT, &rt) < 0) { 2619 error("Can't delete route: %m"); 2620 return 0; 2621 } 2622 2623 return 1; 2624} 2625 2626/* 2627 * have_route_to - determine if the system has a route to the specified 2628 * IP address. Returns 0 if not, 1 if so, -1 if we can't tell. 2629 * `addr' is in network byte order. 2630 * For demand mode to work properly, we have to ignore routes 2631 * through our own interface. 2632 */ 2633#ifndef T_CURRENT /* needed for Solaris 2.5 */ 2634#define T_CURRENT MI_T_CURRENT 2635#endif 2636 2637int 2638have_route_to(addr) 2639 u_int32_t addr; 2640{ 2641#ifdef SOL2 2642 int fd, r, flags, i; 2643 struct { 2644 struct T_optmgmt_req req; 2645 struct opthdr hdr; 2646 } req; 2647 union { 2648 struct T_optmgmt_ack ack; 2649 unsigned char space[64]; 2650 } ack; 2651 struct opthdr *rh; 2652 struct strbuf cbuf, dbuf; 2653 int nroutes; 2654 mib2_ipRouteEntry_t routes[8]; 2655 mib2_ipRouteEntry_t *rp; 2656 2657 fd = open(mux_dev_name, O_RDWR); 2658 if (fd < 0) { 2659 warn("have_route_to: couldn't open %s: %m", mux_dev_name); 2660 return -1; 2661 } 2662 2663 req.req.PRIM_type = T_OPTMGMT_REQ; 2664 req.req.OPT_offset = (char *) &req.hdr - (char *) &req; 2665 req.req.OPT_length = sizeof(req.hdr); 2666 req.req.MGMT_flags = T_CURRENT; 2667 2668 req.hdr.level = MIB2_IP; 2669 req.hdr.name = 0; 2670 req.hdr.len = 0; 2671 2672 cbuf.buf = (char *) &req; 2673 cbuf.len = sizeof(req); 2674 2675 if (putmsg(fd, &cbuf, NULL, 0) == -1) { 2676 warn("have_route_to: putmsg: %m"); 2677 close(fd); 2678 return -1; 2679 } 2680 2681 for (;;) { 2682 cbuf.buf = (char *) &ack; 2683 cbuf.maxlen = sizeof(ack); 2684 dbuf.buf = (char *) routes; 2685 dbuf.maxlen = sizeof(routes); 2686 flags = 0; 2687 r = getmsg(fd, &cbuf, &dbuf, &flags); 2688 if (r == -1) { 2689 warn("have_route_to: getmsg: %m"); 2690 close(fd); 2691 return -1; 2692 } 2693 2694 if (cbuf.len < sizeof(struct T_optmgmt_ack) 2695 || ack.ack.PRIM_type != T_OPTMGMT_ACK 2696 || ack.ack.MGMT_flags != T_SUCCESS 2697 || ack.ack.OPT_length < sizeof(struct opthdr)) { 2698 dbglog("have_route_to: bad message len=%d prim=%d", 2699 cbuf.len, ack.ack.PRIM_type); 2700 close(fd); 2701 return -1; 2702 } 2703 2704 rh = (struct opthdr *) ((char *)&ack + ack.ack.OPT_offset); 2705 if (rh->level == 0 && rh->name == 0) 2706 break; 2707 if (rh->level != MIB2_IP || rh->name != MIB2_IP_21) { 2708 while (r == MOREDATA) 2709 r = getmsg(fd, NULL, &dbuf, &flags); 2710 continue; 2711 } 2712 2713 for (;;) { 2714 nroutes = dbuf.len / sizeof(mib2_ipRouteEntry_t); 2715 for (rp = routes, i = 0; i < nroutes; ++i, ++rp) { 2716 if (rp->ipRouteMask != ~0) { 2717 dbglog("have_route_to: dest=%x gw=%x mask=%x\n", 2718 rp->ipRouteDest, rp->ipRouteNextHop, 2719 rp->ipRouteMask); 2720 if (((addr ^ rp->ipRouteDest) & rp->ipRouteMask) == 0 2721 && rp->ipRouteNextHop != remote_addr) 2722 return 1; 2723 } 2724 } 2725 if (r == 0) 2726 break; 2727 r = getmsg(fd, NULL, &dbuf, &flags); 2728 } 2729 } 2730 close(fd); 2731 return 0; 2732#else 2733 return -1; 2734#endif /* SOL2 */ 2735} 2736 2737/* 2738 * get_pty - get a pty master/slave pair and chown the slave side to 2739 * the uid given. Assumes slave_name points to MAXPATHLEN bytes of space. 2740 */ 2741int 2742get_pty(master_fdp, slave_fdp, slave_name, uid) 2743 int *master_fdp; 2744 int *slave_fdp; 2745 char *slave_name; 2746 int uid; 2747{ 2748 int mfd, sfd; 2749 char *pty_name; 2750 2751 mfd = open("/dev/ptmx", O_RDWR); 2752 if (mfd < 0) { 2753 error("Couldn't open pty master: %m"); 2754 return 0; 2755 } 2756 2757 pty_name = ptsname(mfd); 2758 if (pty_name == NULL) { 2759 error("Couldn't get name of pty slave"); 2760 close(mfd); 2761 return 0; 2762 } 2763 if (chown(pty_name, uid, -1) < 0) 2764 warn("Couldn't change owner of pty slave: %m"); 2765 if (chmod(pty_name, S_IRUSR | S_IWUSR) < 0) 2766 warn("Couldn't change permissions on pty slave: %m"); 2767 if (unlockpt(mfd) < 0) 2768 warn("Couldn't unlock pty slave: %m"); 2769 2770 sfd = open(pty_name, O_RDWR); 2771 if (sfd < 0) { 2772 error("Couldn't open pty slave %s: %m", pty_name); 2773 close(mfd); 2774 return 0; 2775 } 2776 if (ioctl(sfd, I_PUSH, "ptem") < 0) 2777 warn("Couldn't push ptem module on pty slave: %m"); 2778 2779 dbglog("Using %s", pty_name); 2780 strlcpy(slave_name, pty_name, MAXPATHLEN); 2781 *master_fdp = mfd; 2782 *slave_fdp = sfd; 2783 2784 return 1; 2785} 2786