| 23a596db1bbf4ad8d4cc297965d1744937586536 |
|
08-Apr-2016 |
Hao Wu <hao.a.wu@intel.com> |
MdeModulePkg Ata: Use the new (incompatible) PortMultiplierPort semantics
The Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
and Mantis ticket 1472 <https://mantis.uefi.org/mantis/view.php?id=1472>
updated the description of the port multiplier port number parameter in
SATA Device Path Node and ATA Pass-Through Protocol.
Now, this parameter should be set to 0xFFFF instead of 0 to indicate that
an ATA device is directly attached on the controller port.
Please note that this is an incompatible change. The consumer of SATA
device path or ATA_PASS_THRU needs to re-examine its usage to follow UEFI
2.5 mantis 1353 and 1472.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| ab82122dfebb90751b478b7c3cab9ed42051dbf4 |
|
15-May-2014 |
Tian, Feng <feng.tian@intel.com> |
MdeModulePkg/AtaAtapiPassThru: Handle timeout 0 as indefinitely wait to strictly comply with UEFI spec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian, Feng <feng.tian@intel.com>
Reviewed-by: Li, Elvin <elvin.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15534 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| 4b738c76f56f8eda171f14b8f9b20e34b66be476 |
|
22-Jan-2014 |
Tian, Hot <hot.tian@intel.com> |
Fix CRLF format
Signed-off-by: Tian, Hot <hot.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15155 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| 58727f29ea4da2618e18a0c0d5c819f29badaf26 |
|
16-Mar-2012 |
qianouyang <qianouyang@6f19259b-4bc3-4df7-8a09-765794883524> |
Introduce tow non-blocking task lists to AtaBus. One maintains the sub-task which is related to running Ata Task and the other is for waiting Ata Task. And it will not pass any task to AtaAtapiPassThru until the previous Ata task has been finished or met error.
Signed-off-by: qianouyang
Reviewed-by: czhang46 erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13105 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| 8536cc4b37e12d11af9432d6e73e3c8c84c68b79 |
|
03-Nov-2011 |
erictian <erictian@6f19259b-4bc3-4df7-8a09-765794883524> |
MdeModulePkg: ATA performance tuning.
1. Boost IDE mode boot when slave device is absent.
2. Use D2H FIS to check if the PIO OUT/DMA IN/DMA OUT transfer is finished or error happened. ATA PIO IN has special check as it may just receive PIO SETUP FIS for success case.
3. Add command status register check for IDE DMA transfer.
4. ScsiDiskReadCapacity() in ScsiDisk should return EFI_SUCCESS if SENSE Data request is success.
Signed-off-by: erictian
Reviewed-by: rsun3
Reviewed-by: xdu2
Reviewed-by: mdkinney
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12658 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| 284ee2e829ab2453293b7dc4539727ad6c047163 |
|
06-Jul-2011 |
niruiyu <niruiyu@6f19259b-4bc3-4df7-8a09-765794883524> |
Fix the comments to follow UEFI Spec regarding how to check an EFI_HANDLE is valid/invalid.
Signed-off-by: niruiyu
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11987 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| 86d8e1994269161ae77ab46383415a4f0338b8df |
|
19-May-2011 |
qianouyang <qianouyang@6f19259b-4bc3-4df7-8a09-765794883524> |
Update the function's descriptions (which is in AtaBus, AtaAtapiPassThru, Partition drivers) to make them be consistent with the code.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11678 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| 490b5ea10bcdab3579d4c12056b177cea52d6f8e |
|
03-May-2011 |
qianouyang <qianouyang@6f19259b-4bc3-4df7-8a09-765794883524> |
Add BlockIO2 Protocol.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11606 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| aca84419c4b5128b69215b8f6e4d34c36efb1fbc |
|
30-Sep-2010 |
erictian <erictian@6f19259b-4bc3-4df7-8a09-765794883524> |
remove additional space from comments and pass ICC/GCC44 build
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10903 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|
| a41b5272cdffba5fd9c4734d4c06c8682186d822 |
|
29-Sep-2010 |
erictian <erictian@6f19259b-4bc3-4df7-8a09-765794883524> |
add native ide/ahci driver
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10901 6f19259b-4bc3-4df7-8a09-765794883524
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h
|