| e27ccaba9050b11a10d82fd9a0dfdd87015bd710 |
|
30-Nov-2016 |
Feng Tian <feng.tian@intel.com> |
MdeModulePkg/SdMmcPciHcDxe: Replace deprecated debug level macros
EFI_D_INFO, EFI_D_VERBOSE, EFI_D_WARN and EFI_D_ERROR are replaced
with currently recommended values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
|
| 9252d67ab3007601ddf983d1278cbe0e4a647f34 |
|
22-Jun-2016 |
Joe Zhou <shjzhou@marvell.com> |
MdeModulePkg: SdMmc: Add delay before eMMC reset
This delay is necessary for eMMC reset to working properly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Joe Zhou <shjzhou@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
|
| 91ff0f05914a4ee153c0a6241a2f8e93f9316325 |
|
22-Jun-2016 |
Joe Zhou <shjzhou@marvell.com> |
MdeModulePkg: SdMmc: Fix parameters order in EmmcSwitch functions call
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Joe Zhou <shjzhou@marvell.com>
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
|
| 8c983d3e06da799e623a9f46fcaa207455482091 |
|
03-May-2016 |
Feng Tian <feng.tian@intel.com> |
MdeModulePkg/SdMmcPciHcDxe: Error handling enhance on tuning procedure
Enhance the code to reset tuning circuit when tuning error case happens.
Cc: Wu, Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
|
| 48555339beb65f90bd42995a15bd38cd45e378f5 |
|
23-Mar-2016 |
Feng Tian <feng.tian@intel.com> |
MdeModulePkg/SdMmc: Add EDKII SD/MMC stack
This stack includes:
1. Dxe phase support by:
1) SdMmcPciHcDxe driver to consume PciIo and produce
SdMmcPassThru.
2) SdDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2.
3) EmmcDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2/SSP.
2. Pei phase support
1) SdBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
2) EmmcBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
3) SdMmcPciHcPei driver to produce SdMmcHostController
Ppi.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
|