| 9839ecd75c832023d4d13fd2917a8c28261ff668 |
|
07-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950
4ec1fd8 FT: Differentiate between FT for station and for AP in build
f0259c3 hostapd: Fix own wide bandwidth subelement generation (neighbor report)
0a63635 AP: Use valid status code in wpa_ft_send_rrb_auth_resp()
e4b48b7 Extend ieee80211_freq_to_channel_ext() to cover channels 52-64
c433c50 wpa_supplicant: Make CONFIG_MBO independent of CONFIG_AP
d044d2f wpa_supplicant: Get scan_result IE also from Beacon frames
451a27b hostapd: Add a configuration to set an AP as stationary
5cb5937 hostapd: Clear location configuration when it is reset
f5ec346 hostapd: Fix adding neighbor entry
99b82bf mka: Implement reference counting on data_key
23c3528 mka: Add support for removing SAs
6b6175b mka: Sync structs definitions with IEEE Std 802.1X-2010
6f551ab mka: Remove "channel" hacks from the stack and the macsec_qca driver
7d8f795 Fix typo in DigestAlgorithn
f5c15dc Fix typo in eap_example_server.c
59d7cff AP: Disable VHT in TKIP-only configuration
847ee1a wpa_supplicant: Use correct interface type when creating P2P interface
78a3b23 P2P: Clear old P2PS provision data
f69939e P2P: Clear listen state during PD-in-FIND
4cc0f90 P2P: Clear P2PS provision state on P2P flush
a818425 hostapd: Added signal level to STA tracking
a1047f5 Remove duplicate dl_list_init() for global_ctrl_dst
3765c97 hostapd_cli: Remove duplicate const in hostapd_cli_cmd()
8c88922 TDLS: Fix checks on prohibit bits
c2ad5b9 nl80211: Update channel information after channel switch notification
913c3e1 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig
81a10a9 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y
ea06a08 HS 2.0 server: Remove redundant NULL check
5f99d96 Removed redundant NULL check for sta in hostapd_event_sta_low_ack()
230b2b2 Removed redundant NULL check for b in wpabuf_concat()
641c73f driver.h: Fix a typo in a comment
2e4e4fb nl80211: Allow TDLS trigger modes to be configured to the host driver
14cd203 QCA vendor command to configure the TDLS behavior in the host driver
a18563d Extend QCA vendor attribute link layer statistics attribute
95f3703 Add more QCA vendor attribute definitions into qca-vendor.h
87416ea QCA vendor attribute to report frame aggregation failure
befdb2d nl80211: Check driver FILS capability
40a4572 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
d8f9342 nl80211: Add support for setting FILS authentication algorithm
e76e950 Sync with mac80211-next.git include/uapi/linux/nl80211.h
2a0b86d Note set_key(WPA_ALG_NONE) failure in debug log
061dac1 FILS: Claim FILS capability only if driver supports it
ff338fa FILS: Setup EAPOL state machines properly after FILS association (AP)
da24c5a FILS: Set TK after association (AP)
07e0117 FILS: Mark connection fully authorized after FILS Association (AP)
706df42 FILS: Association Response processing (STA)
e73ffa0 FILS: Add Association Response frame elements and encrypt them (AP)
78815f3 FILS: Decrypt Association Request elements and check Key-Auth (AP)
86cd692 FILS: Add elements to FILS Association Request frame
ac56c39 driver: Add option to pass FILS KEK/AAD to the driver for association
783c292 P2P: Check if the pref_freq reported by the driver supports P2P
a660993 FILS: Authentication frame processing (STA)
c4fd6d8 FILS: Process FILS Authentication frame (AP)
ffb62f2 FILS: Add a helper function for status code conversion
c1bd4ba FILS: Extend wpa_auth_pmksa_get() to support PMKID matching
c30bd28 FILS: Export IEEE 802.1X helper functions
a6228b8 ERP: Update client identity based on EAP-Initiate/Re-auth
f00b9b8 FILS: Try to use FILS authentication if PMKSA or ERP entry is available
2c2c557 SME: Clear possibly used WPA/RSN IE for new connection
0866ed0 WPA: Add debug print for not-update-own-IEs case
14de9e3 FILS: Include wpa_insert_pmkid() in non-FT builds
de57d87 ERP: Make eap_peer_finish() callable
c28767e ERP: Make eap_peer_erp_reauth_start() available
5b092fb nl80211: Make full (Re)Association Response frame available
2aa1e48 FILS: Do not clear PTK on FILS Auth/Assoc (AP)
a852ab4 FILS: Key-Auth derivation function for FILS SK
c089bc5 FILS: PMK-to-PTK key derivation for FILS authentication
ce16c48 Rename sae_data to more generic auth_data
6eb1a56 Add QCA vendor command/attr for low level DMG(11ad) RF sector control
a2675b3 wpa_cli: Mark number of char *cmd constant
e097556 hostapd_cli: Mark number of char *cmd constant
c43cf33 wpa_cli: Add completion for ssid config commands
624259d wpa_cli: Add completion for sta, deauthenticate and disassociate
4c43f44 cli: Add list_sta command
85bab32 hostapd_cli: Process events received following control iface commands
e054a43 hostapd_cli: Refactor control iface reconnects with common helper
aa2ab91 hostapd_cli: Refresh stations list on control interface reconnect
839e4a8 hostapd_cli: Add completion for sta command
bc4b680 hostapd_cli: Enable command completion and history for Android
cf296a2 hostapd_cli: Add support for cli history file
c650f92 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig
5d30f92 wpa_supplicant: Restore permanent MAC address on reassociation
e3e2fe3 Always propagate scan results to all interfaces
33111c9 Check for NULL qsort() base pointers
4b5b8a5 WPS: Force BSSID for WPS provisioning step connection
bf07e05 ERP: Do not pass full EAP header to eap_peer_erp_reauth_start()
2449791 FILS: Update EAPOL-Key Descriptor Version RX rules (AP)
16eb485 FILS: Handle Group Key msg 1/2 without MIC when using AEAD cipher (STA)
75c8563 FILS: Perform AEAD processing after PTK has been confirmed
0ab1dd0 FILS: Use AEAD cipher to check received EAPOL-Key frames (STA)
b729fd8 FILS: Use AEAD cipher to protect EAPOL-Key frames (AP)
3b5b7aa FILS: Use AEAD cipher to check received EAPOL-Key frames (AP)
2022f1d FILS: Use AEAD cipher to protect EAPOL-Key frames (STA)
1049af7 RSN: Pass full PTK to wpa_eapol_key_send() instead of KCK only
b986648 FILS: Update EAPOL-Key RX rules for FILS (AP)
352caf0 FILS: Update EAPOL-Key descriptor version rules for RX (STA)
36a50fd FILS: Set EAPOL-Key Key Descriptor Version to 0 with FILS AKMs (AP)
4a26ccd FILS: Set EAPOL-Key Key Info MIC=0 when using AEAD cipher (supplicant)
f5ff8ae FILS: Do not add Key MIC field in supplicant when using AEAD cipher
dc5bad4 RSN authenticator: Add more debug print details on EAPOL-Key RX
555ff85 wlantest: Recognize EAPOL-Key frames without MIC bit for FILS
6d014ff Make struct wpa_eapol_key easier to use with variable length MIC
94f66e8 FILS: Advertise ERP domain in FILS Indication element
c30ed45 FILS: Allow hostapd to select FILS AKM for connection
b8ae56e FILS: Allow wpa_supplicant to select FILS AKM for connection
7147a83 FILS: Add FILS flags into wpa_supplicant BSS command output
379e2b4 FILS: Add 'GET_CAPABILITY fils' for runtime check
e4d2ce1 FILS: Set FILS Capability bit in management frames from station
f55acd9 FILS: Set FILS Capability bit in management frames from AP
198a942 FILS: Add FILS Indication element to Beacon and Probe Response frames
9b7a2b8 FILS: Add wpa_supplicant configuration options
903ecbe FILS: Add hostapd configuration options
274d8b7 FILS: Add definitions for new frames and values
94318a0 FILS: Add AKM definitions
1d29163 FILS: Add new information elements
325a85b Extend AES-SIV implementation to support different key lengths
e2991ee Move CRC-32 routine from wlantest to src/utils
150948e test: FT: EAP test for mismatching keys
d0175d6 test: FT with locally generated PMK-R0/PMK-R1 from PSK
9659056 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally
a25e4ef mka: Add driver op to get macsec capabilities
53b2555 EAP-pwd: Validate Prep field in EAP-pwd-ID/Response
2875e32 EAP-pwd: Fix Prep in EAP-pwd-ID/Response when EAP_PWD_PREP_MS is used
5f5ca28 mka: Pass full structures down to macsec drivers' receive SC ops
8ebfc7c mka: Pass full structures down to macsec drivers' transmit SC ops
b70d508 LibreSSL: Fix compatibility for EAP-FAST
df42673 LibreSSL: Fix TLS initialization/deinitialization
0d42179 LibreSSL: Fix dh5 code
32d08d5 Add QCA vendor attributes for measurement frequency for FTM/AOA
cecdecd mka: Pass full structures down to macsec drivers' receive SA ops
909c1b9 mka: Pass full structures down to macsec drivers' transmit SA ops
7fa5eff mka: Pass full structures down to macsec drivers' packet number ops
f75f6e2 mka: Move structs {transmit,receive}_{sa,sc} to a common header
9d3f4a7 autoscan: Add more debug prints for cases where autoscan is not used
98529f3 The master branch is now used for v2.7 development
2462f34 Change version number to v2.6 for the release
5ac8f86 Fix PNO restart flow
14f34a7 Continue scanning if sched_scan stops unexpectedly
1ac3886 Remove disconnected APs from BSS table if likely out-of-range
ebf59eb Restart PNO/sched_scan on channel list update
746e5c2 Fix spelling mistakes in number of comments
8b66888 Add explicit enum values for QCA vendor config attributes
8f47917 MBO: Add support to send ANQP request to get cellular preference
Test: Wifi Test Suite: b/32709661
Change-Id: I249f5fec85ad69ce3879247b07f0db84136ab996
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/neighbor_db.h
|
| fe31a9a8fff325bfddbf06fc3e9edaf480824bee |
|
09-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Revert "Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950"
This reverts commit 78a5dac804c22aa6e4ec8226a864d3b0d6ccddbb.
Test: None
/external/wpa_supplicant_8/src/ap/neighbor_db.h
|
| 78a5dac804c22aa6e4ec8226a864d3b0d6ccddbb |
|
07-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950
4ec1fd8 FT: Differentiate between FT for station and for AP in build
f0259c3 hostapd: Fix own wide bandwidth subelement generation (neighbor report)
0a63635 AP: Use valid status code in wpa_ft_send_rrb_auth_resp()
e4b48b7 Extend ieee80211_freq_to_channel_ext() to cover channels 52-64
c433c50 wpa_supplicant: Make CONFIG_MBO independent of CONFIG_AP
d044d2f wpa_supplicant: Get scan_result IE also from Beacon frames
451a27b hostapd: Add a configuration to set an AP as stationary
5cb5937 hostapd: Clear location configuration when it is reset
f5ec346 hostapd: Fix adding neighbor entry
99b82bf mka: Implement reference counting on data_key
23c3528 mka: Add support for removing SAs
6b6175b mka: Sync structs definitions with IEEE Std 802.1X-2010
6f551ab mka: Remove "channel" hacks from the stack and the macsec_qca driver
7d8f795 Fix typo in DigestAlgorithn
f5c15dc Fix typo in eap_example_server.c
59d7cff AP: Disable VHT in TKIP-only configuration
847ee1a wpa_supplicant: Use correct interface type when creating P2P interface
78a3b23 P2P: Clear old P2PS provision data
f69939e P2P: Clear listen state during PD-in-FIND
4cc0f90 P2P: Clear P2PS provision state on P2P flush
a818425 hostapd: Added signal level to STA tracking
a1047f5 Remove duplicate dl_list_init() for global_ctrl_dst
3765c97 hostapd_cli: Remove duplicate const in hostapd_cli_cmd()
8c88922 TDLS: Fix checks on prohibit bits
c2ad5b9 nl80211: Update channel information after channel switch notification
913c3e1 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig
81a10a9 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y
ea06a08 HS 2.0 server: Remove redundant NULL check
5f99d96 Removed redundant NULL check for sta in hostapd_event_sta_low_ack()
230b2b2 Removed redundant NULL check for b in wpabuf_concat()
641c73f driver.h: Fix a typo in a comment
2e4e4fb nl80211: Allow TDLS trigger modes to be configured to the host driver
14cd203 QCA vendor command to configure the TDLS behavior in the host driver
a18563d Extend QCA vendor attribute link layer statistics attribute
95f3703 Add more QCA vendor attribute definitions into qca-vendor.h
87416ea QCA vendor attribute to report frame aggregation failure
befdb2d nl80211: Check driver FILS capability
40a4572 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
d8f9342 nl80211: Add support for setting FILS authentication algorithm
e76e950 Sync with mac80211-next.git include/uapi/linux/nl80211.h
2a0b86d Note set_key(WPA_ALG_NONE) failure in debug log
061dac1 FILS: Claim FILS capability only if driver supports it
ff338fa FILS: Setup EAPOL state machines properly after FILS association (AP)
da24c5a FILS: Set TK after association (AP)
07e0117 FILS: Mark connection fully authorized after FILS Association (AP)
706df42 FILS: Association Response processing (STA)
e73ffa0 FILS: Add Association Response frame elements and encrypt them (AP)
78815f3 FILS: Decrypt Association Request elements and check Key-Auth (AP)
86cd692 FILS: Add elements to FILS Association Request frame
ac56c39 driver: Add option to pass FILS KEK/AAD to the driver for association
783c292 P2P: Check if the pref_freq reported by the driver supports P2P
a660993 FILS: Authentication frame processing (STA)
c4fd6d8 FILS: Process FILS Authentication frame (AP)
ffb62f2 FILS: Add a helper function for status code conversion
c1bd4ba FILS: Extend wpa_auth_pmksa_get() to support PMKID matching
c30bd28 FILS: Export IEEE 802.1X helper functions
a6228b8 ERP: Update client identity based on EAP-Initiate/Re-auth
f00b9b8 FILS: Try to use FILS authentication if PMKSA or ERP entry is available
2c2c557 SME: Clear possibly used WPA/RSN IE for new connection
0866ed0 WPA: Add debug print for not-update-own-IEs case
14de9e3 FILS: Include wpa_insert_pmkid() in non-FT builds
de57d87 ERP: Make eap_peer_finish() callable
c28767e ERP: Make eap_peer_erp_reauth_start() available
5b092fb nl80211: Make full (Re)Association Response frame available
2aa1e48 FILS: Do not clear PTK on FILS Auth/Assoc (AP)
a852ab4 FILS: Key-Auth derivation function for FILS SK
c089bc5 FILS: PMK-to-PTK key derivation for FILS authentication
ce16c48 Rename sae_data to more generic auth_data
6eb1a56 Add QCA vendor command/attr for low level DMG(11ad) RF sector control
a2675b3 wpa_cli: Mark number of char *cmd constant
e097556 hostapd_cli: Mark number of char *cmd constant
c43cf33 wpa_cli: Add completion for ssid config commands
624259d wpa_cli: Add completion for sta, deauthenticate and disassociate
4c43f44 cli: Add list_sta command
85bab32 hostapd_cli: Process events received following control iface commands
e054a43 hostapd_cli: Refactor control iface reconnects with common helper
aa2ab91 hostapd_cli: Refresh stations list on control interface reconnect
839e4a8 hostapd_cli: Add completion for sta command
bc4b680 hostapd_cli: Enable command completion and history for Android
cf296a2 hostapd_cli: Add support for cli history file
c650f92 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig
5d30f92 wpa_supplicant: Restore permanent MAC address on reassociation
e3e2fe3 Always propagate scan results to all interfaces
33111c9 Check for NULL qsort() base pointers
4b5b8a5 WPS: Force BSSID for WPS provisioning step connection
bf07e05 ERP: Do not pass full EAP header to eap_peer_erp_reauth_start()
2449791 FILS: Update EAPOL-Key Descriptor Version RX rules (AP)
16eb485 FILS: Handle Group Key msg 1/2 without MIC when using AEAD cipher (STA)
75c8563 FILS: Perform AEAD processing after PTK has been confirmed
0ab1dd0 FILS: Use AEAD cipher to check received EAPOL-Key frames (STA)
b729fd8 FILS: Use AEAD cipher to protect EAPOL-Key frames (AP)
3b5b7aa FILS: Use AEAD cipher to check received EAPOL-Key frames (AP)
2022f1d FILS: Use AEAD cipher to protect EAPOL-Key frames (STA)
1049af7 RSN: Pass full PTK to wpa_eapol_key_send() instead of KCK only
b986648 FILS: Update EAPOL-Key RX rules for FILS (AP)
352caf0 FILS: Update EAPOL-Key descriptor version rules for RX (STA)
36a50fd FILS: Set EAPOL-Key Key Descriptor Version to 0 with FILS AKMs (AP)
4a26ccd FILS: Set EAPOL-Key Key Info MIC=0 when using AEAD cipher (supplicant)
f5ff8ae FILS: Do not add Key MIC field in supplicant when using AEAD cipher
dc5bad4 RSN authenticator: Add more debug print details on EAPOL-Key RX
555ff85 wlantest: Recognize EAPOL-Key frames without MIC bit for FILS
6d014ff Make struct wpa_eapol_key easier to use with variable length MIC
94f66e8 FILS: Advertise ERP domain in FILS Indication element
c30ed45 FILS: Allow hostapd to select FILS AKM for connection
b8ae56e FILS: Allow wpa_supplicant to select FILS AKM for connection
7147a83 FILS: Add FILS flags into wpa_supplicant BSS command output
379e2b4 FILS: Add 'GET_CAPABILITY fils' for runtime check
e4d2ce1 FILS: Set FILS Capability bit in management frames from station
f55acd9 FILS: Set FILS Capability bit in management frames from AP
198a942 FILS: Add FILS Indication element to Beacon and Probe Response frames
9b7a2b8 FILS: Add wpa_supplicant configuration options
903ecbe FILS: Add hostapd configuration options
274d8b7 FILS: Add definitions for new frames and values
94318a0 FILS: Add AKM definitions
1d29163 FILS: Add new information elements
325a85b Extend AES-SIV implementation to support different key lengths
e2991ee Move CRC-32 routine from wlantest to src/utils
150948e test: FT: EAP test for mismatching keys
d0175d6 test: FT with locally generated PMK-R0/PMK-R1 from PSK
9659056 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally
a25e4ef mka: Add driver op to get macsec capabilities
53b2555 EAP-pwd: Validate Prep field in EAP-pwd-ID/Response
2875e32 EAP-pwd: Fix Prep in EAP-pwd-ID/Response when EAP_PWD_PREP_MS is used
5f5ca28 mka: Pass full structures down to macsec drivers' receive SC ops
8ebfc7c mka: Pass full structures down to macsec drivers' transmit SC ops
b70d508 LibreSSL: Fix compatibility for EAP-FAST
df42673 LibreSSL: Fix TLS initialization/deinitialization
0d42179 LibreSSL: Fix dh5 code
32d08d5 Add QCA vendor attributes for measurement frequency for FTM/AOA
cecdecd mka: Pass full structures down to macsec drivers' receive SA ops
909c1b9 mka: Pass full structures down to macsec drivers' transmit SA ops
7fa5eff mka: Pass full structures down to macsec drivers' packet number ops
f75f6e2 mka: Move structs {transmit,receive}_{sa,sc} to a common header
9d3f4a7 autoscan: Add more debug prints for cases where autoscan is not used
98529f3 The master branch is now used for v2.7 development
2462f34 Change version number to v2.6 for the release
5ac8f86 Fix PNO restart flow
14f34a7 Continue scanning if sched_scan stops unexpectedly
1ac3886 Remove disconnected APs from BSS table if likely out-of-range
ebf59eb Restart PNO/sched_scan on channel list update
746e5c2 Fix spelling mistakes in number of comments
8b66888 Add explicit enum values for QCA vendor config attributes
8f47917 MBO: Add support to send ANQP request to get cellular preference
Test: Wifi Test Suite: b/32709661
Change-Id: If11d88f812812543dab6839879e815892a39f963
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/neighbor_db.h
|
| 849734c8d1847920ed7042463f7480b1e0c1dfea |
|
27-May-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 8960afa4bfa423774a8ca58cc21a4a7c1ab6089e
8960afa wpa_cli: Run action file in case of an AP event
1cece2f OpenSSL: Comment out tls_connection_get_eap_fast_key without EAP-FAST
7358170 TLS: Split tls_connection_prf() into two functions
f150db6 OpenSSL: Remove two more accesses of ssl_ctx->cert_store
6dc3206 scan: Fix a memory leak on an error path
9ce3e61 nl80211: Add TEST_FAIL() to nl80211_set_mac_addr()
8880240 scan: Clean up code a bit - phase1 is used in all WPS cases
e1ae287 scan: Clean up code a bit - ssid cannot be NULL here
a170394 Update ChangeLog files for v2.6
a26c9c2 Fix sending non-Public Action frames over P2P Device interface
4d916ed nl80211: Register for only for specific Action frames in AP mode
31d7fb1 P2PS: Allow P2P_CONNECT command for P2PS connection with/without PIN
467fc14 P2PS: Correct config_methods for different P2P cases
9d136b0 EAP-SAKE: Do not debug print result if eap_sake_compute_mic() fails
0884633 EAP-PAX: Do not debug print result if eap_pax_mac() fails
92abe37 EAP-FAST: Check sha1_t_prf() result in eap_fast_get_cmk()
636a238 WPS: Check sha256_vector() result in wps_build_oob_dev_pw()
2c3d95c Check md5_vector() result in decrypt_ms_key()
38eee0f Check hmac_md5() result in radius_msg_verify_msg_auth()
05dad94 Check md5_vector() result in radius_msg_verify()
aae125e WPS: Fix debug prints in wps_derive_psk() error case
7d1007a Fix external radio work debug printing on removal
b6317b4 wpa_supplicant: Add wps_disabled parameter to network block
23d71a0 Set wpa_psk_set in wpa_supplicant AP mode is PSK is available
6641954 Fix AP mode key_mgmt configuration in wpa_supplicant default case
ad6cee3 P2P: Do not enable P2P group processing for non-P2P AP mode
a185e9b tests/remote: Add hwsim wrapper
ff9bb8a tests/remote: Add test_example.py
a73fa13 tests/remote: Add utils file
ede4719 tests/remote: Add monitor.py
3b11ad3 Send CTRL-EVENT-REGDOM-CHANGE event on the parent interface
4de70e2 Add MGMT_RX_PROCESS test command for wpa_supplicant
f42c3ce mesh: Calculate MTK before sending it to MAC in case Open is dropped
baa1213 mesh: Add missing action to cancel timer
e8a1b6b D-Bus: Check driver capability for IBSS in Modes property of Capabilities
7a1887f wpa_cli: Add backspace key process for some terminal
3dd0e9e wpa_supplicant: Fix CONFIG_AP build without CTRL_IFACE
d58b60d drivers: Add NEED_RADIOTAP
6a9681e OpenSSL: Make dh5_init() match the generic implementation
46bac65 WPS: Fix segmentation fault in new DH key derivation
e447133 OpenSSL: BoringSSL has SSL_get_client_random(), etc.
03626e9 Skip connection attempt for non-RSN networks if PMF is set to required
2295004 Ignore pmf=1/2 parameter for non-RSN networks
2a3f565 Reject SET commands with newline characters in the string values
b166cd8 Reject SET_CRED commands with newline characters in the string values
0fe5a23 Remove newlines from wpa_supplicant config network output
73e4abb Reject psk parameter set with invalid passphrase character
ecbb0b3 WPS: Reject a Credential with invalid passphrase
f4830be nl80211: Try running without mgmt frame subscription (driver AP SME)
df5bde8 Android: Remove EAP-FAST option
60d9f67 WPS: Explicitly clear wpabuf memory with key information
9b377be P2P: Copy config from p2pdev when not using dedicated group interface
3c88d26 P2P: Fix wpas_p2p_nfc_auth_join()
2f19563 WNM: Fetch scan results before checking transition candidates
4ac3398 Use a shared helper function for parsing hostapd.conf IEs
a911227 Add assocresp_elements parameter for hostapd
49fe2ad OpenSSL: Support OpenSSL 1.1.0 DH opacity
b92d2a5 FT: Fix RRB for FT over-the-air case
9e5a5de systemd: Update service files according to D-Bus interface version
ac7aea8 Assign QCA vendor command/attributes for set/get wifi configuration
57b3888 P2P: Add P2P_GROUP_MEMBER command to fetch client interface address
0ee8925 P2P: Trigger event when invitation is accepted
bd86ea0 nl80211: Get rid of unused assignment warning
18ae3a6 bsd: Set level correctly for non FreeBSD systems
cf667c6 RRM: Modify the processing of a received neighbor report
00ed0aa SME: Add support for global RRM flag
b5d172e nl80211: Add support for global RRM flag
a7f0bb7 driver: Add global RRM support flag
864b952 nl80211: Register to receive Radio Measurement Request frames
4a74201 wpa_supplicant: Handle LCI request
220754c hostapd: Add FTM range request
f4f185a hostapd: Add LCI request
629e180 hostapd: Save RM enabled capability of station
2572df3 hostapd: Handle Neighbor Report Request frame
061269b hostapd: Add own neighbor report data to neighbor database
9b4b226 hostapd: Add a database of neighboring APs
0101821 hostapd: Extend the configuration of RRM capabilities
6a4f0ed Fix spelling of "neighbor" in a function name
d41a535 wpa_supplicant: Add LCI and civic request to Neighbor Report Request
624b8a0 utils: Add ssid_parse() function
e4fbc8d Add measurement and neighbor report definitions
9d955f7 utils: Rename hostapd_parse_bin to wpabuf_parse_bin and move it
74e982d hostapd: Set LCI and Location Civic information in configuration
1854eec Add POLL_STA command to check connectivity in AP mode
3dbfb28 Allow AP to disconnect STA without sending Deauth/Disassoc frame
de92314 Add inactive_msec into STA output
61c1011 Extend VENDOR_ELEM parameters to cover non-P2P Probe Request frame
6922d44 nl80211: Implement configure_data_frame_filters() callback
ece4ac5 HS 2.0: Add support for configuring frame filters
e42adb9 driver: Add a packet filtering function declaration
ae33239 AP: Pass station P2P PS capabilities info during station add/set
7405bb0 Sync with mac80211-next.git include/uapi/linux/nl80211.h
90f1496 wpa_supplicant: "don't care" value for pbss in ssid structure
e52a698 RADIUS: Fix a possible memory leak on an error path
f1863f2 RADIUS: Fix possible memory leak when parsing per-STA passphrase
3433721 P2P: Continue p2p_find after sending non-success Invitation Response
0f34665 Mark wpa_supplicant_{start,stop}_sched_scan() static
Also reverting:
c7f648c wpa_supplicant_8: Add a temporary hack to work around BoringSSL incompatibility
1e1c48d2 Update AP IE regardless WPA_DRIVER_FLAGS_BSS_SELECTION flag
Change-Id: Idb9bfa80e9d9a4d10323dab5ce2bb24f4baf550c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/ap/neighbor_db.h
|