History log of /external/wpa_supplicant_8/hostapd/src/tls/libtommath.c
Revision Date Author Comments (<<< Hide modified files) (Show modified files >>>)
293335998d38c497293b1c41f7ad8342b507d458 09-Jan-2017 Dmitry Shmidt <dimitrysh@google.com> Cumulative patch from commit 05e5e615e6a26d7a9f5bd0569a0baeae1bcdee49

05e5e615e AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad
0c4b9025c AP: Do not look for supported rates in DMG/IEEE 802.11ad
e72faadb4 bgscan_simple: Fix short_scan_count comparison
517b5f928 nl80211: Zero num_modes if nl80211_get_hw_feature_data() fails
39c5da328 nl80211: Use correct attribute for scan flags in vendor scan
c167662d7 eap_proxy: On SIM error flush PMKSAs only for SIM/AKA/AKA' networks
6657bb158 Fix OOM handling in neighbor report response handling
7187e2093 Allow LCI request with no subelements
d73420143 RRM: Enable beacon report with active/passive scan for all drivers
ec45927b8 Report received beacon report with BEACON-RESP-RX event
f3383366a Report beacon request TX status as control interface event
90d9d7c32 Beacon request through hostapd control interface
73a27a634 Add hostapd configuration parameter rrm_beacon_report
de6ec8b55 Enable Beacon Report using beacon table for all drivers
6774c6a9f Update copyright notices for the new year 2017
f56877414 Do not add own BSS in neighbor report with invalid op_class/channel
aeff0645d FILS: Fix FILS Realm Information ANQP-element construction
76196ddb2 wpa_supplicant: Add support for Beacon Report Radio Measurement
b3060bf99 common: Add helper function to convert RSSI to RCPI
1ac4dba31 wpa_supplicant: Extend verify_channel() and make it global
c9ff8e5f6 common: Add function to get an operating class by its number and country
e4f1d879c common: Add non-global to global operating classes conversion
96a5f14ee nl80211: Add support for additional scan parameters for beacon report
c16b9f8d3 driver: Add scan support to beacon report
3c716fdbd wpa_supplicant: Refactor wpas_rrm_build_lci_report()
e1b96e112 wpa_supplicant: Send rejection for unsupported radio measurements
0c73e410d wpa_supplicant: Limit RRM response size to MMPDU size
9664ab8b7 wpa_supplicant: Refactor Radio Measurement Request handling
332bf5d3f wpa_supplicant: Validate RRM request frame format
ec493469f wpa_supplicant: Move RRM implementation to a dedicated file
d1c74f8c9 Add RRM definitions for beacon report measurement
6a31440b8 Fix LCI request subelement processing
ce691a8d9 Add CONFIG_MESH into wpa_supplicant defconfig
67129ab9e wpa_cli: Add commands to use PMKSA_GET/ADD
bbad185c1 P2P: Fix compilation warning in p2p_add_device()
2977f5193 GAS: Remove unnecessarily duplicate gas_frag_limit configuration
1940559ea FT: Drop FT Action frames if ft_over_ds=0
d8de90487 Remove deprecated tx_queue_* params from hostapd.conf notes
78022c836 Fix memory leak on hostapd eap_user_file parsing error paths
02f999c6d hostapd: Remove unnecessary NULL check from parser functions
fd5f29e7e Fix memory leak in hostapd BSS_TM_REQ error path handling
95de34a10 Remove trailing whitespace
45997cce4 hostapd: Add TERMINATE as per-interface command
546680f81 hostapd: Do not update dtim_period with invalid value
356773058 RADIUS server: Increase maximum number of sessions
a5861afcb hostapd: Do not update invalid wep_key_len_unicast
f78402ace hostapd: Do not update rejected wep_key_len_broadcast
e0ba7efe5 hostapd: Do not update eapol_version with rejected value
9266d00bf hostapd: Reject invalid macaddr_acl value
8628555f9 hostapd: Check driver parameter before replacing previous value
1dfd25a68 Fix hostapd SIGHUP processing before interface is enabled
34e29dfd4 Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call
65dfa8728 mka: Make MKA actor priority configurable
9bcfd5be8 Document new D-Bus WPS properties
77fcbf7ff D-Bus: Use a helper function to get possibly NULL strings
dbf524946 D-Bus: Add DeviceType in WPS property
266097fda D-Bus: Add device serial number in WPS property
3ee6a3ab3 D-Bus: Add model number in WPS property
ae66822cd D-Bus: Add WPS model name as property
318d4b5be D-Bus: Add WPS manufacturer as property
b20f031c6 D-Bus: Add WPS device name as property
4a45dc192 mesh: Show [MESH] flag in print_bss_info()
c04a67deb hostapd_cli: Add completion for get command
bf4167b9d hostapd_cli: Add completion for set command
86adff09e hostapd_cli: Completion for further commands with STA parameter
4f59ad069 hostapd_cli: Use common completion for commands that use stations
62b95eb67 hostapd_cli: Add missing command help descriptions
04f02faac Fix wpa_cipher_to_alg() return type
9187b13ad wpa_supplicant: Add BSS CURRENT control interface command
d7f12e4eb OpenSSL: Make sure local certificate auto chaining is enabled
4be02b71b OpenSSL: Remove SSL_{CTX_,}_clear_options ifdefs
7655bd738 P2P: Do not use wait_time for SD Response TX without fragmentation
1f0fdaf0e Fix race condition between AssocResp callback and 4addr event
a6f3761f7 eap_proxy: Add support for SIM state change indication from eap_proxy
79a54ab9f eap_proxy: Fix eap_proxy_init() prototype to use const eapol_cb
4e118c847 D-Bus: Add 'freq' option to P2P Find method to specify starting channel
e414f4f02 PeerKey: Fix STK 4-way handshake regression
28fb9bb19 PeerKey: Fix EAPOL-Key processing
dfc773172 Android: Add p2p_add_cli_chan=1 option
7508c2ad9 PAE: Make KaY specific details available via control interface
b54f43390 FILS: Make FILS Indication element information available in BSS output
8183aee6c FILS: Add support for building FILS Realm Information ANQP-element
9cad61867 FILS: Add Realm Information ANQP-element in BSS data
26bf70e3d FILS: Separate FILS realm configuration from ERP domain
42b847ac1 FILS: Fix hashed realm name derivation
29062f293 Update various definitions based on IEEE Std 802.11-2016
aaa9c60bc Fix preauth_test build by updating add_pmkid/remove_pmkid callbacks
0babae87a Fix wpa_supplicant build error with IEEE8021X_EAPOL unset
19810d29b Make Beacon IEs available in wpa_supplicant BSS command
274e76f22 mesh: Fix channel configuration in pri/sec switch case
cebda0e3e Make debug print clearer for AP/mesh mode secondary channel issues
3459381dd External persistent storage for PMKSA cache entries
c57931273 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant
655dc4a43 Send "TERMINATING" event from hostapd
5149a0f04 P2P: Set p2p_persistent_group=1 at the time of reading disabled=2
065c029a5 Remove MBO dependency from Supported Operating Classes element
62cd9d792 nl80211: Specify the BSSID in the QCA vendor scan
444930e5b Define an attribute to do a specific BSSID QCA vendor scan
cea761472 Add QCA vendor command definitions for IDs 61-73
cb0cc6efa Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands
c313c8a5d Fix QCA vendor command values for SAR power limits
a5c723adc Interworking: Clear SCANNING state if no network selected
a1836de64 SME: Fix IBSS setup after shared key/FT/FILS association
f49c852b5 P2P: Fix a theoretical out of bounds read in wpas_p2p_select_go_freq()
944d48588 P2P: Fix a theoretical out of bounds read in wpas_p2p_setup_freqs()
0a6c9dc70 P2P: Send P2P-DEVICE-FOUND event on peer changing device name
9a431d493 WFD: Clear wfd_subelems when P2P peer stops sending them
6e374bd44 Ignore scan results from ongoing scan when FLUSH command is issued
71ac93453 Make update_idx available in BSS control interface command
49aa88bb5 P2P: Clear PEER_WAITING_RESPONSE on GO Negotiation success
c79238b6a Define a QCA vendor command to configure SAR Power limits
0f5eb69f8 Use eloop timeout for post-EAP-Failure wait before disconnection
20b1a9e23 Allow hostapd wep_key# parameters to be cleared
5ec3d510e wpa_passphrase: Reject invalid passphrase

Test: Wifi Suite

Change-Id: Ida52ca4e43bbc326a89d4c9848529df2d545b692
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/libtommath.c
4171258d30a612645aa061cede62233b5c58ca2a 29-Jun-2015 Dmitry Shmidt <dimitrysh@google.com> Cumulative patch from commit 8c43ef8449bd4d2d0983db394770bd73f572b12d

8c43ef8 P2PS: Fix attribute addition in p2p_buf_add_service_instance()
a9ea609 P2PS: Fix p2p_find last parameter handling
6c73149 AP: Increase maximum value accepted for cwmin/cwmax
575e4f5 SAE: Reject FFC commit-element with value p-1
a406244 P2PS: Do not reply to ProbeReq on another channel when starting Listen
0c2b3f6 SAE: Reject commit-scalar value 1
4f39908 Send CTRL-EVENT-NETWORK-NOT-FOUND if no suitable network was found
123df27 D-Bus: Fix typos in debug print
ded14ce Android: Fix nl80211 build if BOARD_*_PRIVATE_LIB is unspecified
a140721 Android: Rename ANDROID_P2P_STUB to ANDROID_LIB_STUB
2ba4de3 D-Bus: Add documentation for wpas_dbus_signal_peer_groups_changed()
e48b5e2 D-Bus: Fix typo in dbus signal function documentation
09d5048 D-Bus: Add function documentation for wpas_dbus_unregister_interface()
adfbbd2 D-Bus: Add function documentation for wpas_dbus_register_interface()
c5967f0 D-Bus: Fix wpas_dbus_signal_p2p_invitation_result() documentation
4457f41 radius: Fix NULL dereference issue on allocation failure
f826fb1 OpenSSL: Handle EC_POINT_is_on_curve() error case
bbb5008 SAE: Use random "password" in extra hunting-and-pecking loops
eb5fee0 SAE: Add side-channel protection to PWE derivation with ECC
16841ab crypto: Add functions for computing the Legendre symbol and EC y^2
c4a13b4 OpenSSL: Add support for Brainpool Elliptic Curves
4584b66 SAE: Increase security parameter k to 40 based on Dragonfly recommendation
fdd731b SAE: Fix PWE generation to use minimum loop count (k) properly
8ec3332 SAE: Merge sae_derive_commit() error case return statements
d93abd4 SAE: Merge sae_get_rand() error case return statements
6a58444 SAE: Verify that own/peer commit-scalar and COMMIT-ELEMENT are different
4e7e688 Add crypto_ec_point_cmp()
8e2a3a4 dbus: Do not initialize variable twice
c1a14ef Do not check unsigned size is less than zero
fdc5608 OpenSSL: Remove SSL_CTX_{get,set}_app_data() compatibility wrapper
ba54933 libtommath: Fix mp_init_multi() stdarg use on error path
f6332b0 wpa_gui: Initialize WpaGuiApp::w in the constructor
f6df3f3 Use os_* wrapper more consistently
91b7a5e Use unsigned/signed printf format more consistently
59bae74 HS 2.0R2: Fix memory leak on error path in hs20-osu-client
c5ca73d P2P: Use offsetof() instead of local implementation
c3c5b5f ERP server: Make erp_send_finish_reauth() easier for static analyzers
6ce1bea bsd: Remove redundant NULL check in bsd_init()
c99df20 Remove redundant NULL check in ieee802_1x_encapsulate_radius()
2eb5967 AP: Add more 2.4 GHz channels for 20/40 MHz HT co-ex scan
5ed6519 hw_features: Merge similar return cases
4e37dd6 SAE: Simplify sae_prepare_commit() error path
04e6c4c Fix SAE group selection in an error case
3dce85c HS 2.0: Add WLAN RADIUS attributes in OSEN case
efd5d26 Remove unnecessary wpa_ie_len check from wpa_parse_wpa_ie_wpa()
ce8963f Remove WEP40/WEP104 cipher suite support for WPA/WPA2
ee140ef FT: Stop association attempt if Auth response processing fails (SME)
1887be4 Make check_20mhz_bss() static

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

Bug: 22062116
Change-Id: Ie1d175f1faab24bf39ce81ead7a078e1e236badd
/external/wpa_supplicant_8/src/tls/libtommath.c
cc00d5dc8483e32158b2ba61ea44b0c38d790ed7 04-May-2015 Dmitry Shmidt <dimitrysh@google.com> Cumulative security patch from commit 58606fd98722e92aaa4c2c7b8cb99cc92bd4308c

58606fd EAP-pwd server: Make sure in_frag_pos is cleared to zero on allocation
6aa5d95 EAP-pwd peer: Make sure in_frag_pos is cleared to zero on allocation
28a069a EAP-pwd peer: Fix asymmetric fragmentation behavior
3035cc2 EAP-pwd server: Fix Total-Length parsing for fragment reassembly
477c743 EAP-pwd peer: Fix Total-Length parsing for fragment reassembly
e28a58b EAP-pwd server: Fix payload length validation for Commit and Confirm
dd2f043 EAP-pwd peer: Fix payload length validation for Commit and Confirm
ef566a4 AP WMM: Fix integer underflow in WMM Action frame parser
8640cf7 WPS: Add more debug prints to httpread
1bd0d57 WPS: Replace the httpread_debug design with standard debug prints
7da4f4b WPS: Check maximum HTTP body length earlier in the process
af185d0 WPS: Extra validation step for HTTP reader
5acd23f WPS: Fix HTTP chunked transfer encoding parser
a5da657 dbus: Stop ongoing scheduled scan when scan is requested
0c28071 Fix sending ANQP request to an unknown BSS while associated
74197e0 wpa_cli: Fix memory leak when tracking networks
4504621 TDLS: Add TDLS_LINK_STATUS command to the control interface
01e87ef IBSS: Check ibss_rsn init before starting new IBSS authentication
74d912f libtommath: Fix check mp_init_multi() result
fd66aa6 Check Public Action length explicitly before reading Action Code
ff4a6d4 EAP-SIM/AKA: Explicitly check for header to include Reserved field
f5ed400 EAP-SAKE: Make attribute parser more readable
0dfb7be EAP-SAKE: Pass EAP identifier instead of full request
354e3f7 TLS: Fix debug dump of X.509 certificate
87fcb5a EAP-PAX: Fix PAX_STD-1 and PAX_STD-3 payload length validation
c3c5615 EAP-GPSK: Pass EAP identifier instead of full request
d36c803 EAP-TLS/PEAP/TTLS/FAST: Move more towards using struct wpabuf
8d9f3b8 EAP-FAST: Do not use type cast to remove const specification
07f9034 EAP-FAST: Pass EAP identifier instead of full request
f153e41 EAP-EKE: Do not pass full request to eap_eke_build_fail()
53f376c Fix a typo in function documentation
5aeebc4 D-Bus Fix network_is_persistent_group() for P2P operations
5441da2 Fix wpas_notify_network_removed()
e8181e2 dbus: Add a debug print on fill_dict_with_properties() getter failures
8a78e22 D-Bus: Fix operations when P2P management interface is used
dea0d8e RADIUS: Fix a copy-paste error in variable name

Change-Id: Ib70bf513c1f6c17974ef135806e44e120a5d5709
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/libtommath.c
700a137ab366edc72e371da68ba187b4717ee660 15-Mar-2013 Dmitry Shmidt <dimitrysh@google.com> Accumulative patch from commit 565110cd554801fa301c55010b3e9e14f43d7973

nl80211: Include interface name in more debug prints
Convert WPS NFC python scripts from using wpactrl to wpaspy
wpa_supplicant: Fix lookup of cached PMKSA
Add capability flag for IBSS and add get_capability modes
hostapd: Fix client reassociation after disconnect due to ACK failure
Fix build with CONFIG_NO_CONFIG_BLOBS
Fix build without CONFIG_CTRL_IFACE or CONFIG_NO_STDOUT_DEBUG
libtommath: Avoid a compiler warning on unused variable
libtommath: Condition fast_s_mp_mul_digs() on LTM_FAST
P2P: Remove persistent group peer if it rejects invitation
P2P: Allow shared interface channel preference to be ignored
P2P: Fix shared frequency preference for concurrent operations
P2P: Use best-overall channel in p2p_reselect_channel()
P2P: Allow all channels for multi-channel concurrency (no negotiation)
TDLS: Disable link to existing peer with lower address
Fix compiler warning when CONFIG_IEEE80211R is not included
WPS NFC: Fix build without CONFIG_WPS_ER
FT: Add support for IEEE 802.11r with driver-based SME

Change-Id: I1d5ced870c33d5cb73ecc6f04e272a3cf50f344a
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/libtommath.c
04949598a23f501be6eec21697465fd46a28840a 19-Jul-2012 Dmitry Shmidt <dimitrysh@google.com> wpa_supplicant: Update to 07-Jul-2012 TOT

commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4
Author: Jouni Malinen <j@w1.fi>
Date: Sat Jul 7 13:01:45 2012 +0300

WPS SSDP: Fix socket leaks on error paths

Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/libtommath.c
1f69aa52ea2e0a73ac502565df8c666ee49cab6a 25-Jan-2012 Dmitry Shmidt <dimitrysh@google.com> Update to new version 0.8.16 from BRCM

Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable

Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/libtommath.c
8d520ff1dc2da35cdca849e982051b86468016d8 09-May-2011 Dmitry Shmidt <dimitrysh@google.com> wpa_supplicant: Initial Revision 0.8.X

Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300

Enable CONFIG_DRIVER_NL80211=y in the default configuration

nl80211 should be preferred over WEXT with any recent Linux
kernel version.

Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/libtommath.c