| 9839ecd75c832023d4d13fd2917a8c28261ff668 |
|
07-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950
4ec1fd8 FT: Differentiate between FT for station and for AP in build
f0259c3 hostapd: Fix own wide bandwidth subelement generation (neighbor report)
0a63635 AP: Use valid status code in wpa_ft_send_rrb_auth_resp()
e4b48b7 Extend ieee80211_freq_to_channel_ext() to cover channels 52-64
c433c50 wpa_supplicant: Make CONFIG_MBO independent of CONFIG_AP
d044d2f wpa_supplicant: Get scan_result IE also from Beacon frames
451a27b hostapd: Add a configuration to set an AP as stationary
5cb5937 hostapd: Clear location configuration when it is reset
f5ec346 hostapd: Fix adding neighbor entry
99b82bf mka: Implement reference counting on data_key
23c3528 mka: Add support for removing SAs
6b6175b mka: Sync structs definitions with IEEE Std 802.1X-2010
6f551ab mka: Remove "channel" hacks from the stack and the macsec_qca driver
7d8f795 Fix typo in DigestAlgorithn
f5c15dc Fix typo in eap_example_server.c
59d7cff AP: Disable VHT in TKIP-only configuration
847ee1a wpa_supplicant: Use correct interface type when creating P2P interface
78a3b23 P2P: Clear old P2PS provision data
f69939e P2P: Clear listen state during PD-in-FIND
4cc0f90 P2P: Clear P2PS provision state on P2P flush
a818425 hostapd: Added signal level to STA tracking
a1047f5 Remove duplicate dl_list_init() for global_ctrl_dst
3765c97 hostapd_cli: Remove duplicate const in hostapd_cli_cmd()
8c88922 TDLS: Fix checks on prohibit bits
c2ad5b9 nl80211: Update channel information after channel switch notification
913c3e1 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig
81a10a9 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y
ea06a08 HS 2.0 server: Remove redundant NULL check
5f99d96 Removed redundant NULL check for sta in hostapd_event_sta_low_ack()
230b2b2 Removed redundant NULL check for b in wpabuf_concat()
641c73f driver.h: Fix a typo in a comment
2e4e4fb nl80211: Allow TDLS trigger modes to be configured to the host driver
14cd203 QCA vendor command to configure the TDLS behavior in the host driver
a18563d Extend QCA vendor attribute link layer statistics attribute
95f3703 Add more QCA vendor attribute definitions into qca-vendor.h
87416ea QCA vendor attribute to report frame aggregation failure
befdb2d nl80211: Check driver FILS capability
40a4572 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
d8f9342 nl80211: Add support for setting FILS authentication algorithm
e76e950 Sync with mac80211-next.git include/uapi/linux/nl80211.h
2a0b86d Note set_key(WPA_ALG_NONE) failure in debug log
061dac1 FILS: Claim FILS capability only if driver supports it
ff338fa FILS: Setup EAPOL state machines properly after FILS association (AP)
da24c5a FILS: Set TK after association (AP)
07e0117 FILS: Mark connection fully authorized after FILS Association (AP)
706df42 FILS: Association Response processing (STA)
e73ffa0 FILS: Add Association Response frame elements and encrypt them (AP)
78815f3 FILS: Decrypt Association Request elements and check Key-Auth (AP)
86cd692 FILS: Add elements to FILS Association Request frame
ac56c39 driver: Add option to pass FILS KEK/AAD to the driver for association
783c292 P2P: Check if the pref_freq reported by the driver supports P2P
a660993 FILS: Authentication frame processing (STA)
c4fd6d8 FILS: Process FILS Authentication frame (AP)
ffb62f2 FILS: Add a helper function for status code conversion
c1bd4ba FILS: Extend wpa_auth_pmksa_get() to support PMKID matching
c30bd28 FILS: Export IEEE 802.1X helper functions
a6228b8 ERP: Update client identity based on EAP-Initiate/Re-auth
f00b9b8 FILS: Try to use FILS authentication if PMKSA or ERP entry is available
2c2c557 SME: Clear possibly used WPA/RSN IE for new connection
0866ed0 WPA: Add debug print for not-update-own-IEs case
14de9e3 FILS: Include wpa_insert_pmkid() in non-FT builds
de57d87 ERP: Make eap_peer_finish() callable
c28767e ERP: Make eap_peer_erp_reauth_start() available
5b092fb nl80211: Make full (Re)Association Response frame available
2aa1e48 FILS: Do not clear PTK on FILS Auth/Assoc (AP)
a852ab4 FILS: Key-Auth derivation function for FILS SK
c089bc5 FILS: PMK-to-PTK key derivation for FILS authentication
ce16c48 Rename sae_data to more generic auth_data
6eb1a56 Add QCA vendor command/attr for low level DMG(11ad) RF sector control
a2675b3 wpa_cli: Mark number of char *cmd constant
e097556 hostapd_cli: Mark number of char *cmd constant
c43cf33 wpa_cli: Add completion for ssid config commands
624259d wpa_cli: Add completion for sta, deauthenticate and disassociate
4c43f44 cli: Add list_sta command
85bab32 hostapd_cli: Process events received following control iface commands
e054a43 hostapd_cli: Refactor control iface reconnects with common helper
aa2ab91 hostapd_cli: Refresh stations list on control interface reconnect
839e4a8 hostapd_cli: Add completion for sta command
bc4b680 hostapd_cli: Enable command completion and history for Android
cf296a2 hostapd_cli: Add support for cli history file
c650f92 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig
5d30f92 wpa_supplicant: Restore permanent MAC address on reassociation
e3e2fe3 Always propagate scan results to all interfaces
33111c9 Check for NULL qsort() base pointers
4b5b8a5 WPS: Force BSSID for WPS provisioning step connection
bf07e05 ERP: Do not pass full EAP header to eap_peer_erp_reauth_start()
2449791 FILS: Update EAPOL-Key Descriptor Version RX rules (AP)
16eb485 FILS: Handle Group Key msg 1/2 without MIC when using AEAD cipher (STA)
75c8563 FILS: Perform AEAD processing after PTK has been confirmed
0ab1dd0 FILS: Use AEAD cipher to check received EAPOL-Key frames (STA)
b729fd8 FILS: Use AEAD cipher to protect EAPOL-Key frames (AP)
3b5b7aa FILS: Use AEAD cipher to check received EAPOL-Key frames (AP)
2022f1d FILS: Use AEAD cipher to protect EAPOL-Key frames (STA)
1049af7 RSN: Pass full PTK to wpa_eapol_key_send() instead of KCK only
b986648 FILS: Update EAPOL-Key RX rules for FILS (AP)
352caf0 FILS: Update EAPOL-Key descriptor version rules for RX (STA)
36a50fd FILS: Set EAPOL-Key Key Descriptor Version to 0 with FILS AKMs (AP)
4a26ccd FILS: Set EAPOL-Key Key Info MIC=0 when using AEAD cipher (supplicant)
f5ff8ae FILS: Do not add Key MIC field in supplicant when using AEAD cipher
dc5bad4 RSN authenticator: Add more debug print details on EAPOL-Key RX
555ff85 wlantest: Recognize EAPOL-Key frames without MIC bit for FILS
6d014ff Make struct wpa_eapol_key easier to use with variable length MIC
94f66e8 FILS: Advertise ERP domain in FILS Indication element
c30ed45 FILS: Allow hostapd to select FILS AKM for connection
b8ae56e FILS: Allow wpa_supplicant to select FILS AKM for connection
7147a83 FILS: Add FILS flags into wpa_supplicant BSS command output
379e2b4 FILS: Add 'GET_CAPABILITY fils' for runtime check
e4d2ce1 FILS: Set FILS Capability bit in management frames from station
f55acd9 FILS: Set FILS Capability bit in management frames from AP
198a942 FILS: Add FILS Indication element to Beacon and Probe Response frames
9b7a2b8 FILS: Add wpa_supplicant configuration options
903ecbe FILS: Add hostapd configuration options
274d8b7 FILS: Add definitions for new frames and values
94318a0 FILS: Add AKM definitions
1d29163 FILS: Add new information elements
325a85b Extend AES-SIV implementation to support different key lengths
e2991ee Move CRC-32 routine from wlantest to src/utils
150948e test: FT: EAP test for mismatching keys
d0175d6 test: FT with locally generated PMK-R0/PMK-R1 from PSK
9659056 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally
a25e4ef mka: Add driver op to get macsec capabilities
53b2555 EAP-pwd: Validate Prep field in EAP-pwd-ID/Response
2875e32 EAP-pwd: Fix Prep in EAP-pwd-ID/Response when EAP_PWD_PREP_MS is used
5f5ca28 mka: Pass full structures down to macsec drivers' receive SC ops
8ebfc7c mka: Pass full structures down to macsec drivers' transmit SC ops
b70d508 LibreSSL: Fix compatibility for EAP-FAST
df42673 LibreSSL: Fix TLS initialization/deinitialization
0d42179 LibreSSL: Fix dh5 code
32d08d5 Add QCA vendor attributes for measurement frequency for FTM/AOA
cecdecd mka: Pass full structures down to macsec drivers' receive SA ops
909c1b9 mka: Pass full structures down to macsec drivers' transmit SA ops
7fa5eff mka: Pass full structures down to macsec drivers' packet number ops
f75f6e2 mka: Move structs {transmit,receive}_{sa,sc} to a common header
9d3f4a7 autoscan: Add more debug prints for cases where autoscan is not used
98529f3 The master branch is now used for v2.7 development
2462f34 Change version number to v2.6 for the release
5ac8f86 Fix PNO restart flow
14f34a7 Continue scanning if sched_scan stops unexpectedly
1ac3886 Remove disconnected APs from BSS table if likely out-of-range
ebf59eb Restart PNO/sched_scan on channel list update
746e5c2 Fix spelling mistakes in number of comments
8b66888 Add explicit enum values for QCA vendor config attributes
8f47917 MBO: Add support to send ANQP request to get cellular preference
Test: Wifi Test Suite: b/32709661
Change-Id: I249f5fec85ad69ce3879247b07f0db84136ab996
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| fe31a9a8fff325bfddbf06fc3e9edaf480824bee |
|
09-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Revert "Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950"
This reverts commit 78a5dac804c22aa6e4ec8226a864d3b0d6ccddbb.
Test: None
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 78a5dac804c22aa6e4ec8226a864d3b0d6ccddbb |
|
07-Nov-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 4ec1fd8e42bad9390f14a58225b6e5f6fb691950
4ec1fd8 FT: Differentiate between FT for station and for AP in build
f0259c3 hostapd: Fix own wide bandwidth subelement generation (neighbor report)
0a63635 AP: Use valid status code in wpa_ft_send_rrb_auth_resp()
e4b48b7 Extend ieee80211_freq_to_channel_ext() to cover channels 52-64
c433c50 wpa_supplicant: Make CONFIG_MBO independent of CONFIG_AP
d044d2f wpa_supplicant: Get scan_result IE also from Beacon frames
451a27b hostapd: Add a configuration to set an AP as stationary
5cb5937 hostapd: Clear location configuration when it is reset
f5ec346 hostapd: Fix adding neighbor entry
99b82bf mka: Implement reference counting on data_key
23c3528 mka: Add support for removing SAs
6b6175b mka: Sync structs definitions with IEEE Std 802.1X-2010
6f551ab mka: Remove "channel" hacks from the stack and the macsec_qca driver
7d8f795 Fix typo in DigestAlgorithn
f5c15dc Fix typo in eap_example_server.c
59d7cff AP: Disable VHT in TKIP-only configuration
847ee1a wpa_supplicant: Use correct interface type when creating P2P interface
78a3b23 P2P: Clear old P2PS provision data
f69939e P2P: Clear listen state during PD-in-FIND
4cc0f90 P2P: Clear P2PS provision state on P2P flush
a818425 hostapd: Added signal level to STA tracking
a1047f5 Remove duplicate dl_list_init() for global_ctrl_dst
3765c97 hostapd_cli: Remove duplicate const in hostapd_cli_cmd()
8c88922 TDLS: Fix checks on prohibit bits
c2ad5b9 nl80211: Update channel information after channel switch notification
913c3e1 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig
81a10a9 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y
ea06a08 HS 2.0 server: Remove redundant NULL check
5f99d96 Removed redundant NULL check for sta in hostapd_event_sta_low_ack()
230b2b2 Removed redundant NULL check for b in wpabuf_concat()
641c73f driver.h: Fix a typo in a comment
2e4e4fb nl80211: Allow TDLS trigger modes to be configured to the host driver
14cd203 QCA vendor command to configure the TDLS behavior in the host driver
a18563d Extend QCA vendor attribute link layer statistics attribute
95f3703 Add more QCA vendor attribute definitions into qca-vendor.h
87416ea QCA vendor attribute to report frame aggregation failure
befdb2d nl80211: Check driver FILS capability
40a4572 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
d8f9342 nl80211: Add support for setting FILS authentication algorithm
e76e950 Sync with mac80211-next.git include/uapi/linux/nl80211.h
2a0b86d Note set_key(WPA_ALG_NONE) failure in debug log
061dac1 FILS: Claim FILS capability only if driver supports it
ff338fa FILS: Setup EAPOL state machines properly after FILS association (AP)
da24c5a FILS: Set TK after association (AP)
07e0117 FILS: Mark connection fully authorized after FILS Association (AP)
706df42 FILS: Association Response processing (STA)
e73ffa0 FILS: Add Association Response frame elements and encrypt them (AP)
78815f3 FILS: Decrypt Association Request elements and check Key-Auth (AP)
86cd692 FILS: Add elements to FILS Association Request frame
ac56c39 driver: Add option to pass FILS KEK/AAD to the driver for association
783c292 P2P: Check if the pref_freq reported by the driver supports P2P
a660993 FILS: Authentication frame processing (STA)
c4fd6d8 FILS: Process FILS Authentication frame (AP)
ffb62f2 FILS: Add a helper function for status code conversion
c1bd4ba FILS: Extend wpa_auth_pmksa_get() to support PMKID matching
c30bd28 FILS: Export IEEE 802.1X helper functions
a6228b8 ERP: Update client identity based on EAP-Initiate/Re-auth
f00b9b8 FILS: Try to use FILS authentication if PMKSA or ERP entry is available
2c2c557 SME: Clear possibly used WPA/RSN IE for new connection
0866ed0 WPA: Add debug print for not-update-own-IEs case
14de9e3 FILS: Include wpa_insert_pmkid() in non-FT builds
de57d87 ERP: Make eap_peer_finish() callable
c28767e ERP: Make eap_peer_erp_reauth_start() available
5b092fb nl80211: Make full (Re)Association Response frame available
2aa1e48 FILS: Do not clear PTK on FILS Auth/Assoc (AP)
a852ab4 FILS: Key-Auth derivation function for FILS SK
c089bc5 FILS: PMK-to-PTK key derivation for FILS authentication
ce16c48 Rename sae_data to more generic auth_data
6eb1a56 Add QCA vendor command/attr for low level DMG(11ad) RF sector control
a2675b3 wpa_cli: Mark number of char *cmd constant
e097556 hostapd_cli: Mark number of char *cmd constant
c43cf33 wpa_cli: Add completion for ssid config commands
624259d wpa_cli: Add completion for sta, deauthenticate and disassociate
4c43f44 cli: Add list_sta command
85bab32 hostapd_cli: Process events received following control iface commands
e054a43 hostapd_cli: Refactor control iface reconnects with common helper
aa2ab91 hostapd_cli: Refresh stations list on control interface reconnect
839e4a8 hostapd_cli: Add completion for sta command
bc4b680 hostapd_cli: Enable command completion and history for Android
cf296a2 hostapd_cli: Add support for cli history file
c650f92 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig
5d30f92 wpa_supplicant: Restore permanent MAC address on reassociation
e3e2fe3 Always propagate scan results to all interfaces
33111c9 Check for NULL qsort() base pointers
4b5b8a5 WPS: Force BSSID for WPS provisioning step connection
bf07e05 ERP: Do not pass full EAP header to eap_peer_erp_reauth_start()
2449791 FILS: Update EAPOL-Key Descriptor Version RX rules (AP)
16eb485 FILS: Handle Group Key msg 1/2 without MIC when using AEAD cipher (STA)
75c8563 FILS: Perform AEAD processing after PTK has been confirmed
0ab1dd0 FILS: Use AEAD cipher to check received EAPOL-Key frames (STA)
b729fd8 FILS: Use AEAD cipher to protect EAPOL-Key frames (AP)
3b5b7aa FILS: Use AEAD cipher to check received EAPOL-Key frames (AP)
2022f1d FILS: Use AEAD cipher to protect EAPOL-Key frames (STA)
1049af7 RSN: Pass full PTK to wpa_eapol_key_send() instead of KCK only
b986648 FILS: Update EAPOL-Key RX rules for FILS (AP)
352caf0 FILS: Update EAPOL-Key descriptor version rules for RX (STA)
36a50fd FILS: Set EAPOL-Key Key Descriptor Version to 0 with FILS AKMs (AP)
4a26ccd FILS: Set EAPOL-Key Key Info MIC=0 when using AEAD cipher (supplicant)
f5ff8ae FILS: Do not add Key MIC field in supplicant when using AEAD cipher
dc5bad4 RSN authenticator: Add more debug print details on EAPOL-Key RX
555ff85 wlantest: Recognize EAPOL-Key frames without MIC bit for FILS
6d014ff Make struct wpa_eapol_key easier to use with variable length MIC
94f66e8 FILS: Advertise ERP domain in FILS Indication element
c30ed45 FILS: Allow hostapd to select FILS AKM for connection
b8ae56e FILS: Allow wpa_supplicant to select FILS AKM for connection
7147a83 FILS: Add FILS flags into wpa_supplicant BSS command output
379e2b4 FILS: Add 'GET_CAPABILITY fils' for runtime check
e4d2ce1 FILS: Set FILS Capability bit in management frames from station
f55acd9 FILS: Set FILS Capability bit in management frames from AP
198a942 FILS: Add FILS Indication element to Beacon and Probe Response frames
9b7a2b8 FILS: Add wpa_supplicant configuration options
903ecbe FILS: Add hostapd configuration options
274d8b7 FILS: Add definitions for new frames and values
94318a0 FILS: Add AKM definitions
1d29163 FILS: Add new information elements
325a85b Extend AES-SIV implementation to support different key lengths
e2991ee Move CRC-32 routine from wlantest to src/utils
150948e test: FT: EAP test for mismatching keys
d0175d6 test: FT with locally generated PMK-R0/PMK-R1 from PSK
9659056 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally
a25e4ef mka: Add driver op to get macsec capabilities
53b2555 EAP-pwd: Validate Prep field in EAP-pwd-ID/Response
2875e32 EAP-pwd: Fix Prep in EAP-pwd-ID/Response when EAP_PWD_PREP_MS is used
5f5ca28 mka: Pass full structures down to macsec drivers' receive SC ops
8ebfc7c mka: Pass full structures down to macsec drivers' transmit SC ops
b70d508 LibreSSL: Fix compatibility for EAP-FAST
df42673 LibreSSL: Fix TLS initialization/deinitialization
0d42179 LibreSSL: Fix dh5 code
32d08d5 Add QCA vendor attributes for measurement frequency for FTM/AOA
cecdecd mka: Pass full structures down to macsec drivers' receive SA ops
909c1b9 mka: Pass full structures down to macsec drivers' transmit SA ops
7fa5eff mka: Pass full structures down to macsec drivers' packet number ops
f75f6e2 mka: Move structs {transmit,receive}_{sa,sc} to a common header
9d3f4a7 autoscan: Add more debug prints for cases where autoscan is not used
98529f3 The master branch is now used for v2.7 development
2462f34 Change version number to v2.6 for the release
5ac8f86 Fix PNO restart flow
14f34a7 Continue scanning if sched_scan stops unexpectedly
1ac3886 Remove disconnected APs from BSS table if likely out-of-range
ebf59eb Restart PNO/sched_scan on channel list update
746e5c2 Fix spelling mistakes in number of comments
8b66888 Add explicit enum values for QCA vendor config attributes
8f47917 MBO: Add support to send ANQP request to get cellular preference
Test: Wifi Test Suite: b/32709661
Change-Id: If11d88f812812543dab6839879e815892a39f963
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 31a29cc7ed87b62465c7e01f03484f4643d12309 |
|
10-Mar-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f2d6c17aa0f9107a0e8092238b849461447cdd21
f2d6c17 nl80211: Support network hierarchy of a master interface under bridge
f85399f Reserve QCA vendor specific nl80211 commands 116..118
3bd5886 hostapd: Handle running out of DFS channels
cc1af6f FST: Fix session setup failure with peer without MB IE
dfe0745 P2P: Add optional op_class argument to P2P_SET listen_channel
e4a1469 P2P: Adjust service discovery maximum fragment size for 60 GHz
c7fb678 D-Bus: Add association response status code property for failure cases
2940bf6 hostapd: Use ifname of the current context in debug messages
6448e06 hostapd: Allow use of driver-generated interface addresses
f2accfe AP: Save EAPOL received before Association Response ACK
1307301 wpaspy: Add support for TERMINATE command
a2c88a8 wpaspy: Add support for UDP connection
3e67171 hostapd: Add global TERMINATE command
618f5d0 hostapd: Add INTERFACES ctrl_iface command
180e5b9 hostapd: Update ctrl_interface for UDP to include the selected port
56e2fc2 wpa_supplicant: Add ctrl parameter to INTERFACES command
b9066c6 hostapd: Allow UDP ctrl_iface configuration to set the UDP port
56885ee hostapd: Add UDP support for ctrl_iface
acf57fa ctrl_iface_common: Use sockaddr_storage instead of sockaddr_un
89b781b hostapd: Use common functions for ctrl_iface
1a2124c wpa_supplicant: Use common functions for ctrl_iface
ca974ae Add common ctrl_iface files
d60886c wpa_supplicant: Add monitor support for global UDP ctrl_iface
f0e5d3b wpa_supplicant: Share attach/detach/send UDP ctrl_iface functions
db7fb43 wpa_supplicant: Allow UDP ctrl_iface configuration to set the UDP port
3598695 P2P: Update peer WFD IE from PD Response and GO Negotiation Response
c69ef1d P2P: Respect p2p_ignore_shared_freq on p2p_group_add
4115b05 P2P: Fix shared freq print in wpas_p2p_init_go_params()
Change-Id: Id939064b95210ee1a195f7a9f7c069da520d77ca
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| b97e428f8acf1ecb93f38f8d0063d2f2fd0bc36e |
|
08-Feb-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit c06c9099f0d0827feae5622097bd8ac946eca5ea
c06c909 Use stronger PRNG for MS-MPPE-Send/Recv-Key salt
9e1f1bd eloop: Clean up coding style for eloop debug prints
f9982b3 Implement kqueue(2) support via CONFIG_ELOOP_KQUEUE
2e69bdd eloop: Add eloop_sock_requeue()
70f4f05 wpa_ctrl: Retry select() on EINTR
df9e2c2 D-Bus: Don't do <deny send_interface="..." /> in dbus service file
9684c75 mesh: Fix peer link counting when a mesh peer reconnects
83fe38b P2P: Fall back to no VHT when starting AP/P2P GO
360a9d5 P2P: Reduce off channel wait time for some P2P Action frames
1fc63fe RADIUS: Share a single function for generating session IDs
2cbc6ff RADIUS: Redesign Request Authenticator generation
b71a64a Send an Acct-Multi-Session-Id attribute in Access-Request packets
4260e1a Add Acct-Session-Id to Accounting-On/Off
d72a005 RADIUS: Use more likely unique accounting Acct-{,Multi-}Session-Id
d689317 EAPOL auth: Move radius_cui/identity freeing to eapol_auth_free()
0ae86f9 wpa_supplicant: Fix couple of C++ compiler errors with header files
9b6177a Add Event-Timestamp to all Accounting-Request packets
d179089 GAS: Calculate response buffer length of ANQP elements
dda091c OpenSSL: Fix server side PKCS#12 processing with extra certificates
443c8e1 OpenSSL: Fix possible null pointer dereference on an OCSP error path
a3cc64f Remove -w support from wpa_supplicant README
e265838 EAP-FAST: Fix an error path in PAC binary format parsing
f91e11f D-Bus: Fix p2p interface capability message
479f46c Do not send Acct-Authentic in Accounting-On/Off
696544e RADIUS: Do not include Acct-Terminate-Cause in Accounting-On/Off
236053e Make fallback from HT40 to HT20 work
cb22e3b BSD: Zero ifindex on interface removal
a8ef133 Android: Support multiple CA certs when connecting to EAP network
80ce804 WNM: Workaround for broken AP operating class behavior
af06093 BSD: Disable interface on down
dc0ad60 BSD: Use correct ifindex from route messages
5f17b2c BSD: __FUNCTION__ -> __func__
2088ecb OSU: Add debug printing of more LogotypeExtn fields
0b905c8 Add the selector suite into wpa_parse_wpa_ie_rsn() "invalid group cipher"
03a72ea VHT: Add an interoperability workaround for 80+80 and 160 MHz channels
Change-Id: Ief9174bdec380e81025e1467c47bf1656eb39cd9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| de47be75037bccd4a11b62eedb3d4aed1b36fa67 |
|
07-Jan-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 21cb63fffd1e766c8b989125394ed0bfb05e5a4b
21cb63f OpenSSL: Fix client certificate chain building after PKCS#12 use
12a81b6 ACS: Remove unreachable case from a debug print
896607d Remove a pointer check that can never be true
a95cc47 ACS: Be more consistent with iface->current_mode checks
6014e59 P2P: Print find_start in debug log when ignoring old scan results
64845c1 l2_packet: Extend bridge workaround RX processing to cover two frames
4a539ab l2_packet: Improve bridge workaround RX processing
7a36f11 EAP-PAX: Check hmac_sha1_vector() return value
1d20c66 P2P: Clear groups first on FLUSH command
27446e4 mesh: Do not force another peering exchange on driver event
cc64fe7 mesh: Do not clear link state on driver event if exchange was started
b5f5c32 mesh: Add some more details to MPM debug messages
7d41907 nl80211: Add a missing space to a debug message
6174de6 mesh: Connection and group started/removed events into debug log
2da4a56 Add more hostapd.conf documentation for hw_mode with HT/VHT
acc3943 EAP-PEAP peer: Cryptobinding in fast-reconnect case with inner EAP
cba9ebf P2P: Try SD Query with each non-ACK peer only once per search iteration
e9ccfc3 Clear wpa_supplicant state to DISCONNECTED on FLUSH command
aeb408f HS 2.0: Add some documentation for OSEN and network block use
4f6cd3f Fix wpa_supplicant AP mode P2P IE handling if P2P is disabled
92acb40 Fix wpa_supplicant build with CONFIG_L2_PACKET=pcap
15c5606 Update copyright notices for the new year 2016
6e379c6 WPS: Testing mechanism to force auth/encr type flags
ea31912 WPS: Add a workaround for WPA2PSK missing from Enrollee auth flags
db671e0 WPS: Do not build Credential with unsupported encr combination on AP
d7c3347 HS 2.0: Postpone WNM-Notification sending by 100 ms
750f5d9 EAP-FAST: Enable AES256-based TLS cipher suites with OpenSSL
1ebb24b OpenSSL: Share a single openssl_tls_prf() implementation
dea2051 OpenSSL: Clean up function to fetch client/server random
9a42d85 OpenSSL: Drop support for OpenSSL 1.0.0
de213e8 OpenSSL: Drop support for OpenSSL 0.9.8
e79eb0c P2P: Fix P2P_FIND while waiting for listen ROC to start in the driver
944f693 P2P: Stop offchannel TX wait on P2P_STOP_FIND/P2P_LISTEN
8edd9f1 P2P: Add an option to specify group SSID in P2P_CONNECT join case
70e0cb3 P2P: Provide group SSID, if specified, to P2P Client join step
438be60 P2P: Do not accept any GO BSS entry if SSID is specified for join
35510d5 P2P: Use join SSID in the skip-PD cases
8b8d4f4 P2P: Do not accept any BSS entry for join if SSID is already known
b875276 P2P: Use group SSID, if known, for join operation even if no BSS entry
aa256cb P2PS: Add group SSID, if known, to the P2PS-PROV-DONE event
071e3bf FST: Fix handling of Rx FST Setup Request when session already exists
Change-Id: Ia48764e8663232291160fb24153fa367b9ed3015
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| d80a401aed31d06f261efd19223cf55d1a2a8228 |
|
06-Nov-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f10ff62e4eda7917a8e28fe492fd98723a5e97c4
f10ff62 Describe preferred mechanism for submitting contributions
fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
73ed03f wpa_supplicant: Add GTK RSC relaxation workaround
ea6030c Restore previous wpa_state in scan-only result handler
1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate
d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves
a34eace dbus: Remove unused dict helper functions
cdcb2d0 wpa_cli: Add support for vendor_elem_* commands
17b7032 EAP peer: Clear ignore flag in INITIALIZE state
1f1e619 Add test programs for checking libwpa_client linking
736b7cb wpa_supplicant/Makefile: Fix libwpa_client build
2e38079 TLS: Fix memory leak with multiple TLS server instances
7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending()
45c3e72 Add frequency to operating class determination for 5 GHz 100..140
e50c50d dbus: Expose interface globals via D-Bus properties
1aa0fb7 dbus: Pass property description to getters/setters
c93b7e1 RSN: Check result of EAPOL-Key frame send request
95be79f Allow -1 as value to disable frag_threshold
bc50bb0 Extend the range of values for the RTS threshold
053693d hostapd: Add feature to start all interfaces at the same time in sync
9578413 Reserve QCA vendor specific nl80211 commands 110..114
5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing
5d1d69a P2P: Filter control chars in group client device name similarly to peer
f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails
1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal
d8fd633 Do not write ERROR level log entries if debug file is not used
67deaa5 l2_packet: Add build option to disable Linux packet socket workaround
fa46426 RSN: Do not try to connect if PMF disabled and AP requires it
8acbe7f WNM: Verify WNM Sleep Mode element length
dacd789 WNM: Mark set TFS buffer const
...
f24b979 OpenSSL: Merge error returns
84d6a17 TLS: Remove unused tls_capabilities()
7867227 ms_funcs: Merge similar return cases
3596361 hw_features: Merge similar return case in check_40mhz_2g4()
aac1efe Reject the initial 4-way handshake if initial GTK setup fails
2da5256 Add backtrace-based error path testing mechanism
55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC
Next patches were skipped due to explicit cherry-pick:
bddc51e RSN: Stop connection attempt on apparent PMK mismatch
3fdaaa8 Throttle control interface event message bursts
a530fe7 Add wpa_supplicant EVENT_TEST control interface command
ee1e3f5 hostapd: Global control interface notifications
2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations
ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS
844dfeb QCA vendor command support to set band to driver
Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| a3dc30964aa24aea2b518246f6812663a1103490 |
|
23-Jun-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f43c1ae7989c38fe15756f12a9196a1cf798b4d7
f43c1ae P2P: Handle P2P Device dedicated interface parent removal
1ac977b nl8021: Allow sending wowlan configuration on any interface
4899702 nl80211: Remove android_genl_ctrl_resolve()
38dcc86 P2P: Consider ht/vht on P2P_GROUP_ADD command (with no params)
29292d5 ctrl_iface: Make p2p_ctrl_group_add() more robust
e4a80d8 P2P: Fix secondary channel selection for HT40
4e71758 dbus: Add RemoveClient method to remove a client from local GO
f0a79c9 D-Bus: Fix wpas_dbus_register_peer() documentation
95d62a6 D-Bus: Add missing params in WPS function documentation
790429b D-Bus: Fix function documentation for wpas_dbus_signal_p2p_go_neg_resp()
92fe746 D-Bus: Add function documentation for wpas_dbus_signal_p2p_go_neg_req()
e1dffa3 P2P: Fix PBC overlap detection
de7b02f P2P: Use the P2P Device interface in wpas_p2p_fallback_to_go_neg()
6b5147a P2P: Fix memory leak in p2p_process_nfc_connection_handover()
33ba27d EAP-FAST peer: Stop immediately on key derivation failure
144b6a0 OpenSSL: Fix memory leak on an openssl_tls_prf() error path
50a9efe P2PS: Fix Probe Response frame building in error cases
509f269 P2PS: Fix org.wi-fi.wfds matching when building the response
5fa5f84 P2PS: Add more debug prints for service info building
fdde3db P2PS: Remove unnecessary service hash filtering from p2p_reply_probe()
f2e0eec P2PS: Do not ignore other hashes if org.wi-fi.wfds hash is included
ebdc32f P2PS: Fix service hash matching for org.wi-fi.wfds
24533f7 P2PS: Fix p2p_find handling to allow "wildcard" with other hash values
f33a31b P2PS: Verify service name length in P2P_FIND command
129b621 P2PS: Fix P2P_FIND seek parameter parsing
83e520e P2PS: Add a wildcard with other advertised service info
c5d3cad P2PS: Re-factor p2p_buf_add_service_instance function
13f6f61 wpa_cli: Fix process termination in wpa_cli action mode case
b4c0f58 Clear allocated debug message buffers explicitly
14fd033 Clear control interface command explicitly from stack
d95c599 P2P: Fix group interface addition failure properly for concurrent case
e12c400 P2PS: Refactor p2p_data::query_hash and p2p_data::query_count use
4839da4 P2P: Add vendor elements into Invitation Response frames
886f583 P2PS: Delete p2ps_svc_found from struct p2p_data
3f048aa P2PS: Add a function to free a PD context
8f52409 P2P: Prefer direct Probe Response frames over GO's client list
4e8817f P2P: Use more precise device timestamping for group clients
0799b3f P2P: Specify frequency when sending Probe Response frame
5d180a7 drivers: Add freq parameter to send_mlme() function
5143e7e P2P: Fix return value of p2p_reply_probe() and p2p_probe_req_rx()
07c1e98 P2PS: Enable Probe Request frame processing by P2P Client
734ddf6 P2P: Add rx_freq parameter to Probe Request frame handler
e6012e8 P2P: Update target GO Device Address from BSS entry during join
a9a4841 Remove duplicated country code from operating class lists
132dfbe Fix removal of tagged interface and bridge when multiple BSS share them
e11776a Combine multiple function calls to a single statement
b649c0a dbus: Add Reconnect command to D-Bus Interface
f4a234a doc: Update D-Bus GONegotiationRequest Signal: add device_go_intent
0c9fb14 P2P: Add Operating class 125 for P2P supported channels
Change-Id: I782c1403985248ff994f484282efa6519fd369e9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 9d9e60286e05ae45025b672636490bd12586138d |
|
23-Apr-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative security patch from commit ca68a8b561c48393c8ba25055ce294caaa3ac008
ca68a8b WPS: Explicitly reject Public Key attribute with unexpected length
6b94f71 WPS: Truncate variable length string attributes to maximum length
f4b64c6 Simplify VHT Operation element parsing
d6fefd6 Simplify HT Operation element parsing
40baac0 Simplify VHT Capabilities element parsing
baae4cb Simplify HT Capabilities element parsing
b39a059 Simplify Timeout Interval element parsing
e8997b9 Simplify ERP element parsing
f87c99c Simplify DSSS Parameter Set element parsing
ae7a42b FT: Check FT, MD, and Timeout Interval length in the parser
c9bf7b6 Fix a memory leak on mesh_attr_text() error path
2531036 FT: Fix WMM TSPEC validation in driver-based AP MLME case
632931c P2P: Use WPS_SEC_DEV_TYPE_MAX_LEN in P2P array definition
0f5acfb Use common is_ctrl_char() helper function
5a041ac WPS: Ignore too long SSID attribute
d6c3067 Replace SSID_LEN with SSID_MAX_LEN
eaa8eef Replace MAX_SSID_LEN with SSID_MAX_LEN
81847c2 Replace HOSTAPD_MAX_SSID_LEN with SSID_MAX_LEN
6fb761c Replace WPA_MAX_SSID_LEN with SSID_MAX_LEN
d9d1b95 Use SSID_MAX_LEN define instead of value 32 when comparing SSID length
65b1025 WPS: Ignore too long Device Name attribute
cc6f243 Add WPS_DEV_NAME_MAX_LEN define and use it when comparing length
dd3d857 P2PS: Check for maximum SSID length in Persistent Group Info
05e46a9 Ignore too long SSID element value in parser
90758f0 Mark QCA vendor command id 53 reserved, but not used anymore
f41ded6 Remove unused leftover from multi-SSID design
cb71a83 OpenSSL: Clean up TLS PRF implementation
7f90a23 Add QCA vendor subcmd for OCB
897418a eap_example: Fix configuration by added DH parameters
Change-Id: If688231edfce41163ef0c1f0ad75291a9bdfbe81
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 216983bceec7c450951e2fbcd076b5c75d432e57 |
|
06-Feb-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 2c0efd9e49b15da163cee659409eee85390620c3
2c0efd9 P2P: Fix stopping on search after SD callback
db3168d OpenSSL: Use SSL_cache_hit() when available
68ae477 OpenSSL: Use library wrapper functions to access cert store
abe96d0 P2P: Clean up Listen channel optimization debug prints
d2ca6ba Fix hostapd obss_interval documentation
d027c7b Fix 20/40 MHz co-ex report processing with obss_interval=0
93eca61 P2PS: Do not remove pending interface on p2p_stop_find
ae2dd83 P2PS: Allow PD retry in SEARCH and LISTEN_ONLY also
87d5ef5 P2PS: Add commands to control interface redir list
0cf12b3 P2PS: Send P2P_FIND_STOPPED event during P2P SD also
306aaf4 P2PS: Start WPS registrar upon GO formation
9e96e46 P2PS: PD Response processing
ab8ee77 P2PS: Provision Discovery fail event
1300cc8 P2PS: PD Request processing and PD Response building
5fefce2 P2PS: Callback to send P2PS provisioning events
9a58e52 P2PS: Callback to create pending group after sending PD Response
895d94d P2PS: Callback to remove stale persistent groups
f309c18 P2PS: ASP provisioning commands to control interface
6d90851 P2PS: Process P2PS provisioning commands
369678a P2PS: Add P2PS attributes into PD Request if requested
59fec34 P2PS: Allow p2p_build_ssid() to use pre-set SSID
d4b43b5 P2PS: Add support to send ASP-RESP events
6df08d0 P2PS: Logic to parse GAS requests for ASP services
5a4102c P2PS: Add support to send ASP service requests
095b3c4 P2PS: Add Application Service Info to device found events
4660e73 P2PS: Add Advertised Service Info into Probe Response frames
9e7321e P2PS: Parse Probe Request frames for matching ASP hashes
ae9d45f P2PS: Extend add/del services logic to support ASP
ea8e033 P2P: Allow p2p_get_group_num_members() to be called with NULL
4f88fc0 P2PS: WPS changes needed for P2PS default PIN
1a94b0a P2PS: Add service hash to Probe Request frames
5177509 P2PS: Add option to specify seek strings into P2P_FIND
5f18501 P2PS: Helper functions to build new P2P attributes
60d1148 P2PS: Add parsing of new P2P attributes
b9348be P2PS: Add new P2P identifier assignments from P2P spec v1.5
c3d6c71 Add helper functions for escaping and unescaping UTF-8
66eaf8a Fix driver-offloaded offchannel TX done processing
c5e154c P2P: Add P2P state into p2p_send_action_cb() debug entry
f2dc06e P2P: Ignore remain-on-channel callback event if not waiting for one
6a6569b HS 2.0R2: Add password to DB in case of machine managed subscription
f0d0a5d Improve BSS selection with default noise floor values
7f7bfba Add an option allow canned EAP-Success for wired IEEE 802.1X
49fcc32 EAP-MSCHAPv2 peer: Add option to disable password retry query
66bc683 hostapd: Simplify vlan_add_dynamic error paths
99805a0 Interworking: Convert wpa_printf() to wpa_msg()
b42f539 Add a variable to handle extra CFLAGS values
e6dd819 Work around Linux packet socket regression
7650f9e Fix resource leaks on rsn_preauth_init() error paths
a565e03 dhcp_snoop: Make IPv4 addresses human readable in debug log
2dd4f3a Fix STA re-bind to another VLAN on reauthentication
4437f8f Free old eap_user_file data on configuration change
1180dd6 WPA auth: Disconnect STA if MSK cannot be fetched
40aaa64 WPA auth: Clear temporary MSK storage from stack explicitly
01b481a Convert couple of remaining printf to wpa_printf in ap_list
bfaefd5 EAP-PEAP server: Fix Phase 2 TLV length in error case
745d936 mesh: Create new station entry on popen frames
41bff86 mesh: Always free the station if peering failed
871ff0b mesh: Sync plink state with kernel
ba42261 Simplify eapol_sm_notify_pmkid_attempt()
993a865 Add eap_session_id to wpa_supplicant STATUS output
f19c907 OpenSSL: Implement aes_wrap() and aes_unwrap()
fee31f7 OpenSSL: Remove support for versions older than 0.9.8
8bf3030 OpenSSL: Use a common helper function for HMAC
983c6a6 OpenSSL: Replace internal HMAC-MD5 implementation
Change-Id: I5743003f14efae324537f7dc2c5e6ada892a33a7
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 2e67f06149ff649fb6f8782bad041d3d9124685e |
|
16-Jul-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 6d00ab04302df257cb3092b2b31b4eac42e77569
6d00ab0 nl80211: Ensure nl_preq unregistration on driver deinit
71a0e39 P2P: Make unrecognized vendor elements available in P2P_PEER
86bd36f Add generic mechanism for adding vendor elements into frames
Change-Id: I392072a37d8dbfc92769082b60f052f7095466b6
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 4582d2a5dd8180c52eb95b1100fb183b9a289708 |
|
28-Feb-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 06c7b7f0b5f4deed675a7b81e33830311da7339a
06c7b7f HS 2.0R2: Fix temporary network disabling in Deauth Req case
c5c2d94 P2P: Cancel offchannel TX wait on PD Response TX status
1578796 TDLS: Work around interop issues with supported operating class
b7fb98f Interworking: Fix already-connected check to verify network priority
7c373ac Interworking: Fix last-network preference to not override priority
f54e924 HS 2.0R2: Fix req_conn_capab example
Change-Id: I17953fc05421bc5d454f4081fbfe303f4bf2d6fd
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 051af73b8f8014eff33330aead0f36944b3403e6 |
|
22-Oct-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 538922a628d4f5403b9a96b171a59235bcb3d921
538922a dbus: Add boolean AllowRoam option to Scan() method options dictionary
c6f5dec Don't start second scan when changing scan interval
cd3b070 nl80211: Fix DFS radar event parsing
2b72df6 nl80211: Free BSS structure even if netdev does not exists
41cc50d nl80211: Update send_action_cookie on AP-offchannel-TX path
313424d GAS: Add support for multiple pending queries for the same destination
cbc5484 GAS: Do not start new scan operation during an ongoing GAS query
c377514 GAS: Delay GAS query Tx while scanning/connecting
24c694b GAS: Delay GAS query Tx while another query is in progress
7255983 WPS: Clear after_wps from number of new locations
73b54d6 P2P: Fix Operating Channel in Invitation Request for operating group
dc46fd6 P2P: Cancel offchannel TX wait on Invitation Response RX
0c92963 D-Bus: Clean up debug print for P2P invitation result
8d82c21 P2P: Fix PD retry channel on join-a-group case
d285888 P2P: Add GO BSS entry details to debug log on join-a-group
512629a P2P: Accept Invitation Response non-success without Channel List
e241b1b eap_proxy: Fix IMSI fetch for home vs. visited network determination
db13605 EAP-AKA/AKA' peer: Allow external USIM processing to be used
569ccf7 EAP-SIM peer: Allow external SIM processing to be used
84dc137 hlr_auc_gw: Add GSM-AUTH-REQ command
a5d44ac EAP peer: Add framework for external SIM/USIM processing
7e8bc7d eapol_test: Initialize BSS lists
bceb843 Send CTRL-RSP command response before processing EAPOL update
b607796 eapol_test: Fix external EAP request mechanism
94de082 eapol_test: Initialize wpa_s->global to fix ctrl_iface
f07bba3 Android: Add dfs.c into build
0cf0af2 WNM: Set Disassoc Imminent flag in ESS Disassoc Imminent frame
f47c145 Interworking: Add required_roaming_consortium parameter for credentials
a83e574 GAS: Update timeout from TX status handler
e88060e HTTP server: Allow TCP socket to be reused
9bc3386 Add test option for specifying hardcoded BSS Load element
9c7e43a Define BSS Load element id
56f5af4 Interworking: Add support for QoS Mapping functionality for the STA
850e1c2 atheros: Add support for QoS Mapping configuration
c551700 Interworking: Add support for QoS Mapping functionality for the AP
ac1bc54 Interworking: Add domain_suffix_match for credentials
463c8ff Interworking: Add support for multiple home FQDNs
01f809c Add AAA server domain name suffix matching constraint
be7963b OpenSSL: Fix code indentation in OCSP processing
899cc14 hostapd: Add support for DFS with 160 MHz channel width
6de0e0c Mark DFS functions static and rename them
58b73e3 hostapd: DFS with 40/80 MHz channel width support
846de15 DFS: Add more parameters to radar events
04e8003 nl80211: Use struct hostapd_freq_params with start_dfs_cac
72c753d hostapd: Split hostapd_set_freq to helper function
e76da50 hostapd: Add AP DFS support
Change-Id: Ie9ed4662ba6d81e6d8b14bccb29ffa192becf0f2
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| b6e9aaf735990dc64cdb6efccc03d076768eabf3 |
|
20-May-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit d5b559b6418c2bd09663e0d09e93a6592357fdce
d5b559b WNM: Add disassociation timeout processing for ESS_DISASSOC
f65f539 GAS: Reduce query timeout to two seconds
7a56af5 GAS: Assign new dialog token even if previous one is free
9e1ecab GAS: Ignore replays if previous frag_id without dropping GAS session
fa7ae95 Add test code for fetching the last configured GTK
576bce9 P2P: Direct global ctrl_iface commands automatically for P2P
c4bf83a P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
7793c95 Clean up AP-STA-CONNECTED/DISCONNECTED prints
92c4465 P2P: Mark P2P events global (not specific to interface)
ed496f1 P2P: Clean up debug prints
710ae9a P2P: Move p2p_find stopped event message into p2p_supplicant.c
47bfe49 Add wpa_msg_global() for global events
214e428 Allow global ctrl_iface monitors
89c7ac5 wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
faf9a85 Add band option (2.4 vs. 5) for filtering scans
b83b1b2 Android: Clarify keystore include directories
6f1127c Android: Add a top level Android.mk
d2a9e2c Abstract and Android sockets for global ctrl_iface
6fd5cea wpa_cli: Allow global interface to be used in interactive mode
2925756 wpa_supplicant: Add -G argument to specify global ctrl group
cf3bebf Allow global ctrl_iface to be used for per-interface commands
058c863 FT RRB: Fix a memory leak on error path
Change-Id: I32a4afb43894167a30c4b0df18fd4846a2945c7c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 4b06059785b935dd1f4f09314e4e12c417d2c6a4 |
|
30-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b57b560034f1bb1ad3a3892228940dde97323c0e
b57b560 wpa_supplicant: Default to nl80211 instead of wext
ee28f08 hostapd: Add more messages for error paths
61d2ce2 hostapd: Reject configuration file without interface parameter
a8a7890 Clear extra_blacklist_count on FLUSH command
c646862 WPS ER: Allow UPnP interface to be forced
728d971 Use status code 17 (unable to handle new STA) on max-STA limitation
5e24dc8 Add dup_binstr() to help common binary string tasks
8b44ad7 Use os_zalloc() instead of os_malloc() + os_memset()
2c48211 FT RRB: Validate os_malloc() return value before using it
7ca902b Make vlan_file optional if dynamic_vlan is used
bdb112d Add bitfield routines
04382f7 NFC: Add no waiting and no multiple operations options for scripts
fe90496 WPS: Fix AP auto configuration on config token generation
28fcfb6 NFC: Increase wpa_cli command buffer size
8f7a6dd WPS NFC: Allow Device Password ID override for selected registrar
aaecb69 WPS: Use generic MAC Address attribute builder
9ccd916 P2P: Clean up channel--frequency conversion functions
e864c0a Use a common frequency to channel conversion function
02db75b FT: Reset FT flag upon STA deauthentication
7800d45 P2P: Set P2P_DEV_PEER_WAITING_RESPONSE from TX status callback
d78d3c6 EAP peer: Add check before calling getSessionId method
dd57970 Disable network temporarily on repeated connection failures
Change-Id: If8078d5c1ff40ea806e844543cf6f2bf9d24b7ac
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 444d567b27731d8572ef37697dd12fd1c37c2f24 |
|
01-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 17b8995cf5813d7c027cd7a6884700e791d72392
17b8995 Interworking: Try to use same BSS entry for storing GAS results
3db5439 Optimize Extended Capabilities element to be of minimal length
8cd6b7b hostapd/wpa_s: Use driver's extended capabilities
acb5464 Add ctrl_iface command FLUSH for clearing wpa_supplicant state
97236ce WPS: Skip rescanning after provisioning if AP was configured
4342326 Add ignore_old_scan_res configuration parameter
9599ccc WPS: Clear after_wps on new WPS connection
702621e WPS: Use latest updated BSS entry if multiple BSSID matches found
ab547b5 WPS: Add more helpful debug for invalid WPS_REG command parsing
a679c0f WPS: Allow hostapd process to control independent WPS interfaces
ccdff94 WPS AP: Add support for reconfiguration with in-memory config
8970bae nl80211: Use nla_nest_start/end instead of nla_put_nested
558d69e P2P: Omit P2P Group Info in case of no connected peers
65a32cd AP: Fix infinite loop in WPA state machine when out of random bytes
a5f61b2 Fix OLBC non-HT AP detection to check channel
69554d7 ap_list: Remove unused functions
08c99ca ap_list: Remove unused iteration list pointers
6b16917 ap_list: Remove unused fields
66f1f75 P2P: Fix provision discovery response handling in some cases
2f9b66d Extend ROAM command to handle multiple SSIDs per BSS
Change-Id: I46002b1d3bbf6e376c2ae09bcb2c824c54805bbd
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 37d4d6a4efea4ef4f864347ac8ed8d62a9e19f90 |
|
18-Mar-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 52728dcd25b5074fb7c0493a8155f096089ad6d0
P2P: Stop P2P_PD_DURING_FIND wait on PD Response RX
P2P: Postpone P2P scan only if station mode scan is pending
Use special scan result processing steps only on requesting interface
P2P: Re-start P2P operation if station mode scanning is stopped
P2P: Use common function for re-starting P2P scan after station scan
Change-Id: I62bb738a912483647606de1a5bd5357346ebd8f9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| f86232838cf712377867cb42417c1613ab5dc425 |
|
20-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b618a469c42120e984ab1c85ed6058504d1fca78
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Sat Feb 16 19:54:09 2013 +0200
Interworking: Select highest priority cred if multiple matches
Interworking: Select highest priority cred if multiple matches
GAS server: Fix a regression in GAS server callback
hostapd: Fix Max SP Length derivation from QoS Info
nl80211: Configure STA Capabilities and Extended Capabilities
Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
WPS: Fix build without CONFIG_WPS_NFC
WPS: Add support for NFC handover select generation with wpa_supplicant
WPS: Update NFC connection handover documentation
WPS: Add support for config token generation with wpa_supplicant
WPS: Allow password token to be written with nfcpy
WPS: Use pre-configured NFC password token instead of overriding it
TDLS: Pass peer's Capability and Ext Capability info during sta_add
TDLS: Pass peer's HT Capability and QOS information during sta_add
nl80211: Add debug prints for STA add/set operations
TDLS: Fix add/set STA operation
Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
WPS: Allow Device Password to be changed from M1 to M2
WPS: Fix wps_reg nfc-pw option
TDLS: Tear down peers when disconnecting from the AP
P2P: Do not use old scan result data for peer discovery
Use more accurate timestamps for scan results
P2P: Postpone P2P-DEVICE-FOUND if config_methods not known
P2P: Do not allow peer update to clear config_methods
WPS: Report NFC connection handover completion differently
P2P: Avoid concurrent scans during all steps of group formation
P2P: Cancel group formation timeout on group removal (on client)
WPS: Change listen time to match nfcpy default (250 ms)
WPS: Report only the carrier record from NFC to wpa_supplicant
WPS: Fetch only the carrier record from wpa_supplicant for NFC
WPS: Update nfcpy script to support AP mode NFC connection handover
WPS: Add command for fetching carrier record for NFC handover
WPS: Clean up debug prints with nfcpy
WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy
WPS: Use alternating poll/listen for NFC peer discovery with nfcpy
WPS: Configure logging to show nfcpy log message
WPS: Add an example python script for NFC operations with hostapd
hostapd: Do not change HT40 capability due to OBSS scan
dbus: Add missing signal description for WPS (7)
EAP peer: Add Session-Id derivation to more EAP methods
EAP peer: Add Session-Id derivation
EAP-IKEV2 server: Fix invalid memory freeing operation
eap_proxy: Add a dummy implementation for compilation testing
eap_proxy: Add mechanism for allowing EAP methods to be offloaded
Android: Allow setgroups to be overridden from build configuration
P2P: Send p2p_stop_find event on failure to start pending p2p_find
P2P: Fix GO Probe Response IEs when Wi-Fi Display is enabled
Capability matching for 60 GHz band
nl80211: Add ctrl_iface message for AP mode connection rejection
P2P: Allow local configuration to use 5 GHz band 40 MHz channels
Fix BSS RANGE command for no exact id match cases
Change-Id: Iac9284bba31db40911aecc3adf2843c9b1576db1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| a54fa5fb807eaeff45464139b5a7759f060cec68 |
|
15-Jan-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit dc013f1e37df3462085cf01a13f0c432f146ad7a
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue Jan 15 12:03:29 2013 +0200
eapol_test: Remove unnecessary header file inclusion
- P2P: Send P2P-FIND-STOPPED event in the new continue-search states
- P2P: Add some more details on Service Query TLV format
- P2P: Use the same Dialog Token value for every GO Negotiation retry
- P2P: Publish more connected clients info in Probe Response frames
- P2P: Fix some memory leaks in p2p_add_device()
- P2P: Use the same Dialog Token value for every PD retry
- P2P: Document operating channel selection functions
- P2P: Always re-select operating channel if not hard coded
- P2P: Do not allow re-selection of GO channel if forced_freq in use
- P2P: Set FORCE_FREQ flag as part of p2p_prepare_channel()
- P2P: Share a single function for GO channel selection
- P2P: Prefer operating channels where HT40 is possible
- P2P: Be more careful with wpa_config_update_psk() call
- P2P: Allow PSK to be used instead of passphrase for persistent GO
- P2P: Consider age for the P2P scan results
- Move some P2P offchannel operations to offchannel.c
- P2P: Add more complete description of p2p_cancel
- P2P: Allow p2p_cancel to be used to stop p2p_connect-join operation
- Interworking changes
- WNM changes
- WPS changes
- SAE changes
Change-Id: I38b847d3460066cc58aecbcf67266bfcff1d344e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| d5e4923d04122f81300fa68fb07d64ede28fd44d |
|
04-Dec-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit f5f37d3a4fc2df2a24676b4f95afca15ed793cba
Author: Jouni Malinen <j@w1.fi>
Date: Sun Nov 25 22:05:32 2012 +0200
Fix REAUTHENTICATE command after PMKSA caching
The current PMKSA cache entry needs to be clear to allow EAPOL
reauthentication to be started in case this association used PMKSA
caching.
- Remove old WPS_OOB NCF
- WPS: Add preliminary NFC connection handover support for Enrollee
- WPS: Reenable the networks disabled during wpa_wpas_reassoc
- P2P: Avoid multi-channel scans when they are not needed
- P2P: Allow discoverable interval for p2p_find to be configured
- P2P: Allow all channels with multi-channel concurrency
- Bonjour changes
- Remove disassociate
- HS 2.0 changes
- Add preliminary support for using SQLite for eap_user database
- Add SAE support
- Add disallow_aps parameter to disallow BSSIDs/SSIDs
Change-Id: I85358a05b39d46b8db49acdad667e771c580b05c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 91c40cdce17424d9a4718876becf0b7811cf68f2 |
|
25-Sep-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: P2P-related fixes
- P2P: Show own channel list in debug log
- P2P: Allow peer to propose channel in invitation process
- P2P: Clear sta_scan_pending on group removal
- P2P: Fix ignoring of PD Response due to dialog token mismatch
BUG: 7226065, 7231289
Change-Id: Iacb0f85d80f63bcdf311ccc0d29d0c282a0c0576
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 61d9df3e62aaa0e87ad05452fcb95142159a17b6 |
|
30-Aug-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 29-Aug-2012 TOT
commit 6ffdc2f7bd496ace7a46e055f9714e7db4b1f722
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Fri Mar 2 22:31:04 2012 +0200
WFD: Add preliminary WSD request processing and response
This commit does not yet address support for different device roles,
i.e., the same set of subelements are returned regardless of which
role was indicated in the request.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
Change-Id: I9d63acce719b982c02e589bb59602382e82988c8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT
commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4
Author: Jouni Malinen <j@w1.fi>
Date: Sat Jul 7 13:01:45 2012 +0300
WPS SSDP: Fix socket leaks on error paths
Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 497c1d5e50162d6b3c1cce5dbd9c5fd9da69aaef |
|
22-Jul-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
Add P2P support for BRCM CFG80211 driver
Change-Id: Iafec4bedbd33836d0a64e7ea054d8a46ef8ec204
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 75ecf5267604f166b85a7ee2cf0d9cb682966680 |
|
28-Jun-2011 |
Jouni Malinen <jouni@qca.qualcomm.com> |
Accumulative patch from commit 20a0b03debef66cc57b0c34a05f8be5229be907c
atheros: Fix auth_alg configuration for static WEP
nl80211: Implement set_rate_sets for non-hostapd AP case
nl80211: Enable more AP callbacks for non-hostapd AP mode
nl80211: Re-order functions to group AP/hostapd specific code
Remove compiler warning for non-P2P builds
random: Add support for maintaining internal entropy store over restarts
Fix a compiler warning on WPS-AP-without-UPnP builds
P2P: Retry provision discovery requests in IDLE state
P2P: Add callback for provision discovery failure
P2P: Add wpas_notify_p2p_provision_discovery()
P2P: Add group started notification
DBus: Move wpas_dbus_new_decompose_object_path()
DBus: Refactor array adding, add binary arrays
DBus: Add support for P2P primitives
DBus: Fix some typos on comments
Fix CONFIG_AP=y build without CONFIG_P2P=y
Fix non-P2P D-Bus build
nl80211: Add support for driver-based PMKSA cache
P2P: Start GO without extra scan step
Remove a compiler warning on uninitialized variable
Add EVENT_RX_ACTION handler for hostapd
Fix hostapd build without NEED_AP_MLME=y
Fix AP selection to check privacy mismatch and IBSS with WPA/RSN IE
bsd: Fix set_key() sequence number endian issue
Add a copyright and license statement for a radiotap header file
Use nl80211 as an example instead of WEXT
Add notes for CONFIG_WPS_ER build configuration option
Fix CONFIG_NO_WPA_PASSPHRASE=y build
hostapd: Don't mask out non-symmetric STA HT caps
P2P: Enable P2P capability advertisement on D-Bus
P2P: Update D-Bus network object semantics during group formation
P2P: Show P2P peer signal level in D-Bus P2P device properties
P2P: Fix P2P device signal level type in D-Bus
P2P: Add dissasoc_low_ack in P2P device properties
P2P: More complete persistent group management over D-Bus
P2P: Add WpsFailed signal in P2P D-Bus
P2P: Update listen and operating channel from P2P D-Bus
P2P: Fix WpsFailed signal in P2P D-Bus
atheros: Fix glibc 'invalid pointer' error when WPA_TRACE is enabled
Clear WPA and EAPOL state machine config pointer on network removal
20a0b03debef66cc57b0c34a05f8be5229be907c
Change-Id: I2b83bf86ba9c7a9a218638be7b4de31d209cdde1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|