293335998d38c497293b1c41f7ad8342b507d458 |
|
09-Jan-2017 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 05e5e615e6a26d7a9f5bd0569a0baeae1bcdee49 05e5e615e AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad 0c4b9025c AP: Do not look for supported rates in DMG/IEEE 802.11ad e72faadb4 bgscan_simple: Fix short_scan_count comparison 517b5f928 nl80211: Zero num_modes if nl80211_get_hw_feature_data() fails 39c5da328 nl80211: Use correct attribute for scan flags in vendor scan c167662d7 eap_proxy: On SIM error flush PMKSAs only for SIM/AKA/AKA' networks 6657bb158 Fix OOM handling in neighbor report response handling 7187e2093 Allow LCI request with no subelements d73420143 RRM: Enable beacon report with active/passive scan for all drivers ec45927b8 Report received beacon report with BEACON-RESP-RX event f3383366a Report beacon request TX status as control interface event 90d9d7c32 Beacon request through hostapd control interface 73a27a634 Add hostapd configuration parameter rrm_beacon_report de6ec8b55 Enable Beacon Report using beacon table for all drivers 6774c6a9f Update copyright notices for the new year 2017 f56877414 Do not add own BSS in neighbor report with invalid op_class/channel aeff0645d FILS: Fix FILS Realm Information ANQP-element construction 76196ddb2 wpa_supplicant: Add support for Beacon Report Radio Measurement b3060bf99 common: Add helper function to convert RSSI to RCPI 1ac4dba31 wpa_supplicant: Extend verify_channel() and make it global c9ff8e5f6 common: Add function to get an operating class by its number and country e4f1d879c common: Add non-global to global operating classes conversion 96a5f14ee nl80211: Add support for additional scan parameters for beacon report c16b9f8d3 driver: Add scan support to beacon report 3c716fdbd wpa_supplicant: Refactor wpas_rrm_build_lci_report() e1b96e112 wpa_supplicant: Send rejection for unsupported radio measurements 0c73e410d wpa_supplicant: Limit RRM response size to MMPDU size 9664ab8b7 wpa_supplicant: Refactor Radio Measurement Request handling 332bf5d3f wpa_supplicant: Validate RRM request frame format ec493469f wpa_supplicant: Move RRM implementation to a dedicated file d1c74f8c9 Add RRM definitions for beacon report measurement 6a31440b8 Fix LCI request subelement processing ce691a8d9 Add CONFIG_MESH into wpa_supplicant defconfig 67129ab9e wpa_cli: Add commands to use PMKSA_GET/ADD bbad185c1 P2P: Fix compilation warning in p2p_add_device() 2977f5193 GAS: Remove unnecessarily duplicate gas_frag_limit configuration 1940559ea FT: Drop FT Action frames if ft_over_ds=0 d8de90487 Remove deprecated tx_queue_* params from hostapd.conf notes 78022c836 Fix memory leak on hostapd eap_user_file parsing error paths 02f999c6d hostapd: Remove unnecessary NULL check from parser functions fd5f29e7e Fix memory leak in hostapd BSS_TM_REQ error path handling 95de34a10 Remove trailing whitespace 45997cce4 hostapd: Add TERMINATE as per-interface command 546680f81 hostapd: Do not update dtim_period with invalid value 356773058 RADIUS server: Increase maximum number of sessions a5861afcb hostapd: Do not update invalid wep_key_len_unicast f78402ace hostapd: Do not update rejected wep_key_len_broadcast e0ba7efe5 hostapd: Do not update eapol_version with rejected value 9266d00bf hostapd: Reject invalid macaddr_acl value 8628555f9 hostapd: Check driver parameter before replacing previous value 1dfd25a68 Fix hostapd SIGHUP processing before interface is enabled 34e29dfd4 Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call 65dfa8728 mka: Make MKA actor priority configurable 9bcfd5be8 Document new D-Bus WPS properties 77fcbf7ff D-Bus: Use a helper function to get possibly NULL strings dbf524946 D-Bus: Add DeviceType in WPS property 266097fda D-Bus: Add device serial number in WPS property 3ee6a3ab3 D-Bus: Add model number in WPS property ae66822cd D-Bus: Add WPS model name as property 318d4b5be D-Bus: Add WPS manufacturer as property b20f031c6 D-Bus: Add WPS device name as property 4a45dc192 mesh: Show [MESH] flag in print_bss_info() c04a67deb hostapd_cli: Add completion for get command bf4167b9d hostapd_cli: Add completion for set command 86adff09e hostapd_cli: Completion for further commands with STA parameter 4f59ad069 hostapd_cli: Use common completion for commands that use stations 62b95eb67 hostapd_cli: Add missing command help descriptions 04f02faac Fix wpa_cipher_to_alg() return type 9187b13ad wpa_supplicant: Add BSS CURRENT control interface command d7f12e4eb OpenSSL: Make sure local certificate auto chaining is enabled 4be02b71b OpenSSL: Remove SSL_{CTX_,}_clear_options ifdefs 7655bd738 P2P: Do not use wait_time for SD Response TX without fragmentation 1f0fdaf0e Fix race condition between AssocResp callback and 4addr event a6f3761f7 eap_proxy: Add support for SIM state change indication from eap_proxy 79a54ab9f eap_proxy: Fix eap_proxy_init() prototype to use const eapol_cb 4e118c847 D-Bus: Add 'freq' option to P2P Find method to specify starting channel e414f4f02 PeerKey: Fix STK 4-way handshake regression 28fb9bb19 PeerKey: Fix EAPOL-Key processing dfc773172 Android: Add p2p_add_cli_chan=1 option 7508c2ad9 PAE: Make KaY specific details available via control interface b54f43390 FILS: Make FILS Indication element information available in BSS output 8183aee6c FILS: Add support for building FILS Realm Information ANQP-element 9cad61867 FILS: Add Realm Information ANQP-element in BSS data 26bf70e3d FILS: Separate FILS realm configuration from ERP domain 42b847ac1 FILS: Fix hashed realm name derivation 29062f293 Update various definitions based on IEEE Std 802.11-2016 aaa9c60bc Fix preauth_test build by updating add_pmkid/remove_pmkid callbacks 0babae87a Fix wpa_supplicant build error with IEEE8021X_EAPOL unset 19810d29b Make Beacon IEs available in wpa_supplicant BSS command 274e76f22 mesh: Fix channel configuration in pri/sec switch case cebda0e3e Make debug print clearer for AP/mesh mode secondary channel issues 3459381dd External persistent storage for PMKSA cache entries c57931273 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant 655dc4a43 Send "TERMINATING" event from hostapd 5149a0f04 P2P: Set p2p_persistent_group=1 at the time of reading disabled=2 065c029a5 Remove MBO dependency from Supported Operating Classes element 62cd9d792 nl80211: Specify the BSSID in the QCA vendor scan 444930e5b Define an attribute to do a specific BSSID QCA vendor scan cea761472 Add QCA vendor command definitions for IDs 61-73 cb0cc6efa Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands c313c8a5d Fix QCA vendor command values for SAR power limits a5c723adc Interworking: Clear SCANNING state if no network selected a1836de64 SME: Fix IBSS setup after shared key/FT/FILS association f49c852b5 P2P: Fix a theoretical out of bounds read in wpas_p2p_select_go_freq() 944d48588 P2P: Fix a theoretical out of bounds read in wpas_p2p_setup_freqs() 0a6c9dc70 P2P: Send P2P-DEVICE-FOUND event on peer changing device name 9a431d493 WFD: Clear wfd_subelems when P2P peer stops sending them 6e374bd44 Ignore scan results from ongoing scan when FLUSH command is issued 71ac93453 Make update_idx available in BSS control interface command 49aa88bb5 P2P: Clear PEER_WAITING_RESPONSE on GO Negotiation success c79238b6a Define a QCA vendor command to configure SAR Power limits 0f5eb69f8 Use eloop timeout for post-EAP-Failure wait before disconnection 20b1a9e23 Allow hostapd wep_key# parameters to be cleared 5ec3d510e wpa_passphrase: Reject invalid passphrase Test: Wifi Suite Change-Id: Ida52ca4e43bbc326a89d4c9848529df2d545b692 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/crypto/sha1-internal.c
|
d97138ded63ac5388da3a2b63dea563c8b44c8ec |
|
28-Dec-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 324ade51e168f28430f4429849becd0f08d507c0 324ade5 TLS: Make tls_cert_chain_failure_event() more robust c6231b5 TLS: Remove storing of never-read value 15a6813 Remove unnecessary cleanup assignment in SHA1Final() ef3866a nl80211: Don't call linux_iface_up() for a dedicated P2P Device c2ed779 mesh: Document Mesh Peering Management element structure in more detail b2817cd mesh: Check PMKID in AMPE Action frames 6c33eed mesh: Fix PMKID to match the standard ede7770 wpa_supplicant: Do not wait for monitor on P2P Device interface 1c94570 Do not wait for monitor to attach if no control interface f98674a Clone default LIBS value to LIBS_* for other tools 7d2f674 Add "GET_CAPABILITY acs" to allow ACS build option to be detected d990971 wpa_supplicant: Enable Automatic Channel Selection support for AP mode 96bc508 Handle survey event properly in wpa_supplicant d39f796 EAP-TNC peer: Remove dead code related to fragmentation 662512e P2PS: Remove dead code abbbaa4 TNC: Print received IF-TNCCS message as debug ASCII hexdump d745f02 EAP-TNC peer: Allow fragment_size to be configured a67e7e5 RADIUS: Add EACCES to list of recognized send() errno values 5bd9be4 Fix RADIUS Called-Station-Id to not escape SSID 0764dd6 TLS client: Multi-OCSP check to cover intermediate CAs d6b536f Add ocsp=3 configuration parameter for multi-OCSP 0268383 TLS: Move variable declaration to the beginning of the block b567775 TLS client: OCSP stapling with ocsp_multi option (RFC 6961) 8ea6a27 TLS server: OCSP stapling with ocsp_multi option (RFC 6961) 5addb0d Server configuration for OCSP stapling with ocsp_multi (RFC 6961) bca0872 TLS server: OCSP stapling 9532bd2 GnuTLS: OCSP stapling on the server side 6241766 Use wpa_msg() for the "RSN: PMKID mismatch" message e161451 EAP-EKE: Merge identical error return paths 13cb0a6 EAP-EKE: Reject too long Prot() data when building a frame 0ab0de8 Document previously missing key_mgmt values Change-Id: I9ac7d0da03d8baf4542e276ab20cb56e44bfa33c Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/crypto/sha1-internal.c
|
d7ff03d48f825360eec2a371e3361306f2fd721b |
|
04-Dec-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit bf3214b59321f67375df1ee85722b2beb74e1f7a bf3214b P2P: Fix re-invoked client interface completion on data connection 63502c6 P2P: Fix P2P_CANCEL for p2p_in_invitation case e007d53 EST: Comment out X509_REQ_print calls on Android with BoringSSL e6f4832 EST: Add CSR generation support with BoringSSL ed2566a EST: Implement pkcs7_to_cert() with BoringSSL 8d27efa HTTP (curl): OCSP with BoringSSL 213e158 BoringSSL: Move OCSP implementation into a separate file f846211 BoringSSL: Support new SHA_CTX definition for EAP-SIM PRF b34c623 OpenSSL: Fix build with current OpenSSL master branch snapshot 759a8a3 nl80211: Cancel all pending TX frame cookies 9ea91cd EAP-EKE peer: Fix memory leak on error path 328f49a P2P: Complete group formation on client data connection 0e559dc WPS: Support parallel UPnP WPS protocol runs bea48f7 Allow sched_scan_plans to be updated at runtime 32c0226 Add support for configuring scheduled scan plans 09ea430 nl80211: Add support for multiple scan plans for scheduled scan dd895e9 P2P: Make p2p_go_configured() more robust against unexpected calls 8811988 TLS client: Fix session_resumed status after TLS session ticket use 7fff91a Fix tls_connection_prf() regression with CONFIG_TLS=internal 1adf262 TLS: Add support for extKeyUsage X.509v3 extension 0755577 Add TEST_FAIL() support for internal hash functions 4104267 Fix memory leak on NFC DH generation error path c5864dc TLS client: Add certificate chain validation failure callbacks 896a97d TLS client: Add support for disabling TLS versions 0cbc22b TLS client: Use TLS_CONN_* flags 20804fe TLS: Add support for tls_get_version() f2a6ad0 TLS client: Add support for server certificate probing b115eeb TLS: Add TLS v1.2 signature algorithm support for SHA384 and SHA512 c0acec3 crypto: Add CRYPTO_HASH_ALG_SHA384 and CRYPTO_HASH_ALG_SHA512 0aed915 TLS client: Add signature_algorithms extension into ClientHello 9e8809a TLS client: Validate certificates with SHA384 and SHA512 hashes 6bb6a9c Add SHA384 and SHA512 implementations from LibTomCrypt library fdc1614 TLS client: Add support for validating server certificate hash 3665776 TLS client: Do not verify CA certificates when ca_cert is not specified 11c9ddb Add TEST_FAIL() condition to aes_128_cbc_encrypt/decrypt() ea52a46 EAP-SIM peer: Fix memory leak on reauth error path 1a33c94 EAP-SAKE: Fix a typo in attribute parser debug print 53401e9 Abort ongoing scans on FLUSH command e929eb3 wlantest: Add -N command line argument to remove write buffering 3c41749 hostapd: Add Transmit Power Envelope IE when VHT is enabled 2ea2166 Add control interface command for aborting an ongoing scan 4ead7cf Abort an ongoing scan before connect 4f30add nl80211: Add support for aborting an ongoing scan 5ef0b84 Sync with mac80211-next.git include/uapi/linux/nl80211.h 0530eb1 mesh: Clear wpa_s cipher selection on starting mesh 1d6955e nl80211: Fix SIGNAL_POLL in IBSS and mesh 0f29bc6 IBSS/mesh: Add support for VHT80P80 configuration c27f4c9 P2P: Add support for VHT 80+80 MHz and 160 MHz bee5d8e nl80211: Add VHT 160 MHz channel flags 5e1da9c P2P: Define operating classes for VHT 80+80 and 160 ea70811 FST: Improve parsing of Multiband IEs b47d05a FST: Make FST peer connection check more permissive in hostapd 39c3c9b Remove wpa_supplicant/tests 9b635d0 Remove link_test and test_wpa 9e68742 Fix CONFIG_NO_WPA=y build eb926f1 Comment out wpas_reenabled_network_time with CONFIG_NO_SCAN_PROCESSING f231b3d FST: Fix STA MB IEs creation ed7820b P2P: Add a testing option to force P2P GO CSA 6cbbae2 P2P: Set p2p_go_wait_client in invitation_result() cb 83702b6 Android: Give user the option for selecting browser for HS 2.0 OSU cadffac wpa_cli: Add an option to set created interface type 0f039e3 Add an option to create interface of a certain type with INTERFACE_ADD d8a3b66 driver: Make setting up AP optional when creating AP interface 36e8206 Check for LIBRESSL_VERSION_NUMBER in tls_openssl.c 2c51c0b P2P: Clear send action work without waiting on find/stop/listen 6bdc43c AP: Avoid 20/40 MHz co-ex scan if PRI/SEC switch is not allowed 757785d nl80211: Clear ignore_next_local_deauth flag cb2a926 nl80211: Clear ignore_next_local_deauth and ignore_deauth_event f32227e Add QCA vendor attribute and event to indicate subnet change status d38c7be Skip SELECT_NETWORK steps only if already connected or connecting 25eb7fc Fix EAPOL reauth after FT protocol or offloaded PMKSA cache use f68d491 FT auth: Fix EAPOL reauthentication after FT protocol run a65efbf Add VHT support for Mesh a73c984 Set WMM flag to Mesh STA by default 9a8d9f7 Assign QCA vendor command and attribute for Tx power reduction in dB 747ba10 nl80211: Do not return incomplete hw capability info 5e238cc WPS: Reconnect for a failed data connection when STA_AUTOCONNECT is 0 442cc8c dbus: Fix memory leak in sending InvitationReceived signal 0603bcb hostapd: Process MAC ACLs on a station association event (SME in driver) 89a11ad RSN: Remove check for proactive_key_caching while setting PMK offload d381963 Extend QCA roam event with subnet change indication Change-Id: I122220f59ef56e25ed2749a37370a40afafa177a Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/crypto/sha1-internal.c
|
9866086a955d00e237cc8df3722e7dff75c02532 |
|
12-Mar-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 99cd77a8c50413d44f1ebead917310468a8406de 99cd77a tests: Verify reassociate-to-same-BSS commands e8d70a7 nl80211: Hide deauth event due to forced deauth-during-auth 0f44ec8 Add a reattach command for fast reassociate-back-to-same-BSS cfc393a hostapd: Document interworking realm EAP Method types 7450c12 DFS: Add extra debugging messages 5d0d72a wpa_supplicant: Put upper bound on initial scan time delay 8c06db7 nl80211: Fix P2P Device handling when starting with RF-kill blocked 5e3ddf4 PNO: Change sched_scan_stopped event to handle pending PNO properly 737e7a0 PNO: Move and rename pno_start()/pno_stop() 1d91f50 hostapd: Process management frames only once per BSS e070051 hostapd: Allow to switch to usable DFS channels 01b9999 hostapd: Allow to switch to DFS channels if available 70ee1be hostapd: Add config option chanlist for DFS channels 09eef14 Use internal FIPS 186-2 PRF if needed 3b9c517 Fix PTK derivation for CCMP-256 and GCMP-256 e6ef73f nl80211: Add debug print of KEY_DATA and KEY_SEQ b465f5d Remove unused hostapd_wep_key_cmp() 4fb363c Fix error path handling on radius_accept_attr Change-Id: I28ecac6cbcc6f71f19a051c12b54668ca6a66e2a Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/crypto/sha1-internal.c
|
c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM - Based on 0c01d65 : Ignore TX status for Data frames from not associated STA Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/crypto/sha1-internal.c
|
8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X Based on: commit 0725cc7b7efc434910e89865c42eda7ce61bbf08 Author: Jouni Malinen <j@w1.fi> Date: Thu Apr 21 20:41:01 2011 +0300 Enable CONFIG_DRIVER_NL80211=y in the default configuration nl80211 should be preferred over WEXT with any recent Linux kernel version. Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/crypto/sha1-internal.c
|