| 293335998d38c497293b1c41f7ad8342b507d458 |
|
09-Jan-2017 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 05e5e615e6a26d7a9f5bd0569a0baeae1bcdee49
05e5e615e AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad
0c4b9025c AP: Do not look for supported rates in DMG/IEEE 802.11ad
e72faadb4 bgscan_simple: Fix short_scan_count comparison
517b5f928 nl80211: Zero num_modes if nl80211_get_hw_feature_data() fails
39c5da328 nl80211: Use correct attribute for scan flags in vendor scan
c167662d7 eap_proxy: On SIM error flush PMKSAs only for SIM/AKA/AKA' networks
6657bb158 Fix OOM handling in neighbor report response handling
7187e2093 Allow LCI request with no subelements
d73420143 RRM: Enable beacon report with active/passive scan for all drivers
ec45927b8 Report received beacon report with BEACON-RESP-RX event
f3383366a Report beacon request TX status as control interface event
90d9d7c32 Beacon request through hostapd control interface
73a27a634 Add hostapd configuration parameter rrm_beacon_report
de6ec8b55 Enable Beacon Report using beacon table for all drivers
6774c6a9f Update copyright notices for the new year 2017
f56877414 Do not add own BSS in neighbor report with invalid op_class/channel
aeff0645d FILS: Fix FILS Realm Information ANQP-element construction
76196ddb2 wpa_supplicant: Add support for Beacon Report Radio Measurement
b3060bf99 common: Add helper function to convert RSSI to RCPI
1ac4dba31 wpa_supplicant: Extend verify_channel() and make it global
c9ff8e5f6 common: Add function to get an operating class by its number and country
e4f1d879c common: Add non-global to global operating classes conversion
96a5f14ee nl80211: Add support for additional scan parameters for beacon report
c16b9f8d3 driver: Add scan support to beacon report
3c716fdbd wpa_supplicant: Refactor wpas_rrm_build_lci_report()
e1b96e112 wpa_supplicant: Send rejection for unsupported radio measurements
0c73e410d wpa_supplicant: Limit RRM response size to MMPDU size
9664ab8b7 wpa_supplicant: Refactor Radio Measurement Request handling
332bf5d3f wpa_supplicant: Validate RRM request frame format
ec493469f wpa_supplicant: Move RRM implementation to a dedicated file
d1c74f8c9 Add RRM definitions for beacon report measurement
6a31440b8 Fix LCI request subelement processing
ce691a8d9 Add CONFIG_MESH into wpa_supplicant defconfig
67129ab9e wpa_cli: Add commands to use PMKSA_GET/ADD
bbad185c1 P2P: Fix compilation warning in p2p_add_device()
2977f5193 GAS: Remove unnecessarily duplicate gas_frag_limit configuration
1940559ea FT: Drop FT Action frames if ft_over_ds=0
d8de90487 Remove deprecated tx_queue_* params from hostapd.conf notes
78022c836 Fix memory leak on hostapd eap_user_file parsing error paths
02f999c6d hostapd: Remove unnecessary NULL check from parser functions
fd5f29e7e Fix memory leak in hostapd BSS_TM_REQ error path handling
95de34a10 Remove trailing whitespace
45997cce4 hostapd: Add TERMINATE as per-interface command
546680f81 hostapd: Do not update dtim_period with invalid value
356773058 RADIUS server: Increase maximum number of sessions
a5861afcb hostapd: Do not update invalid wep_key_len_unicast
f78402ace hostapd: Do not update rejected wep_key_len_broadcast
e0ba7efe5 hostapd: Do not update eapol_version with rejected value
9266d00bf hostapd: Reject invalid macaddr_acl value
8628555f9 hostapd: Check driver parameter before replacing previous value
1dfd25a68 Fix hostapd SIGHUP processing before interface is enabled
34e29dfd4 Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call
65dfa8728 mka: Make MKA actor priority configurable
9bcfd5be8 Document new D-Bus WPS properties
77fcbf7ff D-Bus: Use a helper function to get possibly NULL strings
dbf524946 D-Bus: Add DeviceType in WPS property
266097fda D-Bus: Add device serial number in WPS property
3ee6a3ab3 D-Bus: Add model number in WPS property
ae66822cd D-Bus: Add WPS model name as property
318d4b5be D-Bus: Add WPS manufacturer as property
b20f031c6 D-Bus: Add WPS device name as property
4a45dc192 mesh: Show [MESH] flag in print_bss_info()
c04a67deb hostapd_cli: Add completion for get command
bf4167b9d hostapd_cli: Add completion for set command
86adff09e hostapd_cli: Completion for further commands with STA parameter
4f59ad069 hostapd_cli: Use common completion for commands that use stations
62b95eb67 hostapd_cli: Add missing command help descriptions
04f02faac Fix wpa_cipher_to_alg() return type
9187b13ad wpa_supplicant: Add BSS CURRENT control interface command
d7f12e4eb OpenSSL: Make sure local certificate auto chaining is enabled
4be02b71b OpenSSL: Remove SSL_{CTX_,}_clear_options ifdefs
7655bd738 P2P: Do not use wait_time for SD Response TX without fragmentation
1f0fdaf0e Fix race condition between AssocResp callback and 4addr event
a6f3761f7 eap_proxy: Add support for SIM state change indication from eap_proxy
79a54ab9f eap_proxy: Fix eap_proxy_init() prototype to use const eapol_cb
4e118c847 D-Bus: Add 'freq' option to P2P Find method to specify starting channel
e414f4f02 PeerKey: Fix STK 4-way handshake regression
28fb9bb19 PeerKey: Fix EAPOL-Key processing
dfc773172 Android: Add p2p_add_cli_chan=1 option
7508c2ad9 PAE: Make KaY specific details available via control interface
b54f43390 FILS: Make FILS Indication element information available in BSS output
8183aee6c FILS: Add support for building FILS Realm Information ANQP-element
9cad61867 FILS: Add Realm Information ANQP-element in BSS data
26bf70e3d FILS: Separate FILS realm configuration from ERP domain
42b847ac1 FILS: Fix hashed realm name derivation
29062f293 Update various definitions based on IEEE Std 802.11-2016
aaa9c60bc Fix preauth_test build by updating add_pmkid/remove_pmkid callbacks
0babae87a Fix wpa_supplicant build error with IEEE8021X_EAPOL unset
19810d29b Make Beacon IEs available in wpa_supplicant BSS command
274e76f22 mesh: Fix channel configuration in pri/sec switch case
cebda0e3e Make debug print clearer for AP/mesh mode secondary channel issues
3459381dd External persistent storage for PMKSA cache entries
c57931273 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant
655dc4a43 Send "TERMINATING" event from hostapd
5149a0f04 P2P: Set p2p_persistent_group=1 at the time of reading disabled=2
065c029a5 Remove MBO dependency from Supported Operating Classes element
62cd9d792 nl80211: Specify the BSSID in the QCA vendor scan
444930e5b Define an attribute to do a specific BSSID QCA vendor scan
cea761472 Add QCA vendor command definitions for IDs 61-73
cb0cc6efa Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands
c313c8a5d Fix QCA vendor command values for SAR power limits
a5c723adc Interworking: Clear SCANNING state if no network selected
a1836de64 SME: Fix IBSS setup after shared key/FT/FILS association
f49c852b5 P2P: Fix a theoretical out of bounds read in wpas_p2p_select_go_freq()
944d48588 P2P: Fix a theoretical out of bounds read in wpas_p2p_setup_freqs()
0a6c9dc70 P2P: Send P2P-DEVICE-FOUND event on peer changing device name
9a431d493 WFD: Clear wfd_subelems when P2P peer stops sending them
6e374bd44 Ignore scan results from ongoing scan when FLUSH command is issued
71ac93453 Make update_idx available in BSS control interface command
49aa88bb5 P2P: Clear PEER_WAITING_RESPONSE on GO Negotiation success
c79238b6a Define a QCA vendor command to configure SAR Power limits
0f5eb69f8 Use eloop timeout for post-EAP-Failure wait before disconnection
20b1a9e23 Allow hostapd wep_key# parameters to be cleared
5ec3d510e wpa_passphrase: Reject invalid passphrase
Test: Wifi Suite
Change-Id: Ida52ca4e43bbc326a89d4c9848529df2d545b692
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| d80a401aed31d06f261efd19223cf55d1a2a8228 |
|
06-Nov-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f10ff62e4eda7917a8e28fe492fd98723a5e97c4
f10ff62 Describe preferred mechanism for submitting contributions
fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
73ed03f wpa_supplicant: Add GTK RSC relaxation workaround
ea6030c Restore previous wpa_state in scan-only result handler
1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate
d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves
a34eace dbus: Remove unused dict helper functions
cdcb2d0 wpa_cli: Add support for vendor_elem_* commands
17b7032 EAP peer: Clear ignore flag in INITIALIZE state
1f1e619 Add test programs for checking libwpa_client linking
736b7cb wpa_supplicant/Makefile: Fix libwpa_client build
2e38079 TLS: Fix memory leak with multiple TLS server instances
7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending()
45c3e72 Add frequency to operating class determination for 5 GHz 100..140
e50c50d dbus: Expose interface globals via D-Bus properties
1aa0fb7 dbus: Pass property description to getters/setters
c93b7e1 RSN: Check result of EAPOL-Key frame send request
95be79f Allow -1 as value to disable frag_threshold
bc50bb0 Extend the range of values for the RTS threshold
053693d hostapd: Add feature to start all interfaces at the same time in sync
9578413 Reserve QCA vendor specific nl80211 commands 110..114
5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing
5d1d69a P2P: Filter control chars in group client device name similarly to peer
f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails
1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal
d8fd633 Do not write ERROR level log entries if debug file is not used
67deaa5 l2_packet: Add build option to disable Linux packet socket workaround
fa46426 RSN: Do not try to connect if PMF disabled and AP requires it
8acbe7f WNM: Verify WNM Sleep Mode element length
dacd789 WNM: Mark set TFS buffer const
...
f24b979 OpenSSL: Merge error returns
84d6a17 TLS: Remove unused tls_capabilities()
7867227 ms_funcs: Merge similar return cases
3596361 hw_features: Merge similar return case in check_40mhz_2g4()
aac1efe Reject the initial 4-way handshake if initial GTK setup fails
2da5256 Add backtrace-based error path testing mechanism
55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC
Next patches were skipped due to explicit cherry-pick:
bddc51e RSN: Stop connection attempt on apparent PMK mismatch
3fdaaa8 Throttle control interface event message bursts
a530fe7 Add wpa_supplicant EVENT_TEST control interface command
ee1e3f5 hostapd: Global control interface notifications
2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations
ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS
844dfeb QCA vendor command support to set band to driver
Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| af9da3180dc20f57df1fc1e1811f3df9fa9e6ab5 |
|
03-Apr-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 681278246232029c334117bd6dc7e74c6b179f96
6812782 hlr_auc_gw: Allow Milenage RES length to be reduced
4839f7c wpa_cli: Fix a typo in usage text
a20a361 wpa_supplicant: Clear blacklist on connect
0144ecb Android: wpa_ctrl missing include for sys/stat.h
0bb20ef HS 2.0R2: Allow user to specify spp.xsd file location
97c9991 HS 2.0R2: Add more debugging messages to hs20-osu-client
93c2e60 HS 2.0R2 CA: Improve setup.sh and .conf for more flexibility
02e122a Reschedule scan from wpas_stop_pno if it was postponed
80fd9c3 EAP-PEAP server: Add support for negotiating vendor for Phase 2
a867082 EAP peer: Use 32-bit EAP method type for Phase 2 processing
56dfc49 Fix a typo in configuration parameter documentation
c4b45c6 TLS: Fix memory leaks on tls_connection_set_params() error paths
af85191 Make tls_connection_get_keyblock_size() internal to tls_*.c
94f1fe6 Remove master key extraction from tls_connection_get_keys()
fa0e715 Use tls_connection_prf() for all EAP TLS-based key derivation
df8191d Rename HT 20/40 coex variable to be more descriptive
1d0f42a EAP server: Add debug prints to help asleap testing
2c1cf90 Add wpa_snprintf_hex_sep()
5955cfa ms_funcs: Make challenge_hash() non-static
Change-Id: I0f3e5e5170a61e458949a675641946d95598dc5d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| 6c0da2bb83f6915d8260912362692d1a742e057b |
|
05-Jan-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 8b48e3200680f71ae083b84793e6bdc2099416d2 [DO NOT MERGE]
8b48e32 wpa_cli: Add MAC address randomization in scan
fb37588 ctrl_iface: Add MAC address randomization in scan processing
56c76fa scan: Add MAC address randomization in scan handling
86056fe nl80211: Handle MAC address randomization in scan/sched_scan
ff23ed2 driver: Add definitions for MAC address randomization in scan
7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands
72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel
6b90dea TDLS: Propagate enable/disable channel-switch commands to driver
d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS
4daa572 TDLS: Add channel-switch capability flag
ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h
8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS
677e7a9 WMM AC: Do not fail on unknown IEs in Association Response
fecc2bb WMM AC: Delete tspecs on roaming
20fe745 WMM AC: Print user-priority in wmm_ac_status
730a0d1 nl80211: Always register management frames handler
...
209702d Add possibility to set the setband parameter
ee82e33 Do not trigger the scan during initialization on Android platforms
e69ae5f Reject new SCAN commands if there is a pending request
...
59d7148 nl80211: Provide subtype and reason code for AP SME drivers
9d4ff04 Add external EAPOL transmission option for testing purposes
61fc904 P2P: Handle improper WPS termination on GO during group formation
58b40fd P2P: Clear p2p_go_group_formation_completed on GO start
c155305 Complete sme-connect radio work when clearing connection state
debb2da P2P: Report group removal reason PSK_FAILURE in timeout case
51465a0 The master branch is now used for v2.4 development
Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| b36ed7cd946148d829f311de8fe53ea3ffaaffe3 |
|
17-Mar-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f4e3860f8a770a0db3816196c77baf894c7ccc1e
f4e3860 Fix AP mode default TXOP Limit values for AC_VI and AC_VO
47bd94a TLS testing: Add new test cases for RSA-DHE primes
f5bbb2f TLS client: Reject RSA-DHE prime if it shorter than 768 bits
817742f TLS testing: Fix test_flags check for ApplData report
1120e45 Allow config blobs to be set through ctrl_iface
c3722e1 ACS: Fix VHT20
49b7443 Fix HT40 co-ex scan for some pri/sec channel switches
5bdac4a Remove unused STA entry information
c9d9ee9 Fix hostapd_add_iface error path to deinit partially initialized BSS
6829da3 Fix external radio_work deinit path
8dd9f9c Allow management group cipher to be configured
67d39cf P2P: Do not create another group interface on NFC Token enable
6aa1cd4 wpa_supplicant: Apply VHT_OVERRIDES to wpas_start_assoc_cb()
db63757 hostapd: Supply default parameters for OBSS scan
6e9375e TDLS: Add get_capability tdls command
67e1a40 hostapd: For VHT 20/40, allow center segment 0 to be zero
d0bf06f GAS server: Remove incomplete remote ANQP processing
fdb4535 WPS: Extend per-station PSK to support ER case as well
9a1a538 wpa_supplicant AP: Allow PMF to be enabled with ieee80211w
ce6b9cd Allow reason code to be specified for DEAUTH/DISASSOC test frame
dda8be7 TDLS: Use QoS info from WMM IE obtained in TDLS frames
daa70bd Fix CONFIG_NO_SCAN_PROCESSING=y build
3a8ec73 P2P: Report dev_found event (if not yet done) from GO Neg Req RX
0f23a5e Mark AP disabled if initialization steps fail
Change-Id: I7e499241552147c734fec9b77351b47ffd6e3a7c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| 818ea489ef32dcdc7c098d8a336d6e1dd8996112 |
|
10-Mar-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 390b92913a9a1b3a6aaf70e8b5971a7b7c76cabc
390b929 TLS testing: Allow hostapd to be used as a TLS testing tool
994afe3 RADIUS server: Allow TLS implementation add log entries
01f7fe1 RADIUS server: Allow EAP methods to log into SQLite DB
8a57da7 RADIUS server: Add option for storing log information to SQLite DB
f3ef7a2 TLS client: Send decrypt_error on verify_data validation error
129b9b9 TLS: Share a helper function for verifying Signature
6531963 TLS: Use a helper function for calculating ServerKeyExchange hash
65074a2 TLS: Add support for DHE-RSA cipher suites
41ebfe9 TLS server: Enable SHA256-based cipher suites
60b893d wpa_supplicant: Allow external management frame processing for testing
ec33bc6 Enable RADIUS message dumps with excessive debug verbosity
226e357 Revert "bridge: Track inter-BSS usage"
d0ee16e Allow arbitrary RADIUS attributes to be added into Access-Accept
0ac3876 Fix PMF protect disconnection on session timeout
49021c1 Fix hostapd error path regression
Change-Id: Ie0710c036cca2fb370d28684cc5a5d28a075dfc1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| 9bce59c7fef20e34a05f04d1e33a4076083dca0c |
|
12-Sep-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 10-Sep-2012 TOT
commit 762b99db7a76803d1ad274e87caa6fe870d47441
Author: Jouni Malinen <j@w1.fi>
Date: Mon Sep 10 12:33:29 2012 +0200
Fix last_scan_res update existing BSS entry is update
Change-Id: I03f933bf6d7f7e36b0f8ac410fbc37990f127c18
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/tls/tlsv1_server.c
|