include/system/audio_effect.h

/*
 * Copyright (C) 2016 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */


#ifndef ANDROID_AUDIO_EFFECT_CORE_H
#define ANDROID_AUDIO_EFFECT_CORE_H

#include "audio.h"
#include "audio_effect-base.h"

__BEGIN_DECLS

/////////////////////////////////////////////////
//      Common Definitions
/////////////////////////////////////////////////

//
//--- Effect descriptor structure effect_descriptor_t
//

// This format is used for both "type" and "uuid" fields of the effect descriptor structure.
// - When used for effect type and the engine is implementing and effect corresponding to a standard
// OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface.
// - When used as uuid, it should be a unique UUID for this particular implementation.
typedef audio_uuid_t effect_uuid_t;

// Maximum length of character strings in structures defines by this API.
#define EFFECT_STRING_LEN_MAX 64

// NULL UUID definition (matches SL_IID_NULL_)
#define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \
                                  { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } }
static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER;
static const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_;
static const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210";

// The effect descriptor contains necessary information to facilitate the enumeration of the effect
// engines present in a library.
typedef struct effect_descriptor_s {
    effect_uuid_t type;     // UUID of to the OpenSL ES interface implemented by this effect
    effect_uuid_t uuid;     // UUID for this particular implementation
    uint32_t apiVersion;    // Version of the effect control API implemented
    uint32_t flags;         // effect engine capabilities/requirements flags (see below)
    uint16_t cpuLoad;       // CPU load indication (see below)
    uint16_t memoryUsage;   // Data Memory usage (see below)
    char    name[EFFECT_STRING_LEN_MAX];   // human readable effect name
    char    implementor[EFFECT_STRING_LEN_MAX];    // human readable effect implementor name
} effect_descriptor_t;

#define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | \
                           EFFECT_CONFIG_SMP_RATE | \
                           EFFECT_CONFIG_CHANNELS | \
                           EFFECT_CONFIG_FORMAT | \
                           EFFECT_CONFIG_ACC_MODE)

/////////////////////////////////////////////////
//      Effect control interface
/////////////////////////////////////////////////

//
//--- Standardized command codes for command() function
//
enum effect_command_e {
   EFFECT_CMD_INIT,                 // initialize effect engine
   EFFECT_CMD_SET_CONFIG,           // configure effect engine (see effect_config_t)
   EFFECT_CMD_RESET,                // reset effect engine
   EFFECT_CMD_ENABLE,               // enable effect process
   EFFECT_CMD_DISABLE,              // disable effect process
   EFFECT_CMD_SET_PARAM,            // set parameter immediately (see effect_param_t)
   EFFECT_CMD_SET_PARAM_DEFERRED,   // set parameter deferred
   EFFECT_CMD_SET_PARAM_COMMIT,     // commit previous set parameter deferred
   EFFECT_CMD_GET_PARAM,            // get parameter
   EFFECT_CMD_SET_DEVICE,           // set audio device (see audio.h, audio_devices_t)
   EFFECT_CMD_SET_VOLUME,           // set volume
   EFFECT_CMD_SET_AUDIO_MODE,       // set the audio mode (normal, ring, ...)
   EFFECT_CMD_SET_CONFIG_REVERSE,   // configure effect engine reverse stream(see effect_config_t)
   EFFECT_CMD_SET_INPUT_DEVICE,     // set capture device (see audio.h, audio_devices_t)
   EFFECT_CMD_GET_CONFIG,           // read effect engine configuration
   EFFECT_CMD_GET_CONFIG_REVERSE,   // read configure effect engine reverse stream configuration
   EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS,// get all supported configurations for a feature.
   EFFECT_CMD_GET_FEATURE_CONFIG,   // get current feature configuration
   EFFECT_CMD_SET_FEATURE_CONFIG,   // set current feature configuration
   EFFECT_CMD_SET_AUDIO_SOURCE,     // set the audio source (see audio.h, audio_source_t)
   EFFECT_CMD_OFFLOAD,              // set if effect thread is an offload one,
                                    // send the ioHandle of the effect thread
   EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code
};

//==================================================================================================
// command: EFFECT_CMD_INIT
//--------------------------------------------------------------------------------------------------
// description:
//  Initialize effect engine: All configurations return to default
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_SET_CONFIG
//--------------------------------------------------------------------------------------------------
// description:
//  Apply new audio parameters configurations for input and output buffers
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(effect_config_t)
//  data: effect_config_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_RESET
//--------------------------------------------------------------------------------------------------
// description:
//  Reset the effect engine. Keep configuration but resets state and buffer content
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 0
//  data: N/A
//==================================================================================================
// command: EFFECT_CMD_ENABLE
//--------------------------------------------------------------------------------------------------
// description:
//  Enable the process. Called by the framework before the first call to process()
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_DISABLE
//--------------------------------------------------------------------------------------------------
// description:
//  Disable the process. Called by the framework after the last call to process()
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_SET_PARAM
//--------------------------------------------------------------------------------------------------
// description:
//  Set a parameter and apply it immediately
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(effect_param_t) + size of param and value
//  data: effect_param_t + param + value. See effect_param_t definition below for value offset
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_SET_PARAM_DEFERRED
//--------------------------------------------------------------------------------------------------
// description:
//  Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(effect_param_t) + size of param and value
//  data: effect_param_t + param + value. See effect_param_t definition below for value offset
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 0
//  data: N/A
//==================================================================================================
// command: EFFECT_CMD_SET_PARAM_COMMIT
//--------------------------------------------------------------------------------------------------
// description:
//  Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_GET_PARAM
//--------------------------------------------------------------------------------------------------
// description:
//  Get a parameter value
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(effect_param_t) + size of param
//  data: effect_param_t + param
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(effect_param_t) + size of param and value
//  data: effect_param_t + param + value. See effect_param_t definition below for value offset
//==================================================================================================
// command: EFFECT_CMD_SET_DEVICE
//--------------------------------------------------------------------------------------------------
// description:
//  Set the rendering device the audio output path is connected to. See audio.h, audio_devices_t
//  for device values.
//  The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this
//  command when the device changes
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(uint32_t)
//  data: uint32_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 0
//  data: N/A
//==================================================================================================
// command: EFFECT_CMD_SET_VOLUME
//--------------------------------------------------------------------------------------------------
// description:
//  Set and get volume. Used by audio framework to delegate volume control to effect engine.
//  The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in
//  its descriptor to receive this command before every call to process() function
//  If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return
//  the volume that should be applied before the effect is processed. The overall volume (the volume
//  actually applied by the effect engine multiplied by the returned value) should match the value
//  indicated in the command.
//--------------------------------------------------------------------------------------------------
// command format:
//  size: n * sizeof(uint32_t)
//  data: volume for each channel defined in effect_config_t for output buffer expressed in
//      8.24 fixed point format
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: n * sizeof(uint32_t) / 0
//  data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor:
//              volume for each channel defined in effect_config_t for output buffer expressed in
//              8.24 fixed point format
//        - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor:
//              N/A
//  It is legal to receive a null pointer as pReplyData in which case the effect framework has
//  delegated volume control to another effect
//==================================================================================================
// command: EFFECT_CMD_SET_AUDIO_MODE
//--------------------------------------------------------------------------------------------------
// description:
//  Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its
//  descriptor to receive this command when the audio mode changes.
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(uint32_t)
//  data: audio_mode_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 0
//  data: N/A
//==================================================================================================
// command: EFFECT_CMD_SET_CONFIG_REVERSE
//--------------------------------------------------------------------------------------------------
// description:
//  Apply new audio parameters configurations for input and output buffers of reverse stream.
//  An example of reverse stream is the echo reference supplied to an Acoustic Echo Canceler.
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(effect_config_t)
//  data: effect_config_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(int)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_SET_INPUT_DEVICE
//--------------------------------------------------------------------------------------------------
// description:
//  Set the capture device the audio input path is connected to. See audio.h, audio_devices_t
//  for device values.
//  The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this
//  command when the device changes
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(uint32_t)
//  data: uint32_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 0
//  data: N/A
//==================================================================================================
// command: EFFECT_CMD_GET_CONFIG
//--------------------------------------------------------------------------------------------------
// description:
//  Read audio parameters configurations for input and output buffers
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(effect_config_t)
//  data: effect_config_t
//==================================================================================================
// command: EFFECT_CMD_GET_CONFIG_REVERSE
//--------------------------------------------------------------------------------------------------
// description:
//  Read audio parameters configurations for input and output buffers of reverse stream
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 0
//  data: N/A
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(effect_config_t)
//  data: effect_config_t
//==================================================================================================
// command: EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS
//--------------------------------------------------------------------------------------------------
// description:
//  Queries for supported configurations for a particular feature (e.g. get the supported
// combinations of main and auxiliary channels for a noise suppressor).
// The command parameter is the feature identifier (See effect_feature_e for a list of defined
// features) followed by the maximum number of configuration descriptor to return.
// The reply is composed of:
//  - status (uint32_t):
//          - 0 if feature is supported
//          - -ENOSYS if the feature is not supported,
//          - -ENOMEM if the feature is supported but the total number of supported configurations
//          exceeds the maximum number indicated by the caller.
//  - total number of supported configurations (uint32_t)
//  - an array of configuration descriptors.
// The actual number of descriptors returned must not exceed the maximum number indicated by
// the caller.
//--------------------------------------------------------------------------------------------------
// command format:
//  size: 2 x sizeof(uint32_t)
//  data: effect_feature_e + maximum number of configurations to return
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 2 x sizeof(uint32_t) + n x sizeof (<config descriptor>)
//  data: status + total number of configurations supported + array of n config descriptors
//==================================================================================================
// command: EFFECT_CMD_GET_FEATURE_CONFIG
//--------------------------------------------------------------------------------------------------
// description:
//  Retrieves current configuration for a given feature.
// The reply status is:
//      - 0 if feature is supported
//      - -ENOSYS if the feature is not supported,
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(uint32_t)
//  data: effect_feature_e
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(uint32_t) + sizeof (<config descriptor>)
//  data: status + config descriptor
//==================================================================================================
// command: EFFECT_CMD_SET_FEATURE_CONFIG
//--------------------------------------------------------------------------------------------------
// description:
//  Sets current configuration for a given feature.
// The reply status is:
//      - 0 if feature is supported
//      - -ENOSYS if the feature is not supported,
//      - -EINVAL if the configuration is invalid
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(uint32_t) + sizeof (<config descriptor>)
//  data: effect_feature_e + config descriptor
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(uint32_t)
//  data: status
//==================================================================================================
// command: EFFECT_CMD_SET_AUDIO_SOURCE
//--------------------------------------------------------------------------------------------------
// description:
//  Set the audio source the capture path is configured for (Camcorder, voice recognition...).
//  See audio.h, audio_source_t for values.
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(uint32_t)
//  data: uint32_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: 0
//  data: N/A
//==================================================================================================
// command: EFFECT_CMD_OFFLOAD
//--------------------------------------------------------------------------------------------------
// description:
//  1.indicate if the playback thread the effect is attached to is offloaded or not
//  2.update the io handle of the playback thread the effect is attached to
//--------------------------------------------------------------------------------------------------
// command format:
//  size: sizeof(effect_offload_param_t)
//  data: effect_offload_param_t
//--------------------------------------------------------------------------------------------------
// reply format:
//  size: sizeof(uint32_t)
//  data: uint32_t
//--------------------------------------------------------------------------------------------------
// command: EFFECT_CMD_FIRST_PROPRIETARY
//--------------------------------------------------------------------------------------------------
// description:
//  All proprietary effect commands must use command codes above this value. The size and format of
//  command and response fields is free in this case
//==================================================================================================

// Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t
// structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with
// regard to the channel mask definition in audio.h, audio_channel_mask_t e.g :
// Stereo: left, right
// 5 point 1: front left, front right, front center, low frequency, back left, back right
// The buffer size is expressed in frame count, a frame being composed of samples for all
// channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by
// definition
typedef struct audio_buffer_s {
    size_t   frameCount;        // number of frames in buffer
    union {
        void*       raw;        // raw pointer to start of buffer
        float*      f32;        // pointer to float 32 bit data at start of buffer
        int32_t*    s32;        // pointer to signed 32 bit data at start of buffer
        int16_t*    s16;        // pointer to signed 16 bit data at start of buffer
        uint8_t*    u8;         // pointer to unsigned 8 bit data at start of buffer
    };
} audio_buffer_t;

// The buffer_provider_s structure contains functions that can be used
// by the effect engine process() function to query and release input
// or output audio buffer.
// The getBuffer() function is called to retrieve a buffer where data
// should read from or written to by process() function.
// The releaseBuffer() function MUST be called when the buffer retrieved
// with getBuffer() is not needed anymore.
// The process function should use the buffer provider mechanism to retrieve
// input or output buffer if the inBuffer or outBuffer passed as argument is NULL
// and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_SET_CONFIG
// command did not specify an audio buffer.

typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer);

typedef struct buffer_provider_s {
    buffer_function_t getBuffer;       // retrieve next buffer
    buffer_function_t releaseBuffer;   // release used buffer
    void       *cookie;                // for use by client of buffer provider functions
} buffer_provider_t;

// The buffer_config_s structure specifies the input or output audio format
// to be used by the effect engine.
typedef struct buffer_config_s {
    audio_buffer_t  buffer;     // buffer for use by process() function if not passed explicitly
    uint32_t   samplingRate;    // sampling rate
    uint32_t   channels;        // channel mask (see audio_channel_mask_t in audio.h)
    buffer_provider_t bufferProvider;   // buffer provider
    uint8_t    format;          // Audio format (see audio_format_t in audio.h)
    uint8_t    accessMode;      // read/write or accumulate in buffer (effect_buffer_access_e)
    uint16_t   mask;            // indicates which of the above fields is valid
} buffer_config_t;

// EFFECT_FEATURE_AUX_CHANNELS feature configuration descriptor. Describe a combination
// of main and auxiliary channels supported
typedef struct channel_config_s {
    audio_channel_mask_t main_channels; // channel mask for main channels
    audio_channel_mask_t aux_channels;  // channel mask for auxiliary channels
} channel_config_t;


// effect_config_s structure is used to configure audio parameters and buffers for effect engine
// input and output.
typedef struct effect_config_s {
    buffer_config_t   inputCfg;
    buffer_config_t   outputCfg;
} effect_config_t;


// effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM
// command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command.
// psize and vsize represent the actual size of parameter and value.
//
// NOTE: the start of value field inside the data field is always on a 32 bit boundary:
//
//  +-----------+
//  | status    | sizeof(int)
//  +-----------+
//  | psize     | sizeof(int)
//  +-----------+
//  | vsize     | sizeof(int)
//  +-----------+
//  |           |   |           |
//  ~ parameter ~   > psize     |
//  |           |   |           >  ((psize - 1)/sizeof(int) + 1) * sizeof(int)
//  +-----------+               |
//  | padding   |               |
//  +-----------+
//  |           |   |
//  ~ value     ~   > vsize
//  |           |   |
//  +-----------+

typedef struct effect_param_s {
    int32_t     status;     // Transaction status (unused for command, used for reply)
    uint32_t    psize;      // Parameter size
    uint32_t    vsize;      // Value size
    char        data[];     // Start of Parameter + Value data
} effect_param_t;

// Maximum effect_param_t size
#define EFFECT_PARAM_SIZE_MAX       65536

// structure used by EFFECT_CMD_OFFLOAD command
typedef struct effect_offload_param_s {
    bool isOffload;         // true if the playback thread the effect is attached to is offloaded
    int ioHandle;           // io handle of the playback thread the effect is attached to
} effect_offload_param_t;


__END_DECLS

#endif  // ANDROID_AUDIO_EFFECT_CORE_H