1/* 2 * wm9081.c -- WM9081 ALSA SoC Audio driver 3 * 4 * Author: Mark Brown 5 * 6 * Copyright 2009 Wolfson Microelectronics plc 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 */ 13 14#include <linux/module.h> 15#include <linux/moduleparam.h> 16#include <linux/init.h> 17#include <linux/delay.h> 18#include <linux/device.h> 19#include <linux/pm.h> 20#include <linux/i2c.h> 21#include <linux/platform_device.h> 22#include <linux/slab.h> 23#include <sound/core.h> 24#include <sound/pcm.h> 25#include <sound/pcm_params.h> 26#include <sound/soc.h> 27#include <sound/initval.h> 28#include <sound/tlv.h> 29 30#include <sound/wm9081.h> 31#include "wm9081.h" 32 33static u16 wm9081_reg_defaults[] = { 34 0x0000, /* R0 - Software Reset */ 35 0x0000, /* R1 */ 36 0x00B9, /* R2 - Analogue Lineout */ 37 0x00B9, /* R3 - Analogue Speaker PGA */ 38 0x0001, /* R4 - VMID Control */ 39 0x0068, /* R5 - Bias Control 1 */ 40 0x0000, /* R6 */ 41 0x0000, /* R7 - Analogue Mixer */ 42 0x0000, /* R8 - Anti Pop Control */ 43 0x01DB, /* R9 - Analogue Speaker 1 */ 44 0x0018, /* R10 - Analogue Speaker 2 */ 45 0x0180, /* R11 - Power Management */ 46 0x0000, /* R12 - Clock Control 1 */ 47 0x0038, /* R13 - Clock Control 2 */ 48 0x4000, /* R14 - Clock Control 3 */ 49 0x0000, /* R15 */ 50 0x0000, /* R16 - FLL Control 1 */ 51 0x0200, /* R17 - FLL Control 2 */ 52 0x0000, /* R18 - FLL Control 3 */ 53 0x0204, /* R19 - FLL Control 4 */ 54 0x0000, /* R20 - FLL Control 5 */ 55 0x0000, /* R21 */ 56 0x0000, /* R22 - Audio Interface 1 */ 57 0x0002, /* R23 - Audio Interface 2 */ 58 0x0008, /* R24 - Audio Interface 3 */ 59 0x0022, /* R25 - Audio Interface 4 */ 60 0x0000, /* R26 - Interrupt Status */ 61 0x0006, /* R27 - Interrupt Status Mask */ 62 0x0000, /* R28 - Interrupt Polarity */ 63 0x0000, /* R29 - Interrupt Control */ 64 0x00C0, /* R30 - DAC Digital 1 */ 65 0x0008, /* R31 - DAC Digital 2 */ 66 0x09AF, /* R32 - DRC 1 */ 67 0x4201, /* R33 - DRC 2 */ 68 0x0000, /* R34 - DRC 3 */ 69 0x0000, /* R35 - DRC 4 */ 70 0x0000, /* R36 */ 71 0x0000, /* R37 */ 72 0x0000, /* R38 - Write Sequencer 1 */ 73 0x0000, /* R39 - Write Sequencer 2 */ 74 0x0002, /* R40 - MW Slave 1 */ 75 0x0000, /* R41 */ 76 0x0000, /* R42 - EQ 1 */ 77 0x0000, /* R43 - EQ 2 */ 78 0x0FCA, /* R44 - EQ 3 */ 79 0x0400, /* R45 - EQ 4 */ 80 0x00B8, /* R46 - EQ 5 */ 81 0x1EB5, /* R47 - EQ 6 */ 82 0xF145, /* R48 - EQ 7 */ 83 0x0B75, /* R49 - EQ 8 */ 84 0x01C5, /* R50 - EQ 9 */ 85 0x169E, /* R51 - EQ 10 */ 86 0xF829, /* R52 - EQ 11 */ 87 0x07AD, /* R53 - EQ 12 */ 88 0x1103, /* R54 - EQ 13 */ 89 0x1C58, /* R55 - EQ 14 */ 90 0xF373, /* R56 - EQ 15 */ 91 0x0A54, /* R57 - EQ 16 */ 92 0x0558, /* R58 - EQ 17 */ 93 0x0564, /* R59 - EQ 18 */ 94 0x0559, /* R60 - EQ 19 */ 95 0x4000, /* R61 - EQ 20 */ 96}; 97 98static struct { 99 int ratio; 100 int clk_sys_rate; 101} clk_sys_rates[] = { 102 { 64, 0 }, 103 { 128, 1 }, 104 { 192, 2 }, 105 { 256, 3 }, 106 { 384, 4 }, 107 { 512, 5 }, 108 { 768, 6 }, 109 { 1024, 7 }, 110 { 1408, 8 }, 111 { 1536, 9 }, 112}; 113 114static struct { 115 int rate; 116 int sample_rate; 117} sample_rates[] = { 118 { 8000, 0 }, 119 { 11025, 1 }, 120 { 12000, 2 }, 121 { 16000, 3 }, 122 { 22050, 4 }, 123 { 24000, 5 }, 124 { 32000, 6 }, 125 { 44100, 7 }, 126 { 48000, 8 }, 127 { 88200, 9 }, 128 { 96000, 10 }, 129}; 130 131static struct { 132 int div; /* *10 due to .5s */ 133 int bclk_div; 134} bclk_divs[] = { 135 { 10, 0 }, 136 { 15, 1 }, 137 { 20, 2 }, 138 { 30, 3 }, 139 { 40, 4 }, 140 { 50, 5 }, 141 { 55, 6 }, 142 { 60, 7 }, 143 { 80, 8 }, 144 { 100, 9 }, 145 { 110, 10 }, 146 { 120, 11 }, 147 { 160, 12 }, 148 { 200, 13 }, 149 { 220, 14 }, 150 { 240, 15 }, 151 { 250, 16 }, 152 { 300, 17 }, 153 { 320, 18 }, 154 { 440, 19 }, 155 { 480, 20 }, 156}; 157 158struct wm9081_priv { 159 enum snd_soc_control_type control_type; 160 void *control_data; 161 int sysclk_source; 162 int mclk_rate; 163 int sysclk_rate; 164 int fs; 165 int bclk; 166 int master; 167 int fll_fref; 168 int fll_fout; 169 int tdm_width; 170 struct wm9081_pdata pdata; 171}; 172 173static int wm9081_volatile_register(struct snd_soc_codec *codec, unsigned int reg) 174{ 175 switch (reg) { 176 case WM9081_SOFTWARE_RESET: 177 return 1; 178 default: 179 return 0; 180 } 181} 182 183static int wm9081_reset(struct snd_soc_codec *codec) 184{ 185 return snd_soc_write(codec, WM9081_SOFTWARE_RESET, 0); 186} 187 188static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0); 189static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0); 190static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); 191static unsigned int drc_max_tlv[] = { 192 TLV_DB_RANGE_HEAD(4), 193 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0), 194 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0), 195 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), 196 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), 197}; 198static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0); 199static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0); 200 201static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); 202 203static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0); 204static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1); 205static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); 206 207static const char *drc_high_text[] = { 208 "1", 209 "1/2", 210 "1/4", 211 "1/8", 212 "1/16", 213 "0", 214}; 215 216static const struct soc_enum drc_high = 217 SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text); 218 219static const char *drc_low_text[] = { 220 "1", 221 "1/2", 222 "1/4", 223 "1/8", 224 "0", 225}; 226 227static const struct soc_enum drc_low = 228 SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text); 229 230static const char *drc_atk_text[] = { 231 "181us", 232 "181us", 233 "363us", 234 "726us", 235 "1.45ms", 236 "2.9ms", 237 "5.8ms", 238 "11.6ms", 239 "23.2ms", 240 "46.4ms", 241 "92.8ms", 242 "185.6ms", 243}; 244 245static const struct soc_enum drc_atk = 246 SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text); 247 248static const char *drc_dcy_text[] = { 249 "186ms", 250 "372ms", 251 "743ms", 252 "1.49s", 253 "2.97s", 254 "5.94s", 255 "11.89s", 256 "23.78s", 257 "47.56s", 258}; 259 260static const struct soc_enum drc_dcy = 261 SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text); 262 263static const char *drc_qr_dcy_text[] = { 264 "0.725ms", 265 "1.45ms", 266 "5.8ms", 267}; 268 269static const struct soc_enum drc_qr_dcy = 270 SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text); 271 272static const char *dac_deemph_text[] = { 273 "None", 274 "32kHz", 275 "44.1kHz", 276 "48kHz", 277}; 278 279static const struct soc_enum dac_deemph = 280 SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text); 281 282static const char *speaker_mode_text[] = { 283 "Class D", 284 "Class AB", 285}; 286 287static const struct soc_enum speaker_mode = 288 SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text); 289 290static int speaker_mode_get(struct snd_kcontrol *kcontrol, 291 struct snd_ctl_elem_value *ucontrol) 292{ 293 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); 294 unsigned int reg; 295 296 reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2); 297 if (reg & WM9081_SPK_MODE) 298 ucontrol->value.integer.value[0] = 1; 299 else 300 ucontrol->value.integer.value[0] = 0; 301 302 return 0; 303} 304 305/* 306 * Stop any attempts to change speaker mode while the speaker is enabled. 307 * 308 * We also have some special anti-pop controls dependent on speaker 309 * mode which must be changed along with the mode. 310 */ 311static int speaker_mode_put(struct snd_kcontrol *kcontrol, 312 struct snd_ctl_elem_value *ucontrol) 313{ 314 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); 315 unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT); 316 unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2); 317 318 /* Are we changing anything? */ 319 if (ucontrol->value.integer.value[0] == 320 ((reg2 & WM9081_SPK_MODE) != 0)) 321 return 0; 322 323 /* Don't try to change modes while enabled */ 324 if (reg_pwr & WM9081_SPK_ENA) 325 return -EINVAL; 326 327 if (ucontrol->value.integer.value[0]) { 328 /* Class AB */ 329 reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL); 330 reg2 |= WM9081_SPK_MODE; 331 } else { 332 /* Class D */ 333 reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL; 334 reg2 &= ~WM9081_SPK_MODE; 335 } 336 337 snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2); 338 339 return 0; 340} 341 342static const struct snd_kcontrol_new wm9081_snd_controls[] = { 343SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv), 344SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv), 345 346SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv), 347 348SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1), 349SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0), 350SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv), 351 352SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0), 353SOC_ENUM("DRC High Slope", drc_high), 354SOC_ENUM("DRC Low Slope", drc_low), 355SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv), 356SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv), 357SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv), 358SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv), 359SOC_ENUM("DRC Attack", drc_atk), 360SOC_ENUM("DRC Decay", drc_dcy), 361SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0), 362SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv), 363SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy), 364SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv), 365 366SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0), 367 368SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0), 369SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0), 370SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1), 371SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0), 372SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0, 373 out_tlv), 374SOC_ENUM("DAC Deemphasis", dac_deemph), 375SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put), 376}; 377 378static const struct snd_kcontrol_new wm9081_eq_controls[] = { 379SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv), 380SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv), 381SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv), 382SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv), 383SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv), 384}; 385 386static const struct snd_kcontrol_new mixer[] = { 387SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0), 388SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0), 389SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0), 390}; 391 392struct _fll_div { 393 u16 fll_fratio; 394 u16 fll_outdiv; 395 u16 fll_clk_ref_div; 396 u16 n; 397 u16 k; 398}; 399 400/* The size in bits of the FLL divide multiplied by 10 401 * to allow rounding later */ 402#define FIXED_FLL_SIZE ((1 << 16) * 10) 403 404static struct { 405 unsigned int min; 406 unsigned int max; 407 u16 fll_fratio; 408 int ratio; 409} fll_fratios[] = { 410 { 0, 64000, 4, 16 }, 411 { 64000, 128000, 3, 8 }, 412 { 128000, 256000, 2, 4 }, 413 { 256000, 1000000, 1, 2 }, 414 { 1000000, 13500000, 0, 1 }, 415}; 416 417static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, 418 unsigned int Fout) 419{ 420 u64 Kpart; 421 unsigned int K, Ndiv, Nmod, target; 422 unsigned int div; 423 int i; 424 425 /* Fref must be <=13.5MHz */ 426 div = 1; 427 while ((Fref / div) > 13500000) { 428 div *= 2; 429 430 if (div > 8) { 431 pr_err("Can't scale %dMHz input down to <=13.5MHz\n", 432 Fref); 433 return -EINVAL; 434 } 435 } 436 fll_div->fll_clk_ref_div = div / 2; 437 438 pr_debug("Fref=%u Fout=%u\n", Fref, Fout); 439 440 /* Apply the division for our remaining calculations */ 441 Fref /= div; 442 443 /* Fvco should be 90-100MHz; don't check the upper bound */ 444 div = 0; 445 target = Fout * 2; 446 while (target < 90000000) { 447 div++; 448 target *= 2; 449 if (div > 7) { 450 pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", 451 Fout); 452 return -EINVAL; 453 } 454 } 455 fll_div->fll_outdiv = div; 456 457 pr_debug("Fvco=%dHz\n", target); 458 459 /* Find an appropriate FLL_FRATIO and factor it out of the target */ 460 for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { 461 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { 462 fll_div->fll_fratio = fll_fratios[i].fll_fratio; 463 target /= fll_fratios[i].ratio; 464 break; 465 } 466 } 467 if (i == ARRAY_SIZE(fll_fratios)) { 468 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); 469 return -EINVAL; 470 } 471 472 /* Now, calculate N.K */ 473 Ndiv = target / Fref; 474 475 fll_div->n = Ndiv; 476 Nmod = target % Fref; 477 pr_debug("Nmod=%d\n", Nmod); 478 479 /* Calculate fractional part - scale up so we can round. */ 480 Kpart = FIXED_FLL_SIZE * (long long)Nmod; 481 482 do_div(Kpart, Fref); 483 484 K = Kpart & 0xFFFFFFFF; 485 486 if ((K % 10) >= 5) 487 K += 5; 488 489 /* Move down to proper range now rounding is done */ 490 fll_div->k = K / 10; 491 492 pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n", 493 fll_div->n, fll_div->k, 494 fll_div->fll_fratio, fll_div->fll_outdiv, 495 fll_div->fll_clk_ref_div); 496 497 return 0; 498} 499 500static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id, 501 unsigned int Fref, unsigned int Fout) 502{ 503 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 504 u16 reg1, reg4, reg5; 505 struct _fll_div fll_div; 506 int ret; 507 int clk_sys_reg; 508 509 /* Any change? */ 510 if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout) 511 return 0; 512 513 /* Disable the FLL */ 514 if (Fout == 0) { 515 dev_dbg(codec->dev, "FLL disabled\n"); 516 wm9081->fll_fref = 0; 517 wm9081->fll_fout = 0; 518 519 return 0; 520 } 521 522 ret = fll_factors(&fll_div, Fref, Fout); 523 if (ret != 0) 524 return ret; 525 526 reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5); 527 reg5 &= ~WM9081_FLL_CLK_SRC_MASK; 528 529 switch (fll_id) { 530 case WM9081_SYSCLK_FLL_MCLK: 531 reg5 |= 0x1; 532 break; 533 534 default: 535 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id); 536 return -EINVAL; 537 } 538 539 /* Disable CLK_SYS while we reconfigure */ 540 clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3); 541 if (clk_sys_reg & WM9081_CLK_SYS_ENA) 542 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, 543 clk_sys_reg & ~WM9081_CLK_SYS_ENA); 544 545 /* Any FLL configuration change requires that the FLL be 546 * disabled first. */ 547 reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1); 548 reg1 &= ~WM9081_FLL_ENA; 549 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1); 550 551 /* Apply the configuration */ 552 if (fll_div.k) 553 reg1 |= WM9081_FLL_FRAC_MASK; 554 else 555 reg1 &= ~WM9081_FLL_FRAC_MASK; 556 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1); 557 558 snd_soc_write(codec, WM9081_FLL_CONTROL_2, 559 (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) | 560 (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT)); 561 snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k); 562 563 reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4); 564 reg4 &= ~WM9081_FLL_N_MASK; 565 reg4 |= fll_div.n << WM9081_FLL_N_SHIFT; 566 snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4); 567 568 reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK; 569 reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT; 570 snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5); 571 572 /* Set gain to the recommended value */ 573 snd_soc_update_bits(codec, WM9081_FLL_CONTROL_4, 574 WM9081_FLL_GAIN_MASK, 0); 575 576 /* Enable the FLL */ 577 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA); 578 579 /* Then bring CLK_SYS up again if it was disabled */ 580 if (clk_sys_reg & WM9081_CLK_SYS_ENA) 581 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg); 582 583 dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); 584 585 wm9081->fll_fref = Fref; 586 wm9081->fll_fout = Fout; 587 588 return 0; 589} 590 591static int configure_clock(struct snd_soc_codec *codec) 592{ 593 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 594 int new_sysclk, i, target; 595 unsigned int reg; 596 int ret = 0; 597 int mclkdiv = 0; 598 int fll = 0; 599 600 switch (wm9081->sysclk_source) { 601 case WM9081_SYSCLK_MCLK: 602 if (wm9081->mclk_rate > 12225000) { 603 mclkdiv = 1; 604 wm9081->sysclk_rate = wm9081->mclk_rate / 2; 605 } else { 606 wm9081->sysclk_rate = wm9081->mclk_rate; 607 } 608 wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0); 609 break; 610 611 case WM9081_SYSCLK_FLL_MCLK: 612 /* If we have a sample rate calculate a CLK_SYS that 613 * gives us a suitable DAC configuration, plus BCLK. 614 * Ideally we would check to see if we can clock 615 * directly from MCLK and only use the FLL if this is 616 * not the case, though care must be taken with free 617 * running mode. 618 */ 619 if (wm9081->master && wm9081->bclk) { 620 /* Make sure we can generate CLK_SYS and BCLK 621 * and that we've got 3MHz for optimal 622 * performance. */ 623 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { 624 target = wm9081->fs * clk_sys_rates[i].ratio; 625 new_sysclk = target; 626 if (target >= wm9081->bclk && 627 target > 3000000) 628 break; 629 } 630 631 if (i == ARRAY_SIZE(clk_sys_rates)) 632 return -EINVAL; 633 634 } else if (wm9081->fs) { 635 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { 636 new_sysclk = clk_sys_rates[i].ratio 637 * wm9081->fs; 638 if (new_sysclk > 3000000) 639 break; 640 } 641 642 if (i == ARRAY_SIZE(clk_sys_rates)) 643 return -EINVAL; 644 645 } else { 646 new_sysclk = 12288000; 647 } 648 649 ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 650 wm9081->mclk_rate, new_sysclk); 651 if (ret == 0) { 652 wm9081->sysclk_rate = new_sysclk; 653 654 /* Switch SYSCLK over to FLL */ 655 fll = 1; 656 } else { 657 wm9081->sysclk_rate = wm9081->mclk_rate; 658 } 659 break; 660 661 default: 662 return -EINVAL; 663 } 664 665 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1); 666 if (mclkdiv) 667 reg |= WM9081_MCLKDIV2; 668 else 669 reg &= ~WM9081_MCLKDIV2; 670 snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg); 671 672 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3); 673 if (fll) 674 reg |= WM9081_CLK_SRC_SEL; 675 else 676 reg &= ~WM9081_CLK_SRC_SEL; 677 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg); 678 679 dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate); 680 681 return ret; 682} 683 684static int clk_sys_event(struct snd_soc_dapm_widget *w, 685 struct snd_kcontrol *kcontrol, int event) 686{ 687 struct snd_soc_codec *codec = w->codec; 688 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 689 690 /* This should be done on init() for bypass paths */ 691 switch (wm9081->sysclk_source) { 692 case WM9081_SYSCLK_MCLK: 693 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate); 694 break; 695 case WM9081_SYSCLK_FLL_MCLK: 696 dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n", 697 wm9081->mclk_rate); 698 break; 699 default: 700 dev_err(codec->dev, "System clock not configured\n"); 701 return -EINVAL; 702 } 703 704 switch (event) { 705 case SND_SOC_DAPM_PRE_PMU: 706 configure_clock(codec); 707 break; 708 709 case SND_SOC_DAPM_POST_PMD: 710 /* Disable the FLL if it's running */ 711 wm9081_set_fll(codec, 0, 0, 0); 712 break; 713 } 714 715 return 0; 716} 717 718static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = { 719SND_SOC_DAPM_INPUT("IN1"), 720SND_SOC_DAPM_INPUT("IN2"), 721 722SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0), 723 724SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0, 725 mixer, ARRAY_SIZE(mixer)), 726 727SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0), 728 729SND_SOC_DAPM_PGA("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0), 730SND_SOC_DAPM_PGA("Speaker", WM9081_POWER_MANAGEMENT, 1, 0, NULL, 0), 731 732SND_SOC_DAPM_OUTPUT("LINEOUT"), 733SND_SOC_DAPM_OUTPUT("SPKN"), 734SND_SOC_DAPM_OUTPUT("SPKP"), 735 736SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event, 737 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), 738SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0), 739SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0), 740}; 741 742 743static const struct snd_soc_dapm_route wm9081_audio_paths[] = { 744 { "DAC", NULL, "CLK_SYS" }, 745 { "DAC", NULL, "CLK_DSP" }, 746 747 { "Mixer", "IN1 Switch", "IN1" }, 748 { "Mixer", "IN2 Switch", "IN2" }, 749 { "Mixer", "Playback Switch", "DAC" }, 750 751 { "LINEOUT PGA", NULL, "Mixer" }, 752 { "LINEOUT PGA", NULL, "TOCLK" }, 753 { "LINEOUT PGA", NULL, "CLK_SYS" }, 754 755 { "LINEOUT", NULL, "LINEOUT PGA" }, 756 757 { "Speaker PGA", NULL, "Mixer" }, 758 { "Speaker PGA", NULL, "TOCLK" }, 759 { "Speaker PGA", NULL, "CLK_SYS" }, 760 761 { "Speaker", NULL, "Speaker PGA" }, 762 763 { "SPKN", NULL, "Speaker" }, 764 { "SPKP", NULL, "Speaker" }, 765}; 766 767static int wm9081_set_bias_level(struct snd_soc_codec *codec, 768 enum snd_soc_bias_level level) 769{ 770 u16 reg; 771 772 switch (level) { 773 case SND_SOC_BIAS_ON: 774 break; 775 776 case SND_SOC_BIAS_PREPARE: 777 /* VMID=2*40k */ 778 reg = snd_soc_read(codec, WM9081_VMID_CONTROL); 779 reg &= ~WM9081_VMID_SEL_MASK; 780 reg |= 0x2; 781 snd_soc_write(codec, WM9081_VMID_CONTROL, reg); 782 783 /* Normal bias current */ 784 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); 785 reg &= ~WM9081_STBY_BIAS_ENA; 786 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); 787 break; 788 789 case SND_SOC_BIAS_STANDBY: 790 /* Initial cold start */ 791 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { 792 /* Disable LINEOUT discharge */ 793 reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL); 794 reg &= ~WM9081_LINEOUT_DISCH; 795 snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg); 796 797 /* Select startup bias source */ 798 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); 799 reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA; 800 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); 801 802 /* VMID 2*4k; Soft VMID ramp enable */ 803 reg = snd_soc_read(codec, WM9081_VMID_CONTROL); 804 reg |= WM9081_VMID_RAMP | 0x6; 805 snd_soc_write(codec, WM9081_VMID_CONTROL, reg); 806 807 mdelay(100); 808 809 /* Normal bias enable & soft start off */ 810 reg |= WM9081_BIAS_ENA; 811 reg &= ~WM9081_VMID_RAMP; 812 snd_soc_write(codec, WM9081_VMID_CONTROL, reg); 813 814 /* Standard bias source */ 815 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); 816 reg &= ~WM9081_BIAS_SRC; 817 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); 818 } 819 820 /* VMID 2*240k */ 821 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); 822 reg &= ~WM9081_VMID_SEL_MASK; 823 reg |= 0x40; 824 snd_soc_write(codec, WM9081_VMID_CONTROL, reg); 825 826 /* Standby bias current on */ 827 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); 828 reg |= WM9081_STBY_BIAS_ENA; 829 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); 830 break; 831 832 case SND_SOC_BIAS_OFF: 833 /* Startup bias source */ 834 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); 835 reg |= WM9081_BIAS_SRC; 836 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); 837 838 /* Disable VMID and biases with soft ramping */ 839 reg = snd_soc_read(codec, WM9081_VMID_CONTROL); 840 reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA); 841 reg |= WM9081_VMID_RAMP; 842 snd_soc_write(codec, WM9081_VMID_CONTROL, reg); 843 844 /* Actively discharge LINEOUT */ 845 reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL); 846 reg |= WM9081_LINEOUT_DISCH; 847 snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg); 848 break; 849 } 850 851 codec->dapm.bias_level = level; 852 853 return 0; 854} 855 856static int wm9081_set_dai_fmt(struct snd_soc_dai *dai, 857 unsigned int fmt) 858{ 859 struct snd_soc_codec *codec = dai->codec; 860 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 861 unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2); 862 863 aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV | 864 WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK); 865 866 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 867 case SND_SOC_DAIFMT_CBS_CFS: 868 wm9081->master = 0; 869 break; 870 case SND_SOC_DAIFMT_CBS_CFM: 871 aif2 |= WM9081_LRCLK_DIR; 872 wm9081->master = 1; 873 break; 874 case SND_SOC_DAIFMT_CBM_CFS: 875 aif2 |= WM9081_BCLK_DIR; 876 wm9081->master = 1; 877 break; 878 case SND_SOC_DAIFMT_CBM_CFM: 879 aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR; 880 wm9081->master = 1; 881 break; 882 default: 883 return -EINVAL; 884 } 885 886 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 887 case SND_SOC_DAIFMT_DSP_B: 888 aif2 |= WM9081_AIF_LRCLK_INV; 889 case SND_SOC_DAIFMT_DSP_A: 890 aif2 |= 0x3; 891 break; 892 case SND_SOC_DAIFMT_I2S: 893 aif2 |= 0x2; 894 break; 895 case SND_SOC_DAIFMT_RIGHT_J: 896 break; 897 case SND_SOC_DAIFMT_LEFT_J: 898 aif2 |= 0x1; 899 break; 900 default: 901 return -EINVAL; 902 } 903 904 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 905 case SND_SOC_DAIFMT_DSP_A: 906 case SND_SOC_DAIFMT_DSP_B: 907 /* frame inversion not valid for DSP modes */ 908 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 909 case SND_SOC_DAIFMT_NB_NF: 910 break; 911 case SND_SOC_DAIFMT_IB_NF: 912 aif2 |= WM9081_AIF_BCLK_INV; 913 break; 914 default: 915 return -EINVAL; 916 } 917 break; 918 919 case SND_SOC_DAIFMT_I2S: 920 case SND_SOC_DAIFMT_RIGHT_J: 921 case SND_SOC_DAIFMT_LEFT_J: 922 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 923 case SND_SOC_DAIFMT_NB_NF: 924 break; 925 case SND_SOC_DAIFMT_IB_IF: 926 aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV; 927 break; 928 case SND_SOC_DAIFMT_IB_NF: 929 aif2 |= WM9081_AIF_BCLK_INV; 930 break; 931 case SND_SOC_DAIFMT_NB_IF: 932 aif2 |= WM9081_AIF_LRCLK_INV; 933 break; 934 default: 935 return -EINVAL; 936 } 937 break; 938 default: 939 return -EINVAL; 940 } 941 942 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); 943 944 return 0; 945} 946 947static int wm9081_hw_params(struct snd_pcm_substream *substream, 948 struct snd_pcm_hw_params *params, 949 struct snd_soc_dai *dai) 950{ 951 struct snd_soc_codec *codec = dai->codec; 952 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 953 int ret, i, best, best_val, cur_val; 954 unsigned int clk_ctrl2, aif1, aif2, aif3, aif4; 955 956 clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2); 957 clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK); 958 959 aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1); 960 961 aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2); 962 aif2 &= ~WM9081_AIF_WL_MASK; 963 964 aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3); 965 aif3 &= ~WM9081_BCLK_DIV_MASK; 966 967 aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4); 968 aif4 &= ~WM9081_LRCLK_RATE_MASK; 969 970 wm9081->fs = params_rate(params); 971 972 if (wm9081->tdm_width) { 973 /* If TDM is set up then that fixes our BCLK. */ 974 int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >> 975 WM9081_AIFDAC_TDM_MODE_SHIFT) + 1; 976 977 wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots; 978 } else { 979 /* Otherwise work out a BCLK from the sample size */ 980 wm9081->bclk = 2 * wm9081->fs; 981 982 switch (params_format(params)) { 983 case SNDRV_PCM_FORMAT_S16_LE: 984 wm9081->bclk *= 16; 985 break; 986 case SNDRV_PCM_FORMAT_S20_3LE: 987 wm9081->bclk *= 20; 988 aif2 |= 0x4; 989 break; 990 case SNDRV_PCM_FORMAT_S24_LE: 991 wm9081->bclk *= 24; 992 aif2 |= 0x8; 993 break; 994 case SNDRV_PCM_FORMAT_S32_LE: 995 wm9081->bclk *= 32; 996 aif2 |= 0xc; 997 break; 998 default: 999 return -EINVAL; 1000 } 1001 } 1002 1003 dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk); 1004 1005 ret = configure_clock(codec); 1006 if (ret != 0) 1007 return ret; 1008 1009 /* Select nearest CLK_SYS_RATE */ 1010 best = 0; 1011 best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio) 1012 - wm9081->fs); 1013 for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) { 1014 cur_val = abs((wm9081->sysclk_rate / 1015 clk_sys_rates[i].ratio) - wm9081->fs); 1016 if (cur_val < best_val) { 1017 best = i; 1018 best_val = cur_val; 1019 } 1020 } 1021 dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n", 1022 clk_sys_rates[best].ratio); 1023 clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate 1024 << WM9081_CLK_SYS_RATE_SHIFT); 1025 1026 /* SAMPLE_RATE */ 1027 best = 0; 1028 best_val = abs(wm9081->fs - sample_rates[0].rate); 1029 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { 1030 /* Closest match */ 1031 cur_val = abs(wm9081->fs - sample_rates[i].rate); 1032 if (cur_val < best_val) { 1033 best = i; 1034 best_val = cur_val; 1035 } 1036 } 1037 dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n", 1038 sample_rates[best].rate); 1039 clk_ctrl2 |= (sample_rates[best].sample_rate 1040 << WM9081_SAMPLE_RATE_SHIFT); 1041 1042 /* BCLK_DIV */ 1043 best = 0; 1044 best_val = INT_MAX; 1045 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { 1046 cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div) 1047 - wm9081->bclk; 1048 if (cur_val < 0) /* Table is sorted */ 1049 break; 1050 if (cur_val < best_val) { 1051 best = i; 1052 best_val = cur_val; 1053 } 1054 } 1055 wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div; 1056 dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n", 1057 bclk_divs[best].div, wm9081->bclk); 1058 aif3 |= bclk_divs[best].bclk_div; 1059 1060 /* LRCLK is a simple fraction of BCLK */ 1061 dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs); 1062 aif4 |= wm9081->bclk / wm9081->fs; 1063 1064 /* Apply a ReTune Mobile configuration if it's in use */ 1065 if (wm9081->pdata.num_retune_configs) { 1066 struct wm9081_pdata *pdata = &wm9081->pdata; 1067 struct wm9081_retune_mobile_setting *s; 1068 int eq1; 1069 1070 best = 0; 1071 best_val = abs(pdata->retune_configs[0].rate - wm9081->fs); 1072 for (i = 0; i < pdata->num_retune_configs; i++) { 1073 cur_val = abs(pdata->retune_configs[i].rate - 1074 wm9081->fs); 1075 if (cur_val < best_val) { 1076 best_val = cur_val; 1077 best = i; 1078 } 1079 } 1080 s = &pdata->retune_configs[best]; 1081 1082 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n", 1083 s->name, s->rate); 1084 1085 /* If the EQ is enabled then disable it while we write out */ 1086 eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA; 1087 if (eq1 & WM9081_EQ_ENA) 1088 snd_soc_write(codec, WM9081_EQ_1, 0); 1089 1090 /* Write out the other values */ 1091 for (i = 1; i < ARRAY_SIZE(s->config); i++) 1092 snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]); 1093 1094 eq1 |= (s->config[0] & ~WM9081_EQ_ENA); 1095 snd_soc_write(codec, WM9081_EQ_1, eq1); 1096 } 1097 1098 snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2); 1099 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); 1100 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3); 1101 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4); 1102 1103 return 0; 1104} 1105 1106static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute) 1107{ 1108 struct snd_soc_codec *codec = codec_dai->codec; 1109 unsigned int reg; 1110 1111 reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2); 1112 1113 if (mute) 1114 reg |= WM9081_DAC_MUTE; 1115 else 1116 reg &= ~WM9081_DAC_MUTE; 1117 1118 snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg); 1119 1120 return 0; 1121} 1122 1123static int wm9081_set_sysclk(struct snd_soc_codec *codec, 1124 int clk_id, unsigned int freq, int dir) 1125{ 1126 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1127 1128 switch (clk_id) { 1129 case WM9081_SYSCLK_MCLK: 1130 case WM9081_SYSCLK_FLL_MCLK: 1131 wm9081->sysclk_source = clk_id; 1132 wm9081->mclk_rate = freq; 1133 break; 1134 1135 default: 1136 return -EINVAL; 1137 } 1138 1139 return 0; 1140} 1141 1142static int wm9081_set_tdm_slot(struct snd_soc_dai *dai, 1143 unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) 1144{ 1145 struct snd_soc_codec *codec = dai->codec; 1146 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1147 unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1); 1148 1149 aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK); 1150 1151 if (slots < 0 || slots > 4) 1152 return -EINVAL; 1153 1154 wm9081->tdm_width = slot_width; 1155 1156 if (slots == 0) 1157 slots = 1; 1158 1159 aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT; 1160 1161 switch (rx_mask) { 1162 case 1: 1163 break; 1164 case 2: 1165 aif1 |= 0x10; 1166 break; 1167 case 4: 1168 aif1 |= 0x20; 1169 break; 1170 case 8: 1171 aif1 |= 0x30; 1172 break; 1173 default: 1174 return -EINVAL; 1175 } 1176 1177 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1); 1178 1179 return 0; 1180} 1181 1182#define WM9081_RATES SNDRV_PCM_RATE_8000_96000 1183 1184#define WM9081_FORMATS \ 1185 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ 1186 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) 1187 1188static struct snd_soc_dai_ops wm9081_dai_ops = { 1189 .hw_params = wm9081_hw_params, 1190 .set_fmt = wm9081_set_dai_fmt, 1191 .digital_mute = wm9081_digital_mute, 1192 .set_tdm_slot = wm9081_set_tdm_slot, 1193}; 1194 1195/* We report two channels because the CODEC processes a stereo signal, even 1196 * though it is only capable of handling a mono output. 1197 */ 1198static struct snd_soc_dai_driver wm9081_dai = { 1199 .name = "wm9081-hifi", 1200 .playback = { 1201 .stream_name = "HiFi Playback", 1202 .channels_min = 1, 1203 .channels_max = 2, 1204 .rates = WM9081_RATES, 1205 .formats = WM9081_FORMATS, 1206 }, 1207 .ops = &wm9081_dai_ops, 1208}; 1209 1210static int wm9081_probe(struct snd_soc_codec *codec) 1211{ 1212 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec); 1213 int ret; 1214 u16 reg; 1215 1216 codec->control_data = wm9081->control_data; 1217 ret = snd_soc_codec_set_cache_io(codec, 8, 16, wm9081->control_type); 1218 if (ret != 0) { 1219 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); 1220 return ret; 1221 } 1222 1223 reg = snd_soc_read(codec, WM9081_SOFTWARE_RESET); 1224 if (reg != 0x9081) { 1225 dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg); 1226 ret = -EINVAL; 1227 return ret; 1228 } 1229 1230 ret = wm9081_reset(codec); 1231 if (ret < 0) { 1232 dev_err(codec->dev, "Failed to issue reset\n"); 1233 return ret; 1234 } 1235 1236 reg = 0; 1237 if (wm9081->pdata.irq_high) 1238 reg |= WM9081_IRQ_POL; 1239 if (!wm9081->pdata.irq_cmos) 1240 reg |= WM9081_IRQ_OP_CTRL; 1241 snd_soc_update_bits(codec, WM9081_INTERRUPT_CONTROL, 1242 WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg); 1243 1244 wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); 1245 1246 /* Enable zero cross by default */ 1247 reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT); 1248 snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC); 1249 reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA); 1250 snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA, 1251 reg | WM9081_SPKPGAZC); 1252 1253 snd_soc_add_controls(codec, wm9081_snd_controls, 1254 ARRAY_SIZE(wm9081_snd_controls)); 1255 if (!wm9081->pdata.num_retune_configs) { 1256 dev_dbg(codec->dev, 1257 "No ReTune Mobile data, using normal EQ\n"); 1258 snd_soc_add_controls(codec, wm9081_eq_controls, 1259 ARRAY_SIZE(wm9081_eq_controls)); 1260 } 1261 1262 return ret; 1263} 1264 1265static int wm9081_remove(struct snd_soc_codec *codec) 1266{ 1267 wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF); 1268 return 0; 1269} 1270 1271#ifdef CONFIG_PM 1272static int wm9081_suspend(struct snd_soc_codec *codec, pm_message_t state) 1273{ 1274 wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF); 1275 1276 return 0; 1277} 1278 1279static int wm9081_resume(struct snd_soc_codec *codec) 1280{ 1281 u16 *reg_cache = codec->reg_cache; 1282 int i; 1283 1284 for (i = 0; i < codec->driver->reg_cache_size; i++) { 1285 if (i == WM9081_SOFTWARE_RESET) 1286 continue; 1287 1288 snd_soc_write(codec, i, reg_cache[i]); 1289 } 1290 1291 wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); 1292 1293 return 0; 1294} 1295#else 1296#define wm9081_suspend NULL 1297#define wm9081_resume NULL 1298#endif 1299 1300static struct snd_soc_codec_driver soc_codec_dev_wm9081 = { 1301 .probe = wm9081_probe, 1302 .remove = wm9081_remove, 1303 .suspend = wm9081_suspend, 1304 .resume = wm9081_resume, 1305 1306 .set_sysclk = wm9081_set_sysclk, 1307 .set_bias_level = wm9081_set_bias_level, 1308 1309 .reg_cache_size = ARRAY_SIZE(wm9081_reg_defaults), 1310 .reg_word_size = sizeof(u16), 1311 .reg_cache_default = wm9081_reg_defaults, 1312 .volatile_register = wm9081_volatile_register, 1313 1314 .dapm_widgets = wm9081_dapm_widgets, 1315 .num_dapm_widgets = ARRAY_SIZE(wm9081_dapm_widgets), 1316 .dapm_routes = wm9081_audio_paths, 1317 .num_dapm_routes = ARRAY_SIZE(wm9081_audio_paths), 1318}; 1319 1320#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) 1321static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, 1322 const struct i2c_device_id *id) 1323{ 1324 struct wm9081_priv *wm9081; 1325 int ret; 1326 1327 wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL); 1328 if (wm9081 == NULL) 1329 return -ENOMEM; 1330 1331 i2c_set_clientdata(i2c, wm9081); 1332 wm9081->control_type = SND_SOC_I2C; 1333 wm9081->control_data = i2c; 1334 1335 if (dev_get_platdata(&i2c->dev)) 1336 memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev), 1337 sizeof(wm9081->pdata)); 1338 1339 ret = snd_soc_register_codec(&i2c->dev, 1340 &soc_codec_dev_wm9081, &wm9081_dai, 1); 1341 if (ret < 0) 1342 kfree(wm9081); 1343 return ret; 1344} 1345 1346static __devexit int wm9081_i2c_remove(struct i2c_client *client) 1347{ 1348 snd_soc_unregister_codec(&client->dev); 1349 kfree(i2c_get_clientdata(client)); 1350 return 0; 1351} 1352 1353static const struct i2c_device_id wm9081_i2c_id[] = { 1354 { "wm9081", 0 }, 1355 { } 1356}; 1357MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id); 1358 1359static struct i2c_driver wm9081_i2c_driver = { 1360 .driver = { 1361 .name = "wm9081", 1362 .owner = THIS_MODULE, 1363 }, 1364 .probe = wm9081_i2c_probe, 1365 .remove = __devexit_p(wm9081_i2c_remove), 1366 .id_table = wm9081_i2c_id, 1367}; 1368#endif 1369 1370static int __init wm9081_modinit(void) 1371{ 1372 int ret = 0; 1373#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) 1374 ret = i2c_add_driver(&wm9081_i2c_driver); 1375 if (ret != 0) { 1376 printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n", 1377 ret); 1378 } 1379#endif 1380 return ret; 1381} 1382module_init(wm9081_modinit); 1383 1384static void __exit wm9081_exit(void) 1385{ 1386#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) 1387 i2c_del_driver(&wm9081_i2c_driver); 1388#endif 1389} 1390module_exit(wm9081_exit); 1391 1392 1393MODULE_DESCRIPTION("ASoC WM9081 driver"); 1394MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 1395MODULE_LICENSE("GPL"); 1396