40aad3c1a9b63a044bdae25be26fa0daaf676622 |
|
11-Dec-2013 |
Grant Likely <grant.likely@linaro.org> |
dt/bindings: Remove all references to device_type "ethernet-phy" The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
f706bed1144e0fdad2b583549fc366afd4a1e9f1 |
|
28-Nov-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/fsl: update compatiable on fsl 16550 uart nodes The Freescale serial port's are pretty much a 16550, however there are some FSL specific bugs and features. Add a "fsl,ns16550" compatiable string to allow code to handle those FSL specific issues. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
07c638398f490e63275ae23aa51b7c50df7d1a49 |
|
21-Jul-2010 |
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> |
powerpc/tqm85xx: update PCI interrupt-map attribute Update PCI IRQ mapping on TQM85xx platforms: include INTC and INTD on PCI-X slot and add INTA/INTB mapping for PCMCIA bridge. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
b1b680258618dee231a4136cdef5e1903c090817 |
|
08-May-2009 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/fsl: Removed reg property from 85xx/86xx soc node Between the addition of the ecm/mcm law nodes and the fact that the get_immrbase() has been using the range property of the SoC to determine the base address of CCSR space we no longer need the reg property at the soc node level. It has been ill specified and varied between device trees to cover either the {e,m}cm-law node, some odd subset of CCSR space or all of CCSR space. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
e1a228973646bfa09575423cf5c40b3d0f40d670 |
|
22-Apr-2009 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systems Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
28eac2b74cc7136dee3f2615167811d24d25bc97 |
|
15-Apr-2009 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/fsl: Remove cell-index from PCI nodes The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
6467cae318ba8adaab37a82e8dd8af60ca9ed6e4 |
|
16-Mar-2009 |
Wolfgang Grandegger <wg@grandegger.com> |
powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes Commit 0f73a449a649acfca91404a98a35353a618b9555 added I2C device nodes for the LM75 thermal sensor on the TQM85xx modules, unfortunately with the wrong I2C address. The LM75s are located at address 0x48. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
fe671772ab1bf5624f2c4dbe2295e6ebeb8055fc |
|
31-Mar-2009 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Use fsl,mpc85.. as prefix for memory ctrl & l2-cache nodes Older devices tree's used "fsl,85.." instead of the preferred "fsl,mpc85.." for the memory controller & l2 cache controller nodes. The EDAC code is the only use of these and has been updated for some time to support both "fsl,85.." and "fsl,mpc85.." Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
84ba4a5899e613a396c5bea5feadba923534801b |
|
19-Mar-2009 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
0f73a449a649acfca91404a98a35353a618b9555 |
|
29-Jan-2009 |
Wolfgang Grandegger <wg@grandegger.com> |
powerpc/85xx: TQM85xx - add i2c device nodes for LM75 Automatic I2C device probing is not done any more. Therefore we need proper DTS device node definitions for the I2C LM75 thermal sensor on the TQM85xx modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 |
|
17-Dec-2008 |
Andy Fleming <afleming@freescale.com> |
gianfar: Convert gianfar to an of_platform_driver Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
3fd44736db9a5bf33e4a216b9cd43c9cfd57c459 |
|
09-Jul-2008 |
Kim Phillips <kim.phillips@freescale.com> |
powerpc/fsl: update crypto node definition and device tree instances delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
dee805532a30183c4462305b4614e58bd83a7bc1 |
|
27-Jun-2008 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc: Add dma nodes to 83xx, 85xx and 86xx boards Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
4fb035f69e3d08506b65d33b97be1b0e78af39a2 |
|
06-Jun-2008 |
Wolfgang Grandegger <wg@grandegger.com> |
powerpc/85xx: correct vendor prefix in DTS files for TQM85xx modules Like for the TQM5200, the vendor prefix "tqc," is now used for all TQM85xx modules from TQ-Components GmbH (http://www.tqc.de) in the corresponding DTS files. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
c054065bc10a7ee2bcf78b5bc95f4b4d9bdc923a |
|
30-May-2008 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] 85xx: Add next-level-cache property Added next-level-cache to the L1 and a reference to the new L2 label. This is per the ePAPR 0.94 spec. Since we are't really dependent on this today we aren't supporting the "legacy" l2-cache phandle that is specified in the PPC v2.1 OF Binding spec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
acd4b715ec83e451990bb82bdbf28ecaeab1b67d |
|
30-May-2008 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Cleanup mpic nodes in .dts Removed clock-frequency, big-endian, and built-in props as they aren't specified anywhere. Also added compatible = "chrp,open-pic" in the places it was missing. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
f67be814ff8e862422739cb424ce8c4e6c142c28 |
|
25-Jan-2008 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx * "simple-bus" covers all our needs for of_platform_bus_probe() * make device tree name just 'soc' not 'soc85..' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
0052bc5d5c3adc4ee4ba567470aebe775fcf2006 |
|
25-Jan-2008 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] 85xx: Port TQM85xx boards over from arch/ppc Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|