| ae3a197e3d0bfe3f4bf1693723e82dc018c096f3 |
|
28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PowerPC.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: linuxppc-dev@lists.ozlabs.org
|
| e55d7f737d3daf4aaf41945c1829138c608662e9 |
|
22-Dec-2011 |
Kyle Moffett <Kyle.D.Moffett@boeing.com> |
powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flag
There are two separate flags controlling whether or not the MPIC is
reset during initialization, which is completely unnecessary, and only
one of them can be specified in the device tree.
Also, most platforms in-tree right now do actually want to reset the
MPIC during initialization anyways, which means lots of duplicate code
passing the MPIC_WANTS_RESET flag.
Fix all of the callers which currently do not pass the MPIC_WANTS_RESET
flag to pass the MPIC_NO_RESET flag, then remove the MPIC_WANTS_RESET
flag and make the code reset the MPIC by default.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
| 5019609fce965dbdc66a7d947385fe92ca522231 |
|
22-Dec-2011 |
Kyle Moffett <Kyle.D.Moffett@boeing.com> |
powerpc/mpic: Remove MPIC_BROKEN_FRR_NIRQS and duplicate irq_count
The mpic->irq_count variable is only used as a software error-checking
limit to determine whether or not an IRQ number is valid. In board code
which does not manually specify an IRQ count to mpic_alloc(), i.e. 0, it
is automatically detected from the number of ISUs and the ISU size.
In practice, all hardware ends up with irq_count == num_sources, so all
of the runtime checks on mpic->irq_count should just check the value of
mpic->num_sources instead.
When platform hardware does not correctly report the number of IRQs,
which only happens on the MPC85xx/MPC86xx, the MPIC_BROKEN_FRR_NIRQS
flag is used to override the detected value of num_sources with the
manual irq_count parameter. Since there's no need to manually specify
the number of IRQs except in this case, the extra flag can be eliminated
and the test changed to "irq_count != 0".
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
| be8bec56dfac0574c4c08a50cd37e09bea941e3f |
|
02-Dec-2011 |
Kyle Moffett <Kyle.D.Moffett@boeing.com> |
powerpc/mpic: Invert the meaning of MPIC_PRIMARY
It turns out that there are only 2 in-tree platforms which use MPICs
which are not "primary": IBM Cell and PowerMac. To reduce the
complexity of the typical board setup code, invert the MPIC_PRIMARY bit
into MPIC_SECONDARY.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
| 996983b75cebb1bc1c2c545f20336f24ebfa17af |
|
02-Dec-2011 |
Kyle Moffett <Kyle.D.Moffett@boeing.com> |
powerpc/mpic: Search for open-pic device-tree node if NULL
Almost all PowerPC platforms use a standard "open-pic" device node so
the mpic_alloc() function now accepts NULL for the device-node. This
will cause it to perform a default search with of_find_matching_node().
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
| e7a98675caf272a11dc1012c7a8c6c00cab09f5b |
|
02-Dec-2011 |
Kyle Moffett <Kyle.D.Moffett@boeing.com> |
powerpc/mpic: Save computed phys_addr for board-specific code
The MPIC code can already perform an automatic OF address translation
step as part of mpic_alloc(), but several boards need to use that base
address when they perform mpic_assign_isu().
The easiest solution is to save the computed physical address into the
"struct mpic" for later use by the board code.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
| 7dfe293cf66258c5ef5d010f75d1f843b38e5e4a |
|
27-May-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
powerpc: Fix up modules that should be including module.h
So that we can clean up the header files and not be relying
on implicit includes from device.h ---> module.h
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
| ec775d0e70eb6b7116406b3441cb8501c2849dd2 |
|
25-Mar-2011 |
Thomas Gleixner <tglx@linutronix.de> |
powerpc: Convert to new irq_* function names
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 0161dca52d950676d727336cef1441ea2bcfba98 |
|
24-Sep-2008 |
Becky Bruce <becky.bruce@freescale.com> |
powerpc: Drop redundant machine type print in show_cpuinfo
For many of the embedded boards, "model" and "Machine" are printing
the same thing; remove the redundant code and allow the generic
show_cpuinfo to print the model information.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
| e48b1b452ff630288c930fd8e0c2d808bc15f7ad |
|
28-Mar-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
[POWERPC] Replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 1d59483aecb5bc80bdd677a46e77515a733c1a6f |
|
23-Jan-2008 |
Jon Loeliger <jdl@jdl.com> |
[POWERPC] Add _nmask_and_or_msr() declartion to asm-powerpc/system.h
Prevents miscellaneous users from declaring it locally.
Signed-off-by: Jon Loeliger <jdl@freecale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
| c9438affcb7ac0dda4c6c6961637fb272f7c32d4 |
|
04-Oct-2007 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Use for_each_ matching routinues for pci PHBs
On the Freescale embedded (83xx, 85xx, 86xx) and a few of the discrete
bridges (mpc10x, tsi108) use the new for_each_compatible_node() or
for_each_node_by_type() to provide more exact matching when looking for
PHBs in the device tree.
With the previous code it was possible to match on pci bridges since
we were only matching on device_type.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
| ed16c20da6f500bc2dfad933078d2987636a7b60 |
|
17-Aug-2007 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Remove old includes from arch/ppc
Remove includes of files that existed in arch/ppc that we dont need in
arch/powerpc anymore. The following includes were removed:
<asm/amigappc.h>
<asm/bootinfo.h>
<asm/ppcboot.h>
<asm/ppc_sys.h>
<asm/residual.h>
<asm/m8260_pci.h>
This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be
needed and thus removed.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
| 33567a023e734b640c27fc9cc4e7c6b45987b083 |
|
01-Aug-2007 |
Gabriel C <nix.or.die@googlemail.com> |
[POWERPC] Typo fixes interrrupt -> interrupt
This fixes some interrrupt -> interrupt typos.
Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 7d52c7b0cd46f42ae2c9df37f1a385d9aaf95842 |
|
22-Jun-2007 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Pass the pci_controller into pci_exclude_device
There are times that we need to know which controller we are on to decide
how to exclude devices properly. We now pass the pci_controller that we
are going to use down to the pci_exclude_device function. This will
greatly simplify being able to exclude the PHBs in multiple controller
setups.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
| 3dfaa762b59743719f00f2dc2f559de59f5502f7 |
|
18-Jun-2007 |
Arnd Bergmann <arnd@arndb.de> |
[POWERPC] kill isa_{io,mem}_base definitions for !PCI
When CONFIG_PCI is disabled, the definitions for isa_io_base,
isa_mem_base and pci_dram_offset are entirely unused, but they
can result in link failure because they are defined in multiple
places.
The easiest fix is to just remove all these definitions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| 05ad6a9159401804c9bcec8922a9c4a1cb2bfb59 |
|
07-May-2007 |
Josh Boyer <jwboyer@linux.vnet.ibm.com> |
[POWERPC] Generalize tsi108 PCI setup
Generalize tsi108_setup_pci to take the config space physical address and
primary bus designator as a parameter.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 08390db07a012b972189629a30eb695cdcb0ec14 |
|
07-May-2007 |
Josh Boyer <jwboyer@linux.vnet.ibm.com> |
[POWERPC] Add tsi108_pci.h for common PCI functions
Add a header file for the common PCI routines used for the TSI bridge
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 6bfeccdc110a4f92e44d51d67b274977392cbf46 |
|
15-Mar-2007 |
Zang Roy-r61911 <tie-fei.zang@freescale.com> |
[POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platforms
Remove loops_per_jiffy early initialization code for 7448HPC2 platforms.
Since udelay no longer uses loops_per_jiffy it is not necessary to
initialize it early.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| e2eb63927bfcb54232163bfec32440246fd44457 |
|
03-Apr-2007 |
Stephen Rothwell <sfr@canb.auug.org.au> |
[POWERPC] Rename get_property to of_get_property: arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 8545cd201134860b1eb72578419f5cbd4c0789c0 |
|
23-Mar-2007 |
Olaf Hering <olaf@aepfle.de> |
[POWERPC] Remove unused inclusion of linux/ide.h
Remove unneeded inclusion of linux/ide.h
It does not compile with CONFIG_BLOCK=n.
Remove asm/ide.h from ksyms file, it gets included earlier via
linux/ide.h.
Compile tested with all defconfig files.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 6406063899cc6f558df1e751d46de2e3c45c2189 |
|
06-Mar-2007 |
Zang Roy-r61911 <tie-fei.zang@freescale.com> |
[POWERPC] Remove fixed setting of ROOT_DEV for 7448HPC2 platforms
Remove fixed setting of ROOT_DEV for 7448HPC2 platforms.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 5873c9bdb05e9cc68ff4c45a192032a61f705067 |
|
14-Nov-2006 |
Zang Roy-r61911 <tie-fei.zang@freescale.com> |
[POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 board
The following patch adds a tsi108/9 pci interrupt controller host.
On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the
pci_read_irq_line be the default pci irq fixup.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| f90bb153b1493719d18b4529a46ebfe43220ea6c |
|
11-Nov-2006 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Make pci_read_irq_line the default
This patch reworks the way IRQs are fixed up on PCI for arch powerpc.
It makes pci_read_irq_line() called by default in the PCI code for
devices that are probed, and add an optional per-device fixup in
ppc_md for platforms that really need to correct what they obtain
from pci_read_irq_line().
It also removes ppc_md.irq_bus_setup which was only used by pSeries
and should not be needed anymore.
I've also removed the pSeries s7a workaround as it can't work with
the current interrupt code anyway. I'm trying to get one of these
machines working so I can test a proper fix for that problem.
I also haven't updated the old-style fixup code from 85xx_cds.c
because it's actually buggy :) It assigns pci_dev->irq hard coded
numbers which is no good with the new IRQ mapping code. It should
at least use irq_create_mapping(NULL, hard_coded_number); and possibly
also set_irq_type() to set them as level low.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 35a84c2f56e0f77ea2c5a4327b17104705f4c8c7 |
|
07-Oct-2006 |
Olaf Hering <olaf@aepfle.de> |
[POWERPC] Fix up after irq changes
Remove struct pt_regs * from all handlers.
Also remove the regs argument from get_irq() functions.
Compile tested with arch/powerpc/config/* and
arch/ppc/configs/prep_defconfig
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 038b0a6d8d32db934bba6a24e74e76e4e327a94f |
|
04-Oct-2006 |
Dave Jones <davej@redhat.com> |
Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.
Signed-off-by: Dave Jones <davej@redhat.com>
|
| 7233593b7844c2db930594ee9c0c872a6900bfcc |
|
25-Aug-2006 |
Zang Roy-r61911 <tie-fei.zang@freescale.com> |
[POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2
This adds a new hardware information table for mpic. This enables
the mpic code to deal with mpic controllers with different register
layouts and hardware behaviours.
This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic
controllers, select CONFIG_MPIC_WEIRD and add its hardware information
in the mpic_infos[] array.
TSI108/109 PIC takes the first index of weird hardware information
table. :) The table can be extended. The Tsi108/109 PIC looks like
standard OpenPIC but, in fact, is different in register mapping and
behavior.
The patch does not affect the behavior of standard mpic. If
CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to
the current code.
[benh@kernel.crashing.org:
This patch is a slightly cleaned up version of Zang Roy's support for
the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new
version of the type macros and changes the way MPIC is selected in
Kconfig to better match what is done for other system devices.
]
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| c4342ff92bed26f2e0e3543a9f0fdc5f3a29b8fd |
|
23-Aug-2006 |
Zang Roy-r61911 <tie-fei.zang@freescale.com> |
[POWERPC] Update mpc7448hpc2 board irq support using device tree
The patch rewrites mpc7448hpc2 board irq support according to the new
mpic device tree interface.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 8efca49329a50710d656a8bb78d6f0f0e2f48a26 |
|
12-Jul-2006 |
Jeremy Kerr <jk@ozlabs.org> |
[POWERPC] mpc: Constify & voidify get_property()
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.
mpc* platform changes.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| c5d56332fd6c2f0c7cf9d1f65416076f2711ea28 |
|
13-Jun-2006 |
Zang Roy-r61911 <tie-fei.zang@freescale.com> |
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform
Add support for Freescale mpc7448 (Taiga) board support
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|