| cad5cef62a5a0c525d39118d2e94b6e2034d5e05 |
|
21-Dec-2012 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
POWERPC: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8ee9d85779356c1dc2ba87aca27fbf9414f2d82b |
|
29-Nov-2007 |
Olof Johansson <olof@lixom.net> |
pasemi: DMA engine management library
pasemi: DMA engine management library
Introduce a DMA management library to manage the various DMA resources
on the PA Semi SoCs. Since several drivers need to allocate these shared
resources, provide some abstractions as well as allocation/free functions
for channels, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
| 8b32bc03256c82a6a4fcb3c2520b54469b74ec82 |
|
07-Nov-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: Don't enter powersaving states from elevated astates
When the PWRficient cpus are entered into powersavings states, the
astate is automatically dropped down to 0. While we still restore it
when we come out of idle, it can still cause some weird effects with
respect to performance (especially since it takes a while to ramp up to
higher astates).
So, to avoid this, don't enter power savings when the cpufreq driver
(or user) has set higher astates than 0.
The restore is still required, since there's a chance the astate has
been raised from the other cpu while the idling one was asleep.
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| 3850169dbddcc9e53fd550eb093af7da5dfcefa9 |
|
04-Sep-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: Move pasemi_idle_init() to late_initcall()
Move pasemi_idle_init() to be a late_initcall instead of being called from
setup_arch(). This way the cpufreq driver has a chance to initialize and
save away the boot time astate before we go to idle for the first time.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 68c8404c742fdda2151b4bf6bd98419bf8118481 |
|
04-Sep-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: Add pasemi_pci_getcfgaddr()
Add pasemi_pci_getcfgaddr(), to get the remapped address of a specific
config register for a PCI device.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 2e0c3370b3ecf831ef209f1094df36a808865845 |
|
27-Apr-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: Cpufreq driver
Cpufreq driver for PA Semi PWRficient processors.
Signed-off-by: Egor Martovetsky <egor@pasemi.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 31c56d820e03a2fd47f81d6c826f92caf511f9ee |
|
04-Feb-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: iommu support
I/O TLB support for PA6T-1682M.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| f9fba5b72dbedc691dcb10ae666ec03f279b07f4 |
|
04-Feb-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: Configure DMA controller interrupts
The DMA controller on PWRficient is somewhat special -- has a PCI header
so it looks like it's on the root PCI (-Express) root bus, but it uses
more than the default number of interrupts (and they are hardwired).
We need to wire up all interrupts for the DMA controller. The generic
IRQ code will only map the primary interrupt from the PCI header (128),
so add 129->211 by hand.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 1199919b69ff9559a3d3444fb5eb45b7cc48264d |
|
04-Feb-2007 |
Olof Johansson <olof@lixom.net> |
[POWERPC] pasemi: Idle loops
Powersave support on PA6T. Right now it only uses 'doze' mode, and
will default to no savings (spin).
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| f90bb153b1493719d18b4529a46ebfe43220ea6c |
|
11-Nov-2006 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Make pci_read_irq_line the default
This patch reworks the way IRQs are fixed up on PCI for arch powerpc.
It makes pci_read_irq_line() called by default in the PCI code for
devices that are probed, and add an optional per-device fixup in
ppc_md for platforms that really need to correct what they obtain
from pci_read_irq_line().
It also removes ppc_md.irq_bus_setup which was only used by pSeries
and should not be needed anymore.
I've also removed the pSeries s7a workaround as it can't work with
the current interrupt code anyway. I'm trying to get one of these
machines working so I can test a proper fix for that problem.
I also haven't updated the old-style fixup code from 85xx_cds.c
because it's actually buggy :) It assigns pci_dev->irq hard coded
numbers which is no good with the new IRQ mapping code. It should
at least use irq_create_mapping(NULL, hard_coded_number); and possibly
also set_irq_type() to set them as level low.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
| 1e76875e51266a5c43f601ecf08a92be5769228c |
|
06-Sep-2006 |
Olof Johansson <olof@lixom.net> |
[POWERPC] powerpc: PA Semi PWRficient platform support
Base patch for PA6T and PA6T-1682M. This introduces the
arch/powerpc/platform/pasemi directory, together with basic
implementations for various setup.
Much of this was based on other platform code, i.e. Maple, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|