5e40704ed2c69425bcb076fb1890417ef137e6c8 |
|
17-Apr-2014 |
Ian Campbell <ian.campbell@citrix.com> |
arm: xen: implement multicall hypercall support. As part of this make the usual change to xen_ulong_t in place of unsigned long. This change has no impact on x86. The Linux definition of struct multicall_entry.result differs from the Xen definition, I think for good reasons, and used a long rather than an unsigned long. Therefore introduce a xen_long_t, which is a long on x86 architectures and a signed 64-bit integer on ARM. Use uint32_t nr_calls on x86 for consistency with the ARM definition. Build tested on amd64 and i386 builds. Runtime tested on ARM. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
f832da068b0aadb15f747f6427b6bf945f525ba4 |
|
03-Oct-2012 |
Ian Campbell <ian.campbell@citrix.com> |
xen: arm: implement remap interfaces needed for privcmd mappings. We use XENMEM_add_to_physmap_range which is the preferred interface for foreign mappings. Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
ef32f89298c094b6ed76c0c4981b7a51e939cb71 |
|
17-Oct-2012 |
Ian Campbell <ian.campbell@citrix.com> |
xen: grant: use xen_pfn_t type for frame_list. This correctly sizes it as 64 bit on ARM but leaves it as unsigned long on x86 (therefore no intended change on x86). The long and ulong guest handles are now unused (and a bit dangerous) so remove them. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
37ea0fcb6a3f3318bf45888e624722a2945cec04 |
|
17-Oct-2012 |
Ian Campbell <ian.campbell@citrix.com> |
xen: sysfs: fix build warning. Define PRI macros for xen_ulong_t and xen_pfn_t and use to fix: drivers/xen/sys-hypervisor.c:288:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'xen_ulong_t' [-Wformat] Ideally this would use PRIx64 on ARM but these (or equivalent) don't seem to be available in the kernel. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
a1ce39288e6fbefdd8d607021d02384eb4a20b99 |
|
02-Oct-2012 |
David Howells <dhowells@redhat.com> |
UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
|
bd3f79b71de0410352ab506496a467fcb0620912 |
|
22-Aug-2012 |
Stefano Stabellini <stefano.stabellini@eu.citrix.com> |
xen: Introduce xen_pfn_t for pfn and mfn types All the original Xen headers have xen_pfn_t as mfn and pfn type, however when they have been imported in Linux, xen_pfn_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_pfn_t and let each architecture define xen_pfn_t as they see fit. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
4d9310e39728a87c86eb48492da7546f61189633 |
|
06-Aug-2012 |
Stefano Stabellini <stefano.stabellini@eu.citrix.com> |
xen: missing includes Changes in v2: - remove pvclock hack; - remove include linux/types.h from xen/interface/xen.h. v3: - Compile under IA64 Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
256f631f1f7e7bedc882510679ad4473a2274708 |
|
14-Sep-2012 |
Stefano Stabellini <stefano.stabellini@eu.citrix.com> |
xen/arm: Introduce xen_ulong_t for unsigned long All the original Xen headers have xen_ulong_t as unsigned long type, however when they have been imported in Linux, xen_ulong_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_ulong_t and let each architecture define xen_ulong_t as they see fit. Also explicitly size pointers (__DEFINE_GUEST_HANDLE) to 64 bit. Changes in v3: - remove the incorrect changes to multicall_entry; - remove the change to apic_physbase. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
73c154c60be106b47f15d1111fc2d75cc7a436f2 |
|
14-Feb-2012 |
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. For the hypervisor to take advantage of the MWAIT support it needs to extract from the ACPI _CST the register address. But the hypervisor does not have the support to parse DSDT so it relies on the initial domain (dom0) to parse the ACPI Power Management information and push it up to the hypervisor. The pushing of the data is done by the processor_harveset_xen module which parses the information that the ACPI parser has graciously exposed in 'struct acpi_processor'. For the ACPI parser to also expose the Cx states for MWAIT, we need to expose the MWAIT capability (leaf 1). Furthermore we also need to expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly function. The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX operations, but it can't do it since it needs to be backwards compatible. Instead we choose to use the native CPUID to figure out if the MWAIT capability exists and use the XEN_SET_PDC query hypercall to figure out if the hypervisor wants us to expose the MWAIT_LEAF capability or not. Note: The XEN_SET_PDC query was implemented in c/s 23783: "ACPI: add _PDC input override mechanism". With this in place, instead of C3 ACPI IOPORT 415 we get now C3:ACPI FFH INTEL MWAIT 0x20 Note: The cpu_idle which would be calling the mwait variants for idling never gets set b/c we set the default pm_idle to be the hypercall variant. Acked-by: Jan Beulich <JBeulich@suse.com> [v2: Fix missing header file include and #ifdef] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
3e0996798a6a113efae9e0187c5581491bdb07a7 |
|
24-Mar-2010 |
Yu Ke <ke.yu@intel.com> |
xen/acpi: Domain0 acpi parser related platform hypercall This patches implements the xen_platform_op hypercall, to pass the parsed ACPI info to hypervisor. Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Tian Kevin <kevin.tian@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> [v1: Added DEFINE_GUEST.. in appropiate headers] [v2: Ripped out typedefs] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
0d2eb44f631d9d0a826efa3156f157477fdaecf4 |
|
17-Mar-2011 |
Lucas De Marchi <lucas.de.marchi@gmail.com> |
x86: Fix common misspellings They were generated by 'codespell' and then manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: trivial@kernel.org LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
7e77506a5918d82cafa2ffa783ab57c23f9e9817 |
|
30-Sep-2010 |
Ian Campbell <ian.campbell@citrix.com> |
xen: implement XENMEM_machphys_mapping This hypercall allows Xen to specify a non-default location for the machine to physical mapping. This capability is used when running a 32 bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to exactly the size required. [ Impact: add Xen hypercall definitions ] Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
05e4d3169bd16229d84a2ef095e1ba2cd3873baa |
|
23-Oct-2008 |
H. Peter Anvin <hpa@zytor.com> |
x86: drop double underscores from header guards Drop double underscores from header guards in arch/x86/include. They are used inconsistently, and are not necessary. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
1965aae3c98397aad957412413c07e97b1bd4e64 |
|
23-Oct-2008 |
H. Peter Anvin <hpa@zytor.com> |
x86: Fix ASM_X86__ header guards Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
bb8985586b7a906e116db835c64773b7a7d51663 |
|
18-Aug-2008 |
Al Viro <viro@zeniv.linux.org.uk> |
x86, um: ... and asm-x86 move Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|