| 1668844ee642ed5734fc3e7ab5d7746ef8661961 |
|
04-Oct-2013 |
Hans Verkuil <hans.verkuil@cisco.com> |
[media] siano: fix sparse warnings
drivers/media/common/siano/smsdvb-main.c:47:5: warning: symbol 'sms_to_guard_interval_table' was not declared. Should it be static?
drivers/media/common/siano/smsdvb-main.c:54:5: warning: symbol 'sms_to_code_rate_table' was not declared. Should it be static?
drivers/media/common/siano/smsdvb-main.c:63:5: warning: symbol 'sms_to_hierarchy_table' was not declared. Should it be static?
drivers/media/common/siano/smsdvb-main.c:70:5: warning: symbol 'sms_to_modulation_table' was not declared. Should it be static?
drivers/media/common/siano/smscoreapi.c:925:35: warning: cast to restricted __le32
drivers/media/common/siano/smscoreapi.c:926:28: warning: cast to restricted __le32
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| ec532503209053bbee0c7dac410031e50835e01a |
|
14-Aug-2013 |
Bjørn Mork <bjorn@mork.no> |
[media] siano: fix divide error on 0 counters
GIT_AUTHOR_DATE=1376465691
I took a quick look at the code and wonder if the problem is caused by
an initial zero statistics message? This is all just a wild guess, but
if it is correct, then the attached untested patch might fix it...
Bjørn
>From d78a0599d5b5d4da384eae08bf7da316389dfbe5 Mon Sep 17 00:00:00 2001
ts_packets and ets_packets counters can be 0. Don't fall over
if they are. Fixes:
[ 846.851711] divide error: 0000 [#1] SMP
[ 846.851806] Modules linked in: smsdvb dvb_core ir_lirc_codec lirc_dev ir_sanyo_decoder ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_hauppauge smsusb smsmdtv rc_core pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) parport_pc ppdev lp parport cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative rfcomm bnep binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc ext4 jbd2 fuse tp_smapi(O) thinkpad_ec(O) loop firewire_sbp2 dm_crypt snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm thinkpad_acpi nvram snd_page_alloc hid_generic snd_seq_midi snd_seq_midi_event arc4 usbhid snd_rawmidi uvcvideo hid iwldvm coretemp kvm_intel mac8021
1 cdc_wdm
[ 846.853477] cdc_acm snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media kvm radeon r852 ttm joydev cdc_ether usbnet pcmcia mii sm_common nand btusb drm_kms_helper tpm_tis acpi_cpufreq bluetooth iwlwifi nand_ecc drm nand_ids i2c_i801 mtd snd_seq_device iTCO_wdt iTCO_vendor_support r592 memstick lpc_ich mperf tpm yenta_socket pcmcia_rsrc pcmcia_core cfg80211 snd_timer snd pcspkr i2c_algo_bit crc16 i2c_core tpm_bios processor mfd_core wmi psmouse mei_me rfkill mei serio_raw soundcore evdev battery button video ac microcode ext3 mbcache jbd md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod sd_mod cdrom crc_t10dif firewire_ohci sdhci_pci sdhci mmc_core firewire_core crc_itu_t thermal thermal_sys ahci libahci ehci_pci uhci_hcd ehci_hcd libata scsi_mod usbcore e1000
e usb_common
[ 846.855310] ptp pps_core
[ 846.855356] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10-2-amd64 #1 Debian 3.10.5-1
[ 846.855490] Hardware name: LENOVO 4061WFA/4061WFA, BIOS 6FET92WW (3.22 ) 12/14/2011
[ 846.855609] task: ffffffff81613400 ti: ffffffff81600000 task.ti: ffffffff81600000
[ 846.855636] RIP: 0010:[<ffffffffa092be0c>] [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb]
[ 846.863906] RSP: 0018:ffff88013bc03cf0 EFLAGS: 00010046
[ 846.863906] RAX: 0000000000000000 RBX: ffff880133bf6000 RCX: 0000000000000000
[ 846.863906] RDX: 0000000000000000 RSI: ffff88005d3b58c0 RDI: ffff880133bf6000
[ 846.863906] RBP: ffff88005d1da000 R08: 0000000000000058 R09: 0000000000000015
[ 846.863906] R10: 0000000000001a0d R11: 000000000000021a R12: ffff88005d3b58c0
[ 846.863906] R13: ffff88005d1da008 R14: 00000000ffffff8d R15: ffff880036cf5060
[ 846.863906] FS: 0000000000000000(0000) GS:ffff88013bc00000(0000) knlGS:0000000000000000
[ 846.863906] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 846.863906] CR2: 00007f3a4b69ae50 CR3: 0000000036dac000 CR4: 00000000000407f0
[ 846.863906] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 846.863906] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 846.863906] Stack:
[ 846.863906] ffff88007a102000 ffff88005d1da000 ffff88005d3b58c0 0000000000085824
[ 846.863906] ffffffffa08c5aa3 ffff88005d1da000 ffff8800a6907390 ffff8800a69073b0
[ 846.863906] ffff8800a6907000 ffffffffa08b642c 000000000000021a ffff8800a69073b0
[ 846.863906] Call Trace:
[ 846.863906] <IRQ>
[ 846.863906]
[ 846.863906] [<ffffffffa08c5aa3>] ? smscore_onresponse+0x1d5/0x353 [smsmdtv]
[ 846.863906] [<ffffffffa08b642c>] ? smsusb_onresponse+0x146/0x192 [smsusb]
[ 846.863906] [<ffffffffa004cb1a>] ? usb_hcd_giveback_urb+0x6c/0xac [usbcore]
[ 846.863906] [<ffffffffa0217be1>] ? ehci_urb_done+0x62/0x72 [ehci_hcd]
[ 846.863906] [<ffffffffa0217c82>] ? qh_completions+0x91/0x364 [ehci_hcd]
[ 846.863906] [<ffffffffa0219bba>] ? ehci_work+0x8a/0x68e [ehci_hcd]
[ 846.863906] [<ffffffff8107336c>] ? timekeeping_get_ns.constprop.10+0xd/0x31
[ 846.863906] [<ffffffff81064d41>] ? update_cfs_rq_blocked_load+0xde/0xec
[ 846.863906] [<ffffffff81058ec2>] ? run_posix_cpu_timers+0x25/0x575
[ 846.863906] [<ffffffffa021aa46>] ? ehci_irq+0x211/0x23d [ehci_hcd]
[ 846.863906] [<ffffffffa004c0c1>] ? usb_hcd_irq+0x31/0x48 [usbcore]
[ 846.863906] [<ffffffff810996fd>] ? handle_irq_event_percpu+0x49/0x1a4
[ 846.863906] [<ffffffff8109988a>] ? handle_irq_event+0x32/0x4b
[ 846.863906] [<ffffffff8109bd76>] ? handle_fasteoi_irq+0x80/0xb6
[ 846.863906] [<ffffffff8100e93e>] ? handle_irq+0x18/0x20
[ 846.863906] [<ffffffff8100e657>] ? do_IRQ+0x40/0x95
[ 846.863906] [<ffffffff813883ed>] ? common_interrupt+0x6d/0x6d
[ 846.863906] <EOI>
[ 846.863906]
[ 846.863906] [<ffffffff812a011c>] ? arch_local_irq_enable+0x4/0x8
[ 846.863906] [<ffffffff812a04f3>] ? cpuidle_enter_state+0x52/0xc1
[ 846.863906] [<ffffffff812a0636>] ? cpuidle_idle_call+0xd4/0x143
[ 846.863906] [<ffffffff8101398c>] ? arch_cpu_idle+0x5/0x17
[ 846.863906] [<ffffffff81072571>] ? cpu_startup_entry+0x10d/0x187
[ 846.863906] [<ffffffff816b3d3d>] ? start_kernel+0x3e8/0x3f3
[ 846.863906] [<ffffffff816b3777>] ? repair_env_string+0x54/0x54
[ 846.863906] [<ffffffff816b3598>] ? x86_64_start_kernel+0xf2/0xfd
[ 846.863906] Code: 25 09 00 00 c6 83 da 08 00 00 03 8b 45 54 48 01 83 b6 08 00 00 8b 45 50 48 01 83 db 08 00 00 8b 4d 18 69 c1 ff ff 00 00 03 4d 14 <48> f7 f1 89 83 a8 09 00 00 e9 68 fe ff ff 48 8b 7f 10 e8 79 92
[ 846.863906] RIP [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb]
[ 846.863906] RSP <ffff88013bc03cf0>
Reference: http://bugs.debian.org/719623
Reported-by: Johannes Rohr <jorohr@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 250a51caa65cc7637f3596300d3591a2c924b32e |
|
19-May-2013 |
Jakob Normark <jakobnormark@gmail.com> |
[media] Missing break statement added in smsdvb-main.c
Fix missing break that so that n_layers are not accidentally incorrect
Kernel version: v3.10-rc1
Signed-off-by: Jakob Normark <jakobnormark@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| f35d09db0e61009679e41cc5afa2d205b99c3816 |
|
22-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: use do_div() for 64-bits division
As reported by Frank Schäfer <fschaefer.oss@googlemail.com>:
ERROR: "__divdi3" [drivers/media/common/siano/smsdvb.ko] undefined!
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Tested-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 28a59df4d7cb8f749ba92ad304df4063ccf108fd |
|
21-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: remove the remaining CamelCase compliants
Remove the remaining CamelCase checkpatch.pl compliants.
There are still a few left, but those are due to USB and
DVB APIs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| cf0e9cfcc70d8aaeabf19356f42041f8a5495301 |
|
21-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: convert structure names to lowercase
There are several structures defined in uppercase. Convert them
to lowercase, and simplify their names, when possible.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| dfef84fc135832ad5c270758b6834fcb4bf448fc |
|
21-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: get rid of CammelCase from smscoreapi.h
It is almost impossible to see a compliant with checkpatch.pl
on those Siano drivers, as there are simply too much violations
on it. So, now that a big change was done, the better is to
cleanup the checkpatch compliants.
Let's first replace all CammelCase symbols found at smscoreapi.h
using camel_case namespace. That removed 144 checkpatch.pl
compliants on this file. Of course, the other files need to be
fixed accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 98c3f94e6db3b4df21336b41c646366ea417527c |
|
19-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: remove doubled new line
sms_debug() and sms_info() already adds a '\n' at the printed
strings. No need to add more.
That helps to cleanup stuff like:
[ 4868.205648] smscore_onresponse: message not handled.
[ 4868.205898] smscore_onresponse: message not handled.
and:
[ 5467.959769] smscore_onresponse:
data rate 143069 bytes/secs
While here, provides the message name, when the message is not
handled by the smsmdtv core.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 773adad14135999380a4652b4ba01c5694827870 |
|
17-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: fix status report with old firmware and ISDB-T
This seems to be ever broken. That's the status report with
Firmware 2.1, before adding support for sms2270 is:
[22273.787218] smsdvb_onresponse: MSG_SMS_GET_STATISTICS_RES
[22273.792592] IsRfLocked = 1
[22273.792592] IsDemodLocked = 1
...
[22273.792598] TransmissionMode = -64
...
(all unshown fields are filled with zeros)
Of course, transmission mode being a negative number is wrong.
So, we need to take a deeper look on it.
With the debugfs patches applied, it is possible to see that, instead
of filling StatisticsType with 5, and FullSize with the size of the
payload (this is what happens with sms2270 and firmware 8.1),
those fields are also initialized with zero:
StatisticsType = 0 FullSize = 0
IsRfLocked = 1 IsDemodLocked = 1 IsExternalLNAOn = 0
SNR = 0 dB RSSI = 0 dBm InBandPwr = 0 dBm
CarrierOffset = 0 Bandwidth = 0 Frequency = 0 Hz
TransmissionMode = -64 ModemState = 0 GuardInterval = 0
SystemType = 0 PartialReception = 0 NumOfLayers = 0
SmsToHostTxErrors = 0
The data under "TransmissionMode" varies according with the signal,
and it is negative. It also matches the value for InBandPwr when
the tuner is on DVB-T (ok, signal doesn't lock, but the power level
should be about the same with the antena fixed, and measured at about
the same time).
So, there's a very high chance that, when StatisticsType is zero, the
signal strength is at the same position as Transmission Mode.
So, discard all other parameters, and provide only signal/rf lock and
signal strength if StatisticsType is 0, for ISDB-T.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| e1b2ac4d1e6bb214823c42bb807a6cc5f21aa223 |
|
15-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: Only feed DVB data when there's a feed
Right now, the driver sends DVB data even before tunning.
It was noticed that this may lead into some mistakes at DVB
decode, as the PIDs from wrong channels may be associated with
another frequency, as they may already be inside the PID buffers.
So, prevent it by not feeding DVB demux with data while there's no
feed or while the device is not tuned.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 5c3b87435b291efb260aec37fdbe397859e550c5 |
|
10-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: Fix bandwidth report
It was expected that the bandwidth would be following the defines
at smscoreapi.h. However, this doesn't work. Instead, this field
brings just the bandwidth in MHz. Convert it to Hertz.
It should be noticed that, on ISDB, using the _EX request, the
field TuneBW seems to show the value that matches the bandwidth
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 9671045f4ce7a9e5eedc669a6921aeec26bd095e |
|
10-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: fix PER/BER report on DVBv5
The check for lock logic is broken. Due to that, no PER/BER
stats will ever be showed, and the DVBV3 events will be wrong.
Also, the per-layer PER/BER stats for ISDB-T are filled with
the wrong index.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| f5de95e2467b7b6b968e6c67489425265dd2a1c2 |
|
10-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: fix signal strength and CNR stats measurements
There are a number of small issues with the stats refactoring:
- InBandPwr better represents the signal strength;
- Don't zero signal strength /cnr if no lock;
- Fix signal strength/cnr scale;
- Don't need to fill PER/BER if not locked, as the
code will disable those stats anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| a9b9fbdf0a6a65359cd97254a282526822de5257 |
|
10-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: don't request statistics too fast
As each DVBv3 call may generate an stats overhead, prevent doing
it too fast. This is specially useful if a burst of get stats
DVBv3 call is sent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 503efe5cfc9fb9f67a6659c4ab39174b442876f3 |
|
10-Mar-2013 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] siano: split debugfs code into a separate file
To avoid mixing two different things at the same place, move the
debugfs code into a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|