| f5d82a75e666a6cc66453285cb3ce28c5d02397a |
|
08-Sep-2014 |
Akihiro Tsukada <tskd08@gmail.com> |
[media] tc90522: add driver for Toshiba TC90522 quad demodulator
This patch adds driver for tc90522 demodulator chips.
The chip contains 4 demod modules that run in parallel and are independently
controllable via separate I2C addresses.
Two of the modules are for ISDB-T and the rest for ISDB-S.
It is used in earthsoft pt3 cards.
Note that this driver does not init the chip,
because the initilization sequence / register setting is not disclosed.
Thus, the driver assumes that the chips are initilized externally
by its parent board driver before fe->ops->init() are called.
Earthsoft PT3 PCIe card, for example, contains the init sequence
in its private memory and provides a command to trigger the sequence.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
| 868736ad3404b205794bc04233eca58293818dea |
|
08-Aug-2014 |
Olli Salonen <olli.salonen@iki.fi> |
[media] sp2: Add I2C driver for CIMaX SP2 common interface module
Driver for the CIMaX SP2 common interface chip. It is very much based on
the existing cimax2 driver for cx23885, but should be more reusable. The
product has been sold with name Atmel T90FJR as well and the data sheets
for that chip seem to be publicly available.
It seems that the USB device that I have and the cx23885 based devices will
need to interact differently with the chip for the CAM operations. Thus
there is one callback function that is passed on to the sp2 driver
(see function sp2_ci_op_cam for that one).
IRQ functionality is not included currently (not needed by USB devices
and I don't have a PCIe device for development).
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| dcae77814865122ed411de1a4e8ebd02796cf3c4 |
|
12-Aug-2014 |
Mauro Carvalho Chehab <m.chehab@samsung.com> |
[media] as102-fe: make it an independent driver
Move as102-fe to dvb-frontends directory and make it an
independent driver.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 3e54a1697ace99d1ad602ec268abf117ace1412f |
|
22-Jul-2014 |
Matthias Schwarzott <zzam@gentoo.org> |
[media] si2165: Add demod driver for DVB-T only
DVB-T was tested with 8MHz BW channels in germany
This driver is the simplest possible, it uses automatic mode for all
parameters (TPS).
Added spectrum inversion support.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 69cc4bfab9e65168f50a1f1d163c0d70a394bae3 |
|
25-Jul-2014 |
Antti Palosaari <crope@iki.fi> |
[media] Kconfig: rtl2832_sdr must depend on USB
Fixes error:
[next:master 7435/8702] ERROR: "usb_alloc_urb
[drivers/media/dvb-frontends/rtl2832_sdr.ko] undefined!
rtl2832_sdr driver implements own USB streaming for SDR data.
Logically that functionality belongs to USB interface driver, but
currently it is implemented here.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 64a43323e429d2b183fc02451b3201cce873807d |
|
22-Jul-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2832_sdr: fix Kconfig dependencies
MEDIA_SDR_SUPPORT and I2C_MUX are needed for rtl2832_sdr.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 77bbb2b049c1c3e935f5bec510bec337d94ae8f8 |
|
15-Jul-2014 |
Antti Palosaari <crope@iki.fi> |
rtl2832_sdr: move from staging to media
Move rtl2832_sdr driver module from staging to media.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 845f35052ea94661dd32d80fc95a93d0502345e2 |
|
11-Apr-2014 |
Antti Palosaari <crope@iki.fi> |
[media] si2168: Silicon Labs Si2168 DVB-T/T2/C demod driver
Silicon Labs Si2168 DVB-T/T2/C demod driver.
That driver version supports only DVB-T.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 8823f0288d345a26b27502c71f8ca3d05b4ac013 |
|
26-Nov-2013 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2832: provide muxed I2C adapter
RTL2832 provides gated / repeater I2C adapter for tuner.
Implement it as a muxed I2C adapter.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 38b2df95c53be4bd5421d933ca0dabbcb82741d0 |
|
14-Aug-2012 |
Devin Heitmueller <dheitmueller@kernellabs.com> |
[media] drx-j: add a driver for Trident drx-j frontend
Add support for the Trident DRX-J driver, including a card profile for the
PCTV 80e which uses the chip.
Thanks to Trident for allowing the release of this code under a BSD license,
and of course Hauppauge/PCTV for pushing for its release to the community.
[pdickeybeta@gmail.com: modified to fix compilation errors and also to move
the driver files from the drx39xy subdirectory to the frontends directory]
[m.chehab@samsung.com: fix merge conflicts, commented drx-j compilation and
added EM28XX_R06_I2C_CLK setup also to the board setup]
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 182f3fe92967d2287c1eab11bafe86a896fda949 |
|
13-Feb-2014 |
Malcolm Priestley <tvboxspy@gmail.com> |
[media] it913x-fe: Dead code remove driver
This driver has been replaced by af9033 and tuner_it913x
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 44b9055b4b058d7b02bf0380158627f9be79b9e5 |
|
20-Nov-2013 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: use I2C mux for tuner I2C adapter
Switch standard I2C adapter to muxed I2C adapter.
David reported that I2C adapter implementation caused deadlock.
I discussed with Jean and he suggested to implement it as a
multiplexed i2c adapter because tuner I2C bus could be seen like
own I2C segment.
Reported-by: David Howells <dhowells@redhat.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 395d00d1ca8947887fd0fbdec4fff90c4da21877 |
|
25-Feb-2013 |
Antti Palosaari <crope@iki.fi> |
[media] Montage M88DS3103 DVB-S/S2 demodulator driver
DVB-S/S2 satellite television demodulator driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| 0d78868094c482367692cf40f6c364e06815ad05 |
|
02-Oct-2013 |
Luis Alves <ljalvs@gmail.com> |
[media] dvb: add cx24117 frontend
Add support for the cx24117 dual DVB-S/S2 frontend.
Signed-off-by: Luis Alves <ljalvs@gmail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
| d65fcbb0007bd8f0bcb93d1acd7970eea2aa06fc |
|
11-Mar-2013 |
Paul Bolle <pebolle@tiscali.nl> |
[media] ts2020: use customise option correctly
The Kconfig entry for "TS2020 based tuners" defaults to modular if
DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with
MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate
the logic, so we are in line with all the similar entries in this file.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 6fef4fc71e79282b673d7613cfc63da6bdeec5bd |
|
23-Dec-2012 |
Konstantin Dimitrov <kosio.dimitrov@gmail.com> |
[media] ts2020: add ts2020 tuner driver
add separate ts2020 tuner driver
Signed-off-by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| fccea74ff8b5159935acc7b4b4857ee81ee44661 |
|
20-Aug-2012 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] Kconfig: merge all customise options into just one
Instead of having 3 options to allow customizing the media
sub-drivers (tuners, I2C drivers, frontends), merge all of
them into just one.
That simplifies the life for users, as they can just keep
this untouched.
Life for developers is also simpler, as there's now just
one Kconfig item to remember, for the ancillary sub-drivers
providing supports for chips that could change from one
board design to another.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 9a0bf528b4d66b605f02634236da085595c22101 |
|
14-Aug-2012 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] move the dvb/frontends to drivers/media/dvb-frontends
Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|