2c84417a1305da892c8a7d0bf8d0bad50d1688b8 |
|
30-Jul-2009 |
San Mehat <san@google.com> |
mmc: mmcblk: Add support for deferred SD bus resume Signed-off-by: San Mehat <san@google.com> mmc: card: Add MMC_BLOCK_DEFERRED_RESUME option to Kconfig Signed-off-by: San Mehat <san@google.com>
|
4f73bc4dd3e8563ef4109f293a092820dff66d92 |
|
18-Jan-2013 |
Joe Millenbach <jmillenbach@gmail.com> |
tty: Added a CONFIG_TTY option to allow removal of TTY The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
50cec37c1ac24e9a02b845242a4712e2fb092b5c |
|
10-Feb-2011 |
Will Newton <will.newton@gmail.com> |
mmc: Improve MMC_TEST config text. The test file is created under debugfs, not sysfs. Also remove the unnecessary default n. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
|
b37427b0a4e01ab5aaec1c9af7cef616ac4ce6d6 |
|
04-Jan-2011 |
Chris Ball <cjb@laptop.org> |
mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK. Signed-off-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Acked-by: Olof Johansson <olof@lixom.net>
|
5e71b7a64cb4c6cff75ca42b535d8227526ec592 |
|
18-Sep-2010 |
Olof Johansson <olof@lixom.net> |
mmc: make number of mmcblk minors configurable The old limit of number of minor numbers per mmcblk device was hardcoded at 8. This isn't enough for some of the more elaborate partitioning schemes, for example those used by Chrome OS. Since there might be a bunch of systems out there with static /dev contents that relies on the old numbering scheme, let's make it a build-time option with the default set to the previous 8. Also provide a boot/modprobe-time parameter to override the config default: mmcblk.perdev_minors. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Mandeep Baines <msb@chromium.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
|
57105737f6a0b39305a85ac176cc9fd4a236d8c2 |
|
07-Sep-2008 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: explicitly mention SDIO support in Kconfig Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
1ea4f444f3a9721babd5d22cbd15092f9da6b51a |
|
07-Sep-2008 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: remove redundant "depends on" Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
88ae600d58a8d3160144af480133a988404b8d59 |
|
12-Aug-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: mmc host test driver A dummy driver that performs a series of requests that are often mis- handled by host drivers. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
6e418a9d26ab4fd44b3e07dc1158027cbdf0a919 |
|
30-Jun-2007 |
Nicolas Pitre <nico@cam.org> |
sdio: UART/GPS driver This currently only accepts the GPS class since that's all I have for testing. Tested with a Matsushita GPS and gpsd version 2.34. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
98ccf14909ba02a41c5925b0b2c92aeeef23d3b9 |
|
12-May-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: bounce requests for simple hosts Some hosts cannot do scatter/gather in hardware. Since not doing sg is such a big performance hit, we (optionally) bounce the requests to a simple linear buffer that we hand over to the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
790864dcc2b3fe65355dd84ef8481e54b1bc61b6 |
|
08-May-2007 |
Jan Engelhardt <jengelh@gmx.de> |
mmc: Use menuconfig objects Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
1c6a0718f0bfdab0d9b7da5f7b74f38a0058c03a |
|
11-Feb-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: Move host and card drivers to subdirs Clean up the drivers/mmc directory by moving card and host drivers into subdirectories. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|