| 968a64ea638bbd48839b41981ff50197f3412676 |
|
22-Oct-2012 |
Kyoungil Kim <ki0351.kim@samsung.com> |
mmc: sdio: Use multiple scatter/gather list
Before this patch, we always used only single sg entry for SDIO transfer.
This patch switches to using multiple sg entries. In the case of dwmci,
it supports only up to 4KB size per single sg entry. So if we want to
transfer more than 4KB, we should send more than 1 command.
When we tested before applying this patch, it took around 335 us for
5K(5120) bytes transfer with dwmci controller. After applying this patch,
it takes 242 us for 5K bytes. So this patch makes around 38% performance
improvement for 5K bytes transfer. If the transfer size is bigger, then
the performance improvement ratio will be increased.
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| 052d81da6e6f0f8839ef6d5a46f215fc8cd99d5a |
|
26-Oct-2011 |
Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> |
mmc: sdio: Fix to support any block size optimally
This patch allows any block size to be set on the SDIO link,
and still have an arbitrary sized packet (adjusted in size by
using sdio_align_size) transferred in an optimal way
(preferably one transfer).
Previously if the block size was larger than the default of
512 bytes and the transfer size was exactly one block size
(possibly thanks to using sdio_align_size to get an optimal
transfer size), it was sent as a number of byte transfers instead
of one block transfer. Also if the number of blocks was
(max_blocks * N) + 1, the tranfer would be conducted with a number
of blocks and finished off with a number of byte transfers.
When doing this change it was also possible to break out the quirk
for broken byte mode in a much cleaner way, and collect the logic of
when to do byte or block transfer in one function instead of two.
Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| 9a0da648ff3a5020406ac7784eb3b519014f66f6 |
|
15-Sep-2011 |
Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> |
mmc: sdio: Workaround for dev with broken CMD53
Adds a quirk which can be turned on for SDIO devices that do not support
512 byte requests in byte mode during CMD53. These requests will always
be sent in block mode instead.
This patch also enables this quirk for ST-Ericsson CW1200 WLAN device.
Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Signed-off-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| ad5fd97288655b5628052c1fa906419417c86100 |
|
24-Aug-2011 |
Venkatraman S <svenkatr@ti.com> |
mmc: fix integer assignments to pointer
Fix the sparse warning output "warning: Using plain integer as NULL pointer"
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| 24f5b53ba076e983bc64fa48534ca795d7813d51 |
|
14-Apr-2011 |
Chris Ball <cjb@laptop.org> |
mmc: initialize struct mmc_request at declaration time
Converts from:
struct mmc_request mrq;
memset(&mrq, 0, sizeof(struct mmc_request));
to:
struct mmc_request mrq = {0};
because it's shorter, as performant, and easier to work out whether
initialization has happened.
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| a61ad2b49bfce94dfddce828cd9222e4b9e7825b |
|
14-Apr-2011 |
Chris Ball <cjb@laptop.org> |
mmc: initialize struct mmc_data at declaration time
Converts from:
struct mmc_data data;
memset(&data, 0, sizeof(struct mmc_data));
to:
struct mmc_data data = {0};
because it's shorter, as performant, and easier to work out whether
initialization has happened.
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| 1278dba167f01bb3c6626d16450d31129d041087 |
|
14-Apr-2011 |
Chris Ball <cjb@laptop.org> |
mmc: initialize struct mmc_command at declaration time
Converts from:
struct mmc_command cmd;
memset(&cmd, 0, sizeof(struct mmc_command));
to:
struct mmc_command cmd = {0};
because it's shorter, as performant, and easier to work out whether
initialization has happened.
Signed-off-by: Chris Ball <cjb@laptop.org>
|
| 516a82422209e078345d0ca54b16793d7bfd4782 |
|
11-Mar-2010 |
Albert Herranz <albert_herranz@yahoo.es> |
sdio: recognize io card without powercycle
SDIO Simplified Specification V2.00 states that it is strongly recommended
that the host executes either a power reset or issues a CMD52 (I/O Reset)
to re-initialize an I/O only card or the I/O portion of a combo card.
Additionally, the CMD52 must be issued first because it cannot be issued
after a CMD0.
With this patch the Nintendo Wii SDIO-based WLAN card is detected after a
system reset, without requiring a complete system powercycle.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| be6f19fc24c937112d251232b3dae7e05e96aad1 |
|
05-Mar-2009 |
Pierre Ossman <drzeus@drzeus.cx> |
sdio: check that addresses are within the address space
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
| e70aa3fac1ac50c7a75ac676a1489dd1ea3b4be5 |
|
13-Apr-2008 |
Adrian Bunk <bunk@kernel.org> |
mmc: sdio_ops.c should #include "sdio_ops.h"
Every file should include the headers containing the externs for its
global functions.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
| 87ae9afdcada236d0a1b38ce2c465a65916961dc |
|
30-Oct-2007 |
Adrian Bunk <bunk@kernel.org> |
cleanup asm/scatterlist.h includes
Not architecture specific code should not #include <asm/scatterlist.h>.
This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
| af51715079e7fb6b290e1881d63d815dc4de5011 |
|
08-Aug-2007 |
David Brownell <david-b@pacbell.net> |
MMC core learns about SPI
Teach the MMC/SD/SDIO core about using SPI mode.
- Use mmc_host_is_spi() so enumeration works through SPI signaling
and protocols, not just the native versions.
- Provide the SPI response type flags with each request issued,
including requests from the new lock/unlock code.
- Understand that cmd->resp[0] and mmc_get_status() results for SPI
return different values than for "native" MMC/SD protocol; this
affects resetting, checking card lock status, and some others.
- Understand that some commands act a bit differently ... notably:
* OP_COND command doesn't return the OCR
* APP_CMD status doesn't have an R1_APP_CMD analogue
Those changes required some new and updated primitives:
- Provide utilities to access two SPI-only requests, and one
request that wasn't previously needed:
* mmc_spi_read_ocr() ... SPI only
* mmc_spi_set_crc() ... SPI only (override by module parm)
* mmc_send_cid() ... for use without broadcast mode
- Updated internal routines:
* Previous mmc_send_csd() modified into mmc_send_cxd_native();
it uses native "R2" responses, which include 16 bytes of data.
* Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data()
helper for command-and-data access
* Bugfix to that mmc_send_cxd_data() code: dma-to-stack is
unsafe/nonportable, so kmalloc a bounce buffer instead.
- Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper
- Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use
those helper routines based on whether they're native or SPI
The newest categories of cards supported by the MMC stack aren't expected
to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO.
All those cards support SPI mode, so eventually they should work too.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
| eb6594689226663968ef0a9fd71ec5e1e4e04f9c |
|
08-Aug-2007 |
David Vrabel <david.vrabel@csr.com> |
sdio: extend sdio_readsb() and friends to handle any length of buffer
Extend sdio_readsb(), sdio_writesb(), sdio_memcpy_fromio(), and
sdio_memcpy_toio() to handle any length of buffer by splitting the transfer
into several IO_RW_EXTENDED commands. Typically, a transfer would be split
into a single block mode transfer followed by a byte mode transfer for the
remainder but we also handle lack of block mode support and the block size
being greater than 512 (the maximum byte mode transfer size).
host->max_seg_size <= host->max_req_size so there's no need to check both
when determining the maximum data size for a single command.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
| 112c9db91ee6bf19eca7cbb6854be3127381c229 |
|
06-Jul-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
sdio: support IO_RW_EXTENDED
Support the multi-byte transfer operation, including handlers for
common operations like writel()/readl().
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
| b2bcc798bbb482b2909801280f3c4aff8cbbf5be |
|
22-May-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: implement SDIO IO_RW_DIRECT operation
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
| 5c4e6f1301649d5b29dd0f70e6da83e728ab5ca5 |
|
21-May-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
mmc: detect SDIO cards
Really basic init sequence for SDIO cards.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|