| 5f667642f4b290b04d88d5ca926fba81fed6180d |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init
... to remove some more dups.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4b2d841f5bc3143f5a019b6a441c19bf2986bdf4 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath9k_cmn_beacon_config_ap
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 12f53c308ecbe2b76798a5091f8452eeed0a732b |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath9k_cmn_beacon_config_adhoc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| f7197924d5187201e1a6e1617ad7a8c81f333330 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath9k_htc_beacon_init in ath9k_htc_beacon_config_adhoc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4a4495a5fdf3f5d2e98446c94146dcaefb06a69b |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath9k_htc_beacon_init in ath9k_htc_beacon_config_ap
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 7f5c4c8320f853e17ec1c6dbb78d3753ba76a6cd |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: add ath9k_htc_beacon_init (but not use it)
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| f84224402bddea8e2762869f4eaebc3b46be2aa0 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath9k_cmn_beacon_config_sta
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 92c3f7ef2c59de5c6b58504d330a59f8e8d78e88 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use common->op_flags
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 88a4f56ef09d6f38beee79e9abff7cb7f867dc52 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath_beacon_conf.enable_beacon
to reduce difference between ath9k and ath9k_htc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| a099874ed9db31e8ac0d8173394e54081d518635 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: move beaconq to struct htc_beacon
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 3c4816d9a324f06c481dcc36c8dc1168f5d785c5 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use common ath_beacon_config
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 527492eefcee253e33bbe79bcfef6bedf9935492 |
|
26-Feb-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: remove unused variable sleepduration
sleepduration is always = intval.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4ed15762dce67192d4662860470a8be1f6d5fd53 |
|
14-Dec-2013 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: clean up station beacon timer API
Remove unused fields, pass timer info in usec instead of TU.
Preparation for fixing nexttbtt calculation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 594e65b633e0b76db1d8e7359e4efb2d60fba20d |
|
08-May-2013 |
Javier Cardona <javier@cozybit.com> |
ath9k_htc: Add support for mesh interfaces
More specifically, enable AP-style beaconing on mesh
ifaces and change the hw capabilities to reflect mesh
support.
Coexistence with a virtual STA interface was tested as
working fine.
Signed-off-by: Javier Cardona <javier@cozybit.com>
[rebase, add iface combinations]
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| c60c99298c50b698b0bbbe0e0146c965c322b8c1 |
|
08-Apr-2013 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_common: remove ath9k_cmn_padpos
It is equivalent to ieee80211_hdrlen
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| bea843c73854becf998047a83af22a90de3fd19b |
|
21-Nov-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k/ath9k_htc: Remove WME macros
Use the macros provided by mac80211 and remove redundant
declarations inside the drivers.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 8b2c98243e8d00f9c6b6059976d6de51491ee0c7 |
|
06-Nov-2012 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: clarify interface iteration and make it configurable
During hardware restart, all interfaces are iterated even
though they haven't been re-added to the driver, document
this behaviour. The same also happens during resume, which
is even more confusing since all of the interfaces were
previously removed from the driver. Make this optional so
drivers relying on the current behaviour can still use it,
but to let drivers that don't want this behaviour disable
it.
Also convert all API users, keeping the old semantics
except in hwsim, where the new normal ones are desired.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| 36323f817af0376c78612cfdab714b0feb05fea5 |
|
23-Jul-2012 |
Thomas Huehn <thomas@net.t-labs.tu-berlin.de> |
mac80211: move TX station pointer and restructure TX
Remove the control.sta pointer from ieee80211_tx_info to free up
sufficient space in the TX skb control buffer for the upcoming
Transmit Power Control (TPC).
Instead, the pointer is now on the stack in a new control struct
that is passed as a function parameter to the drivers' tx method.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[reworded commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| d8a2c51cdcaee0131c88f49d64b84f1c7361d72c |
|
25-Jun-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_htc: Use atomic operations for op_flags
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| d2182b69dcb6a68b1ef6070b2efd094e13dea3f1 |
|
15-Dec-2011 |
Joe Perches <joe@perches.com> |
ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOO
Add ATH_DBG_ to macros to shorten the uses and
reduce the line count.
Coalesce ath_dbg formats.
Add missing spaces to coalesced formats.
Add missing newline terminations to ath_dbg formats.
Align ath_dbg arguments where appropriate.
Standardize ath_dbg formats without periods.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| f29f5c0882bdd58c42b8176ee0b578f92589fda2 |
|
20-May-2011 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k: Remove ATH9K_BEACON_PERIOD mask
Earlier beacon_interval is used to hold interval value and
some flags (ATH9K_BEACON_ENA &ATH9K_BEACON_PERIOD). So to
extract interval ATH9K_BEACON_PERIOD is used. Those flags
were completely removed. So masking beacon_interval is
not required.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 5b68138e5659cbfd5df2879d17f9ba0b66477fec |
|
17-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k: Drag the driver to the year 2011
The Times They Are a-Changin'.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 0ff2b5c05d4dd84222a8e163335c5b550e2ca195 |
|
20-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k: Fix warnings from -Wunused-but-set-variable
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| cea3235cf578b5e952f5a0cec9bc6c2e862eb697 |
|
16-Apr-2011 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: Fix free slot value for cab queue
ath9k_htc_tx_get_slot can return zero as valid index.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Acked-by: Sujith Manoharan <Sujith.Manoharan@Atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 2c5d57f004673a9c8658e20b1fa3f992b5a10f70 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add TX slots
Maintain a bitmap of slots for transmission and update
the cookie field for every packet with the slot value.
This value would be used for matching packets when TX
completion processing is added.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| d67ee5339363608adce786ec8fd62a0fb2b66116 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Introduce new HTC API
A new routine that takes an endpoint explicitly is
introduced. The normal htc_send() now retrieves the endpoint
from the packet's private data. This would be useful
in TX completion when the endpoint ID would be required.
While at it, use a helper function to map the queue to endpoint.
Data/mgmt/beacon packets use htc_send(), while WMI comamnds
pass the endpoint to HTC.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 8e86a54715c4102a8ed697939de9ebd9715dc59c |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix TX queue management
Handle queue start/stop properly by maintaining
a counter to check if the pending frame count has
exceeded the threshold. Otherwise, packets would be
dropped needlessly. While at it, use a simple flag
to track queue status and use helper functions too.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 40dc9e4b86963b77918f1b8fa02b98c1e420a7e1 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Use SKB's private area for TX parameters
For all packets sent through the USB_WLAN_TX_PIPE endpoint,
the private area of the SKB's tx_info can be used to store
driver-specific information. For packets sent through USB_REG_OUT_PIPE,
this will not make a difference since they are routed through a
separate routine that doesn't access the private region.
This would help in situations where TX information is required
in the URB callback.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| f4c88991f51e097b6541f998fd23d477999e5886 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Queue WMI events
Use a queue to handle WMI events and schedule a tasklet
to process the events. This fixes the race between the
WMI event ISR and the SWBA tasklet when the arrival of
WMI events in quick succession could overwrite the SWBA
data before the tasklet from a previous iteration could
have been scheduled. Also, drain the WMI queue properly.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| b0a6ba983e3663bf256ca2e79d17bb846878cd9e |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix beacon miss under heavy load
Transmission of beacons becomes erratic when TX load
is high, since the latency involved in the generation
of a SWBA interrupt on the target to the actual sending
of a beacon is quite high for USB devices.
Fix this by adjusting the beacon response time.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 7d547eb4bb664c5a6b7c8790c2ecb0aec5d15385 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle buffered frames in AP mode
Use the CAB endpoint to send buffered multicast or
broadcast frames after each SWBA event.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 2493a547ee81e6daca812d5dd7cf9357aebc379b |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Configure the beacon queue
Set operating parameters (cwmin, cwmax) for the beacon queue
in AP mode.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9b674a0207c9b75ddcdcdb07e46843fac8267507 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add TSF adjust capability
In multi-interface mode, beacons/probe responses that are
sent out must have their timestamp field updated. Calculate
the TSF adjustment value for each beaconing interface and set it
in the frame properly.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 832f6a18fc2aead14954c081ece03b7a5b425f81 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add beacon slots
Beacon transmission is now handled through a slot mechanism.
This allows multiple beaconing interfaces to be be present.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| dd347f2fb2ddb20a80e9a8285252bf208ab91398 |
|
22-Mar-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: fix beacon timer handling issues
AP mode beacon timers in ath9k are configured in milliseconds, which breaks
when increasing ATH_BCBUF to 8 instead of 4 (due to rounding errors).
Since the hardware timers are actually configured in microseconds, it's
better to let the driver use that unit directly.
To be able to do that, the beacon interval parameter abuse for passing
certain flags needs to be removed. This is easy to do, because those flags
are completely unnecessary anyway. ATH9K_BEACON_ENA is ignored,
ATH9K_BEACON_RESET_TSF can be replaced with calling ath9k_hw_reset_tsf
from the driver directly.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| e7a2a4f5e61ccfae03185384e06b852dbb1e3630 |
|
27-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle BSSID/AID for multiple interfaces
The AID and BSSID should be set in the HW only for the
first station interface or adhoc interface. Also, cancel
the ANI timer in stop() for multi-STA scenario. And finally
configure the HW beacon timers only for the first station
interface.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 200be651f77f8407086873520436bf55a4468e26 |
|
21-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix TBTT calculation for IBSS mode
The target beacon transmission time has to be synced with the HW
TSF when configuring beacon timers in Adhoc mode. Failing to do this
would cause erroneous beacon transmission, for example, on completion
of a scan run to check for IBSS merges.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| a5fae37d118bb633708b2787e53871e38bf3b15e |
|
21-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Configure beacon timers in AP mode
Handle multi-interface situations by checking if
AP interfaces are already present.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9a3d025be11a1da625f8a71636b55a3bd3718574 |
|
21-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Make sequence number calculation per-VIF
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 7c277349ecbd66e19fad3d949fa6ef6c131a3b62 |
|
21-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove OP_ASSOCIATED variable
mac80211 stores the association state in ieee80211_bss_conf.
Use this and remove the local state, which is incorrect anyway
since it is stored globally and not on a per-VIF basis.
Restarting ANI and reconfiguration of HW beacon timers when a
scan run ends requires more work. This is handled by iterating
over the active interfaces.
Finally, remove the useless check for associated status in RX
processing.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 226afe68fdbd1aa3680158aca0a3631cbd019626 |
|
03-Dec-2010 |
Joe Perches <joe@perches.com> |
ath: Convert ath_print to ath_dbg
Remove ath/debug.h and the includes of these files.
Coalesce long formats.
Correct a few misspellings and missing "\n"s from these logging messages.
Remove unnecessary trailing space before a newline.
Remove ARRAY_SIZE casts, use printf type %zu
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 3800276a40751539a920ef8e0537ef2e19126799 |
|
03-Dec-2010 |
Joe Perches <joe@perches.com> |
ath: Convert ath_print(.., ATH_DBG_FATAL to ath_err
So these errors are always emitted at KERN_ERR level.
Remove ARRAY_SIZE casts, use printf type %zu
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9cf13668a5f8165a81349defc5f82c57a4a8279b |
|
20-Sep-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: Fix beacon distribution in IBSS mode
This patch ensures fair beacon distribution in IBSS mode
by configuring proper CWmin based on slot time.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| e8c35a77e3408171852bde4914b650cf5b83e0d1 |
|
12-Jun-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_htc: use common WMM AC definitions instead of ath9k ones
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 764580f577a46adce6ad6717a9b34aa8e3a09159 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix fair beacon distribution
This patch fixes beacon distribution in IBSS mode
by configuring the hardware beacon queue properly.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9c6dda4e2dfea970a7105e3805f0195bc3079f2f |
|
06-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix beaconing in IBSS mode
The current way of managing beaconing in ad-hoc
mode has a subtle race - the beacon obtained from mac80211
is freed in the SWBA handler rather than the TX
completion routine. But transmission of beacons goes
through the normal SKB queue maintained in hif_usb,
leading to a situation where __skb_dequeue() in the TX
completion handler goes kaput.
Fix this by simply getting a beacon from mac80211 for
every SWBA and free it in its completion routine.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 7f1f5a0060e377ff6a15903487b39223e12b8568 |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix sparse endian warnings
This patch fixes a bunch of endian issues that
were exposed by sparse. It's a miracle that the driver
worked at all till now.
The Lord be praised.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| fcb9392ff7ccb010818f3609420fd5416f6ca22e |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Cleanup beacon configuration
This patch cleans up beacon configuration,
removing a redundant interface type check
and updating beacon interval in the correct place.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 1c3652a5732879263aeebe606ca7af9e66fe0b2f |
|
05-Apr-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Configure the beacon timers once the scan is completed.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| fb9987d0f748c983bb795a86f47522313f701a08 |
|
17-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Support for AR9271 chipset.
Features:
* Station mode
* IBSS mode
* Monitor mode
* Legacy support
* HT support
* TX/RX 11n Aggregation
* HW encryption
* LED
* Suspend/Resume
For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|