| e4c2e09e1534835c749de362b9b38e2d8b286236 |
|
15-Feb-2014 |
Sebastian Reichel <sre@debian.org> |
wl1251: spi: add vio regulator support
This patch adds support for requesting the regulator powering
the vio pin.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 1d207cd30b65fdd60d952cb9e100b6f776564f06 |
|
15-Feb-2014 |
Sebastian Reichel <sre@debian.org> |
wl1251: move power GPIO handling into the driver
Move the power GPIO handling from the board code into
the driver. This is a dependency for device tree support.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| c8909e5a275bfb57dc525d6551ed572e118e2eea |
|
07-Jan-2014 |
David Gnedt <david.gnedt@davizone.at> |
wl1251: enable tx path in monitor mode if necessary for packet injection
If necessary enable the tx path in monitor mode for packet injection using
the JOIN command with BSS_TYPE_STA_BSS and zero BSSID.
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9ed74ba029fc920701cdcada8e25889a6d64a335 |
|
07-Jan-2014 |
David Gnedt <david.gnedt@davizone.at> |
wl1251: implement multicast address filtering (fwd)
Port multicast address filtering from wl1271 driver.
It sets up the hardware multicast address filter in configure_filter() with
addresses supplied through prepare_multicast().
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4d09b5378defd4ef685f9d33e0d35b380109eafa |
|
07-Jan-2014 |
David Gnedt <david.gnedt@davizone.at> |
wl1251: configure hardware en-/decryption for monitor mode
Disable hardware encryption (DF_ENCRYPTION_DISABLE) and decryption
(DF_SNIFF_MODE_ENABLE) via wl1251_acx_feature_cfg while monitor interface is
present.
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| f7ad1eed4d4b9d5f0b7ada151d5670e7cb33a6e7 |
|
07-Jan-2014 |
David Gnedt <david.gnedt@davizone.at> |
wl1251: retry power save entry
Port of the power save entry retry code from wl1251 driver version included
in the Maemo Fremantle kernel.
This tries to enable power save mode up to 3 times before failing.
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9f55c6201354183345fa06c6986668d159b6507f |
|
02-Oct-2013 |
Felipe Balbi <balbi@ti.com> |
net: wireless: wl1251: update firmware path
TI firmwares are located under ti-connectivity
directory. Update path to make sure driver can
find and load firmware blob.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 7e05bedca084faa073c2e64bbcd6407dbaff3151 |
|
16-Jun-2012 |
Grazvydas Ignotas <notasas@gmail.com> |
wl1251: remove unused filter_work
filter_work is never used, remove it.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 90921014608d91a03766d0025fa32662dc7c5062 |
|
20-Nov-2011 |
Luciano Coelho <coelho@ti.com> |
wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectory
Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti
directory. Add a TI WLAN Kconfig option and Makefile to support this
change.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Cc: John W. Linville <linville@tuxdriver.com>
|