| 936c50dd0605d7d81772f53700ef42f45525ffad |
|
11-Jul-2014 |
Eliad Peller <eliad@wizery.com> |
wlcore: add smart config definitions
Add definitions for the smart config commands.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 633e27132625a0692440c4db58b901fb3cb67c55 |
|
06-Feb-2014 |
David Spinadel <david.spinadel@intel.com> |
mac80211: split sched scan IEs
Split sched scan IEs to band specific and not band specific
blocks. Common IEs blocks may be sent to the FW once per command,
instead of per band.
This allows optimization of size of the command, which may be
required by some drivers (eg. iwlmvm with newer firmware version).
As this changes the mac80211 API, update all drivers to use the
new version correctly, even if they don't (yet) make use of the
split data.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| 5b07d97a381508dfc79bda72778ac27c1bdba320 |
|
10-Feb-2014 |
Yaniv Machani <yanivma@ti.com> |
wlcore: increase timeout to 5000 msecs
dfs configuration command might take longer than
the current timeout. increase it to 5 seconds.
Signed-off-by: Yaniv Machani <yanivma@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 028e7243ac411c3aba7a754bcc775c2fbb0b3e5c |
|
10-Feb-2014 |
Eliad Peller <eliad@wizery.com> |
wl18xx: move to new firmware (wl18xx-fw-3.bin)
Bump the min wl18xx fw version to 8.8.0.0.13
This fw is not backward compatible with older
firmware (due to api changes), so use bump
the firmware name as well.
Some modifications were done to the driver-fw api
in order to support multiple APs.
Additionally, some of the consts (such as max stations,
max links and max RX BA sessions) were changed.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4b6741443264d20aa7a1cb52185a7d13589590fe |
|
08-Sep-2013 |
Igal Chernobelsky <igalc@ti.com> |
wlcore: fix interrogate command length
Change interrogate command prototype to have command size
and returned buffer length.
This fixes the issue when command parameters are needed to
be passed to FW in addition to acx header as in the case with
get RSSI command, where role_id has to be passed.
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
| ea5084356fb05093da9ff225fd2c2fcfd363371c |
|
27-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: allow fw commands to fail
Currently, each fw command/acx that return a status code
different than CMD_STATUS_SUCCESS will trigger a recovery
in the driver.
However, it is a valid for some fw commands to fail (e.g.
due to temporary lack of resources), so add new functions
that allow passing bitmap of valid error return values.
(make the current wl1271_cmd_send/wl1271_cmd_configure
wrappers around the new functions, in order to avoid
changing the whole driver)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 6b70e7eb70cd6c5ad445ec02f74b84131a4c721a |
|
25-Nov-2012 |
Victor Goldenshtein <victorg@ti.com> |
wlcore: add new reg-domain configuration command
In 18xx the calibration process of the PHY Cortex domain
requires to perform an active calibration of the channel
before it can be used for transmission. To fulfill world
wide regulatory restrictions, fw should be always
synchronized/updated with current CRDA configuration.
Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the
fw with current reg-domain, this command passes a bit map
of channels that are allowed to be used for transmission.
The driver shall update the fw during initialization and
after each change in the current reg-domain
configuration. The driver will save the channel number of
incoming beacons during the scan process, as they might
be a result of the passive scan on
"IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the
fw accordingly once the scan is finished, the purpose of
this is to be ready in case of the authentication request
on one of these disabled (uncalibrated) channels.
The new command requires to wait for the fw completion
event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT".
No scan commands (including the sched scan) can be
executed concurrently with the "CMD_DFS_CHANNEL_CONFIG",
wl->mutex ensures that.
[Arik - move reset of reg_ch_conf_last to safe place inside
op_stop_locked]
[Eliad - adjust to new event waiting api]
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 978cd3a0b82969c1f85942e208f8a00412964ef6 |
|
22-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: save session_id per-link
A new session_id is generated on link allocation.
it is saved in a global array and used later, on tx.
The new fw api adds new bcast/global_session_id
fields to start_role(ap) command, and a new session_id
field to add_peer command. align the driver with it.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| d50529c0d8b7f03012f140349161c29b0f7bd24c |
|
22-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: pass wmm configuration to the fw
New fields were added to start_role(ap) and
set_peer_state commands, so the fw will be
able to know whether the sta/ap supports
wmm (the fw uses it in order to choose the
AC for some of its internally-generated frames)
For sta, take this value right from bss_conf->qos.
For ap, check for wmm support by looking for the
WMM IE in the configured beacon.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| c50a282515dc7092f7318708a0f3ae7ca7342b9f |
|
22-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: update events enum/struct to new fw api
The event mailbox in wl18xx has a different
(non-compatible) structure.
Create common functions in wlcore to handle the
events, and call them from the chip-specific
event mailbox parsers.
This way, each driver (wl12xx/wl18xx) extracts
the event mailbox by itself according to its
own structure, and then calls the common
wlcore functions to handle it.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| fcab189027cdd68df7f97474d1419aaa4a82130c |
|
22-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: update channel_switch/stop_channel_switch commands
Some fields were added to the channel_switch and
stop_channel_switch commands. Unfortunately,
the new 18xx channel_switch struct is not backward
compatible with the 12xx channel switch struct.
Add a new channel_switch op to wlcore, and update
the driver accordingly.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 78e28062fea51c62280cd17fe6143ed583f83ba0 |
|
22-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: split 18xx and 12xx scan mechanism
The scan APIs of 12xx and 18xx are totally different.
Use some common functions as much as possible (e.g.
for setting scan channels), but split scan.c into
chip-specific scan.c files, each implementing its
own scan mechanism.
(in other words - move most of the current wlcore's
scan.c into wl12xx, and implement a similar mechanism
in 18xx, according to the new api)
New wlcore ops are introduced in order to call the
chip-specific scan functions.
The template indices used for each scan (regular/scheduled)
are also different between the chips, so set the correct
indices used for each scan type after identifying the chip.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| e9b9d4550733dc322cd0d191e0423a480d9180ef |
|
22-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: update commands enum to new fw api
Align the commands enum with the new fw api (8.4.0.0.19)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| dabf37dba405565ab46f4d1821c781730285b9ed |
|
20-Nov-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: implement .remain_on_channel() callback
implement the reamin_on_channel() callback by starting
a dev role (already associated with the current vif)
on the requested channel/band.
This channel is usually different from the channel
of the sta role, so pass it to wl12xx_roc() as well,
and notify mac80211 (async) when the fw is ready
on the new channel.
Now, in case of offchannel tx, we should use the dev
role hlid, instead of the sta hlid.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 001e39a8effd5a9774153ca6ca67849a93b95852 |
|
16-Aug-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: use dynamic keep-alive template ids
Currently, all the (station) roles use the same
keep-alive template id (0). However, the klv
template ids shouldn't be shared by different
roles.
Implement a simple klv_templates bitmap, and let
each role allocate its own klv template id on
role initialization.
[Arik - remove invalidation of KLV template when getting into "idle".
This is already handled in unjoin]
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <luca@coelho.fi>
|
| e8c7b335faca2cbce715da3b0e1663d75d422f5b |
|
18-Jul-2012 |
Luciano Coelho <coelho@ti.com> |
wlcore: increase command completion timeout
In some rare cases, the CMD_ROC completion may take over 1 second.
The timeout had earlier been increased to 1000ms (from 750ms), but it
is still not enoug. Increase it to 1500ms.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 3df74f46d88e39a032eb2cc3f2a571b66082acba |
|
27-Jun-2012 |
Yoni Divinsky <yoni.divinsky@ti.com> |
wlcore: add probe request templates for sched and one-shot scans
The driver configures the firmware template for probe requests during
the scan process. If the same template is used for one-shot and sched
scans they will override each other when running scans simultaneously.
This fix works only on firmwares later than X.3.9.2.112 for single
role and X.3.9.2.23 for multi-role.
[Some cleaning-up and renaming of the quirk to something smaller --
Luca.]
Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| b0b09e312ad36993a9ae51993b73448c1e38fc14 |
|
13-Jun-2012 |
Yair Shapira <yair.shapira@ti.com> |
wlcore: add print logs of radio_status in case of BIP calibration
FEM BIP calibration may fail with fw/phy radio status. In order to
recognize these failures a log is added to the calibration answer
(TEST_CMD_P2G_CAL)
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 0c2129843502833c6e4117db8f312b625a23ef15 |
|
15-May-2012 |
Eliad Peller <eliad@wizery.com> |
wlcore: increase WL1271_EVENT_TIMEOUT
In some cases, the ROC_COMPLETE event might exceed the
current timeout (750 msec). Increase it to 1 sec.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| a6298dbe95b5121dfc74102e7a113001859a1335 |
|
09-May-2012 |
Arik Nemtsov <arik@wizery.com> |
wl18xx: send channel type to FW on role start
Translate the NL80211 channel type to a FW-specific channel type and send
it to the FW as part of the role-start command. For wl12xx this has no
effect - this element is treated as padding.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 9d68d1eea7fb4d05b5bd037da6a66329d640b2f1 |
|
01-Dec-2011 |
Luciano Coelho <coelho@ti.com> |
wlcore/wl12xx: add hw_init operation
Move all the wl12xx-specific hw initialization procedures into a new
hw_init op. Move some commands and ACX functions to wl12xx.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 00782136b4d6e2316e0a2a55f3b1fba160e9576e |
|
29-Nov-2011 |
Luciano Coelho <coelho@ti.com> |
wlcore/wl12xx: implement chip-specific register tables
Add register tables support in wlcore, add some new IO functions to
read and write to chip-specific register and data addresses. Move
some common register values from wl12xx to wlcore and add the
registers table to wl12xx.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| c31be25a7144ebc9b7a22128909bac7654d4c46b |
|
21-Nov-2011 |
Luciano Coelho <coelho@ti.com> |
wl12xx/wlcore: move wl1271 struct to wlcore and add ops
In order to add chip-specific operations and prepare for future
elements that need to be set by the lower driver, move the wl1271
structure to the wlcore.h file and add an empty placeholder for the
operations structure.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
| 7b3115f265de1b669b757f3802b67c9a7f146223 |
|
02-Dec-2011 |
Luciano Coelho <coelho@ti.com> |
wl12xx/wlcore: rename wl12xx to wlcore
Rename the wl12xx driver directory to wlcore as an initial step
towards the split of the driver into wlcore and wl12xx. We just
rename the directory first to keep git blame happy.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|