| 86001f248e943b7b22c22b50151ffaee9447df2d |
|
03-May-2014 |
Hiral Shah <hishah@cisco.com> |
fnic: assign FIP_ALL_FCF_MACS to fcoe_all_fcfs
1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent
to correct Mac address for VLAN Discovery otherwise VLAN request will be
sent to invalid address hence FLOGI never happens.
2) Simplify the copy_and_format_trace_data code and log the correct Link event
for fnic control path tracing in case of link status UP->UP.
3) Increment Fnic driver version
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
| abb14148c0f850e7201efc3e7aea1762f993606b |
|
18-Apr-2014 |
Hiral Shah <hishah@cisco.com> |
fnic: fnic Control Path Trace Utility
Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic
driver to trace the control path frames like discovery, FLOGI request/reply,
PLOGI request/reply, link event etc. It will be one trace file for all fnics.
It will help us to debug and resolve the discovery and initialization related
issues in more convenient way. This trace information includes time stamp,
Host Number, Frame type, Frame Length and Frame. By default,64 pages are
allocated but we can change the number of allocated pages by module parameter
fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are
depends on allocated number of pages. We can turn on or off the fnic control
path trace functionality by module paramter fc_trace_enable and/or reset the
trace contain by module paramter fc_trace_clear.
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
| c8ff03c6da96850e19fcaf359d1ae408308ad9d0 |
|
18-Apr-2014 |
Hiral Shah <hishah@cisco.com> |
fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle count
This patch contains following three minor fixes.
1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not
expected, setting the internal fip state to Non FIP mode explicitly, avoids
sending FIP frame.
2) When target goes offline, all outstanding IOs belong to the target will be
terminated by driver, If the termination count is high, then it influences
firmware responsiveness. To improve the responsiveness, default IO throttle
count is reduced to 256.
3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF)
is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to
receiving flogi reject from switch. As CVL clears all FCFs.
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Anantha Tungarakodi <atungara@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
| 5ae303443094ab49fca41cf331d5af189995bead |
|
13-Sep-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: Incremented driver version
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 67125b0287a9e6506c4f5afca7376667bf6dab5b |
|
13-Sep-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: Fnic Statistics Collection
This feature gathers active and cumulative per fnic stats for io,
abort, terminate, reset, vlan discovery path and it also includes
various important stats for debugging issues. It also provided
debugfs and ioctl interface for user to retrieve these stats.
It also provides functionality to reset cumulative stats through
user interface.
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| fc85799ee362e3ef13b8f2f5c687101490aaaa7e |
|
09-Sep-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: fnic Driver Tuneables Exposed through CLI
Introduced module params to provide dynamic way of configuring
queue depth.
Added support to get max io throttle count through UCSM to
configure maximum outstanding IOs supported by fnic and push
that value to scsi mid-layer.
Supported IO throttle values:
UCSM IO THROTTLE VALUE FNIC MAX OUTSTANDING IOS
------------------------------------------------------
16 (Default) 2048
<= 256 256
> 256 <ucsm value>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 1adee040114461787c031a792a9392a8b4866fc3 |
|
09-Sep-2013 |
Narsimhulu Musini <nmusini@cisco.com> |
[SCSI] fnic: FC stat param seconds_since_last_reset not getting updated
Code to reset fc_host statistics.
echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats,
the code also issues command to fnic firmware to clear vnic stats.
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| e09056b25c38357df5c01985a0b3af608bccbfc0 |
|
23-Jul-2013 |
Chris Leech <cleech@redhat.com> |
[SCSI] fnic: BUG: sleeping function called from invalid context during probe
I hit this during driver probe with the latest fnic updates (this trace
is from a backport into a distro kernel, but the issue is the same).
> BUG: sleeping function called from invalid context at mm/slab.c:3113
> in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu
> INFO: lockdep is turned off.
> irq event stamp: 0
> hardirqs last enabled at (0): [<(null)>] (null)
> hardirqs last disabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last enabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last disabled at (0): [<(null)>] (null)
> Pid: 610, comm: work_for_cpu Not tainted
> Call Trace:
> [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0
> [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130
> [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0
> [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
> [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
> [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic]
> [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic]
> [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30
> [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20
> [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30
> [<ffffffff8109cdc6>] ? kthread+0x96/0xa0
> [<ffffffff8100c1ca>] ? child_rip+0xa/0x20
> [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40
> [<ffffffff8100bb10>] ? restore_args+0x0/0x30
> [<ffffffff8109cd30>] ? kthread+0x0/0xa0
> [<ffffffff8100c1c0>] ? child_rip+0x0/0x20
The problem is in this hunk of "FIP VLAN Discovery Feature Support"
(d3c995f1dcf938f1084388d92b8fb97bec366566)
create_singlethreaded_workqueue cannot be called with irqs disabled
@@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev
*pdev,
vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
+ fnic->set_vlan = fnic_set_vlan;
fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO);
+ setup_timer(&fnic->fip_timer, fnic_fip_notify_timer,
+ (unsigned long)fnic);
+ spin_lock_init(&fnic->vlans_lock);
+ INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame);
+ INIT_WORK(&fnic->event_work, fnic_handle_event);
+ skb_queue_head_init(&fnic->fip_frame_queue);
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ if (!fnic_fip_queue) {
+ fnic_fip_queue =
+ create_singlethread_workqueue("fnic_fip_q");
+ if (!fnic_fip_queue) {
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+ printk(KERN_ERR PFX "fnic FIP work queue "
+ "create failed\n");
+ err = -ENOMEM;
+ goto err_out_free_max_pool;
+ }
+ }
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+ INIT_LIST_HEAD(&fnic->evlist);
+ INIT_LIST_HEAD(&fnic->vlans);
} else {
shost_printk(KERN_INFO, fnic->lport->host,
"firmware uses non-FIP mode\n");
The attempts to make fnic_fip_queue a single instance for the driver
while it's being created in probe look awkward anyway, why is this not
created in fnic_init_module like the event workqueue?
Signed-off-by: Chris Leech <cleech@redhat.com>
Tested-by: Anantha Tungarakodi <atungara@cisco.com>
Acked-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 62271dbda7e83ea7c492c1a2c45bf5e02b072b40 |
|
26-Feb-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: Incremented driver version
Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| d3c995f1dcf938f1084388d92b8fb97bec366566 |
|
26-Feb-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: FIP VLAN Discovery Feature Support
FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.
If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.
An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.
The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.
All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.
Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN. Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.
[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release. Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.
[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: Anantha Prakash T <atungara@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 4d7007b49d523d8f954ae047118d82c130f673ce |
|
13-Feb-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: Fnic Trace Utility
Fnic Trace utility is a tracing functionality built directly into fnic driver
to trace events. The benefit that trace buffer brings to fnic driver is the
ability to see what it happening inside the fnic driver. It also provides the
capability to trace every IO event inside fnic driver to debug panics, hangs
and potentially IO corruption issues. This feature makes it easy to find
problems in fnic driver and it also helps in tracking down strange bugs in a
more manageable way. Trace buffer is shared across all fnic instances for
this implementation.
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 14eb5d905d16ecd33e5e3113eb44cfa2bb47e7d7 |
|
13-Feb-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: New debug flags and debug log messages
Added new fnic debug flags for identifying IO state at every stage of IO while
debugging and also added more log messages for better debugging capability.
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| a0bf1ca27b644c1c4b1f0ea2d81f99471b2549e8 |
|
13-Feb-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: fnic driver may hit BUG_ON on device reset
The issue was observed when LUN Reset is issued through IOCTL or sg_reset
utility.
fnic driver issues LUN RESET to firmware. On successful completion of device
reset, driver cleans up all the pending IOs that were issued prior to device
reset. These pending IOs are expected to be in ABTS_PENDING state. This works
fine, when the device reset operation resulted from midlayer, but not when
device reset was triggered from IOCTL path as the pending IOs were not in
ABTS_PENDING state. execution path hits panic if the pending IO is not in
ABTS_PENDING state.
Changes:
The fix replaces BUG_ON check in fnic_clean_pending_aborts() with marking
pending IOs as ABTS_PENDING if they were not in ABTS_PENDING state and skips
if they were already in ABTS_PENDING state. An extra check is added to validate
the abort status of the commands after a delay of 2 * E_D_TOV using a
helper function. The helper function returns 1 if it finds any pending IO in
ABTS_PENDING state, belong to the LUN on which device reset was issued else 0.
With this, device reset operation returns success only if the helper funciton
returns 0, otherwise it returns failure.
Other changes:
- Removed code in fnic_clean_pending_aborts() that returns failure if it finds
io_req NULL, instead of returning failure added code to continue with next io
- Added device reset flags for debugging in fnic_terminate_rport_io,
fnic_rport_exch_reset, and fnic_clean_pending_aborts
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 03298552cba38f7c805ed338826dc76c405465c7 |
|
13-Feb-2013 |
Hiral Patel <hiralpat@cisco.com> |
[SCSI] fnic: fixing issues in device and firmware reset code
1. Handling overlapped firmware resets
This fix serialize multiple firmware resets to avoid situation where fnic
device fails to come up for link up event, when firmware resets are issued
back to back. If there are overlapped firmware resets are issued,
the firmware reset operation checks whether there is any firmware reset in
progress, if so it polls for its completion in a loop with 100ms delay.
2. Handling device reset timeout
fnic_device_reset code has been modified to handle Device reset timeout:
- Issue terminate on device reset timeout.
- Introduced flags field (one of the scratch fields in scsi_cmnd).
With this, device reset request would have DEVICE_RESET flag set for other
routines to determine the type of the request.
Also modified fnic_terminate_rport_io, fnic_rport_exch_rset, completion
routines to handle SCSI commands with DEVICE_RESET flag.
3. LUN/Device Reset hangs when issued through IOCTL using utilities like
sg_reset.
Each SCSI command is associated with a valid tag, fnic uses this tag to
retrieve associated scsi command on completion. the LUN/Device Reset issued
through IOCTL resulting into a SCSI command that is not associated with a
valid tag. So fnic fails to retrieve associated scsi command on completion,
which causes hang. This fix allocates tag, associates it with the
scsi command and frees the tag, when the operation completed.
4. Preventing IOs during firmware reset.
Current fnic implementation allows IO submissions during firmware reset.
This fix synchronizes IO submissions and firmware reset operations.
It ensures that IOs issued to fnic prior to reset will be issued to the
firmware before firmware reset.
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 0c79c74272b25bbcfb0149d5a4627ed768795d2d |
|
14-Jun-2011 |
Abhijeet Joglekar <abjoglek@cisco.com> |
[SCSI] fnic: fix incorrect use of SLAB_CACHE_DMA flag
Driver was incorrectly using the SLAB_CACHE_DMA flag when creating a cache
for SGLs. fnic device does not have 24-bit DMA restrictions. Remove the flag
and allocations from ZONE_DMA.
Thanks to Roland Dreier and David Rientjes for pointing out the bug.
Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 6da92d3463cd60f5b804475f70f659dc07331929 |
|
29-Jan-2011 |
Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com> |
[SCSI] fnic: Bumping up fnic version from 1.4.0.145 to 1.5.0.1.
Signed-off-by: Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| f281233d3eba15fb225d21ae2e228fd4553d824a |
|
16-Nov-2010 |
Jeff Garzik <jeff@garzik.org> |
SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.
The patch below presents a simple SCSI host lock push-down as an
equivalent transformation. No locking or other behavior should change
with this patch. All existing bugs and locking orders are preserved.
Additionally, add one parameter to queuecommand,
struct Scsi_Host *
and remove one parameter from queuecommand,
void (*done)(struct scsi_cmnd *)
Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.
Minimal code disturbance was attempted with this change. Most drivers
needed only two one-line modifications for their host lock push-down.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| a737b88df8d0b4476ae53daaa6db137df0541203 |
|
11-Aug-2010 |
Andrew Morton <akpm@linux-foundation.org> |
scsi: remove private BIT macros
A couple of scsi drivers define a BIT() macro, duplicating the one in
bitops.h.
Cc: Jing Huang <huangj@brocade.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| da87bfab8a7e6cfd0e1e5c5874d7fd4f7d11e64e |
|
09-Apr-2010 |
Vasu Dev <vasu.dev@intel.com> |
[SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.
No reason to restrict CDB size to 12 bytes in fcoe, so
increased to 16 so that 16 bytes SCSI CDB doesn't fail.
Uses common define to set max_cmd_len for fcoe and fnic,
fnic is already setting max_cmd_len to 16.
sg_readcap -l fails without this fix.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 666d07646a29040e3dc4caeb679166559e152ff2 |
|
09-Apr-2010 |
Brian Uchino <buchino@cisco.com> |
[SCSI] fnic: Update version to 1.4.0.145
New fnic version to mark inclusion of tx_flush bugfix.
Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| f90f50d7c530793c9c705a8f7fa3deb01714f21a |
|
16-Feb-2010 |
Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com> |
[SCSI] fnic: Set fnic driver version
Update fnic driver version.
Signed-off-by: Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 78112e5558064cb4d2e355aed87b2036fcdfe3dd |
|
03-Nov-2009 |
Joe Eykholt <jeykholt@cisco.com> |
[SCSI] fnic: Add FIP support to the fnic driver
Use libfcoe as a common FIP implementation with fcoe.
FIP or non-FIP mode is fully automatic if the firmware
supports and enables it.
Even if FIP is not supported, this uses libfcoe for the non-FIP
handling of FLOGI and its response.
Use the new lport_set_port_id() notification to capture
successful FLOGI responses and port_id resets.
While transitioning between Ethernet and FC mode, all rx and
tx FC frames are queued. In Ethernet mode, all frames are
passed to the exchange manager to capture FLOGI responses.
Change to set data_src_addr to the ctl_src_addr whenever it
would have previously been zero because we're not logged in.
This seems safer so we'll never send a frame with a 0 source MAC.
This also eliminates a special case for sending FLOGI frames.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| f9bdc3da4c9c2af4886bc6a562effc05cbf75234 |
|
22-Oct-2009 |
Abhijeet Joglekar <abjoglek@cisco.com> |
[SCSI] fnic: Set max_cmd_len to driver supported CDB length
Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 5df6d737dd4b0fe9eccf943abb3677cfea05a6c4 |
|
18-Apr-2009 |
Abhijeet Joglekar <abjoglek@cisco.com> |
[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA
fnic is a driver for the Cisco PCI-Express FCoE HBA
Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|