| 848879340a7d220fd9801396eba82ecac2f2a739 |
|
16-Sep-2014 |
Thomas Pugliese <thomas.pugliese@gmail.com> |
uwb: create a uwb bus type and add in-range peer devices to it
Documentation/usb/WUSB-Design-overview.txt states that UWB devices seen
by a UWB radio controller are added to /sys/bus/uwb/devices, but this
was not actually being done. This functionality is needed in order for
UWB peer devices to be enumerated by user mode tools. This patch
creates a uwb bus type and adds UWB peer devices to it as they are
discovered by the radio controller.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| e53582bbb53c91342f0a80add9c689e75cd9b564 |
|
16-Sep-2014 |
Thomas Pugliese <thomas.pugliese@gmail.com> |
uwb: update uwb device prints to be more useful
Print info about the radio controller device instead of the its parent
when UWB devices connect and disconnect.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 675f0ab2fe5a0f7325208e60b617a5f32b86d72c |
|
07-Aug-2014 |
Thomas Pugliese <thomas.pugliese@gmail.com> |
uwb: init beacon cache entry before registering uwb device
Make sure the uwb_dev->bce entry is set before calling uwb_dev_add in
uwbd_dev_onair so that usermode will only see the device after it is
properly initialized. This fixes a kernel panic that can occur if
usermode tries to access the IEs sysfs attribute of a UWB device before
the driver has had a chance to set the beacon cache entry.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 2fc74ac22751922f075f7e1ffda10daf88fe20fb |
|
20-Oct-2013 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
UWB: clean up attribute use by using ATTRIBUTE_GROUPS()
The ATTRIBUTE_GROUPS() macro can be used in the uwb code to reduce the
number of lines of code.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 02aa2a37636c8fa4fb9322d91be46ff8225b7de0 |
|
04-Jul-2013 |
Kees Cook <keescook@chromium.org> |
drivers: avoid format string in dev_set_name
Calling dev_set_name with a single paramter causes it to be handled as a
format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents,
including wrappers like device_create*() and bdi_register().
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 475c0a6b2cff037ca522d3aff839024ab30ed7eb |
|
10-Jul-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
uwb: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
These macros are no longer in module.h and module.h is no longer
present everywhere. Call out export.h for the real users who
are making use of these macros, or else we'll get things like:
CC drivers/uwb/umc-drv.o
drivers/uwb/umc-dev.c:42: warning: data definition has no type or storage class
drivers/uwb/umc-dev.c:42: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’
drivers/uwb/umc-dev.c:42: warning: parameter names (without types) in function declaration
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
| 0b992080a98fa6f0722c43060819f7c311203a1c |
|
17-Jul-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
drivers/uwb: fix implicit use of stat.h
The module.h (via device.h) was pulling handfuls of implicitly present
header files -- including basic stuff like stat.h. Fix up these stat.h
users in advance so they don't break on the cleanup.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
| 5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
| a4dbd6740df0872cdf0a86841f75beec8381964d |
|
24-Jun-2009 |
David Brownell <dbrownell@users.sourceforge.net> |
driver model: constify attribute groups
Let attribute group vectors be declared "const". We'd
like to let most attribute metadata live in read-only
sections... this is a start.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 3af373021fa32f8f787bfbdcc1a9277a287bde4e |
|
23-Dec-2008 |
Stefano Panella <stefano.panella@csr.com> |
uwb: remove beacon cache entry after calling uwb_notify()
Removing the beacon cache entry from a uwb_dev can cause an oops if the
bce is released before the call to uwb_notify().
Signed-off-by: Stefano Panella <stefano.panella@csr.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
|
| bce83697c5fe84a7a5d38c96fbbe43b4bc028c3e |
|
22-Dec-2008 |
David Vrabel <david.vrabel@csr.com> |
uwb: use dev_dbg() for debug messages
Instead of the home-grown d_fnstart(), d_fnend() and d_printf() macros,
use dev_dbg() or remove the message entirely.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
|
| 92c4d9bd1648b3eaca6b8b8f8932eec390ba7327 |
|
15-Oct-2008 |
David Vrabel <dv02@dv02pc01.europe.root.pri> |
uwb: use kcalloc where appropriate
Signed-off-by: David Vrabel <david.vrabel@csr.com>
|
| 183b9b592a622a7719ee38e275fd7ff3aaf74d0d |
|
17-Sep-2008 |
Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> |
uwb: add the UWB stack (core files)
UWB device and radio controller device and event management.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
|