| 22e1b8f60f913cf71e688af9b64317b515303f4c |
|
20-Sep-2014 |
Carlo Caione <carlo@caione.org> |
ARM: meson: add watchdog driver
This patch adds the watchdog driver for the Amlogic Meson SoCs used also
to reboot the device.
Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 5e9c16e3760893b3721f599f180795ca7160afef |
|
28-Sep-2014 |
Krystian Garbaciak <krystian.garbaciak@diasemi.com> |
watchdog: Add DA9063 PMIC watchdog driver.
This driver supports the watchdog device inside the DA9063 PMIC.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 22b1c841e31510c3124c88a13b8a7ada14e2e2d1 |
|
29-Sep-2014 |
Beniamino Galvani <b.galvani@gmail.com> |
watchdog: add driver for Ricoh RN5T618 watchdog
This adds a driver for the watchdog timer available in Ricoh RN5T618
PMIC. The device supports a programmable expiration time of 1, 8, 32
or 128 seconds.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 1094ebe9d1e1dde0754ff8cede16159fb20b2f3b |
|
26-Sep-2014 |
Josh Cartwright <joshc@codeaurora.org> |
watchdog: qcom: add support for KPSS WDT
Add a driver for the watchdog timer block found in the Krait Processor
Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 58bf016426594e5370e7e7059698a278294db997 |
|
22-Aug-2014 |
Harini Katakam <harinik@xilinx.com> |
watchdog: Add Cadence WDT driver
Add Cadence WDT driver. This is used by Xilinx Zynq.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 5033263992eece84e19946d2cab940c86ec862ba |
|
27-Aug-2014 |
Andreas Werner <andreas.werner@men.de> |
watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver
Added driver to support the 14F021P00 BMC Watchdog.
The BMC is a Board Management Controller including watchdog functionality.
Signed-off-by: Andreas Werner <andreas.werner@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
| 87a1ef8058d9ab26bc289ea4f27bc3c11ce9acb8 |
|
15-Apr-2014 |
David Cohen <david.a.cohen@linux.intel.com> |
watchdog: add Intel MID watchdog driver support
Add initial Intel MID watchdog driver support.
This driver is an initial implementation of generic Intel MID watchdog
driver. Currently it supports Intel Merrifield platform.
Signed-off-by: Eric Ernst <eric.ernst@intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 7285fae9345e030c6e215a9a4e5fe69b8db92bb5 |
|
05-Apr-2014 |
Guenter Roeck <linux@roeck-us.net> |
watchdog: Remove drivers for W83697HF and W83697UG
Since both chips are now supported by the w83627hf watchdog driver,
the chip specific drivers are no longer needed and can be removed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| f7a94db4e9594fd4b67e715d7b26864b7bd74a75 |
|
05-Jun-2014 |
Philipp Hachtmann <phacht@de.ibm.com> |
s390/watchdog: use watchdog API
Converted the vmwatchdog driver to use the kernel's watchdog API.
Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
| c33a15974c1a326b0034cc2a2e73fac92ae8d001 |
|
14-Feb-2014 |
Andrew Chew <achew@nvidia.com> |
watchdog: Add tegra watchdog
Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and
later). This driver will configure one watchdog timer that will reset the
system in the case of a watchdog timeout.
This driver binds to the nvidia,tegra30-timer device node and gets its
register base from there.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 25134eafb05eef6dd4b6caee3a711b63ee0c3737 |
|
30-Nov-2013 |
Alexander Shiyan <shc_work@mail.ru> |
watchdog: GPIO-controlled watchdog
This patch adds a watchdog driver for devices controlled through GPIO,
(Analog Devices ADM706, Maxim MAX823, National NE555 etc).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 6adb730dc2085c16c52a2f991cc1661e4a7fd6d5 |
|
22-Nov-2013 |
Markus Mayer <markus.mayer@linaro.org> |
watchdog: bcm281xx: Watchdog Driver
This commit adds support for the watchdog timer used on the BCM281xx
family of SoCs.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| f0fcbdbf202e2be36c8eb6d1f5c01f95805777de |
|
02-Oct-2013 |
Xianglong Du <Xianglong.Du@csr.com> |
watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI
On CSR SiRFprimaII and SiRFatlasVI, the 6th timer can act as a watchdog
timer when the Watchdog mode is enabled.
watchdog occur when TIMER watchdog counter matches the value software
pre-set, when this event occurs, the effect is the same as the system
software reset.
Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Cc: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 473cf939ff3442dc86d531f3bb152a2f129ea9d1 |
|
08-Aug-2013 |
John Crispin <blogic@openwrt.org> |
watchdog: add ralink watchdog driver
Add a driver for the watchdog timer found on Ralink SoC
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
|
| e14538e0db8d880291064348bda7d52ec8322675 |
|
02-Aug-2013 |
Jonas Jensen <jonas.jensen@gmail.com> |
watchdog: Add MOXA ART watchdog driver
This patch adds a watchdog driver for the main hardware watchdog timer
found on MOXA ART SoCs.
The MOXA ART SoC provides one writable timer register, restarting
the hardware once it reaches zero. The register is auto decremented
every APB clock cycle.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 1700a449fec27c1cdabd9352c0da2c6ddf0bbaea |
|
30-Aug-2013 |
Guenter Roeck <linux@roeck-us.net> |
watchdog: Drop references to H8300 architecture
Architecture is gone.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| d00680ed002649c8d06237a0abefcd89211757fd |
|
30-Jul-2013 |
Carlo Caione <carlo.caione@gmail.com> |
watchdog: sunxi: New watchdog driver for Allwinner A10/A13
This patch adds the driver for the watchdog found in the Allwinner A10 and
A13 SoCs. It has DT-support and uses the new watchdog framework.
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 26c57ef1ea35f2e7b73db5fad3c81c388d6d056a |
|
18-Jun-2013 |
Johannes Thumshirn <johannes.thumshirn@men.de> |
watchdog: New watchdog driver for MEN A21 watchdogs
This patch adds the driver for the watchdog devices found on MEN Mikro
Elektronik A21 VMEbus CPU Carrier Boards. It has DT-support and uses the
watchdog framework.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 938d0a840d0f97b627111fd038a735f3924fd987 |
|
18-Jun-2013 |
Lubomir Rintel <lkundrak@v3.sk> |
watchdog: Add Broadcom BCM2835 watchdog timer driver
This adds a driver for watchdog timer hardware present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
|
| 6e63a3a294fdf91eaaac1061a9c7a5f53d16ac25 |
|
19-Jun-2013 |
Viresh Kumar <viresh.kumar@linaro.org> |
watchdog: delete mpcore_wdt driver
Interrupt request doesn't use the right API: The TWD watchdog uses a per-cpu
interrupt (usually interrupt #30), and the GIC configuration should flag it as
such. With this setup, request_irq() should fail, and the right API is
request_percpu_irq(), together with enable_percpu_irq()/disable_percpu_irq().
Nothing ensures the userspace ioctl() will end-up kicking the watchdog on the
right CPU.
There are no users of this driver since a long time and it makes more sense to
get rid of it as nobody is looking to fix it.
In case somebody wakes up after this has been removed and needs it, please
revert this driver and pick these updates (These were never pushed to mainline):
http://comments.gmane.org/gmane.linux.ports.arm.kernel/245998
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| e51c288ea15b13c7d9982251c8397853f7cfb18f |
|
24-Jun-2013 |
Kevin Strasser <kevin.strasser@linux.intel.com> |
watchdog: Kontron PLD watchdog timer driver
Add watchdog timer support for the on-board PLD found on some Kontron
embedded modules.
Originally-From: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
| e4504daba1d9391968df4698406bb81318b340a0 |
|
27-Sep-2011 |
Wolfram Sang <w.sang@pengutronix.de> |
watchdog: remove old STMP3xxx driver
Now that the new driver is in place, we can remove the old one.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| de6303ab934b1386cad1f62ea6e2200ab7be7d78 |
|
27-Sep-2011 |
Wolfram Sang <w.sang@pengutronix.de> |
watchdog: add new driver for STMP3xxx and i.MX23/28
Replace the existing STMP3xxx driver because it has enough drawbacks
that a rewrite is apropriate. The new driver is designed to use the
watchdog framework which makes it a lot smaller and avoids open coding
the watchdog API again. It also uses now an explicitly exported function
from the RTC driver to set up its registers (the old driver silently
reused the hopefully(!) already remapped RTC registers). Also, this
driver is mach independent, while the old one depends on a mach replaced
by another one a year ago. Since the user interface is still the
standard watchdog API, users don't need to adapt.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 3d3a6d18abc66ba38e554fd5cb5991dfa805cd23 |
|
27-Dec-2012 |
Aaro Koskinen <aaro.koskinen@iki.fi> |
watchdog: introduce retu_wdt driver
Introduce Retu watchdog driver.
Cc: linux-watchdog@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| f0e5bd412fde30de3839c8dfa93a3e19e71ee462 |
|
29-Jan-2013 |
Fabio Baltieri <fabio.baltieri@linaro.org> |
watchdog: Add support for ux500_wdt watchdog
This patch adds support for the ux500_wdt watchdog that is found in
ST-Ericsson Ux500 platform. The driver is based on PRCMU APIs.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
| 312b00e1c31011dd009f51a52e14a500f61f1f31 |
|
12-Oct-2012 |
Ashish Jangam <ashish.jangam@kpitcummins.com> |
watchdog: DA9055 Watchdog driver
This is the Watchdog patch for the DA9055 PMIC. This patch has got dependency on
the DA9055 MFD core.
This patch is functionally tested on SMDK6410
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 664a0d7862a6b10c709d4b4a3655fe2c59a20064 |
|
24-May-2012 |
Ashish Jangam <ashish.jangam@kpitcummins.com> |
Watchdog: DA9052/53 PMIC watchdog support
This driver adds support for the watchdog functionality provided by
the Dialog Semiconductor DA9052 PMIC chip.
Tested on samsung smdkv6410 and i.mx53 QS boards.
Signed-off-by: Anthony Olech <Anthony.Olech@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 101ce87b3bdd5352edceb5a079e765685c13dbc3 |
|
10-May-2012 |
Alexander Stein <alexander.stein@systec-electronic.com> |
watchdog: Add watchdog driver for Intel Atom E6XX
Add driver for the watchdog timer built into the
Intel Atom E6XX (TunnelCreek) processor.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 065e8238302b630046ba3621943907cf509e78dd |
|
04-Apr-2012 |
Rob Herring <rob.herring@calxeda.com> |
watchdog: remove ixp2000 driver
The platform is removed, so there are no users of this driver.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| dc3c56b703dad4aec8a9b3dd86f03a90d0c26a2d |
|
05-Dec-2011 |
Marc Vertes <marc.vertes@sigfox.com> |
watchdog: new driver for VIA chipsets
New driver for the hardware watchdog timer on VIA chipsets.
This driver uses the new watchdog framework.
PnP must be enabled in BIOS to get full control of watchdog registers.
The timer code has been added by Wim Van Sebroeck.
Tested on a Artigo A1100, VX855 chipset.
Signed-off-by: Marc Vertes <marc.vertes@sigfox.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 943ef2ec4f5f14940ea391d25bf93eb99eb2ff2a |
|
15-Nov-2011 |
Wim Van Sebroeck <wim@iguana.be> |
watchdog: adx_wdt.c: remove driver
Remove the driver (that was added in v2.6.32) since the architecture
has never been merged into mainline.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 43316044d4f64da008d6aca7d4b60771b9a24eb8 |
|
22-Jul-2011 |
Wim Van Sebroeck <wim@iguana.be> |
watchdog: WatchDog Timer Driver Core - Add basic framework
The WatchDog Timer Driver Core is a framework
that contains the common code for all watchdog-driver's.
It also introduces a watchdog device structure and the
operations that go with it.
This is the introduction of this framework. This part
supports the minimal watchdog userspace API (or with
other words: the functionality to use /dev/watchdog's
open, release and write functionality as defined in
the simplest watchdog API). Extra functionality will
follow in the next set of patches.
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
|
| e9659e69b0094ea2cc92716e2b1cd6a7db9caf2e |
|
02-Jun-2011 |
Alejandro Cabrera <aldaya@gmail.com> |
watchdog: Add Xilinx watchdog timer driver
Watchdog timer device driver for Xilinx xps_timebase_wdt compatible ip cores.
It takes watchdog timer configuration from device tree and it needs that its
parent has defined the property "clock-frecuency".
It is compatible with watchdog timer kernel API, so user apps like watchdogd
may talk with it.
Signed-off-by: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| c9353ae1c69ba13ec9d29ab4f2dae881c2c06a58 |
|
24-Jan-2011 |
Jamie Iles <jamie@jamieiles.com> |
watchdog: add support for the Synopsys DesignWare WDT
The Synopsys DesignWare watchdog is found in several ARM based systems
and provides a choice of 16 timeout periods depending on the clock
input. The watchdog cannot be disabled once started.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 2f58b8d04e680ec13157ba6eee44455438c56d5f |
|
05-May-2011 |
John Crispin <blogic@openwrt.org> |
MIPS: Lantiq: Add watchdog support
This patch adds the driver for the watchdog found inside the Lantiq SoC family.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2327/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
| 25985edcedea6396277003854657b5f3cb31a628 |
|
31-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
| 066d6c7f4ec94d40d13061714489783916548cdb |
|
04-Oct-2010 |
Jan Beulich <JBeulich@novell.com> |
watchdog: Xen watchdog driver
While the hypervisor change adding SCHEDOP_watchdog support included a
daemon to make use of the new functionality, having a kernel driver
for /dev/watchdog so that user space code doesn't need to distinguish
non-Xen and Xen seems to be preferable.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 57539c1cf9f146ab9988a350dbc2d7e69a8a5c30 |
|
02-Feb-2011 |
Donald Johnson <donald.k.johnson@intel.com> |
watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms.
This submission includes:
- Fix to intel_scu_write() to start watchdog timer the on the
first write, and refresh on subsequent writes.
This enables Open, write, write, ... usage model.
- Moves boot parameter checks from intel_scu_open() to
intel_scu_watchdog_init(), so driver init will fail if these
parameters are out of bounds.
- Adds check for whether process waiting in wait_event_interruptible()
received a signal while it was waiting.
- Other small error handling changes.
Removed the read() method for now as that wass a non-standard behaviour.
Signed-off-by: Donald Johnson <donald.k.johnson@intel.com>
Signed-off-by: Shuduo Sang <shuduo.sang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| f865c35224bb310a1b464062ae1e946d261708e3 |
|
05-Dec-2010 |
Paul Cercueil <paul@crapouillou.net> |
watchdog: add JZ4740 watchdog driver
Adds support for the hardware watchdog found in Ingenic's jz4740
System-on-Chip.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 4157a04d5d7def8661559cd98eb285a520d50075 |
|
22-Jan-2011 |
Philippe De Muyter <phdm@macqel.be> |
m68knommu: Rename m548x_wdt.c to m54xx_wdt.c
All m548x files were renamed to m54xx, except m548x_wdt.c. Fix that.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
| 88cce427626070f7d7eb33994e3ff7b4db3292c5 |
|
03-Nov-2010 |
Philippe De Muyter <phdm@macqel.be> |
watchdog: Add MCF548x watchdog driver.
Add watchdog driver for MCF548x.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| f8394f61c66f48b1fe9d6964ddce492d7f9a4cd9 |
|
04-Jan-2011 |
Gabor Juhos <juhosg@openwrt.org> |
watchdog: add driver for the Atheros AR71XX/AR724X/AR913X SoCs
This patch adds a driver for the built-in hardware watchdog device
of the Atheros AR71XX/AR724X/AR913X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 456c730153fe33134fe93742510a96e46a9217c4 |
|
26-Oct-2010 |
Mike Waychison <mikew@google.com> |
watchdog: Add TCO support for nVidia chipsets
This driver adds support for /dev/watchdog for boards using either the MCP51 or
MCP55 chipsets. These are also known as the nForce 430 and nForce 550. This
driver is likely to work on other chipsets as well, though those are the only
two that have been tested.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 15e28bf130081a574192fb934b832ac7d07739f7 |
|
26-Oct-2010 |
Priyanka Gupta <priyankag@google.com> |
watchdog: Add support for sp5100 chipset TCO
This driver adds /dev/watchdog support for the AMD sp5100 aka SB7x0 chipsets.
It follows the same conventions found in other /dev/watchdog drivers.
Signed-off-by: Priyanka Gupta <priyankag@google.com>
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| b63aa731cd9e3fed7694a99f9c233f5f4b244f03 |
|
28-Aug-2010 |
Florian Fainelli <florian@openwrt.org> |
watchdog: add support for Broadcom BCM63xx built-in watchdog
This patch adds support for the Broadcom BCM63xx SoC built-in watchdog, it
uses one of the BCM63xx hardware timer id.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 4a370278e1041d4c62719bcd773e9c620e775901 |
|
04-Aug-2010 |
Viresh KUMAR <viresh.kumar@st.com> |
watchdog: Adding support for ARM Primecell SP805 Watchdog
Technical Reference Manual can be found at:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 96cb4eb019ce3185ec0d946a74b5a2202f5067c9 |
|
01-Aug-2010 |
Giel van Schijndel <me@mortis.eu> |
watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG
Add a new watchdog driver for the Fintek F71808E and F71882FG Super I/O
controllers.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 4c076fb41ac93bc0cbd55f2a731cc31337804acb |
|
24-Jul-2010 |
David Daney <ddaney@caviumnetworks.com> |
WATCHDOG: Add watchdog driver for OCTEON SOCs
The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit.
The driver is split into two source files one for the C code and one
for assembly. Assembly is needed to handle the NMI and then print the
machine state before the reboot is triggered.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org,
Patchwork: https://patchwork.linux-mips.org/patch/1503/
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 drivers/watchdog/octeon-wdt-main.c
create mode 100644 drivers/watchdog/octeon-wdt-nmi.S
|
| bb2fd8a844d3a9209599b5fb694b30ac46a56ef0 |
|
29-Apr-2010 |
Wolfram Sang <w.sang@pengutronix.de> |
watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) processors.
This is the driver for the hardware watchdog on the Freescale IMX2 and later processors.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 66aaa7a5592c0d8ca768c77d15d561bd43f514d8 |
|
04-Feb-2010 |
Marc Zyngier <maz@misterjones.org> |
[WATCHDOG] support for max63xx watchdog timer chips
This driver adds support for the max63{69,70,71,72,73,74} family of
watchdog timer chips.
It has been tested on an Arcom Zeus (max6369).
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| c90bf2aa94c08a0f48874f64ebdeb5fe973cf02e |
|
29-Nov-2009 |
Mika Westerberg <mika.westerberg@iki.fi> |
[WATCHDOG] ep93xx: implemented watchdog timer driver for TS-72xx SBCs
Technologic Systems TS-72xx SBCs have external glue logic
CPLD which includes watchdog timer. This driver implements
kernel support for that.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| de4148f3ef54b644a181ad75a6fb4b373f2b01f0 |
|
17-Dec-2009 |
Ralf Baechle <ralf@linux-mips.org> |
MIPS: eXcite: Remove platform.
The platform has never been fully merged
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
|
| 6d5355998a757a16815d58da4a739b15a6efbfba |
|
14-Nov-2009 |
Albrecht Dreß <albrecht.dress@arcor.de> |
mpc52xx/wdt: remove obsolete old WDT implementation
Remove the old WDT implementation.
Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
| 38461c5c084ec9119f481f27629d84283733b82a |
|
23-Sep-2009 |
Thierry Reding <thierry.reding@avionic-design.de> |
[WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.
This patch adds support for the watchdog timer on Avionic Design Xanthos
boards.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 502a0106b2cc31940f690dc6693fddfd3b97cab5 |
|
27-Jul-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
[WATCHDOG] Add support for WM831x watchdog
The WM831x series of devices provide a watchdog with configurable
behaviour on timer expiry.
Currently this driver support refreshes via a register or GPIO line and
autonomous refreshes from a hardware source (eg, a clock).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 0400e3134b03336617138f9ebf2cd0f117ceef20 |
|
17-Aug-2009 |
Wan ZongShun <mcuos.com@gmail.com> |
[WATCHDOG] Add watchdog driver for NUC900
Add watchdog device driver for the Nuvoton NUC900 series SoCs.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 3a5f90002e9d08e5a6406fc650bfd838bf23bc1b |
|
21-Jul-2009 |
Denis Turischev <denis@compulab.co.il> |
[WATCHDOG] add SBC-FITPC2 watchdog driver
Add support for watchdog found on SBC-FITPC2 board.
Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| 90074dce5537e87b27125505bb89a373567a7ede |
|
05-Jun-2009 |
matthieu castet <castet.matthieu@free.fr> |
[WATCHDOG] add bcm47xx watchdog driver
This add watchdog driver for broadcom 47xx device.
It uses the ssb subsytem to access embeded watchdog device.
Because the watchdog timeout is very short (about 2s), a soft timer is used
to increase the watchdog period.
Note : A patch for exporting the ssb_watchdog_timer_set will
be submitted on next linux-mips merge. Without this patch it can't
be build as a module.
Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Tested-by: Florian Fainelli <florian@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| accde1684ff1ea607557fb7224d2dd57775117e1 |
|
03-Jun-2009 |
dmitry pervushin <dpervushin@embeddedalley.com> |
[WATCHDOG] Freescale STMP: watchdog driver
Add watchdog timer support for Freescale STMP3xxx boards
Signed-off-by: Vitaly Wool <vital@embeddedalley.com>
Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 80e45b1e9edbca746618724d5b0a31500bdb6f39 |
|
27-Mar-2009 |
Timo Kokkonen <timo.t.kokkonen@nokia.com> |
[WATCHDOG] twl4030 watchdog driver
Implementation of twl4030 watchdog driver.
Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 01480701d5cef5b3b0f8406d2eab1eaff82f9d5c |
|
06-May-2009 |
Linus Walleij <linus.walleij@stericsson.com> |
[WATCHDOG] U300 COH 901 327 watchdog driver
This patch adds support for the U300 COH 901 327 watchdog for the
U300 platform recently added to RMK:s ARM tree.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 33c050c586fec34dae36eb314bfc3a2c44654c05 |
|
05-Nov-2008 |
Daniel Laird <daniel.j.laird@nxp.com> |
[WATCHDOG] Add pnx833x_wdt
Add support for PNX833x watchdog timer.
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 3b937a7dbddbedd9457b33fcc8fa369c0c229c6e |
|
01-Jun-2009 |
Nicolas Pitre <nico@cam.org> |
[ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdt
The Orion watchdog driver is also used on Kirkwood.
Convention is to use orion5x for stuff specific to 88F5xxx Orion chips
and simply "orion" for shared stuff across SoCs including Kirkwood.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
|
| b8f75b0d79671cb53d94e4ddd1db89502a7dc90e |
|
31-Mar-2009 |
Paulius Zaleckas <paulius.zaleckas@teltonika.lt> |
[WATCHDOG] remove ARM26 sections
Removes ARM26 sections from Kconfig and Makefile, because
ARM26 is long gone.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 618efba999d0e7f4bcde93231dcb9a748223c6e3 |
|
24-Sep-2008 |
Sean MacLennan <smaclennan@pikatech.com> |
[WATCHDOG] Pika Warp appliance watchdog timer
The FPGA based watchdog timer used by the Pika Warp appliance.
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 3268b5618f387c6b78b8f8b1190d43380c8170ac |
|
10-Nov-2008 |
Martyn Welch <martyn.welch@gefanuc.com> |
[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer
GE Fanuc SBC610
Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.
This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 006948bafece27265dce72d3158b12af3ff67fce |
|
06-Nov-2008 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
[WATCHDOG] Add support for the WM8350 watchdog
This driver implements support for the watchdog functionality provided
by the Wolfson Microelectronics WM8350, a multi-function audio and
power management subsystem intended for use in embedded systems. It is
based on a driver originally written by Graeme Gregory, though it has
been extensively modified since then.
Use of a GPIO to kick the watchdog is not yet supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| 4c6e63bd177a28ca9154ae8c1bab00a387c350c4 |
|
22-Oct-2008 |
Wim Van Sebroeck <wim@iguana.be> |
[WATCHDOG] Add SMSC SCH311x Watchdog Timer.
Add a watchdog driver for the hardware watchdog timer on the
SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset.
Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 22ac92322c83334b562024414b770e48927ae963 |
|
26-Jun-2008 |
Sylver Bruneau <sylver.bruneau@googlemail.com> |
[WATCHDOG] Orion: add hardware watchdog support
This patch allows the use of the hardware watchdog in the
Marvell Orion series of ARM SoCs.
Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| e6bb42e3d669afbeb4c971994614bcf241687666 |
|
23-Jun-2008 |
Renaud CERRATO <r.cerrato@til-technologies.fr> |
[WATCHDOG] Add AT91SAM9X watchdog
Add a driver for the watchdog timer embedded into AT91SAM9X chips.
Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 7d8b09066117e3023e55964ae4626c107f437b60 |
|
17-Apr-2008 |
Flemming Frandsen <ff@nrvissing.net> |
[WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature
Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip,
found on MSI Fuzzy CX700 boards.
The method used is taken directly from the winbond datasheet and
surprisingly it differs slightly from all the other winbond watchdogs.
So far it has only been tested on the CX700 board that I have, but it
seems to work nicely.
Signed-off-by: Flemming Frandsen <ff@nrvissing.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| e1fee94f346387739e683b31815ab54dc0a30bd6 |
|
05-Mar-2008 |
Oliver Schuster <olivers137@aol.com> |
[WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
Add it87xx watchdog driver
IT8716 IT8718 IT8726 IT8712-J IT8712-K
Signed-off-by: Oliver Schuster <olivers137@aol.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 8ab0dc333eacb2249c63d1fc7c5241299fa0493f |
|
30-Aug-2008 |
David S. Miller <davem@davemloft.net> |
cpwatchdog: Move to drivers/watchdog/cpwd.c
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 957183f32e136450eb9a4b8eed52dfac46834eed |
|
30-Aug-2008 |
David S. Miller <davem@davemloft.net> |
riowatchdog: Move under drivers/watchdog
The config stuff was already in drivers/watchdog/Kconfig
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 03ec58568a3c66cac4b23ff74db95c966a1521de |
|
25-Feb-2008 |
Florian Fainelli <florian.fainelli@telecomint.eu> |
[WATCHDOG] Add support for the IDT RC32434 watchdog
Add driver for the IDT RC32434 SoC built-in watchdog.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| b3e8f2c13ae964a8889fe96a2f3f7fd7e0cfae76 |
|
25-Feb-2008 |
Florian Fainelli <florian.fainelli@telecomint.eu> |
[WATCHDOG] Add support for the built-int RDC R-321x SoC watchdog
This patch adds support for the built-in RDC R-321x SoC watchdog.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| eaa95eb6ea43e6de8bea702c13556de9a1a1195a |
|
24-Jul-2008 |
Jochen Friedrich <jochen@scram.de> |
[WATHDOG] delete unused driver mpc8xx_wdt.c
The watchdog driver mpc8xx_wdt.c was a device interface to
arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is
gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware
is supported by mpc8xxx_wdt.c.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| d6efcab8a394c6493ccc2fcaf23c5dc0a16f052d |
|
08-Aug-2008 |
Jean Delvare <khali@linux-fr.org> |
[WATCHDOG] Fix build with CONFIG_ITCO_VENDOR_SUPPORT=n
The problem is that iTCO_vendor_support.ko is still being built while
iTCO_vendor.h claims that its functions do not exist. The following
Makefile update fixes that. It causes iTCO_vendor_support.ko to no
longer be built if CONFIG_ITCO_VENDOR_SUPPORT=n.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 7944d3a5a70ee5c1904ed1e8b1d71ff0af2854d9 |
|
06-Aug-2008 |
Wim Van Sebroeck <wim@iguana.be> |
[WATCHDOG] more coding style clean-up's
More coding style clean-up's.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 28acd02f9f9efe44718de3bbe8be22d6dfb7e47f |
|
04-Jul-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
[WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt
Rename the driver because now we support some MPC86xx processors.
There are no changes to the mpc83xx_wdt.c file, yet. When possible, we do
file renames and changes separately (because Linus once asked so, because
it helps git to track the renamed files).
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| f606ddf42fd4edc558eeb48bfee66d2c591571d2 |
|
24-Jul-2008 |
Adrian Bunk <bunk@kernel.org> |
remove the v850 port
Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.
There also seems to be noone willing to bring this port back into a usable
state.
This patch therefore removes the v850 port.
If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 63842cccb285259345f52025ef57bdfd79657a2d |
|
24-Jun-2008 |
Wim Van Sebroeck <wim@iguana.be> |
Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"
After Linus fixed the inline assembly, the CFLAGS option is not
needed anymore.
Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 4dc7347a3b4a76705b7fd00b271847dd10cf5a32 |
|
12-Jun-2008 |
Thomas Mingarelli <Thomas.Mingarelli@hp.com> |
[WATCHDOG] hpwdt: Add CFLAGS to get driver working
To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile.
Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 0b36086b5d7c397a128784bed6e332418e500af1 |
|
21-Jan-2008 |
Jordan Crouse <jordan.crouse@amd.com> |
[WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers
Add a watchdog timer based on the MFGPT timers in the CS5535/CS5536
companion chips to the AMD Geode GX and LX processors. Only caveat
is that the BIOS must provide at least a one free timer, and most
do not.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 7f4da4745c34287938ce76b92b23409adeecb5b8 |
|
04-Dec-2007 |
Thomas Mingarelli <thomas.mingarelli@hp.com> |
[WATCHDOG] HP ProLiant WatchDog driver
Hp is providing a Hardware WatchDog Timer driver that will only work with the
specific HW Timer located in the HP ProLiant iLO 2 ASIC. The iLO 2 HW Timer
will generate a Non-maskable Interrupt (NMI) 9 seconds before physically
resetting the server, by removing power, so that the event can be logged to
the HP Integrated Management Log (IML), a Non-Volatile Random Access Memory
(NVRAM). The logging of the event is performed using the HP ProLiant ROM via
an Industry Standard access known as a BIOS Service Directory Entry.
Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 75c752e6c3147f596c13365b200b91d754b66f59 |
|
14-Dec-2007 |
Andrew Sharp <andy.sharp@onstor.com> |
[WATCHDOG] Add support for SB1 hardware watchdog
Support watchdog timers built into SiByte MIPS SoCs.
Signed-off-by: Andy Sharp <andy.sharp@onstor.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| 6f702fce387e16e16d7930b5c9927d5e71d36ece |
|
11-Nov-2007 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
[WATCHDOG] TXx9 watchdog driver
This is a driver for watchdog timer built into TXx9 MIPS SoCs.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
| c4c283357d865aad1f124c069f5f6e3f39e76790 |
|
31-Oct-2007 |
Gilles Gigan <gilles.gigan@gmail.com> |
[WATCHDOG] add Nano 7240 driver
Adds support for the built-in watchdog on EPIC Nano 7240 boards from IEI.
Tested on Nano-7240RS.
Hardware documentation of the platform (including watchdog) can be found
on the IEI website: http://www.ieiworld.com
Signed-off-by: Gilles Gigan <gilles.gigan@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| 38ff6fd2fa4959925cf217ccaebea90fabd8ce04 |
|
19-Nov-2007 |
Jorge Boncompte [DTI2] <jorge@dti2.net> |
[WATCHDOG] IT8212F watchdog driver
This patch adds support for the ITE Tech Inc. IT8712F EC-LPC Super I/O
chipset found on many Pentium III and AMD motherboards. Developed using code
from other watchdog drivers and the datasheet on ITE Tech homepage.
Signed-off-by: Jorge Boncompte <jorge@dti2.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| c283cf2c09ca1b7f1e7677bde384a8f92b1b7584 |
|
20-Sep-2007 |
Matteo Croce <technoboy85@gmail.com> |
[WATCHDOG] AR7: watchdog timer
Driver for the watchdog timer. Still doesn't reboots the machine
on some boards, but we have improved and cleaned it
Signed-off-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Nicolas Thill <nico@openwrt.org>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@akk.org>
Signed-off-by: Christer Weinigel <wingel@nano-system.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
| b7e04f8c61a46d742de23af5d7ca2b41b33e40ac |
|
17-Aug-2007 |
Wim Van Sebroeck <wim@iguana.be> |
mv watchdog tree under drivers
move watchdog tree from drivers/char/watchdog to drivers/watchdog.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|