| b8a56e17e18cca2402b390c10b8d7f3cd0f6265b |
|
30-Sep-2011 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
usb: gadget: r8a66597-udc: add support for SUDMAC
SH7757 has a USB function with internal DMA controller (SUDMAC).
This patch supports the SUDMAC. The SUDMAC is incompatible with
general-purpose DMAC. So, it doesn't use dmaengine.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| 45304e8cd9d9df07e9221551678262b390bdaaa4 |
|
07-Jul-2011 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
usb: update email address in ohci-sh and r8a66597-hcd
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| f2e9039a43b01f01cab9dfaea2cad5f304fb3343 |
|
07-Jul-2011 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
usb: r8a66597-hcd: add function for external controller
R8A66597 has the pin of WR0 and WR1. So, if one write-pin of CPU
connects to the pins, we have to change the setting of FIFOSEL
register in the controller. If we don't change the setting,
the controller cannot send the data of odd length.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 5154e9f126c1d2ee8f5f93d9954f83d82b2d5e64 |
|
08-Jul-2011 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
usb: gadget: r8a66597-udc: Make BUSWAIT configurable through platform data
BUSWAIT is a 4-bit-wide value that controls the number of access waits
from the CPU to on-chip USB module. b'0000 inserts 0 wait (2 access
cycles) and b'1111 inserts 15 waits (17 access cycles, hardware
initial value), respectively.
BUSWAIT value depends on peripheral clock frequency supplied to on-chip
of each CPU, hence should be configurable through platform data.
Note that this patch assumes that b'0000 (0 wait, 2 access cycles) is
rerely used and considered as invalid. If valid 'buswait' data is not
provided by platform, initial b'1111 (15 waits, 17 access cycles) will
be applied as a safe default.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| cf4f1e76c49dacfde0680b170b9a9b6a42f296bb |
|
22-Jul-2009 |
Magnus Damm <damm@igel.co.jp> |
usb: move r8a66597 register defines
Move r8a66597 hardware register definitions from the host
controller header file to the platform data header file.
With this change in place we can easily share register
definitions between the host controller driver and a future
gadget driver.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
| 719a72b7c75bb239ca6184190ab994b71a31c6dc |
|
17-Jul-2009 |
Magnus Damm <damm@igel.co.jp> |
usb: r8a66597-hcd platform data on_chip support
Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.
This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.
It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
| 5effabbe9e6e0089f7afdde35cb51e8c8b4cf6bc |
|
26-May-2009 |
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
USB: r8a66597-hcd: use platform_data instead of module_param
CPU/board specific parameters (PLL clock, vif etc...) can be set
by platform_data instead of module_param.
v2: remove irq_sense member in platform_data because it can OR in
IRQF_TRIGGER_LOW or IRQF_TRIGGER_FALLING against IORESOURCE_IRQ in
the struct resource.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|