| 1f9248e5606afc6485255e38ad57bdac08fa7711 |
|
07-Dec-2013 |
Jiri Pirko <jiri@resnulli.us> |
neigh: convert parms to an array
This patch converts the neigh param members to an array. This allows easier
manipulation which will be needed later on to provide better management of
default values.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| ece31ffd539e8e2b586b1ca5f50bc4f4591e3893 |
|
18-Feb-2013 |
Gao feng <gaofeng@cn.fujitsu.com> |
net: proc: change proc_net_remove to remove_proc_entry
proc_net_remove is only used to remove proc entries
that under /proc/net,it's not a general function for
removing proc entries of netns. if we want to remove
some proc entries which under /proc/net/stat/, we still
need to call remove_proc_entry.
this patch use remove_proc_entry to replace proc_net_remove.
we can remove proc_net_remove after this patch.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| d4beaa66add8aebf83ab16d2fde4e4de8dac36df |
|
18-Feb-2013 |
Gao feng <gaofeng@cn.fujitsu.com> |
net: proc: change proc_net_fops_create to proc_create
Right now, some modules such as bonding use proc_create
to create proc entries under /proc/net/, and other modules
such as ipv4 use proc_net_fops_create.
It looks a little chaos.this patch changes all of
proc_net_fops_create to proc_create. we can remove
proc_net_fops_create after this patch.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| daaba4fa17d7826807b0b131f796543b4099ef4a |
|
09-Feb-2013 |
YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> |
net neighbour, decnet: Ensure to align device private data on preferred alignment.
To allow both of protocol-specific data and device-specific data
attached with neighbour entry, and to eliminate size calculation
cost when allocating entry, sizeof protocol-speicic data must be
multiple of NEIGH_PRIV_ALIGN. On 64bit archs,
sizeof(struct dn_neigh) is multiple of NEIGH_PRIV_ALIGN, but on
32bit archs, it was not.
Introduce NEIGH_ENTRY_SPACE() macro to ensure that protocol-specific
entry-size meets our requirement.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| fccd7d5c77ff61d5283e7ce8242791d5f00dcc17 |
|
03-Jul-2012 |
David S. Miller <davem@davemloft.net> |
decnet: Use neighbours privately in dn_route struct.
This allows an easy conversion away from dst_get_neighbour*().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 5d0ba55b6486f58cc890918d7167063d83f7fbb4 |
|
04-Jun-2012 |
Eric Dumazet <edumazet@google.com> |
net: use consume_skb() in place of kfree_skb()
Remove some dropwatch/drop_monitor false positives.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| e87cc4728f0e2fb663e592a1141742b1d6c63256 |
|
13-May-2012 |
Joe Perches <joe@perches.com> |
net: Convert net_ratelimit uses to net_<level>_ratelimited
Standardize the net core ratelimited logging functions.
Coalesce formats, align arguments.
Change a printk then vprintk sequence to use printf extension %pV.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 3329bdfc4071840816d6666c6463fdb0bd4c8264 |
|
01-Feb-2012 |
David S. Miller <davem@davemloft.net> |
decnet: Add missing neigh->ha locking to dn_neigh_output_packet()
Basically, mirror the logic in neigh_connected_output().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 2c2aba6c561ac425602f4a0be61422224cb87151 |
|
28-Dec-2011 |
David S. Miller <davem@davemloft.net> |
ipv6: Use universal hash for NDISC.
In order to perform a proper universal hash on a vector of integers,
we have to use different universal hashes on each vector element.
Which means we need 4 different hash randoms for ipv6.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 2721745501a26d0dc3b88c0d2f3aa11471891388 |
|
02-Dec-2011 |
David Miller <davem@davemloft.net> |
net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.
To reflect the fact that a refrence is not obtained to the
resulting neighbour entry.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
|
| 8b5c171bb3dc0686b2647a84e990199c5faa9ef8 |
|
09-Nov-2011 |
Eric Dumazet <eric.dumazet@gmail.com> |
neigh: new unresolved queue limits
Le mercredi 09 novembre 2011 à 16:21 -0500, David Miller a écrit :
> From: David Miller <davem@davemloft.net>
> Date: Wed, 09 Nov 2011 16:16:44 -0500 (EST)
>
> > From: Eric Dumazet <eric.dumazet@gmail.com>
> > Date: Wed, 09 Nov 2011 12:14:09 +0100
> >
> >> unres_qlen is the number of frames we are able to queue per unresolved
> >> neighbour. Its default value (3) was never changed and is responsible
> >> for strange drops, especially if IP fragments are used, or multiple
> >> sessions start in parallel. Even a single tcp flow can hit this limit.
> > ...
> >
> > Ok, I've applied this, let's see what happens :-)
>
> Early answer, build fails.
>
> Please test build this patch with DECNET enabled and resubmit. The
> decnet neigh layer still refers to the removed ->queue_len member.
>
> Thanks.
Ouch, this was fixed on one machine yesterday, but not the other one I
used this morning, sorry.
[PATCH V5 net-next] neigh: new unresolved queue limits
unres_qlen is the number of frames we are able to queue per unresolved
neighbour. Its default value (3) was never changed and is responsible
for strange drops, especially if IP fragments are used, or multiple
sessions start in parallel. Even a single tcp flow can hit this limit.
$ arp -d 192.168.20.108 ; ping -c 2 -s 8000 192.168.20.108
PING 192.168.20.108 (192.168.20.108) 8000(8028) bytes of data.
8008 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.322 ms
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 60063497a95e716c9a689af3be2687d261f115b4 |
|
27-Jul-2011 |
Arun Sharma <asharma@fb.com> |
atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 69cce1d1404968f78b177a0314f5822d5afdbbfb |
|
18-Jul-2011 |
David S. Miller <davem@davemloft.net> |
net: Abstract dst->neighbour accesses behind helpers.
dst_{get,set}_neighbour()
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 8f40b161de4f27402b4c0659ad2ae83fad5a0cdd |
|
17-Jul-2011 |
David S. Miller <davem@davemloft.net> |
neigh: Pass neighbour entry to output ops.
This will get us closer to being able to do "neigh stuff"
completely independent of the underlying dst_entry for
protocols (ipv4/ipv6) that wish to do so.
We will also be able to make dst entries neigh-less.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 542d4d685febf3110d1a08d0bcb9f6ef060b76f7 |
|
17-Jul-2011 |
David S. Miller <davem@davemloft.net> |
neigh: Kill ndisc_ops->queue_xmit
It is always dev_queue_xmit().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 47ec132a40d788d45e2f088545dea68798034dab |
|
17-Jul-2011 |
David S. Miller <davem@davemloft.net> |
neigh: Kill neigh_ops->hh_output
It's always dev_queue_xmit().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 06f8fe11bb4a84de9d9faa50c7ffbe40b90d395a |
|
01-Jul-2011 |
Joe Perches <joe@perches.com> |
decnet: Reduce switch/case indent
Make the case labels the same indent as the switch.
git diff -w shows differences for line wrapping.
(fit multiple lines to 80 columns, join where possible)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| fc766e4c4965915ab52a1d1fa3c7a7b3e7bc07f0 |
|
29-Oct-2010 |
Eric Dumazet <eric.dumazet@gmail.com> |
decnet: RCU conversion and get rid of dev_base_lock
While tracking dev_base_lock users, I found decnet used it in
dnet_select_source(), but for a wrong purpose:
Writers only hold RTNL, not dev_base_lock, so readers must use RCU if
they cannot use RTNL.
Adds an rcu_head in struct dn_ifaddr and handle proper RCU management.
Adds __rcu annotation in dn_route as well.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| d6bf781712a1d25cc8987036b3a48535b331eb91 |
|
04-Oct-2010 |
Eric Dumazet <eric.dumazet@gmail.com> |
net neigh: RCU conversion of neigh hash table
David
This is the first step for RCU conversion of neigh code.
Next patches will convert hash_buckets[] and "struct neighbour" to RCU
protected objects.
Thanks
[PATCH net-next] net neigh: RCU conversion of neigh hash table
Instead of storing hash_buckets, hash_mask and hash_rnd in "struct
neigh_table", a new structure is defined :
struct neigh_hash_table {
struct neighbour **hash_buckets;
unsigned int hash_mask;
__u32 hash_rnd;
struct rcu_head rcu;
};
And "struct neigh_table" has an RCU protected pointer to such a
neigh_hash_table.
This means the signature of (*hash)() function changed: We need to add a
third parameter with the actual hash_rnd value, since this is not
anymore a neigh_table field.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
| 5d877d876cfb96c0c3254184171b4767501f4f95 |
|
23-Mar-2010 |
Jan Engelhardt <jengelh@medozas.de> |
netfilter: decnet: use NFPROTO values for NF_HOOK invocation
The semantic patch used was:
// <smpl>
@@
@@
NF_HOOK(
-PF_DECnet,
+NFPROTO_DECNET,
...)
// </smpl>
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
|
| 89d69d2b75a8f7e258f4b634cd985374cfd3202e |
|
01-Sep-2009 |
Stephen Hemminger <shemminger@vyatta.com> |
net: make neigh_ops constant
These tables are never modified at runtime. Move to read-only
section.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| adf30907d63893e4208dfe3f5c88ae12bc2f25d5 |
|
02-Jun-2009 |
Eric Dumazet <eric.dumazet@gmail.com> |
net: skb->dst accessors
Define three accessors to get/set dst attached to a skb
struct dst_entry *skb_dst(const struct sk_buff *skb)
void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
void skb_dst_drop(struct sk_buff *skb)
This one should replace occurrences of :
dst_release(skb->dst)
skb->dst = NULL;
Delete skb->dst field
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| c4106aa88a440430d387e022f2ad6dc1e0d52e98 |
|
27-Nov-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
decnet: remove private wrappers of endian helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 426b5303eb435d98b9bee37a807be386bc2b3320 |
|
24-Jan-2008 |
Eric W. Biederman <ebiederm@xmission.com> |
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces
I'm actually surprised at how much was involved. At first glance it
appears that the neighbour table data structures are already split by
network device so all that should be needed is to modify the user
interface commands to filter the set of neighbours by the network
namespace of their devices.
However a couple things turned up while I was reading through the
code. The proxy neighbour table allows entries with no network
device, and the neighbour parms are per network device (except for the
defaults) so they now need a per network namespace default.
So I updated the two structures (which surprised me) with their very
own network namespace parameter. Updated the relevant lookup and
destroy routines with a network namespace parameter and modified the
code that interacts with users to filter out neighbour table entries
for devices of other namespaces.
I'm a little concerned that we can modify and display the global table
configuration and from all network namespaces. But this appears good
enough for now.
I keep thinking modifying the neighbour table to have per network
namespace instances of each table type would should be cleaner. The
hash table is already dynamically sized so there are it is not a
limiter. The default parameter would be straight forward to take care
of. However when I look at the how the network table is built and
used I still find some assumptions that there is only a single
neighbour table for each type of table in the kernel. The netlink
operations, neigh_seq_start, the non-core network users that call
neigh_lookup. So while it might be doable it would require more
refactoring than my current approach of just doing a little extra
filtering in the code.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 31164088d72e1420e53f742b6c0c06f7343551dc |
|
10-Oct-2007 |
Pavel Emelyanov <xemul@openvz.org> |
[DECNET]: Make decnet code use the seq_open_private()
Just switch to the consolidated code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0c4e85813d0a94eeb8bf813397a4907bdd7bb610 |
|
09-Oct-2007 |
Stephen Hemminger <shemminger@linux-foundation.org> |
[NET]: Wrap netdevice hardware header creation.
Add inline for common usage of hardware header creation, and
fix bug in IPV6 mcast where the assumption about negative return is
an errno. Negative return from hard_header means not enough space
was available,(ie -N bytes).
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 457c4cbc5a3dde259d2a1f15d5f9785290397267 |
|
12-Sep-2007 |
Eric W. Biederman <ebiederm@xmission.com> |
[NET]: Make /proc/net per network namespace
This patch makes /proc/net per network namespace. It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.
Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 56b3d975bbce65f655c5612b4822da671f9fd9b2 |
|
11-Jul-2007 |
Philippe De Muyter <phdm@macqel.be> |
[NET]: Make all initialized struct seq_operations const.
Make all initialized struct seq_operations in net/ const
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| c1d2bbe1cd6c7bbdc6d532cefebb66c7efb789ce |
|
11-Apr-2007 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
[SK_BUFF]: Introduce skb_reset_network_header(skb)
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can
later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.
This one touches just the most simple case, next will handle the slightly more
"complex" cases.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 9a32144e9d7b4e21341174b1a83b82a82353be86 |
|
12-Feb-2007 |
Arjan van de Ven <arjan@linux.intel.com> |
[PATCH] mark struct file_operations const 7
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 429eb0fae6c06c9adcda03401c09c2b9ccaa7ebd |
|
09-Feb-2007 |
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> |
[NET] DECNET: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0afc46c4683df512eef34a71a85065dc555c2af2 |
|
09-Nov-2006 |
Ralf Baechle <ralf@linux-mips.org> |
[DECNET]: Don't clear memory twice.
When dn_neigh.c was converted from kmalloc to kzalloc in commit
0da974f4f303a6842516b764507e3c0a03f41e5a it was missed that
dn_neigh_seq_open was actually clearing the allocation twice was
missed.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0da974f4f303a6842516b764507e3c0a03f41e5a |
|
21-Jul-2006 |
Panagiotis Issaris <takis@issaris.org> |
[NET]: Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 6ab3d5624e172c553004ecc862bfeac16d9d68b7 |
|
30-Jun-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
| d1a649838802edd94b6335834919463c6ae61f40 |
|
04-May-2006 |
Patrick Caulfield <patrick@tykepenguin.com> |
[DECNET]: Fix level1 router hello
This patch fixes hello messages sent when a node is a level 1
router. Slightly contrary to the spec (maybe) VMS ignores hello
messages that do not name level2 routers that it also knows about.
So, here we simply name all the routers that the node knows about
rather just other level1 routers. (I hope the patch is clearer than
the description. sorry).
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| c4ea94ab3710eb2434abe2eab1a479c2dc01f8ac |
|
21-Mar-2006 |
Steven Whitehouse <steve@chygwyn.com> |
[DECnet]: Endian annotation and fixes for DECnet.
The typedef for dn_address has been removed in favour of using __le16
or __u16 directly as appropriate. All the DECnet header files are
updated accordingly.
The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed
since just about all their callers wanted network order rather than
host order, so the conversion is now done in the functions themselves.
Several missed endianess conversions have been picked up during the
conversion process. The nh_gw field in struct dn_fib_info has been
changed from a 32 bit field to 16 bits as it ought to be.
One or two cases of using htons rather than dn_htons in the routing
code have been found and fixed.
There are still a few warnings to fix, but this patch deals with the
important cases.
Signed-off-by: Steven Whitehouse <steve@chygwyn.com>
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 5062430c5cc526655e3d10c670fc9c263656f66c |
|
03-Jan-2006 |
Patrick Caulfield <patrick@tykepenguin.com> |
[DECNET]: Only use local routers
The attached patch makes DECnet routing only use routers from the same
area - rather than the highest rated router seen.
In theory there should not be an out-of-area router on a local network
but some networks are bridged rather than properly routed. VMS seems
to behave similarly: if I bring up a VMS node with no router then it
can't see anything else on the global network.
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 1f07247de51efd30c88ad8e3e06a8b5382fc7d35 |
|
17-Aug-2005 |
Paul E. McKenney <paulmck@us.ibm.com> |
[DECNET]: Fix RCU race condition in dn_neigh_construct().
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 58b82150da90681a4179db1bc94d412938e81b31 |
|
19-Jun-2005 |
Thomas Graf <tgraf@suug.ch> |
[DECNET]: Remove unnecessary initilization of unused variable entries
This patch was supposed to be part of the neighbour tables related
patchset but apparently got lost.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|