Cross Reference: /net/tipc/name

History log of /net/tipc/name_distr.c
Revision	Date	Author	Comments
0fc4dffad13e81deb3bf72e74cac292172df5285	10-Sep-2014	Erik Hugne <erik.hugne@ericsson.com>	tipc: fix sparse warnings This fixes the following sparse warnings: sparse: symbol 'tipc_update_nametbl' was not declared. Should it be static? Also, the function is changed to return bool upon success, rather than a potentially freed pointer. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
a5325ae5b8bff051933a754db7727fc9823e6414	28-Aug-2014	Erik Hugne <erik.hugne@ericsson.com>	tipc: add name distributor resiliency queue TIPC name table updates are distributed asynchronously in a cluster, entailing a risk of certain race conditions. E.g., if two nodes simultaneously issue conflicting (overlapping) publications, this may not be detected until both publications have reached a third node, in which case one of the publications will be silently dropped on that node. Hence, we end up with an inconsistent name table. In most cases this conflict is just a temporary race, e.g., one node is issuing a publication under the assumption that a previous, conflicting, publication has already been withdrawn by the other node. However, because of the (rtt related) distributed update delay, this may not yet hold true on all nodes. The symptom of this failure is a syslog message: "tipc: Cannot publish {%u,%u,%u}, overlap error". In this commit we add a resiliency queue at the receiving end of the name table distributor. When insertion of an arriving publication fails, we retain it in this queue for a short amount of time, assuming that another update will arrive very soon and clear the conflict. If so happens, we insert the publication, otherwise we drop it. The (configurable) retention value defaults to 2000 ms. Knowing from experience that the situation described above is extremely rare, there is no risk that the queue will accumulate any large number of items. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
f4ad8a4b8b9f490a15c3239e0d6ac99e7e438d34	28-Aug-2014	Erik Hugne <erik.hugne@ericsson.com>	tipc: refactor name table updates out of named packet receive routine We need to perform the same actions when processing deferred name table updates, so this functionality is moved to a separate function. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
9fbfb8b120bd4fe89cd70d6c8841e6e1cfab2609	17-Jul-2014	Jon Paul Maloy <jon.maloy@ericsson.com>	tipc: rename temporarily named functions After the previous commit, we can now give the functions with temporary names, such as tipc_link_xmit2(), tipc_msg_build2() etc., their proper names. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dbdf6d24ad37d63938f29a2d134a1a9f6e9e673c	17-Jul-2014	Jon Paul Maloy <jon.maloy@ericsson.com>	tipc: make name table distributor use new send function In a previous commit series ("tipc: new unicast transmission code") we introduced a new message sending function, tipc_link_xmit2(), and moved the unicast data users over to use that function. We now let the internal name table distributor do the same. The interaction between the name distributor and the node/link layer also becomes significantly simpler, so we can eliminate the function tipc_link_names_xmit(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ca0c42732c512a12fabe677594840f31861dd31a	05-May-2014	Ying Xue <ying.xue@windriver.com>	tipc: avoid to asynchronously deliver name tables to peer node Postpone the actions of delivering name tables until after node lock is released, avoiding to do it under asynchronous context. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
5356f3d7d48af72eb2a14b643d5563f068c44fe0	05-May-2014	Ying Xue <ying.xue@windriver.com>	tipc: always use tipc_node_lock() to hold node lock Although we obtain node lock with tipc_node_lock() in most time, there are still places where we directly use native spin lock interface to grab node lock. But as we will do more jobs in the future when node lock is released, we should ensure that tipc_node_lock() is always called when node lock is taken. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
eab8c045732635e3833a5d58b17c6da08ff71f9e	28-Apr-2014	Ying Xue <ying.xue@windriver.com>	tipc: move the delivery of named messages out of nametbl lock Commit a89778d8baf19cd7e728d81121a294a06cedaad1 ("tipc: add support for link state subscriptions") introduced below possible deadlock scenario: CPU0 CPU1 T0: tipc_publish() link_timeout() T1: tipc_nametbl_publish() [grab node lock]* T2: [grab nametbl write lock]* link_state_event() T3: named_cluster_distribute() link_activate() T4: [grab node lock]* tipc_node_link_up() T5: tipc_nametbl_publish() T6: [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the delivery of named messages via link out of name nametbl lock, the reverse order of holding locks will be eliminated, as a result, the deadlock will be killed as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
7216cd949c9bd56a4ccd952c624ab68f8c9aa0a4	21-Apr-2014	Ying Xue <ying.xue@windriver.com>	tipc: purge tipc_net_lock lock Now tipc routing hierarchy comprises the structures 'node', 'link'and 'bearer'. The whole hierarchy is protected by a big read/write lock, tipc_net_lock, to ensure that nothing is added or removed while code is accessing any of these structures. Obviously the locking policy makes node, link and bearer components closely bound together so that their relationship becomes unnecessarily complex. In the worst case, such locking policy not only has a negative influence on performance, but also it's prone to lead to deadlock occasionally. In order o decouple the complex relationship between bearer and node as well as link, the locking policy is adjusted as follows: - Bearer level RTNL lock is used on update side, and RCU is used on read side. Meanwhile, all bearer instances including broadcast bearer are saved into bearer_list array. - Node and link level All node instances are saved into two tipc_node_list and node_htable lists. The two lists are protected by node_list_lock on write side, and they are guarded with RCU lock on read side. All members in node structure including link instances are protected by node spin lock. - The relationship between bearer and node When link accesses bearer, it first needs to find the bearer with its bearer identity from the bearer_list array. When bearer accesses node, it can iterate the node_htable hash list with the node address to find the corresponding node. In the new locking policy, every component has its private locking solution and the relationship between bearer and node is very simple, that is, they can find each other with node address or bearer identity from node_htable hash list or bearer_list array. Until now above all changes have been done, so tipc_net_lock can be removed safely. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
6c7a762e70637a256229f9dc9ca793908e8bd01b	26-Mar-2014	Ying Xue <ying.xue@windriver.com>	tipc: tipc: convert node list and node hlist to RCU lists Convert tipc_node_list list and node_htable hash list to RCU lists. On read side, the two lists are protected with RCU read lock, and on update side, node_list_lock is applied to them. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
78dfb789b69f161703ef322a0c2e3e61c7f7573a	26-Mar-2014	Ying Xue <ying.xue@windriver.com>	tipc: acquire necessary locks in named_cluster_distribute routine The 'tipc_node_list' is guarded by tipc_net_lock and 'links' array defined in 'tipc_node' structure is protected by node lock as well. Without acquiring the two locks in named_cluster_distribute() a fatal oops may happen in case that a destroyed link might be got and then accessed. Therefore, above mentioned two locks must be held in named_cluster_distribute() to prevent the issue from happening accidentally. As 'links' array in node struct must be protected by node lock, we have to move the code of selecting an active link from tipc_link_xmit() to named_cluster_distribute() and then call __tipc_link_xmit() with the selected link to deliver name messages. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
247f0f3c3176c55b46cb9a20011d3d6757634815	18-Feb-2014	Ying Xue <ying.xue@windriver.com>	tipc: align tipc function names with common naming practice in the network Rename the following functions, which are shorter and more in line with common naming practice in the network subsystem. tipc_bclink_send_msg->tipc_bclink_xmit tipc_bclink_recv_pkt->tipc_bclink_rcv tipc_disc_recv_msg->tipc_disc_rcv tipc_link_send_proto_msg->tipc_link_proto_xmit link_recv_proto_msg->tipc_link_proto_rcv link_send_sections_long->tipc_link_iovec_long_xmit tipc_link_send_sections_fast->tipc_link_iovec_xmit_fast tipc_link_send_sync->tipc_link_sync_xmit tipc_link_recv_sync->tipc_link_sync_rcv tipc_link_send_buf->__tipc_link_xmit tipc_link_send->tipc_link_xmit tipc_link_send_names->tipc_link_names_xmit tipc_named_recv->tipc_named_rcv tipc_link_recv_bundle->tipc_link_bundle_rcv tipc_link_dup_send_queue->tipc_link_dup_queue_xmit link_send_long_buf->tipc_link_frag_xmit tipc_multicast->tipc_port_mcast_xmit tipc_port_recv_mcast->tipc_port_mcast_rcv tipc_port_reject_sections->tipc_port_iovec_reject tipc_port_recv_proto_msg->tipc_port_proto_rcv tipc_connect->tipc_port_connect __tipc_connect->__tipc_port_connect __tipc_disconnect->__tipc_port_disconnect tipc_disconnect->tipc_port_disconnect tipc_shutdown->tipc_port_shutdown tipc_port_recv_msg->tipc_port_rcv tipc_port_recv_sections->tipc_port_iovec_rcv release->tipc_release accept->tipc_accept bind->tipc_bind get_name->tipc_getname poll->tipc_poll send_msg->tipc_sendmsg send_packet->tipc_send_packet send_stream->tipc_send_stream recv_msg->tipc_recvmsg recv_stream->tipc_recv_stream connect->tipc_connect listen->tipc_listen shutdown->tipc_shutdown setsockopt->tipc_setsockopt getsockopt->tipc_getsockopt Above changes have no impact on current users of the functions. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4cb7d55ab4c4726c5d966d5a19e7b304345e74ca	16-Nov-2012	Ying Xue <ying.xue@windriver.com>	tipc: eliminate an unnecessary cast of node variable As the variable:node is currently defined to u32 type, it is unnecessary to cast its type to u32 again when using it. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2cf8aa19fe8bec578b707daa383ebff80e3f81a1	29-Jun-2012	Erik Hugne <erik.hugne@ericsson.com>	tipc: use standard printk shortcut macros (pr_err etc.) All messages should go directly to the kernel log. The TIPC specific error, warning, info and debug trace macro's are removed and all references replaced with pr_err, pr_warn, pr_info and pr_debug. Commonly used sub-strings are explicitly declared as a const char to reduce .text size. Note that this means the debug messages (changed to pr_debug), are now enabled through dynamic debugging, instead of a TIPC specific Kconfig option (TIPC_DEBUG). The latter will be phased out completely Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> [PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
617d3c7a50b3dc15f558d60013047aede79dc055	30-Apr-2012	Paul Gortmaker <paul.gortmaker@windriver.com>	tipc: compress out gratuitous extra carriage returns Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
1110b8d33a54d1b91131e2a70ef0c3c26425b800	17-Apr-2012	Allan Stephens <allan.stephens@windriver.com>	tipc: Update node-scope publications when network address is assigned Ensures that node-scope name publications that exist prior to the configuration of a node's network address are properly re-initialized with that address when it is assigned. TIPC's node-scope publications are now tracked using a publications list like the lists used for cluster-scope and zone-scope publications so they can be easily updated when required. The inclusion of node scope name publications in a conventional publication list means that they must now also be withdrawn, just like cluster and zone scope publications are currently withdrawn. So some conditional tests on scope ==/!= TIPC_NODE_SCOPE are inserted/removed accordingly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
a909804f7c6cb83b7365ed23e9fd4c1267ee9ef0	17-Apr-2012	Allan Stephens <allan.stephens@windriver.com>	tipc: Separate cluster-scope and zone-scope names into distinct lists Utilizes distinct lists to track zone-scope and cluster-scope names published by a node. For now, TIPC continues to process the entries in both lists in the same way; however, an upcoming patch will utilize the existence of the lists to prevent the sending of cluster-scope names to nodes that are not part of the local cluster. To achieve this, an array of publication lists is introduced, so that they can be iterated over and accessed via publ->scope as an index where convenient. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
e11aa059715e2bacd4e62d57be5557dda697af8e	17-Apr-2012	Allan Stephens <allan.stephens@windriver.com>	tipc: Factor out name publication code to a separate function This is done so that it can be reused with differing publication lists, instead of being hard coded to the cluster publicaton list. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
3f8375fee30cbf7fb0bd67f044e3406daa16fa3e	17-Apr-2012	Allan Stephens <allan.stephens@windriver.com>	tipc: introduce publication lists struct There is currently a single list that is containing both cluster-scope and zone-scope publications, and the list count is a separate free floating variable. Create a struct to bind the count to the list, and to pave the way for factoring out the publications into zone/cluster/node scope. The current "publ_root" most matches what will be the cluster scope list, so it is named accordingly in this commit. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5f6d9123f1c7ef7297b0da1620988fe16c738e75	04-Nov-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Eliminate trivial buffer manipulation helper routines Gets rid of two inlined routines that simply call existing sk_buff manipulation routines, since there is no longer any extra processing done by the helper routines. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
3175bd9add570f3b5c06877369897b334556a2ff	28-Oct-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Eliminate alteration of publication key during name table purging Removes code that alters the publication key of a name table entry that is being forcibly purged from TIPC's name table after contact with the publishing node has been lost. Current TIPC ensures that all defunct names are purged before re-establishing contact with a failed node. There used to be a risk that the publication might be accidentally deleted because it might be re-added to the name table before the purge operation was completed. But now there is no longer a need to ensure that the new key is different than the old one. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
a18c4bc3ea3c23f658655b1eee4f62cb71d51efd	30-Dec-2011	Paul Gortmaker <paul.gortmaker@windriver.com>	tipc: rename struct link* to struct tipc_link* This converts the following: struct link -> struct tipc_link struct link_req -> struct tipc_link_req struct link_name -> struct tipc_link_name Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
945af1c39df00a1e5873e38145432ba752ec49a0	14-Oct-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Eliminate useless check when network address is assigned Gets rid of an unnecessary check in the routine that updates the port id of a node's name publications when the node is assigned a network address, since the routine is only invoked if the new address is different from the existing one. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
9aa88c2a509e11e6efc466c88b386e0e01bef731	31-May-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Enhance sending of bulk name table messages Modifies the initial transfer of name table entries to a new neighboring node so that the messages are enqueued as a unit, rather than individually. The revised algorithm now locates the link carrying the message only once, and eliminates unnecessary checks for link congestion, message fragmentation, and message bundling that are not required when sending these messages. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
1c553bb52eb4c58333a843c0a5888d2329909f62	02-Sep-2011	Paul Gortmaker <paul.gortmaker@windriver.com>	tipc: relocate/coalesce node cast in tipc_named_node_up Functions like this are called using unsigned longs from function pointers. In this case, the function is passed in a node which is normally internally treated as a u32 by TIPC. Rather than add more casts into this function in the future for each added use of node within, move the cast to a single place on a local. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
149ce37c8de72c64fc4f66c1b4cf7a0fb66b7ee9	31-May-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Prevent fragmented messages during initial name table exchange Reduces the maximum size of messages sent during the initial exchange of name table information between two nodes to be no larger than the MTU of the first link established between the nodes. This ensures that messages will never need to be fragmented, which would add unnecessary overhead to the name table synchronization mechanism. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
741d9eb7b8f352071f56aacb77f5245b4e2a4fbe	31-May-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Cleanup of message header size terminology Performs cosmetic cleanup of the symbolic names used to specify TIPC payload message header sizes. The revised names now more accurately reflect the payload messages in which they can appear. In addition, several places where these payload message symbol names were being used to create non-payload messages have been updated to use the proper internal message symbolic name. No functional changes are introduced by this rework. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25985edcedea6396277003854657b5f3cb31a628	31-Mar-2011	Lucas De Marchi <lucas.demarchi@profusion.mobi>	Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
8f19afb2dbc885befef2a4e7931dfcb51702a212	28-Feb-2011	Paul Gortmaker <paul.gortmaker@windriver.com>	tipc: cosmetic - function names are not to be full sentences Function names like "tipc_node_has_redundant_links" are unweildy and result in long lines even for simple lines. The "has" doesn't contribute any value add, so dropping that is a slight step in the right direction. This is a cosmetic change, basic result of: for i in `grep -l tipc_node_has_ *` ; do sed -i s/tipc_node_has_/tipc_node_/ $i ; done Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
672d99e19a12b703c9e2d71ead8fb8b8a85a3886	26-Feb-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Convert node object array to a hash table Replaces the dynamically allocated array of pointers to the cluster's node objects with a static hash table. Hash collisions are resolved using chaining, with a typical hash chain having only a single node, to avoid degrading performance during processing of incoming packets. The conversion to a hash table reduces the memory requirements for TIPC's node table to approximately the same size it had prior to the previous commit. In addition to the hash table itself, TIPC now also maintains a linked list for the node objects, sorted by ascending network address. This list allows TIPC to continue sending responses to user space applications that request node and link information in sorted order. The list also improves performance when name table update messages are sent by making it easier to identify the nodes that must be notified. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
d1bcb11544109114d72965afea7805cc3e16a83a	25-Feb-2011	Allan Stephens <allan.stephens@windriver.com>	tipc: Split up unified structure of network-related variables Converts the fields of the global "tipc_net" structure into individual variables. Since the struct was never referenced as a complete unit, its existence was pointless. This will facilitate upcoming changes to TIPC's node table and simpify upcoming relocation of the variables so they are only visible to the files that actually use them. This change is essentially cosmetic in nature, and doesn't affect the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
f1379173326de4c745c4f610501486e4f3bd9248	23-Feb-2011	Allan Stephens <Allan.Stephens@windriver.com>	tipc: Cosmetic changes to node subscription code Relocates the code that notifies users of node subscriptions so that it is adjacent to the rest of the routines that implement TIPC's node subscription capability. Renames the name table routine that is invoked by a node subscription to better reflect its purpose and to be consistent with other, similar name table routines. These changes are cosmetic in nature, and do not alter the behavior of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
431697eb60d2d36614096aff12bd1b826a9f9bc1	23-Feb-2011	Allan Stephens <Allan.Stephens@windriver.com>	tipc: Prevent null pointer error when removing a node subscription Prevents a null pointer dereference from occurring if a node subscription is triggered at the same time that the subscribing port or publication is terminating the subscription. The problem arises if the triggering routine asynchronously activates and deregisters the node subscription while deregistration is already underway -- the deregistration routine may find that the pointer it has just verified to be non-NULL is now NULL. To avoid this race condition the triggering routine now simply marks the node subscription as defunct (to prevent it from re-activating) instead of deregistering it. The subscription is now both deregistered and destroyed only when the subscribing port or publication code terminates the node subscription. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
e3ec9c7d5eea9adf2c604c623c987360cc700b88	31-Dec-2010	Allan Stephens <Allan.Stephens@windriver.com>	tipc: remove zeroing assignments to static global variables Cleans up TIPC's source code to eliminate the needless initialization of static variables to zero. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
e83504f72456809cdbdbc91700d3ba6370c9da1c	31-Dec-2010	Allan Stephens <Allan.Stephens@windriver.com>	tipc: remove pointless check for NULL prior to kfree It is acceptable to call kfree() with NULL, so these checks are not serving any useful purpose. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
886ef52a8ce6930a9d0c58267d5b5038ac3e8d30	31-Dec-2010	Allan Stephens <Allan.Stephens@windriver.com>	tipc: remove redundant #includes Eliminates a number of #include statements that no longer serve any useful purpose. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
b29f14284989b3d0b3a5ce268b5b1fc4df9c5795	31-Dec-2010	Allan Stephens <Allan.Stephens@windriver.com>	tipc: remove calls to dbg() and msg_dbg() Eliminates obsolete calls to two of TIPC's main debugging macros, as well as a pair of associated debugging routines that are no longer required. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
8f92df6ad49da958d97e171762d0a97a3dc738f1	31-Dec-2010	Allan Stephens <Allan.Stephens@windriver.com>	tipc: Remove prototype code for supporting multiple clusters Eliminates routines, data structures, and files that were intended to allow TIPC to support a network containing multiple clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
c80262829769419e19527f972672e8df0480235a	30-Nov-2010	Allan Stephens <allan.stephens@windriver.com>	tipc: Remove obsolete inclusions of header files Gets rid of #include statements that are no longer required as a result of the merging of obsolete native API header file content into other TIPC include files. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
31e3c3f6f1f9b154981a0e6620df700463db30ee	13-Oct-2010	stephen hemminger <shemminger@vyatta.com>	tipc: cleanup function namespace Do some cleanups of TIPC based on make namespacecheck 1. Don't export unused symbols 2. Eliminate dead code 3. Make functions and variables local 4. Rename buf_acquire to tipc_buf_acquire since it is used in several files Compile tested only. This make break out of tree kernel modules that depend on TIPC routines. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>