/include/uapi/linux/usb/ |
H A D | f_mtp.h | 31 /* MTP command ID for data header, 34 uint16_t command; member in struct:mtp_file_range
|
/include/uapi/linux/ |
H A D | i2c-dev.h | 58 __u8 command; member in struct:i2c_smbus_ioctl_data
|
H A D | pktcdvd.h | 96 __u32 command; /* in: Setup, teardown, status */ member in struct:pkt_ctrl_command
|
H A D | scc.h | 139 int command; /* one of the KISS-Commands defined above */ member in struct:scc_kiss_cmd 153 char option; /* command for function port */
|
/include/linux/ |
H A D | i8042.h | 64 int i8042_command(unsigned char *param, int command); 81 static inline int i8042_command(unsigned char *param, int command) argument
|
H A D | maple.h | 9 /* Maple Bus command and response codes */ 53 enum maple_code command; member in struct:mapleq 96 u32 command, u32 length, void *data);
|
H A D | i2c.h | 79 unsigned short flags, char read_write, u8 command, 88 u8 command); 90 u8 command, u8 value); 92 u8 command); 94 u8 command, u16 value); 97 i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command) argument 99 s32 value = i2c_smbus_read_word_data(client, command); 106 u8 command, u16 value) 108 return i2c_smbus_write_word_data(client, command, swab16(value)); 113 u8 command, u 105 i2c_smbus_write_word_swapped(const struct i2c_client *client, u8 command, u16 value) argument 188 int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); member in struct:i2c_driver [all...] |
H A D | arcdevice.h | 146 /* in the command register, the following bits have these meanings: 147 * 0-2 command 148 * 3-4 page number (for enable rcv/xmt command) 159 /* flags for "clear flags" command */ 165 /* flags for "load test flags" command */ 171 /* for "enable receiver" command */ 174 /* flags for "define configuration" command */ 301 void (*command) (struct net_device * dev, int cmd); member in struct:arcnet_local::__anon70 319 #define ACOMMAND(x) (lp->hw.command(dev, (x)))
|
H A D | cper.h | 393 __u16 command; member in struct:cper_sec_pcie
|
H A D | isdnif.h | 23 /* The proceed command holds a incoming call in a state to leave processes */ 32 /* Any additional data is protocol and command specific. */ 103 /* a command and returned by HL for */ 370 int command; /* Command or Status (see above) */ member in struct:__anon447 435 * command = One of above ISDN_STAT_... constants. 441 /* Send command 445 * command = One of above ISDN_CMD_... constants. 446 * arg = depending on command. 447 * num = depending on command. 449 int (*command)(isdn_ctr member in struct:__anon449 [all...] |
/include/linux/mfd/ |
H A D | cros_ec.h | 40 * @command: Command to send (EC_CMD_...) 45 * @result: EC's response to the command (separate from communication failure) 49 uint32_t command; member in struct:cros_ec_command 81 * @cmd_xfer: send command to EC and get response 83 * that doesn't mean the EC was happy with the command. The caller 156 * cros_ec_cmd_xfer - Send a command to the ChromeOS EC 158 * Call this to send a command to the ChromeOS EC. This should be used
|
H A D | si476x-core.h | 72 * POWER_UP command. The device is ready to be used. 104 * @command: Wait queue for wainting on the command comapletion. 111 * command when the device is started. 121 * command set support). 139 wait_queue_head_t command; member in struct:si476x_core 256 * FUNC_INFO command. 273 * to POWER_DOWN command 316 * response to 'FM_RD_STATUS' command
|
/include/uapi/sound/ |
H A D | firewire.h | 34 __be32 command; member in struct:snd_efw_transaction
|
/include/uapi/drm/ |
H A D | qxl_drm.h | 74 uint32_t dst_handle; /* 0 if to command buffer */ 80 uint64_t __user command; /* void* */ member in struct:drm_qxl_command
|
/include/uapi/linux/netfilter/ |
H A D | nfnetlink_log.h | 68 __u8 command; /* nfulnl_msg_config_cmds */ member in struct:nfulnl_msg_config_cmd
|
H A D | nfnetlink_queue.h | 72 __u8 command; /* nfqnl_msg_config_cmds */ member in struct:nfqnl_msg_config_cmd
|
/include/linux/i2c/ |
H A D | bfin_twi.h | 58 u8 command; member in struct:bfin_twi_iface
|
/include/linux/mtd/ |
H A D | onenand.h | 59 * @command: [REPLACEABLE] hardware specific function for writing 107 int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len); member in struct:onenand_chip 146 * Such command status OnGo bit is checked at the end of
|
H A D | nand.h | 33 * and override command or ECC setup according to flash type. 42 /* Internal helper for board drivers which need to override command function */ 62 /* Select the command latch by setting CLE to high */ 152 /* Device is one of 'new' xD cards that expose fake nand command set */ 542 * ALE/CLE/nCE. Also used to write command and address 646 void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, 867 * ALE/CLE/nCE. Also used to write command and address 941 * @command: opcode to check 943 static inline int nand_opcode_8bits(unsigned int command) argument 945 switch (command) { [all...] |
/include/linux/usb/ |
H A D | ehci_def.h | 67 u32 command; member in struct:ehci_regs
|
/include/sound/ |
H A D | opl3.h | 308 void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val); member in struct:snd_opl3
|
/include/acpi/ |
H A D | actbl3.h | 509 u16 command; member in struct:acpi_pcct_shared_memory 606 u16 command; member in struct:acpi_rasf_shared_memory
|
H A D | actbl2.h | 179 u8 command; member in struct:acpi_asf_alert_data 204 u8 command; member in struct:acpi_asf_control_data 215 u8 command; member in struct:acpi_asf_rmcp
|
/include/uapi/linux/wimax/ |
H A D | i2400m.h | 93 * message (with the same type as the command), status and 94 * no (TLV) payload. Execution of a command might cause 157 /* Boot mode command masks and stuff */ 172 * i2400m_bootrom_header - Header for a boot-mode command 174 * @cmd: the above command descriptor 181 __le32 command; /* Compose with enum i2400_brh */ member in struct:i2400m_bootrom_header
|
/include/scsi/ |
H A D | sas.h | 238 u8 command; member in struct:host_to_dev_fis
|