1/*
2 * Copyright 2012 Markus Pargmann, Pengutronix
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include "imx27-phytec-phycard-s-som.dtsi"
13
14/ {
15	model = "Phytec pca100 rapid development kit";
16	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
17
18	chosen {
19		stdout-path = &uart1;
20	};
21
22	display: display {
23		model = "Primeview-PD050VL1";
24		native-mode = <&timing0>;
25		bits-per-pixel = <16>;  /* non-standard but required */
26		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
27		display-timings {
28			timing0: 640x480 {
29				hactive = <640>;
30				vactive = <480>;
31				hback-porch = <112>;
32				hfront-porch = <36>;
33				hsync-len = <32>;
34				vback-porch = <33>;
35				vfront-porch = <33>;
36				vsync-len = <2>;
37				clock-frequency = <25000000>;
38			};
39		};
40	};
41
42	regulators {
43		compatible = "simple-bus";
44		#address-cells = <1>;
45		#size-cells = <0>;
46
47		reg_3v3: regulator@0 {
48			compatible = "regulator-fixed";
49			reg = <0>;
50			regulator-name = "3V3";
51			regulator-min-microvolt = <3300000>;
52			regulator-max-microvolt = <3300000>;
53			regulator-always-on;
54		};
55	};
56};
57
58&fb {
59	display = <&display>;
60	status = "okay";
61};
62
63&i2c1 {
64	pinctrl-names = "default";
65	pinctrl-0 = <&pinctrl_i2c1>;
66	status = "okay";
67
68	rtc@51 {
69		compatible = "nxp,pcf8563";
70		reg = <0x51>;
71	};
72
73	adc@64 {
74		compatible = "maxim,max1037";
75		vcc-supply = <&reg_3v3>;
76		reg = <0x64>;
77	};
78};
79
80&iomuxc {
81	imx27-phycard-s-rdk {
82		pinctrl_i2c1: i2c1grp {
83			fsl,pins = <
84				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
85				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
86			>;
87		};
88
89		pinctrl_owire1: owire1grp {
90			fsl,pins = <
91				MX27_PAD_RTCK__OWIRE 0x0
92			>;
93		};
94
95		pinctrl_sdhc2: sdhc2grp {
96			fsl,pins = <
97				MX27_PAD_SD2_CLK__SD2_CLK 0x0
98				MX27_PAD_SD2_CMD__SD2_CMD 0x0
99				MX27_PAD_SD2_D0__SD2_D0 0x0
100				MX27_PAD_SD2_D1__SD2_D1 0x0
101				MX27_PAD_SD2_D2__SD2_D2 0x0
102				MX27_PAD_SD2_D3__SD2_D3 0x0
103				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
104			>;
105		};
106
107		pinctrl_uart1: uart1grp {
108			fsl,pins = <
109				MX27_PAD_UART1_TXD__UART1_TXD 0x0
110				MX27_PAD_UART1_RXD__UART1_RXD 0x0
111				MX27_PAD_UART1_CTS__UART1_CTS 0x0
112				MX27_PAD_UART1_RTS__UART1_RTS 0x0
113			>;
114		};
115
116		pinctrl_uart2: uart2grp {
117			fsl,pins = <
118				MX27_PAD_UART2_TXD__UART2_TXD 0x0
119				MX27_PAD_UART2_RXD__UART2_RXD 0x0
120				MX27_PAD_UART2_CTS__UART2_CTS 0x0
121				MX27_PAD_UART2_RTS__UART2_RTS 0x0
122			>;
123		};
124
125		pinctrl_uart3: uart3grp {
126			fsl,pins = <
127				MX27_PAD_UART3_TXD__UART3_TXD 0x0
128				MX27_PAD_UART3_RXD__UART3_RXD 0x0
129				MX27_PAD_UART3_CTS__UART3_CTS 0x0
130				MX27_PAD_UART3_RTS__UART3_RTS 0x0
131			>;
132		};
133	};
134};
135
136&owire {
137	pinctrl-names = "default";
138	pinctrl-0 = <&pinctrl_owire1>;
139	status = "okay";
140};
141
142&sdhci2 {
143	pinctrl-names = "default";
144	pinctrl-0 = <&pinctrl_sdhc2>;
145	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
146	status = "okay";
147};
148
149&uart1 {
150	fsl,uart-has-rtscts;
151	pinctrl-names = "default";
152	pinctrl-0 = <&pinctrl_uart1>;
153	status = "okay";
154};
155
156&uart2 {
157	fsl,uart-has-rtscts;
158	pinctrl-names = "default";
159	pinctrl-0 = <&pinctrl_uart2>;
160	status = "okay";
161};
162
163&uart3 {
164	fsl,uart-has-rtscts;
165	pinctrl-names = "default";
166	pinctrl-0 = <&pinctrl_uart3>;
167	status = "okay";
168};
169