1/******************************************************************************
2 *
3 * Module Name: dswload2 - Dispatcher second pass namespace load callbacks
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions, and the following disclaimer,
16 *    without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 *    substantially similar to the "NO WARRANTY" disclaimer below
19 *    ("Disclaimer") and any redistribution must be conditioned upon
20 *    including a substantially similar Disclaimer requirement for further
21 *    binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 *    of any contributors may be used to endorse or promote products derived
24 *    from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acparser.h"
47#include "amlcode.h"
48#include "acdispat.h"
49#include "acinterp.h"
50#include "acnamesp.h"
51#include "acevents.h"
52
53#define _COMPONENT          ACPI_DISPATCHER
54ACPI_MODULE_NAME("dswload2")
55
56/*******************************************************************************
57 *
58 * FUNCTION:    acpi_ds_load2_begin_op
59 *
60 * PARAMETERS:  walk_state      - Current state of the parse tree walk
61 *              out_op          - Wher to return op if a new one is created
62 *
63 * RETURN:      Status
64 *
65 * DESCRIPTION: Descending callback used during the loading of ACPI tables.
66 *
67 ******************************************************************************/
68acpi_status
69acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
70		       union acpi_parse_object **out_op)
71{
72	union acpi_parse_object *op;
73	struct acpi_namespace_node *node;
74	acpi_status status;
75	acpi_object_type object_type;
76	char *buffer_ptr;
77	u32 flags;
78
79	ACPI_FUNCTION_TRACE(ds_load2_begin_op);
80
81	op = walk_state->op;
82	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
83			  walk_state));
84
85	if (op) {
86		if ((walk_state->control_state) &&
87		    (walk_state->control_state->common.state ==
88		     ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
89
90			/* We are executing a while loop outside of a method */
91
92			status = acpi_ds_exec_begin_op(walk_state, out_op);
93			return_ACPI_STATUS(status);
94		}
95
96		/* We only care about Namespace opcodes here */
97
98		if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
99		     (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
100		    (!(walk_state->op_info->flags & AML_NAMED))) {
101			return_ACPI_STATUS(AE_OK);
102		}
103
104		/* Get the name we are going to enter or lookup in the namespace */
105
106		if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
107
108			/* For Namepath op, get the path string */
109
110			buffer_ptr = op->common.value.string;
111			if (!buffer_ptr) {
112
113				/* No name, just exit */
114
115				return_ACPI_STATUS(AE_OK);
116			}
117		} else {
118			/* Get name from the op */
119
120			buffer_ptr = ACPI_CAST_PTR(char, &op->named.name);
121		}
122	} else {
123		/* Get the namestring from the raw AML */
124
125		buffer_ptr =
126		    acpi_ps_get_next_namestring(&walk_state->parser_state);
127	}
128
129	/* Map the opcode into an internal object type */
130
131	object_type = walk_state->op_info->object_type;
132
133	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
134			  "State=%p Op=%p Type=%X\n", walk_state, op,
135			  object_type));
136
137	switch (walk_state->opcode) {
138	case AML_FIELD_OP:
139	case AML_BANK_FIELD_OP:
140	case AML_INDEX_FIELD_OP:
141
142		node = NULL;
143		status = AE_OK;
144		break;
145
146	case AML_INT_NAMEPATH_OP:
147		/*
148		 * The name_path is an object reference to an existing object.
149		 * Don't enter the name into the namespace, but look it up
150		 * for use later.
151		 */
152		status =
153		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
154				   object_type, ACPI_IMODE_EXECUTE,
155				   ACPI_NS_SEARCH_PARENT, walk_state, &(node));
156		break;
157
158	case AML_SCOPE_OP:
159
160		/* Special case for Scope(\) -> refers to the Root node */
161
162		if (op && (op->named.node == acpi_gbl_root_node)) {
163			node = op->named.node;
164
165			status =
166			    acpi_ds_scope_stack_push(node, object_type,
167						     walk_state);
168			if (ACPI_FAILURE(status)) {
169				return_ACPI_STATUS(status);
170			}
171		} else {
172			/*
173			 * The Path is an object reference to an existing object.
174			 * Don't enter the name into the namespace, but look it up
175			 * for use later.
176			 */
177			status =
178			    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
179					   object_type, ACPI_IMODE_EXECUTE,
180					   ACPI_NS_SEARCH_PARENT, walk_state,
181					   &(node));
182			if (ACPI_FAILURE(status)) {
183#ifdef ACPI_ASL_COMPILER
184				if (status == AE_NOT_FOUND) {
185					status = AE_OK;
186				} else {
187					ACPI_ERROR_NAMESPACE(buffer_ptr,
188							     status);
189				}
190#else
191				ACPI_ERROR_NAMESPACE(buffer_ptr, status);
192#endif
193				return_ACPI_STATUS(status);
194			}
195		}
196
197		/*
198		 * We must check to make sure that the target is
199		 * one of the opcodes that actually opens a scope
200		 */
201		switch (node->type) {
202		case ACPI_TYPE_ANY:
203		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope */
204		case ACPI_TYPE_DEVICE:
205		case ACPI_TYPE_POWER:
206		case ACPI_TYPE_PROCESSOR:
207		case ACPI_TYPE_THERMAL:
208
209			/* These are acceptable types */
210			break;
211
212		case ACPI_TYPE_INTEGER:
213		case ACPI_TYPE_STRING:
214		case ACPI_TYPE_BUFFER:
215
216			/*
217			 * These types we will allow, but we will change the type.
218			 * This enables some existing code of the form:
219			 *
220			 *  Name (DEB, 0)
221			 *  Scope (DEB) { ... }
222			 */
223			ACPI_WARNING((AE_INFO,
224				      "Type override - [%4.4s] had invalid type (%s) "
225				      "for Scope operator, changed to type ANY",
226				      acpi_ut_get_node_name(node),
227				      acpi_ut_get_type_name(node->type)));
228
229			node->type = ACPI_TYPE_ANY;
230			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
231			break;
232
233		case ACPI_TYPE_METHOD:
234
235			/*
236			 * Allow scope change to root during execution of module-level
237			 * code. Root is typed METHOD during this time.
238			 */
239			if ((node == acpi_gbl_root_node) &&
240			    (walk_state->
241			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
242				break;
243			}
244
245			/*lint -fallthrough */
246
247		default:
248
249			/* All other types are an error */
250
251			ACPI_ERROR((AE_INFO,
252				    "Invalid type (%s) for target of "
253				    "Scope operator [%4.4s] (Cannot override)",
254				    acpi_ut_get_type_name(node->type),
255				    acpi_ut_get_node_name(node)));
256
257			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
258		}
259		break;
260
261	default:
262
263		/* All other opcodes */
264
265		if (op && op->common.node) {
266
267			/* This op/node was previously entered into the namespace */
268
269			node = op->common.node;
270
271			if (acpi_ns_opens_scope(object_type)) {
272				status =
273				    acpi_ds_scope_stack_push(node, object_type,
274							     walk_state);
275				if (ACPI_FAILURE(status)) {
276					return_ACPI_STATUS(status);
277				}
278			}
279
280			return_ACPI_STATUS(AE_OK);
281		}
282
283		/*
284		 * Enter the named type into the internal namespace. We enter the name
285		 * as we go downward in the parse tree. Any necessary subobjects that
286		 * involve arguments to the opcode must be created as we go back up the
287		 * parse tree later.
288		 *
289		 * Note: Name may already exist if we are executing a deferred opcode.
290		 */
291		if (walk_state->deferred_node) {
292
293			/* This name is already in the namespace, get the node */
294
295			node = walk_state->deferred_node;
296			status = AE_OK;
297			break;
298		}
299
300		flags = ACPI_NS_NO_UPSEARCH;
301		if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
302
303			/* Execution mode, node cannot already exist, node is temporary */
304
305			flags |= ACPI_NS_ERROR_IF_FOUND;
306
307			if (!
308			    (walk_state->
309			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
310				flags |= ACPI_NS_TEMPORARY;
311			}
312		}
313
314		/* Add new entry or lookup existing entry */
315
316		status =
317		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
318				   object_type, ACPI_IMODE_LOAD_PASS2, flags,
319				   walk_state, &node);
320
321		if (ACPI_SUCCESS(status) && (flags & ACPI_NS_TEMPORARY)) {
322			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
323					  "***New Node [%4.4s] %p is temporary\n",
324					  acpi_ut_get_node_name(node), node));
325		}
326		break;
327	}
328
329	if (ACPI_FAILURE(status)) {
330		ACPI_ERROR_NAMESPACE(buffer_ptr, status);
331		return_ACPI_STATUS(status);
332	}
333
334	if (!op) {
335
336		/* Create a new op */
337
338		op = acpi_ps_alloc_op(walk_state->opcode);
339		if (!op) {
340			return_ACPI_STATUS(AE_NO_MEMORY);
341		}
342
343		/* Initialize the new op */
344
345		if (node) {
346			op->named.name = node->name.integer;
347		}
348		*out_op = op;
349	}
350
351	/*
352	 * Put the Node in the "op" object that the parser uses, so we
353	 * can get it again quickly when this scope is closed
354	 */
355	op->common.node = node;
356	return_ACPI_STATUS(status);
357}
358
359/*******************************************************************************
360 *
361 * FUNCTION:    acpi_ds_load2_end_op
362 *
363 * PARAMETERS:  walk_state      - Current state of the parse tree walk
364 *
365 * RETURN:      Status
366 *
367 * DESCRIPTION: Ascending callback used during the loading of the namespace,
368 *              both control methods and everything else.
369 *
370 ******************************************************************************/
371
372acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
373{
374	union acpi_parse_object *op;
375	acpi_status status = AE_OK;
376	acpi_object_type object_type;
377	struct acpi_namespace_node *node;
378	union acpi_parse_object *arg;
379	struct acpi_namespace_node *new_node;
380#ifndef ACPI_NO_METHOD_EXECUTION
381	u32 i;
382	u8 region_space;
383#endif
384
385	ACPI_FUNCTION_TRACE(ds_load2_end_op);
386
387	op = walk_state->op;
388	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
389			  walk_state->op_info->name, op, walk_state));
390
391	/* Check if opcode had an associated namespace object */
392
393	if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
394		return_ACPI_STATUS(AE_OK);
395	}
396
397	if (op->common.aml_opcode == AML_SCOPE_OP) {
398		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
399				  "Ending scope Op=%p State=%p\n", op,
400				  walk_state));
401	}
402
403	object_type = walk_state->op_info->object_type;
404
405	/*
406	 * Get the Node/name from the earlier lookup
407	 * (It was saved in the *op structure)
408	 */
409	node = op->common.node;
410
411	/*
412	 * Put the Node on the object stack (Contains the ACPI Name of
413	 * this object)
414	 */
415	walk_state->operands[0] = (void *)node;
416	walk_state->num_operands = 1;
417
418	/* Pop the scope stack */
419
420	if (acpi_ns_opens_scope(object_type) &&
421	    (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
422		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
423				  "(%s) Popping scope for Op %p\n",
424				  acpi_ut_get_type_name(object_type), op));
425
426		status = acpi_ds_scope_stack_pop(walk_state);
427		if (ACPI_FAILURE(status)) {
428			goto cleanup;
429		}
430	}
431
432	/*
433	 * Named operations are as follows:
434	 *
435	 * AML_ALIAS
436	 * AML_BANKFIELD
437	 * AML_CREATEBITFIELD
438	 * AML_CREATEBYTEFIELD
439	 * AML_CREATEDWORDFIELD
440	 * AML_CREATEFIELD
441	 * AML_CREATEQWORDFIELD
442	 * AML_CREATEWORDFIELD
443	 * AML_DATA_REGION
444	 * AML_DEVICE
445	 * AML_EVENT
446	 * AML_FIELD
447	 * AML_INDEXFIELD
448	 * AML_METHOD
449	 * AML_METHODCALL
450	 * AML_MUTEX
451	 * AML_NAME
452	 * AML_NAMEDFIELD
453	 * AML_OPREGION
454	 * AML_POWERRES
455	 * AML_PROCESSOR
456	 * AML_SCOPE
457	 * AML_THERMALZONE
458	 */
459
460	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
461			  "Create-Load [%s] State=%p Op=%p NamedObj=%p\n",
462			  acpi_ps_get_opcode_name(op->common.aml_opcode),
463			  walk_state, op, node));
464
465	/* Decode the opcode */
466
467	arg = op->common.value.arg;
468
469	switch (walk_state->op_info->type) {
470#ifndef ACPI_NO_METHOD_EXECUTION
471
472	case AML_TYPE_CREATE_FIELD:
473		/*
474		 * Create the field object, but the field buffer and index must
475		 * be evaluated later during the execution phase
476		 */
477		status = acpi_ds_create_buffer_field(op, walk_state);
478		break;
479
480	case AML_TYPE_NAMED_FIELD:
481		/*
482		 * If we are executing a method, initialize the field
483		 */
484		if (walk_state->method_node) {
485			status = acpi_ds_init_field_objects(op, walk_state);
486		}
487
488		switch (op->common.aml_opcode) {
489		case AML_INDEX_FIELD_OP:
490
491			status =
492			    acpi_ds_create_index_field(op,
493						       (acpi_handle) arg->
494						       common.node, walk_state);
495			break;
496
497		case AML_BANK_FIELD_OP:
498
499			status =
500			    acpi_ds_create_bank_field(op, arg->common.node,
501						      walk_state);
502			break;
503
504		case AML_FIELD_OP:
505
506			status =
507			    acpi_ds_create_field(op, arg->common.node,
508						 walk_state);
509			break;
510
511		default:
512
513			/* All NAMED_FIELD opcodes must be handled above */
514			break;
515		}
516		break;
517
518	case AML_TYPE_NAMED_SIMPLE:
519
520		status = acpi_ds_create_operands(walk_state, arg);
521		if (ACPI_FAILURE(status)) {
522			goto cleanup;
523		}
524
525		switch (op->common.aml_opcode) {
526		case AML_PROCESSOR_OP:
527
528			status = acpi_ex_create_processor(walk_state);
529			break;
530
531		case AML_POWER_RES_OP:
532
533			status = acpi_ex_create_power_resource(walk_state);
534			break;
535
536		case AML_MUTEX_OP:
537
538			status = acpi_ex_create_mutex(walk_state);
539			break;
540
541		case AML_EVENT_OP:
542
543			status = acpi_ex_create_event(walk_state);
544			break;
545
546		case AML_ALIAS_OP:
547
548			status = acpi_ex_create_alias(walk_state);
549			break;
550
551		default:
552
553			/* Unknown opcode */
554
555			status = AE_OK;
556			goto cleanup;
557		}
558
559		/* Delete operands */
560
561		for (i = 1; i < walk_state->num_operands; i++) {
562			acpi_ut_remove_reference(walk_state->operands[i]);
563			walk_state->operands[i] = NULL;
564		}
565
566		break;
567#endif				/* ACPI_NO_METHOD_EXECUTION */
568
569	case AML_TYPE_NAMED_COMPLEX:
570
571		switch (op->common.aml_opcode) {
572#ifndef ACPI_NO_METHOD_EXECUTION
573		case AML_REGION_OP:
574		case AML_DATA_REGION_OP:
575
576			if (op->common.aml_opcode == AML_REGION_OP) {
577				region_space = (acpi_adr_space_type)
578				    ((op->common.value.arg)->common.value.
579				     integer);
580			} else {
581				region_space = ACPI_ADR_SPACE_DATA_TABLE;
582			}
583
584			/*
585			 * The op_region is not fully parsed at this time. The only valid
586			 * argument is the space_id. (We must save the address of the
587			 * AML of the address and length operands)
588			 *
589			 * If we have a valid region, initialize it. The namespace is
590			 * unlocked at this point.
591			 *
592			 * Need to unlock interpreter if it is locked (if we are running
593			 * a control method), in order to allow _REG methods to be run
594			 * during acpi_ev_initialize_region.
595			 */
596			if (walk_state->method_node) {
597				/*
598				 * Executing a method: initialize the region and unlock
599				 * the interpreter
600				 */
601				status =
602				    acpi_ex_create_region(op->named.data,
603							  op->named.length,
604							  region_space,
605							  walk_state);
606				if (ACPI_FAILURE(status)) {
607					return_ACPI_STATUS(status);
608				}
609
610				acpi_ex_exit_interpreter();
611			}
612
613			status =
614			    acpi_ev_initialize_region
615			    (acpi_ns_get_attached_object(node), FALSE);
616			if (walk_state->method_node) {
617				acpi_ex_enter_interpreter();
618			}
619
620			if (ACPI_FAILURE(status)) {
621				/*
622				 *  If AE_NOT_EXIST is returned, it is not fatal
623				 *  because many regions get created before a handler
624				 *  is installed for said region.
625				 */
626				if (AE_NOT_EXIST == status) {
627					status = AE_OK;
628				}
629			}
630			break;
631
632		case AML_NAME_OP:
633
634			status = acpi_ds_create_node(walk_state, node, op);
635			break;
636
637		case AML_METHOD_OP:
638			/*
639			 * method_op pkg_length name_string method_flags term_list
640			 *
641			 * Note: We must create the method node/object pair as soon as we
642			 * see the method declaration. This allows later pass1 parsing
643			 * of invocations of the method (need to know the number of
644			 * arguments.)
645			 */
646			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
647					  "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
648					  walk_state, op, op->named.node));
649
650			if (!acpi_ns_get_attached_object(op->named.node)) {
651				walk_state->operands[0] =
652				    ACPI_CAST_PTR(void, op->named.node);
653				walk_state->num_operands = 1;
654
655				status =
656				    acpi_ds_create_operands(walk_state,
657							    op->common.value.
658							    arg);
659				if (ACPI_SUCCESS(status)) {
660					status =
661					    acpi_ex_create_method(op->named.
662								  data,
663								  op->named.
664								  length,
665								  walk_state);
666				}
667				walk_state->operands[0] = NULL;
668				walk_state->num_operands = 0;
669
670				if (ACPI_FAILURE(status)) {
671					return_ACPI_STATUS(status);
672				}
673			}
674			break;
675
676#endif				/* ACPI_NO_METHOD_EXECUTION */
677
678		default:
679
680			/* All NAMED_COMPLEX opcodes must be handled above */
681			break;
682		}
683		break;
684
685	case AML_CLASS_INTERNAL:
686
687		/* case AML_INT_NAMEPATH_OP: */
688		break;
689
690	case AML_CLASS_METHOD_CALL:
691
692		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
693				  "RESOLVING-MethodCall: State=%p Op=%p NamedObj=%p\n",
694				  walk_state, op, node));
695
696		/*
697		 * Lookup the method name and save the Node
698		 */
699		status =
700		    acpi_ns_lookup(walk_state->scope_info,
701				   arg->common.value.string, ACPI_TYPE_ANY,
702				   ACPI_IMODE_LOAD_PASS2,
703				   ACPI_NS_SEARCH_PARENT |
704				   ACPI_NS_DONT_OPEN_SCOPE, walk_state,
705				   &(new_node));
706		if (ACPI_SUCCESS(status)) {
707			/*
708			 * Make sure that what we found is indeed a method
709			 * We didn't search for a method on purpose, to see if the name
710			 * would resolve
711			 */
712			if (new_node->type != ACPI_TYPE_METHOD) {
713				status = AE_AML_OPERAND_TYPE;
714			}
715
716			/* We could put the returned object (Node) on the object stack for
717			 * later, but for now, we will put it in the "op" object that the
718			 * parser uses, so we can get it again at the end of this scope
719			 */
720			op->common.node = new_node;
721		} else {
722			ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
723		}
724		break;
725
726	default:
727
728		break;
729	}
730
731cleanup:
732
733	/* Remove the Node pushed at the very beginning */
734
735	walk_state->operands[0] = NULL;
736	walk_state->num_operands = 0;
737	return_ACPI_STATUS(status);
738}
739