1#
2# SATA/PATA driver configuration
3#
4
5config HAVE_PATA_PLATFORM
6	bool
7	help
8	  This is an internal configuration node for any machine that
9	  uses pata-platform driver to enable the relevant driver in the
10	  configuration structure without having to submit endless patches
11	  to update the PATA_PLATFORM entry.
12
13menuconfig ATA
14	tristate "Serial ATA and Parallel ATA drivers (libata)"
15	depends on HAS_IOMEM
16	depends on BLOCK
17	depends on !(M32R || M68K || S390) || BROKEN
18	select SCSI
19	select GLOB
20	---help---
21	  If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
22	  any other ATA device under Linux, say Y and make sure that you know
23	  the name of your ATA host adapter (the card inside your computer
24	  that "speaks" the ATA protocol, also called ATA controller),
25	  because you will be asked for it.
26
27	  NOTE: ATA enables basic SCSI support; *however*,
28	  'SCSI disk support', 'SCSI tape support', or
29	  'SCSI CDROM support' may also be needed,
30	  depending on your hardware configuration.
31
32if ATA
33
34config ATA_NONSTANDARD
35       bool
36       default n
37
38config ATA_VERBOSE_ERROR
39	bool "Verbose ATA error reporting"
40	default y
41	help
42	  This option adds parsing of ATA command descriptions and error bits
43	  in libata kernel output, making it easier to interpret.
44	  This option will enlarge the kernel by approx. 6KB. Disable it only
45	  if kernel size is more important than ease of debugging.
46
47	  If unsure, say Y.
48
49config ATA_ACPI
50	bool "ATA ACPI Support"
51	depends on ACPI && PCI
52	default y
53	help
54	  This option adds support for ATA-related ACPI objects.
55	  These ACPI objects add the ability to retrieve taskfiles
56	  from the ACPI BIOS and write them to the disk controller.
57	  These objects may be related to performance, security,
58	  power management, or other areas.
59	  You can disable this at kernel boot time by using the
60	  option libata.noacpi=1
61
62config SATA_ZPODD
63	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
64	depends on ATA_ACPI && PM_RUNTIME
65	default n
66	help
67	  This option adds support for SATA Zero Power Optical Disc
68	  Drive (ZPODD). It requires both the ODD and the platform
69	  support, and if enabled, will automatically power on/off the
70	  ODD when certain condition is satisfied. This does not impact
71	  end user's experience of the ODD, only power is saved when
72	  the ODD is not in use (i.e. no disc inside).
73
74	  If unsure, say N.
75
76config SATA_PMP
77	bool "SATA Port Multiplier support"
78	default y
79	help
80	  This option adds support for SATA Port Multipliers
81	  (the SATA version of an ethernet hub, or SAS expander).
82
83comment "Controllers with non-SFF native interface"
84
85config SATA_AHCI
86	tristate "AHCI SATA support"
87	depends on PCI
88	help
89	  This option enables support for AHCI Serial ATA.
90
91	  If unsure, say N.
92
93config SATA_AHCI_PLATFORM
94	tristate "Platform AHCI SATA support"
95	help
96	  This option enables support for Platform AHCI Serial ATA
97	  controllers.
98
99	  If unsure, say N.
100
101config AHCI_DA850
102	tristate "DaVinci DA850 AHCI SATA support"
103	depends on ARCH_DAVINCI_DA850
104	help
105	  This option enables support for the DaVinci DA850 SoC's
106	  onboard AHCI SATA.
107
108	  If unsure, say N.
109
110config AHCI_ST
111	tristate "ST AHCI SATA support"
112	depends on ARCH_STI
113	help
114	  This option enables support for ST AHCI SATA controller.
115
116	  If unsure, say N.
117
118config AHCI_IMX
119	tristate "Freescale i.MX AHCI SATA support"
120	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
121	help
122	  This option enables support for the Freescale i.MX SoC's
123	  onboard AHCI SATA.
124
125	  If unsure, say N.
126
127config AHCI_MVEBU
128	tristate "Marvell EBU AHCI SATA support"
129	depends on ARCH_MVEBU
130	help
131	  This option enables support for the Marvebu EBU SoC's
132	  onboard AHCI SATA.
133
134	  If unsure, say N.
135
136config AHCI_SUNXI
137	tristate "Allwinner sunxi AHCI SATA support"
138	depends on ARCH_SUNXI
139	help
140	  This option enables support for the Allwinner sunxi SoC's
141	  onboard AHCI SATA.
142
143	  If unsure, say N.
144
145config AHCI_TEGRA
146	tristate "NVIDIA Tegra124 AHCI SATA support"
147	depends on ARCH_TEGRA
148	help
149	  This option enables support for the NVIDIA Tegra124 SoC's
150	  onboard AHCI SATA.
151
152	  If unsure, say N.
153
154config AHCI_XGENE
155	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
156	depends on PHY_XGENE
157	help
158	 This option enables support for APM X-Gene SoC SATA host controller.
159
160config SATA_FSL
161	tristate "Freescale 3.0Gbps SATA support"
162	depends on FSL_SOC
163	help
164	  This option enables support for Freescale 3.0Gbps SATA controller.
165	  It can be found on MPC837x and MPC8315.
166
167	  If unsure, say N.
168
169config SATA_INIC162X
170	tristate "Initio 162x SATA support (Very Experimental)"
171	depends on PCI
172	help
173	  This option enables support for Initio 162x Serial ATA.
174
175config SATA_ACARD_AHCI
176	tristate "ACard AHCI variant (ATP 8620)"
177	depends on PCI
178	help
179	  This option enables support for Acard.
180
181	  If unsure, say N.
182
183config SATA_SIL24
184	tristate "Silicon Image 3124/3132 SATA support"
185	depends on PCI
186	help
187	  This option enables support for Silicon Image 3124/3132 Serial ATA.
188
189	  If unsure, say N.
190
191config ATA_SFF
192	bool "ATA SFF support (for legacy IDE and PATA)"
193	default y
194	help
195	  This option adds support for ATA controllers with SFF
196	  compliant or similar programming interface.
197
198	  SFF is the legacy IDE interface that has been around since
199	  the dawn of time.  Almost all PATA controllers have an
200	  SFF interface.  Many SATA controllers have an SFF interface
201	  when configured into a legacy compatibility mode.
202
203	  For users with exclusively modern controllers like AHCI,
204	  Silicon Image 3124, or Marvell 6440, you may choose to
205	  disable this unneeded SFF support.
206
207	  If unsure, say Y.
208
209if ATA_SFF
210
211comment "SFF controllers with custom DMA interface"
212
213config PDC_ADMA
214	tristate "Pacific Digital ADMA support"
215	depends on PCI
216	help
217	  This option enables support for Pacific Digital ADMA controllers
218
219	  If unsure, say N.
220
221config PATA_OCTEON_CF
222	tristate "OCTEON Boot Bus Compact Flash support"
223	depends on CAVIUM_OCTEON_SOC
224	help
225	  This option enables a polled compact flash driver for use with
226	  compact flash cards attached to the OCTEON boot bus.
227
228	  If unsure, say N.
229
230config SATA_QSTOR
231	tristate "Pacific Digital SATA QStor support"
232	depends on PCI
233	help
234	  This option enables support for Pacific Digital Serial ATA QStor.
235
236	  If unsure, say N.
237
238config SATA_SX4
239	tristate "Promise SATA SX4 support (Experimental)"
240	depends on PCI
241	help
242	  This option enables support for Promise Serial ATA SX4.
243
244	  If unsure, say N.
245
246config ATA_BMDMA
247	bool "ATA BMDMA support"
248	default y
249	help
250	  This option adds support for SFF ATA controllers with BMDMA
251	  capability.  BMDMA stands for bus-master DMA and is the
252	  de facto DMA interface for SFF controllers.
253
254	  If unsure, say Y.
255
256if ATA_BMDMA
257
258comment "SATA SFF controllers with BMDMA"
259
260config ATA_PIIX
261	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
262	depends on PCI
263	help
264	  This option enables support for ICH5/6/7/8 Serial ATA
265	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
266	  host controllers.
267
268	  If unsure, say N.
269
270config SATA_DWC
271	tristate "DesignWare Cores SATA support"
272	depends on 460EX
273	help
274	  This option enables support for the on-chip SATA controller of the
275	  AppliedMicro processor 460EX.
276
277	  If unsure, say N.
278
279config SATA_DWC_DEBUG
280	bool "Debugging driver version"
281	depends on SATA_DWC
282	help
283	  This option enables debugging output in the driver.
284
285config SATA_DWC_VDEBUG
286	bool "Verbose debug output"
287	depends on SATA_DWC_DEBUG
288	help
289	  This option enables the taskfile dumping and NCQ debugging.
290
291config SATA_HIGHBANK
292	tristate "Calxeda Highbank SATA support"
293	depends on ARCH_HIGHBANK || COMPILE_TEST
294	help
295	  This option enables support for the Calxeda Highbank SoC's
296	  onboard SATA.
297
298	  If unsure, say N.
299
300config SATA_MV
301	tristate "Marvell SATA support"
302	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
303		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
304	select GENERIC_PHY
305	help
306	  This option enables support for the Marvell Serial ATA family.
307	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
308	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
309
310	  If unsure, say N.
311
312config SATA_NV
313	tristate "NVIDIA SATA support"
314	depends on PCI
315	help
316	  This option enables support for NVIDIA Serial ATA.
317
318	  If unsure, say N.
319
320config SATA_PROMISE
321	tristate "Promise SATA TX2/TX4 support"
322	depends on PCI
323	help
324	  This option enables support for Promise Serial ATA TX2/TX4.
325
326	  If unsure, say N.
327
328config SATA_RCAR
329	tristate "Renesas R-Car SATA support"
330	depends on ARCH_SHMOBILE || COMPILE_TEST
331	help
332	  This option enables support for Renesas R-Car Serial ATA.
333
334	  If unsure, say N.
335
336config SATA_SIL
337	tristate "Silicon Image SATA support"
338	depends on PCI
339	help
340	  This option enables support for Silicon Image Serial ATA.
341
342	  If unsure, say N.
343
344config SATA_SIS
345	tristate "SiS 964/965/966/180 SATA support"
346	depends on PCI
347	select PATA_SIS
348	help
349	  This option enables support for SiS Serial ATA on
350	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
351	  The PATA support for SiS 180 requires additionally to
352	  enable the PATA_SIS driver in the config.
353	  If unsure, say N.
354
355config SATA_SVW
356	tristate "ServerWorks Frodo / Apple K2 SATA support"
357	depends on PCI
358	help
359	  This option enables support for Broadcom/Serverworks/Apple K2
360	  SATA support.
361
362	  If unsure, say N.
363
364config SATA_ULI
365	tristate "ULi Electronics SATA support"
366	depends on PCI
367	help
368	  This option enables support for ULi Electronics SATA.
369
370	  If unsure, say N.
371
372config SATA_VIA
373	tristate "VIA SATA support"
374	depends on PCI
375	help
376	  This option enables support for VIA Serial ATA.
377
378	  If unsure, say N.
379
380config SATA_VITESSE
381	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
382	depends on PCI
383	help
384	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
385
386	  If unsure, say N.
387
388comment "PATA SFF controllers with BMDMA"
389
390config PATA_ALI
391	tristate "ALi PATA support"
392	depends on PCI
393	help
394	  This option enables support for the ALi ATA interfaces
395	  found on the many ALi chipsets.
396
397	  If unsure, say N.
398
399config PATA_AMD
400	tristate "AMD/NVidia PATA support"
401	depends on PCI
402	help
403	  This option enables support for the AMD and NVidia PATA
404	  interfaces found on the chipsets for Athlon/Athlon64.
405
406	  If unsure, say N.
407
408config PATA_ARASAN_CF
409	tristate "ARASAN CompactFlash PATA Controller Support"
410	depends on ARCH_SPEAR13XX || COMPILE_TEST
411	depends on DMADEVICES
412	select DMA_ENGINE
413	help
414	  Say Y here to support the ARASAN CompactFlash PATA controller
415
416config PATA_ARTOP
417	tristate "ARTOP 6210/6260 PATA support"
418	depends on PCI
419	help
420	  This option enables support for ARTOP PATA controllers.
421
422	  If unsure, say N.
423
424config PATA_ATIIXP
425	tristate "ATI PATA support"
426	depends on PCI
427	help
428	  This option enables support for the ATI ATA interfaces
429	  found on the many ATI chipsets.
430
431	  If unsure, say N.
432
433config PATA_ATP867X
434	tristate "ARTOP/Acard ATP867X PATA support"
435	depends on PCI
436	help
437	  This option enables support for ARTOP/Acard ATP867X PATA
438	  controllers.
439
440	  If unsure, say N.
441
442config PATA_BF54X
443	tristate "Blackfin 54x ATAPI support"
444	depends on BF542 || BF548 || BF549
445	help
446	  This option enables support for the built-in ATAPI controller on
447	  Blackfin 54x family chips.
448
449	  If unsure, say N.
450
451config PATA_CMD64X
452	tristate "CMD64x PATA support"
453	depends on PCI
454	help
455	  This option enables support for the CMD64x series chips
456	  except for the CMD640.
457
458	  If unsure, say N.
459
460config PATA_CS5520
461	tristate "CS5510/5520 PATA support"
462	depends on PCI && (X86_32 || COMPILE_TEST)
463	help
464	  This option enables support for the Cyrix 5510/5520
465	  companion chip used with the MediaGX/Geode processor family.
466
467	  If unsure, say N.
468
469config PATA_CS5530
470	tristate "CS5530 PATA support"
471	depends on PCI && (X86_32 || COMPILE_TEST)
472	help
473	  This option enables support for the Cyrix/NatSemi/AMD CS5530
474	  companion chip used with the MediaGX/Geode processor family.
475
476	  If unsure, say N.
477
478config PATA_CS5535
479	tristate "CS5535 PATA support (Experimental)"
480	depends on PCI && X86_32
481	help
482	  This option enables support for the NatSemi/AMD CS5535
483	  companion chip used with the Geode processor family.
484
485	  If unsure, say N.
486
487config PATA_CS5536
488	tristate "CS5536 PATA support"
489	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
490	help
491	  This option enables support for the AMD CS5536
492	  companion chip used with the Geode LX processor family.
493
494	  If unsure, say N.
495
496config PATA_CYPRESS
497	tristate "Cypress CY82C693 PATA support (Very Experimental)"
498	depends on PCI
499	help
500	  This option enables support for the Cypress/Contaq CY82C693
501	  chipset found in some Alpha systems
502
503	  If unsure, say N.
504
505config PATA_EFAR
506	tristate "EFAR SLC90E66 support"
507	depends on PCI
508	help
509	  This option enables support for the EFAR SLC90E66
510	  IDE controller found on some older machines.
511
512	  If unsure, say N.
513
514config PATA_EP93XX
515	tristate "Cirrus Logic EP93xx PATA support"
516	depends on ARCH_EP93XX
517	help
518	  This option enables support for the PATA controller in
519	  the Cirrus Logic EP9312 and EP9315 ARM CPU.
520
521	  If unsure, say N.
522
523config PATA_HPT366
524	tristate "HPT 366/368 PATA support"
525	depends on PCI
526	help
527	  This option enables support for the HPT 366 and 368
528	  PATA controllers via the new ATA layer.
529
530	  If unsure, say N.
531
532config PATA_HPT37X
533	tristate "HPT 370/370A/371/372/374/302 PATA support"
534	depends on PCI
535	help
536	  This option enables support for the majority of the later HPT
537	  PATA controllers via the new ATA layer.
538
539	  If unsure, say N.
540
541config PATA_HPT3X2N
542	tristate "HPT 371N/372N/302N PATA support"
543	depends on PCI
544	help
545	  This option enables support for the N variant HPT PATA
546	  controllers via the new ATA layer.
547
548	  If unsure, say N.
549
550config PATA_HPT3X3
551	tristate "HPT 343/363 PATA support"
552	depends on PCI
553	help
554	  This option enables support for the HPT 343/363
555	  PATA controllers via the new ATA layer
556
557	  If unsure, say N.
558
559config PATA_HPT3X3_DMA
560	bool "HPT 343/363 DMA support"
561	depends on PATA_HPT3X3
562	help
563	  This option enables DMA support for the HPT343/363
564	  controllers. Enable with care as there are still some
565	  problems with DMA on this chipset.
566
567config PATA_ICSIDE
568	tristate "Acorn ICS PATA support"
569	depends on ARM && ARCH_ACORN
570	help
571	  On Acorn systems, say Y here if you wish to use the ICS PATA
572	  interface card.  This is not required for ICS partition support.
573	  If you are unsure, say N to this.
574
575config PATA_IMX
576	tristate "PATA support for Freescale iMX"
577	depends on ARCH_MXC
578	help
579	  This option enables support for the PATA host available on Freescale
580          iMX SoCs.
581
582	  If unsure, say N.
583
584config PATA_IT8213
585	tristate "IT8213 PATA support (Experimental)"
586	depends on PCI
587	help
588	  This option enables support for the ITE 821 PATA
589          controllers via the new ATA layer.
590
591	  If unsure, say N.
592
593config PATA_IT821X
594	tristate "IT8211/2 PATA support"
595	depends on PCI
596	help
597	  This option enables support for the ITE 8211 and 8212
598	  PATA controllers via the new ATA layer, including RAID
599	  mode.
600
601	  If unsure, say N.
602
603config PATA_JMICRON
604	tristate "JMicron PATA support"
605	depends on PCI
606	help
607	  Enable support for the JMicron IDE controller, via the new
608	  ATA layer.
609
610	  If unsure, say N.
611
612config PATA_MACIO
613	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
614	depends on PPC_PMAC
615	help
616	  Most IDE capable PowerMacs have IDE busses driven by a variant
617          of this controller which is part of the Apple chipset used on
618          most PowerMac models. Some models have multiple busses using
619          different chipsets, though generally, MacIO is one of them.
620
621config PATA_MARVELL
622	tristate "Marvell PATA support via legacy mode"
623	depends on PCI
624	help
625	  This option enables limited support for the Marvell 88SE61xx ATA
626	  controllers. If you wish to use only the SATA ports then select
627	  the AHCI driver alone. If you wish to the use the PATA port or
628	  both SATA and PATA include this driver.
629
630	  If unsure, say N.
631
632config PATA_MPC52xx
633	tristate "Freescale MPC52xx SoC internal IDE"
634	depends on PPC_MPC52xx && PPC_BESTCOMM
635	select PPC_BESTCOMM_ATA
636	help
637	  This option enables support for integrated IDE controller
638	  of the Freescale MPC52xx SoC.
639
640	  If unsure, say N.
641
642config PATA_NETCELL
643	tristate "NETCELL Revolution RAID support"
644	depends on PCI
645	help
646	  This option enables support for the Netcell Revolution RAID
647	  PATA controller.
648
649	  If unsure, say N.
650
651config PATA_NINJA32
652	tristate "Ninja32/Delkin Cardbus ATA support"
653	depends on PCI
654	help
655	  This option enables support for the Ninja32, Delkin and
656	  possibly other brands of Cardbus ATA adapter
657
658	  If unsure, say N.
659
660config PATA_NS87415
661	tristate "Nat Semi NS87415 PATA support"
662	depends on PCI
663	help
664	  This option enables support for the National Semiconductor
665	  NS87415 PCI-IDE controller.
666
667	  If unsure, say N.
668
669config PATA_OLDPIIX
670	tristate "Intel PATA old PIIX support"
671	depends on PCI
672	help
673	  This option enables support for early PIIX PATA support.
674
675	  If unsure, say N.
676
677config PATA_OPTIDMA
678	tristate "OPTI FireStar PATA support (Very Experimental)"
679	depends on PCI
680	help
681	  This option enables DMA/PIO support for the later OPTi
682	  controllers found on some old motherboards and in some
683	  laptops.
684
685	  If unsure, say N.
686
687config PATA_PDC2027X
688	tristate "Promise PATA 2027x support"
689	depends on PCI
690	help
691	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
692
693	  If unsure, say N.
694
695config PATA_PDC_OLD
696	tristate "Older Promise PATA controller support"
697	depends on PCI
698	help
699	  This option enables support for the Promise 20246, 20262, 20263,
700	  20265 and 20267 adapters.
701
702	  If unsure, say N.
703
704config PATA_RADISYS
705	tristate "RADISYS 82600 PATA support (Experimental)"
706	depends on PCI
707	help
708	  This option enables support for the RADISYS 82600
709	  PATA controllers via the new ATA layer
710
711	  If unsure, say N.
712
713config PATA_RDC
714	tristate "RDC PATA support"
715	depends on PCI
716	help
717	  This option enables basic support for the later RDC PATA controllers
718	  controllers via the new ATA layer. For the RDC 1010, you need to
719	  enable the IT821X driver instead.
720
721	  If unsure, say N.
722
723config PATA_SC1200
724	tristate "SC1200 PATA support"
725	depends on PCI && (X86_32 || COMPILE_TEST)
726	help
727	  This option enables support for the NatSemi/AMD SC1200 SoC
728	  companion chip used with the Geode processor family.
729
730	  If unsure, say N.
731
732config PATA_SCC
733	tristate "Toshiba's Cell Reference Set IDE support"
734	depends on PCI && PPC_CELLEB
735	help
736	  This option enables support for the built-in IDE controller on
737	  Toshiba Cell Reference Board.
738
739	  If unsure, say N.
740
741config PATA_SCH
742	tristate "Intel SCH PATA support"
743	depends on PCI
744	help
745	  This option enables support for Intel SCH PATA on the Intel
746	  SCH (US15W, US15L, UL11L) series host controllers.
747
748	  If unsure, say N.
749
750config PATA_SERVERWORKS
751	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
752	depends on PCI
753	help
754	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
755	  HT1000 PATA controllers, via the new ATA layer.
756
757	  If unsure, say N.
758
759config PATA_SIL680
760	tristate "CMD / Silicon Image 680 PATA support"
761	depends on PCI
762	help
763	  This option enables support for CMD / Silicon Image 680 PATA.
764
765	  If unsure, say N.
766
767config PATA_SIS
768	tristate "SiS PATA support"
769	depends on PCI
770	help
771	  This option enables support for SiS PATA controllers
772
773	  If unsure, say N.
774
775config PATA_TOSHIBA
776	tristate "Toshiba Piccolo support (Experimental)"
777	depends on PCI
778	help
779	  Support for the Toshiba Piccolo controllers. Currently only the
780	  primary channel is supported by this driver.
781
782	  If unsure, say N.
783
784config PATA_TRIFLEX
785	tristate "Compaq Triflex PATA support"
786	depends on PCI
787	help
788	  Enable support for the Compaq 'Triflex' IDE controller as found
789	  on many Compaq Pentium-Pro systems, via the new ATA layer.
790
791	  If unsure, say N.
792
793config PATA_VIA
794	tristate "VIA PATA support"
795	depends on PCI
796	help
797	  This option enables support for the VIA PATA interfaces
798	  found on the many VIA chipsets.
799
800	  If unsure, say N.
801
802config PATA_PXA
803	tristate "PXA DMA-capable PATA support"
804	depends on ARCH_PXA
805	help
806	  This option enables support for harddrive attached to PXA CPU's bus.
807
808	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
809	        is not capable of doing MWDMA, use pata_platform instead.
810
811	  If unsure, say N.
812
813config PATA_WINBOND
814	tristate "Winbond SL82C105 PATA support"
815	depends on PCI
816	help
817	  This option enables support for SL82C105 PATA devices found in the
818	  Netwinder and some other systems
819
820	  If unsure, say N.
821
822endif # ATA_BMDMA
823
824comment "PIO-only SFF controllers"
825
826config PATA_AT32
827	tristate "Atmel AVR32 PATA support (Experimental)"
828	depends on AVR32 && PLATFORM_AT32AP
829	help
830	  This option enables support for the IDE devices on the
831	  Atmel AT32AP platform.
832
833	  If unsure, say N.
834
835config PATA_AT91
836	tristate "PATA support for AT91SAM9260"
837	depends on ARM && SOC_AT91SAM9
838	help
839	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
840
841	  If unsure, say N.
842
843config PATA_CMD640_PCI
844	tristate "CMD640 PCI PATA support (Experimental)"
845	depends on PCI
846	help
847	  This option enables support for the CMD640 PCI IDE
848	  interface chip. Only the primary channel is currently
849	  supported.
850
851	  If unsure, say N.
852
853config PATA_ISAPNP
854	tristate "ISA Plug and Play PATA support"
855	depends on ISAPNP
856	help
857	  This option enables support for ISA plug & play ATA
858	  controllers such as those found on old soundcards.
859
860	  If unsure, say N.
861
862config PATA_IXP4XX_CF
863	tristate "IXP4XX Compact Flash support"
864	depends on ARCH_IXP4XX
865	help
866	  This option enables support for a Compact Flash connected on
867	  the ixp4xx expansion bus. This driver had been written for
868	  Loft/Avila boards in mind but can work with others.
869
870	  If unsure, say N.
871
872config PATA_MPIIX
873	tristate "Intel PATA MPIIX support"
874	depends on PCI
875	help
876	  This option enables support for MPIIX PATA support.
877
878	  If unsure, say N.
879
880config PATA_NS87410
881	tristate "Nat Semi NS87410 PATA support"
882	depends on PCI
883	help
884	  This option enables support for the National Semiconductor
885	  NS87410 PCI-IDE controller.
886
887	  If unsure, say N.
888
889config PATA_OPTI
890	tristate "OPTI621/6215 PATA support (Very Experimental)"
891	depends on PCI
892	help
893	  This option enables full PIO support for the early Opti ATA
894	  controllers found on some old motherboards.
895
896	  If unsure, say N.
897
898config PATA_PALMLD
899	tristate "Palm LifeDrive PATA support"
900	depends on MACH_PALMLD
901	help
902	  This option enables support for Palm LifeDrive's internal ATA
903	  port via the new ATA layer.
904
905	  If unsure, say N.
906
907config PATA_PCMCIA
908	tristate "PCMCIA PATA support"
909	depends on PCMCIA
910	help
911	  This option enables support for PCMCIA ATA interfaces, including
912	  compact flash card adapters via the new ATA layer.
913
914	  If unsure, say N.
915
916config PATA_PLATFORM
917	tristate "Generic platform device PATA support"
918	depends on EXPERT || PPC || HAVE_PATA_PLATFORM
919	help
920	  This option enables support for generic directly connected ATA
921	  devices commonly found on embedded systems.
922
923	  If unsure, say N.
924
925config PATA_OF_PLATFORM
926	tristate "OpenFirmware platform device PATA support"
927	depends on PATA_PLATFORM && OF
928	help
929	  This option enables support for generic directly connected ATA
930	  devices commonly found on embedded systems with OpenFirmware
931	  bindings.
932
933	  If unsure, say N.
934
935config PATA_QDI
936	tristate "QDI VLB PATA support"
937	depends on ISA
938	select PATA_LEGACY
939	help
940	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
941
942config PATA_RB532
943	tristate "RouterBoard 532 PATA CompactFlash support"
944	depends on MIKROTIK_RB532
945	help
946	  This option enables support for the RouterBoard 532
947	  PATA CompactFlash controller.
948
949	  If unsure, say N.
950
951config PATA_RZ1000
952	tristate "PC Tech RZ1000 PATA support"
953	depends on PCI
954	help
955	  This option enables basic support for the PC Tech RZ1000/1
956	  PATA controllers via the new ATA layer
957
958	  If unsure, say N.
959
960config PATA_SAMSUNG_CF
961	tristate "Samsung SoC PATA support"
962	depends on SAMSUNG_DEV_IDE
963	help
964	  This option enables basic support for Samsung's S3C/S5P board
965	  PATA controllers via the new ATA layer
966
967	  If unsure, say N.
968
969config PATA_WINBOND_VLB
970	tristate "Winbond W83759A VLB PATA support (Experimental)"
971	depends on ISA
972	select PATA_LEGACY
973	help
974	  Support for the Winbond W83759A controller on Vesa Local Bus
975	  systems.
976
977comment "Generic fallback / legacy drivers"
978
979config PATA_ACPI
980	tristate "ACPI firmware driver for PATA"
981	depends on ATA_ACPI && ATA_BMDMA
982	help
983	  This option enables an ACPI method driver which drives
984	  motherboard PATA controller interfaces through the ACPI
985	  firmware in the BIOS. This driver can sometimes handle
986	  otherwise unsupported hardware.
987
988config ATA_GENERIC
989	tristate "Generic ATA support"
990	depends on PCI && ATA_BMDMA
991	help
992	  This option enables support for generic BIOS configured
993	  ATA controllers via the new ATA layer
994
995	  If unsure, say N.
996
997config PATA_LEGACY
998	tristate "Legacy ISA PATA support (Experimental)"
999	depends on (ISA || PCI)
1000	help
1001	  This option enables support for ISA/VLB/PCI bus legacy PATA
1002	  ports and allows them to be accessed via the new ATA layer.
1003
1004	  If unsure, say N.
1005
1006endif # ATA_SFF
1007endif # ATA
1008