1/* 2 * sata_via.c - VIA Serial ATA controllers 3 * 4 * Maintained by: Tejun Heo <tj@kernel.org> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved. 9 * Copyright 2003-2004 Jeff Garzik 10 * 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * 27 * libata documentation is available via 'make {ps|pdf}docs', 28 * as Documentation/DocBook/libata.* 29 * 30 * Hardware documentation available under NDA. 31 * 32 * 33 * 34 */ 35 36#include <linux/kernel.h> 37#include <linux/module.h> 38#include <linux/pci.h> 39#include <linux/blkdev.h> 40#include <linux/delay.h> 41#include <linux/device.h> 42#include <scsi/scsi.h> 43#include <scsi/scsi_cmnd.h> 44#include <scsi/scsi_host.h> 45#include <linux/libata.h> 46 47#define DRV_NAME "sata_via" 48#define DRV_VERSION "2.6" 49 50/* 51 * vt8251 is different from other sata controllers of VIA. It has two 52 * channels, each channel has both Master and Slave slot. 53 */ 54enum board_ids_enum { 55 vt6420, 56 vt6421, 57 vt8251, 58}; 59 60enum { 61 SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ 62 SATA_INT_GATE = 0x41, /* SATA interrupt gating */ 63 SATA_NATIVE_MODE = 0x42, /* Native mode enable */ 64 PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ 65 PATA_PIO_TIMING = 0xAB, /* PATA timing register */ 66 67 PORT0 = (1 << 1), 68 PORT1 = (1 << 0), 69 ALL_PORTS = PORT0 | PORT1, 70 71 NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), 72 73 SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ 74}; 75 76static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); 77static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); 78static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); 79static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); 80static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); 81static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); 82static void svia_noop_freeze(struct ata_port *ap); 83static int vt6420_prereset(struct ata_link *link, unsigned long deadline); 84static void vt6420_bmdma_start(struct ata_queued_cmd *qc); 85static int vt6421_pata_cable_detect(struct ata_port *ap); 86static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); 87static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); 88 89static const struct pci_device_id svia_pci_tbl[] = { 90 { PCI_VDEVICE(VIA, 0x5337), vt6420 }, 91 { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ 92 { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ 93 { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ 94 { PCI_VDEVICE(VIA, 0x5372), vt6420 }, 95 { PCI_VDEVICE(VIA, 0x7372), vt6420 }, 96 { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ 97 { PCI_VDEVICE(VIA, 0x9000), vt8251 }, 98 99 { } /* terminate list */ 100}; 101 102static struct pci_driver svia_pci_driver = { 103 .name = DRV_NAME, 104 .id_table = svia_pci_tbl, 105 .probe = svia_init_one, 106#ifdef CONFIG_PM_SLEEP 107 .suspend = ata_pci_device_suspend, 108 .resume = ata_pci_device_resume, 109#endif 110 .remove = ata_pci_remove_one, 111}; 112 113static struct scsi_host_template svia_sht = { 114 ATA_BMDMA_SHT(DRV_NAME), 115}; 116 117static struct ata_port_operations svia_base_ops = { 118 .inherits = &ata_bmdma_port_ops, 119 .sff_tf_load = svia_tf_load, 120}; 121 122static struct ata_port_operations vt6420_sata_ops = { 123 .inherits = &svia_base_ops, 124 .freeze = svia_noop_freeze, 125 .prereset = vt6420_prereset, 126 .bmdma_start = vt6420_bmdma_start, 127}; 128 129static struct ata_port_operations vt6421_pata_ops = { 130 .inherits = &svia_base_ops, 131 .cable_detect = vt6421_pata_cable_detect, 132 .set_piomode = vt6421_set_pio_mode, 133 .set_dmamode = vt6421_set_dma_mode, 134}; 135 136static struct ata_port_operations vt6421_sata_ops = { 137 .inherits = &svia_base_ops, 138 .scr_read = svia_scr_read, 139 .scr_write = svia_scr_write, 140}; 141 142static struct ata_port_operations vt8251_ops = { 143 .inherits = &svia_base_ops, 144 .hardreset = sata_std_hardreset, 145 .scr_read = vt8251_scr_read, 146 .scr_write = vt8251_scr_write, 147}; 148 149static const struct ata_port_info vt6420_port_info = { 150 .flags = ATA_FLAG_SATA, 151 .pio_mask = ATA_PIO4, 152 .mwdma_mask = ATA_MWDMA2, 153 .udma_mask = ATA_UDMA6, 154 .port_ops = &vt6420_sata_ops, 155}; 156 157static struct ata_port_info vt6421_sport_info = { 158 .flags = ATA_FLAG_SATA, 159 .pio_mask = ATA_PIO4, 160 .mwdma_mask = ATA_MWDMA2, 161 .udma_mask = ATA_UDMA6, 162 .port_ops = &vt6421_sata_ops, 163}; 164 165static struct ata_port_info vt6421_pport_info = { 166 .flags = ATA_FLAG_SLAVE_POSS, 167 .pio_mask = ATA_PIO4, 168 /* No MWDMA */ 169 .udma_mask = ATA_UDMA6, 170 .port_ops = &vt6421_pata_ops, 171}; 172 173static struct ata_port_info vt8251_port_info = { 174 .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS, 175 .pio_mask = ATA_PIO4, 176 .mwdma_mask = ATA_MWDMA2, 177 .udma_mask = ATA_UDMA6, 178 .port_ops = &vt8251_ops, 179}; 180 181MODULE_AUTHOR("Jeff Garzik"); 182MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); 183MODULE_LICENSE("GPL"); 184MODULE_DEVICE_TABLE(pci, svia_pci_tbl); 185MODULE_VERSION(DRV_VERSION); 186 187static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) 188{ 189 if (sc_reg > SCR_CONTROL) 190 return -EINVAL; 191 *val = ioread32(link->ap->ioaddr.scr_addr + (4 * sc_reg)); 192 return 0; 193} 194 195static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) 196{ 197 if (sc_reg > SCR_CONTROL) 198 return -EINVAL; 199 iowrite32(val, link->ap->ioaddr.scr_addr + (4 * sc_reg)); 200 return 0; 201} 202 203static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) 204{ 205 static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; 206 struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); 207 int slot = 2 * link->ap->port_no + link->pmp; 208 u32 v = 0; 209 u8 raw; 210 211 switch (scr) { 212 case SCR_STATUS: 213 pci_read_config_byte(pdev, 0xA0 + slot, &raw); 214 215 /* read the DET field, bit0 and 1 of the config byte */ 216 v |= raw & 0x03; 217 218 /* read the SPD field, bit4 of the configure byte */ 219 if (raw & (1 << 4)) 220 v |= 0x02 << 4; 221 else 222 v |= 0x01 << 4; 223 224 /* read the IPM field, bit2 and 3 of the config byte */ 225 v |= ipm_tbl[(raw >> 2) & 0x3]; 226 break; 227 228 case SCR_ERROR: 229 /* devices other than 5287 uses 0xA8 as base */ 230 WARN_ON(pdev->device != 0x5287); 231 pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); 232 break; 233 234 case SCR_CONTROL: 235 pci_read_config_byte(pdev, 0xA4 + slot, &raw); 236 237 /* read the DET field, bit0 and bit1 */ 238 v |= ((raw & 0x02) << 1) | (raw & 0x01); 239 240 /* read the IPM field, bit2 and bit3 */ 241 v |= ((raw >> 2) & 0x03) << 8; 242 break; 243 244 default: 245 return -EINVAL; 246 } 247 248 *val = v; 249 return 0; 250} 251 252static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) 253{ 254 struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); 255 int slot = 2 * link->ap->port_no + link->pmp; 256 u32 v = 0; 257 258 switch (scr) { 259 case SCR_ERROR: 260 /* devices other than 5287 uses 0xA8 as base */ 261 WARN_ON(pdev->device != 0x5287); 262 pci_write_config_dword(pdev, 0xB0 + slot * 4, val); 263 return 0; 264 265 case SCR_CONTROL: 266 /* set the DET field */ 267 v |= ((val & 0x4) >> 1) | (val & 0x1); 268 269 /* set the IPM field */ 270 v |= ((val >> 8) & 0x3) << 2; 271 272 pci_write_config_byte(pdev, 0xA4 + slot, v); 273 return 0; 274 275 default: 276 return -EINVAL; 277 } 278} 279 280/** 281 * svia_tf_load - send taskfile registers to host controller 282 * @ap: Port to which output is sent 283 * @tf: ATA taskfile register set 284 * 285 * Outputs ATA taskfile to standard ATA host controller. 286 * 287 * This is to fix the internal bug of via chipsets, which will 288 * reset the device register after changing the IEN bit on ctl 289 * register. 290 */ 291static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) 292{ 293 struct ata_taskfile ttf; 294 295 if (tf->ctl != ap->last_ctl) { 296 ttf = *tf; 297 ttf.flags |= ATA_TFLAG_DEVICE; 298 tf = &ttf; 299 } 300 ata_sff_tf_load(ap, tf); 301} 302 303static void svia_noop_freeze(struct ata_port *ap) 304{ 305 /* Some VIA controllers choke if ATA_NIEN is manipulated in 306 * certain way. Leave it alone and just clear pending IRQ. 307 */ 308 ap->ops->sff_check_status(ap); 309 ata_bmdma_irq_clear(ap); 310} 311 312/** 313 * vt6420_prereset - prereset for vt6420 314 * @link: target ATA link 315 * @deadline: deadline jiffies for the operation 316 * 317 * SCR registers on vt6420 are pieces of shit and may hang the 318 * whole machine completely if accessed with the wrong timing. 319 * To avoid such catastrophe, vt6420 doesn't provide generic SCR 320 * access operations, but uses SStatus and SControl only during 321 * boot probing in controlled way. 322 * 323 * As the old (pre EH update) probing code is proven to work, we 324 * strictly follow the access pattern. 325 * 326 * LOCKING: 327 * Kernel thread context (may sleep) 328 * 329 * RETURNS: 330 * 0 on success, -errno otherwise. 331 */ 332static int vt6420_prereset(struct ata_link *link, unsigned long deadline) 333{ 334 struct ata_port *ap = link->ap; 335 struct ata_eh_context *ehc = &ap->link.eh_context; 336 unsigned long timeout = jiffies + (HZ * 5); 337 u32 sstatus, scontrol; 338 int online; 339 340 /* don't do any SCR stuff if we're not loading */ 341 if (!(ap->pflags & ATA_PFLAG_LOADING)) 342 goto skip_scr; 343 344 /* Resume phy. This is the old SATA resume sequence */ 345 svia_scr_write(link, SCR_CONTROL, 0x300); 346 svia_scr_read(link, SCR_CONTROL, &scontrol); /* flush */ 347 348 /* wait for phy to become ready, if necessary */ 349 do { 350 ata_msleep(link->ap, 200); 351 svia_scr_read(link, SCR_STATUS, &sstatus); 352 if ((sstatus & 0xf) != 1) 353 break; 354 } while (time_before(jiffies, timeout)); 355 356 /* open code sata_print_link_status() */ 357 svia_scr_read(link, SCR_STATUS, &sstatus); 358 svia_scr_read(link, SCR_CONTROL, &scontrol); 359 360 online = (sstatus & 0xf) == 0x3; 361 362 ata_port_info(ap, 363 "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n", 364 online ? "up" : "down", sstatus, scontrol); 365 366 /* SStatus is read one more time */ 367 svia_scr_read(link, SCR_STATUS, &sstatus); 368 369 if (!online) { 370 /* tell EH to bail */ 371 ehc->i.action &= ~ATA_EH_RESET; 372 return 0; 373 } 374 375 skip_scr: 376 /* wait for !BSY */ 377 ata_sff_wait_ready(link, deadline); 378 379 return 0; 380} 381 382static void vt6420_bmdma_start(struct ata_queued_cmd *qc) 383{ 384 struct ata_port *ap = qc->ap; 385 if ((qc->tf.command == ATA_CMD_PACKET) && 386 (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) { 387 /* Prevents corruption on some ATAPI burners */ 388 ata_sff_pause(ap); 389 } 390 ata_bmdma_start(qc); 391} 392 393static int vt6421_pata_cable_detect(struct ata_port *ap) 394{ 395 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 396 u8 tmp; 397 398 pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp); 399 if (tmp & 0x10) 400 return ATA_CBL_PATA40; 401 return ATA_CBL_PATA80; 402} 403 404static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) 405{ 406 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 407 static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; 408 pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno, 409 pio_bits[adev->pio_mode - XFER_PIO_0]); 410} 411 412static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) 413{ 414 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 415 static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; 416 pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno, 417 udma_bits[adev->dma_mode - XFER_UDMA_0]); 418} 419 420static const unsigned int svia_bar_sizes[] = { 421 8, 4, 8, 4, 16, 256 422}; 423 424static const unsigned int vt6421_bar_sizes[] = { 425 16, 16, 16, 16, 32, 128 426}; 427 428static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port) 429{ 430 return addr + (port * 128); 431} 432 433static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port) 434{ 435 return addr + (port * 64); 436} 437 438static void vt6421_init_addrs(struct ata_port *ap) 439{ 440 void __iomem * const * iomap = ap->host->iomap; 441 void __iomem *reg_addr = iomap[ap->port_no]; 442 void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8); 443 struct ata_ioports *ioaddr = &ap->ioaddr; 444 445 ioaddr->cmd_addr = reg_addr; 446 ioaddr->altstatus_addr = 447 ioaddr->ctl_addr = (void __iomem *) 448 ((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS); 449 ioaddr->bmdma_addr = bmdma_addr; 450 ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); 451 452 ata_sff_std_ports(ioaddr); 453 454 ata_port_pbar_desc(ap, ap->port_no, -1, "port"); 455 ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); 456} 457 458static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) 459{ 460 const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL }; 461 struct ata_host *host; 462 int rc; 463 464 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); 465 if (rc) 466 return rc; 467 *r_host = host; 468 469 rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); 470 if (rc) { 471 dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n"); 472 return rc; 473 } 474 475 host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0); 476 host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1); 477 478 return 0; 479} 480 481static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) 482{ 483 const struct ata_port_info *ppi[] = 484 { &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info }; 485 struct ata_host *host; 486 int i, rc; 487 488 *r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi)); 489 if (!host) { 490 dev_err(&pdev->dev, "failed to allocate host\n"); 491 return -ENOMEM; 492 } 493 494 rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); 495 if (rc) { 496 dev_err(&pdev->dev, "failed to request/iomap PCI BARs (errno=%d)\n", 497 rc); 498 return rc; 499 } 500 host->iomap = pcim_iomap_table(pdev); 501 502 for (i = 0; i < host->n_ports; i++) 503 vt6421_init_addrs(host->ports[i]); 504 505 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); 506 if (rc) 507 return rc; 508 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); 509 if (rc) 510 return rc; 511 512 return 0; 513} 514 515static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) 516{ 517 const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; 518 struct ata_host *host; 519 int i, rc; 520 521 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); 522 if (rc) 523 return rc; 524 *r_host = host; 525 526 rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); 527 if (rc) { 528 dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n"); 529 return rc; 530 } 531 532 /* 8251 hosts four sata ports as M/S of the two channels */ 533 for (i = 0; i < host->n_ports; i++) 534 ata_slave_link_init(host->ports[i]); 535 536 return 0; 537} 538 539static void svia_configure(struct pci_dev *pdev, int board_id) 540{ 541 u8 tmp8; 542 543 pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); 544 dev_info(&pdev->dev, "routed to hard irq line %d\n", 545 (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); 546 547 /* make sure SATA channels are enabled */ 548 pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); 549 if ((tmp8 & ALL_PORTS) != ALL_PORTS) { 550 dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n", 551 (int)tmp8); 552 tmp8 |= ALL_PORTS; 553 pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); 554 } 555 556 /* make sure interrupts for each channel sent to us */ 557 pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); 558 if ((tmp8 & ALL_PORTS) != ALL_PORTS) { 559 dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n", 560 (int) tmp8); 561 tmp8 |= ALL_PORTS; 562 pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); 563 } 564 565 /* make sure native mode is enabled */ 566 pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); 567 if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { 568 dev_dbg(&pdev->dev, 569 "enabling SATA channel native mode (0x%x)\n", 570 (int) tmp8); 571 tmp8 |= NATIVE_MODE_ALL; 572 pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); 573 } 574 575 /* 576 * vt6420/1 has problems talking to some drives. The following 577 * is the fix from Joseph Chan <JosephChan@via.com.tw>. 578 * 579 * When host issues HOLD, device may send up to 20DW of data 580 * before acknowledging it with HOLDA and the host should be 581 * able to buffer them in FIFO. Unfortunately, some WD drives 582 * send up to 40DW before acknowledging HOLD and, in the 583 * default configuration, this ends up overflowing vt6421's 584 * FIFO, making the controller abort the transaction with 585 * R_ERR. 586 * 587 * Rx52[2] is the internal 128DW FIFO Flow control watermark 588 * adjusting mechanism enable bit and the default value 0 589 * means host will issue HOLD to device when the left FIFO 590 * size goes below 32DW. Setting it to 1 makes the watermark 591 * 64DW. 592 * 593 * https://bugzilla.kernel.org/show_bug.cgi?id=15173 594 * http://article.gmane.org/gmane.linux.ide/46352 595 * http://thread.gmane.org/gmane.linux.kernel/1062139 596 */ 597 if (board_id == vt6420 || board_id == vt6421) { 598 pci_read_config_byte(pdev, 0x52, &tmp8); 599 tmp8 |= 1 << 2; 600 pci_write_config_byte(pdev, 0x52, tmp8); 601 } 602} 603 604static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 605{ 606 unsigned int i; 607 int rc; 608 struct ata_host *host = NULL; 609 int board_id = (int) ent->driver_data; 610 const unsigned *bar_sizes; 611 612 ata_print_version_once(&pdev->dev, DRV_VERSION); 613 614 rc = pcim_enable_device(pdev); 615 if (rc) 616 return rc; 617 618 if (board_id == vt6421) 619 bar_sizes = &vt6421_bar_sizes[0]; 620 else 621 bar_sizes = &svia_bar_sizes[0]; 622 623 for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) 624 if ((pci_resource_start(pdev, i) == 0) || 625 (pci_resource_len(pdev, i) < bar_sizes[i])) { 626 dev_err(&pdev->dev, 627 "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", 628 i, 629 (unsigned long long)pci_resource_start(pdev, i), 630 (unsigned long long)pci_resource_len(pdev, i)); 631 return -ENODEV; 632 } 633 634 switch (board_id) { 635 case vt6420: 636 rc = vt6420_prepare_host(pdev, &host); 637 break; 638 case vt6421: 639 rc = vt6421_prepare_host(pdev, &host); 640 break; 641 case vt8251: 642 rc = vt8251_prepare_host(pdev, &host); 643 break; 644 default: 645 rc = -EINVAL; 646 } 647 if (rc) 648 return rc; 649 650 svia_configure(pdev, board_id); 651 652 pci_set_master(pdev); 653 return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, 654 IRQF_SHARED, &svia_sht); 655} 656 657module_pci_driver(svia_pci_driver); 658