1/* 2 * Copyright © 2013 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Author: Jani Nikula <jani.nikula@intel.com> 24 */ 25 26#include <drm/drmP.h> 27#include <drm/drm_crtc.h> 28#include <drm/drm_edid.h> 29#include <drm/i915_drm.h> 30#include <linux/slab.h> 31#include "i915_drv.h" 32#include "intel_drv.h" 33#include "intel_dsi.h" 34#include "intel_dsi_cmd.h" 35 36/* the sub-encoders aka panel drivers */ 37static const struct intel_dsi_device intel_dsi_devices[] = { 38 { 39 .panel_id = MIPI_DSI_GENERIC_PANEL_ID, 40 .name = "vbt-generic-dsi-vid-mode-display", 41 .dev_ops = &vbt_generic_dsi_display_ops, 42 }, 43}; 44 45static void band_gap_reset(struct drm_i915_private *dev_priv) 46{ 47 mutex_lock(&dev_priv->dpio_lock); 48 49 vlv_flisdsi_write(dev_priv, 0x08, 0x0001); 50 vlv_flisdsi_write(dev_priv, 0x0F, 0x0005); 51 vlv_flisdsi_write(dev_priv, 0x0F, 0x0025); 52 udelay(150); 53 vlv_flisdsi_write(dev_priv, 0x0F, 0x0000); 54 vlv_flisdsi_write(dev_priv, 0x08, 0x0000); 55 56 mutex_unlock(&dev_priv->dpio_lock); 57} 58 59static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector) 60{ 61 return container_of(intel_attached_encoder(connector), 62 struct intel_dsi, base); 63} 64 65static inline bool is_vid_mode(struct intel_dsi *intel_dsi) 66{ 67 return intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE; 68} 69 70static inline bool is_cmd_mode(struct intel_dsi *intel_dsi) 71{ 72 return intel_dsi->operation_mode == INTEL_DSI_COMMAND_MODE; 73} 74 75static void intel_dsi_hot_plug(struct intel_encoder *encoder) 76{ 77 DRM_DEBUG_KMS("\n"); 78} 79 80static bool intel_dsi_compute_config(struct intel_encoder *encoder, 81 struct intel_crtc_config *config) 82{ 83 struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi, 84 base); 85 struct intel_connector *intel_connector = intel_dsi->attached_connector; 86 struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; 87 struct drm_display_mode *adjusted_mode = &config->adjusted_mode; 88 struct drm_display_mode *mode = &config->requested_mode; 89 90 DRM_DEBUG_KMS("\n"); 91 92 if (fixed_mode) 93 intel_fixed_panel_mode(fixed_mode, adjusted_mode); 94 95 /* DSI uses short packets for sync events, so clear mode flags for DSI */ 96 adjusted_mode->flags = 0; 97 98 if (intel_dsi->dev.dev_ops->mode_fixup) 99 return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev, 100 mode, adjusted_mode); 101 102 return true; 103} 104 105static void intel_dsi_device_ready(struct intel_encoder *encoder) 106{ 107 struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; 108 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 109 int pipe = intel_crtc->pipe; 110 u32 val; 111 112 DRM_DEBUG_KMS("\n"); 113 114 mutex_lock(&dev_priv->dpio_lock); 115 /* program rcomp for compliance, reduce from 50 ohms to 45 ohms 116 * needed everytime after power gate */ 117 vlv_flisdsi_write(dev_priv, 0x04, 0x0004); 118 mutex_unlock(&dev_priv->dpio_lock); 119 120 /* bandgap reset is needed after everytime we do power gate */ 121 band_gap_reset(dev_priv); 122 123 I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); 124 usleep_range(2500, 3000); 125 126 val = I915_READ(MIPI_PORT_CTRL(pipe)); 127 I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); 128 usleep_range(1000, 1500); 129 130 I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); 131 usleep_range(2500, 3000); 132 133 I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); 134 usleep_range(2500, 3000); 135} 136 137static void intel_dsi_enable(struct intel_encoder *encoder) 138{ 139 struct drm_device *dev = encoder->base.dev; 140 struct drm_i915_private *dev_priv = dev->dev_private; 141 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 142 struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); 143 int pipe = intel_crtc->pipe; 144 u32 temp; 145 146 DRM_DEBUG_KMS("\n"); 147 148 if (is_cmd_mode(intel_dsi)) 149 I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4); 150 else { 151 msleep(20); /* XXX */ 152 dpi_send_cmd(intel_dsi, TURN_ON, DPI_LP_MODE_EN); 153 msleep(100); 154 155 if (intel_dsi->dev.dev_ops->enable) 156 intel_dsi->dev.dev_ops->enable(&intel_dsi->dev); 157 158 wait_for_dsi_fifo_empty(intel_dsi); 159 160 /* assert ip_tg_enable signal */ 161 temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK; 162 temp = temp | intel_dsi->port_bits; 163 I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE); 164 POSTING_READ(MIPI_PORT_CTRL(pipe)); 165 } 166} 167 168static void intel_dsi_pre_enable(struct intel_encoder *encoder) 169{ 170 struct drm_device *dev = encoder->base.dev; 171 struct drm_i915_private *dev_priv = dev->dev_private; 172 struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); 173 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 174 enum pipe pipe = intel_crtc->pipe; 175 u32 tmp; 176 177 DRM_DEBUG_KMS("\n"); 178 179 /* Disable DPOunit clock gating, can stall pipe 180 * and we need DPLL REFA always enabled */ 181 tmp = I915_READ(DPLL(pipe)); 182 tmp |= DPLL_REFA_CLK_ENABLE_VLV; 183 I915_WRITE(DPLL(pipe), tmp); 184 185 /* update the hw state for DPLL */ 186 intel_crtc->config.dpll_hw_state.dpll = DPLL_INTEGRATED_CLOCK_VLV | 187 DPLL_REFA_CLK_ENABLE_VLV; 188 189 tmp = I915_READ(DSPCLK_GATE_D); 190 tmp |= DPOUNIT_CLOCK_GATE_DISABLE; 191 I915_WRITE(DSPCLK_GATE_D, tmp); 192 193 /* put device in ready state */ 194 intel_dsi_device_ready(encoder); 195 196 msleep(intel_dsi->panel_on_delay); 197 198 if (intel_dsi->dev.dev_ops->panel_reset) 199 intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); 200 201 if (intel_dsi->dev.dev_ops->send_otp_cmds) 202 intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); 203 204 wait_for_dsi_fifo_empty(intel_dsi); 205 206 /* Enable port in pre-enable phase itself because as per hw team 207 * recommendation, port should be enabled befor plane & pipe */ 208 intel_dsi_enable(encoder); 209} 210 211static void intel_dsi_enable_nop(struct intel_encoder *encoder) 212{ 213 DRM_DEBUG_KMS("\n"); 214 215 /* for DSI port enable has to be done before pipe 216 * and plane enable, so port enable is done in 217 * pre_enable phase itself unlike other encoders 218 */ 219} 220 221static void intel_dsi_pre_disable(struct intel_encoder *encoder) 222{ 223 struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); 224 225 DRM_DEBUG_KMS("\n"); 226 227 if (is_vid_mode(intel_dsi)) { 228 /* Send Shutdown command to the panel in LP mode */ 229 dpi_send_cmd(intel_dsi, SHUTDOWN, DPI_LP_MODE_EN); 230 msleep(10); 231 } 232} 233 234static void intel_dsi_disable(struct intel_encoder *encoder) 235{ 236 struct drm_device *dev = encoder->base.dev; 237 struct drm_i915_private *dev_priv = dev->dev_private; 238 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 239 struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); 240 int pipe = intel_crtc->pipe; 241 u32 temp; 242 243 DRM_DEBUG_KMS("\n"); 244 245 if (is_vid_mode(intel_dsi)) { 246 wait_for_dsi_fifo_empty(intel_dsi); 247 248 /* de-assert ip_tg_enable signal */ 249 temp = I915_READ(MIPI_PORT_CTRL(pipe)); 250 I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE); 251 POSTING_READ(MIPI_PORT_CTRL(pipe)); 252 253 msleep(2); 254 } 255 256 /* Panel commands can be sent when clock is in LP11 */ 257 I915_WRITE(MIPI_DEVICE_READY(pipe), 0x0); 258 259 temp = I915_READ(MIPI_CTRL(pipe)); 260 temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; 261 I915_WRITE(MIPI_CTRL(pipe), temp | 262 intel_dsi->escape_clk_div << 263 ESCAPE_CLOCK_DIVIDER_SHIFT); 264 265 I915_WRITE(MIPI_EOT_DISABLE(pipe), CLOCKSTOP); 266 267 temp = I915_READ(MIPI_DSI_FUNC_PRG(pipe)); 268 temp &= ~VID_MODE_FORMAT_MASK; 269 I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), temp); 270 271 I915_WRITE(MIPI_DEVICE_READY(pipe), 0x1); 272 273 /* if disable packets are sent before sending shutdown packet then in 274 * some next enable sequence send turn on packet error is observed */ 275 if (intel_dsi->dev.dev_ops->disable) 276 intel_dsi->dev.dev_ops->disable(&intel_dsi->dev); 277 278 wait_for_dsi_fifo_empty(intel_dsi); 279} 280 281static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) 282{ 283 struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; 284 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 285 int pipe = intel_crtc->pipe; 286 u32 val; 287 288 DRM_DEBUG_KMS("\n"); 289 290 I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); 291 usleep_range(2000, 2500); 292 293 I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); 294 usleep_range(2000, 2500); 295 296 I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); 297 usleep_range(2000, 2500); 298 299 if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT) 300 == 0x00000), 30)) 301 DRM_ERROR("DSI LP not going Low\n"); 302 303 val = I915_READ(MIPI_PORT_CTRL(pipe)); 304 I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); 305 usleep_range(1000, 1500); 306 307 I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); 308 usleep_range(2000, 2500); 309 310 vlv_disable_dsi_pll(encoder); 311} 312 313static void intel_dsi_post_disable(struct intel_encoder *encoder) 314{ 315 struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; 316 struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); 317 u32 val; 318 319 DRM_DEBUG_KMS("\n"); 320 321 intel_dsi_disable(encoder); 322 323 intel_dsi_clear_device_ready(encoder); 324 325 val = I915_READ(DSPCLK_GATE_D); 326 val &= ~DPOUNIT_CLOCK_GATE_DISABLE; 327 I915_WRITE(DSPCLK_GATE_D, val); 328 329 if (intel_dsi->dev.dev_ops->disable_panel_power) 330 intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev); 331 332 msleep(intel_dsi->panel_off_delay); 333 msleep(intel_dsi->panel_pwr_cycle_delay); 334} 335 336static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, 337 enum pipe *pipe) 338{ 339 struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; 340 enum intel_display_power_domain power_domain; 341 u32 port, func; 342 enum pipe p; 343 344 DRM_DEBUG_KMS("\n"); 345 346 power_domain = intel_display_port_power_domain(encoder); 347 if (!intel_display_power_enabled(dev_priv, power_domain)) 348 return false; 349 350 /* XXX: this only works for one DSI output */ 351 for (p = PIPE_A; p <= PIPE_B; p++) { 352 port = I915_READ(MIPI_PORT_CTRL(p)); 353 func = I915_READ(MIPI_DSI_FUNC_PRG(p)); 354 355 if ((port & DPI_ENABLE) || (func & CMD_MODE_DATA_WIDTH_MASK)) { 356 if (I915_READ(MIPI_DEVICE_READY(p)) & DEVICE_READY) { 357 *pipe = p; 358 return true; 359 } 360 } 361 } 362 363 return false; 364} 365 366static void intel_dsi_get_config(struct intel_encoder *encoder, 367 struct intel_crtc_config *pipe_config) 368{ 369 u32 pclk; 370 DRM_DEBUG_KMS("\n"); 371 372 /* 373 * DPLL_MD is not used in case of DSI, reading will get some default value 374 * set dpll_md = 0 375 */ 376 pipe_config->dpll_hw_state.dpll_md = 0; 377 378 pclk = vlv_get_dsi_pclk(encoder, pipe_config->pipe_bpp); 379 if (!pclk) 380 return; 381 382 pipe_config->adjusted_mode.crtc_clock = pclk; 383 pipe_config->port_clock = pclk; 384} 385 386static enum drm_mode_status 387intel_dsi_mode_valid(struct drm_connector *connector, 388 struct drm_display_mode *mode) 389{ 390 struct intel_connector *intel_connector = to_intel_connector(connector); 391 struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; 392 struct intel_dsi *intel_dsi = intel_attached_dsi(connector); 393 394 DRM_DEBUG_KMS("\n"); 395 396 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { 397 DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n"); 398 return MODE_NO_DBLESCAN; 399 } 400 401 if (fixed_mode) { 402 if (mode->hdisplay > fixed_mode->hdisplay) 403 return MODE_PANEL; 404 if (mode->vdisplay > fixed_mode->vdisplay) 405 return MODE_PANEL; 406 } 407 408 return intel_dsi->dev.dev_ops->mode_valid(&intel_dsi->dev, mode); 409} 410 411/* return txclkesc cycles in terms of divider and duration in us */ 412static u16 txclkesc(u32 divider, unsigned int us) 413{ 414 switch (divider) { 415 case ESCAPE_CLOCK_DIVIDER_1: 416 default: 417 return 20 * us; 418 case ESCAPE_CLOCK_DIVIDER_2: 419 return 10 * us; 420 case ESCAPE_CLOCK_DIVIDER_4: 421 return 5 * us; 422 } 423} 424 425/* return pixels in terms of txbyteclkhs */ 426static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count, 427 u16 burst_mode_ratio) 428{ 429 return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio, 430 8 * 100), lane_count); 431} 432 433static void set_dsi_timings(struct drm_encoder *encoder, 434 const struct drm_display_mode *mode) 435{ 436 struct drm_device *dev = encoder->dev; 437 struct drm_i915_private *dev_priv = dev->dev_private; 438 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); 439 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); 440 int pipe = intel_crtc->pipe; 441 unsigned int bpp = intel_crtc->config.pipe_bpp; 442 unsigned int lane_count = intel_dsi->lane_count; 443 444 u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; 445 446 hactive = mode->hdisplay; 447 hfp = mode->hsync_start - mode->hdisplay; 448 hsync = mode->hsync_end - mode->hsync_start; 449 hbp = mode->htotal - mode->hsync_end; 450 451 vfp = mode->vsync_start - mode->vdisplay; 452 vsync = mode->vsync_end - mode->vsync_start; 453 vbp = mode->vtotal - mode->vsync_end; 454 455 /* horizontal values are in terms of high speed byte clock */ 456 hactive = txbyteclkhs(hactive, bpp, lane_count, 457 intel_dsi->burst_mode_ratio); 458 hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio); 459 hsync = txbyteclkhs(hsync, bpp, lane_count, 460 intel_dsi->burst_mode_ratio); 461 hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio); 462 463 I915_WRITE(MIPI_HACTIVE_AREA_COUNT(pipe), hactive); 464 I915_WRITE(MIPI_HFP_COUNT(pipe), hfp); 465 466 /* meaningful for video mode non-burst sync pulse mode only, can be zero 467 * for non-burst sync events and burst modes */ 468 I915_WRITE(MIPI_HSYNC_PADDING_COUNT(pipe), hsync); 469 I915_WRITE(MIPI_HBP_COUNT(pipe), hbp); 470 471 /* vertical values are in terms of lines */ 472 I915_WRITE(MIPI_VFP_COUNT(pipe), vfp); 473 I915_WRITE(MIPI_VSYNC_PADDING_COUNT(pipe), vsync); 474 I915_WRITE(MIPI_VBP_COUNT(pipe), vbp); 475} 476 477static void intel_dsi_prepare(struct intel_encoder *intel_encoder) 478{ 479 struct drm_encoder *encoder = &intel_encoder->base; 480 struct drm_device *dev = encoder->dev; 481 struct drm_i915_private *dev_priv = dev->dev_private; 482 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); 483 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); 484 struct drm_display_mode *adjusted_mode = 485 &intel_crtc->config.adjusted_mode; 486 int pipe = intel_crtc->pipe; 487 unsigned int bpp = intel_crtc->config.pipe_bpp; 488 u32 val, tmp; 489 490 DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe)); 491 492 /* escape clock divider, 20MHz, shared for A and C. device ready must be 493 * off when doing this! txclkesc? */ 494 tmp = I915_READ(MIPI_CTRL(0)); 495 tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK; 496 I915_WRITE(MIPI_CTRL(0), tmp | ESCAPE_CLOCK_DIVIDER_1); 497 498 /* read request priority is per pipe */ 499 tmp = I915_READ(MIPI_CTRL(pipe)); 500 tmp &= ~READ_REQUEST_PRIORITY_MASK; 501 I915_WRITE(MIPI_CTRL(pipe), tmp | READ_REQUEST_PRIORITY_HIGH); 502 503 /* XXX: why here, why like this? handling in irq handler?! */ 504 I915_WRITE(MIPI_INTR_STAT(pipe), 0xffffffff); 505 I915_WRITE(MIPI_INTR_EN(pipe), 0xffffffff); 506 507 I915_WRITE(MIPI_DPHY_PARAM(pipe), intel_dsi->dphy_reg); 508 509 I915_WRITE(MIPI_DPI_RESOLUTION(pipe), 510 adjusted_mode->vdisplay << VERTICAL_ADDRESS_SHIFT | 511 adjusted_mode->hdisplay << HORIZONTAL_ADDRESS_SHIFT); 512 513 set_dsi_timings(encoder, adjusted_mode); 514 515 val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT; 516 if (is_cmd_mode(intel_dsi)) { 517 val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT; 518 val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */ 519 } else { 520 val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT; 521 522 /* XXX: cross-check bpp vs. pixel format? */ 523 val |= intel_dsi->pixel_format; 524 } 525 I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), val); 526 527 /* timeouts for recovery. one frame IIUC. if counter expires, EOT and 528 * stop state. */ 529 530 /* 531 * In burst mode, value greater than one DPI line Time in byte clock 532 * (txbyteclkhs) To timeout this timer 1+ of the above said value is 533 * recommended. 534 * 535 * In non-burst mode, Value greater than one DPI frame time in byte 536 * clock(txbyteclkhs) To timeout this timer 1+ of the above said value 537 * is recommended. 538 * 539 * In DBI only mode, value greater than one DBI frame time in byte 540 * clock(txbyteclkhs) To timeout this timer 1+ of the above said value 541 * is recommended. 542 */ 543 544 if (is_vid_mode(intel_dsi) && 545 intel_dsi->video_mode_format == VIDEO_MODE_BURST) { 546 I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe), 547 txbyteclkhs(adjusted_mode->htotal, bpp, 548 intel_dsi->lane_count, 549 intel_dsi->burst_mode_ratio) + 1); 550 } else { 551 I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe), 552 txbyteclkhs(adjusted_mode->vtotal * 553 adjusted_mode->htotal, 554 bpp, intel_dsi->lane_count, 555 intel_dsi->burst_mode_ratio) + 1); 556 } 557 I915_WRITE(MIPI_LP_RX_TIMEOUT(pipe), intel_dsi->lp_rx_timeout); 558 I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(pipe), intel_dsi->turn_arnd_val); 559 I915_WRITE(MIPI_DEVICE_RESET_TIMER(pipe), intel_dsi->rst_timer_val); 560 561 /* dphy stuff */ 562 563 /* in terms of low power clock */ 564 I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(intel_dsi->escape_clk_div, 100)); 565 566 val = 0; 567 if (intel_dsi->eotp_pkt == 0) 568 val |= EOT_DISABLE; 569 570 if (intel_dsi->clock_stop) 571 val |= CLOCKSTOP; 572 573 /* recovery disables */ 574 I915_WRITE(MIPI_EOT_DISABLE(pipe), val); 575 576 /* in terms of low power clock */ 577 I915_WRITE(MIPI_INIT_COUNT(pipe), intel_dsi->init_count); 578 579 /* in terms of txbyteclkhs. actual high to low switch + 580 * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK. 581 * 582 * XXX: write MIPI_STOP_STATE_STALL? 583 */ 584 I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(pipe), 585 intel_dsi->hs_to_lp_count); 586 587 /* XXX: low power clock equivalence in terms of byte clock. the number 588 * of byte clocks occupied in one low power clock. based on txbyteclkhs 589 * and txclkesc. txclkesc time / txbyteclk time * (105 + 590 * MIPI_STOP_STATE_STALL) / 105.??? 591 */ 592 I915_WRITE(MIPI_LP_BYTECLK(pipe), intel_dsi->lp_byte_clk); 593 594 /* the bw essential for transmitting 16 long packets containing 252 595 * bytes meant for dcs write memory command is programmed in this 596 * register in terms of byte clocks. based on dsi transfer rate and the 597 * number of lanes configured the time taken to transmit 16 long packets 598 * in a dsi stream varies. */ 599 I915_WRITE(MIPI_DBI_BW_CTRL(pipe), intel_dsi->bw_timer); 600 601 I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(pipe), 602 intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT | 603 intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT); 604 605 if (is_vid_mode(intel_dsi)) 606 /* Some panels might have resolution which is not a multiple of 607 * 64 like 1366 x 768. Enable RANDOM resolution support for such 608 * panels by default */ 609 I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe), 610 intel_dsi->video_frmt_cfg_bits | 611 intel_dsi->video_mode_format | 612 IP_TG_CONFIG | 613 RANDOM_DPI_DISPLAY_RESOLUTION); 614} 615 616static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder) 617{ 618 DRM_DEBUG_KMS("\n"); 619 620 intel_dsi_prepare(encoder); 621 622 vlv_enable_dsi_pll(encoder); 623} 624 625static enum drm_connector_status 626intel_dsi_detect(struct drm_connector *connector, bool force) 627{ 628 struct intel_dsi *intel_dsi = intel_attached_dsi(connector); 629 struct intel_encoder *intel_encoder = &intel_dsi->base; 630 enum intel_display_power_domain power_domain; 631 enum drm_connector_status connector_status; 632 struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private; 633 634 DRM_DEBUG_KMS("\n"); 635 power_domain = intel_display_port_power_domain(intel_encoder); 636 637 intel_display_power_get(dev_priv, power_domain); 638 connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev); 639 intel_display_power_put(dev_priv, power_domain); 640 641 return connector_status; 642} 643 644static int intel_dsi_get_modes(struct drm_connector *connector) 645{ 646 struct intel_connector *intel_connector = to_intel_connector(connector); 647 struct drm_display_mode *mode; 648 649 DRM_DEBUG_KMS("\n"); 650 651 if (!intel_connector->panel.fixed_mode) { 652 DRM_DEBUG_KMS("no fixed mode\n"); 653 return 0; 654 } 655 656 mode = drm_mode_duplicate(connector->dev, 657 intel_connector->panel.fixed_mode); 658 if (!mode) { 659 DRM_DEBUG_KMS("drm_mode_duplicate failed\n"); 660 return 0; 661 } 662 663 drm_mode_probed_add(connector, mode); 664 return 1; 665} 666 667static void intel_dsi_destroy(struct drm_connector *connector) 668{ 669 struct intel_connector *intel_connector = to_intel_connector(connector); 670 671 DRM_DEBUG_KMS("\n"); 672 intel_panel_fini(&intel_connector->panel); 673 drm_connector_cleanup(connector); 674 kfree(connector); 675} 676 677static const struct drm_encoder_funcs intel_dsi_funcs = { 678 .destroy = intel_encoder_destroy, 679}; 680 681static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = { 682 .get_modes = intel_dsi_get_modes, 683 .mode_valid = intel_dsi_mode_valid, 684 .best_encoder = intel_best_encoder, 685}; 686 687static const struct drm_connector_funcs intel_dsi_connector_funcs = { 688 .dpms = intel_connector_dpms, 689 .detect = intel_dsi_detect, 690 .destroy = intel_dsi_destroy, 691 .fill_modes = drm_helper_probe_single_connector_modes, 692}; 693 694void intel_dsi_init(struct drm_device *dev) 695{ 696 struct intel_dsi *intel_dsi; 697 struct intel_encoder *intel_encoder; 698 struct drm_encoder *encoder; 699 struct intel_connector *intel_connector; 700 struct drm_connector *connector; 701 struct drm_display_mode *fixed_mode = NULL; 702 struct drm_i915_private *dev_priv = dev->dev_private; 703 const struct intel_dsi_device *dsi; 704 unsigned int i; 705 706 DRM_DEBUG_KMS("\n"); 707 708 /* There is no detection method for MIPI so rely on VBT */ 709 if (!dev_priv->vbt.has_mipi) 710 return; 711 712 if (IS_VALLEYVIEW(dev)) { 713 dev_priv->mipi_mmio_base = VLV_MIPI_BASE; 714 } else { 715 DRM_ERROR("Unsupported Mipi device to reg base"); 716 return; 717 } 718 719 intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL); 720 if (!intel_dsi) 721 return; 722 723 intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL); 724 if (!intel_connector) { 725 kfree(intel_dsi); 726 return; 727 } 728 729 intel_encoder = &intel_dsi->base; 730 encoder = &intel_encoder->base; 731 intel_dsi->attached_connector = intel_connector; 732 733 connector = &intel_connector->base; 734 735 drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI); 736 737 /* XXX: very likely not all of these are needed */ 738 intel_encoder->hot_plug = intel_dsi_hot_plug; 739 intel_encoder->compute_config = intel_dsi_compute_config; 740 intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable; 741 intel_encoder->pre_enable = intel_dsi_pre_enable; 742 intel_encoder->enable = intel_dsi_enable_nop; 743 intel_encoder->disable = intel_dsi_pre_disable; 744 intel_encoder->post_disable = intel_dsi_post_disable; 745 intel_encoder->get_hw_state = intel_dsi_get_hw_state; 746 intel_encoder->get_config = intel_dsi_get_config; 747 748 intel_connector->get_hw_state = intel_connector_get_hw_state; 749 intel_connector->unregister = intel_connector_unregister; 750 751 for (i = 0; i < ARRAY_SIZE(intel_dsi_devices); i++) { 752 dsi = &intel_dsi_devices[i]; 753 intel_dsi->dev = *dsi; 754 755 if (dsi->dev_ops->init(&intel_dsi->dev)) 756 break; 757 } 758 759 if (i == ARRAY_SIZE(intel_dsi_devices)) { 760 DRM_DEBUG_KMS("no device found\n"); 761 goto err; 762 } 763 764 intel_encoder->type = INTEL_OUTPUT_DSI; 765 intel_encoder->crtc_mask = (1 << 0); /* XXX */ 766 767 intel_encoder->cloneable = 0; 768 drm_connector_init(dev, connector, &intel_dsi_connector_funcs, 769 DRM_MODE_CONNECTOR_DSI); 770 771 drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs); 772 773 connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/ 774 connector->interlace_allowed = false; 775 connector->doublescan_allowed = false; 776 777 intel_connector_attach_encoder(intel_connector, intel_encoder); 778 779 drm_connector_register(connector); 780 781 fixed_mode = dsi->dev_ops->get_modes(&intel_dsi->dev); 782 if (!fixed_mode) { 783 DRM_DEBUG_KMS("no fixed mode\n"); 784 goto err; 785 } 786 787 fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; 788 intel_panel_init(&intel_connector->panel, fixed_mode, NULL); 789 790 return; 791 792err: 793 drm_encoder_cleanup(&intel_encoder->base); 794 kfree(intel_dsi); 795 kfree(intel_connector); 796} 797