1/* 2 * (C) Copyright 2009-2010 3 * Nokia Siemens Networks, michael.lawnick.ext@nsn.com 4 * 5 * Portions Copyright (C) 2010, 2011 Cavium Networks, Inc. 6 * 7 * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors. 8 * 9 * This file is licensed under the terms of the GNU General Public 10 * License version 2. This program is licensed "as is" without any 11 * warranty of any kind, whether express or implied. 12 */ 13 14#include <linux/platform_device.h> 15#include <linux/interrupt.h> 16#include <linux/kernel.h> 17#include <linux/module.h> 18#include <linux/delay.h> 19#include <linux/sched.h> 20#include <linux/slab.h> 21#include <linux/i2c.h> 22#include <linux/io.h> 23#include <linux/of.h> 24 25#include <asm/octeon/octeon.h> 26 27#define DRV_NAME "i2c-octeon" 28 29/* The previous out-of-tree version was implicitly version 1.0. */ 30#define DRV_VERSION "2.0" 31 32/* register offsets */ 33#define SW_TWSI 0x00 34#define TWSI_INT 0x10 35 36/* Controller command patterns */ 37#define SW_TWSI_V 0x8000000000000000ull 38#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull 39#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull 40#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull 41#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull 42#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull 43#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull 44#define SW_TWSI_R 0x0100000000000000ull 45 46/* Controller command and status bits */ 47#define TWSI_CTL_CE 0x80 48#define TWSI_CTL_ENAB 0x40 49#define TWSI_CTL_STA 0x20 50#define TWSI_CTL_STP 0x10 51#define TWSI_CTL_IFLG 0x08 52#define TWSI_CTL_AAK 0x04 53 54/* Some status values */ 55#define STAT_START 0x08 56#define STAT_RSTART 0x10 57#define STAT_TXADDR_ACK 0x18 58#define STAT_TXDATA_ACK 0x28 59#define STAT_RXADDR_ACK 0x40 60#define STAT_RXDATA_ACK 0x50 61#define STAT_IDLE 0xF8 62 63struct octeon_i2c { 64 wait_queue_head_t queue; 65 struct i2c_adapter adap; 66 int irq; 67 u32 twsi_freq; 68 int sys_freq; 69 resource_size_t twsi_phys; 70 void __iomem *twsi_base; 71 resource_size_t regsize; 72 struct device *dev; 73}; 74 75/** 76 * octeon_i2c_write_sw - write an I2C core register. 77 * @i2c: The struct octeon_i2c. 78 * @eop_reg: Register selector. 79 * @data: Value to be written. 80 * 81 * The I2C core registers are accessed indirectly via the SW_TWSI CSR. 82 */ 83static void octeon_i2c_write_sw(struct octeon_i2c *i2c, 84 u64 eop_reg, 85 u8 data) 86{ 87 u64 tmp; 88 89 __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI); 90 do { 91 tmp = __raw_readq(i2c->twsi_base + SW_TWSI); 92 } while ((tmp & SW_TWSI_V) != 0); 93} 94 95/** 96 * octeon_i2c_read_sw - write an I2C core register. 97 * @i2c: The struct octeon_i2c. 98 * @eop_reg: Register selector. 99 * 100 * Returns the data. 101 * 102 * The I2C core registers are accessed indirectly via the SW_TWSI CSR. 103 */ 104static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) 105{ 106 u64 tmp; 107 108 __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI); 109 do { 110 tmp = __raw_readq(i2c->twsi_base + SW_TWSI); 111 } while ((tmp & SW_TWSI_V) != 0); 112 113 return tmp & 0xFF; 114} 115 116/** 117 * octeon_i2c_write_int - write the TWSI_INT register 118 * @i2c: The struct octeon_i2c. 119 * @data: Value to be written. 120 */ 121static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) 122{ 123 __raw_writeq(data, i2c->twsi_base + TWSI_INT); 124 __raw_readq(i2c->twsi_base + TWSI_INT); 125} 126 127/** 128 * octeon_i2c_int_enable - enable the TS interrupt. 129 * @i2c: The struct octeon_i2c. 130 * 131 * The interrupt will be asserted when there is non-STAT_IDLE state in 132 * the SW_TWSI_EOP_TWSI_STAT register. 133 */ 134static void octeon_i2c_int_enable(struct octeon_i2c *i2c) 135{ 136 octeon_i2c_write_int(i2c, 0x40); 137} 138 139/** 140 * octeon_i2c_int_disable - disable the TS interrupt. 141 * @i2c: The struct octeon_i2c. 142 */ 143static void octeon_i2c_int_disable(struct octeon_i2c *i2c) 144{ 145 octeon_i2c_write_int(i2c, 0); 146} 147 148/** 149 * octeon_i2c_unblock - unblock the bus. 150 * @i2c: The struct octeon_i2c. 151 * 152 * If there was a reset while a device was driving 0 to bus, 153 * bus is blocked. We toggle it free manually by some clock 154 * cycles and send a stop. 155 */ 156static void octeon_i2c_unblock(struct octeon_i2c *i2c) 157{ 158 int i; 159 160 dev_dbg(i2c->dev, "%s\n", __func__); 161 for (i = 0; i < 9; i++) { 162 octeon_i2c_write_int(i2c, 0x0); 163 udelay(5); 164 octeon_i2c_write_int(i2c, 0x200); 165 udelay(5); 166 } 167 octeon_i2c_write_int(i2c, 0x300); 168 udelay(5); 169 octeon_i2c_write_int(i2c, 0x100); 170 udelay(5); 171 octeon_i2c_write_int(i2c, 0x0); 172} 173 174/** 175 * octeon_i2c_isr - the interrupt service routine. 176 * @int: The irq, unused. 177 * @dev_id: Our struct octeon_i2c. 178 */ 179static irqreturn_t octeon_i2c_isr(int irq, void *dev_id) 180{ 181 struct octeon_i2c *i2c = dev_id; 182 183 octeon_i2c_int_disable(i2c); 184 wake_up(&i2c->queue); 185 186 return IRQ_HANDLED; 187} 188 189 190static int octeon_i2c_test_iflg(struct octeon_i2c *i2c) 191{ 192 return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0; 193} 194 195/** 196 * octeon_i2c_wait - wait for the IFLG to be set. 197 * @i2c: The struct octeon_i2c. 198 * 199 * Returns 0 on success, otherwise a negative errno. 200 */ 201static int octeon_i2c_wait(struct octeon_i2c *i2c) 202{ 203 int result; 204 205 octeon_i2c_int_enable(i2c); 206 207 result = wait_event_timeout(i2c->queue, 208 octeon_i2c_test_iflg(i2c), 209 i2c->adap.timeout); 210 211 octeon_i2c_int_disable(i2c); 212 213 if (result < 0) { 214 dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__); 215 return result; 216 } else if (result == 0) { 217 dev_dbg(i2c->dev, "%s: timeout\n", __func__); 218 return -ETIMEDOUT; 219 } 220 221 return 0; 222} 223 224/** 225 * octeon_i2c_start - send START to the bus. 226 * @i2c: The struct octeon_i2c. 227 * 228 * Returns 0 on success, otherwise a negative errno. 229 */ 230static int octeon_i2c_start(struct octeon_i2c *i2c) 231{ 232 u8 data; 233 int result; 234 235 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, 236 TWSI_CTL_ENAB | TWSI_CTL_STA); 237 238 result = octeon_i2c_wait(i2c); 239 if (result) { 240 if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) { 241 /* 242 * Controller refused to send start flag May 243 * be a client is holding SDA low - let's try 244 * to free it. 245 */ 246 octeon_i2c_unblock(i2c); 247 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, 248 TWSI_CTL_ENAB | TWSI_CTL_STA); 249 250 result = octeon_i2c_wait(i2c); 251 } 252 if (result) 253 return result; 254 } 255 256 data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); 257 if ((data != STAT_START) && (data != STAT_RSTART)) { 258 dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data); 259 return -EIO; 260 } 261 262 return 0; 263} 264 265/** 266 * octeon_i2c_stop - send STOP to the bus. 267 * @i2c: The struct octeon_i2c. 268 * 269 * Returns 0 on success, otherwise a negative errno. 270 */ 271static int octeon_i2c_stop(struct octeon_i2c *i2c) 272{ 273 u8 data; 274 275 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, 276 TWSI_CTL_ENAB | TWSI_CTL_STP); 277 278 data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); 279 280 if (data != STAT_IDLE) { 281 dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data); 282 return -EIO; 283 } 284 return 0; 285} 286 287/** 288 * octeon_i2c_write - send data to the bus. 289 * @i2c: The struct octeon_i2c. 290 * @target: Target address. 291 * @data: Pointer to the data to be sent. 292 * @length: Length of the data. 293 * 294 * The address is sent over the bus, then the data. 295 * 296 * Returns 0 on success, otherwise a negative errno. 297 */ 298static int octeon_i2c_write(struct octeon_i2c *i2c, int target, 299 const u8 *data, int length) 300{ 301 int i, result; 302 u8 tmp; 303 304 result = octeon_i2c_start(i2c); 305 if (result) 306 return result; 307 308 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1); 309 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); 310 311 result = octeon_i2c_wait(i2c); 312 if (result) 313 return result; 314 315 for (i = 0; i < length; i++) { 316 tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); 317 if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) { 318 dev_err(i2c->dev, 319 "%s: bad status before write (0x%x)\n", 320 __func__, tmp); 321 return -EIO; 322 } 323 324 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]); 325 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); 326 327 result = octeon_i2c_wait(i2c); 328 if (result) 329 return result; 330 } 331 332 return 0; 333} 334 335/** 336 * octeon_i2c_read - receive data from the bus. 337 * @i2c: The struct octeon_i2c. 338 * @target: Target address. 339 * @data: Pointer to the location to store the datae . 340 * @length: Length of the data. 341 * 342 * The address is sent over the bus, then the data is read. 343 * 344 * Returns 0 on success, otherwise a negative errno. 345 */ 346static int octeon_i2c_read(struct octeon_i2c *i2c, int target, 347 u8 *data, int length) 348{ 349 int i, result; 350 u8 tmp; 351 352 if (length < 1) 353 return -EINVAL; 354 355 result = octeon_i2c_start(i2c); 356 if (result) 357 return result; 358 359 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1); 360 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); 361 362 result = octeon_i2c_wait(i2c); 363 if (result) 364 return result; 365 366 for (i = 0; i < length; i++) { 367 tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); 368 if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) { 369 dev_err(i2c->dev, 370 "%s: bad status before read (0x%x)\n", 371 __func__, tmp); 372 return -EIO; 373 } 374 375 if (i+1 < length) 376 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, 377 TWSI_CTL_ENAB | TWSI_CTL_AAK); 378 else 379 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, 380 TWSI_CTL_ENAB); 381 382 result = octeon_i2c_wait(i2c); 383 if (result) 384 return result; 385 386 data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA); 387 } 388 return 0; 389} 390 391/** 392 * octeon_i2c_xfer - The driver's master_xfer function. 393 * @adap: Pointer to the i2c_adapter structure. 394 * @msgs: Pointer to the messages to be processed. 395 * @num: Length of the MSGS array. 396 * 397 * Returns the number of messages processed, or a negative errno on 398 * failure. 399 */ 400static int octeon_i2c_xfer(struct i2c_adapter *adap, 401 struct i2c_msg *msgs, 402 int num) 403{ 404 struct i2c_msg *pmsg; 405 int i; 406 int ret = 0; 407 struct octeon_i2c *i2c = i2c_get_adapdata(adap); 408 409 for (i = 0; ret == 0 && i < num; i++) { 410 pmsg = &msgs[i]; 411 dev_dbg(i2c->dev, 412 "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n", 413 pmsg->flags & I2C_M_RD ? "read" : "write", 414 pmsg->len, pmsg->addr, i + 1, num); 415 if (pmsg->flags & I2C_M_RD) 416 ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf, 417 pmsg->len); 418 else 419 ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf, 420 pmsg->len); 421 } 422 octeon_i2c_stop(i2c); 423 424 return (ret != 0) ? ret : num; 425} 426 427static u32 octeon_i2c_functionality(struct i2c_adapter *adap) 428{ 429 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 430} 431 432static const struct i2c_algorithm octeon_i2c_algo = { 433 .master_xfer = octeon_i2c_xfer, 434 .functionality = octeon_i2c_functionality, 435}; 436 437static struct i2c_adapter octeon_i2c_ops = { 438 .owner = THIS_MODULE, 439 .name = "OCTEON adapter", 440 .algo = &octeon_i2c_algo, 441 .timeout = HZ / 50, 442}; 443 444/** 445 * octeon_i2c_setclock - Calculate and set clock divisors. 446 */ 447static int octeon_i2c_setclock(struct octeon_i2c *i2c) 448{ 449 int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; 450 int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; 451 452 for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { 453 /* 454 * An mdiv value of less than 2 seems to not work well 455 * with ds1337 RTCs, so we constrain it to larger 456 * values. 457 */ 458 for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) { 459 /* 460 * For given ndiv and mdiv values check the 461 * two closest thp values. 462 */ 463 tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; 464 tclk *= (1 << ndiv_idx); 465 thp_base = (i2c->sys_freq / (tclk * 2)) - 1; 466 for (inc = 0; inc <= 1; inc++) { 467 thp_idx = thp_base + inc; 468 if (thp_idx < 5 || thp_idx > 0xff) 469 continue; 470 471 foscl = i2c->sys_freq / (2 * (thp_idx + 1)); 472 foscl = foscl / (1 << ndiv_idx); 473 foscl = foscl / (mdiv_idx + 1) / 10; 474 diff = abs(foscl - i2c->twsi_freq); 475 if (diff < delta_hz) { 476 delta_hz = diff; 477 thp = thp_idx; 478 mdiv = mdiv_idx; 479 ndiv = ndiv_idx; 480 } 481 } 482 } 483 } 484 octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp); 485 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv); 486 487 return 0; 488} 489 490static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c) 491{ 492 u8 status; 493 int tries; 494 495 /* disable high level controller, enable bus access */ 496 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); 497 498 /* reset controller */ 499 octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0); 500 501 for (tries = 10; tries; tries--) { 502 udelay(1); 503 status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); 504 if (status == STAT_IDLE) 505 return 0; 506 } 507 dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status); 508 return -EIO; 509} 510 511static int octeon_i2c_probe(struct platform_device *pdev) 512{ 513 int irq, result = 0; 514 struct octeon_i2c *i2c; 515 struct resource *res_mem; 516 517 /* All adaptors have an irq. */ 518 irq = platform_get_irq(pdev, 0); 519 if (irq < 0) 520 return irq; 521 522 i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); 523 if (!i2c) { 524 dev_err(&pdev->dev, "kzalloc failed\n"); 525 result = -ENOMEM; 526 goto out; 527 } 528 i2c->dev = &pdev->dev; 529 530 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 531 532 if (res_mem == NULL) { 533 dev_err(i2c->dev, "found no memory resource\n"); 534 result = -ENXIO; 535 goto out; 536 } 537 i2c->twsi_phys = res_mem->start; 538 i2c->regsize = resource_size(res_mem); 539 540 /* 541 * "clock-rate" is a legacy binding, the official binding is 542 * "clock-frequency". Try the official one first and then 543 * fall back if it doesn't exist. 544 */ 545 if (of_property_read_u32(pdev->dev.of_node, 546 "clock-frequency", &i2c->twsi_freq) && 547 of_property_read_u32(pdev->dev.of_node, 548 "clock-rate", &i2c->twsi_freq)) { 549 dev_err(i2c->dev, 550 "no I2C 'clock-rate' or 'clock-frequency' property\n"); 551 result = -ENXIO; 552 goto out; 553 } 554 555 i2c->sys_freq = octeon_get_io_clock_rate(); 556 557 if (!devm_request_mem_region(&pdev->dev, i2c->twsi_phys, i2c->regsize, 558 res_mem->name)) { 559 dev_err(i2c->dev, "request_mem_region failed\n"); 560 goto out; 561 } 562 i2c->twsi_base = devm_ioremap(&pdev->dev, i2c->twsi_phys, i2c->regsize); 563 564 init_waitqueue_head(&i2c->queue); 565 566 i2c->irq = irq; 567 568 result = devm_request_irq(&pdev->dev, i2c->irq, 569 octeon_i2c_isr, 0, DRV_NAME, i2c); 570 if (result < 0) { 571 dev_err(i2c->dev, "failed to attach interrupt\n"); 572 goto out; 573 } 574 575 result = octeon_i2c_initlowlevel(i2c); 576 if (result) { 577 dev_err(i2c->dev, "init low level failed\n"); 578 goto out; 579 } 580 581 result = octeon_i2c_setclock(i2c); 582 if (result) { 583 dev_err(i2c->dev, "clock init failed\n"); 584 goto out; 585 } 586 587 i2c->adap = octeon_i2c_ops; 588 i2c->adap.dev.parent = &pdev->dev; 589 i2c->adap.dev.of_node = pdev->dev.of_node; 590 i2c_set_adapdata(&i2c->adap, i2c); 591 platform_set_drvdata(pdev, i2c); 592 593 result = i2c_add_adapter(&i2c->adap); 594 if (result < 0) { 595 dev_err(i2c->dev, "failed to add adapter\n"); 596 goto out; 597 } 598 dev_info(i2c->dev, "version %s\n", DRV_VERSION); 599 600 return 0; 601 602out: 603 return result; 604}; 605 606static int octeon_i2c_remove(struct platform_device *pdev) 607{ 608 struct octeon_i2c *i2c = platform_get_drvdata(pdev); 609 610 i2c_del_adapter(&i2c->adap); 611 return 0; 612}; 613 614static struct of_device_id octeon_i2c_match[] = { 615 { 616 .compatible = "cavium,octeon-3860-twsi", 617 }, 618 {}, 619}; 620MODULE_DEVICE_TABLE(of, octeon_i2c_match); 621 622static struct platform_driver octeon_i2c_driver = { 623 .probe = octeon_i2c_probe, 624 .remove = octeon_i2c_remove, 625 .driver = { 626 .owner = THIS_MODULE, 627 .name = DRV_NAME, 628 .of_match_table = octeon_i2c_match, 629 }, 630}; 631 632module_platform_driver(octeon_i2c_driver); 633 634MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>"); 635MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors"); 636MODULE_LICENSE("GPL"); 637MODULE_VERSION(DRV_VERSION); 638