1/*
2 *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
3 *
4 *  Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
5 *
6 *  This program is free software; you can redistribute it and/or modify
7 *  it under the terms of the GNU General Public License as published by
8 *  the Free Software Foundation; either version 2 of the License, or
9 *  (at your option) any later version.
10 *
11 *  This program is distributed in the hope that it will be useful,
12 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 *  GNU General Public License for more details.
15 *
16 *  You should have received a copy of the GNU General Public License
17 *  along with this program; if not, write to the Free Software
18 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20
21#include "mxl111sf-phy.h"
22#include "mxl111sf-reg.h"
23
24int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
25{
26	struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
27		{0x07, 0xff, 0x0c},
28		{0x58, 0xff, 0x9d},
29		{0x09, 0xff, 0x00},
30		{0x06, 0xff, 0x06},
31		{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
32		{0x8d, 0x01, 0x01}, /* NEGATE_Q */
33		{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
34		{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
35		{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
36		{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
37		{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
38		{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
39		{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
40		{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
41		{0x00, 0xff, 0x01}, /* Change to page 1 */
42		{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
43		{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
44		{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
45		{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
46		{0x00, 0xff, 0x00}, /* Change to page 0 */
47		{0,    0,    0}
48	};
49
50	mxl_debug("()");
51
52	return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
53}
54
55int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
56{
57	int ret;
58	mxl_debug("()");
59
60	ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
61	if (mxl_fail(ret))
62		goto fail;
63	ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
64	mxl_fail(ret);
65fail:
66	return ret;
67}
68
69int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
70{
71	int ret;
72
73	mxl_debug("(%s)", MXL_SOC_MODE == mode ?
74		"MXL_SOC_MODE" : "MXL_TUNER_MODE");
75
76	/* set device mode */
77	ret = mxl111sf_write_reg(state, 0x03,
78				 MXL_SOC_MODE == mode ? 0x01 : 0x00);
79	if (mxl_fail(ret))
80		goto fail;
81
82	ret = mxl111sf_write_reg_mask(state,
83				      0x7d, 0x40, MXL_SOC_MODE == mode ?
84				      0x00 : /* enable impulse noise filter,
85						INF_BYP = 0 */
86				      0x40); /* disable impulse noise filter,
87						INF_BYP = 1 */
88	if (mxl_fail(ret))
89		goto fail;
90
91	state->device_mode = mode;
92fail:
93	return ret;
94}
95
96/* power up tuner */
97int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
98{
99	mxl_debug("(%d)", onoff);
100
101	return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
102}
103
104int mxl111sf_disable_656_port(struct mxl111sf_state *state)
105{
106	mxl_debug("()");
107
108	return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
109}
110
111int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
112{
113	mxl_debug("()");
114
115	return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
116}
117
118/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
119int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
120			    unsigned int parallel_serial,
121			    unsigned int msb_lsb_1st,
122			    unsigned int clock_phase,
123			    unsigned int mpeg_valid_pol,
124			    unsigned int mpeg_sync_pol)
125{
126	int ret;
127	u8 mode, tmp;
128
129	mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
130		  clock_phase, mpeg_valid_pol, mpeg_sync_pol);
131
132	/* Enable PIN MUX */
133	ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
134	mxl_fail(ret);
135
136	/* Configure MPEG Clock phase */
137	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
138
139	if (clock_phase == TSIF_NORMAL)
140		mode &= ~V6_INVERTED_CLK_PHASE;
141	else
142		mode |= V6_INVERTED_CLK_PHASE;
143
144	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
145	mxl_fail(ret);
146
147	/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
148	 * Get current configuration */
149	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
150	mxl_fail(ret);
151
152	/* Data Input mode */
153	if (parallel_serial == TSIF_INPUT_PARALLEL) {
154		/* Disable serial mode */
155		mode &= ~V6_MPEG_IN_DATA_SERIAL;
156
157		/* Enable Parallel mode */
158		mode |= V6_MPEG_IN_DATA_PARALLEL;
159	} else {
160		/* Disable Parallel mode */
161		mode &= ~V6_MPEG_IN_DATA_PARALLEL;
162
163		/* Enable Serial Mode */
164		mode |= V6_MPEG_IN_DATA_SERIAL;
165
166		/* If serial interface is chosen, configure
167		   MSB or LSB order in transmission */
168		ret = mxl111sf_read_reg(state,
169					V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
170					&tmp);
171		mxl_fail(ret);
172
173		if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
174			tmp |= V6_MPEG_SER_MSB_FIRST;
175		else
176			tmp &= ~V6_MPEG_SER_MSB_FIRST;
177
178		ret = mxl111sf_write_reg(state,
179					 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
180					 tmp);
181		mxl_fail(ret);
182	}
183
184	/* MPEG Sync polarity */
185	if (mpeg_sync_pol == TSIF_NORMAL)
186		mode &= ~V6_INVERTED_MPEG_SYNC;
187	else
188		mode |= V6_INVERTED_MPEG_SYNC;
189
190	/* MPEG Valid polarity */
191	if (mpeg_valid_pol == 0)
192		mode &= ~V6_INVERTED_MPEG_VALID;
193	else
194		mode |= V6_INVERTED_MPEG_VALID;
195
196	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
197	mxl_fail(ret);
198
199	return ret;
200}
201
202int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
203{
204	static struct mxl111sf_reg_ctrl_info init_i2s[] = {
205		{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
206		{0x15, 0x60, 0x60}, /* Enable I2S */
207		{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
208				       Inverted 656 Clock, I2S_SOFT_RESET,
209				       0 : Normal operation, 1 : Reset State */
210#if 0
211		{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
212#endif
213		{0x00, 0xff, 0x02}, /* Change to Control Page */
214		{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
215		{0x00, 0xff, 0x00},
216		{0,    0,    0}
217	};
218	int ret;
219
220	mxl_debug("(0x%02x)", sample_size);
221
222	ret = mxl111sf_ctrl_program_regs(state, init_i2s);
223	if (mxl_fail(ret))
224		goto fail;
225
226	ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
227	mxl_fail(ret);
228fail:
229	return ret;
230}
231
232int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
233{
234	static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
235		{0x15, 0x40, 0x00},
236		{0,    0,    0}
237	};
238
239	mxl_debug("()");
240
241	return mxl111sf_ctrl_program_regs(state, disable_i2s);
242}
243
244int mxl111sf_config_i2s(struct mxl111sf_state *state,
245			u8 msb_start_pos, u8 data_width)
246{
247	int ret;
248	u8 tmp;
249
250	mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
251
252	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
253	if (mxl_fail(ret))
254		goto fail;
255
256	tmp &= 0xe0;
257	tmp |= msb_start_pos;
258	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
259	if (mxl_fail(ret))
260		goto fail;
261
262	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
263	if (mxl_fail(ret))
264		goto fail;
265
266	tmp &= 0xe0;
267	tmp |= data_width;
268	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
269	mxl_fail(ret);
270fail:
271	return ret;
272}
273
274int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
275{
276	u8 val;
277	int ret;
278
279	mxl_debug("(%d)", onoff);
280
281	ret = mxl111sf_write_reg(state, 0x00, 0x02);
282	if (mxl_fail(ret))
283		goto fail;
284
285	ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
286	if (mxl_fail(ret))
287		goto fail;
288
289	if (onoff)
290		val |= 0x04;
291	else
292		val &= ~0x04;
293
294	ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
295	if (mxl_fail(ret))
296		goto fail;
297
298	ret = mxl111sf_write_reg(state, 0x00, 0x00);
299	mxl_fail(ret);
300fail:
301	return ret;
302}
303
304int mxl111sf_idac_config(struct mxl111sf_state *state,
305			 u8 control_mode, u8 current_setting,
306			 u8 current_value, u8 hysteresis_value)
307{
308	int ret;
309	u8 val;
310	/* current value will be set for both automatic & manual IDAC control */
311	val = current_value;
312
313	if (control_mode == IDAC_MANUAL_CONTROL) {
314		/* enable manual control of IDAC */
315		val |= IDAC_MANUAL_CONTROL_BIT_MASK;
316
317		if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
318			/* enable current sinking in manual mode */
319			val |= IDAC_CURRENT_SINKING_BIT_MASK;
320		else
321			/* disable current sinking in manual mode */
322			val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
323	} else {
324		/* disable manual control of IDAC */
325		val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
326
327		/* set hysteresis value  reg: 0x0B<5:0> */
328		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
329					 (hysteresis_value & 0x3F));
330		mxl_fail(ret);
331	}
332
333	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
334	mxl_fail(ret);
335
336	return ret;
337}
338
339/*
340 * Local variables:
341 * c-basic-offset: 8
342 * End:
343 */
344