1/*
2 *  Nano River Technologies viperboard driver
3 *
4 *  This is the core driver for the viperboard. There are cell drivers
5 *  available for I2C, ADC and both GPIOs. SPI is not yet supported.
6 *  The drivers do not support all features the board exposes. See user
7 *  manual of the viperboard.
8 *
9 *  (C) 2012 by Lemonage GmbH
10 *  Author: Lars Poeschel <poeschel@lemonage.de>
11 *  All rights reserved.
12 *
13 *  This program is free software; you can redistribute  it and/or modify it
14 *  under  the terms of  the GNU General  Public License as published by the
15 *  Free Software Foundation;  either version 2 of the  License, or (at your
16 *  option) any later version.
17 *
18 */
19
20#include <linux/kernel.h>
21#include <linux/errno.h>
22#include <linux/module.h>
23#include <linux/slab.h>
24#include <linux/types.h>
25#include <linux/mutex.h>
26
27#include <linux/mfd/core.h>
28#include <linux/mfd/viperboard.h>
29
30#include <linux/usb.h>
31
32
33static const struct usb_device_id vprbrd_table[] = {
34	{ USB_DEVICE(0x2058, 0x1005) },   /* Nano River Technologies */
35	{ }                               /* Terminating entry */
36};
37
38MODULE_DEVICE_TABLE(usb, vprbrd_table);
39
40static const struct mfd_cell vprbrd_devs[] = {
41	{
42		.name = "viperboard-gpio",
43	},
44	{
45		.name = "viperboard-i2c",
46	},
47	{
48		.name = "viperboard-adc",
49	},
50};
51
52static int vprbrd_probe(struct usb_interface *interface,
53			      const struct usb_device_id *id)
54{
55	struct vprbrd *vb;
56
57	u16 version = 0;
58	int pipe, ret;
59
60	/* allocate memory for our device state and initialize it */
61	vb = kzalloc(sizeof(*vb), GFP_KERNEL);
62	if (vb == NULL) {
63		dev_err(&interface->dev, "Out of memory\n");
64		return -ENOMEM;
65	}
66
67	mutex_init(&vb->lock);
68
69	vb->usb_dev = usb_get_dev(interface_to_usbdev(interface));
70
71	/* save our data pointer in this interface device */
72	usb_set_intfdata(interface, vb);
73	dev_set_drvdata(&vb->pdev.dev, vb);
74
75	/* get version information, major first, minor then */
76	pipe = usb_rcvctrlpipe(vb->usb_dev, 0);
77	ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MAJOR,
78		VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1,
79		VPRBRD_USB_TIMEOUT_MS);
80	if (ret == 1)
81		version = vb->buf[0];
82
83	ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MINOR,
84		VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1,
85		VPRBRD_USB_TIMEOUT_MS);
86	if (ret == 1) {
87		version <<= 8;
88		version = version | vb->buf[0];
89	}
90
91	dev_info(&interface->dev,
92		 "version %x.%02x found at bus %03d address %03d\n",
93		 version >> 8, version & 0xff,
94		 vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
95
96	ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO,
97				vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0,
98				NULL);
99	if (ret != 0) {
100		dev_err(&interface->dev, "Failed to add mfd devices to core.");
101		goto error;
102	}
103
104	return 0;
105
106error:
107	if (vb) {
108		usb_put_dev(vb->usb_dev);
109		kfree(vb);
110	}
111
112	return ret;
113}
114
115static void vprbrd_disconnect(struct usb_interface *interface)
116{
117	struct vprbrd *vb = usb_get_intfdata(interface);
118
119	mfd_remove_devices(&interface->dev);
120	usb_set_intfdata(interface, NULL);
121	usb_put_dev(vb->usb_dev);
122	kfree(vb);
123
124	dev_dbg(&interface->dev, "disconnected\n");
125}
126
127static struct usb_driver vprbrd_driver = {
128	.name		= "viperboard",
129	.probe		= vprbrd_probe,
130	.disconnect	= vprbrd_disconnect,
131	.id_table	= vprbrd_table,
132};
133
134module_usb_driver(vprbrd_driver);
135
136MODULE_DESCRIPTION("Nano River Technologies viperboard mfd core driver");
137MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
138MODULE_LICENSE("GPL");
139