bnx2x_main.c revision f2fd5c3458ffcf4f9b4fbfa64980dffe1850f7de
1/* bnx2x_main.c: Broadcom Everest network driver.
2 *
3 * Copyright (c) 2007-2011 Broadcom Corporation
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation.
8 *
9 * Maintained by: Eilon Greenstein <eilong@broadcom.com>
10 * Written by: Eliezer Tamir
11 * Based on code from Michael Chan's bnx2 driver
12 * UDP CSUM errata workaround by Arik Gendelman
13 * Slowpath and fastpath rework by Vladislav Zolotarov
14 * Statistics and Link management by Yitchak Gertner
15 *
16 */
17
18#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19
20#include <linux/module.h>
21#include <linux/moduleparam.h>
22#include <linux/kernel.h>
23#include <linux/device.h>  /* for dev_info() */
24#include <linux/timer.h>
25#include <linux/errno.h>
26#include <linux/ioport.h>
27#include <linux/slab.h>
28#include <linux/interrupt.h>
29#include <linux/pci.h>
30#include <linux/init.h>
31#include <linux/netdevice.h>
32#include <linux/etherdevice.h>
33#include <linux/skbuff.h>
34#include <linux/dma-mapping.h>
35#include <linux/bitops.h>
36#include <linux/irq.h>
37#include <linux/delay.h>
38#include <asm/byteorder.h>
39#include <linux/time.h>
40#include <linux/ethtool.h>
41#include <linux/mii.h>
42#include <linux/if.h>
43#include <linux/if_vlan.h>
44#include <net/ip.h>
45#include <net/ipv6.h>
46#include <net/tcp.h>
47#include <net/checksum.h>
48#include <net/ip6_checksum.h>
49#include <linux/workqueue.h>
50#include <linux/crc32.h>
51#include <linux/crc32c.h>
52#include <linux/prefetch.h>
53#include <linux/zlib.h>
54#include <linux/io.h>
55#include <linux/stringify.h>
56#include <linux/vmalloc.h>
57
58#include "bnx2x.h"
59#include "bnx2x_init.h"
60#include "bnx2x_init_ops.h"
61#include "bnx2x_cmn.h"
62#include "bnx2x_dcb.h"
63#include "bnx2x_sp.h"
64
65#include <linux/firmware.h>
66#include "bnx2x_fw_file_hdr.h"
67/* FW files */
68#define FW_FILE_VERSION					\
69	__stringify(BCM_5710_FW_MAJOR_VERSION) "."	\
70	__stringify(BCM_5710_FW_MINOR_VERSION) "."	\
71	__stringify(BCM_5710_FW_REVISION_VERSION) "."	\
72	__stringify(BCM_5710_FW_ENGINEERING_VERSION)
73#define FW_FILE_NAME_E1		"bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
74#define FW_FILE_NAME_E1H	"bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
75#define FW_FILE_NAME_E2		"bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
76
77/* Time in jiffies before concluding the transmitter is hung */
78#define TX_TIMEOUT		(5*HZ)
79
80static char version[] __devinitdata =
81	"Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
82	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
83
84MODULE_AUTHOR("Eliezer Tamir");
85MODULE_DESCRIPTION("Broadcom NetXtreme II "
86		   "BCM57710/57711/57711E/"
87		   "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
88		   "57840/57840_MF Driver");
89MODULE_LICENSE("GPL");
90MODULE_VERSION(DRV_MODULE_VERSION);
91MODULE_FIRMWARE(FW_FILE_NAME_E1);
92MODULE_FIRMWARE(FW_FILE_NAME_E1H);
93MODULE_FIRMWARE(FW_FILE_NAME_E2);
94
95static int multi_mode = 1;
96module_param(multi_mode, int, 0);
97MODULE_PARM_DESC(multi_mode, " Multi queue mode "
98			     "(0 Disable; 1 Enable (default))");
99
100int num_queues;
101module_param(num_queues, int, 0);
102MODULE_PARM_DESC(num_queues, " Number of queues for multi_mode=1"
103				" (default is as a number of CPUs)");
104
105static int disable_tpa;
106module_param(disable_tpa, int, 0);
107MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
108
109#define INT_MODE_INTx			1
110#define INT_MODE_MSI			2
111static int int_mode;
112module_param(int_mode, int, 0);
113MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
114				"(1 INT#x; 2 MSI)");
115
116static int dropless_fc;
117module_param(dropless_fc, int, 0);
118MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
119
120static int poll;
121module_param(poll, int, 0);
122MODULE_PARM_DESC(poll, " Use polling (for debug)");
123
124static int mrrs = -1;
125module_param(mrrs, int, 0);
126MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
127
128static int debug;
129module_param(debug, int, 0);
130MODULE_PARM_DESC(debug, " Default debug msglevel");
131
132
133
134struct workqueue_struct *bnx2x_wq;
135
136enum bnx2x_board_type {
137	BCM57710 = 0,
138	BCM57711,
139	BCM57711E,
140	BCM57712,
141	BCM57712_MF,
142	BCM57800,
143	BCM57800_MF,
144	BCM57810,
145	BCM57810_MF,
146	BCM57840,
147	BCM57840_MF
148};
149
150/* indexed by board_type, above */
151static struct {
152	char *name;
153} board_info[] __devinitdata = {
154	{ "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
155	{ "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
156	{ "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
157	{ "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
158	{ "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
159	{ "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
160	{ "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
161	{ "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
162	{ "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
163	{ "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
164	{ "Broadcom NetXtreme II BCM57840 10/20 Gigabit "
165						"Ethernet Multi Function"}
166};
167
168#ifndef PCI_DEVICE_ID_NX2_57710
169#define PCI_DEVICE_ID_NX2_57710		CHIP_NUM_57710
170#endif
171#ifndef PCI_DEVICE_ID_NX2_57711
172#define PCI_DEVICE_ID_NX2_57711		CHIP_NUM_57711
173#endif
174#ifndef PCI_DEVICE_ID_NX2_57711E
175#define PCI_DEVICE_ID_NX2_57711E	CHIP_NUM_57711E
176#endif
177#ifndef PCI_DEVICE_ID_NX2_57712
178#define PCI_DEVICE_ID_NX2_57712		CHIP_NUM_57712
179#endif
180#ifndef PCI_DEVICE_ID_NX2_57712_MF
181#define PCI_DEVICE_ID_NX2_57712_MF	CHIP_NUM_57712_MF
182#endif
183#ifndef PCI_DEVICE_ID_NX2_57800
184#define PCI_DEVICE_ID_NX2_57800		CHIP_NUM_57800
185#endif
186#ifndef PCI_DEVICE_ID_NX2_57800_MF
187#define PCI_DEVICE_ID_NX2_57800_MF	CHIP_NUM_57800_MF
188#endif
189#ifndef PCI_DEVICE_ID_NX2_57810
190#define PCI_DEVICE_ID_NX2_57810		CHIP_NUM_57810
191#endif
192#ifndef PCI_DEVICE_ID_NX2_57810_MF
193#define PCI_DEVICE_ID_NX2_57810_MF	CHIP_NUM_57810_MF
194#endif
195#ifndef PCI_DEVICE_ID_NX2_57840
196#define PCI_DEVICE_ID_NX2_57840		CHIP_NUM_57840
197#endif
198#ifndef PCI_DEVICE_ID_NX2_57840_MF
199#define PCI_DEVICE_ID_NX2_57840_MF	CHIP_NUM_57840_MF
200#endif
201static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
202	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
203	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
204	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
205	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 },
206	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF },
207	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 },
208	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF },
209	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 },
210	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF },
211	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840), BCM57840 },
212	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
213	{ 0 }
214};
215
216MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
217
218/****************************************************************************
219* General service functions
220****************************************************************************/
221
222static inline void __storm_memset_dma_mapping(struct bnx2x *bp,
223				       u32 addr, dma_addr_t mapping)
224{
225	REG_WR(bp,  addr, U64_LO(mapping));
226	REG_WR(bp,  addr + 4, U64_HI(mapping));
227}
228
229static inline void storm_memset_spq_addr(struct bnx2x *bp,
230					 dma_addr_t mapping, u16 abs_fid)
231{
232	u32 addr = XSEM_REG_FAST_MEMORY +
233			XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid);
234
235	__storm_memset_dma_mapping(bp, addr, mapping);
236}
237
238static inline void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid,
239					 u16 pf_id)
240{
241	REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid),
242		pf_id);
243	REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid),
244		pf_id);
245	REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid),
246		pf_id);
247	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid),
248		pf_id);
249}
250
251static inline void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid,
252					u8 enable)
253{
254	REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid),
255		enable);
256	REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid),
257		enable);
258	REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid),
259		enable);
260	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid),
261		enable);
262}
263
264static inline void storm_memset_eq_data(struct bnx2x *bp,
265				struct event_ring_data *eq_data,
266				u16 pfid)
267{
268	size_t size = sizeof(struct event_ring_data);
269
270	u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid);
271
272	__storm_memset_struct(bp, addr, size, (u32 *)eq_data);
273}
274
275static inline void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod,
276					u16 pfid)
277{
278	u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid);
279	REG_WR16(bp, addr, eq_prod);
280}
281
282/* used only at init
283 * locking is done by mcp
284 */
285static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
286{
287	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
288	pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
289	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
290			       PCICFG_VENDOR_ID_OFFSET);
291}
292
293static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr)
294{
295	u32 val;
296
297	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
298	pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val);
299	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
300			       PCICFG_VENDOR_ID_OFFSET);
301
302	return val;
303}
304
305#define DMAE_DP_SRC_GRC		"grc src_addr [%08x]"
306#define DMAE_DP_SRC_PCI		"pci src_addr [%x:%08x]"
307#define DMAE_DP_DST_GRC		"grc dst_addr [%08x]"
308#define DMAE_DP_DST_PCI		"pci dst_addr [%x:%08x]"
309#define DMAE_DP_DST_NONE	"dst_addr [none]"
310
311static void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae,
312			  int msglvl)
313{
314	u32 src_type = dmae->opcode & DMAE_COMMAND_SRC;
315
316	switch (dmae->opcode & DMAE_COMMAND_DST) {
317	case DMAE_CMD_DST_PCI:
318		if (src_type == DMAE_CMD_SRC_PCI)
319			DP(msglvl, "DMAE: opcode 0x%08x\n"
320			   "src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
321			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
322			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
323			   dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
324			   dmae->comp_addr_hi, dmae->comp_addr_lo,
325			   dmae->comp_val);
326		else
327			DP(msglvl, "DMAE: opcode 0x%08x\n"
328			   "src [%08x], len [%d*4], dst [%x:%08x]\n"
329			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
330			   dmae->opcode, dmae->src_addr_lo >> 2,
331			   dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
332			   dmae->comp_addr_hi, dmae->comp_addr_lo,
333			   dmae->comp_val);
334		break;
335	case DMAE_CMD_DST_GRC:
336		if (src_type == DMAE_CMD_SRC_PCI)
337			DP(msglvl, "DMAE: opcode 0x%08x\n"
338			   "src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
339			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
340			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
341			   dmae->len, dmae->dst_addr_lo >> 2,
342			   dmae->comp_addr_hi, dmae->comp_addr_lo,
343			   dmae->comp_val);
344		else
345			DP(msglvl, "DMAE: opcode 0x%08x\n"
346			   "src [%08x], len [%d*4], dst [%08x]\n"
347			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
348			   dmae->opcode, dmae->src_addr_lo >> 2,
349			   dmae->len, dmae->dst_addr_lo >> 2,
350			   dmae->comp_addr_hi, dmae->comp_addr_lo,
351			   dmae->comp_val);
352		break;
353	default:
354		if (src_type == DMAE_CMD_SRC_PCI)
355			DP(msglvl, "DMAE: opcode 0x%08x\n"
356			   "src_addr [%x:%08x]  len [%d * 4]  dst_addr [none]\n"
357			   "comp_addr [%x:%08x]  comp_val 0x%08x\n",
358			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
359			   dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
360			   dmae->comp_val);
361		else
362			DP(msglvl, "DMAE: opcode 0x%08x\n"
363			   "src_addr [%08x]  len [%d * 4]  dst_addr [none]\n"
364			   "comp_addr [%x:%08x]  comp_val 0x%08x\n",
365			   dmae->opcode, dmae->src_addr_lo >> 2,
366			   dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
367			   dmae->comp_val);
368		break;
369	}
370
371}
372
373/* copy command into DMAE command memory and set DMAE command go */
374void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx)
375{
376	u32 cmd_offset;
377	int i;
378
379	cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx);
380	for (i = 0; i < (sizeof(struct dmae_command)/4); i++) {
381		REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i));
382
383		DP(BNX2X_MSG_OFF, "DMAE cmd[%d].%d (0x%08x) : 0x%08x\n",
384		   idx, i, cmd_offset + i*4, *(((u32 *)dmae) + i));
385	}
386	REG_WR(bp, dmae_reg_go_c[idx], 1);
387}
388
389u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type)
390{
391	return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
392			   DMAE_CMD_C_ENABLE);
393}
394
395u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode)
396{
397	return opcode & ~DMAE_CMD_SRC_RESET;
398}
399
400u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
401			     bool with_comp, u8 comp_type)
402{
403	u32 opcode = 0;
404
405	opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
406		   (dst_type << DMAE_COMMAND_DST_SHIFT));
407
408	opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
409
410	opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
411	opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
412		   (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
413	opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
414
415#ifdef __BIG_ENDIAN
416	opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
417#else
418	opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
419#endif
420	if (with_comp)
421		opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
422	return opcode;
423}
424
425static void bnx2x_prep_dmae_with_comp(struct bnx2x *bp,
426				      struct dmae_command *dmae,
427				      u8 src_type, u8 dst_type)
428{
429	memset(dmae, 0, sizeof(struct dmae_command));
430
431	/* set the opcode */
432	dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type,
433					 true, DMAE_COMP_PCI);
434
435	/* fill in the completion parameters */
436	dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
437	dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
438	dmae->comp_val = DMAE_COMP_VAL;
439}
440
441/* issue a dmae command over the init-channel and wailt for completion */
442static int bnx2x_issue_dmae_with_comp(struct bnx2x *bp,
443				      struct dmae_command *dmae)
444{
445	u32 *wb_comp = bnx2x_sp(bp, wb_comp);
446	int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000;
447	int rc = 0;
448
449	DP(BNX2X_MSG_OFF, "data before [0x%08x 0x%08x 0x%08x 0x%08x]\n",
450	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
451	   bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
452
453	/*
454	 * Lock the dmae channel. Disable BHs to prevent a dead-lock
455	 * as long as this code is called both from syscall context and
456	 * from ndo_set_rx_mode() flow that may be called from BH.
457	 */
458	spin_lock_bh(&bp->dmae_lock);
459
460	/* reset completion */
461	*wb_comp = 0;
462
463	/* post the command on the channel used for initializations */
464	bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
465
466	/* wait for completion */
467	udelay(5);
468	while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
469		DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
470
471		if (!cnt) {
472			BNX2X_ERR("DMAE timeout!\n");
473			rc = DMAE_TIMEOUT;
474			goto unlock;
475		}
476		cnt--;
477		udelay(50);
478	}
479	if (*wb_comp & DMAE_PCI_ERR_FLAG) {
480		BNX2X_ERR("DMAE PCI error!\n");
481		rc = DMAE_PCI_ERROR;
482	}
483
484	DP(BNX2X_MSG_OFF, "data after [0x%08x 0x%08x 0x%08x 0x%08x]\n",
485	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
486	   bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
487
488unlock:
489	spin_unlock_bh(&bp->dmae_lock);
490	return rc;
491}
492
493void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
494		      u32 len32)
495{
496	struct dmae_command dmae;
497
498	if (!bp->dmae_ready) {
499		u32 *data = bnx2x_sp(bp, wb_data[0]);
500
501		DP(BNX2X_MSG_OFF, "DMAE is not ready (dst_addr %08x  len32 %d)"
502		   "  using indirect\n", dst_addr, len32);
503		bnx2x_init_ind_wr(bp, dst_addr, data, len32);
504		return;
505	}
506
507	/* set opcode and fixed command fields */
508	bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
509
510	/* fill in addresses and len */
511	dmae.src_addr_lo = U64_LO(dma_addr);
512	dmae.src_addr_hi = U64_HI(dma_addr);
513	dmae.dst_addr_lo = dst_addr >> 2;
514	dmae.dst_addr_hi = 0;
515	dmae.len = len32;
516
517	bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_OFF);
518
519	/* issue the command and wait for completion */
520	bnx2x_issue_dmae_with_comp(bp, &dmae);
521}
522
523void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
524{
525	struct dmae_command dmae;
526
527	if (!bp->dmae_ready) {
528		u32 *data = bnx2x_sp(bp, wb_data[0]);
529		int i;
530
531		DP(BNX2X_MSG_OFF, "DMAE is not ready (src_addr %08x  len32 %d)"
532		   "  using indirect\n", src_addr, len32);
533		for (i = 0; i < len32; i++)
534			data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4);
535		return;
536	}
537
538	/* set opcode and fixed command fields */
539	bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
540
541	/* fill in addresses and len */
542	dmae.src_addr_lo = src_addr >> 2;
543	dmae.src_addr_hi = 0;
544	dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
545	dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
546	dmae.len = len32;
547
548	bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_OFF);
549
550	/* issue the command and wait for completion */
551	bnx2x_issue_dmae_with_comp(bp, &dmae);
552}
553
554static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
555				      u32 addr, u32 len)
556{
557	int dmae_wr_max = DMAE_LEN32_WR_MAX(bp);
558	int offset = 0;
559
560	while (len > dmae_wr_max) {
561		bnx2x_write_dmae(bp, phys_addr + offset,
562				 addr + offset, dmae_wr_max);
563		offset += dmae_wr_max * 4;
564		len -= dmae_wr_max;
565	}
566
567	bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
568}
569
570/* used only for slowpath so not inlined */
571static void bnx2x_wb_wr(struct bnx2x *bp, int reg, u32 val_hi, u32 val_lo)
572{
573	u32 wb_write[2];
574
575	wb_write[0] = val_hi;
576	wb_write[1] = val_lo;
577	REG_WR_DMAE(bp, reg, wb_write, 2);
578}
579
580#ifdef USE_WB_RD
581static u64 bnx2x_wb_rd(struct bnx2x *bp, int reg)
582{
583	u32 wb_data[2];
584
585	REG_RD_DMAE(bp, reg, wb_data, 2);
586
587	return HILO_U64(wb_data[0], wb_data[1]);
588}
589#endif
590
591static int bnx2x_mc_assert(struct bnx2x *bp)
592{
593	char last_idx;
594	int i, rc = 0;
595	u32 row0, row1, row2, row3;
596
597	/* XSTORM */
598	last_idx = REG_RD8(bp, BAR_XSTRORM_INTMEM +
599			   XSTORM_ASSERT_LIST_INDEX_OFFSET);
600	if (last_idx)
601		BNX2X_ERR("XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
602
603	/* print the asserts */
604	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
605
606		row0 = REG_RD(bp, BAR_XSTRORM_INTMEM +
607			      XSTORM_ASSERT_LIST_OFFSET(i));
608		row1 = REG_RD(bp, BAR_XSTRORM_INTMEM +
609			      XSTORM_ASSERT_LIST_OFFSET(i) + 4);
610		row2 = REG_RD(bp, BAR_XSTRORM_INTMEM +
611			      XSTORM_ASSERT_LIST_OFFSET(i) + 8);
612		row3 = REG_RD(bp, BAR_XSTRORM_INTMEM +
613			      XSTORM_ASSERT_LIST_OFFSET(i) + 12);
614
615		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
616			BNX2X_ERR("XSTORM_ASSERT_INDEX 0x%x = 0x%08x"
617				  " 0x%08x 0x%08x 0x%08x\n",
618				  i, row3, row2, row1, row0);
619			rc++;
620		} else {
621			break;
622		}
623	}
624
625	/* TSTORM */
626	last_idx = REG_RD8(bp, BAR_TSTRORM_INTMEM +
627			   TSTORM_ASSERT_LIST_INDEX_OFFSET);
628	if (last_idx)
629		BNX2X_ERR("TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
630
631	/* print the asserts */
632	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
633
634		row0 = REG_RD(bp, BAR_TSTRORM_INTMEM +
635			      TSTORM_ASSERT_LIST_OFFSET(i));
636		row1 = REG_RD(bp, BAR_TSTRORM_INTMEM +
637			      TSTORM_ASSERT_LIST_OFFSET(i) + 4);
638		row2 = REG_RD(bp, BAR_TSTRORM_INTMEM +
639			      TSTORM_ASSERT_LIST_OFFSET(i) + 8);
640		row3 = REG_RD(bp, BAR_TSTRORM_INTMEM +
641			      TSTORM_ASSERT_LIST_OFFSET(i) + 12);
642
643		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
644			BNX2X_ERR("TSTORM_ASSERT_INDEX 0x%x = 0x%08x"
645				  " 0x%08x 0x%08x 0x%08x\n",
646				  i, row3, row2, row1, row0);
647			rc++;
648		} else {
649			break;
650		}
651	}
652
653	/* CSTORM */
654	last_idx = REG_RD8(bp, BAR_CSTRORM_INTMEM +
655			   CSTORM_ASSERT_LIST_INDEX_OFFSET);
656	if (last_idx)
657		BNX2X_ERR("CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
658
659	/* print the asserts */
660	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
661
662		row0 = REG_RD(bp, BAR_CSTRORM_INTMEM +
663			      CSTORM_ASSERT_LIST_OFFSET(i));
664		row1 = REG_RD(bp, BAR_CSTRORM_INTMEM +
665			      CSTORM_ASSERT_LIST_OFFSET(i) + 4);
666		row2 = REG_RD(bp, BAR_CSTRORM_INTMEM +
667			      CSTORM_ASSERT_LIST_OFFSET(i) + 8);
668		row3 = REG_RD(bp, BAR_CSTRORM_INTMEM +
669			      CSTORM_ASSERT_LIST_OFFSET(i) + 12);
670
671		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
672			BNX2X_ERR("CSTORM_ASSERT_INDEX 0x%x = 0x%08x"
673				  " 0x%08x 0x%08x 0x%08x\n",
674				  i, row3, row2, row1, row0);
675			rc++;
676		} else {
677			break;
678		}
679	}
680
681	/* USTORM */
682	last_idx = REG_RD8(bp, BAR_USTRORM_INTMEM +
683			   USTORM_ASSERT_LIST_INDEX_OFFSET);
684	if (last_idx)
685		BNX2X_ERR("USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
686
687	/* print the asserts */
688	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
689
690		row0 = REG_RD(bp, BAR_USTRORM_INTMEM +
691			      USTORM_ASSERT_LIST_OFFSET(i));
692		row1 = REG_RD(bp, BAR_USTRORM_INTMEM +
693			      USTORM_ASSERT_LIST_OFFSET(i) + 4);
694		row2 = REG_RD(bp, BAR_USTRORM_INTMEM +
695			      USTORM_ASSERT_LIST_OFFSET(i) + 8);
696		row3 = REG_RD(bp, BAR_USTRORM_INTMEM +
697			      USTORM_ASSERT_LIST_OFFSET(i) + 12);
698
699		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
700			BNX2X_ERR("USTORM_ASSERT_INDEX 0x%x = 0x%08x"
701				  " 0x%08x 0x%08x 0x%08x\n",
702				  i, row3, row2, row1, row0);
703			rc++;
704		} else {
705			break;
706		}
707	}
708
709	return rc;
710}
711
712void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
713{
714	u32 addr, val;
715	u32 mark, offset;
716	__be32 data[9];
717	int word;
718	u32 trace_shmem_base;
719	if (BP_NOMCP(bp)) {
720		BNX2X_ERR("NO MCP - can not dump\n");
721		return;
722	}
723	netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n",
724		(bp->common.bc_ver & 0xff0000) >> 16,
725		(bp->common.bc_ver & 0xff00) >> 8,
726		(bp->common.bc_ver & 0xff));
727
728	val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER);
729	if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER))
730		printk("%s" "MCP PC at 0x%x\n", lvl, val);
731
732	if (BP_PATH(bp) == 0)
733		trace_shmem_base = bp->common.shmem_base;
734	else
735		trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr);
736	addr = trace_shmem_base - 0x0800 + 4;
737	mark = REG_RD(bp, addr);
738	mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
739			+ ((mark + 0x3) & ~0x3) - 0x08000000;
740	printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
741
742	printk("%s", lvl);
743	for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) {
744		for (word = 0; word < 8; word++)
745			data[word] = htonl(REG_RD(bp, offset + 4*word));
746		data[8] = 0x0;
747		pr_cont("%s", (char *)data);
748	}
749	for (offset = addr + 4; offset <= mark; offset += 0x8*4) {
750		for (word = 0; word < 8; word++)
751			data[word] = htonl(REG_RD(bp, offset + 4*word));
752		data[8] = 0x0;
753		pr_cont("%s", (char *)data);
754	}
755	printk("%s" "end of fw dump\n", lvl);
756}
757
758static inline void bnx2x_fw_dump(struct bnx2x *bp)
759{
760	bnx2x_fw_dump_lvl(bp, KERN_ERR);
761}
762
763void bnx2x_panic_dump(struct bnx2x *bp)
764{
765	int i;
766	u16 j;
767	struct hc_sp_status_block_data sp_sb_data;
768	int func = BP_FUNC(bp);
769#ifdef BNX2X_STOP_ON_ERROR
770	u16 start = 0, end = 0;
771	u8 cos;
772#endif
773
774	bp->stats_state = STATS_STATE_DISABLED;
775	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
776
777	BNX2X_ERR("begin crash dump -----------------\n");
778
779	/* Indices */
780	/* Common */
781	BNX2X_ERR("def_idx(0x%x)  def_att_idx(0x%x)  attn_state(0x%x)"
782		  "  spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
783		  bp->def_idx, bp->def_att_idx, bp->attn_state,
784		  bp->spq_prod_idx, bp->stats_counter);
785	BNX2X_ERR("DSB: attn bits(0x%x)  ack(0x%x)  id(0x%x)  idx(0x%x)\n",
786		  bp->def_status_blk->atten_status_block.attn_bits,
787		  bp->def_status_blk->atten_status_block.attn_bits_ack,
788		  bp->def_status_blk->atten_status_block.status_block_id,
789		  bp->def_status_blk->atten_status_block.attn_bits_index);
790	BNX2X_ERR("     def (");
791	for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
792		pr_cont("0x%x%s",
793			bp->def_status_blk->sp_sb.index_values[i],
794			(i == HC_SP_SB_MAX_INDICES - 1) ? ")  " : " ");
795
796	for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
797		*((u32 *)&sp_sb_data + i) = REG_RD(bp, BAR_CSTRORM_INTMEM +
798			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
799			i*sizeof(u32));
800
801	pr_cont("igu_sb_id(0x%x)  igu_seg_id(0x%x) pf_id(0x%x)  vnic_id(0x%x)  vf_id(0x%x)  vf_valid (0x%x) state(0x%x)\n",
802	       sp_sb_data.igu_sb_id,
803	       sp_sb_data.igu_seg_id,
804	       sp_sb_data.p_func.pf_id,
805	       sp_sb_data.p_func.vnic_id,
806	       sp_sb_data.p_func.vf_id,
807	       sp_sb_data.p_func.vf_valid,
808	       sp_sb_data.state);
809
810
811	for_each_eth_queue(bp, i) {
812		struct bnx2x_fastpath *fp = &bp->fp[i];
813		int loop;
814		struct hc_status_block_data_e2 sb_data_e2;
815		struct hc_status_block_data_e1x sb_data_e1x;
816		struct hc_status_block_sm  *hc_sm_p =
817			CHIP_IS_E1x(bp) ?
818			sb_data_e1x.common.state_machine :
819			sb_data_e2.common.state_machine;
820		struct hc_index_data *hc_index_p =
821			CHIP_IS_E1x(bp) ?
822			sb_data_e1x.index_data :
823			sb_data_e2.index_data;
824		u8 data_size, cos;
825		u32 *sb_data_p;
826		struct bnx2x_fp_txdata txdata;
827
828		/* Rx */
829		BNX2X_ERR("fp%d: rx_bd_prod(0x%x)  rx_bd_cons(0x%x)"
830			  "  rx_comp_prod(0x%x)"
831			  "  rx_comp_cons(0x%x)  *rx_cons_sb(0x%x)\n",
832			  i, fp->rx_bd_prod, fp->rx_bd_cons,
833			  fp->rx_comp_prod,
834			  fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
835		BNX2X_ERR("     rx_sge_prod(0x%x)  last_max_sge(0x%x)"
836			  "  fp_hc_idx(0x%x)\n",
837			  fp->rx_sge_prod, fp->last_max_sge,
838			  le16_to_cpu(fp->fp_hc_idx));
839
840		/* Tx */
841		for_each_cos_in_tx_queue(fp, cos)
842		{
843			txdata = fp->txdata[cos];
844			BNX2X_ERR("fp%d: tx_pkt_prod(0x%x)  tx_pkt_cons(0x%x)"
845				  "  tx_bd_prod(0x%x)  tx_bd_cons(0x%x)"
846				  "  *tx_cons_sb(0x%x)\n",
847				  i, txdata.tx_pkt_prod,
848				  txdata.tx_pkt_cons, txdata.tx_bd_prod,
849				  txdata.tx_bd_cons,
850				  le16_to_cpu(*txdata.tx_cons_sb));
851		}
852
853		loop = CHIP_IS_E1x(bp) ?
854			HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2;
855
856		/* host sb data */
857
858#ifdef BCM_CNIC
859		if (IS_FCOE_FP(fp))
860			continue;
861#endif
862		BNX2X_ERR("     run indexes (");
863		for (j = 0; j < HC_SB_MAX_SM; j++)
864			pr_cont("0x%x%s",
865			       fp->sb_running_index[j],
866			       (j == HC_SB_MAX_SM - 1) ? ")" : " ");
867
868		BNX2X_ERR("     indexes (");
869		for (j = 0; j < loop; j++)
870			pr_cont("0x%x%s",
871			       fp->sb_index_values[j],
872			       (j == loop - 1) ? ")" : " ");
873		/* fw sb data */
874		data_size = CHIP_IS_E1x(bp) ?
875			sizeof(struct hc_status_block_data_e1x) :
876			sizeof(struct hc_status_block_data_e2);
877		data_size /= sizeof(u32);
878		sb_data_p = CHIP_IS_E1x(bp) ?
879			(u32 *)&sb_data_e1x :
880			(u32 *)&sb_data_e2;
881		/* copy sb data in here */
882		for (j = 0; j < data_size; j++)
883			*(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM +
884				CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) +
885				j * sizeof(u32));
886
887		if (!CHIP_IS_E1x(bp)) {
888			pr_cont("pf_id(0x%x)  vf_id(0x%x)  vf_valid(0x%x) "
889				"vnic_id(0x%x)  same_igu_sb_1b(0x%x) "
890				"state(0x%x)\n",
891				sb_data_e2.common.p_func.pf_id,
892				sb_data_e2.common.p_func.vf_id,
893				sb_data_e2.common.p_func.vf_valid,
894				sb_data_e2.common.p_func.vnic_id,
895				sb_data_e2.common.same_igu_sb_1b,
896				sb_data_e2.common.state);
897		} else {
898			pr_cont("pf_id(0x%x)  vf_id(0x%x)  vf_valid(0x%x) "
899				"vnic_id(0x%x)  same_igu_sb_1b(0x%x) "
900				"state(0x%x)\n",
901				sb_data_e1x.common.p_func.pf_id,
902				sb_data_e1x.common.p_func.vf_id,
903				sb_data_e1x.common.p_func.vf_valid,
904				sb_data_e1x.common.p_func.vnic_id,
905				sb_data_e1x.common.same_igu_sb_1b,
906				sb_data_e1x.common.state);
907		}
908
909		/* SB_SMs data */
910		for (j = 0; j < HC_SB_MAX_SM; j++) {
911			pr_cont("SM[%d] __flags (0x%x) "
912			       "igu_sb_id (0x%x)  igu_seg_id(0x%x) "
913			       "time_to_expire (0x%x) "
914			       "timer_value(0x%x)\n", j,
915			       hc_sm_p[j].__flags,
916			       hc_sm_p[j].igu_sb_id,
917			       hc_sm_p[j].igu_seg_id,
918			       hc_sm_p[j].time_to_expire,
919			       hc_sm_p[j].timer_value);
920		}
921
922		/* Indecies data */
923		for (j = 0; j < loop; j++) {
924			pr_cont("INDEX[%d] flags (0x%x) "
925					 "timeout (0x%x)\n", j,
926			       hc_index_p[j].flags,
927			       hc_index_p[j].timeout);
928		}
929	}
930
931#ifdef BNX2X_STOP_ON_ERROR
932	/* Rings */
933	/* Rx */
934	for_each_rx_queue(bp, i) {
935		struct bnx2x_fastpath *fp = &bp->fp[i];
936
937		start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
938		end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503);
939		for (j = start; j != end; j = RX_BD(j + 1)) {
940			u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j];
941			struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
942
943			BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x]  sw_bd=[%p]\n",
944				  i, j, rx_bd[1], rx_bd[0], sw_bd->skb);
945		}
946
947		start = RX_SGE(fp->rx_sge_prod);
948		end = RX_SGE(fp->last_max_sge);
949		for (j = start; j != end; j = RX_SGE(j + 1)) {
950			u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
951			struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
952
953			BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x]  sw_page=[%p]\n",
954				  i, j, rx_sge[1], rx_sge[0], sw_page->page);
955		}
956
957		start = RCQ_BD(fp->rx_comp_cons - 10);
958		end = RCQ_BD(fp->rx_comp_cons + 503);
959		for (j = start; j != end; j = RCQ_BD(j + 1)) {
960			u32 *cqe = (u32 *)&fp->rx_comp_ring[j];
961
962			BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
963				  i, j, cqe[0], cqe[1], cqe[2], cqe[3]);
964		}
965	}
966
967	/* Tx */
968	for_each_tx_queue(bp, i) {
969		struct bnx2x_fastpath *fp = &bp->fp[i];
970		for_each_cos_in_tx_queue(fp, cos) {
971			struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
972
973			start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10);
974			end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245);
975			for (j = start; j != end; j = TX_BD(j + 1)) {
976				struct sw_tx_bd *sw_bd =
977					&txdata->tx_buf_ring[j];
978
979				BNX2X_ERR("fp%d: txdata %d, "
980					  "packet[%x]=[%p,%x]\n",
981					  i, cos, j, sw_bd->skb,
982					  sw_bd->first_bd);
983			}
984
985			start = TX_BD(txdata->tx_bd_cons - 10);
986			end = TX_BD(txdata->tx_bd_cons + 254);
987			for (j = start; j != end; j = TX_BD(j + 1)) {
988				u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j];
989
990				BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]="
991					  "[%x:%x:%x:%x]\n",
992					  i, cos, j, tx_bd[0], tx_bd[1],
993					  tx_bd[2], tx_bd[3]);
994			}
995		}
996	}
997#endif
998	bnx2x_fw_dump(bp);
999	bnx2x_mc_assert(bp);
1000	BNX2X_ERR("end crash dump -----------------\n");
1001}
1002
1003/*
1004 * FLR Support for E2
1005 *
1006 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW
1007 * initialization.
1008 */
1009#define FLR_WAIT_USEC		10000	/* 10 miliseconds */
1010#define FLR_WAIT_INTERAVAL	50	/* usec */
1011#define	FLR_POLL_CNT		(FLR_WAIT_USEC/FLR_WAIT_INTERAVAL) /* 200 */
1012
1013struct pbf_pN_buf_regs {
1014	int pN;
1015	u32 init_crd;
1016	u32 crd;
1017	u32 crd_freed;
1018};
1019
1020struct pbf_pN_cmd_regs {
1021	int pN;
1022	u32 lines_occup;
1023	u32 lines_freed;
1024};
1025
1026static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp,
1027				     struct pbf_pN_buf_regs *regs,
1028				     u32 poll_count)
1029{
1030	u32 init_crd, crd, crd_start, crd_freed, crd_freed_start;
1031	u32 cur_cnt = poll_count;
1032
1033	crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed);
1034	crd = crd_start = REG_RD(bp, regs->crd);
1035	init_crd = REG_RD(bp, regs->init_crd);
1036
1037	DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd);
1038	DP(BNX2X_MSG_SP, "CREDIT[%d]      : s:%x\n", regs->pN, crd);
1039	DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed);
1040
1041	while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) <
1042	       (init_crd - crd_start))) {
1043		if (cur_cnt--) {
1044			udelay(FLR_WAIT_INTERAVAL);
1045			crd = REG_RD(bp, regs->crd);
1046			crd_freed = REG_RD(bp, regs->crd_freed);
1047		} else {
1048			DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n",
1049			   regs->pN);
1050			DP(BNX2X_MSG_SP, "CREDIT[%d]      : c:%x\n",
1051			   regs->pN, crd);
1052			DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n",
1053			   regs->pN, crd_freed);
1054			break;
1055		}
1056	}
1057	DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n",
1058	   poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN);
1059}
1060
1061static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp,
1062				     struct pbf_pN_cmd_regs *regs,
1063				     u32 poll_count)
1064{
1065	u32 occup, to_free, freed, freed_start;
1066	u32 cur_cnt = poll_count;
1067
1068	occup = to_free = REG_RD(bp, regs->lines_occup);
1069	freed = freed_start = REG_RD(bp, regs->lines_freed);
1070
1071	DP(BNX2X_MSG_SP, "OCCUPANCY[%d]   : s:%x\n", regs->pN, occup);
1072	DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed);
1073
1074	while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) {
1075		if (cur_cnt--) {
1076			udelay(FLR_WAIT_INTERAVAL);
1077			occup = REG_RD(bp, regs->lines_occup);
1078			freed = REG_RD(bp, regs->lines_freed);
1079		} else {
1080			DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n",
1081			   regs->pN);
1082			DP(BNX2X_MSG_SP, "OCCUPANCY[%d]   : s:%x\n",
1083			   regs->pN, occup);
1084			DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n",
1085			   regs->pN, freed);
1086			break;
1087		}
1088	}
1089	DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n",
1090	   poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN);
1091}
1092
1093static inline u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg,
1094				     u32 expected, u32 poll_count)
1095{
1096	u32 cur_cnt = poll_count;
1097	u32 val;
1098
1099	while ((val = REG_RD(bp, reg)) != expected && cur_cnt--)
1100		udelay(FLR_WAIT_INTERAVAL);
1101
1102	return val;
1103}
1104
1105static inline int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
1106						  char *msg, u32 poll_cnt)
1107{
1108	u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt);
1109	if (val != 0) {
1110		BNX2X_ERR("%s usage count=%d\n", msg, val);
1111		return 1;
1112	}
1113	return 0;
1114}
1115
1116static u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp)
1117{
1118	/* adjust polling timeout */
1119	if (CHIP_REV_IS_EMUL(bp))
1120		return FLR_POLL_CNT * 2000;
1121
1122	if (CHIP_REV_IS_FPGA(bp))
1123		return FLR_POLL_CNT * 120;
1124
1125	return FLR_POLL_CNT;
1126}
1127
1128static void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count)
1129{
1130	struct pbf_pN_cmd_regs cmd_regs[] = {
1131		{0, (CHIP_IS_E3B0(bp)) ?
1132			PBF_REG_TQ_OCCUPANCY_Q0 :
1133			PBF_REG_P0_TQ_OCCUPANCY,
1134		    (CHIP_IS_E3B0(bp)) ?
1135			PBF_REG_TQ_LINES_FREED_CNT_Q0 :
1136			PBF_REG_P0_TQ_LINES_FREED_CNT},
1137		{1, (CHIP_IS_E3B0(bp)) ?
1138			PBF_REG_TQ_OCCUPANCY_Q1 :
1139			PBF_REG_P1_TQ_OCCUPANCY,
1140		    (CHIP_IS_E3B0(bp)) ?
1141			PBF_REG_TQ_LINES_FREED_CNT_Q1 :
1142			PBF_REG_P1_TQ_LINES_FREED_CNT},
1143		{4, (CHIP_IS_E3B0(bp)) ?
1144			PBF_REG_TQ_OCCUPANCY_LB_Q :
1145			PBF_REG_P4_TQ_OCCUPANCY,
1146		    (CHIP_IS_E3B0(bp)) ?
1147			PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
1148			PBF_REG_P4_TQ_LINES_FREED_CNT}
1149	};
1150
1151	struct pbf_pN_buf_regs buf_regs[] = {
1152		{0, (CHIP_IS_E3B0(bp)) ?
1153			PBF_REG_INIT_CRD_Q0 :
1154			PBF_REG_P0_INIT_CRD ,
1155		    (CHIP_IS_E3B0(bp)) ?
1156			PBF_REG_CREDIT_Q0 :
1157			PBF_REG_P0_CREDIT,
1158		    (CHIP_IS_E3B0(bp)) ?
1159			PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
1160			PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
1161		{1, (CHIP_IS_E3B0(bp)) ?
1162			PBF_REG_INIT_CRD_Q1 :
1163			PBF_REG_P1_INIT_CRD,
1164		    (CHIP_IS_E3B0(bp)) ?
1165			PBF_REG_CREDIT_Q1 :
1166			PBF_REG_P1_CREDIT,
1167		    (CHIP_IS_E3B0(bp)) ?
1168			PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
1169			PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
1170		{4, (CHIP_IS_E3B0(bp)) ?
1171			PBF_REG_INIT_CRD_LB_Q :
1172			PBF_REG_P4_INIT_CRD,
1173		    (CHIP_IS_E3B0(bp)) ?
1174			PBF_REG_CREDIT_LB_Q :
1175			PBF_REG_P4_CREDIT,
1176		    (CHIP_IS_E3B0(bp)) ?
1177			PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
1178			PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
1179	};
1180
1181	int i;
1182
1183	/* Verify the command queues are flushed P0, P1, P4 */
1184	for (i = 0; i < ARRAY_SIZE(cmd_regs); i++)
1185		bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count);
1186
1187
1188	/* Verify the transmission buffers are flushed P0, P1, P4 */
1189	for (i = 0; i < ARRAY_SIZE(buf_regs); i++)
1190		bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count);
1191}
1192
1193#define OP_GEN_PARAM(param) \
1194	(((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
1195
1196#define OP_GEN_TYPE(type) \
1197	(((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
1198
1199#define OP_GEN_AGG_VECT(index) \
1200	(((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
1201
1202
1203static inline int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func,
1204					 u32 poll_cnt)
1205{
1206	struct sdm_op_gen op_gen = {0};
1207
1208	u32 comp_addr = BAR_CSTRORM_INTMEM +
1209			CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func);
1210	int ret = 0;
1211
1212	if (REG_RD(bp, comp_addr)) {
1213		BNX2X_ERR("Cleanup complete is not 0\n");
1214		return 1;
1215	}
1216
1217	op_gen.command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
1218	op_gen.command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
1219	op_gen.command |= OP_GEN_AGG_VECT(clnup_func);
1220	op_gen.command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
1221
1222	DP(BNX2X_MSG_SP, "FW Final cleanup\n");
1223	REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen.command);
1224
1225	if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) {
1226		BNX2X_ERR("FW final cleanup did not succeed\n");
1227		ret = 1;
1228	}
1229	/* Zero completion for nxt FLR */
1230	REG_WR(bp, comp_addr, 0);
1231
1232	return ret;
1233}
1234
1235static inline u8 bnx2x_is_pcie_pending(struct pci_dev *dev)
1236{
1237	int pos;
1238	u16 status;
1239
1240	pos = pci_pcie_cap(dev);
1241	if (!pos)
1242		return false;
1243
1244	pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
1245	return status & PCI_EXP_DEVSTA_TRPND;
1246}
1247
1248/* PF FLR specific routines
1249*/
1250static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt)
1251{
1252
1253	/* wait for CFC PF usage-counter to zero (includes all the VFs) */
1254	if (bnx2x_flr_clnup_poll_hw_counter(bp,
1255			CFC_REG_NUM_LCIDS_INSIDE_PF,
1256			"CFC PF usage counter timed out",
1257			poll_cnt))
1258		return 1;
1259
1260
1261	/* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
1262	if (bnx2x_flr_clnup_poll_hw_counter(bp,
1263			DORQ_REG_PF_USAGE_CNT,
1264			"DQ PF usage counter timed out",
1265			poll_cnt))
1266		return 1;
1267
1268	/* Wait for QM PF usage-counter to zero (until DQ cleanup) */
1269	if (bnx2x_flr_clnup_poll_hw_counter(bp,
1270			QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp),
1271			"QM PF usage counter timed out",
1272			poll_cnt))
1273		return 1;
1274
1275	/* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
1276	if (bnx2x_flr_clnup_poll_hw_counter(bp,
1277			TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp),
1278			"Timers VNIC usage counter timed out",
1279			poll_cnt))
1280		return 1;
1281	if (bnx2x_flr_clnup_poll_hw_counter(bp,
1282			TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp),
1283			"Timers NUM_SCANS usage counter timed out",
1284			poll_cnt))
1285		return 1;
1286
1287	/* Wait DMAE PF usage counter to zero */
1288	if (bnx2x_flr_clnup_poll_hw_counter(bp,
1289			dmae_reg_go_c[INIT_DMAE_C(bp)],
1290			"DMAE dommand register timed out",
1291			poll_cnt))
1292		return 1;
1293
1294	return 0;
1295}
1296
1297static void bnx2x_hw_enable_status(struct bnx2x *bp)
1298{
1299	u32 val;
1300
1301	val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF);
1302	DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val);
1303
1304	val = REG_RD(bp, PBF_REG_DISABLE_PF);
1305	DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val);
1306
1307	val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN);
1308	DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val);
1309
1310	val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN);
1311	DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val);
1312
1313	val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
1314	DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val);
1315
1316	val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
1317	DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val);
1318
1319	val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
1320	DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val);
1321
1322	val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
1323	DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n",
1324	   val);
1325}
1326
1327static int bnx2x_pf_flr_clnup(struct bnx2x *bp)
1328{
1329	u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp);
1330
1331	DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp));
1332
1333	/* Re-enable PF target read access */
1334	REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
1335
1336	/* Poll HW usage counters */
1337	if (bnx2x_poll_hw_usage_counters(bp, poll_cnt))
1338		return -EBUSY;
1339
1340	/* Zero the igu 'trailing edge' and 'leading edge' */
1341
1342	/* Send the FW cleanup command */
1343	if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt))
1344		return -EBUSY;
1345
1346	/* ATC cleanup */
1347
1348	/* Verify TX hw is flushed */
1349	bnx2x_tx_hw_flushed(bp, poll_cnt);
1350
1351	/* Wait 100ms (not adjusted according to platform) */
1352	msleep(100);
1353
1354	/* Verify no pending pci transactions */
1355	if (bnx2x_is_pcie_pending(bp->pdev))
1356		BNX2X_ERR("PCIE Transactions still pending\n");
1357
1358	/* Debug */
1359	bnx2x_hw_enable_status(bp);
1360
1361	/*
1362	 * Master enable - Due to WB DMAE writes performed before this
1363	 * register is re-initialized as part of the regular function init
1364	 */
1365	REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
1366
1367	return 0;
1368}
1369
1370static void bnx2x_hc_int_enable(struct bnx2x *bp)
1371{
1372	int port = BP_PORT(bp);
1373	u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
1374	u32 val = REG_RD(bp, addr);
1375	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
1376	int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0;
1377
1378	if (msix) {
1379		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1380			 HC_CONFIG_0_REG_INT_LINE_EN_0);
1381		val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1382			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1383	} else if (msi) {
1384		val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
1385		val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1386			HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1387			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1388	} else {
1389		val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1390			HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1391			HC_CONFIG_0_REG_INT_LINE_EN_0 |
1392			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1393
1394		if (!CHIP_IS_E1(bp)) {
1395			DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n",
1396			   val, port, addr);
1397
1398			REG_WR(bp, addr, val);
1399
1400			val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
1401		}
1402	}
1403
1404	if (CHIP_IS_E1(bp))
1405		REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF);
1406
1407	DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  mode %s\n",
1408	   val, port, addr, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
1409
1410	REG_WR(bp, addr, val);
1411	/*
1412	 * Ensure that HC_CONFIG is written before leading/trailing edge config
1413	 */
1414	mmiowb();
1415	barrier();
1416
1417	if (!CHIP_IS_E1(bp)) {
1418		/* init leading/trailing edge */
1419		if (IS_MF(bp)) {
1420			val = (0xee0f | (1 << (BP_VN(bp) + 4)));
1421			if (bp->port.pmf)
1422				/* enable nig and gpio3 attention */
1423				val |= 0x1100;
1424		} else
1425			val = 0xffff;
1426
1427		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
1428		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
1429	}
1430
1431	/* Make sure that interrupts are indeed enabled from here on */
1432	mmiowb();
1433}
1434
1435static void bnx2x_igu_int_enable(struct bnx2x *bp)
1436{
1437	u32 val;
1438	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
1439	int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0;
1440
1441	val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
1442
1443	if (msix) {
1444		val &= ~(IGU_PF_CONF_INT_LINE_EN |
1445			 IGU_PF_CONF_SINGLE_ISR_EN);
1446		val |= (IGU_PF_CONF_FUNC_EN |
1447			IGU_PF_CONF_MSI_MSIX_EN |
1448			IGU_PF_CONF_ATTN_BIT_EN);
1449	} else if (msi) {
1450		val &= ~IGU_PF_CONF_INT_LINE_EN;
1451		val |= (IGU_PF_CONF_FUNC_EN |
1452			IGU_PF_CONF_MSI_MSIX_EN |
1453			IGU_PF_CONF_ATTN_BIT_EN |
1454			IGU_PF_CONF_SINGLE_ISR_EN);
1455	} else {
1456		val &= ~IGU_PF_CONF_MSI_MSIX_EN;
1457		val |= (IGU_PF_CONF_FUNC_EN |
1458			IGU_PF_CONF_INT_LINE_EN |
1459			IGU_PF_CONF_ATTN_BIT_EN |
1460			IGU_PF_CONF_SINGLE_ISR_EN);
1461	}
1462
1463	DP(NETIF_MSG_INTR, "write 0x%x to IGU  mode %s\n",
1464	   val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
1465
1466	REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
1467
1468	barrier();
1469
1470	/* init leading/trailing edge */
1471	if (IS_MF(bp)) {
1472		val = (0xee0f | (1 << (BP_VN(bp) + 4)));
1473		if (bp->port.pmf)
1474			/* enable nig and gpio3 attention */
1475			val |= 0x1100;
1476	} else
1477		val = 0xffff;
1478
1479	REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
1480	REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
1481
1482	/* Make sure that interrupts are indeed enabled from here on */
1483	mmiowb();
1484}
1485
1486void bnx2x_int_enable(struct bnx2x *bp)
1487{
1488	if (bp->common.int_block == INT_BLOCK_HC)
1489		bnx2x_hc_int_enable(bp);
1490	else
1491		bnx2x_igu_int_enable(bp);
1492}
1493
1494static void bnx2x_hc_int_disable(struct bnx2x *bp)
1495{
1496	int port = BP_PORT(bp);
1497	u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
1498	u32 val = REG_RD(bp, addr);
1499
1500	/*
1501	 * in E1 we must use only PCI configuration space to disable
1502	 * MSI/MSIX capablility
1503	 * It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
1504	 */
1505	if (CHIP_IS_E1(bp)) {
1506		/*  Since IGU_PF_CONF_MSI_MSIX_EN still always on
1507		 *  Use mask register to prevent from HC sending interrupts
1508		 *  after we exit the function
1509		 */
1510		REG_WR(bp, HC_REG_INT_MASK + port*4, 0);
1511
1512		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1513			 HC_CONFIG_0_REG_INT_LINE_EN_0 |
1514			 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1515	} else
1516		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1517			 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1518			 HC_CONFIG_0_REG_INT_LINE_EN_0 |
1519			 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1520
1521	DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n",
1522	   val, port, addr);
1523
1524	/* flush all outstanding writes */
1525	mmiowb();
1526
1527	REG_WR(bp, addr, val);
1528	if (REG_RD(bp, addr) != val)
1529		BNX2X_ERR("BUG! proper val not read from IGU!\n");
1530}
1531
1532static void bnx2x_igu_int_disable(struct bnx2x *bp)
1533{
1534	u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
1535
1536	val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
1537		 IGU_PF_CONF_INT_LINE_EN |
1538		 IGU_PF_CONF_ATTN_BIT_EN);
1539
1540	DP(NETIF_MSG_INTR, "write %x to IGU\n", val);
1541
1542	/* flush all outstanding writes */
1543	mmiowb();
1544
1545	REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
1546	if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val)
1547		BNX2X_ERR("BUG! proper val not read from IGU!\n");
1548}
1549
1550void bnx2x_int_disable(struct bnx2x *bp)
1551{
1552	if (bp->common.int_block == INT_BLOCK_HC)
1553		bnx2x_hc_int_disable(bp);
1554	else
1555		bnx2x_igu_int_disable(bp);
1556}
1557
1558void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
1559{
1560	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
1561	int i, offset;
1562
1563	if (disable_hw)
1564		/* prevent the HW from sending interrupts */
1565		bnx2x_int_disable(bp);
1566
1567	/* make sure all ISRs are done */
1568	if (msix) {
1569		synchronize_irq(bp->msix_table[0].vector);
1570		offset = 1;
1571#ifdef BCM_CNIC
1572		offset++;
1573#endif
1574		for_each_eth_queue(bp, i)
1575			synchronize_irq(bp->msix_table[offset++].vector);
1576	} else
1577		synchronize_irq(bp->pdev->irq);
1578
1579	/* make sure sp_task is not running */
1580	cancel_delayed_work(&bp->sp_task);
1581	cancel_delayed_work(&bp->period_task);
1582	flush_workqueue(bnx2x_wq);
1583}
1584
1585/* fast path */
1586
1587/*
1588 * General service functions
1589 */
1590
1591/* Return true if succeeded to acquire the lock */
1592static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource)
1593{
1594	u32 lock_status;
1595	u32 resource_bit = (1 << resource);
1596	int func = BP_FUNC(bp);
1597	u32 hw_lock_control_reg;
1598
1599	DP(NETIF_MSG_HW, "Trying to take a lock on resource %d\n", resource);
1600
1601	/* Validating that the resource is within range */
1602	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1603		DP(NETIF_MSG_HW,
1604		   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1605		   resource, HW_LOCK_MAX_RESOURCE_VALUE);
1606		return false;
1607	}
1608
1609	if (func <= 5)
1610		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
1611	else
1612		hw_lock_control_reg =
1613				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
1614
1615	/* Try to acquire the lock */
1616	REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
1617	lock_status = REG_RD(bp, hw_lock_control_reg);
1618	if (lock_status & resource_bit)
1619		return true;
1620
1621	DP(NETIF_MSG_HW, "Failed to get a lock on resource %d\n", resource);
1622	return false;
1623}
1624
1625/**
1626 * bnx2x_get_leader_lock_resource - get the recovery leader resource id
1627 *
1628 * @bp:	driver handle
1629 *
1630 * Returns the recovery leader resource id according to the engine this function
1631 * belongs to. Currently only only 2 engines is supported.
1632 */
1633static inline int bnx2x_get_leader_lock_resource(struct bnx2x *bp)
1634{
1635	if (BP_PATH(bp))
1636		return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
1637	else
1638		return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
1639}
1640
1641/**
1642 * bnx2x_trylock_leader_lock- try to aquire a leader lock.
1643 *
1644 * @bp: driver handle
1645 *
1646 * Tries to aquire a leader lock for cuurent engine.
1647 */
1648static inline bool bnx2x_trylock_leader_lock(struct bnx2x *bp)
1649{
1650	return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
1651}
1652
1653#ifdef BCM_CNIC
1654static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err);
1655#endif
1656
1657void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
1658{
1659	struct bnx2x *bp = fp->bp;
1660	int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1661	int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1662	enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX;
1663	struct bnx2x_queue_sp_obj *q_obj = &fp->q_obj;
1664
1665	DP(BNX2X_MSG_SP,
1666	   "fp %d  cid %d  got ramrod #%d  state is %x  type is %d\n",
1667	   fp->index, cid, command, bp->state,
1668	   rr_cqe->ramrod_cqe.ramrod_type);
1669
1670	switch (command) {
1671	case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
1672		DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid);
1673		drv_cmd = BNX2X_Q_CMD_UPDATE;
1674		break;
1675
1676	case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
1677		DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid);
1678		drv_cmd = BNX2X_Q_CMD_SETUP;
1679		break;
1680
1681	case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
1682		DP(NETIF_MSG_IFUP, "got MULTI[%d] tx-only setup ramrod\n", cid);
1683		drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
1684		break;
1685
1686	case (RAMROD_CMD_ID_ETH_HALT):
1687		DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid);
1688		drv_cmd = BNX2X_Q_CMD_HALT;
1689		break;
1690
1691	case (RAMROD_CMD_ID_ETH_TERMINATE):
1692		DP(BNX2X_MSG_SP, "got MULTI[%d] teminate ramrod\n", cid);
1693		drv_cmd = BNX2X_Q_CMD_TERMINATE;
1694		break;
1695
1696	case (RAMROD_CMD_ID_ETH_EMPTY):
1697		DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid);
1698		drv_cmd = BNX2X_Q_CMD_EMPTY;
1699		break;
1700
1701	default:
1702		BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
1703			  command, fp->index);
1704		return;
1705	}
1706
1707	if ((drv_cmd != BNX2X_Q_CMD_MAX) &&
1708	    q_obj->complete_cmd(bp, q_obj, drv_cmd))
1709		/* q_obj->complete_cmd() failure means that this was
1710		 * an unexpected completion.
1711		 *
1712		 * In this case we don't want to increase the bp->spq_left
1713		 * because apparently we haven't sent this command the first
1714		 * place.
1715		 */
1716#ifdef BNX2X_STOP_ON_ERROR
1717		bnx2x_panic();
1718#else
1719		return;
1720#endif
1721
1722	smp_mb__before_atomic_inc();
1723	atomic_inc(&bp->cq_spq_left);
1724	/* push the change in bp->spq_left and towards the memory */
1725	smp_mb__after_atomic_inc();
1726
1727	DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left));
1728
1729	return;
1730}
1731
1732void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp,
1733			u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod)
1734{
1735	u32 start = BAR_USTRORM_INTMEM + fp->ustorm_rx_prods_offset;
1736
1737	bnx2x_update_rx_prod_gen(bp, fp, bd_prod, rx_comp_prod, rx_sge_prod,
1738				 start);
1739}
1740
1741irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
1742{
1743	struct bnx2x *bp = netdev_priv(dev_instance);
1744	u16 status = bnx2x_ack_int(bp);
1745	u16 mask;
1746	int i;
1747	u8 cos;
1748
1749	/* Return here if interrupt is shared and it's not for us */
1750	if (unlikely(status == 0)) {
1751		DP(NETIF_MSG_INTR, "not our interrupt!\n");
1752		return IRQ_NONE;
1753	}
1754	DP(NETIF_MSG_INTR, "got an interrupt  status 0x%x\n", status);
1755
1756#ifdef BNX2X_STOP_ON_ERROR
1757	if (unlikely(bp->panic))
1758		return IRQ_HANDLED;
1759#endif
1760
1761	for_each_eth_queue(bp, i) {
1762		struct bnx2x_fastpath *fp = &bp->fp[i];
1763
1764		mask = 0x2 << (fp->index + CNIC_PRESENT);
1765		if (status & mask) {
1766			/* Handle Rx or Tx according to SB id */
1767			prefetch(fp->rx_cons_sb);
1768			for_each_cos_in_tx_queue(fp, cos)
1769				prefetch(fp->txdata[cos].tx_cons_sb);
1770			prefetch(&fp->sb_running_index[SM_RX_ID]);
1771			napi_schedule(&bnx2x_fp(bp, fp->index, napi));
1772			status &= ~mask;
1773		}
1774	}
1775
1776#ifdef BCM_CNIC
1777	mask = 0x2;
1778	if (status & (mask | 0x1)) {
1779		struct cnic_ops *c_ops = NULL;
1780
1781		if (likely(bp->state == BNX2X_STATE_OPEN)) {
1782			rcu_read_lock();
1783			c_ops = rcu_dereference(bp->cnic_ops);
1784			if (c_ops)
1785				c_ops->cnic_handler(bp->cnic_data, NULL);
1786			rcu_read_unlock();
1787		}
1788
1789		status &= ~mask;
1790	}
1791#endif
1792
1793	if (unlikely(status & 0x1)) {
1794		queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
1795
1796		status &= ~0x1;
1797		if (!status)
1798			return IRQ_HANDLED;
1799	}
1800
1801	if (unlikely(status))
1802		DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
1803		   status);
1804
1805	return IRQ_HANDLED;
1806}
1807
1808/* Link */
1809
1810/*
1811 * General service functions
1812 */
1813
1814int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
1815{
1816	u32 lock_status;
1817	u32 resource_bit = (1 << resource);
1818	int func = BP_FUNC(bp);
1819	u32 hw_lock_control_reg;
1820	int cnt;
1821
1822	/* Validating that the resource is within range */
1823	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1824		DP(NETIF_MSG_HW,
1825		   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1826		   resource, HW_LOCK_MAX_RESOURCE_VALUE);
1827		return -EINVAL;
1828	}
1829
1830	if (func <= 5) {
1831		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
1832	} else {
1833		hw_lock_control_reg =
1834				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
1835	}
1836
1837	/* Validating that the resource is not already taken */
1838	lock_status = REG_RD(bp, hw_lock_control_reg);
1839	if (lock_status & resource_bit) {
1840		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
1841		   lock_status, resource_bit);
1842		return -EEXIST;
1843	}
1844
1845	/* Try for 5 second every 5ms */
1846	for (cnt = 0; cnt < 1000; cnt++) {
1847		/* Try to acquire the lock */
1848		REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
1849		lock_status = REG_RD(bp, hw_lock_control_reg);
1850		if (lock_status & resource_bit)
1851			return 0;
1852
1853		msleep(5);
1854	}
1855	DP(NETIF_MSG_HW, "Timeout\n");
1856	return -EAGAIN;
1857}
1858
1859int bnx2x_release_leader_lock(struct bnx2x *bp)
1860{
1861	return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
1862}
1863
1864int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
1865{
1866	u32 lock_status;
1867	u32 resource_bit = (1 << resource);
1868	int func = BP_FUNC(bp);
1869	u32 hw_lock_control_reg;
1870
1871	DP(NETIF_MSG_HW, "Releasing a lock on resource %d\n", resource);
1872
1873	/* Validating that the resource is within range */
1874	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1875		DP(NETIF_MSG_HW,
1876		   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1877		   resource, HW_LOCK_MAX_RESOURCE_VALUE);
1878		return -EINVAL;
1879	}
1880
1881	if (func <= 5) {
1882		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
1883	} else {
1884		hw_lock_control_reg =
1885				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
1886	}
1887
1888	/* Validating that the resource is currently taken */
1889	lock_status = REG_RD(bp, hw_lock_control_reg);
1890	if (!(lock_status & resource_bit)) {
1891		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
1892		   lock_status, resource_bit);
1893		return -EFAULT;
1894	}
1895
1896	REG_WR(bp, hw_lock_control_reg, resource_bit);
1897	return 0;
1898}
1899
1900
1901int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port)
1902{
1903	/* The GPIO should be swapped if swap register is set and active */
1904	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
1905			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
1906	int gpio_shift = gpio_num +
1907			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
1908	u32 gpio_mask = (1 << gpio_shift);
1909	u32 gpio_reg;
1910	int value;
1911
1912	if (gpio_num > MISC_REGISTERS_GPIO_3) {
1913		BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
1914		return -EINVAL;
1915	}
1916
1917	/* read GPIO value */
1918	gpio_reg = REG_RD(bp, MISC_REG_GPIO);
1919
1920	/* get the requested pin value */
1921	if ((gpio_reg & gpio_mask) == gpio_mask)
1922		value = 1;
1923	else
1924		value = 0;
1925
1926	DP(NETIF_MSG_LINK, "pin %d  value 0x%x\n", gpio_num, value);
1927
1928	return value;
1929}
1930
1931int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
1932{
1933	/* The GPIO should be swapped if swap register is set and active */
1934	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
1935			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
1936	int gpio_shift = gpio_num +
1937			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
1938	u32 gpio_mask = (1 << gpio_shift);
1939	u32 gpio_reg;
1940
1941	if (gpio_num > MISC_REGISTERS_GPIO_3) {
1942		BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
1943		return -EINVAL;
1944	}
1945
1946	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
1947	/* read GPIO and mask except the float bits */
1948	gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
1949
1950	switch (mode) {
1951	case MISC_REGISTERS_GPIO_OUTPUT_LOW:
1952		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
1953		   gpio_num, gpio_shift);
1954		/* clear FLOAT and set CLR */
1955		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
1956		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
1957		break;
1958
1959	case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
1960		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
1961		   gpio_num, gpio_shift);
1962		/* clear FLOAT and set SET */
1963		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
1964		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
1965		break;
1966
1967	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
1968		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
1969		   gpio_num, gpio_shift);
1970		/* set FLOAT */
1971		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
1972		break;
1973
1974	default:
1975		break;
1976	}
1977
1978	REG_WR(bp, MISC_REG_GPIO, gpio_reg);
1979	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
1980
1981	return 0;
1982}
1983
1984int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode)
1985{
1986	u32 gpio_reg = 0;
1987	int rc = 0;
1988
1989	/* Any port swapping should be handled by caller. */
1990
1991	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
1992	/* read GPIO and mask except the float bits */
1993	gpio_reg = REG_RD(bp, MISC_REG_GPIO);
1994	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
1995	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
1996	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
1997
1998	switch (mode) {
1999	case MISC_REGISTERS_GPIO_OUTPUT_LOW:
2000		DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins);
2001		/* set CLR */
2002		gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
2003		break;
2004
2005	case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
2006		DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins);
2007		/* set SET */
2008		gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
2009		break;
2010
2011	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
2012		DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins);
2013		/* set FLOAT */
2014		gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
2015		break;
2016
2017	default:
2018		BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode);
2019		rc = -EINVAL;
2020		break;
2021	}
2022
2023	if (rc == 0)
2024		REG_WR(bp, MISC_REG_GPIO, gpio_reg);
2025
2026	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2027
2028	return rc;
2029}
2030
2031int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
2032{
2033	/* The GPIO should be swapped if swap register is set and active */
2034	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2035			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2036	int gpio_shift = gpio_num +
2037			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2038	u32 gpio_mask = (1 << gpio_shift);
2039	u32 gpio_reg;
2040
2041	if (gpio_num > MISC_REGISTERS_GPIO_3) {
2042		BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2043		return -EINVAL;
2044	}
2045
2046	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2047	/* read GPIO int */
2048	gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT);
2049
2050	switch (mode) {
2051	case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
2052		DP(NETIF_MSG_LINK, "Clear GPIO INT %d (shift %d) -> "
2053				   "output low\n", gpio_num, gpio_shift);
2054		/* clear SET and set CLR */
2055		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
2056		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
2057		break;
2058
2059	case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
2060		DP(NETIF_MSG_LINK, "Set GPIO INT %d (shift %d) -> "
2061				   "output high\n", gpio_num, gpio_shift);
2062		/* clear CLR and set SET */
2063		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
2064		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
2065		break;
2066
2067	default:
2068		break;
2069	}
2070
2071	REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg);
2072	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2073
2074	return 0;
2075}
2076
2077static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
2078{
2079	u32 spio_mask = (1 << spio_num);
2080	u32 spio_reg;
2081
2082	if ((spio_num < MISC_REGISTERS_SPIO_4) ||
2083	    (spio_num > MISC_REGISTERS_SPIO_7)) {
2084		BNX2X_ERR("Invalid SPIO %d\n", spio_num);
2085		return -EINVAL;
2086	}
2087
2088	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
2089	/* read SPIO and mask except the float bits */
2090	spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
2091
2092	switch (mode) {
2093	case MISC_REGISTERS_SPIO_OUTPUT_LOW:
2094		DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
2095		/* clear FLOAT and set CLR */
2096		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
2097		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
2098		break;
2099
2100	case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
2101		DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
2102		/* clear FLOAT and set SET */
2103		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
2104		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
2105		break;
2106
2107	case MISC_REGISTERS_SPIO_INPUT_HI_Z:
2108		DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
2109		/* set FLOAT */
2110		spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
2111		break;
2112
2113	default:
2114		break;
2115	}
2116
2117	REG_WR(bp, MISC_REG_SPIO, spio_reg);
2118	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
2119
2120	return 0;
2121}
2122
2123void bnx2x_calc_fc_adv(struct bnx2x *bp)
2124{
2125	u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
2126	switch (bp->link_vars.ieee_fc &
2127		MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
2128	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
2129		bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
2130						   ADVERTISED_Pause);
2131		break;
2132
2133	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
2134		bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
2135						  ADVERTISED_Pause);
2136		break;
2137
2138	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
2139		bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
2140		break;
2141
2142	default:
2143		bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
2144						   ADVERTISED_Pause);
2145		break;
2146	}
2147}
2148
2149u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
2150{
2151	if (!BP_NOMCP(bp)) {
2152		u8 rc;
2153		int cfx_idx = bnx2x_get_link_cfg_idx(bp);
2154		u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
2155		/*
2156		 * Initialize link parameters structure variables
2157		 * It is recommended to turn off RX FC for jumbo frames
2158		 * for better performance
2159		 */
2160		if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000))
2161			bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
2162		else
2163			bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
2164
2165		bnx2x_acquire_phy_lock(bp);
2166
2167		if (load_mode == LOAD_DIAG) {
2168			struct link_params *lp = &bp->link_params;
2169			lp->loopback_mode = LOOPBACK_XGXS;
2170			/* do PHY loopback at 10G speed, if possible */
2171			if (lp->req_line_speed[cfx_idx] < SPEED_10000) {
2172				if (lp->speed_cap_mask[cfx_idx] &
2173				    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
2174					lp->req_line_speed[cfx_idx] =
2175					SPEED_10000;
2176				else
2177					lp->req_line_speed[cfx_idx] =
2178					SPEED_1000;
2179			}
2180		}
2181
2182		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
2183
2184		bnx2x_release_phy_lock(bp);
2185
2186		bnx2x_calc_fc_adv(bp);
2187
2188		if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
2189			bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2190			bnx2x_link_report(bp);
2191		} else
2192			queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
2193		bp->link_params.req_line_speed[cfx_idx] = req_line_speed;
2194		return rc;
2195	}
2196	BNX2X_ERR("Bootcode is missing - can not initialize link\n");
2197	return -EINVAL;
2198}
2199
2200void bnx2x_link_set(struct bnx2x *bp)
2201{
2202	if (!BP_NOMCP(bp)) {
2203		bnx2x_acquire_phy_lock(bp);
2204		bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
2205		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
2206		bnx2x_release_phy_lock(bp);
2207
2208		bnx2x_calc_fc_adv(bp);
2209	} else
2210		BNX2X_ERR("Bootcode is missing - can not set link\n");
2211}
2212
2213static void bnx2x__link_reset(struct bnx2x *bp)
2214{
2215	if (!BP_NOMCP(bp)) {
2216		bnx2x_acquire_phy_lock(bp);
2217		bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
2218		bnx2x_release_phy_lock(bp);
2219	} else
2220		BNX2X_ERR("Bootcode is missing - can not reset link\n");
2221}
2222
2223u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes)
2224{
2225	u8 rc = 0;
2226
2227	if (!BP_NOMCP(bp)) {
2228		bnx2x_acquire_phy_lock(bp);
2229		rc = bnx2x_test_link(&bp->link_params, &bp->link_vars,
2230				     is_serdes);
2231		bnx2x_release_phy_lock(bp);
2232	} else
2233		BNX2X_ERR("Bootcode is missing - can not test link\n");
2234
2235	return rc;
2236}
2237
2238static void bnx2x_init_port_minmax(struct bnx2x *bp)
2239{
2240	u32 r_param = bp->link_vars.line_speed / 8;
2241	u32 fair_periodic_timeout_usec;
2242	u32 t_fair;
2243
2244	memset(&(bp->cmng.rs_vars), 0,
2245	       sizeof(struct rate_shaping_vars_per_port));
2246	memset(&(bp->cmng.fair_vars), 0, sizeof(struct fairness_vars_per_port));
2247
2248	/* 100 usec in SDM ticks = 25 since each tick is 4 usec */
2249	bp->cmng.rs_vars.rs_periodic_timeout = RS_PERIODIC_TIMEOUT_USEC / 4;
2250
2251	/* this is the threshold below which no timer arming will occur
2252	   1.25 coefficient is for the threshold to be a little bigger
2253	   than the real time, to compensate for timer in-accuracy */
2254	bp->cmng.rs_vars.rs_threshold =
2255				(RS_PERIODIC_TIMEOUT_USEC * r_param * 5) / 4;
2256
2257	/* resolution of fairness timer */
2258	fair_periodic_timeout_usec = QM_ARB_BYTES / r_param;
2259	/* for 10G it is 1000usec. for 1G it is 10000usec. */
2260	t_fair = T_FAIR_COEF / bp->link_vars.line_speed;
2261
2262	/* this is the threshold below which we won't arm the timer anymore */
2263	bp->cmng.fair_vars.fair_threshold = QM_ARB_BYTES;
2264
2265	/* we multiply by 1e3/8 to get bytes/msec.
2266	   We don't want the credits to pass a credit
2267	   of the t_fair*FAIR_MEM (algorithm resolution) */
2268	bp->cmng.fair_vars.upper_bound = r_param * t_fair * FAIR_MEM;
2269	/* since each tick is 4 usec */
2270	bp->cmng.fair_vars.fairness_timeout = fair_periodic_timeout_usec / 4;
2271}
2272
2273/* Calculates the sum of vn_min_rates.
2274   It's needed for further normalizing of the min_rates.
2275   Returns:
2276     sum of vn_min_rates.
2277       or
2278     0 - if all the min_rates are 0.
2279     In the later case fainess algorithm should be deactivated.
2280     If not all min_rates are zero then those that are zeroes will be set to 1.
2281 */
2282static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
2283{
2284	int all_zero = 1;
2285	int vn;
2286
2287	bp->vn_weight_sum = 0;
2288	for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2289		u32 vn_cfg = bp->mf_config[vn];
2290		u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
2291				   FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
2292
2293		/* Skip hidden vns */
2294		if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
2295			continue;
2296
2297		/* If min rate is zero - set it to 1 */
2298		if (!vn_min_rate)
2299			vn_min_rate = DEF_MIN_RATE;
2300		else
2301			all_zero = 0;
2302
2303		bp->vn_weight_sum += vn_min_rate;
2304	}
2305
2306	/* if ETS or all min rates are zeros - disable fairness */
2307	if (BNX2X_IS_ETS_ENABLED(bp)) {
2308		bp->cmng.flags.cmng_enables &=
2309					~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2310		DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n");
2311	} else if (all_zero) {
2312		bp->cmng.flags.cmng_enables &=
2313					~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2314		DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
2315		   "  fairness will be disabled\n");
2316	} else
2317		bp->cmng.flags.cmng_enables |=
2318					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2319}
2320
2321static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
2322{
2323	struct rate_shaping_vars_per_vn m_rs_vn;
2324	struct fairness_vars_per_vn m_fair_vn;
2325	u32 vn_cfg = bp->mf_config[vn];
2326	int func = func_by_vn(bp, vn);
2327	u16 vn_min_rate, vn_max_rate;
2328	int i;
2329
2330	/* If function is hidden - set min and max to zeroes */
2331	if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
2332		vn_min_rate = 0;
2333		vn_max_rate = 0;
2334
2335	} else {
2336		u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg);
2337
2338		vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
2339				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
2340		/* If fairness is enabled (not all min rates are zeroes) and
2341		   if current min rate is zero - set it to 1.
2342		   This is a requirement of the algorithm. */
2343		if (bp->vn_weight_sum && (vn_min_rate == 0))
2344			vn_min_rate = DEF_MIN_RATE;
2345
2346		if (IS_MF_SI(bp))
2347			/* maxCfg in percents of linkspeed */
2348			vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100;
2349		else
2350			/* maxCfg is absolute in 100Mb units */
2351			vn_max_rate = maxCfg * 100;
2352	}
2353
2354	DP(NETIF_MSG_IFUP,
2355	   "func %d: vn_min_rate %d  vn_max_rate %d  vn_weight_sum %d\n",
2356	   func, vn_min_rate, vn_max_rate, bp->vn_weight_sum);
2357
2358	memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
2359	memset(&m_fair_vn, 0, sizeof(struct fairness_vars_per_vn));
2360
2361	/* global vn counter - maximal Mbps for this vn */
2362	m_rs_vn.vn_counter.rate = vn_max_rate;
2363
2364	/* quota - number of bytes transmitted in this period */
2365	m_rs_vn.vn_counter.quota =
2366				(vn_max_rate * RS_PERIODIC_TIMEOUT_USEC) / 8;
2367
2368	if (bp->vn_weight_sum) {
2369		/* credit for each period of the fairness algorithm:
2370		   number of bytes in T_FAIR (the vn share the port rate).
2371		   vn_weight_sum should not be larger than 10000, thus
2372		   T_FAIR_COEF / (8 * vn_weight_sum) will always be greater
2373		   than zero */
2374		m_fair_vn.vn_credit_delta =
2375			max_t(u32, (vn_min_rate * (T_FAIR_COEF /
2376						   (8 * bp->vn_weight_sum))),
2377			      (bp->cmng.fair_vars.fair_threshold +
2378							MIN_ABOVE_THRESH));
2379		DP(NETIF_MSG_IFUP, "m_fair_vn.vn_credit_delta %d\n",
2380		   m_fair_vn.vn_credit_delta);
2381	}
2382
2383	/* Store it to internal memory */
2384	for (i = 0; i < sizeof(struct rate_shaping_vars_per_vn)/4; i++)
2385		REG_WR(bp, BAR_XSTRORM_INTMEM +
2386		       XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func) + i * 4,
2387		       ((u32 *)(&m_rs_vn))[i]);
2388
2389	for (i = 0; i < sizeof(struct fairness_vars_per_vn)/4; i++)
2390		REG_WR(bp, BAR_XSTRORM_INTMEM +
2391		       XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func) + i * 4,
2392		       ((u32 *)(&m_fair_vn))[i]);
2393}
2394
2395static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
2396{
2397	if (CHIP_REV_IS_SLOW(bp))
2398		return CMNG_FNS_NONE;
2399	if (IS_MF(bp))
2400		return CMNG_FNS_MINMAX;
2401
2402	return CMNG_FNS_NONE;
2403}
2404
2405void bnx2x_read_mf_cfg(struct bnx2x *bp)
2406{
2407	int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
2408
2409	if (BP_NOMCP(bp))
2410		return; /* what should be the default bvalue in this case */
2411
2412	/* For 2 port configuration the absolute function number formula
2413	 * is:
2414	 *      abs_func = 2 * vn + BP_PORT + BP_PATH
2415	 *
2416	 *      and there are 4 functions per port
2417	 *
2418	 * For 4 port configuration it is
2419	 *      abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
2420	 *
2421	 *      and there are 2 functions per port
2422	 */
2423	for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2424		int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
2425
2426		if (func >= E1H_FUNC_MAX)
2427			break;
2428
2429		bp->mf_config[vn] =
2430			MF_CFG_RD(bp, func_mf_config[func].config);
2431	}
2432}
2433
2434static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type)
2435{
2436
2437	if (cmng_type == CMNG_FNS_MINMAX) {
2438		int vn;
2439
2440		/* clear cmng_enables */
2441		bp->cmng.flags.cmng_enables = 0;
2442
2443		/* read mf conf from shmem */
2444		if (read_cfg)
2445			bnx2x_read_mf_cfg(bp);
2446
2447		/* Init rate shaping and fairness contexts */
2448		bnx2x_init_port_minmax(bp);
2449
2450		/* vn_weight_sum and enable fairness if not 0 */
2451		bnx2x_calc_vn_weight_sum(bp);
2452
2453		/* calculate and set min-max rate for each vn */
2454		if (bp->port.pmf)
2455			for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
2456				bnx2x_init_vn_minmax(bp, vn);
2457
2458		/* always enable rate shaping and fairness */
2459		bp->cmng.flags.cmng_enables |=
2460					CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
2461		if (!bp->vn_weight_sum)
2462			DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
2463				   "  fairness will be disabled\n");
2464		return;
2465	}
2466
2467	/* rate shaping and fairness are disabled */
2468	DP(NETIF_MSG_IFUP,
2469	   "rate shaping and fairness are disabled\n");
2470}
2471
2472/* This function is called upon link interrupt */
2473static void bnx2x_link_attn(struct bnx2x *bp)
2474{
2475	/* Make sure that we are synced with the current statistics */
2476	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2477
2478	bnx2x_link_update(&bp->link_params, &bp->link_vars);
2479
2480	if (bp->link_vars.link_up) {
2481
2482		/* dropless flow control */
2483		if (!CHIP_IS_E1(bp) && bp->dropless_fc) {
2484			int port = BP_PORT(bp);
2485			u32 pause_enabled = 0;
2486
2487			if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
2488				pause_enabled = 1;
2489
2490			REG_WR(bp, BAR_USTRORM_INTMEM +
2491			       USTORM_ETH_PAUSE_ENABLED_OFFSET(port),
2492			       pause_enabled);
2493		}
2494
2495		if (bp->link_vars.mac_type != MAC_TYPE_EMAC) {
2496			struct host_port_stats *pstats;
2497
2498			pstats = bnx2x_sp(bp, port_stats);
2499			/* reset old mac stats */
2500			memset(&(pstats->mac_stx[0]), 0,
2501			       sizeof(struct mac_stx));
2502		}
2503		if (bp->state == BNX2X_STATE_OPEN)
2504			bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2505	}
2506
2507	if (bp->link_vars.link_up && bp->link_vars.line_speed) {
2508		int cmng_fns = bnx2x_get_cmng_fns_mode(bp);
2509
2510		if (cmng_fns != CMNG_FNS_NONE) {
2511			bnx2x_cmng_fns_init(bp, false, cmng_fns);
2512			storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
2513		} else
2514			/* rate shaping and fairness are disabled */
2515			DP(NETIF_MSG_IFUP,
2516			   "single function mode without fairness\n");
2517	}
2518
2519	__bnx2x_link_report(bp);
2520
2521	if (IS_MF(bp))
2522		bnx2x_link_sync_notify(bp);
2523}
2524
2525void bnx2x__link_status_update(struct bnx2x *bp)
2526{
2527	if (bp->state != BNX2X_STATE_OPEN)
2528		return;
2529
2530	/* read updated dcb configuration */
2531	bnx2x_dcbx_pmf_update(bp);
2532
2533	bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
2534
2535	if (bp->link_vars.link_up)
2536		bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2537	else
2538		bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2539
2540	/* indicate link status */
2541	bnx2x_link_report(bp);
2542}
2543
2544static void bnx2x_pmf_update(struct bnx2x *bp)
2545{
2546	int port = BP_PORT(bp);
2547	u32 val;
2548
2549	bp->port.pmf = 1;
2550	DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
2551
2552	/*
2553	 * We need the mb() to ensure the ordering between the writing to
2554	 * bp->port.pmf here and reading it from the bnx2x_periodic_task().
2555	 */
2556	smp_mb();
2557
2558	/* queue a periodic task */
2559	queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
2560
2561	bnx2x_dcbx_pmf_update(bp);
2562
2563	/* enable nig attention */
2564	val = (0xff0f | (1 << (BP_VN(bp) + 4)));
2565	if (bp->common.int_block == INT_BLOCK_HC) {
2566		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
2567		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
2568	} else if (!CHIP_IS_E1x(bp)) {
2569		REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
2570		REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
2571	}
2572
2573	bnx2x_stats_handle(bp, STATS_EVENT_PMF);
2574}
2575
2576/* end of Link */
2577
2578/* slow path */
2579
2580/*
2581 * General service functions
2582 */
2583
2584/* send the MCP a request, block until there is a reply */
2585u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
2586{
2587	int mb_idx = BP_FW_MB_IDX(bp);
2588	u32 seq;
2589	u32 rc = 0;
2590	u32 cnt = 1;
2591	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
2592
2593	mutex_lock(&bp->fw_mb_mutex);
2594	seq = ++bp->fw_seq;
2595	SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param);
2596	SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq));
2597
2598	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n",
2599			(command | seq), param);
2600
2601	do {
2602		/* let the FW do it's magic ... */
2603		msleep(delay);
2604
2605		rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header);
2606
2607		/* Give the FW up to 5 second (500*10ms) */
2608	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
2609
2610	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
2611	   cnt*delay, rc, seq);
2612
2613	/* is this a reply to our command? */
2614	if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK))
2615		rc &= FW_MSG_CODE_MASK;
2616	else {
2617		/* FW BUG! */
2618		BNX2X_ERR("FW failed to respond!\n");
2619		bnx2x_fw_dump(bp);
2620		rc = 0;
2621	}
2622	mutex_unlock(&bp->fw_mb_mutex);
2623
2624	return rc;
2625}
2626
2627
2628void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p)
2629{
2630	if (CHIP_IS_E1x(bp)) {
2631		struct tstorm_eth_function_common_config tcfg = {0};
2632
2633		storm_memset_func_cfg(bp, &tcfg, p->func_id);
2634	}
2635
2636	/* Enable the function in the FW */
2637	storm_memset_vf_to_pf(bp, p->func_id, p->pf_id);
2638	storm_memset_func_en(bp, p->func_id, 1);
2639
2640	/* spq */
2641	if (p->func_flgs & FUNC_FLG_SPQ) {
2642		storm_memset_spq_addr(bp, p->spq_map, p->func_id);
2643		REG_WR(bp, XSEM_REG_FAST_MEMORY +
2644		       XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod);
2645	}
2646}
2647
2648/**
2649 * bnx2x_get_tx_only_flags - Return common flags
2650 *
2651 * @bp		device handle
2652 * @fp		queue handle
2653 * @zero_stats	TRUE if statistics zeroing is needed
2654 *
2655 * Return the flags that are common for the Tx-only and not normal connections.
2656 */
2657static inline unsigned long bnx2x_get_common_flags(struct bnx2x *bp,
2658						   struct bnx2x_fastpath *fp,
2659						   bool zero_stats)
2660{
2661	unsigned long flags = 0;
2662
2663	/* PF driver will always initialize the Queue to an ACTIVE state */
2664	__set_bit(BNX2X_Q_FLG_ACTIVE, &flags);
2665
2666	/* tx only connections collect statistics (on the same index as the
2667	 *  parent connection). The statistics are zeroed when the parent
2668	 *  connection is initialized.
2669	 */
2670
2671	__set_bit(BNX2X_Q_FLG_STATS, &flags);
2672	if (zero_stats)
2673		__set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags);
2674
2675
2676	return flags;
2677}
2678
2679static inline unsigned long bnx2x_get_q_flags(struct bnx2x *bp,
2680					      struct bnx2x_fastpath *fp,
2681					      bool leading)
2682{
2683	unsigned long flags = 0;
2684
2685	/* calculate other queue flags */
2686	if (IS_MF_SD(bp))
2687		__set_bit(BNX2X_Q_FLG_OV, &flags);
2688
2689	if (IS_FCOE_FP(fp))
2690		__set_bit(BNX2X_Q_FLG_FCOE, &flags);
2691
2692	if (!fp->disable_tpa) {
2693		__set_bit(BNX2X_Q_FLG_TPA, &flags);
2694		__set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags);
2695	}
2696
2697	if (leading) {
2698		__set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags);
2699		__set_bit(BNX2X_Q_FLG_MCAST, &flags);
2700	}
2701
2702	/* Always set HW VLAN stripping */
2703	__set_bit(BNX2X_Q_FLG_VLAN, &flags);
2704
2705
2706	return flags | bnx2x_get_common_flags(bp, fp, true);
2707}
2708
2709static void bnx2x_pf_q_prep_general(struct bnx2x *bp,
2710	struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init,
2711	u8 cos)
2712{
2713	gen_init->stat_id = bnx2x_stats_id(fp);
2714	gen_init->spcl_id = fp->cl_id;
2715
2716	/* Always use mini-jumbo MTU for FCoE L2 ring */
2717	if (IS_FCOE_FP(fp))
2718		gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU;
2719	else
2720		gen_init->mtu = bp->dev->mtu;
2721
2722	gen_init->cos = cos;
2723}
2724
2725static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
2726	struct bnx2x_fastpath *fp, struct rxq_pause_params *pause,
2727	struct bnx2x_rxq_setup_params *rxq_init)
2728{
2729	u8 max_sge = 0;
2730	u16 sge_sz = 0;
2731	u16 tpa_agg_size = 0;
2732
2733	if (!fp->disable_tpa) {
2734		pause->sge_th_lo = SGE_TH_LO(bp);
2735		pause->sge_th_hi = SGE_TH_HI(bp);
2736
2737		/* validate SGE ring has enough to cross high threshold */
2738		WARN_ON(bp->dropless_fc &&
2739				pause->sge_th_hi + FW_PREFETCH_CNT >
2740				MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES);
2741
2742		tpa_agg_size = min_t(u32,
2743			(min_t(u32, 8, MAX_SKB_FRAGS) *
2744			SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff);
2745		max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >>
2746			SGE_PAGE_SHIFT;
2747		max_sge = ((max_sge + PAGES_PER_SGE - 1) &
2748			  (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT;
2749		sge_sz = (u16)min_t(u32, SGE_PAGE_SIZE * PAGES_PER_SGE,
2750				    0xffff);
2751	}
2752
2753	/* pause - not for e1 */
2754	if (!CHIP_IS_E1(bp)) {
2755		pause->bd_th_lo = BD_TH_LO(bp);
2756		pause->bd_th_hi = BD_TH_HI(bp);
2757
2758		pause->rcq_th_lo = RCQ_TH_LO(bp);
2759		pause->rcq_th_hi = RCQ_TH_HI(bp);
2760		/*
2761		 * validate that rings have enough entries to cross
2762		 * high thresholds
2763		 */
2764		WARN_ON(bp->dropless_fc &&
2765				pause->bd_th_hi + FW_PREFETCH_CNT >
2766				bp->rx_ring_size);
2767		WARN_ON(bp->dropless_fc &&
2768				pause->rcq_th_hi + FW_PREFETCH_CNT >
2769				NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT);
2770
2771		pause->pri_map = 1;
2772	}
2773
2774	/* rxq setup */
2775	rxq_init->dscr_map = fp->rx_desc_mapping;
2776	rxq_init->sge_map = fp->rx_sge_mapping;
2777	rxq_init->rcq_map = fp->rx_comp_mapping;
2778	rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE;
2779
2780	/* This should be a maximum number of data bytes that may be
2781	 * placed on the BD (not including paddings).
2782	 */
2783	rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START -
2784		BNX2X_FW_RX_ALIGN_END -	IP_HEADER_ALIGNMENT_PADDING;
2785
2786	rxq_init->cl_qzone_id = fp->cl_qzone_id;
2787	rxq_init->tpa_agg_sz = tpa_agg_size;
2788	rxq_init->sge_buf_sz = sge_sz;
2789	rxq_init->max_sges_pkt = max_sge;
2790	rxq_init->rss_engine_id = BP_FUNC(bp);
2791
2792	/* Maximum number or simultaneous TPA aggregation for this Queue.
2793	 *
2794	 * For PF Clients it should be the maximum avaliable number.
2795	 * VF driver(s) may want to define it to a smaller value.
2796	 */
2797	rxq_init->max_tpa_queues = MAX_AGG_QS(bp);
2798
2799	rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
2800	rxq_init->fw_sb_id = fp->fw_sb_id;
2801
2802	if (IS_FCOE_FP(fp))
2803		rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS;
2804	else
2805		rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
2806}
2807
2808static void bnx2x_pf_tx_q_prep(struct bnx2x *bp,
2809	struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init,
2810	u8 cos)
2811{
2812	txq_init->dscr_map = fp->txdata[cos].tx_desc_mapping;
2813	txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
2814	txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
2815	txq_init->fw_sb_id = fp->fw_sb_id;
2816
2817	/*
2818	 * set the tss leading client id for TX classfication ==
2819	 * leading RSS client id
2820	 */
2821	txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id);
2822
2823	if (IS_FCOE_FP(fp)) {
2824		txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS;
2825		txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE;
2826	}
2827}
2828
2829static void bnx2x_pf_init(struct bnx2x *bp)
2830{
2831	struct bnx2x_func_init_params func_init = {0};
2832	struct event_ring_data eq_data = { {0} };
2833	u16 flags;
2834
2835	if (!CHIP_IS_E1x(bp)) {
2836		/* reset IGU PF statistics: MSIX + ATTN */
2837		/* PF */
2838		REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
2839			   BNX2X_IGU_STAS_MSG_VF_CNT*4 +
2840			   (CHIP_MODE_IS_4_PORT(bp) ?
2841				BP_FUNC(bp) : BP_VN(bp))*4, 0);
2842		/* ATTN */
2843		REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
2844			   BNX2X_IGU_STAS_MSG_VF_CNT*4 +
2845			   BNX2X_IGU_STAS_MSG_PF_CNT*4 +
2846			   (CHIP_MODE_IS_4_PORT(bp) ?
2847				BP_FUNC(bp) : BP_VN(bp))*4, 0);
2848	}
2849
2850	/* function setup flags */
2851	flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
2852
2853	/* This flag is relevant for E1x only.
2854	 * E2 doesn't have a TPA configuration in a function level.
2855	 */
2856	flags |= (bp->flags & TPA_ENABLE_FLAG) ? FUNC_FLG_TPA : 0;
2857
2858	func_init.func_flgs = flags;
2859	func_init.pf_id = BP_FUNC(bp);
2860	func_init.func_id = BP_FUNC(bp);
2861	func_init.spq_map = bp->spq_mapping;
2862	func_init.spq_prod = bp->spq_prod_idx;
2863
2864	bnx2x_func_init(bp, &func_init);
2865
2866	memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port));
2867
2868	/*
2869	 * Congestion management values depend on the link rate
2870	 * There is no active link so initial link rate is set to 10 Gbps.
2871	 * When the link comes up The congestion management values are
2872	 * re-calculated according to the actual link rate.
2873	 */
2874	bp->link_vars.line_speed = SPEED_10000;
2875	bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp));
2876
2877	/* Only the PMF sets the HW */
2878	if (bp->port.pmf)
2879		storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
2880
2881	/* init Event Queue */
2882	eq_data.base_addr.hi = U64_HI(bp->eq_mapping);
2883	eq_data.base_addr.lo = U64_LO(bp->eq_mapping);
2884	eq_data.producer = bp->eq_prod;
2885	eq_data.index_id = HC_SP_INDEX_EQ_CONS;
2886	eq_data.sb_id = DEF_SB_ID;
2887	storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp));
2888}
2889
2890
2891static void bnx2x_e1h_disable(struct bnx2x *bp)
2892{
2893	int port = BP_PORT(bp);
2894
2895	bnx2x_tx_disable(bp);
2896
2897	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
2898}
2899
2900static void bnx2x_e1h_enable(struct bnx2x *bp)
2901{
2902	int port = BP_PORT(bp);
2903
2904	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
2905
2906	/* Tx queue should be only reenabled */
2907	netif_tx_wake_all_queues(bp->dev);
2908
2909	/*
2910	 * Should not call netif_carrier_on since it will be called if the link
2911	 * is up when checking for link state
2912	 */
2913}
2914
2915#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
2916
2917static void bnx2x_drv_info_ether_stat(struct bnx2x *bp)
2918{
2919	struct eth_stats_info *ether_stat =
2920		&bp->slowpath->drv_info_to_mcp.ether_stat;
2921
2922	/* leave last char as NULL */
2923	memcpy(ether_stat->version, DRV_MODULE_VERSION,
2924	       ETH_STAT_INFO_VERSION_LEN - 1);
2925
2926	bp->fp[0].mac_obj.get_n_elements(bp, &bp->fp[0].mac_obj,
2927					 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
2928					 ether_stat->mac_local);
2929
2930	ether_stat->mtu_size = bp->dev->mtu;
2931
2932	if (bp->dev->features & NETIF_F_RXCSUM)
2933		ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
2934	if (bp->dev->features & NETIF_F_TSO)
2935		ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK;
2936	ether_stat->feature_flags |= bp->common.boot_mode;
2937
2938	ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0;
2939
2940	ether_stat->txq_size = bp->tx_ring_size;
2941	ether_stat->rxq_size = bp->rx_ring_size;
2942}
2943
2944static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp)
2945{
2946#ifdef BCM_CNIC
2947	struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app;
2948	struct fcoe_stats_info *fcoe_stat =
2949		&bp->slowpath->drv_info_to_mcp.fcoe_stat;
2950
2951	memcpy(fcoe_stat->mac_local, bp->fip_mac, ETH_ALEN);
2952
2953	fcoe_stat->qos_priority =
2954		app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE];
2955
2956	/* insert FCoE stats from ramrod response */
2957	if (!NO_FCOE(bp)) {
2958		struct tstorm_per_queue_stats *fcoe_q_tstorm_stats =
2959			&bp->fw_stats_data->queue_stats[FCOE_IDX].
2960			tstorm_queue_statistics;
2961
2962		struct xstorm_per_queue_stats *fcoe_q_xstorm_stats =
2963			&bp->fw_stats_data->queue_stats[FCOE_IDX].
2964			xstorm_queue_statistics;
2965
2966		struct fcoe_statistics_params *fw_fcoe_stat =
2967			&bp->fw_stats_data->fcoe;
2968
2969		ADD_64(fcoe_stat->rx_bytes_hi, 0, fcoe_stat->rx_bytes_lo,
2970		       fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt);
2971
2972		ADD_64(fcoe_stat->rx_bytes_hi,
2973		       fcoe_q_tstorm_stats->rcv_ucast_bytes.hi,
2974		       fcoe_stat->rx_bytes_lo,
2975		       fcoe_q_tstorm_stats->rcv_ucast_bytes.lo);
2976
2977		ADD_64(fcoe_stat->rx_bytes_hi,
2978		       fcoe_q_tstorm_stats->rcv_bcast_bytes.hi,
2979		       fcoe_stat->rx_bytes_lo,
2980		       fcoe_q_tstorm_stats->rcv_bcast_bytes.lo);
2981
2982		ADD_64(fcoe_stat->rx_bytes_hi,
2983		       fcoe_q_tstorm_stats->rcv_mcast_bytes.hi,
2984		       fcoe_stat->rx_bytes_lo,
2985		       fcoe_q_tstorm_stats->rcv_mcast_bytes.lo);
2986
2987		ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo,
2988		       fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt);
2989
2990		ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo,
2991		       fcoe_q_tstorm_stats->rcv_ucast_pkts);
2992
2993		ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo,
2994		       fcoe_q_tstorm_stats->rcv_bcast_pkts);
2995
2996		ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo,
2997		       fcoe_q_tstorm_stats->rcv_ucast_pkts);
2998
2999		ADD_64(fcoe_stat->tx_bytes_hi, 0, fcoe_stat->tx_bytes_lo,
3000		       fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt);
3001
3002		ADD_64(fcoe_stat->tx_bytes_hi,
3003		       fcoe_q_xstorm_stats->ucast_bytes_sent.hi,
3004		       fcoe_stat->tx_bytes_lo,
3005		       fcoe_q_xstorm_stats->ucast_bytes_sent.lo);
3006
3007		ADD_64(fcoe_stat->tx_bytes_hi,
3008		       fcoe_q_xstorm_stats->bcast_bytes_sent.hi,
3009		       fcoe_stat->tx_bytes_lo,
3010		       fcoe_q_xstorm_stats->bcast_bytes_sent.lo);
3011
3012		ADD_64(fcoe_stat->tx_bytes_hi,
3013		       fcoe_q_xstorm_stats->mcast_bytes_sent.hi,
3014		       fcoe_stat->tx_bytes_lo,
3015		       fcoe_q_xstorm_stats->mcast_bytes_sent.lo);
3016
3017		ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo,
3018		       fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt);
3019
3020		ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo,
3021		       fcoe_q_xstorm_stats->ucast_pkts_sent);
3022
3023		ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo,
3024		       fcoe_q_xstorm_stats->bcast_pkts_sent);
3025
3026		ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo,
3027		       fcoe_q_xstorm_stats->mcast_pkts_sent);
3028	}
3029
3030	/* ask L5 driver to add data to the struct */
3031	bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD);
3032#endif
3033}
3034
3035static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp)
3036{
3037#ifdef BCM_CNIC
3038	struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app;
3039	struct iscsi_stats_info *iscsi_stat =
3040		&bp->slowpath->drv_info_to_mcp.iscsi_stat;
3041
3042	memcpy(iscsi_stat->mac_local, bp->cnic_eth_dev.iscsi_mac, ETH_ALEN);
3043
3044	iscsi_stat->qos_priority =
3045		app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI];
3046
3047	/* ask L5 driver to add data to the struct */
3048	bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD);
3049#endif
3050}
3051
3052/* called due to MCP event (on pmf):
3053 *	reread new bandwidth configuration
3054 *	configure FW
3055 *	notify others function about the change
3056 */
3057static inline void bnx2x_config_mf_bw(struct bnx2x *bp)
3058{
3059	if (bp->link_vars.link_up) {
3060		bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
3061		bnx2x_link_sync_notify(bp);
3062	}
3063	storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
3064}
3065
3066static inline void bnx2x_set_mf_bw(struct bnx2x *bp)
3067{
3068	bnx2x_config_mf_bw(bp);
3069	bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
3070}
3071
3072static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
3073{
3074	enum drv_info_opcode op_code;
3075	u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control);
3076
3077	/* if drv_info version supported by MFW doesn't match - send NACK */
3078	if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
3079		bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3080		return;
3081	}
3082
3083	op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
3084		  DRV_INFO_CONTROL_OP_CODE_SHIFT;
3085
3086	memset(&bp->slowpath->drv_info_to_mcp, 0,
3087	       sizeof(union drv_info_to_mcp));
3088
3089	switch (op_code) {
3090	case ETH_STATS_OPCODE:
3091		bnx2x_drv_info_ether_stat(bp);
3092		break;
3093	case FCOE_STATS_OPCODE:
3094		bnx2x_drv_info_fcoe_stat(bp);
3095		break;
3096	case ISCSI_STATS_OPCODE:
3097		bnx2x_drv_info_iscsi_stat(bp);
3098		break;
3099	default:
3100		/* if op code isn't supported - send NACK */
3101		bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3102		return;
3103	}
3104
3105	/* if we got drv_info attn from MFW then these fields are defined in
3106	 * shmem2 for sure
3107	 */
3108	SHMEM2_WR(bp, drv_info_host_addr_lo,
3109		U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
3110	SHMEM2_WR(bp, drv_info_host_addr_hi,
3111		U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
3112
3113	bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0);
3114}
3115
3116static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
3117{
3118	DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
3119
3120	if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
3121
3122		/*
3123		 * This is the only place besides the function initialization
3124		 * where the bp->flags can change so it is done without any
3125		 * locks
3126		 */
3127		if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) {
3128			DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n");
3129			bp->flags |= MF_FUNC_DIS;
3130
3131			bnx2x_e1h_disable(bp);
3132		} else {
3133			DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
3134			bp->flags &= ~MF_FUNC_DIS;
3135
3136			bnx2x_e1h_enable(bp);
3137		}
3138		dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
3139	}
3140	if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
3141		bnx2x_config_mf_bw(bp);
3142		dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
3143	}
3144
3145	/* Report results to MCP */
3146	if (dcc_event)
3147		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE, 0);
3148	else
3149		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK, 0);
3150}
3151
3152/* must be called under the spq lock */
3153static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
3154{
3155	struct eth_spe *next_spe = bp->spq_prod_bd;
3156
3157	if (bp->spq_prod_bd == bp->spq_last_bd) {
3158		bp->spq_prod_bd = bp->spq;
3159		bp->spq_prod_idx = 0;
3160		DP(NETIF_MSG_TIMER, "end of spq\n");
3161	} else {
3162		bp->spq_prod_bd++;
3163		bp->spq_prod_idx++;
3164	}
3165	return next_spe;
3166}
3167
3168/* must be called under the spq lock */
3169static inline void bnx2x_sp_prod_update(struct bnx2x *bp)
3170{
3171	int func = BP_FUNC(bp);
3172
3173	/*
3174	 * Make sure that BD data is updated before writing the producer:
3175	 * BD data is written to the memory, the producer is read from the
3176	 * memory, thus we need a full memory barrier to ensure the ordering.
3177	 */
3178	mb();
3179
3180	REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
3181		 bp->spq_prod_idx);
3182	mmiowb();
3183}
3184
3185/**
3186 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
3187 *
3188 * @cmd:	command to check
3189 * @cmd_type:	command type
3190 */
3191static inline bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
3192{
3193	if ((cmd_type == NONE_CONNECTION_TYPE) ||
3194	    (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
3195	    (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
3196	    (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
3197	    (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
3198	    (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
3199	    (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE))
3200		return true;
3201	else
3202		return false;
3203
3204}
3205
3206
3207/**
3208 * bnx2x_sp_post - place a single command on an SP ring
3209 *
3210 * @bp:		driver handle
3211 * @command:	command to place (e.g. SETUP, FILTER_RULES, etc.)
3212 * @cid:	SW CID the command is related to
3213 * @data_hi:	command private data address (high 32 bits)
3214 * @data_lo:	command private data address (low 32 bits)
3215 * @cmd_type:	command type (e.g. NONE, ETH)
3216 *
3217 * SP data is handled as if it's always an address pair, thus data fields are
3218 * not swapped to little endian in upper functions. Instead this function swaps
3219 * data as if it's two u32 fields.
3220 */
3221int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
3222		  u32 data_hi, u32 data_lo, int cmd_type)
3223{
3224	struct eth_spe *spe;
3225	u16 type;
3226	bool common = bnx2x_is_contextless_ramrod(command, cmd_type);
3227
3228#ifdef BNX2X_STOP_ON_ERROR
3229	if (unlikely(bp->panic))
3230		return -EIO;
3231#endif
3232
3233	spin_lock_bh(&bp->spq_lock);
3234
3235	if (common) {
3236		if (!atomic_read(&bp->eq_spq_left)) {
3237			BNX2X_ERR("BUG! EQ ring full!\n");
3238			spin_unlock_bh(&bp->spq_lock);
3239			bnx2x_panic();
3240			return -EBUSY;
3241		}
3242	} else if (!atomic_read(&bp->cq_spq_left)) {
3243			BNX2X_ERR("BUG! SPQ ring full!\n");
3244			spin_unlock_bh(&bp->spq_lock);
3245			bnx2x_panic();
3246			return -EBUSY;
3247	}
3248
3249	spe = bnx2x_sp_get_next(bp);
3250
3251	/* CID needs port number to be encoded int it */
3252	spe->hdr.conn_and_cmd_data =
3253			cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) |
3254				    HW_CID(bp, cid));
3255
3256	type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
3257
3258	type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) &
3259		 SPE_HDR_FUNCTION_ID);
3260
3261	spe->hdr.type = cpu_to_le16(type);
3262
3263	spe->data.update_data_addr.hi = cpu_to_le32(data_hi);
3264	spe->data.update_data_addr.lo = cpu_to_le32(data_lo);
3265
3266	/*
3267	 * It's ok if the actual decrement is issued towards the memory
3268	 * somewhere between the spin_lock and spin_unlock. Thus no
3269	 * more explict memory barrier is needed.
3270	 */
3271	if (common)
3272		atomic_dec(&bp->eq_spq_left);
3273	else
3274		atomic_dec(&bp->cq_spq_left);
3275
3276
3277	DP(BNX2X_MSG_SP/*NETIF_MSG_TIMER*/,
3278	   "SPQE[%x] (%x:%x)  (cmd, common?) (%d,%d)  hw_cid %x  data (%x:%x) "
3279	   "type(0x%x) left (CQ, EQ) (%x,%x)\n",
3280	   bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping),
3281	   (u32)(U64_LO(bp->spq_mapping) +
3282	   (void *)bp->spq_prod_bd - (void *)bp->spq), command, common,
3283	   HW_CID(bp, cid), data_hi, data_lo, type,
3284	   atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left));
3285
3286	bnx2x_sp_prod_update(bp);
3287	spin_unlock_bh(&bp->spq_lock);
3288	return 0;
3289}
3290
3291/* acquire split MCP access lock register */
3292static int bnx2x_acquire_alr(struct bnx2x *bp)
3293{
3294	u32 j, val;
3295	int rc = 0;
3296
3297	might_sleep();
3298	for (j = 0; j < 1000; j++) {
3299		val = (1UL << 31);
3300		REG_WR(bp, GRCBASE_MCP + 0x9c, val);
3301		val = REG_RD(bp, GRCBASE_MCP + 0x9c);
3302		if (val & (1L << 31))
3303			break;
3304
3305		msleep(5);
3306	}
3307	if (!(val & (1L << 31))) {
3308		BNX2X_ERR("Cannot acquire MCP access lock register\n");
3309		rc = -EBUSY;
3310	}
3311
3312	return rc;
3313}
3314
3315/* release split MCP access lock register */
3316static void bnx2x_release_alr(struct bnx2x *bp)
3317{
3318	REG_WR(bp, GRCBASE_MCP + 0x9c, 0);
3319}
3320
3321#define BNX2X_DEF_SB_ATT_IDX	0x0001
3322#define BNX2X_DEF_SB_IDX	0x0002
3323
3324static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
3325{
3326	struct host_sp_status_block *def_sb = bp->def_status_blk;
3327	u16 rc = 0;
3328
3329	barrier(); /* status block is written to by the chip */
3330	if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
3331		bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
3332		rc |= BNX2X_DEF_SB_ATT_IDX;
3333	}
3334
3335	if (bp->def_idx != def_sb->sp_sb.running_index) {
3336		bp->def_idx = def_sb->sp_sb.running_index;
3337		rc |= BNX2X_DEF_SB_IDX;
3338	}
3339
3340	/* Do not reorder: indecies reading should complete before handling */
3341	barrier();
3342	return rc;
3343}
3344
3345/*
3346 * slow path service functions
3347 */
3348
3349static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
3350{
3351	int port = BP_PORT(bp);
3352	u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
3353			      MISC_REG_AEU_MASK_ATTN_FUNC_0;
3354	u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
3355				       NIG_REG_MASK_INTERRUPT_PORT0;
3356	u32 aeu_mask;
3357	u32 nig_mask = 0;
3358	u32 reg_addr;
3359
3360	if (bp->attn_state & asserted)
3361		BNX2X_ERR("IGU ERROR\n");
3362
3363	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
3364	aeu_mask = REG_RD(bp, aeu_addr);
3365
3366	DP(NETIF_MSG_HW, "aeu_mask %x  newly asserted %x\n",
3367	   aeu_mask, asserted);
3368	aeu_mask &= ~(asserted & 0x3ff);
3369	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
3370
3371	REG_WR(bp, aeu_addr, aeu_mask);
3372	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
3373
3374	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
3375	bp->attn_state |= asserted;
3376	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
3377
3378	if (asserted & ATTN_HARD_WIRED_MASK) {
3379		if (asserted & ATTN_NIG_FOR_FUNC) {
3380
3381			bnx2x_acquire_phy_lock(bp);
3382
3383			/* save nig interrupt mask */
3384			nig_mask = REG_RD(bp, nig_int_mask_addr);
3385
3386			/* If nig_mask is not set, no need to call the update
3387			 * function.
3388			 */
3389			if (nig_mask) {
3390				REG_WR(bp, nig_int_mask_addr, 0);
3391
3392				bnx2x_link_attn(bp);
3393			}
3394
3395			/* handle unicore attn? */
3396		}
3397		if (asserted & ATTN_SW_TIMER_4_FUNC)
3398			DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n");
3399
3400		if (asserted & GPIO_2_FUNC)
3401			DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n");
3402
3403		if (asserted & GPIO_3_FUNC)
3404			DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n");
3405
3406		if (asserted & GPIO_4_FUNC)
3407			DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n");
3408
3409		if (port == 0) {
3410			if (asserted & ATTN_GENERAL_ATTN_1) {
3411				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n");
3412				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
3413			}
3414			if (asserted & ATTN_GENERAL_ATTN_2) {
3415				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n");
3416				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
3417			}
3418			if (asserted & ATTN_GENERAL_ATTN_3) {
3419				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n");
3420				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
3421			}
3422		} else {
3423			if (asserted & ATTN_GENERAL_ATTN_4) {
3424				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n");
3425				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
3426			}
3427			if (asserted & ATTN_GENERAL_ATTN_5) {
3428				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n");
3429				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
3430			}
3431			if (asserted & ATTN_GENERAL_ATTN_6) {
3432				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n");
3433				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
3434			}
3435		}
3436
3437	} /* if hardwired */
3438
3439	if (bp->common.int_block == INT_BLOCK_HC)
3440		reg_addr = (HC_REG_COMMAND_REG + port*32 +
3441			    COMMAND_REG_ATTN_BITS_SET);
3442	else
3443		reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8);
3444
3445	DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted,
3446	   (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
3447	REG_WR(bp, reg_addr, asserted);
3448
3449	/* now set back the mask */
3450	if (asserted & ATTN_NIG_FOR_FUNC) {
3451		REG_WR(bp, nig_int_mask_addr, nig_mask);
3452		bnx2x_release_phy_lock(bp);
3453	}
3454}
3455
3456static inline void bnx2x_fan_failure(struct bnx2x *bp)
3457{
3458	int port = BP_PORT(bp);
3459	u32 ext_phy_config;
3460	/* mark the failure */
3461	ext_phy_config =
3462		SHMEM_RD(bp,
3463			 dev_info.port_hw_config[port].external_phy_config);
3464
3465	ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
3466	ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
3467	SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
3468		 ext_phy_config);
3469
3470	/* log the failure */
3471	netdev_err(bp->dev, "Fan Failure on Network Controller has caused"
3472	       " the driver to shutdown the card to prevent permanent"
3473	       " damage.  Please contact OEM Support for assistance\n");
3474
3475	/*
3476	 * Scheudle device reset (unload)
3477	 * This is due to some boards consuming sufficient power when driver is
3478	 * up to overheat if fan fails.
3479	 */
3480	smp_mb__before_clear_bit();
3481	set_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state);
3482	smp_mb__after_clear_bit();
3483	schedule_delayed_work(&bp->sp_rtnl_task, 0);
3484
3485}
3486
3487static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
3488{
3489	int port = BP_PORT(bp);
3490	int reg_offset;
3491	u32 val;
3492
3493	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
3494			     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
3495
3496	if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
3497
3498		val = REG_RD(bp, reg_offset);
3499		val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
3500		REG_WR(bp, reg_offset, val);
3501
3502		BNX2X_ERR("SPIO5 hw attention\n");
3503
3504		/* Fan failure attention */
3505		bnx2x_hw_reset_phy(&bp->link_params);
3506		bnx2x_fan_failure(bp);
3507	}
3508
3509	if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) {
3510		bnx2x_acquire_phy_lock(bp);
3511		bnx2x_handle_module_detect_int(&bp->link_params);
3512		bnx2x_release_phy_lock(bp);
3513	}
3514
3515	if (attn & HW_INTERRUT_ASSERT_SET_0) {
3516
3517		val = REG_RD(bp, reg_offset);
3518		val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
3519		REG_WR(bp, reg_offset, val);
3520
3521		BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
3522			  (u32)(attn & HW_INTERRUT_ASSERT_SET_0));
3523		bnx2x_panic();
3524	}
3525}
3526
3527static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
3528{
3529	u32 val;
3530
3531	if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
3532
3533		val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
3534		BNX2X_ERR("DB hw attention 0x%x\n", val);
3535		/* DORQ discard attention */
3536		if (val & 0x2)
3537			BNX2X_ERR("FATAL error from DORQ\n");
3538	}
3539
3540	if (attn & HW_INTERRUT_ASSERT_SET_1) {
3541
3542		int port = BP_PORT(bp);
3543		int reg_offset;
3544
3545		reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
3546				     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
3547
3548		val = REG_RD(bp, reg_offset);
3549		val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
3550		REG_WR(bp, reg_offset, val);
3551
3552		BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
3553			  (u32)(attn & HW_INTERRUT_ASSERT_SET_1));
3554		bnx2x_panic();
3555	}
3556}
3557
3558static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
3559{
3560	u32 val;
3561
3562	if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
3563
3564		val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
3565		BNX2X_ERR("CFC hw attention 0x%x\n", val);
3566		/* CFC error attention */
3567		if (val & 0x2)
3568			BNX2X_ERR("FATAL error from CFC\n");
3569	}
3570
3571	if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
3572		val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
3573		BNX2X_ERR("PXP hw attention-0 0x%x\n", val);
3574		/* RQ_USDMDP_FIFO_OVERFLOW */
3575		if (val & 0x18000)
3576			BNX2X_ERR("FATAL error from PXP\n");
3577
3578		if (!CHIP_IS_E1x(bp)) {
3579			val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1);
3580			BNX2X_ERR("PXP hw attention-1 0x%x\n", val);
3581		}
3582	}
3583
3584	if (attn & HW_INTERRUT_ASSERT_SET_2) {
3585
3586		int port = BP_PORT(bp);
3587		int reg_offset;
3588
3589		reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
3590				     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
3591
3592		val = REG_RD(bp, reg_offset);
3593		val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
3594		REG_WR(bp, reg_offset, val);
3595
3596		BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
3597			  (u32)(attn & HW_INTERRUT_ASSERT_SET_2));
3598		bnx2x_panic();
3599	}
3600}
3601
3602static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
3603{
3604	u32 val;
3605
3606	if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
3607
3608		if (attn & BNX2X_PMF_LINK_ASSERT) {
3609			int func = BP_FUNC(bp);
3610
3611			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
3612			bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp,
3613					func_mf_config[BP_ABS_FUNC(bp)].config);
3614			val = SHMEM_RD(bp,
3615				       func_mb[BP_FW_MB_IDX(bp)].drv_status);
3616			if (val & DRV_STATUS_DCC_EVENT_MASK)
3617				bnx2x_dcc_event(bp,
3618					    (val & DRV_STATUS_DCC_EVENT_MASK));
3619
3620			if (val & DRV_STATUS_SET_MF_BW)
3621				bnx2x_set_mf_bw(bp);
3622
3623			if (val & DRV_STATUS_DRV_INFO_REQ)
3624				bnx2x_handle_drv_info_req(bp);
3625			if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
3626				bnx2x_pmf_update(bp);
3627
3628			if (bp->port.pmf &&
3629			    (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
3630				bp->dcbx_enabled > 0)
3631				/* start dcbx state machine */
3632				bnx2x_dcbx_set_params(bp,
3633					BNX2X_DCBX_STATE_NEG_RECEIVED);
3634			if (bp->link_vars.periodic_flags &
3635			    PERIODIC_FLAGS_LINK_EVENT) {
3636				/*  sync with link */
3637				bnx2x_acquire_phy_lock(bp);
3638				bp->link_vars.periodic_flags &=
3639					~PERIODIC_FLAGS_LINK_EVENT;
3640				bnx2x_release_phy_lock(bp);
3641				if (IS_MF(bp))
3642					bnx2x_link_sync_notify(bp);
3643				bnx2x_link_report(bp);
3644			}
3645			/* Always call it here: bnx2x_link_report() will
3646			 * prevent the link indication duplication.
3647			 */
3648			bnx2x__link_status_update(bp);
3649		} else if (attn & BNX2X_MC_ASSERT_BITS) {
3650
3651			BNX2X_ERR("MC assert!\n");
3652			bnx2x_mc_assert(bp);
3653			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
3654			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
3655			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
3656			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
3657			bnx2x_panic();
3658
3659		} else if (attn & BNX2X_MCP_ASSERT) {
3660
3661			BNX2X_ERR("MCP assert!\n");
3662			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
3663			bnx2x_fw_dump(bp);
3664
3665		} else
3666			BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
3667	}
3668
3669	if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
3670		BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn);
3671		if (attn & BNX2X_GRC_TIMEOUT) {
3672			val = CHIP_IS_E1(bp) ? 0 :
3673					REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN);
3674			BNX2X_ERR("GRC time-out 0x%08x\n", val);
3675		}
3676		if (attn & BNX2X_GRC_RSV) {
3677			val = CHIP_IS_E1(bp) ? 0 :
3678					REG_RD(bp, MISC_REG_GRC_RSV_ATTN);
3679			BNX2X_ERR("GRC reserved 0x%08x\n", val);
3680		}
3681		REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
3682	}
3683}
3684
3685/*
3686 * Bits map:
3687 * 0-7   - Engine0 load counter.
3688 * 8-15  - Engine1 load counter.
3689 * 16    - Engine0 RESET_IN_PROGRESS bit.
3690 * 17    - Engine1 RESET_IN_PROGRESS bit.
3691 * 18    - Engine0 ONE_IS_LOADED. Set when there is at least one active function
3692 *         on the engine
3693 * 19    - Engine1 ONE_IS_LOADED.
3694 * 20    - Chip reset flow bit. When set none-leader must wait for both engines
3695 *         leader to complete (check for both RESET_IN_PROGRESS bits and not for
3696 *         just the one belonging to its engine).
3697 *
3698 */
3699#define BNX2X_RECOVERY_GLOB_REG		MISC_REG_GENERIC_POR_1
3700
3701#define BNX2X_PATH0_LOAD_CNT_MASK	0x000000ff
3702#define BNX2X_PATH0_LOAD_CNT_SHIFT	0
3703#define BNX2X_PATH1_LOAD_CNT_MASK	0x0000ff00
3704#define BNX2X_PATH1_LOAD_CNT_SHIFT	8
3705#define BNX2X_PATH0_RST_IN_PROG_BIT	0x00010000
3706#define BNX2X_PATH1_RST_IN_PROG_BIT	0x00020000
3707#define BNX2X_GLOBAL_RESET_BIT		0x00040000
3708
3709/*
3710 * Set the GLOBAL_RESET bit.
3711 *
3712 * Should be run under rtnl lock
3713 */
3714void bnx2x_set_reset_global(struct bnx2x *bp)
3715{
3716	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3717
3718	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
3719	barrier();
3720	mmiowb();
3721}
3722
3723/*
3724 * Clear the GLOBAL_RESET bit.
3725 *
3726 * Should be run under rtnl lock
3727 */
3728static inline void bnx2x_clear_reset_global(struct bnx2x *bp)
3729{
3730	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3731
3732	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
3733	barrier();
3734	mmiowb();
3735}
3736
3737/*
3738 * Checks the GLOBAL_RESET bit.
3739 *
3740 * should be run under rtnl lock
3741 */
3742static inline bool bnx2x_reset_is_global(struct bnx2x *bp)
3743{
3744	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3745
3746	DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val);
3747	return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false;
3748}
3749
3750/*
3751 * Clear RESET_IN_PROGRESS bit for the current engine.
3752 *
3753 * Should be run under rtnl lock
3754 */
3755static inline void bnx2x_set_reset_done(struct bnx2x *bp)
3756{
3757	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3758	u32 bit = BP_PATH(bp) ?
3759		BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
3760
3761	/* Clear the bit */
3762	val &= ~bit;
3763	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
3764	barrier();
3765	mmiowb();
3766}
3767
3768/*
3769 * Set RESET_IN_PROGRESS for the current engine.
3770 *
3771 * should be run under rtnl lock
3772 */
3773void bnx2x_set_reset_in_progress(struct bnx2x *bp)
3774{
3775	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3776	u32 bit = BP_PATH(bp) ?
3777		BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
3778
3779	/* Set the bit */
3780	val |= bit;
3781	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
3782	barrier();
3783	mmiowb();
3784}
3785
3786/*
3787 * Checks the RESET_IN_PROGRESS bit for the given engine.
3788 * should be run under rtnl lock
3789 */
3790bool bnx2x_reset_is_done(struct bnx2x *bp, int engine)
3791{
3792	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3793	u32 bit = engine ?
3794		BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
3795
3796	/* return false if bit is set */
3797	return (val & bit) ? false : true;
3798}
3799
3800/*
3801 * Increment the load counter for the current engine.
3802 *
3803 * should be run under rtnl lock
3804 */
3805void bnx2x_inc_load_cnt(struct bnx2x *bp)
3806{
3807	u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3808	u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
3809			     BNX2X_PATH0_LOAD_CNT_MASK;
3810	u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
3811			     BNX2X_PATH0_LOAD_CNT_SHIFT;
3812
3813	DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val);
3814
3815	/* get the current counter value */
3816	val1 = (val & mask) >> shift;
3817
3818	/* increment... */
3819	val1++;
3820
3821	/* clear the old value */
3822	val &= ~mask;
3823
3824	/* set the new one */
3825	val |= ((val1 << shift) & mask);
3826
3827	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
3828	barrier();
3829	mmiowb();
3830}
3831
3832/**
3833 * bnx2x_dec_load_cnt - decrement the load counter
3834 *
3835 * @bp:		driver handle
3836 *
3837 * Should be run under rtnl lock.
3838 * Decrements the load counter for the current engine. Returns
3839 * the new counter value.
3840 */
3841u32 bnx2x_dec_load_cnt(struct bnx2x *bp)
3842{
3843	u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3844	u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
3845			     BNX2X_PATH0_LOAD_CNT_MASK;
3846	u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
3847			     BNX2X_PATH0_LOAD_CNT_SHIFT;
3848
3849	DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val);
3850
3851	/* get the current counter value */
3852	val1 = (val & mask) >> shift;
3853
3854	/* decrement... */
3855	val1--;
3856
3857	/* clear the old value */
3858	val &= ~mask;
3859
3860	/* set the new one */
3861	val |= ((val1 << shift) & mask);
3862
3863	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
3864	barrier();
3865	mmiowb();
3866
3867	return val1;
3868}
3869
3870/*
3871 * Read the load counter for the current engine.
3872 *
3873 * should be run under rtnl lock
3874 */
3875static inline u32 bnx2x_get_load_cnt(struct bnx2x *bp, int engine)
3876{
3877	u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK :
3878			     BNX2X_PATH0_LOAD_CNT_MASK);
3879	u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
3880			     BNX2X_PATH0_LOAD_CNT_SHIFT);
3881	u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3882
3883	DP(NETIF_MSG_HW, "GLOB_REG=0x%08x\n", val);
3884
3885	val = (val & mask) >> shift;
3886
3887	DP(NETIF_MSG_HW, "load_cnt for engine %d = %d\n", engine, val);
3888
3889	return val;
3890}
3891
3892/*
3893 * Reset the load counter for the current engine.
3894 *
3895 * should be run under rtnl lock
3896 */
3897static inline void bnx2x_clear_load_cnt(struct bnx2x *bp)
3898{
3899	u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
3900	u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
3901			     BNX2X_PATH0_LOAD_CNT_MASK);
3902
3903	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask));
3904}
3905
3906static inline void _print_next_block(int idx, const char *blk)
3907{
3908	pr_cont("%s%s", idx ? ", " : "", blk);
3909}
3910
3911static inline int bnx2x_check_blocks_with_parity0(u32 sig, int par_num,
3912						  bool print)
3913{
3914	int i = 0;
3915	u32 cur_bit = 0;
3916	for (i = 0; sig; i++) {
3917		cur_bit = ((u32)0x1 << i);
3918		if (sig & cur_bit) {
3919			switch (cur_bit) {
3920			case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
3921				if (print)
3922					_print_next_block(par_num++, "BRB");
3923				break;
3924			case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
3925				if (print)
3926					_print_next_block(par_num++, "PARSER");
3927				break;
3928			case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
3929				if (print)
3930					_print_next_block(par_num++, "TSDM");
3931				break;
3932			case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
3933				if (print)
3934					_print_next_block(par_num++,
3935							  "SEARCHER");
3936				break;
3937			case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
3938				if (print)
3939					_print_next_block(par_num++, "TCM");
3940				break;
3941			case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
3942				if (print)
3943					_print_next_block(par_num++, "TSEMI");
3944				break;
3945			case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
3946				if (print)
3947					_print_next_block(par_num++, "XPB");
3948				break;
3949			}
3950
3951			/* Clear the bit */
3952			sig &= ~cur_bit;
3953		}
3954	}
3955
3956	return par_num;
3957}
3958
3959static inline int bnx2x_check_blocks_with_parity1(u32 sig, int par_num,
3960						  bool *global, bool print)
3961{
3962	int i = 0;
3963	u32 cur_bit = 0;
3964	for (i = 0; sig; i++) {
3965		cur_bit = ((u32)0x1 << i);
3966		if (sig & cur_bit) {
3967			switch (cur_bit) {
3968			case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
3969				if (print)
3970					_print_next_block(par_num++, "PBF");
3971				break;
3972			case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
3973				if (print)
3974					_print_next_block(par_num++, "QM");
3975				break;
3976			case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
3977				if (print)
3978					_print_next_block(par_num++, "TM");
3979				break;
3980			case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
3981				if (print)
3982					_print_next_block(par_num++, "XSDM");
3983				break;
3984			case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
3985				if (print)
3986					_print_next_block(par_num++, "XCM");
3987				break;
3988			case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
3989				if (print)
3990					_print_next_block(par_num++, "XSEMI");
3991				break;
3992			case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
3993				if (print)
3994					_print_next_block(par_num++,
3995							  "DOORBELLQ");
3996				break;
3997			case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
3998				if (print)
3999					_print_next_block(par_num++, "NIG");
4000				break;
4001			case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
4002				if (print)
4003					_print_next_block(par_num++,
4004							  "VAUX PCI CORE");
4005				*global = true;
4006				break;
4007			case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
4008				if (print)
4009					_print_next_block(par_num++, "DEBUG");
4010				break;
4011			case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
4012				if (print)
4013					_print_next_block(par_num++, "USDM");
4014				break;
4015			case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
4016				if (print)
4017					_print_next_block(par_num++, "UCM");
4018				break;
4019			case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
4020				if (print)
4021					_print_next_block(par_num++, "USEMI");
4022				break;
4023			case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
4024				if (print)
4025					_print_next_block(par_num++, "UPB");
4026				break;
4027			case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
4028				if (print)
4029					_print_next_block(par_num++, "CSDM");
4030				break;
4031			case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
4032				if (print)
4033					_print_next_block(par_num++, "CCM");
4034				break;
4035			}
4036
4037			/* Clear the bit */
4038			sig &= ~cur_bit;
4039		}
4040	}
4041
4042	return par_num;
4043}
4044
4045static inline int bnx2x_check_blocks_with_parity2(u32 sig, int par_num,
4046						  bool print)
4047{
4048	int i = 0;
4049	u32 cur_bit = 0;
4050	for (i = 0; sig; i++) {
4051		cur_bit = ((u32)0x1 << i);
4052		if (sig & cur_bit) {
4053			switch (cur_bit) {
4054			case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
4055				if (print)
4056					_print_next_block(par_num++, "CSEMI");
4057				break;
4058			case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
4059				if (print)
4060					_print_next_block(par_num++, "PXP");
4061				break;
4062			case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
4063				if (print)
4064					_print_next_block(par_num++,
4065					"PXPPCICLOCKCLIENT");
4066				break;
4067			case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
4068				if (print)
4069					_print_next_block(par_num++, "CFC");
4070				break;
4071			case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
4072				if (print)
4073					_print_next_block(par_num++, "CDU");
4074				break;
4075			case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
4076				if (print)
4077					_print_next_block(par_num++, "DMAE");
4078				break;
4079			case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
4080				if (print)
4081					_print_next_block(par_num++, "IGU");
4082				break;
4083			case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
4084				if (print)
4085					_print_next_block(par_num++, "MISC");
4086				break;
4087			}
4088
4089			/* Clear the bit */
4090			sig &= ~cur_bit;
4091		}
4092	}
4093
4094	return par_num;
4095}
4096
4097static inline int bnx2x_check_blocks_with_parity3(u32 sig, int par_num,
4098						  bool *global, bool print)
4099{
4100	int i = 0;
4101	u32 cur_bit = 0;
4102	for (i = 0; sig; i++) {
4103		cur_bit = ((u32)0x1 << i);
4104		if (sig & cur_bit) {
4105			switch (cur_bit) {
4106			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
4107				if (print)
4108					_print_next_block(par_num++, "MCP ROM");
4109				*global = true;
4110				break;
4111			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
4112				if (print)
4113					_print_next_block(par_num++,
4114							  "MCP UMP RX");
4115				*global = true;
4116				break;
4117			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
4118				if (print)
4119					_print_next_block(par_num++,
4120							  "MCP UMP TX");
4121				*global = true;
4122				break;
4123			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
4124				if (print)
4125					_print_next_block(par_num++,
4126							  "MCP SCPAD");
4127				*global = true;
4128				break;
4129			}
4130
4131			/* Clear the bit */
4132			sig &= ~cur_bit;
4133		}
4134	}
4135
4136	return par_num;
4137}
4138
4139static inline int bnx2x_check_blocks_with_parity4(u32 sig, int par_num,
4140						  bool print)
4141{
4142	int i = 0;
4143	u32 cur_bit = 0;
4144	for (i = 0; sig; i++) {
4145		cur_bit = ((u32)0x1 << i);
4146		if (sig & cur_bit) {
4147			switch (cur_bit) {
4148			case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
4149				if (print)
4150					_print_next_block(par_num++, "PGLUE_B");
4151				break;
4152			case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
4153				if (print)
4154					_print_next_block(par_num++, "ATC");
4155				break;
4156			}
4157
4158			/* Clear the bit */
4159			sig &= ~cur_bit;
4160		}
4161	}
4162
4163	return par_num;
4164}
4165
4166static inline bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
4167				     u32 *sig)
4168{
4169	if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
4170	    (sig[1] & HW_PRTY_ASSERT_SET_1) ||
4171	    (sig[2] & HW_PRTY_ASSERT_SET_2) ||
4172	    (sig[3] & HW_PRTY_ASSERT_SET_3) ||
4173	    (sig[4] & HW_PRTY_ASSERT_SET_4)) {
4174		int par_num = 0;
4175		DP(NETIF_MSG_HW, "Was parity error: HW block parity attention: "
4176			"[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x "
4177			"[4]:0x%08x\n",
4178			  sig[0] & HW_PRTY_ASSERT_SET_0,
4179			  sig[1] & HW_PRTY_ASSERT_SET_1,
4180			  sig[2] & HW_PRTY_ASSERT_SET_2,
4181			  sig[3] & HW_PRTY_ASSERT_SET_3,
4182			  sig[4] & HW_PRTY_ASSERT_SET_4);
4183		if (print)
4184			netdev_err(bp->dev,
4185				   "Parity errors detected in blocks: ");
4186		par_num = bnx2x_check_blocks_with_parity0(
4187			sig[0] & HW_PRTY_ASSERT_SET_0, par_num, print);
4188		par_num = bnx2x_check_blocks_with_parity1(
4189			sig[1] & HW_PRTY_ASSERT_SET_1, par_num, global, print);
4190		par_num = bnx2x_check_blocks_with_parity2(
4191			sig[2] & HW_PRTY_ASSERT_SET_2, par_num, print);
4192		par_num = bnx2x_check_blocks_with_parity3(
4193			sig[3] & HW_PRTY_ASSERT_SET_3, par_num, global, print);
4194		par_num = bnx2x_check_blocks_with_parity4(
4195			sig[4] & HW_PRTY_ASSERT_SET_4, par_num, print);
4196
4197		if (print)
4198			pr_cont("\n");
4199
4200		return true;
4201	} else
4202		return false;
4203}
4204
4205/**
4206 * bnx2x_chk_parity_attn - checks for parity attentions.
4207 *
4208 * @bp:		driver handle
4209 * @global:	true if there was a global attention
4210 * @print:	show parity attention in syslog
4211 */
4212bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print)
4213{
4214	struct attn_route attn = { {0} };
4215	int port = BP_PORT(bp);
4216
4217	attn.sig[0] = REG_RD(bp,
4218		MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
4219			     port*4);
4220	attn.sig[1] = REG_RD(bp,
4221		MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 +
4222			     port*4);
4223	attn.sig[2] = REG_RD(bp,
4224		MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 +
4225			     port*4);
4226	attn.sig[3] = REG_RD(bp,
4227		MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 +
4228			     port*4);
4229
4230	if (!CHIP_IS_E1x(bp))
4231		attn.sig[4] = REG_RD(bp,
4232			MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 +
4233				     port*4);
4234
4235	return bnx2x_parity_attn(bp, global, print, attn.sig);
4236}
4237
4238
4239static inline void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn)
4240{
4241	u32 val;
4242	if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
4243
4244		val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
4245		BNX2X_ERR("PGLUE hw attention 0x%x\n", val);
4246		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
4247			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4248				  "ADDRESS_ERROR\n");
4249		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
4250			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4251				  "INCORRECT_RCV_BEHAVIOR\n");
4252		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
4253			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4254				  "WAS_ERROR_ATTN\n");
4255		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
4256			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4257				  "VF_LENGTH_VIOLATION_ATTN\n");
4258		if (val &
4259		    PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
4260			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4261				  "VF_GRC_SPACE_VIOLATION_ATTN\n");
4262		if (val &
4263		    PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
4264			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4265				  "VF_MSIX_BAR_VIOLATION_ATTN\n");
4266		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
4267			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4268				  "TCPL_ERROR_ATTN\n");
4269		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
4270			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4271				  "TCPL_IN_TWO_RCBS_ATTN\n");
4272		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
4273			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
4274				  "CSSNOOP_FIFO_OVERFLOW\n");
4275	}
4276	if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
4277		val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR);
4278		BNX2X_ERR("ATC hw attention 0x%x\n", val);
4279		if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
4280			BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
4281		if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
4282			BNX2X_ERR("ATC_ATC_INT_STS_REG"
4283				  "_ATC_TCPL_TO_NOT_PEND\n");
4284		if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
4285			BNX2X_ERR("ATC_ATC_INT_STS_REG_"
4286				  "ATC_GPA_MULTIPLE_HITS\n");
4287		if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
4288			BNX2X_ERR("ATC_ATC_INT_STS_REG_"
4289				  "ATC_RCPL_TO_EMPTY_CNT\n");
4290		if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
4291			BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
4292		if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
4293			BNX2X_ERR("ATC_ATC_INT_STS_REG_"
4294				  "ATC_IREQ_LESS_THAN_STU\n");
4295	}
4296
4297	if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
4298		    AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
4299		BNX2X_ERR("FATAL parity attention set4 0x%x\n",
4300		(u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
4301		    AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
4302	}
4303
4304}
4305
4306static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
4307{
4308	struct attn_route attn, *group_mask;
4309	int port = BP_PORT(bp);
4310	int index;
4311	u32 reg_addr;
4312	u32 val;
4313	u32 aeu_mask;
4314	bool global = false;
4315
4316	/* need to take HW lock because MCP or other port might also
4317	   try to handle this event */
4318	bnx2x_acquire_alr(bp);
4319
4320	if (bnx2x_chk_parity_attn(bp, &global, true)) {
4321#ifndef BNX2X_STOP_ON_ERROR
4322		bp->recovery_state = BNX2X_RECOVERY_INIT;
4323		schedule_delayed_work(&bp->sp_rtnl_task, 0);
4324		/* Disable HW interrupts */
4325		bnx2x_int_disable(bp);
4326		/* In case of parity errors don't handle attentions so that
4327		 * other function would "see" parity errors.
4328		 */
4329#else
4330		bnx2x_panic();
4331#endif
4332		bnx2x_release_alr(bp);
4333		return;
4334	}
4335
4336	attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
4337	attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
4338	attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
4339	attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
4340	if (!CHIP_IS_E1x(bp))
4341		attn.sig[4] =
4342		      REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4);
4343	else
4344		attn.sig[4] = 0;
4345
4346	DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n",
4347	   attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]);
4348
4349	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
4350		if (deasserted & (1 << index)) {
4351			group_mask = &bp->attn_group[index];
4352
4353			DP(NETIF_MSG_HW, "group[%d]: %08x %08x "
4354					 "%08x %08x %08x\n",
4355			   index,
4356			   group_mask->sig[0], group_mask->sig[1],
4357			   group_mask->sig[2], group_mask->sig[3],
4358			   group_mask->sig[4]);
4359
4360			bnx2x_attn_int_deasserted4(bp,
4361					attn.sig[4] & group_mask->sig[4]);
4362			bnx2x_attn_int_deasserted3(bp,
4363					attn.sig[3] & group_mask->sig[3]);
4364			bnx2x_attn_int_deasserted1(bp,
4365					attn.sig[1] & group_mask->sig[1]);
4366			bnx2x_attn_int_deasserted2(bp,
4367					attn.sig[2] & group_mask->sig[2]);
4368			bnx2x_attn_int_deasserted0(bp,
4369					attn.sig[0] & group_mask->sig[0]);
4370		}
4371	}
4372
4373	bnx2x_release_alr(bp);
4374
4375	if (bp->common.int_block == INT_BLOCK_HC)
4376		reg_addr = (HC_REG_COMMAND_REG + port*32 +
4377			    COMMAND_REG_ATTN_BITS_CLR);
4378	else
4379		reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8);
4380
4381	val = ~deasserted;
4382	DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val,
4383	   (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
4384	REG_WR(bp, reg_addr, val);
4385
4386	if (~bp->attn_state & deasserted)
4387		BNX2X_ERR("IGU ERROR\n");
4388
4389	reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
4390			  MISC_REG_AEU_MASK_ATTN_FUNC_0;
4391
4392	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4393	aeu_mask = REG_RD(bp, reg_addr);
4394
4395	DP(NETIF_MSG_HW, "aeu_mask %x  newly deasserted %x\n",
4396	   aeu_mask, deasserted);
4397	aeu_mask |= (deasserted & 0x3ff);
4398	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
4399
4400	REG_WR(bp, reg_addr, aeu_mask);
4401	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4402
4403	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
4404	bp->attn_state &= ~deasserted;
4405	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
4406}
4407
4408static void bnx2x_attn_int(struct bnx2x *bp)
4409{
4410	/* read local copy of bits */
4411	u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
4412								attn_bits);
4413	u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
4414								attn_bits_ack);
4415	u32 attn_state = bp->attn_state;
4416
4417	/* look for changed bits */
4418	u32 asserted   =  attn_bits & ~attn_ack & ~attn_state;
4419	u32 deasserted = ~attn_bits &  attn_ack &  attn_state;
4420
4421	DP(NETIF_MSG_HW,
4422	   "attn_bits %x  attn_ack %x  asserted %x  deasserted %x\n",
4423	   attn_bits, attn_ack, asserted, deasserted);
4424
4425	if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state))
4426		BNX2X_ERR("BAD attention state\n");
4427
4428	/* handle bits that were raised */
4429	if (asserted)
4430		bnx2x_attn_int_asserted(bp, asserted);
4431
4432	if (deasserted)
4433		bnx2x_attn_int_deasserted(bp, deasserted);
4434}
4435
4436void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
4437		      u16 index, u8 op, u8 update)
4438{
4439	u32 igu_addr = BAR_IGU_INTMEM + (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
4440
4441	bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update,
4442			     igu_addr);
4443}
4444
4445static inline void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod)
4446{
4447	/* No memory barriers */
4448	storm_memset_eq_prod(bp, prod, BP_FUNC(bp));
4449	mmiowb(); /* keep prod updates ordered */
4450}
4451
4452#ifdef BCM_CNIC
4453static int  bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid,
4454				      union event_ring_elem *elem)
4455{
4456	u8 err = elem->message.error;
4457
4458	if (!bp->cnic_eth_dev.starting_cid  ||
4459	    (cid < bp->cnic_eth_dev.starting_cid &&
4460	    cid != bp->cnic_eth_dev.iscsi_l2_cid))
4461		return 1;
4462
4463	DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid);
4464
4465	if (unlikely(err)) {
4466
4467		BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
4468			  cid);
4469		bnx2x_panic_dump(bp);
4470	}
4471	bnx2x_cnic_cfc_comp(bp, cid, err);
4472	return 0;
4473}
4474#endif
4475
4476static inline void bnx2x_handle_mcast_eqe(struct bnx2x *bp)
4477{
4478	struct bnx2x_mcast_ramrod_params rparam;
4479	int rc;
4480
4481	memset(&rparam, 0, sizeof(rparam));
4482
4483	rparam.mcast_obj = &bp->mcast_obj;
4484
4485	netif_addr_lock_bh(bp->dev);
4486
4487	/* Clear pending state for the last command */
4488	bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw);
4489
4490	/* If there are pending mcast commands - send them */
4491	if (bp->mcast_obj.check_pending(&bp->mcast_obj)) {
4492		rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
4493		if (rc < 0)
4494			BNX2X_ERR("Failed to send pending mcast commands: %d\n",
4495				  rc);
4496	}
4497
4498	netif_addr_unlock_bh(bp->dev);
4499}
4500
4501static inline void bnx2x_handle_classification_eqe(struct bnx2x *bp,
4502						   union event_ring_elem *elem)
4503{
4504	unsigned long ramrod_flags = 0;
4505	int rc = 0;
4506	u32 cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
4507	struct bnx2x_vlan_mac_obj *vlan_mac_obj;
4508
4509	/* Always push next commands out, don't wait here */
4510	__set_bit(RAMROD_CONT, &ramrod_flags);
4511
4512	switch (elem->message.data.eth_event.echo >> BNX2X_SWCID_SHIFT) {
4513	case BNX2X_FILTER_MAC_PENDING:
4514#ifdef BCM_CNIC
4515		if (cid == BNX2X_ISCSI_ETH_CID)
4516			vlan_mac_obj = &bp->iscsi_l2_mac_obj;
4517		else
4518#endif
4519			vlan_mac_obj = &bp->fp[cid].mac_obj;
4520
4521		break;
4522	case BNX2X_FILTER_MCAST_PENDING:
4523		/* This is only relevant for 57710 where multicast MACs are
4524		 * configured as unicast MACs using the same ramrod.
4525		 */
4526		bnx2x_handle_mcast_eqe(bp);
4527		return;
4528	default:
4529		BNX2X_ERR("Unsupported classification command: %d\n",
4530			  elem->message.data.eth_event.echo);
4531		return;
4532	}
4533
4534	rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags);
4535
4536	if (rc < 0)
4537		BNX2X_ERR("Failed to schedule new commands: %d\n", rc);
4538	else if (rc > 0)
4539		DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n");
4540
4541}
4542
4543#ifdef BCM_CNIC
4544static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start);
4545#endif
4546
4547static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
4548{
4549	netif_addr_lock_bh(bp->dev);
4550
4551	clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
4552
4553	/* Send rx_mode command again if was requested */
4554	if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state))
4555		bnx2x_set_storm_rx_mode(bp);
4556#ifdef BCM_CNIC
4557	else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED,
4558				    &bp->sp_state))
4559		bnx2x_set_iscsi_eth_rx_mode(bp, true);
4560	else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
4561				    &bp->sp_state))
4562		bnx2x_set_iscsi_eth_rx_mode(bp, false);
4563#endif
4564
4565	netif_addr_unlock_bh(bp->dev);
4566}
4567
4568static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
4569	struct bnx2x *bp, u32 cid)
4570{
4571	DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
4572#ifdef BCM_CNIC
4573	if (cid == BNX2X_FCOE_ETH_CID)
4574		return &bnx2x_fcoe(bp, q_obj);
4575	else
4576#endif
4577		return &bnx2x_fp(bp, CID_TO_FP(cid), q_obj);
4578}
4579
4580static void bnx2x_eq_int(struct bnx2x *bp)
4581{
4582	u16 hw_cons, sw_cons, sw_prod;
4583	union event_ring_elem *elem;
4584	u32 cid;
4585	u8 opcode;
4586	int spqe_cnt = 0;
4587	struct bnx2x_queue_sp_obj *q_obj;
4588	struct bnx2x_func_sp_obj *f_obj = &bp->func_obj;
4589	struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw;
4590
4591	hw_cons = le16_to_cpu(*bp->eq_cons_sb);
4592
4593	/* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256.
4594	 * when we get the the next-page we nned to adjust so the loop
4595	 * condition below will be met. The next element is the size of a
4596	 * regular element and hence incrementing by 1
4597	 */
4598	if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
4599		hw_cons++;
4600
4601	/* This function may never run in parallel with itself for a
4602	 * specific bp, thus there is no need in "paired" read memory
4603	 * barrier here.
4604	 */
4605	sw_cons = bp->eq_cons;
4606	sw_prod = bp->eq_prod;
4607
4608	DP(BNX2X_MSG_SP, "EQ:  hw_cons %u  sw_cons %u bp->eq_spq_left %x\n",
4609			hw_cons, sw_cons, atomic_read(&bp->eq_spq_left));
4610
4611	for (; sw_cons != hw_cons;
4612	      sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
4613
4614
4615		elem = &bp->eq_ring[EQ_DESC(sw_cons)];
4616
4617		cid = SW_CID(elem->message.data.cfc_del_event.cid);
4618		opcode = elem->message.opcode;
4619
4620
4621		/* handle eq element */
4622		switch (opcode) {
4623		case EVENT_RING_OPCODE_STAT_QUERY:
4624			DP(NETIF_MSG_TIMER, "got statistics comp event %d\n",
4625			   bp->stats_comp++);
4626			/* nothing to do with stats comp */
4627			goto next_spqe;
4628
4629		case EVENT_RING_OPCODE_CFC_DEL:
4630			/* handle according to cid range */
4631			/*
4632			 * we may want to verify here that the bp state is
4633			 * HALTING
4634			 */
4635			DP(BNX2X_MSG_SP,
4636			   "got delete ramrod for MULTI[%d]\n", cid);
4637#ifdef BCM_CNIC
4638			if (!bnx2x_cnic_handle_cfc_del(bp, cid, elem))
4639				goto next_spqe;
4640#endif
4641			q_obj = bnx2x_cid_to_q_obj(bp, cid);
4642
4643			if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL))
4644				break;
4645
4646
4647
4648			goto next_spqe;
4649
4650		case EVENT_RING_OPCODE_STOP_TRAFFIC:
4651			DP(BNX2X_MSG_SP, "got STOP TRAFFIC\n");
4652			if (f_obj->complete_cmd(bp, f_obj,
4653						BNX2X_F_CMD_TX_STOP))
4654				break;
4655			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
4656			goto next_spqe;
4657
4658		case EVENT_RING_OPCODE_START_TRAFFIC:
4659			DP(BNX2X_MSG_SP, "got START TRAFFIC\n");
4660			if (f_obj->complete_cmd(bp, f_obj,
4661						BNX2X_F_CMD_TX_START))
4662				break;
4663			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
4664			goto next_spqe;
4665		case EVENT_RING_OPCODE_FUNCTION_START:
4666			DP(BNX2X_MSG_SP, "got FUNC_START ramrod\n");
4667			if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START))
4668				break;
4669
4670			goto next_spqe;
4671
4672		case EVENT_RING_OPCODE_FUNCTION_STOP:
4673			DP(BNX2X_MSG_SP, "got FUNC_STOP ramrod\n");
4674			if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP))
4675				break;
4676
4677			goto next_spqe;
4678		}
4679
4680		switch (opcode | bp->state) {
4681		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
4682		      BNX2X_STATE_OPEN):
4683		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
4684		      BNX2X_STATE_OPENING_WAIT4_PORT):
4685			cid = elem->message.data.eth_event.echo &
4686				BNX2X_SWCID_MASK;
4687			DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
4688			   cid);
4689			rss_raw->clear_pending(rss_raw);
4690			break;
4691
4692		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
4693		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
4694		case (EVENT_RING_OPCODE_SET_MAC |
4695		      BNX2X_STATE_CLOSING_WAIT4_HALT):
4696		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
4697		      BNX2X_STATE_OPEN):
4698		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
4699		      BNX2X_STATE_DIAG):
4700		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
4701		      BNX2X_STATE_CLOSING_WAIT4_HALT):
4702			DP(BNX2X_MSG_SP, "got (un)set mac ramrod\n");
4703			bnx2x_handle_classification_eqe(bp, elem);
4704			break;
4705
4706		case (EVENT_RING_OPCODE_MULTICAST_RULES |
4707		      BNX2X_STATE_OPEN):
4708		case (EVENT_RING_OPCODE_MULTICAST_RULES |
4709		      BNX2X_STATE_DIAG):
4710		case (EVENT_RING_OPCODE_MULTICAST_RULES |
4711		      BNX2X_STATE_CLOSING_WAIT4_HALT):
4712			DP(BNX2X_MSG_SP, "got mcast ramrod\n");
4713			bnx2x_handle_mcast_eqe(bp);
4714			break;
4715
4716		case (EVENT_RING_OPCODE_FILTERS_RULES |
4717		      BNX2X_STATE_OPEN):
4718		case (EVENT_RING_OPCODE_FILTERS_RULES |
4719		      BNX2X_STATE_DIAG):
4720		case (EVENT_RING_OPCODE_FILTERS_RULES |
4721		      BNX2X_STATE_CLOSING_WAIT4_HALT):
4722			DP(BNX2X_MSG_SP, "got rx_mode ramrod\n");
4723			bnx2x_handle_rx_mode_eqe(bp);
4724			break;
4725		default:
4726			/* unknown event log error and continue */
4727			BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n",
4728				  elem->message.opcode, bp->state);
4729		}
4730next_spqe:
4731		spqe_cnt++;
4732	} /* for */
4733
4734	smp_mb__before_atomic_inc();
4735	atomic_add(spqe_cnt, &bp->eq_spq_left);
4736
4737	bp->eq_cons = sw_cons;
4738	bp->eq_prod = sw_prod;
4739	/* Make sure that above mem writes were issued towards the memory */
4740	smp_wmb();
4741
4742	/* update producer */
4743	bnx2x_update_eq_prod(bp, bp->eq_prod);
4744}
4745
4746static void bnx2x_sp_task(struct work_struct *work)
4747{
4748	struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
4749	u16 status;
4750
4751	status = bnx2x_update_dsb_idx(bp);
4752/*	if (status == 0)				     */
4753/*		BNX2X_ERR("spurious slowpath interrupt!\n"); */
4754
4755	DP(NETIF_MSG_INTR, "got a slowpath interrupt (status 0x%x)\n", status);
4756
4757	/* HW attentions */
4758	if (status & BNX2X_DEF_SB_ATT_IDX) {
4759		bnx2x_attn_int(bp);
4760		status &= ~BNX2X_DEF_SB_ATT_IDX;
4761	}
4762
4763	/* SP events: STAT_QUERY and others */
4764	if (status & BNX2X_DEF_SB_IDX) {
4765#ifdef BCM_CNIC
4766		struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
4767
4768		if ((!NO_FCOE(bp)) &&
4769			(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
4770			/*
4771			 * Prevent local bottom-halves from running as
4772			 * we are going to change the local NAPI list.
4773			 */
4774			local_bh_disable();
4775			napi_schedule(&bnx2x_fcoe(bp, napi));
4776			local_bh_enable();
4777		}
4778#endif
4779		/* Handle EQ completions */
4780		bnx2x_eq_int(bp);
4781
4782		bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID,
4783			le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1);
4784
4785		status &= ~BNX2X_DEF_SB_IDX;
4786	}
4787
4788	if (unlikely(status))
4789		DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
4790		   status);
4791
4792	bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID,
4793	     le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1);
4794}
4795
4796irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
4797{
4798	struct net_device *dev = dev_instance;
4799	struct bnx2x *bp = netdev_priv(dev);
4800
4801	bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0,
4802		     IGU_INT_DISABLE, 0);
4803
4804#ifdef BNX2X_STOP_ON_ERROR
4805	if (unlikely(bp->panic))
4806		return IRQ_HANDLED;
4807#endif
4808
4809#ifdef BCM_CNIC
4810	{
4811		struct cnic_ops *c_ops;
4812
4813		rcu_read_lock();
4814		c_ops = rcu_dereference(bp->cnic_ops);
4815		if (c_ops)
4816			c_ops->cnic_handler(bp->cnic_data, NULL);
4817		rcu_read_unlock();
4818	}
4819#endif
4820	queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
4821
4822	return IRQ_HANDLED;
4823}
4824
4825/* end of slow path */
4826
4827
4828void bnx2x_drv_pulse(struct bnx2x *bp)
4829{
4830	SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb,
4831		 bp->fw_drv_pulse_wr_seq);
4832}
4833
4834
4835static void bnx2x_timer(unsigned long data)
4836{
4837	u8 cos;
4838	struct bnx2x *bp = (struct bnx2x *) data;
4839
4840	if (!netif_running(bp->dev))
4841		return;
4842
4843	if (poll) {
4844		struct bnx2x_fastpath *fp = &bp->fp[0];
4845
4846		for_each_cos_in_tx_queue(fp, cos)
4847			bnx2x_tx_int(bp, &fp->txdata[cos]);
4848		bnx2x_rx_int(fp, 1000);
4849	}
4850
4851	if (!BP_NOMCP(bp)) {
4852		int mb_idx = BP_FW_MB_IDX(bp);
4853		u32 drv_pulse;
4854		u32 mcp_pulse;
4855
4856		++bp->fw_drv_pulse_wr_seq;
4857		bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
4858		/* TBD - add SYSTEM_TIME */
4859		drv_pulse = bp->fw_drv_pulse_wr_seq;
4860		bnx2x_drv_pulse(bp);
4861
4862		mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) &
4863			     MCP_PULSE_SEQ_MASK);
4864		/* The delta between driver pulse and mcp response
4865		 * should be 1 (before mcp response) or 0 (after mcp response)
4866		 */
4867		if ((drv_pulse != mcp_pulse) &&
4868		    (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
4869			/* someone lost a heartbeat... */
4870			BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
4871				  drv_pulse, mcp_pulse);
4872		}
4873	}
4874
4875	if (bp->state == BNX2X_STATE_OPEN)
4876		bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
4877
4878	mod_timer(&bp->timer, jiffies + bp->current_interval);
4879}
4880
4881/* end of Statistics */
4882
4883/* nic init */
4884
4885/*
4886 * nic init service functions
4887 */
4888
4889static inline void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
4890{
4891	u32 i;
4892	if (!(len%4) && !(addr%4))
4893		for (i = 0; i < len; i += 4)
4894			REG_WR(bp, addr + i, fill);
4895	else
4896		for (i = 0; i < len; i++)
4897			REG_WR8(bp, addr + i, fill);
4898
4899}
4900
4901/* helper: writes FP SP data to FW - data_size in dwords */
4902static inline void bnx2x_wr_fp_sb_data(struct bnx2x *bp,
4903				       int fw_sb_id,
4904				       u32 *sb_data_p,
4905				       u32 data_size)
4906{
4907	int index;
4908	for (index = 0; index < data_size; index++)
4909		REG_WR(bp, BAR_CSTRORM_INTMEM +
4910			CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
4911			sizeof(u32)*index,
4912			*(sb_data_p + index));
4913}
4914
4915static inline void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id)
4916{
4917	u32 *sb_data_p;
4918	u32 data_size = 0;
4919	struct hc_status_block_data_e2 sb_data_e2;
4920	struct hc_status_block_data_e1x sb_data_e1x;
4921
4922	/* disable the function first */
4923	if (!CHIP_IS_E1x(bp)) {
4924		memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
4925		sb_data_e2.common.state = SB_DISABLED;
4926		sb_data_e2.common.p_func.vf_valid = false;
4927		sb_data_p = (u32 *)&sb_data_e2;
4928		data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
4929	} else {
4930		memset(&sb_data_e1x, 0,
4931		       sizeof(struct hc_status_block_data_e1x));
4932		sb_data_e1x.common.state = SB_DISABLED;
4933		sb_data_e1x.common.p_func.vf_valid = false;
4934		sb_data_p = (u32 *)&sb_data_e1x;
4935		data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
4936	}
4937	bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
4938
4939	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
4940			CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0,
4941			CSTORM_STATUS_BLOCK_SIZE);
4942	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
4943			CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0,
4944			CSTORM_SYNC_BLOCK_SIZE);
4945}
4946
4947/* helper:  writes SP SB data to FW */
4948static inline void bnx2x_wr_sp_sb_data(struct bnx2x *bp,
4949		struct hc_sp_status_block_data *sp_sb_data)
4950{
4951	int func = BP_FUNC(bp);
4952	int i;
4953	for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
4954		REG_WR(bp, BAR_CSTRORM_INTMEM +
4955			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
4956			i*sizeof(u32),
4957			*((u32 *)sp_sb_data + i));
4958}
4959
4960static inline void bnx2x_zero_sp_sb(struct bnx2x *bp)
4961{
4962	int func = BP_FUNC(bp);
4963	struct hc_sp_status_block_data sp_sb_data;
4964	memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
4965
4966	sp_sb_data.state = SB_DISABLED;
4967	sp_sb_data.p_func.vf_valid = false;
4968
4969	bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
4970
4971	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
4972			CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0,
4973			CSTORM_SP_STATUS_BLOCK_SIZE);
4974	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
4975			CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0,
4976			CSTORM_SP_SYNC_BLOCK_SIZE);
4977
4978}
4979
4980
4981static inline
4982void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
4983					   int igu_sb_id, int igu_seg_id)
4984{
4985	hc_sm->igu_sb_id = igu_sb_id;
4986	hc_sm->igu_seg_id = igu_seg_id;
4987	hc_sm->timer_value = 0xFF;
4988	hc_sm->time_to_expire = 0xFFFFFFFF;
4989}
4990
4991
4992/* allocates state machine ids. */
4993static inline
4994void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
4995{
4996	/* zero out state machine indices */
4997	/* rx indices */
4998	index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
4999
5000	/* tx indices */
5001	index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
5002	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
5003	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
5004	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
5005
5006	/* map indices */
5007	/* rx indices */
5008	index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
5009		SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5010
5011	/* tx indices */
5012	index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
5013		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5014	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
5015		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5016	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
5017		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5018	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
5019		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5020}
5021
5022static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
5023			  u8 vf_valid, int fw_sb_id, int igu_sb_id)
5024{
5025	int igu_seg_id;
5026
5027	struct hc_status_block_data_e2 sb_data_e2;
5028	struct hc_status_block_data_e1x sb_data_e1x;
5029	struct hc_status_block_sm  *hc_sm_p;
5030	int data_size;
5031	u32 *sb_data_p;
5032
5033	if (CHIP_INT_MODE_IS_BC(bp))
5034		igu_seg_id = HC_SEG_ACCESS_NORM;
5035	else
5036		igu_seg_id = IGU_SEG_ACCESS_NORM;
5037
5038	bnx2x_zero_fp_sb(bp, fw_sb_id);
5039
5040	if (!CHIP_IS_E1x(bp)) {
5041		memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
5042		sb_data_e2.common.state = SB_ENABLED;
5043		sb_data_e2.common.p_func.pf_id = BP_FUNC(bp);
5044		sb_data_e2.common.p_func.vf_id = vfid;
5045		sb_data_e2.common.p_func.vf_valid = vf_valid;
5046		sb_data_e2.common.p_func.vnic_id = BP_VN(bp);
5047		sb_data_e2.common.same_igu_sb_1b = true;
5048		sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping);
5049		sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping);
5050		hc_sm_p = sb_data_e2.common.state_machine;
5051		sb_data_p = (u32 *)&sb_data_e2;
5052		data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
5053		bnx2x_map_sb_state_machines(sb_data_e2.index_data);
5054	} else {
5055		memset(&sb_data_e1x, 0,
5056		       sizeof(struct hc_status_block_data_e1x));
5057		sb_data_e1x.common.state = SB_ENABLED;
5058		sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp);
5059		sb_data_e1x.common.p_func.vf_id = 0xff;
5060		sb_data_e1x.common.p_func.vf_valid = false;
5061		sb_data_e1x.common.p_func.vnic_id = BP_VN(bp);
5062		sb_data_e1x.common.same_igu_sb_1b = true;
5063		sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping);
5064		sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping);
5065		hc_sm_p = sb_data_e1x.common.state_machine;
5066		sb_data_p = (u32 *)&sb_data_e1x;
5067		data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
5068		bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
5069	}
5070
5071	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
5072				       igu_sb_id, igu_seg_id);
5073	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID],
5074				       igu_sb_id, igu_seg_id);
5075
5076	DP(NETIF_MSG_HW, "Init FW SB %d\n", fw_sb_id);
5077
5078	/* write indecies to HW */
5079	bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
5080}
5081
5082static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id,
5083				     u16 tx_usec, u16 rx_usec)
5084{
5085	bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS,
5086				    false, rx_usec);
5087	bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
5088				       HC_INDEX_ETH_TX_CQ_CONS_COS0, false,
5089				       tx_usec);
5090	bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
5091				       HC_INDEX_ETH_TX_CQ_CONS_COS1, false,
5092				       tx_usec);
5093	bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
5094				       HC_INDEX_ETH_TX_CQ_CONS_COS2, false,
5095				       tx_usec);
5096}
5097
5098static void bnx2x_init_def_sb(struct bnx2x *bp)
5099{
5100	struct host_sp_status_block *def_sb = bp->def_status_blk;
5101	dma_addr_t mapping = bp->def_status_blk_mapping;
5102	int igu_sp_sb_index;
5103	int igu_seg_id;
5104	int port = BP_PORT(bp);
5105	int func = BP_FUNC(bp);
5106	int reg_offset, reg_offset_en5;
5107	u64 section;
5108	int index;
5109	struct hc_sp_status_block_data sp_sb_data;
5110	memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
5111
5112	if (CHIP_INT_MODE_IS_BC(bp)) {
5113		igu_sp_sb_index = DEF_SB_IGU_ID;
5114		igu_seg_id = HC_SEG_ACCESS_DEF;
5115	} else {
5116		igu_sp_sb_index = bp->igu_dsb_id;
5117		igu_seg_id = IGU_SEG_ACCESS_DEF;
5118	}
5119
5120	/* ATTN */
5121	section = ((u64)mapping) + offsetof(struct host_sp_status_block,
5122					    atten_status_block);
5123	def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
5124
5125	bp->attn_state = 0;
5126
5127	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
5128			     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
5129	reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
5130				 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
5131	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
5132		int sindex;
5133		/* take care of sig[0]..sig[4] */
5134		for (sindex = 0; sindex < 4; sindex++)
5135			bp->attn_group[index].sig[sindex] =
5136			   REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index);
5137
5138		if (!CHIP_IS_E1x(bp))
5139			/*
5140			 * enable5 is separate from the rest of the registers,
5141			 * and therefore the address skip is 4
5142			 * and not 16 between the different groups
5143			 */
5144			bp->attn_group[index].sig[4] = REG_RD(bp,
5145					reg_offset_en5 + 0x4*index);
5146		else
5147			bp->attn_group[index].sig[4] = 0;
5148	}
5149
5150	if (bp->common.int_block == INT_BLOCK_HC) {
5151		reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
5152				     HC_REG_ATTN_MSG0_ADDR_L);
5153
5154		REG_WR(bp, reg_offset, U64_LO(section));
5155		REG_WR(bp, reg_offset + 4, U64_HI(section));
5156	} else if (!CHIP_IS_E1x(bp)) {
5157		REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
5158		REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
5159	}
5160
5161	section = ((u64)mapping) + offsetof(struct host_sp_status_block,
5162					    sp_sb);
5163
5164	bnx2x_zero_sp_sb(bp);
5165
5166	sp_sb_data.state		= SB_ENABLED;
5167	sp_sb_data.host_sb_addr.lo	= U64_LO(section);
5168	sp_sb_data.host_sb_addr.hi	= U64_HI(section);
5169	sp_sb_data.igu_sb_id		= igu_sp_sb_index;
5170	sp_sb_data.igu_seg_id		= igu_seg_id;
5171	sp_sb_data.p_func.pf_id		= func;
5172	sp_sb_data.p_func.vnic_id	= BP_VN(bp);
5173	sp_sb_data.p_func.vf_id		= 0xff;
5174
5175	bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
5176
5177	bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
5178}
5179
5180void bnx2x_update_coalesce(struct bnx2x *bp)
5181{
5182	int i;
5183
5184	for_each_eth_queue(bp, i)
5185		bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id,
5186					 bp->tx_ticks, bp->rx_ticks);
5187}
5188
5189static void bnx2x_init_sp_ring(struct bnx2x *bp)
5190{
5191	spin_lock_init(&bp->spq_lock);
5192	atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING);
5193
5194	bp->spq_prod_idx = 0;
5195	bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
5196	bp->spq_prod_bd = bp->spq;
5197	bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
5198}
5199
5200static void bnx2x_init_eq_ring(struct bnx2x *bp)
5201{
5202	int i;
5203	for (i = 1; i <= NUM_EQ_PAGES; i++) {
5204		union event_ring_elem *elem =
5205			&bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1];
5206
5207		elem->next_page.addr.hi =
5208			cpu_to_le32(U64_HI(bp->eq_mapping +
5209				   BCM_PAGE_SIZE * (i % NUM_EQ_PAGES)));
5210		elem->next_page.addr.lo =
5211			cpu_to_le32(U64_LO(bp->eq_mapping +
5212				   BCM_PAGE_SIZE*(i % NUM_EQ_PAGES)));
5213	}
5214	bp->eq_cons = 0;
5215	bp->eq_prod = NUM_EQ_DESC;
5216	bp->eq_cons_sb = BNX2X_EQ_INDEX;
5217	/* we want a warning message before it gets rought... */
5218	atomic_set(&bp->eq_spq_left,
5219		min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1);
5220}
5221
5222
5223/* called with netif_addr_lock_bh() */
5224void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id,
5225			 unsigned long rx_mode_flags,
5226			 unsigned long rx_accept_flags,
5227			 unsigned long tx_accept_flags,
5228			 unsigned long ramrod_flags)
5229{
5230	struct bnx2x_rx_mode_ramrod_params ramrod_param;
5231	int rc;
5232
5233	memset(&ramrod_param, 0, sizeof(ramrod_param));
5234
5235	/* Prepare ramrod parameters */
5236	ramrod_param.cid = 0;
5237	ramrod_param.cl_id = cl_id;
5238	ramrod_param.rx_mode_obj = &bp->rx_mode_obj;
5239	ramrod_param.func_id = BP_FUNC(bp);
5240
5241	ramrod_param.pstate = &bp->sp_state;
5242	ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING;
5243
5244	ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata);
5245	ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata);
5246
5247	set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
5248
5249	ramrod_param.ramrod_flags = ramrod_flags;
5250	ramrod_param.rx_mode_flags = rx_mode_flags;
5251
5252	ramrod_param.rx_accept_flags = rx_accept_flags;
5253	ramrod_param.tx_accept_flags = tx_accept_flags;
5254
5255	rc = bnx2x_config_rx_mode(bp, &ramrod_param);
5256	if (rc < 0) {
5257		BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode);
5258		return;
5259	}
5260}
5261
5262/* called with netif_addr_lock_bh() */
5263void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
5264{
5265	unsigned long rx_mode_flags = 0, ramrod_flags = 0;
5266	unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
5267
5268#ifdef BCM_CNIC
5269	if (!NO_FCOE(bp))
5270
5271		/* Configure rx_mode of FCoE Queue */
5272		__set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags);
5273#endif
5274
5275	switch (bp->rx_mode) {
5276	case BNX2X_RX_MODE_NONE:
5277		/*
5278		 * 'drop all' supersedes any accept flags that may have been
5279		 * passed to the function.
5280		 */
5281		break;
5282	case BNX2X_RX_MODE_NORMAL:
5283		__set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags);
5284		__set_bit(BNX2X_ACCEPT_MULTICAST, &rx_accept_flags);
5285		__set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags);
5286
5287		/* internal switching mode */
5288		__set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags);
5289		__set_bit(BNX2X_ACCEPT_MULTICAST, &tx_accept_flags);
5290		__set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags);
5291
5292		break;
5293	case BNX2X_RX_MODE_ALLMULTI:
5294		__set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags);
5295		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags);
5296		__set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags);
5297
5298		/* internal switching mode */
5299		__set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags);
5300		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags);
5301		__set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags);
5302
5303		break;
5304	case BNX2X_RX_MODE_PROMISC:
5305		/* According to deffinition of SI mode, iface in promisc mode
5306		 * should receive matched and unmatched (in resolution of port)
5307		 * unicast packets.
5308		 */
5309		__set_bit(BNX2X_ACCEPT_UNMATCHED, &rx_accept_flags);
5310		__set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags);
5311		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags);
5312		__set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags);
5313
5314		/* internal switching mode */
5315		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags);
5316		__set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags);
5317
5318		if (IS_MF_SI(bp))
5319			__set_bit(BNX2X_ACCEPT_ALL_UNICAST, &tx_accept_flags);
5320		else
5321			__set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags);
5322
5323		break;
5324	default:
5325		BNX2X_ERR("Unknown rx_mode: %d\n", bp->rx_mode);
5326		return;
5327	}
5328
5329	if (bp->rx_mode != BNX2X_RX_MODE_NONE) {
5330		__set_bit(BNX2X_ACCEPT_ANY_VLAN, &rx_accept_flags);
5331		__set_bit(BNX2X_ACCEPT_ANY_VLAN, &tx_accept_flags);
5332	}
5333
5334	__set_bit(RAMROD_RX, &ramrod_flags);
5335	__set_bit(RAMROD_TX, &ramrod_flags);
5336
5337	bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, rx_accept_flags,
5338			    tx_accept_flags, ramrod_flags);
5339}
5340
5341static void bnx2x_init_internal_common(struct bnx2x *bp)
5342{
5343	int i;
5344
5345	if (IS_MF_SI(bp))
5346		/*
5347		 * In switch independent mode, the TSTORM needs to accept
5348		 * packets that failed classification, since approximate match
5349		 * mac addresses aren't written to NIG LLH
5350		 */
5351		REG_WR8(bp, BAR_TSTRORM_INTMEM +
5352			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 2);
5353	else if (!CHIP_IS_E1(bp)) /* 57710 doesn't support MF */
5354		REG_WR8(bp, BAR_TSTRORM_INTMEM +
5355			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 0);
5356
5357	/* Zero this manually as its initialization is
5358	   currently missing in the initTool */
5359	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
5360		REG_WR(bp, BAR_USTRORM_INTMEM +
5361		       USTORM_AGG_DATA_OFFSET + i * 4, 0);
5362	if (!CHIP_IS_E1x(bp)) {
5363		REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET,
5364			CHIP_INT_MODE_IS_BC(bp) ?
5365			HC_IGU_BC_MODE : HC_IGU_NBC_MODE);
5366	}
5367}
5368
5369static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
5370{
5371	switch (load_code) {
5372	case FW_MSG_CODE_DRV_LOAD_COMMON:
5373	case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
5374		bnx2x_init_internal_common(bp);
5375		/* no break */
5376
5377	case FW_MSG_CODE_DRV_LOAD_PORT:
5378		/* nothing to do */
5379		/* no break */
5380
5381	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
5382		/* internal memory per function is
5383		   initialized inside bnx2x_pf_init */
5384		break;
5385
5386	default:
5387		BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
5388		break;
5389	}
5390}
5391
5392static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp)
5393{
5394	return fp->bp->igu_base_sb + fp->index + CNIC_PRESENT;
5395}
5396
5397static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp)
5398{
5399	return fp->bp->base_fw_ndsb + fp->index + CNIC_PRESENT;
5400}
5401
5402static inline u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp)
5403{
5404	if (CHIP_IS_E1x(fp->bp))
5405		return BP_L_ID(fp->bp) + fp->index;
5406	else	/* We want Client ID to be the same as IGU SB ID for 57712 */
5407		return bnx2x_fp_igu_sb_id(fp);
5408}
5409
5410static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx)
5411{
5412	struct bnx2x_fastpath *fp = &bp->fp[fp_idx];
5413	u8 cos;
5414	unsigned long q_type = 0;
5415	u32 cids[BNX2X_MULTI_TX_COS] = { 0 };
5416	fp->rx_queue = fp_idx;
5417	fp->cid = fp_idx;
5418	fp->cl_id = bnx2x_fp_cl_id(fp);
5419	fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp);
5420	fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp);
5421	/* qZone id equals to FW (per path) client id */
5422	fp->cl_qzone_id  = bnx2x_fp_qzone_id(fp);
5423
5424	/* init shortcut */
5425	fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp);
5426	/* Setup SB indicies */
5427	fp->rx_cons_sb = BNX2X_RX_SB_INDEX;
5428
5429	/* Configure Queue State object */
5430	__set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
5431	__set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
5432
5433	BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS);
5434
5435	/* init tx data */
5436	for_each_cos_in_tx_queue(fp, cos) {
5437		bnx2x_init_txdata(bp, &fp->txdata[cos],
5438				  CID_COS_TO_TX_ONLY_CID(fp->cid, cos),
5439				  FP_COS_TO_TXQ(fp, cos),
5440				  BNX2X_TX_SB_INDEX_BASE + cos);
5441		cids[cos] = fp->txdata[cos].cid;
5442	}
5443
5444	bnx2x_init_queue_obj(bp, &fp->q_obj, fp->cl_id, cids, fp->max_cos,
5445			     BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
5446			     bnx2x_sp_mapping(bp, q_rdata), q_type);
5447
5448	/**
5449	 * Configure classification DBs: Always enable Tx switching
5450	 */
5451	bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX);
5452
5453	DP(NETIF_MSG_IFUP, "queue[%d]:  bnx2x_init_sb(%p,%p)  "
5454				   "cl_id %d  fw_sb %d  igu_sb %d\n",
5455		   fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
5456		   fp->igu_sb_id);
5457	bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false,
5458		      fp->fw_sb_id, fp->igu_sb_id);
5459
5460	bnx2x_update_fpsb_idx(fp);
5461}
5462
5463void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
5464{
5465	int i;
5466
5467	for_each_eth_queue(bp, i)
5468		bnx2x_init_eth_fp(bp, i);
5469#ifdef BCM_CNIC
5470	if (!NO_FCOE(bp))
5471		bnx2x_init_fcoe_fp(bp);
5472
5473	bnx2x_init_sb(bp, bp->cnic_sb_mapping,
5474		      BNX2X_VF_ID_INVALID, false,
5475		      bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp));
5476
5477#endif
5478
5479	/* Initialize MOD_ABS interrupts */
5480	bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id,
5481			       bp->common.shmem_base, bp->common.shmem2_base,
5482			       BP_PORT(bp));
5483	/* ensure status block indices were read */
5484	rmb();
5485
5486	bnx2x_init_def_sb(bp);
5487	bnx2x_update_dsb_idx(bp);
5488	bnx2x_init_rx_rings(bp);
5489	bnx2x_init_tx_rings(bp);
5490	bnx2x_init_sp_ring(bp);
5491	bnx2x_init_eq_ring(bp);
5492	bnx2x_init_internal(bp, load_code);
5493	bnx2x_pf_init(bp);
5494	bnx2x_stats_init(bp);
5495
5496	/* flush all before enabling interrupts */
5497	mb();
5498	mmiowb();
5499
5500	bnx2x_int_enable(bp);
5501
5502	/* Check for SPIO5 */
5503	bnx2x_attn_int_deasserted0(bp,
5504		REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
5505				   AEU_INPUTS_ATTN_BITS_SPIO5);
5506}
5507
5508/* end of nic init */
5509
5510/*
5511 * gzip service functions
5512 */
5513
5514static int bnx2x_gunzip_init(struct bnx2x *bp)
5515{
5516	bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE,
5517					    &bp->gunzip_mapping, GFP_KERNEL);
5518	if (bp->gunzip_buf  == NULL)
5519		goto gunzip_nomem1;
5520
5521	bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL);
5522	if (bp->strm  == NULL)
5523		goto gunzip_nomem2;
5524
5525	bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
5526	if (bp->strm->workspace == NULL)
5527		goto gunzip_nomem3;
5528
5529	return 0;
5530
5531gunzip_nomem3:
5532	kfree(bp->strm);
5533	bp->strm = NULL;
5534
5535gunzip_nomem2:
5536	dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
5537			  bp->gunzip_mapping);
5538	bp->gunzip_buf = NULL;
5539
5540gunzip_nomem1:
5541	netdev_err(bp->dev, "Cannot allocate firmware buffer for"
5542	       " un-compression\n");
5543	return -ENOMEM;
5544}
5545
5546static void bnx2x_gunzip_end(struct bnx2x *bp)
5547{
5548	if (bp->strm) {
5549		vfree(bp->strm->workspace);
5550		kfree(bp->strm);
5551		bp->strm = NULL;
5552	}
5553
5554	if (bp->gunzip_buf) {
5555		dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
5556				  bp->gunzip_mapping);
5557		bp->gunzip_buf = NULL;
5558	}
5559}
5560
5561static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
5562{
5563	int n, rc;
5564
5565	/* check gzip header */
5566	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
5567		BNX2X_ERR("Bad gzip header\n");
5568		return -EINVAL;
5569	}
5570
5571	n = 10;
5572
5573#define FNAME				0x8
5574
5575	if (zbuf[3] & FNAME)
5576		while ((zbuf[n++] != 0) && (n < len));
5577
5578	bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
5579	bp->strm->avail_in = len - n;
5580	bp->strm->next_out = bp->gunzip_buf;
5581	bp->strm->avail_out = FW_BUF_SIZE;
5582
5583	rc = zlib_inflateInit2(bp->strm, -MAX_WBITS);
5584	if (rc != Z_OK)
5585		return rc;
5586
5587	rc = zlib_inflate(bp->strm, Z_FINISH);
5588	if ((rc != Z_OK) && (rc != Z_STREAM_END))
5589		netdev_err(bp->dev, "Firmware decompression error: %s\n",
5590			   bp->strm->msg);
5591
5592	bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
5593	if (bp->gunzip_outlen & 0x3)
5594		netdev_err(bp->dev, "Firmware decompression error:"
5595				    " gunzip_outlen (%d) not aligned\n",
5596				bp->gunzip_outlen);
5597	bp->gunzip_outlen >>= 2;
5598
5599	zlib_inflateEnd(bp->strm);
5600
5601	if (rc == Z_STREAM_END)
5602		return 0;
5603
5604	return rc;
5605}
5606
5607/* nic load/unload */
5608
5609/*
5610 * General service functions
5611 */
5612
5613/* send a NIG loopback debug packet */
5614static void bnx2x_lb_pckt(struct bnx2x *bp)
5615{
5616	u32 wb_write[3];
5617
5618	/* Ethernet source and destination addresses */
5619	wb_write[0] = 0x55555555;
5620	wb_write[1] = 0x55555555;
5621	wb_write[2] = 0x20;		/* SOP */
5622	REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
5623
5624	/* NON-IP protocol */
5625	wb_write[0] = 0x09000000;
5626	wb_write[1] = 0x55555555;
5627	wb_write[2] = 0x10;		/* EOP, eop_bvalid = 0 */
5628	REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
5629}
5630
5631/* some of the internal memories
5632 * are not directly readable from the driver
5633 * to test them we send debug packets
5634 */
5635static int bnx2x_int_mem_test(struct bnx2x *bp)
5636{
5637	int factor;
5638	int count, i;
5639	u32 val = 0;
5640
5641	if (CHIP_REV_IS_FPGA(bp))
5642		factor = 120;
5643	else if (CHIP_REV_IS_EMUL(bp))
5644		factor = 200;
5645	else
5646		factor = 1;
5647
5648	/* Disable inputs of parser neighbor blocks */
5649	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
5650	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
5651	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
5652	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
5653
5654	/*  Write 0 to parser credits for CFC search request */
5655	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
5656
5657	/* send Ethernet packet */
5658	bnx2x_lb_pckt(bp);
5659
5660	/* TODO do i reset NIG statistic? */
5661	/* Wait until NIG register shows 1 packet of size 0x10 */
5662	count = 1000 * factor;
5663	while (count) {
5664
5665		bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
5666		val = *bnx2x_sp(bp, wb_data[0]);
5667		if (val == 0x10)
5668			break;
5669
5670		msleep(10);
5671		count--;
5672	}
5673	if (val != 0x10) {
5674		BNX2X_ERR("NIG timeout  val = 0x%x\n", val);
5675		return -1;
5676	}
5677
5678	/* Wait until PRS register shows 1 packet */
5679	count = 1000 * factor;
5680	while (count) {
5681		val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
5682		if (val == 1)
5683			break;
5684
5685		msleep(10);
5686		count--;
5687	}
5688	if (val != 0x1) {
5689		BNX2X_ERR("PRS timeout val = 0x%x\n", val);
5690		return -2;
5691	}
5692
5693	/* Reset and init BRB, PRS */
5694	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
5695	msleep(50);
5696	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
5697	msleep(50);
5698	bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
5699	bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
5700
5701	DP(NETIF_MSG_HW, "part2\n");
5702
5703	/* Disable inputs of parser neighbor blocks */
5704	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
5705	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
5706	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
5707	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
5708
5709	/* Write 0 to parser credits for CFC search request */
5710	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
5711
5712	/* send 10 Ethernet packets */
5713	for (i = 0; i < 10; i++)
5714		bnx2x_lb_pckt(bp);
5715
5716	/* Wait until NIG register shows 10 + 1
5717	   packets of size 11*0x10 = 0xb0 */
5718	count = 1000 * factor;
5719	while (count) {
5720
5721		bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
5722		val = *bnx2x_sp(bp, wb_data[0]);
5723		if (val == 0xb0)
5724			break;
5725
5726		msleep(10);
5727		count--;
5728	}
5729	if (val != 0xb0) {
5730		BNX2X_ERR("NIG timeout  val = 0x%x\n", val);
5731		return -3;
5732	}
5733
5734	/* Wait until PRS register shows 2 packets */
5735	val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
5736	if (val != 2)
5737		BNX2X_ERR("PRS timeout  val = 0x%x\n", val);
5738
5739	/* Write 1 to parser credits for CFC search request */
5740	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
5741
5742	/* Wait until PRS register shows 3 packets */
5743	msleep(10 * factor);
5744	/* Wait until NIG register shows 1 packet of size 0x10 */
5745	val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
5746	if (val != 3)
5747		BNX2X_ERR("PRS timeout  val = 0x%x\n", val);
5748
5749	/* clear NIG EOP FIFO */
5750	for (i = 0; i < 11; i++)
5751		REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO);
5752	val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY);
5753	if (val != 1) {
5754		BNX2X_ERR("clear of NIG failed\n");
5755		return -4;
5756	}
5757
5758	/* Reset and init BRB, PRS, NIG */
5759	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
5760	msleep(50);
5761	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
5762	msleep(50);
5763	bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
5764	bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
5765#ifndef BCM_CNIC
5766	/* set NIC mode */
5767	REG_WR(bp, PRS_REG_NIC_MODE, 1);
5768#endif
5769
5770	/* Enable inputs of parser neighbor blocks */
5771	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
5772	REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
5773	REG_WR(bp, CFC_REG_DEBUG0, 0x0);
5774	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
5775
5776	DP(NETIF_MSG_HW, "done\n");
5777
5778	return 0; /* OK */
5779}
5780
5781static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
5782{
5783	REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
5784	if (!CHIP_IS_E1x(bp))
5785		REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40);
5786	else
5787		REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0);
5788	REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
5789	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
5790	/*
5791	 * mask read length error interrupts in brb for parser
5792	 * (parsing unit and 'checksum and crc' unit)
5793	 * these errors are legal (PU reads fixed length and CAC can cause
5794	 * read length error on truncated packets)
5795	 */
5796	REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00);
5797	REG_WR(bp, QM_REG_QM_INT_MASK, 0);
5798	REG_WR(bp, TM_REG_TM_INT_MASK, 0);
5799	REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0);
5800	REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0);
5801	REG_WR(bp, XCM_REG_XCM_INT_MASK, 0);
5802/*	REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
5803/*	REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
5804	REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0);
5805	REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0);
5806	REG_WR(bp, UCM_REG_UCM_INT_MASK, 0);
5807/*	REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
5808/*	REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
5809	REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
5810	REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0);
5811	REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0);
5812	REG_WR(bp, CCM_REG_CCM_INT_MASK, 0);
5813/*	REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
5814/*	REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
5815
5816	if (CHIP_REV_IS_FPGA(bp))
5817		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x580000);
5818	else if (!CHIP_IS_E1x(bp))
5819		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0,
5820			   (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF
5821				| PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT
5822				| PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN
5823				| PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED
5824				| PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED));
5825	else
5826		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x480000);
5827	REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0);
5828	REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0);
5829	REG_WR(bp, TCM_REG_TCM_INT_MASK, 0);
5830/*	REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
5831
5832	if (!CHIP_IS_E1x(bp))
5833		/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
5834		REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
5835
5836	REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
5837	REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
5838/*	REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
5839	REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18);		/* bit 3,4 masked */
5840}
5841
5842static void bnx2x_reset_common(struct bnx2x *bp)
5843{
5844	u32 val = 0x1400;
5845
5846	/* reset_common */
5847	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
5848	       0xd3ffff7f);
5849
5850	if (CHIP_IS_E3(bp)) {
5851		val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
5852		val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
5853	}
5854
5855	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val);
5856}
5857
5858static void bnx2x_setup_dmae(struct bnx2x *bp)
5859{
5860	bp->dmae_ready = 0;
5861	spin_lock_init(&bp->dmae_lock);
5862}
5863
5864static void bnx2x_init_pxp(struct bnx2x *bp)
5865{
5866	u16 devctl;
5867	int r_order, w_order;
5868
5869	pci_read_config_word(bp->pdev,
5870			     pci_pcie_cap(bp->pdev) + PCI_EXP_DEVCTL, &devctl);
5871	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
5872	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
5873	if (bp->mrrs == -1)
5874		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
5875	else {
5876		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
5877		r_order = bp->mrrs;
5878	}
5879
5880	bnx2x_init_pxp_arb(bp, r_order, w_order);
5881}
5882
5883static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
5884{
5885	int is_required;
5886	u32 val;
5887	int port;
5888
5889	if (BP_NOMCP(bp))
5890		return;
5891
5892	is_required = 0;
5893	val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
5894	      SHARED_HW_CFG_FAN_FAILURE_MASK;
5895
5896	if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
5897		is_required = 1;
5898
5899	/*
5900	 * The fan failure mechanism is usually related to the PHY type since
5901	 * the power consumption of the board is affected by the PHY. Currently,
5902	 * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
5903	 */
5904	else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
5905		for (port = PORT_0; port < PORT_MAX; port++) {
5906			is_required |=
5907				bnx2x_fan_failure_det_req(
5908					bp,
5909					bp->common.shmem_base,
5910					bp->common.shmem2_base,
5911					port);
5912		}
5913
5914	DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
5915
5916	if (is_required == 0)
5917		return;
5918
5919	/* Fan failure is indicated by SPIO 5 */
5920	bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
5921		       MISC_REGISTERS_SPIO_INPUT_HI_Z);
5922
5923	/* set to active low mode */
5924	val = REG_RD(bp, MISC_REG_SPIO_INT);
5925	val |= ((1 << MISC_REGISTERS_SPIO_5) <<
5926					MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
5927	REG_WR(bp, MISC_REG_SPIO_INT, val);
5928
5929	/* enable interrupt to signal the IGU */
5930	val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
5931	val |= (1 << MISC_REGISTERS_SPIO_5);
5932	REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
5933}
5934
5935static void bnx2x_pretend_func(struct bnx2x *bp, u8 pretend_func_num)
5936{
5937	u32 offset = 0;
5938
5939	if (CHIP_IS_E1(bp))
5940		return;
5941	if (CHIP_IS_E1H(bp) && (pretend_func_num >= E1H_FUNC_MAX))
5942		return;
5943
5944	switch (BP_ABS_FUNC(bp)) {
5945	case 0:
5946		offset = PXP2_REG_PGL_PRETEND_FUNC_F0;
5947		break;
5948	case 1:
5949		offset = PXP2_REG_PGL_PRETEND_FUNC_F1;
5950		break;
5951	case 2:
5952		offset = PXP2_REG_PGL_PRETEND_FUNC_F2;
5953		break;
5954	case 3:
5955		offset = PXP2_REG_PGL_PRETEND_FUNC_F3;
5956		break;
5957	case 4:
5958		offset = PXP2_REG_PGL_PRETEND_FUNC_F4;
5959		break;
5960	case 5:
5961		offset = PXP2_REG_PGL_PRETEND_FUNC_F5;
5962		break;
5963	case 6:
5964		offset = PXP2_REG_PGL_PRETEND_FUNC_F6;
5965		break;
5966	case 7:
5967		offset = PXP2_REG_PGL_PRETEND_FUNC_F7;
5968		break;
5969	default:
5970		return;
5971	}
5972
5973	REG_WR(bp, offset, pretend_func_num);
5974	REG_RD(bp, offset);
5975	DP(NETIF_MSG_HW, "Pretending to func %d\n", pretend_func_num);
5976}
5977
5978void bnx2x_pf_disable(struct bnx2x *bp)
5979{
5980	u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
5981	val &= ~IGU_PF_CONF_FUNC_EN;
5982
5983	REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
5984	REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
5985	REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0);
5986}
5987
5988static inline void bnx2x__common_init_phy(struct bnx2x *bp)
5989{
5990	u32 shmem_base[2], shmem2_base[2];
5991	shmem_base[0] =  bp->common.shmem_base;
5992	shmem2_base[0] = bp->common.shmem2_base;
5993	if (!CHIP_IS_E1x(bp)) {
5994		shmem_base[1] =
5995			SHMEM2_RD(bp, other_shmem_base_addr);
5996		shmem2_base[1] =
5997			SHMEM2_RD(bp, other_shmem2_base_addr);
5998	}
5999	bnx2x_acquire_phy_lock(bp);
6000	bnx2x_common_init_phy(bp, shmem_base, shmem2_base,
6001			      bp->common.chip_id);
6002	bnx2x_release_phy_lock(bp);
6003}
6004
6005/**
6006 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
6007 *
6008 * @bp:		driver handle
6009 */
6010static int bnx2x_init_hw_common(struct bnx2x *bp)
6011{
6012	u32 val;
6013
6014	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_ABS_FUNC(bp));
6015
6016	/*
6017	 * take the UNDI lock to protect undi_unload flow from accessing
6018	 * registers while we're resetting the chip
6019	 */
6020	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
6021
6022	bnx2x_reset_common(bp);
6023	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
6024
6025	val = 0xfffc;
6026	if (CHIP_IS_E3(bp)) {
6027		val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
6028		val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
6029	}
6030	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
6031
6032	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
6033
6034	bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
6035
6036	if (!CHIP_IS_E1x(bp)) {
6037		u8 abs_func_id;
6038
6039		/**
6040		 * 4-port mode or 2-port mode we need to turn of master-enable
6041		 * for everyone, after that, turn it back on for self.
6042		 * so, we disregard multi-function or not, and always disable
6043		 * for all functions on the given path, this means 0,2,4,6 for
6044		 * path 0 and 1,3,5,7 for path 1
6045		 */
6046		for (abs_func_id = BP_PATH(bp);
6047		     abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) {
6048			if (abs_func_id == BP_ABS_FUNC(bp)) {
6049				REG_WR(bp,
6050				    PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
6051				    1);
6052				continue;
6053			}
6054
6055			bnx2x_pretend_func(bp, abs_func_id);
6056			/* clear pf enable */
6057			bnx2x_pf_disable(bp);
6058			bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
6059		}
6060	}
6061
6062	bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON);
6063	if (CHIP_IS_E1(bp)) {
6064		/* enable HW interrupt from PXP on USDM overflow
6065		   bit 16 on INT_MASK_0 */
6066		REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
6067	}
6068
6069	bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON);
6070	bnx2x_init_pxp(bp);
6071
6072#ifdef __BIG_ENDIAN
6073	REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, 1);
6074	REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, 1);
6075	REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
6076	REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
6077	REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
6078	/* make sure this value is 0 */
6079	REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0);
6080
6081/*	REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
6082	REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
6083	REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, 1);
6084	REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, 1);
6085	REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
6086#endif
6087
6088	bnx2x_ilt_init_page_size(bp, INITOP_SET);
6089
6090	if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp))
6091		REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
6092
6093	/* let the HW do it's magic ... */
6094	msleep(100);
6095	/* finish PXP init */
6096	val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE);
6097	if (val != 1) {
6098		BNX2X_ERR("PXP2 CFG failed\n");
6099		return -EBUSY;
6100	}
6101	val = REG_RD(bp, PXP2_REG_RD_INIT_DONE);
6102	if (val != 1) {
6103		BNX2X_ERR("PXP2 RD_INIT failed\n");
6104		return -EBUSY;
6105	}
6106
6107	/* Timers bug workaround E2 only. We need to set the entire ILT to
6108	 * have entries with value "0" and valid bit on.
6109	 * This needs to be done by the first PF that is loaded in a path
6110	 * (i.e. common phase)
6111	 */
6112	if (!CHIP_IS_E1x(bp)) {
6113/* In E2 there is a bug in the timers block that can cause function 6 / 7
6114 * (i.e. vnic3) to start even if it is marked as "scan-off".
6115 * This occurs when a different function (func2,3) is being marked
6116 * as "scan-off". Real-life scenario for example: if a driver is being
6117 * load-unloaded while func6,7 are down. This will cause the timer to access
6118 * the ilt, translate to a logical address and send a request to read/write.
6119 * Since the ilt for the function that is down is not valid, this will cause
6120 * a translation error which is unrecoverable.
6121 * The Workaround is intended to make sure that when this happens nothing fatal
6122 * will occur. The workaround:
6123 *	1.  First PF driver which loads on a path will:
6124 *		a.  After taking the chip out of reset, by using pretend,
6125 *		    it will write "0" to the following registers of
6126 *		    the other vnics.
6127 *		    REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
6128 *		    REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
6129 *		    REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
6130 *		    And for itself it will write '1' to
6131 *		    PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
6132 *		    dmae-operations (writing to pram for example.)
6133 *		    note: can be done for only function 6,7 but cleaner this
6134 *			  way.
6135 *		b.  Write zero+valid to the entire ILT.
6136 *		c.  Init the first_timers_ilt_entry, last_timers_ilt_entry of
6137 *		    VNIC3 (of that port). The range allocated will be the
6138 *		    entire ILT. This is needed to prevent  ILT range error.
6139 *	2.  Any PF driver load flow:
6140 *		a.  ILT update with the physical addresses of the allocated
6141 *		    logical pages.
6142 *		b.  Wait 20msec. - note that this timeout is needed to make
6143 *		    sure there are no requests in one of the PXP internal
6144 *		    queues with "old" ILT addresses.
6145 *		c.  PF enable in the PGLC.
6146 *		d.  Clear the was_error of the PF in the PGLC. (could have
6147 *		    occured while driver was down)
6148 *		e.  PF enable in the CFC (WEAK + STRONG)
6149 *		f.  Timers scan enable
6150 *	3.  PF driver unload flow:
6151 *		a.  Clear the Timers scan_en.
6152 *		b.  Polling for scan_on=0 for that PF.
6153 *		c.  Clear the PF enable bit in the PXP.
6154 *		d.  Clear the PF enable in the CFC (WEAK + STRONG)
6155 *		e.  Write zero+valid to all ILT entries (The valid bit must
6156 *		    stay set)
6157 *		f.  If this is VNIC 3 of a port then also init
6158 *		    first_timers_ilt_entry to zero and last_timers_ilt_entry
6159 *		    to the last enrty in the ILT.
6160 *
6161 *	Notes:
6162 *	Currently the PF error in the PGLC is non recoverable.
6163 *	In the future the there will be a recovery routine for this error.
6164 *	Currently attention is masked.
6165 *	Having an MCP lock on the load/unload process does not guarantee that
6166 *	there is no Timer disable during Func6/7 enable. This is because the
6167 *	Timers scan is currently being cleared by the MCP on FLR.
6168 *	Step 2.d can be done only for PF6/7 and the driver can also check if
6169 *	there is error before clearing it. But the flow above is simpler and
6170 *	more general.
6171 *	All ILT entries are written by zero+valid and not just PF6/7
6172 *	ILT entries since in the future the ILT entries allocation for
6173 *	PF-s might be dynamic.
6174 */
6175		struct ilt_client_info ilt_cli;
6176		struct bnx2x_ilt ilt;
6177		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
6178		memset(&ilt, 0, sizeof(struct bnx2x_ilt));
6179
6180		/* initialize dummy TM client */
6181		ilt_cli.start = 0;
6182		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
6183		ilt_cli.client_num = ILT_CLIENT_TM;
6184
6185		/* Step 1: set zeroes to all ilt page entries with valid bit on
6186		 * Step 2: set the timers first/last ilt entry to point
6187		 * to the entire range to prevent ILT range error for 3rd/4th
6188		 * vnic	(this code assumes existance of the vnic)
6189		 *
6190		 * both steps performed by call to bnx2x_ilt_client_init_op()
6191		 * with dummy TM client
6192		 *
6193		 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
6194		 * and his brother are split registers
6195		 */
6196		bnx2x_pretend_func(bp, (BP_PATH(bp) + 6));
6197		bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR);
6198		bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
6199
6200		REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
6201		REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
6202		REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
6203	}
6204
6205
6206	REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
6207	REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
6208
6209	if (!CHIP_IS_E1x(bp)) {
6210		int factor = CHIP_REV_IS_EMUL(bp) ? 1000 :
6211				(CHIP_REV_IS_FPGA(bp) ? 400 : 0);
6212		bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON);
6213
6214		bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON);
6215
6216		/* let the HW do it's magic ... */
6217		do {
6218			msleep(200);
6219			val = REG_RD(bp, ATC_REG_ATC_INIT_DONE);
6220		} while (factor-- && (val != 1));
6221
6222		if (val != 1) {
6223			BNX2X_ERR("ATC_INIT failed\n");
6224			return -EBUSY;
6225		}
6226	}
6227
6228	bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON);
6229
6230	/* clean the DMAE memory */
6231	bp->dmae_ready = 1;
6232	bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1);
6233
6234	bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON);
6235
6236	bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON);
6237
6238	bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON);
6239
6240	bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON);
6241
6242	bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
6243	bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
6244	bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
6245	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
6246
6247	bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON);
6248
6249
6250	/* QM queues pointers table */
6251	bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET);
6252
6253	/* soft reset pulse */
6254	REG_WR(bp, QM_REG_SOFT_RESET, 1);
6255	REG_WR(bp, QM_REG_SOFT_RESET, 0);
6256
6257#ifdef BCM_CNIC
6258	bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON);
6259#endif
6260
6261	bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON);
6262	REG_WR(bp, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT);
6263	if (!CHIP_REV_IS_SLOW(bp))
6264		/* enable hw interrupt from doorbell Q */
6265		REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
6266
6267	bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
6268
6269	bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
6270	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
6271
6272	if (!CHIP_IS_E1(bp))
6273		REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan);
6274
6275	if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp))
6276		/* Bit-map indicating which L2 hdrs may appear
6277		 * after the basic Ethernet header
6278		 */
6279		REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC,
6280		       bp->path_has_ovlan ? 7 : 6);
6281
6282	bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON);
6283	bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON);
6284	bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON);
6285	bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON);
6286
6287	if (!CHIP_IS_E1x(bp)) {
6288		/* reset VFC memories */
6289		REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
6290			   VFC_MEMORIES_RST_REG_CAM_RST |
6291			   VFC_MEMORIES_RST_REG_RAM_RST);
6292		REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
6293			   VFC_MEMORIES_RST_REG_CAM_RST |
6294			   VFC_MEMORIES_RST_REG_RAM_RST);
6295
6296		msleep(20);
6297	}
6298
6299	bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON);
6300	bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON);
6301	bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON);
6302	bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON);
6303
6304	/* sync semi rtc */
6305	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
6306	       0x80000000);
6307	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
6308	       0x80000000);
6309
6310	bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON);
6311	bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON);
6312	bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON);
6313
6314	if (!CHIP_IS_E1x(bp))
6315		REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC,
6316		       bp->path_has_ovlan ? 7 : 6);
6317
6318	REG_WR(bp, SRC_REG_SOFT_RST, 1);
6319
6320	bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON);
6321
6322#ifdef BCM_CNIC
6323	REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
6324	REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
6325	REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
6326	REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
6327	REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
6328	REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
6329	REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
6330	REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
6331	REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
6332	REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
6333#endif
6334	REG_WR(bp, SRC_REG_SOFT_RST, 0);
6335
6336	if (sizeof(union cdu_context) != 1024)
6337		/* we currently assume that a context is 1024 bytes */
6338		dev_alert(&bp->pdev->dev, "please adjust the size "
6339					  "of cdu_context(%ld)\n",
6340			 (long)sizeof(union cdu_context));
6341
6342	bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON);
6343	val = (4 << 24) + (0 << 12) + 1024;
6344	REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
6345
6346	bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON);
6347	REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
6348	/* enable context validation interrupt from CFC */
6349	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
6350
6351	/* set the thresholds to prevent CFC/CDU race */
6352	REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
6353
6354	bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON);
6355
6356	if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp))
6357		REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36);
6358
6359	bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON);
6360	bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON);
6361
6362	/* Reset PCIE errors for debug */
6363	REG_WR(bp, 0x2814, 0xffffffff);
6364	REG_WR(bp, 0x3820, 0xffffffff);
6365
6366	if (!CHIP_IS_E1x(bp)) {
6367		REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
6368			   (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
6369				PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
6370		REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
6371			   (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
6372				PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
6373				PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
6374		REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
6375			   (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
6376				PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
6377				PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
6378	}
6379
6380	bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON);
6381	if (!CHIP_IS_E1(bp)) {
6382		/* in E3 this done in per-port section */
6383		if (!CHIP_IS_E3(bp))
6384			REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp));
6385	}
6386	if (CHIP_IS_E1H(bp))
6387		/* not applicable for E2 (and above ...) */
6388		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp));
6389
6390	if (CHIP_REV_IS_SLOW(bp))
6391		msleep(200);
6392
6393	/* finish CFC init */
6394	val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10);
6395	if (val != 1) {
6396		BNX2X_ERR("CFC LL_INIT failed\n");
6397		return -EBUSY;
6398	}
6399	val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10);
6400	if (val != 1) {
6401		BNX2X_ERR("CFC AC_INIT failed\n");
6402		return -EBUSY;
6403	}
6404	val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
6405	if (val != 1) {
6406		BNX2X_ERR("CFC CAM_INIT failed\n");
6407		return -EBUSY;
6408	}
6409	REG_WR(bp, CFC_REG_DEBUG0, 0);
6410
6411	if (CHIP_IS_E1(bp)) {
6412		/* read NIG statistic
6413		   to see if this is our first up since powerup */
6414		bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
6415		val = *bnx2x_sp(bp, wb_data[0]);
6416
6417		/* do internal memory self test */
6418		if ((val == 0) && bnx2x_int_mem_test(bp)) {
6419			BNX2X_ERR("internal mem self test failed\n");
6420			return -EBUSY;
6421		}
6422	}
6423
6424	bnx2x_setup_fan_failure_detection(bp);
6425
6426	/* clear PXP2 attentions */
6427	REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
6428
6429	bnx2x_enable_blocks_attention(bp);
6430	bnx2x_enable_blocks_parity(bp);
6431
6432	if (!BP_NOMCP(bp)) {
6433		if (CHIP_IS_E1x(bp))
6434			bnx2x__common_init_phy(bp);
6435	} else
6436		BNX2X_ERR("Bootcode is missing - can not initialize link\n");
6437
6438	return 0;
6439}
6440
6441/**
6442 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
6443 *
6444 * @bp:		driver handle
6445 */
6446static int bnx2x_init_hw_common_chip(struct bnx2x *bp)
6447{
6448	int rc = bnx2x_init_hw_common(bp);
6449
6450	if (rc)
6451		return rc;
6452
6453	/* In E2 2-PORT mode, same ext phy is used for the two paths */
6454	if (!BP_NOMCP(bp))
6455		bnx2x__common_init_phy(bp);
6456
6457	return 0;
6458}
6459
6460static int bnx2x_init_hw_port(struct bnx2x *bp)
6461{
6462	int port = BP_PORT(bp);
6463	int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
6464	u32 low, high;
6465	u32 val;
6466
6467	bnx2x__link_reset(bp);
6468
6469	DP(BNX2X_MSG_MCP, "starting port init  port %d\n", port);
6470
6471	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
6472
6473	bnx2x_init_block(bp, BLOCK_MISC, init_phase);
6474	bnx2x_init_block(bp, BLOCK_PXP, init_phase);
6475	bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
6476
6477	/* Timers bug workaround: disables the pf_master bit in pglue at
6478	 * common phase, we need to enable it here before any dmae access are
6479	 * attempted. Therefore we manually added the enable-master to the
6480	 * port phase (it also happens in the function phase)
6481	 */
6482	if (!CHIP_IS_E1x(bp))
6483		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
6484
6485	bnx2x_init_block(bp, BLOCK_ATC, init_phase);
6486	bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
6487	bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
6488	bnx2x_init_block(bp, BLOCK_QM, init_phase);
6489
6490	bnx2x_init_block(bp, BLOCK_TCM, init_phase);
6491	bnx2x_init_block(bp, BLOCK_UCM, init_phase);
6492	bnx2x_init_block(bp, BLOCK_CCM, init_phase);
6493	bnx2x_init_block(bp, BLOCK_XCM, init_phase);
6494
6495	/* QM cid (connection) count */
6496	bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET);
6497
6498#ifdef BCM_CNIC
6499	bnx2x_init_block(bp, BLOCK_TM, init_phase);
6500	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
6501	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
6502#endif
6503
6504	bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
6505
6506	if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
6507		bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
6508
6509		if (IS_MF(bp))
6510			low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
6511		else if (bp->dev->mtu > 4096) {
6512			if (bp->flags & ONE_PORT_FLAG)
6513				low = 160;
6514			else {
6515				val = bp->dev->mtu;
6516				/* (24*1024 + val*4)/256 */
6517				low = 96 + (val/64) +
6518						((val % 64) ? 1 : 0);
6519			}
6520		} else
6521			low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160);
6522		high = low + 56;	/* 14*1024/256 */
6523		REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low);
6524		REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
6525	}
6526
6527	if (CHIP_MODE_IS_4_PORT(bp))
6528		REG_WR(bp, (BP_PORT(bp) ?
6529			    BRB1_REG_MAC_GUARANTIED_1 :
6530			    BRB1_REG_MAC_GUARANTIED_0), 40);
6531
6532
6533	bnx2x_init_block(bp, BLOCK_PRS, init_phase);
6534	if (CHIP_IS_E3B0(bp))
6535		/* Ovlan exists only if we are in multi-function +
6536		 * switch-dependent mode, in switch-independent there
6537		 * is no ovlan headers
6538		 */
6539		REG_WR(bp, BP_PORT(bp) ?
6540		       PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
6541		       PRS_REG_HDRS_AFTER_BASIC_PORT_0,
6542		       (bp->path_has_ovlan ? 7 : 6));
6543
6544	bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
6545	bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
6546	bnx2x_init_block(bp, BLOCK_USDM, init_phase);
6547	bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
6548
6549	bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
6550	bnx2x_init_block(bp, BLOCK_USEM, init_phase);
6551	bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
6552	bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
6553
6554	bnx2x_init_block(bp, BLOCK_UPB, init_phase);
6555	bnx2x_init_block(bp, BLOCK_XPB, init_phase);
6556
6557	bnx2x_init_block(bp, BLOCK_PBF, init_phase);
6558
6559	if (CHIP_IS_E1x(bp)) {
6560		/* configure PBF to work without PAUSE mtu 9000 */
6561		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
6562
6563		/* update threshold */
6564		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16));
6565		/* update init credit */
6566		REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22);
6567
6568		/* probe changes */
6569		REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1);
6570		udelay(50);
6571		REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
6572	}
6573
6574#ifdef BCM_CNIC
6575	bnx2x_init_block(bp, BLOCK_SRC, init_phase);
6576#endif
6577	bnx2x_init_block(bp, BLOCK_CDU, init_phase);
6578	bnx2x_init_block(bp, BLOCK_CFC, init_phase);
6579
6580	if (CHIP_IS_E1(bp)) {
6581		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
6582		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
6583	}
6584	bnx2x_init_block(bp, BLOCK_HC, init_phase);
6585
6586	bnx2x_init_block(bp, BLOCK_IGU, init_phase);
6587
6588	bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
6589	/* init aeu_mask_attn_func_0/1:
6590	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
6591	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
6592	 *             bits 4-7 are used for "per vn group attention" */
6593	val = IS_MF(bp) ? 0xF7 : 0x7;
6594	/* Enable DCBX attention for all but E1 */
6595	val |= CHIP_IS_E1(bp) ? 0 : 0x10;
6596	REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
6597
6598	bnx2x_init_block(bp, BLOCK_NIG, init_phase);
6599
6600	if (!CHIP_IS_E1x(bp)) {
6601		/* Bit-map indicating which L2 hdrs may appear after the
6602		 * basic Ethernet header
6603		 */
6604		REG_WR(bp, BP_PORT(bp) ?
6605			   NIG_REG_P1_HDRS_AFTER_BASIC :
6606			   NIG_REG_P0_HDRS_AFTER_BASIC,
6607			   IS_MF_SD(bp) ? 7 : 6);
6608
6609		if (CHIP_IS_E3(bp))
6610			REG_WR(bp, BP_PORT(bp) ?
6611				   NIG_REG_LLH1_MF_MODE :
6612				   NIG_REG_LLH_MF_MODE, IS_MF(bp));
6613	}
6614	if (!CHIP_IS_E3(bp))
6615		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
6616
6617	if (!CHIP_IS_E1(bp)) {
6618		/* 0x2 disable mf_ov, 0x1 enable */
6619		REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
6620		       (IS_MF_SD(bp) ? 0x1 : 0x2));
6621
6622		if (!CHIP_IS_E1x(bp)) {
6623			val = 0;
6624			switch (bp->mf_mode) {
6625			case MULTI_FUNCTION_SD:
6626				val = 1;
6627				break;
6628			case MULTI_FUNCTION_SI:
6629				val = 2;
6630				break;
6631			}
6632
6633			REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE :
6634						  NIG_REG_LLH0_CLS_TYPE), val);
6635		}
6636		{
6637			REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
6638			REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
6639			REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1);
6640		}
6641	}
6642
6643
6644	/* If SPIO5 is set to generate interrupts, enable it for this port */
6645	val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
6646	if (val & (1 << MISC_REGISTERS_SPIO_5)) {
6647		u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
6648				       MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
6649		val = REG_RD(bp, reg_addr);
6650		val |= AEU_INPUTS_ATTN_BITS_SPIO5;
6651		REG_WR(bp, reg_addr, val);
6652	}
6653
6654	return 0;
6655}
6656
6657static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
6658{
6659	int reg;
6660
6661	if (CHIP_IS_E1(bp))
6662		reg = PXP2_REG_RQ_ONCHIP_AT + index*8;
6663	else
6664		reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8;
6665
6666	bnx2x_wb_wr(bp, reg, ONCHIP_ADDR1(addr), ONCHIP_ADDR2(addr));
6667}
6668
6669static inline void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id)
6670{
6671	bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/);
6672}
6673
6674static inline void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func)
6675{
6676	u32 i, base = FUNC_ILT_BASE(func);
6677	for (i = base; i < base + ILT_PER_FUNC; i++)
6678		bnx2x_ilt_wr(bp, i, 0);
6679}
6680
6681static int bnx2x_init_hw_func(struct bnx2x *bp)
6682{
6683	int port = BP_PORT(bp);
6684	int func = BP_FUNC(bp);
6685	int init_phase = PHASE_PF0 + func;
6686	struct bnx2x_ilt *ilt = BP_ILT(bp);
6687	u16 cdu_ilt_start;
6688	u32 addr, val;
6689	u32 main_mem_base, main_mem_size, main_mem_prty_clr;
6690	int i, main_mem_width;
6691
6692	DP(BNX2X_MSG_MCP, "starting func init  func %d\n", func);
6693
6694	/* FLR cleanup - hmmm */
6695	if (!CHIP_IS_E1x(bp))
6696		bnx2x_pf_flr_clnup(bp);
6697
6698	/* set MSI reconfigure capability */
6699	if (bp->common.int_block == INT_BLOCK_HC) {
6700		addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
6701		val = REG_RD(bp, addr);
6702		val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
6703		REG_WR(bp, addr, val);
6704	}
6705
6706	bnx2x_init_block(bp, BLOCK_PXP, init_phase);
6707	bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
6708
6709	ilt = BP_ILT(bp);
6710	cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
6711
6712	for (i = 0; i < L2_ILT_LINES(bp); i++) {
6713		ilt->lines[cdu_ilt_start + i].page =
6714			bp->context.vcxt + (ILT_PAGE_CIDS * i);
6715		ilt->lines[cdu_ilt_start + i].page_mapping =
6716			bp->context.cxt_mapping + (CDU_ILT_PAGE_SZ * i);
6717		/* cdu ilt pages are allocated manually so there's no need to
6718		set the size */
6719	}
6720	bnx2x_ilt_init_op(bp, INITOP_SET);
6721
6722#ifdef BCM_CNIC
6723	bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM);
6724
6725	/* T1 hash bits value determines the T1 number of entries */
6726	REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS);
6727#endif
6728
6729#ifndef BCM_CNIC
6730	/* set NIC mode */
6731	REG_WR(bp, PRS_REG_NIC_MODE, 1);
6732#endif  /* BCM_CNIC */
6733
6734	if (!CHIP_IS_E1x(bp)) {
6735		u32 pf_conf = IGU_PF_CONF_FUNC_EN;
6736
6737		/* Turn on a single ISR mode in IGU if driver is going to use
6738		 * INT#x or MSI
6739		 */
6740		if (!(bp->flags & USING_MSIX_FLAG))
6741			pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
6742		/*
6743		 * Timers workaround bug: function init part.
6744		 * Need to wait 20msec after initializing ILT,
6745		 * needed to make sure there are no requests in
6746		 * one of the PXP internal queues with "old" ILT addresses
6747		 */
6748		msleep(20);
6749		/*
6750		 * Master enable - Due to WB DMAE writes performed before this
6751		 * register is re-initialized as part of the regular function
6752		 * init
6753		 */
6754		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
6755		/* Enable the function in IGU */
6756		REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf);
6757	}
6758
6759	bp->dmae_ready = 1;
6760
6761	bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
6762
6763	if (!CHIP_IS_E1x(bp))
6764		REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
6765
6766	bnx2x_init_block(bp, BLOCK_ATC, init_phase);
6767	bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
6768	bnx2x_init_block(bp, BLOCK_NIG, init_phase);
6769	bnx2x_init_block(bp, BLOCK_SRC, init_phase);
6770	bnx2x_init_block(bp, BLOCK_MISC, init_phase);
6771	bnx2x_init_block(bp, BLOCK_TCM, init_phase);
6772	bnx2x_init_block(bp, BLOCK_UCM, init_phase);
6773	bnx2x_init_block(bp, BLOCK_CCM, init_phase);
6774	bnx2x_init_block(bp, BLOCK_XCM, init_phase);
6775	bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
6776	bnx2x_init_block(bp, BLOCK_USEM, init_phase);
6777	bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
6778	bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
6779
6780	if (!CHIP_IS_E1x(bp))
6781		REG_WR(bp, QM_REG_PF_EN, 1);
6782
6783	if (!CHIP_IS_E1x(bp)) {
6784		REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
6785		REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
6786		REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
6787		REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
6788	}
6789	bnx2x_init_block(bp, BLOCK_QM, init_phase);
6790
6791	bnx2x_init_block(bp, BLOCK_TM, init_phase);
6792	bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
6793	bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
6794	bnx2x_init_block(bp, BLOCK_PRS, init_phase);
6795	bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
6796	bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
6797	bnx2x_init_block(bp, BLOCK_USDM, init_phase);
6798	bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
6799	bnx2x_init_block(bp, BLOCK_UPB, init_phase);
6800	bnx2x_init_block(bp, BLOCK_XPB, init_phase);
6801	bnx2x_init_block(bp, BLOCK_PBF, init_phase);
6802	if (!CHIP_IS_E1x(bp))
6803		REG_WR(bp, PBF_REG_DISABLE_PF, 0);
6804
6805	bnx2x_init_block(bp, BLOCK_CDU, init_phase);
6806
6807	bnx2x_init_block(bp, BLOCK_CFC, init_phase);
6808
6809	if (!CHIP_IS_E1x(bp))
6810		REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1);
6811
6812	if (IS_MF(bp)) {
6813		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
6814		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->mf_ov);
6815	}
6816
6817	bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
6818
6819	/* HC init per function */
6820	if (bp->common.int_block == INT_BLOCK_HC) {
6821		if (CHIP_IS_E1H(bp)) {
6822			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
6823
6824			REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
6825			REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
6826		}
6827		bnx2x_init_block(bp, BLOCK_HC, init_phase);
6828
6829	} else {
6830		int num_segs, sb_idx, prod_offset;
6831
6832		REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
6833
6834		if (!CHIP_IS_E1x(bp)) {
6835			REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
6836			REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
6837		}
6838
6839		bnx2x_init_block(bp, BLOCK_IGU, init_phase);
6840
6841		if (!CHIP_IS_E1x(bp)) {
6842			int dsb_idx = 0;
6843			/**
6844			 * Producer memory:
6845			 * E2 mode: address 0-135 match to the mapping memory;
6846			 * 136 - PF0 default prod; 137 - PF1 default prod;
6847			 * 138 - PF2 default prod; 139 - PF3 default prod;
6848			 * 140 - PF0 attn prod;    141 - PF1 attn prod;
6849			 * 142 - PF2 attn prod;    143 - PF3 attn prod;
6850			 * 144-147 reserved.
6851			 *
6852			 * E1.5 mode - In backward compatible mode;
6853			 * for non default SB; each even line in the memory
6854			 * holds the U producer and each odd line hold
6855			 * the C producer. The first 128 producers are for
6856			 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
6857			 * producers are for the DSB for each PF.
6858			 * Each PF has five segments: (the order inside each
6859			 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
6860			 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
6861			 * 144-147 attn prods;
6862			 */
6863			/* non-default-status-blocks */
6864			num_segs = CHIP_INT_MODE_IS_BC(bp) ?
6865				IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
6866			for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) {
6867				prod_offset = (bp->igu_base_sb + sb_idx) *
6868					num_segs;
6869
6870				for (i = 0; i < num_segs; i++) {
6871					addr = IGU_REG_PROD_CONS_MEMORY +
6872							(prod_offset + i) * 4;
6873					REG_WR(bp, addr, 0);
6874				}
6875				/* send consumer update with value 0 */
6876				bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx,
6877					     USTORM_ID, 0, IGU_INT_NOP, 1);
6878				bnx2x_igu_clear_sb(bp,
6879						   bp->igu_base_sb + sb_idx);
6880			}
6881
6882			/* default-status-blocks */
6883			num_segs = CHIP_INT_MODE_IS_BC(bp) ?
6884				IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
6885
6886			if (CHIP_MODE_IS_4_PORT(bp))
6887				dsb_idx = BP_FUNC(bp);
6888			else
6889				dsb_idx = BP_VN(bp);
6890
6891			prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
6892				       IGU_BC_BASE_DSB_PROD + dsb_idx :
6893				       IGU_NORM_BASE_DSB_PROD + dsb_idx);
6894
6895			/*
6896			 * igu prods come in chunks of E1HVN_MAX (4) -
6897			 * does not matters what is the current chip mode
6898			 */
6899			for (i = 0; i < (num_segs * E1HVN_MAX);
6900			     i += E1HVN_MAX) {
6901				addr = IGU_REG_PROD_CONS_MEMORY +
6902							(prod_offset + i)*4;
6903				REG_WR(bp, addr, 0);
6904			}
6905			/* send consumer update with 0 */
6906			if (CHIP_INT_MODE_IS_BC(bp)) {
6907				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6908					     USTORM_ID, 0, IGU_INT_NOP, 1);
6909				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6910					     CSTORM_ID, 0, IGU_INT_NOP, 1);
6911				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6912					     XSTORM_ID, 0, IGU_INT_NOP, 1);
6913				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6914					     TSTORM_ID, 0, IGU_INT_NOP, 1);
6915				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6916					     ATTENTION_ID, 0, IGU_INT_NOP, 1);
6917			} else {
6918				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6919					     USTORM_ID, 0, IGU_INT_NOP, 1);
6920				bnx2x_ack_sb(bp, bp->igu_dsb_id,
6921					     ATTENTION_ID, 0, IGU_INT_NOP, 1);
6922			}
6923			bnx2x_igu_clear_sb(bp, bp->igu_dsb_id);
6924
6925			/* !!! these should become driver const once
6926			   rf-tool supports split-68 const */
6927			REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
6928			REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
6929			REG_WR(bp, IGU_REG_SB_MASK_LSB, 0);
6930			REG_WR(bp, IGU_REG_SB_MASK_MSB, 0);
6931			REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0);
6932			REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0);
6933		}
6934	}
6935
6936	/* Reset PCIE errors for debug */
6937	REG_WR(bp, 0x2114, 0xffffffff);
6938	REG_WR(bp, 0x2120, 0xffffffff);
6939
6940	if (CHIP_IS_E1x(bp)) {
6941		main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/
6942		main_mem_base = HC_REG_MAIN_MEMORY +
6943				BP_PORT(bp) * (main_mem_size * 4);
6944		main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
6945		main_mem_width = 8;
6946
6947		val = REG_RD(bp, main_mem_prty_clr);
6948		if (val)
6949			DP(BNX2X_MSG_MCP, "Hmmm... Parity errors in HC "
6950					  "block during "
6951					  "function init (0x%x)!\n", val);
6952
6953		/* Clear "false" parity errors in MSI-X table */
6954		for (i = main_mem_base;
6955		     i < main_mem_base + main_mem_size * 4;
6956		     i += main_mem_width) {
6957			bnx2x_read_dmae(bp, i, main_mem_width / 4);
6958			bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data),
6959					 i, main_mem_width / 4);
6960		}
6961		/* Clear HC parity attention */
6962		REG_RD(bp, main_mem_prty_clr);
6963	}
6964
6965#ifdef BNX2X_STOP_ON_ERROR
6966	/* Enable STORMs SP logging */
6967	REG_WR8(bp, BAR_USTRORM_INTMEM +
6968	       USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
6969	REG_WR8(bp, BAR_TSTRORM_INTMEM +
6970	       TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
6971	REG_WR8(bp, BAR_CSTRORM_INTMEM +
6972	       CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
6973	REG_WR8(bp, BAR_XSTRORM_INTMEM +
6974	       XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
6975#endif
6976
6977	bnx2x_phy_probe(&bp->link_params);
6978
6979	return 0;
6980}
6981
6982
6983void bnx2x_free_mem(struct bnx2x *bp)
6984{
6985	/* fastpath */
6986	bnx2x_free_fp_mem(bp);
6987	/* end of fastpath */
6988
6989	BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
6990		       sizeof(struct host_sp_status_block));
6991
6992	BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
6993		       bp->fw_stats_data_sz + bp->fw_stats_req_sz);
6994
6995	BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
6996		       sizeof(struct bnx2x_slowpath));
6997
6998	BNX2X_PCI_FREE(bp->context.vcxt, bp->context.cxt_mapping,
6999		       bp->context.size);
7000
7001	bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE);
7002
7003	BNX2X_FREE(bp->ilt->lines);
7004
7005#ifdef BCM_CNIC
7006	if (!CHIP_IS_E1x(bp))
7007		BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping,
7008			       sizeof(struct host_hc_status_block_e2));
7009	else
7010		BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping,
7011			       sizeof(struct host_hc_status_block_e1x));
7012
7013	BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ);
7014#endif
7015
7016	BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
7017
7018	BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping,
7019		       BCM_PAGE_SIZE * NUM_EQ_PAGES);
7020}
7021
7022static inline int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp)
7023{
7024	int num_groups;
7025	int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1;
7026
7027	/* number of queues for statistics is number of eth queues + FCoE */
7028	u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe_stats;
7029
7030	/* Total number of FW statistics requests =
7031	 * 1 for port stats + 1 for PF stats + potential 1 for FCoE stats +
7032	 * num of queues
7033	 */
7034	bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats;
7035
7036
7037	/* Request is built from stats_query_header and an array of
7038	 * stats_query_cmd_group each of which contains
7039	 * STATS_QUERY_CMD_COUNT rules. The real number or requests is
7040	 * configured in the stats_query_header.
7041	 */
7042	num_groups = ((bp->fw_stats_num) / STATS_QUERY_CMD_COUNT) +
7043		     (((bp->fw_stats_num) % STATS_QUERY_CMD_COUNT) ? 1 : 0);
7044
7045	bp->fw_stats_req_sz = sizeof(struct stats_query_header) +
7046			num_groups * sizeof(struct stats_query_cmd_group);
7047
7048	/* Data for statistics requests + stats_conter
7049	 *
7050	 * stats_counter holds per-STORM counters that are incremented
7051	 * when STORM has finished with the current request.
7052	 *
7053	 * memory for FCoE offloaded statistics are counted anyway,
7054	 * even if they will not be sent.
7055	 */
7056	bp->fw_stats_data_sz = sizeof(struct per_port_stats) +
7057		sizeof(struct per_pf_stats) +
7058		sizeof(struct fcoe_statistics_params) +
7059		sizeof(struct per_queue_stats) * num_queue_stats +
7060		sizeof(struct stats_counter);
7061
7062	BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping,
7063			bp->fw_stats_data_sz + bp->fw_stats_req_sz);
7064
7065	/* Set shortcuts */
7066	bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats;
7067	bp->fw_stats_req_mapping = bp->fw_stats_mapping;
7068
7069	bp->fw_stats_data = (struct bnx2x_fw_stats_data *)
7070		((u8 *)bp->fw_stats + bp->fw_stats_req_sz);
7071
7072	bp->fw_stats_data_mapping = bp->fw_stats_mapping +
7073				   bp->fw_stats_req_sz;
7074	return 0;
7075
7076alloc_mem_err:
7077	BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
7078		       bp->fw_stats_data_sz + bp->fw_stats_req_sz);
7079	return -ENOMEM;
7080}
7081
7082
7083int bnx2x_alloc_mem(struct bnx2x *bp)
7084{
7085#ifdef BCM_CNIC
7086	if (!CHIP_IS_E1x(bp))
7087		/* size = the status block + ramrod buffers */
7088		BNX2X_PCI_ALLOC(bp->cnic_sb.e2_sb, &bp->cnic_sb_mapping,
7089				sizeof(struct host_hc_status_block_e2));
7090	else
7091		BNX2X_PCI_ALLOC(bp->cnic_sb.e1x_sb, &bp->cnic_sb_mapping,
7092				sizeof(struct host_hc_status_block_e1x));
7093
7094	/* allocate searcher T2 table */
7095	BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, SRC_T2_SZ);
7096#endif
7097
7098
7099	BNX2X_PCI_ALLOC(bp->def_status_blk, &bp->def_status_blk_mapping,
7100			sizeof(struct host_sp_status_block));
7101
7102	BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping,
7103			sizeof(struct bnx2x_slowpath));
7104
7105	/* Allocated memory for FW statistics  */
7106	if (bnx2x_alloc_fw_stats_mem(bp))
7107		goto alloc_mem_err;
7108
7109	bp->context.size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp);
7110
7111	BNX2X_PCI_ALLOC(bp->context.vcxt, &bp->context.cxt_mapping,
7112			bp->context.size);
7113
7114	BNX2X_ALLOC(bp->ilt->lines, sizeof(struct ilt_line) * ILT_MAX_LINES);
7115
7116	if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC))
7117		goto alloc_mem_err;
7118
7119	/* Slow path ring */
7120	BNX2X_PCI_ALLOC(bp->spq, &bp->spq_mapping, BCM_PAGE_SIZE);
7121
7122	/* EQ */
7123	BNX2X_PCI_ALLOC(bp->eq_ring, &bp->eq_mapping,
7124			BCM_PAGE_SIZE * NUM_EQ_PAGES);
7125
7126
7127	/* fastpath */
7128	/* need to be done at the end, since it's self adjusting to amount
7129	 * of memory available for RSS queues
7130	 */
7131	if (bnx2x_alloc_fp_mem(bp))
7132		goto alloc_mem_err;
7133	return 0;
7134
7135alloc_mem_err:
7136	bnx2x_free_mem(bp);
7137	return -ENOMEM;
7138}
7139
7140/*
7141 * Init service functions
7142 */
7143
7144int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
7145		      struct bnx2x_vlan_mac_obj *obj, bool set,
7146		      int mac_type, unsigned long *ramrod_flags)
7147{
7148	int rc;
7149	struct bnx2x_vlan_mac_ramrod_params ramrod_param;
7150
7151	memset(&ramrod_param, 0, sizeof(ramrod_param));
7152
7153	/* Fill general parameters */
7154	ramrod_param.vlan_mac_obj = obj;
7155	ramrod_param.ramrod_flags = *ramrod_flags;
7156
7157	/* Fill a user request section if needed */
7158	if (!test_bit(RAMROD_CONT, ramrod_flags)) {
7159		memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN);
7160
7161		__set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
7162
7163		/* Set the command: ADD or DEL */
7164		if (set)
7165			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
7166		else
7167			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL;
7168	}
7169
7170	rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
7171	if (rc < 0)
7172		BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
7173	return rc;
7174}
7175
7176int bnx2x_del_all_macs(struct bnx2x *bp,
7177		       struct bnx2x_vlan_mac_obj *mac_obj,
7178		       int mac_type, bool wait_for_comp)
7179{
7180	int rc;
7181	unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
7182
7183	/* Wait for completion of requested */
7184	if (wait_for_comp)
7185		__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
7186
7187	/* Set the mac type of addresses we want to clear */
7188	__set_bit(mac_type, &vlan_mac_flags);
7189
7190	rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags);
7191	if (rc < 0)
7192		BNX2X_ERR("Failed to delete MACs: %d\n", rc);
7193
7194	return rc;
7195}
7196
7197int bnx2x_set_eth_mac(struct bnx2x *bp, bool set)
7198{
7199	unsigned long ramrod_flags = 0;
7200
7201#ifdef BCM_CNIC
7202	if (is_zero_ether_addr(bp->dev->dev_addr) && IS_MF_ISCSI_SD(bp)) {
7203		DP(NETIF_MSG_IFUP, "Ignoring Zero MAC for iSCSI SD mode\n");
7204		return 0;
7205	}
7206#endif
7207
7208	DP(NETIF_MSG_IFUP, "Adding Eth MAC\n");
7209
7210	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
7211	/* Eth MAC is set on RSS leading client (fp[0]) */
7212	return bnx2x_set_mac_one(bp, bp->dev->dev_addr, &bp->fp->mac_obj, set,
7213				 BNX2X_ETH_MAC, &ramrod_flags);
7214}
7215
7216int bnx2x_setup_leading(struct bnx2x *bp)
7217{
7218	return bnx2x_setup_queue(bp, &bp->fp[0], 1);
7219}
7220
7221/**
7222 * bnx2x_set_int_mode - configure interrupt mode
7223 *
7224 * @bp:		driver handle
7225 *
7226 * In case of MSI-X it will also try to enable MSI-X.
7227 */
7228static void __devinit bnx2x_set_int_mode(struct bnx2x *bp)
7229{
7230	switch (int_mode) {
7231	case INT_MODE_MSI:
7232		bnx2x_enable_msi(bp);
7233		/* falling through... */
7234	case INT_MODE_INTx:
7235		bp->num_queues = 1 + NON_ETH_CONTEXT_USE;
7236		DP(NETIF_MSG_IFUP, "set number of queues to 1\n");
7237		break;
7238	default:
7239		/* Set number of queues according to bp->multi_mode value */
7240		bnx2x_set_num_queues(bp);
7241
7242		DP(NETIF_MSG_IFUP, "set number of queues to %d\n",
7243		   bp->num_queues);
7244
7245		/* if we can't use MSI-X we only need one fp,
7246		 * so try to enable MSI-X with the requested number of fp's
7247		 * and fallback to MSI or legacy INTx with one fp
7248		 */
7249		if (bnx2x_enable_msix(bp)) {
7250			/* failed to enable MSI-X */
7251			if (bp->multi_mode)
7252				DP(NETIF_MSG_IFUP,
7253					  "Multi requested but failed to "
7254					  "enable MSI-X (%d), "
7255					  "set number of queues to %d\n",
7256				   bp->num_queues,
7257				   1 + NON_ETH_CONTEXT_USE);
7258			bp->num_queues = 1 + NON_ETH_CONTEXT_USE;
7259
7260			/* Try to enable MSI */
7261			if (!(bp->flags & DISABLE_MSI_FLAG))
7262				bnx2x_enable_msi(bp);
7263		}
7264		break;
7265	}
7266}
7267
7268/* must be called prioir to any HW initializations */
7269static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp)
7270{
7271	return L2_ILT_LINES(bp);
7272}
7273
7274void bnx2x_ilt_set_info(struct bnx2x *bp)
7275{
7276	struct ilt_client_info *ilt_client;
7277	struct bnx2x_ilt *ilt = BP_ILT(bp);
7278	u16 line = 0;
7279
7280	ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp));
7281	DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line);
7282
7283	/* CDU */
7284	ilt_client = &ilt->clients[ILT_CLIENT_CDU];
7285	ilt_client->client_num = ILT_CLIENT_CDU;
7286	ilt_client->page_size = CDU_ILT_PAGE_SZ;
7287	ilt_client->flags = ILT_CLIENT_SKIP_MEM;
7288	ilt_client->start = line;
7289	line += bnx2x_cid_ilt_lines(bp);
7290#ifdef BCM_CNIC
7291	line += CNIC_ILT_LINES;
7292#endif
7293	ilt_client->end = line - 1;
7294
7295	DP(BNX2X_MSG_SP, "ilt client[CDU]: start %d, end %d, psz 0x%x, "
7296					 "flags 0x%x, hw psz %d\n",
7297	   ilt_client->start,
7298	   ilt_client->end,
7299	   ilt_client->page_size,
7300	   ilt_client->flags,
7301	   ilog2(ilt_client->page_size >> 12));
7302
7303	/* QM */
7304	if (QM_INIT(bp->qm_cid_count)) {
7305		ilt_client = &ilt->clients[ILT_CLIENT_QM];
7306		ilt_client->client_num = ILT_CLIENT_QM;
7307		ilt_client->page_size = QM_ILT_PAGE_SZ;
7308		ilt_client->flags = 0;
7309		ilt_client->start = line;
7310
7311		/* 4 bytes for each cid */
7312		line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
7313							 QM_ILT_PAGE_SZ);
7314
7315		ilt_client->end = line - 1;
7316
7317		DP(BNX2X_MSG_SP, "ilt client[QM]: start %d, end %d, psz 0x%x, "
7318						 "flags 0x%x, hw psz %d\n",
7319		   ilt_client->start,
7320		   ilt_client->end,
7321		   ilt_client->page_size,
7322		   ilt_client->flags,
7323		   ilog2(ilt_client->page_size >> 12));
7324
7325	}
7326	/* SRC */
7327	ilt_client = &ilt->clients[ILT_CLIENT_SRC];
7328#ifdef BCM_CNIC
7329	ilt_client->client_num = ILT_CLIENT_SRC;
7330	ilt_client->page_size = SRC_ILT_PAGE_SZ;
7331	ilt_client->flags = 0;
7332	ilt_client->start = line;
7333	line += SRC_ILT_LINES;
7334	ilt_client->end = line - 1;
7335
7336	DP(BNX2X_MSG_SP, "ilt client[SRC]: start %d, end %d, psz 0x%x, "
7337					 "flags 0x%x, hw psz %d\n",
7338	   ilt_client->start,
7339	   ilt_client->end,
7340	   ilt_client->page_size,
7341	   ilt_client->flags,
7342	   ilog2(ilt_client->page_size >> 12));
7343
7344#else
7345	ilt_client->flags = (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM);
7346#endif
7347
7348	/* TM */
7349	ilt_client = &ilt->clients[ILT_CLIENT_TM];
7350#ifdef BCM_CNIC
7351	ilt_client->client_num = ILT_CLIENT_TM;
7352	ilt_client->page_size = TM_ILT_PAGE_SZ;
7353	ilt_client->flags = 0;
7354	ilt_client->start = line;
7355	line += TM_ILT_LINES;
7356	ilt_client->end = line - 1;
7357
7358	DP(BNX2X_MSG_SP, "ilt client[TM]: start %d, end %d, psz 0x%x, "
7359					 "flags 0x%x, hw psz %d\n",
7360	   ilt_client->start,
7361	   ilt_client->end,
7362	   ilt_client->page_size,
7363	   ilt_client->flags,
7364	   ilog2(ilt_client->page_size >> 12));
7365
7366#else
7367	ilt_client->flags = (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM);
7368#endif
7369	BUG_ON(line > ILT_MAX_LINES);
7370}
7371
7372/**
7373 * bnx2x_pf_q_prep_init - prepare INIT transition parameters
7374 *
7375 * @bp:			driver handle
7376 * @fp:			pointer to fastpath
7377 * @init_params:	pointer to parameters structure
7378 *
7379 * parameters configured:
7380 *      - HC configuration
7381 *      - Queue's CDU context
7382 */
7383static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp,
7384	struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params)
7385{
7386
7387	u8 cos;
7388	/* FCoE Queue uses Default SB, thus has no HC capabilities */
7389	if (!IS_FCOE_FP(fp)) {
7390		__set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags);
7391		__set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags);
7392
7393		/* If HC is supporterd, enable host coalescing in the transition
7394		 * to INIT state.
7395		 */
7396		__set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags);
7397		__set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags);
7398
7399		/* HC rate */
7400		init_params->rx.hc_rate = bp->rx_ticks ?
7401			(1000000 / bp->rx_ticks) : 0;
7402		init_params->tx.hc_rate = bp->tx_ticks ?
7403			(1000000 / bp->tx_ticks) : 0;
7404
7405		/* FW SB ID */
7406		init_params->rx.fw_sb_id = init_params->tx.fw_sb_id =
7407			fp->fw_sb_id;
7408
7409		/*
7410		 * CQ index among the SB indices: FCoE clients uses the default
7411		 * SB, therefore it's different.
7412		 */
7413		init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
7414		init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
7415	}
7416
7417	/* set maximum number of COSs supported by this queue */
7418	init_params->max_cos = fp->max_cos;
7419
7420	DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n",
7421	    fp->index, init_params->max_cos);
7422
7423	/* set the context pointers queue object */
7424	for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++)
7425		init_params->cxts[cos] =
7426			&bp->context.vcxt[fp->txdata[cos].cid].eth;
7427}
7428
7429int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
7430			struct bnx2x_queue_state_params *q_params,
7431			struct bnx2x_queue_setup_tx_only_params *tx_only_params,
7432			int tx_index, bool leading)
7433{
7434	memset(tx_only_params, 0, sizeof(*tx_only_params));
7435
7436	/* Set the command */
7437	q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
7438
7439	/* Set tx-only QUEUE flags: don't zero statistics */
7440	tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false);
7441
7442	/* choose the index of the cid to send the slow path on */
7443	tx_only_params->cid_index = tx_index;
7444
7445	/* Set general TX_ONLY_SETUP parameters */
7446	bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index);
7447
7448	/* Set Tx TX_ONLY_SETUP parameters */
7449	bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index);
7450
7451	DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:"
7452			 "cos %d, primary cid %d, cid %d, "
7453			 "client id %d, sp-client id %d, flags %lx\n",
7454	   tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
7455	   q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
7456	   tx_only_params->gen_params.spcl_id, tx_only_params->flags);
7457
7458	/* send the ramrod */
7459	return bnx2x_queue_state_change(bp, q_params);
7460}
7461
7462
7463/**
7464 * bnx2x_setup_queue - setup queue
7465 *
7466 * @bp:		driver handle
7467 * @fp:		pointer to fastpath
7468 * @leading:	is leading
7469 *
7470 * This function performs 2 steps in a Queue state machine
7471 *      actually: 1) RESET->INIT 2) INIT->SETUP
7472 */
7473
7474int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
7475		       bool leading)
7476{
7477	struct bnx2x_queue_state_params q_params = {0};
7478	struct bnx2x_queue_setup_params *setup_params =
7479						&q_params.params.setup;
7480	struct bnx2x_queue_setup_tx_only_params *tx_only_params =
7481						&q_params.params.tx_only;
7482	int rc;
7483	u8 tx_index;
7484
7485	DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index);
7486
7487	/* reset IGU state skip FCoE L2 queue */
7488	if (!IS_FCOE_FP(fp))
7489		bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0,
7490			     IGU_INT_ENABLE, 0);
7491
7492	q_params.q_obj = &fp->q_obj;
7493	/* We want to wait for completion in this context */
7494	__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
7495
7496	/* Prepare the INIT parameters */
7497	bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init);
7498
7499	/* Set the command */
7500	q_params.cmd = BNX2X_Q_CMD_INIT;
7501
7502	/* Change the state to INIT */
7503	rc = bnx2x_queue_state_change(bp, &q_params);
7504	if (rc) {
7505		BNX2X_ERR("Queue(%d) INIT failed\n", fp->index);
7506		return rc;
7507	}
7508
7509	DP(BNX2X_MSG_SP, "init complete\n");
7510
7511
7512	/* Now move the Queue to the SETUP state... */
7513	memset(setup_params, 0, sizeof(*setup_params));
7514
7515	/* Set QUEUE flags */
7516	setup_params->flags = bnx2x_get_q_flags(bp, fp, leading);
7517
7518	/* Set general SETUP parameters */
7519	bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params,
7520				FIRST_TX_COS_INDEX);
7521
7522	bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params,
7523			    &setup_params->rxq_params);
7524
7525	bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params,
7526			   FIRST_TX_COS_INDEX);
7527
7528	/* Set the command */
7529	q_params.cmd = BNX2X_Q_CMD_SETUP;
7530
7531	/* Change the state to SETUP */
7532	rc = bnx2x_queue_state_change(bp, &q_params);
7533	if (rc) {
7534		BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index);
7535		return rc;
7536	}
7537
7538	/* loop through the relevant tx-only indices */
7539	for (tx_index = FIRST_TX_ONLY_COS_INDEX;
7540	      tx_index < fp->max_cos;
7541	      tx_index++) {
7542
7543		/* prepare and send tx-only ramrod*/
7544		rc = bnx2x_setup_tx_only(bp, fp, &q_params,
7545					  tx_only_params, tx_index, leading);
7546		if (rc) {
7547			BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n",
7548				  fp->index, tx_index);
7549			return rc;
7550		}
7551	}
7552
7553	return rc;
7554}
7555
7556static int bnx2x_stop_queue(struct bnx2x *bp, int index)
7557{
7558	struct bnx2x_fastpath *fp = &bp->fp[index];
7559	struct bnx2x_fp_txdata *txdata;
7560	struct bnx2x_queue_state_params q_params = {0};
7561	int rc, tx_index;
7562
7563	DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid);
7564
7565	q_params.q_obj = &fp->q_obj;
7566	/* We want to wait for completion in this context */
7567	__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
7568
7569
7570	/* close tx-only connections */
7571	for (tx_index = FIRST_TX_ONLY_COS_INDEX;
7572	     tx_index < fp->max_cos;
7573	     tx_index++){
7574
7575		/* ascertain this is a normal queue*/
7576		txdata = &fp->txdata[tx_index];
7577
7578		DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n",
7579							txdata->txq_index);
7580
7581		/* send halt terminate on tx-only connection */
7582		q_params.cmd = BNX2X_Q_CMD_TERMINATE;
7583		memset(&q_params.params.terminate, 0,
7584		       sizeof(q_params.params.terminate));
7585		q_params.params.terminate.cid_index = tx_index;
7586
7587		rc = bnx2x_queue_state_change(bp, &q_params);
7588		if (rc)
7589			return rc;
7590
7591		/* send halt terminate on tx-only connection */
7592		q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
7593		memset(&q_params.params.cfc_del, 0,
7594		       sizeof(q_params.params.cfc_del));
7595		q_params.params.cfc_del.cid_index = tx_index;
7596		rc = bnx2x_queue_state_change(bp, &q_params);
7597		if (rc)
7598			return rc;
7599	}
7600	/* Stop the primary connection: */
7601	/* ...halt the connection */
7602	q_params.cmd = BNX2X_Q_CMD_HALT;
7603	rc = bnx2x_queue_state_change(bp, &q_params);
7604	if (rc)
7605		return rc;
7606
7607	/* ...terminate the connection */
7608	q_params.cmd = BNX2X_Q_CMD_TERMINATE;
7609	memset(&q_params.params.terminate, 0,
7610	       sizeof(q_params.params.terminate));
7611	q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
7612	rc = bnx2x_queue_state_change(bp, &q_params);
7613	if (rc)
7614		return rc;
7615	/* ...delete cfc entry */
7616	q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
7617	memset(&q_params.params.cfc_del, 0,
7618	       sizeof(q_params.params.cfc_del));
7619	q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
7620	return bnx2x_queue_state_change(bp, &q_params);
7621}
7622
7623
7624static void bnx2x_reset_func(struct bnx2x *bp)
7625{
7626	int port = BP_PORT(bp);
7627	int func = BP_FUNC(bp);
7628	int i;
7629
7630	/* Disable the function in the FW */
7631	REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
7632	REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
7633	REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
7634	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
7635
7636	/* FP SBs */
7637	for_each_eth_queue(bp, i) {
7638		struct bnx2x_fastpath *fp = &bp->fp[i];
7639		REG_WR8(bp, BAR_CSTRORM_INTMEM +
7640			   CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
7641			   SB_DISABLED);
7642	}
7643
7644#ifdef BCM_CNIC
7645	/* CNIC SB */
7646	REG_WR8(bp, BAR_CSTRORM_INTMEM +
7647		CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(bnx2x_cnic_fw_sb_id(bp)),
7648		SB_DISABLED);
7649#endif
7650	/* SP SB */
7651	REG_WR8(bp, BAR_CSTRORM_INTMEM +
7652		   CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func),
7653		   SB_DISABLED);
7654
7655	for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++)
7656		REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
7657		       0);
7658
7659	/* Configure IGU */
7660	if (bp->common.int_block == INT_BLOCK_HC) {
7661		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
7662		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
7663	} else {
7664		REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
7665		REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
7666	}
7667
7668#ifdef BCM_CNIC
7669	/* Disable Timer scan */
7670	REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
7671	/*
7672	 * Wait for at least 10ms and up to 2 second for the timers scan to
7673	 * complete
7674	 */
7675	for (i = 0; i < 200; i++) {
7676		msleep(10);
7677		if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
7678			break;
7679	}
7680#endif
7681	/* Clear ILT */
7682	bnx2x_clear_func_ilt(bp, func);
7683
7684	/* Timers workaround bug for E2: if this is vnic-3,
7685	 * we need to set the entire ilt range for this timers.
7686	 */
7687	if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) {
7688		struct ilt_client_info ilt_cli;
7689		/* use dummy TM client */
7690		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
7691		ilt_cli.start = 0;
7692		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
7693		ilt_cli.client_num = ILT_CLIENT_TM;
7694
7695		bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR);
7696	}
7697
7698	/* this assumes that reset_port() called before reset_func()*/
7699	if (!CHIP_IS_E1x(bp))
7700		bnx2x_pf_disable(bp);
7701
7702	bp->dmae_ready = 0;
7703}
7704
7705static void bnx2x_reset_port(struct bnx2x *bp)
7706{
7707	int port = BP_PORT(bp);
7708	u32 val;
7709
7710	/* Reset physical Link */
7711	bnx2x__link_reset(bp);
7712
7713	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
7714
7715	/* Do not rcv packets to BRB */
7716	REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0);
7717	/* Do not direct rcv packets that are not for MCP to the BRB */
7718	REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
7719			   NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
7720
7721	/* Configure AEU */
7722	REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0);
7723
7724	msleep(100);
7725	/* Check for BRB port occupancy */
7726	val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
7727	if (val)
7728		DP(NETIF_MSG_IFDOWN,
7729		   "BRB1 is not empty  %d blocks are occupied\n", val);
7730
7731	/* TODO: Close Doorbell port? */
7732}
7733
7734static inline int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code)
7735{
7736	struct bnx2x_func_state_params func_params = {0};
7737
7738	/* Prepare parameters for function state transitions */
7739	__set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
7740
7741	func_params.f_obj = &bp->func_obj;
7742	func_params.cmd = BNX2X_F_CMD_HW_RESET;
7743
7744	func_params.params.hw_init.load_phase = load_code;
7745
7746	return bnx2x_func_state_change(bp, &func_params);
7747}
7748
7749static inline int bnx2x_func_stop(struct bnx2x *bp)
7750{
7751	struct bnx2x_func_state_params func_params = {0};
7752	int rc;
7753
7754	/* Prepare parameters for function state transitions */
7755	__set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
7756	func_params.f_obj = &bp->func_obj;
7757	func_params.cmd = BNX2X_F_CMD_STOP;
7758
7759	/*
7760	 * Try to stop the function the 'good way'. If fails (in case
7761	 * of a parity error during bnx2x_chip_cleanup()) and we are
7762	 * not in a debug mode, perform a state transaction in order to
7763	 * enable further HW_RESET transaction.
7764	 */
7765	rc = bnx2x_func_state_change(bp, &func_params);
7766	if (rc) {
7767#ifdef BNX2X_STOP_ON_ERROR
7768		return rc;
7769#else
7770		BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry "
7771			  "transaction\n");
7772		__set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
7773		return bnx2x_func_state_change(bp, &func_params);
7774#endif
7775	}
7776
7777	return 0;
7778}
7779
7780/**
7781 * bnx2x_send_unload_req - request unload mode from the MCP.
7782 *
7783 * @bp:			driver handle
7784 * @unload_mode:	requested function's unload mode
7785 *
7786 * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
7787 */
7788u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
7789{
7790	u32 reset_code = 0;
7791	int port = BP_PORT(bp);
7792
7793	/* Select the UNLOAD request mode */
7794	if (unload_mode == UNLOAD_NORMAL)
7795		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
7796
7797	else if (bp->flags & NO_WOL_FLAG)
7798		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
7799
7800	else if (bp->wol) {
7801		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
7802		u8 *mac_addr = bp->dev->dev_addr;
7803		u32 val;
7804		u16 pmc;
7805
7806		/* The mac address is written to entries 1-4 to
7807		 * preserve entry 0 which is used by the PMF
7808		 */
7809		u8 entry = (BP_VN(bp) + 1)*8;
7810
7811		val = (mac_addr[0] << 8) | mac_addr[1];
7812		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
7813
7814		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
7815		      (mac_addr[4] << 8) | mac_addr[5];
7816		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
7817
7818		/* Enable the PME and clear the status */
7819		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmc);
7820		pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
7821		pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, pmc);
7822
7823		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
7824
7825	} else
7826		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
7827
7828	/* Send the request to the MCP */
7829	if (!BP_NOMCP(bp))
7830		reset_code = bnx2x_fw_command(bp, reset_code, 0);
7831	else {
7832		int path = BP_PATH(bp);
7833
7834		DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d]      "
7835				     "%d, %d, %d\n",
7836		   path, load_count[path][0], load_count[path][1],
7837		   load_count[path][2]);
7838		load_count[path][0]--;
7839		load_count[path][1 + port]--;
7840		DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d]  "
7841				     "%d, %d, %d\n",
7842		   path, load_count[path][0], load_count[path][1],
7843		   load_count[path][2]);
7844		if (load_count[path][0] == 0)
7845			reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
7846		else if (load_count[path][1 + port] == 0)
7847			reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
7848		else
7849			reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
7850	}
7851
7852	return reset_code;
7853}
7854
7855/**
7856 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
7857 *
7858 * @bp:		driver handle
7859 */
7860void bnx2x_send_unload_done(struct bnx2x *bp)
7861{
7862	/* Report UNLOAD_DONE to MCP */
7863	if (!BP_NOMCP(bp))
7864		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
7865}
7866
7867static inline int bnx2x_func_wait_started(struct bnx2x *bp)
7868{
7869	int tout = 50;
7870	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
7871
7872	if (!bp->port.pmf)
7873		return 0;
7874
7875	/*
7876	 * (assumption: No Attention from MCP at this stage)
7877	 * PMF probably in the middle of TXdisable/enable transaction
7878	 * 1. Sync IRS for default SB
7879	 * 2. Sync SP queue - this guarantes us that attention handling started
7880	 * 3. Wait, that TXdisable/enable transaction completes
7881	 *
7882	 * 1+2 guranty that if DCBx attention was scheduled it already changed
7883	 * pending bit of transaction from STARTED-->TX_STOPPED, if we alredy
7884	 * received complettion for the transaction the state is TX_STOPPED.
7885	 * State will return to STARTED after completion of TX_STOPPED-->STARTED
7886	 * transaction.
7887	 */
7888
7889	/* make sure default SB ISR is done */
7890	if (msix)
7891		synchronize_irq(bp->msix_table[0].vector);
7892	else
7893		synchronize_irq(bp->pdev->irq);
7894
7895	flush_workqueue(bnx2x_wq);
7896
7897	while (bnx2x_func_get_state(bp, &bp->func_obj) !=
7898				BNX2X_F_STATE_STARTED && tout--)
7899		msleep(20);
7900
7901	if (bnx2x_func_get_state(bp, &bp->func_obj) !=
7902						BNX2X_F_STATE_STARTED) {
7903#ifdef BNX2X_STOP_ON_ERROR
7904		return -EBUSY;
7905#else
7906		/*
7907		 * Failed to complete the transaction in a "good way"
7908		 * Force both transactions with CLR bit
7909		 */
7910		struct bnx2x_func_state_params func_params = {0};
7911
7912		DP(BNX2X_MSG_SP, "Hmmm... unexpected function state! "
7913			  "Forcing STARTED-->TX_ST0PPED-->STARTED\n");
7914
7915		func_params.f_obj = &bp->func_obj;
7916		__set_bit(RAMROD_DRV_CLR_ONLY,
7917					&func_params.ramrod_flags);
7918
7919		/* STARTED-->TX_ST0PPED */
7920		func_params.cmd = BNX2X_F_CMD_TX_STOP;
7921		bnx2x_func_state_change(bp, &func_params);
7922
7923		/* TX_ST0PPED-->STARTED */
7924		func_params.cmd = BNX2X_F_CMD_TX_START;
7925		return bnx2x_func_state_change(bp, &func_params);
7926#endif
7927	}
7928
7929	return 0;
7930}
7931
7932void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
7933{
7934	int port = BP_PORT(bp);
7935	int i, rc = 0;
7936	u8 cos;
7937	struct bnx2x_mcast_ramrod_params rparam = {0};
7938	u32 reset_code;
7939
7940	/* Wait until tx fastpath tasks complete */
7941	for_each_tx_queue(bp, i) {
7942		struct bnx2x_fastpath *fp = &bp->fp[i];
7943
7944		for_each_cos_in_tx_queue(fp, cos)
7945			rc = bnx2x_clean_tx_queue(bp, &fp->txdata[cos]);
7946#ifdef BNX2X_STOP_ON_ERROR
7947		if (rc)
7948			return;
7949#endif
7950	}
7951
7952	/* Give HW time to discard old tx messages */
7953	usleep_range(1000, 1000);
7954
7955	/* Clean all ETH MACs */
7956	rc = bnx2x_del_all_macs(bp, &bp->fp[0].mac_obj, BNX2X_ETH_MAC, false);
7957	if (rc < 0)
7958		BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc);
7959
7960	/* Clean up UC list  */
7961	rc = bnx2x_del_all_macs(bp, &bp->fp[0].mac_obj, BNX2X_UC_LIST_MAC,
7962				true);
7963	if (rc < 0)
7964		BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: "
7965			  "%d\n", rc);
7966
7967	/* Disable LLH */
7968	if (!CHIP_IS_E1(bp))
7969		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
7970
7971	/* Set "drop all" (stop Rx).
7972	 * We need to take a netif_addr_lock() here in order to prevent
7973	 * a race between the completion code and this code.
7974	 */
7975	netif_addr_lock_bh(bp->dev);
7976	/* Schedule the rx_mode command */
7977	if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
7978		set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
7979	else
7980		bnx2x_set_storm_rx_mode(bp);
7981
7982	/* Cleanup multicast configuration */
7983	rparam.mcast_obj = &bp->mcast_obj;
7984	rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
7985	if (rc < 0)
7986		BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc);
7987
7988	netif_addr_unlock_bh(bp->dev);
7989
7990
7991
7992	/*
7993	 * Send the UNLOAD_REQUEST to the MCP. This will return if
7994	 * this function should perform FUNC, PORT or COMMON HW
7995	 * reset.
7996	 */
7997	reset_code = bnx2x_send_unload_req(bp, unload_mode);
7998
7999	/*
8000	 * (assumption: No Attention from MCP at this stage)
8001	 * PMF probably in the middle of TXdisable/enable transaction
8002	 */
8003	rc = bnx2x_func_wait_started(bp);
8004	if (rc) {
8005		BNX2X_ERR("bnx2x_func_wait_started failed\n");
8006#ifdef BNX2X_STOP_ON_ERROR
8007		return;
8008#endif
8009	}
8010
8011	/* Close multi and leading connections
8012	 * Completions for ramrods are collected in a synchronous way
8013	 */
8014	for_each_queue(bp, i)
8015		if (bnx2x_stop_queue(bp, i))
8016#ifdef BNX2X_STOP_ON_ERROR
8017			return;
8018#else
8019			goto unload_error;
8020#endif
8021	/* If SP settings didn't get completed so far - something
8022	 * very wrong has happen.
8023	 */
8024	if (!bnx2x_wait_sp_comp(bp, ~0x0UL))
8025		BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n");
8026
8027#ifndef BNX2X_STOP_ON_ERROR
8028unload_error:
8029#endif
8030	rc = bnx2x_func_stop(bp);
8031	if (rc) {
8032		BNX2X_ERR("Function stop failed!\n");
8033#ifdef BNX2X_STOP_ON_ERROR
8034		return;
8035#endif
8036	}
8037
8038	/* Disable HW interrupts, NAPI */
8039	bnx2x_netif_stop(bp, 1);
8040
8041	/* Release IRQs */
8042	bnx2x_free_irq(bp);
8043
8044	/* Reset the chip */
8045	rc = bnx2x_reset_hw(bp, reset_code);
8046	if (rc)
8047		BNX2X_ERR("HW_RESET failed\n");
8048
8049
8050	/* Report UNLOAD_DONE to MCP */
8051	bnx2x_send_unload_done(bp);
8052}
8053
8054void bnx2x_disable_close_the_gate(struct bnx2x *bp)
8055{
8056	u32 val;
8057
8058	DP(NETIF_MSG_HW, "Disabling \"close the gates\"\n");
8059
8060	if (CHIP_IS_E1(bp)) {
8061		int port = BP_PORT(bp);
8062		u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
8063			MISC_REG_AEU_MASK_ATTN_FUNC_0;
8064
8065		val = REG_RD(bp, addr);
8066		val &= ~(0x300);
8067		REG_WR(bp, addr, val);
8068	} else {
8069		val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK);
8070		val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
8071			 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
8072		REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val);
8073	}
8074}
8075
8076/* Close gates #2, #3 and #4: */
8077static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
8078{
8079	u32 val;
8080
8081	/* Gates #2 and #4a are closed/opened for "not E1" only */
8082	if (!CHIP_IS_E1(bp)) {
8083		/* #4 */
8084		REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close);
8085		/* #2 */
8086		REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close);
8087	}
8088
8089	/* #3 */
8090	if (CHIP_IS_E1x(bp)) {
8091		/* Prevent interrupts from HC on both ports */
8092		val = REG_RD(bp, HC_REG_CONFIG_1);
8093		REG_WR(bp, HC_REG_CONFIG_1,
8094		       (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) :
8095		       (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1));
8096
8097		val = REG_RD(bp, HC_REG_CONFIG_0);
8098		REG_WR(bp, HC_REG_CONFIG_0,
8099		       (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
8100		       (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
8101	} else {
8102		/* Prevent incomming interrupts in IGU */
8103		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
8104
8105		REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
8106		       (!close) ?
8107		       (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) :
8108		       (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
8109	}
8110
8111	DP(NETIF_MSG_HW, "%s gates #2, #3 and #4\n",
8112		close ? "closing" : "opening");
8113	mmiowb();
8114}
8115
8116#define SHARED_MF_CLP_MAGIC  0x80000000 /* `magic' bit */
8117
8118static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val)
8119{
8120	/* Do some magic... */
8121	u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
8122	*magic_val = val & SHARED_MF_CLP_MAGIC;
8123	MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
8124}
8125
8126/**
8127 * bnx2x_clp_reset_done - restore the value of the `magic' bit.
8128 *
8129 * @bp:		driver handle
8130 * @magic_val:	old value of the `magic' bit.
8131 */
8132static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
8133{
8134	/* Restore the `magic' bit value... */
8135	u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
8136	MF_CFG_WR(bp, shared_mf_config.clp_mb,
8137		(val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
8138}
8139
8140/**
8141 * bnx2x_reset_mcp_prep - prepare for MCP reset.
8142 *
8143 * @bp:		driver handle
8144 * @magic_val:	old value of 'magic' bit.
8145 *
8146 * Takes care of CLP configurations.
8147 */
8148static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
8149{
8150	u32 shmem;
8151	u32 validity_offset;
8152
8153	DP(NETIF_MSG_HW, "Starting\n");
8154
8155	/* Set `magic' bit in order to save MF config */
8156	if (!CHIP_IS_E1(bp))
8157		bnx2x_clp_reset_prep(bp, magic_val);
8158
8159	/* Get shmem offset */
8160	shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
8161	validity_offset = offsetof(struct shmem_region, validity_map[0]);
8162
8163	/* Clear validity map flags */
8164	if (shmem > 0)
8165		REG_WR(bp, shmem + validity_offset, 0);
8166}
8167
8168#define MCP_TIMEOUT      5000   /* 5 seconds (in ms) */
8169#define MCP_ONE_TIMEOUT  100    /* 100 ms */
8170
8171/**
8172 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
8173 *
8174 * @bp:	driver handle
8175 */
8176static inline void bnx2x_mcp_wait_one(struct bnx2x *bp)
8177{
8178	/* special handling for emulation and FPGA,
8179	   wait 10 times longer */
8180	if (CHIP_REV_IS_SLOW(bp))
8181		msleep(MCP_ONE_TIMEOUT*10);
8182	else
8183		msleep(MCP_ONE_TIMEOUT);
8184}
8185
8186/*
8187 * initializes bp->common.shmem_base and waits for validity signature to appear
8188 */
8189static int bnx2x_init_shmem(struct bnx2x *bp)
8190{
8191	int cnt = 0;
8192	u32 val = 0;
8193
8194	do {
8195		bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
8196		if (bp->common.shmem_base) {
8197			val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
8198			if (val & SHR_MEM_VALIDITY_MB)
8199				return 0;
8200		}
8201
8202		bnx2x_mcp_wait_one(bp);
8203
8204	} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
8205
8206	BNX2X_ERR("BAD MCP validity signature\n");
8207
8208	return -ENODEV;
8209}
8210
8211static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
8212{
8213	int rc = bnx2x_init_shmem(bp);
8214
8215	/* Restore the `magic' bit value */
8216	if (!CHIP_IS_E1(bp))
8217		bnx2x_clp_reset_done(bp, magic_val);
8218
8219	return rc;
8220}
8221
8222static void bnx2x_pxp_prep(struct bnx2x *bp)
8223{
8224	if (!CHIP_IS_E1(bp)) {
8225		REG_WR(bp, PXP2_REG_RD_START_INIT, 0);
8226		REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0);
8227		mmiowb();
8228	}
8229}
8230
8231/*
8232 * Reset the whole chip except for:
8233 *      - PCIE core
8234 *      - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
8235 *              one reset bit)
8236 *      - IGU
8237 *      - MISC (including AEU)
8238 *      - GRC
8239 *      - RBCN, RBCP
8240 */
8241static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global)
8242{
8243	u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
8244	u32 global_bits2, stay_reset2;
8245
8246	/*
8247	 * Bits that have to be set in reset_mask2 if we want to reset 'global'
8248	 * (per chip) blocks.
8249	 */
8250	global_bits2 =
8251		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
8252		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
8253
8254	/* Don't reset the following blocks */
8255	not_reset_mask1 =
8256		MISC_REGISTERS_RESET_REG_1_RST_HC |
8257		MISC_REGISTERS_RESET_REG_1_RST_PXPV |
8258		MISC_REGISTERS_RESET_REG_1_RST_PXP;
8259
8260	not_reset_mask2 =
8261		MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
8262		MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
8263		MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
8264		MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
8265		MISC_REGISTERS_RESET_REG_2_RST_RBCN |
8266		MISC_REGISTERS_RESET_REG_2_RST_GRC  |
8267		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
8268		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
8269		MISC_REGISTERS_RESET_REG_2_RST_ATC |
8270		MISC_REGISTERS_RESET_REG_2_PGLC;
8271
8272	/*
8273	 * Keep the following blocks in reset:
8274	 *  - all xxMACs are handled by the bnx2x_link code.
8275	 */
8276	stay_reset2 =
8277		MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
8278		MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
8279		MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
8280		MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
8281		MISC_REGISTERS_RESET_REG_2_UMAC0 |
8282		MISC_REGISTERS_RESET_REG_2_UMAC1 |
8283		MISC_REGISTERS_RESET_REG_2_XMAC |
8284		MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
8285
8286	/* Full reset masks according to the chip */
8287	reset_mask1 = 0xffffffff;
8288
8289	if (CHIP_IS_E1(bp))
8290		reset_mask2 = 0xffff;
8291	else if (CHIP_IS_E1H(bp))
8292		reset_mask2 = 0x1ffff;
8293	else if (CHIP_IS_E2(bp))
8294		reset_mask2 = 0xfffff;
8295	else /* CHIP_IS_E3 */
8296		reset_mask2 = 0x3ffffff;
8297
8298	/* Don't reset global blocks unless we need to */
8299	if (!global)
8300		reset_mask2 &= ~global_bits2;
8301
8302	/*
8303	 * In case of attention in the QM, we need to reset PXP
8304	 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
8305	 * because otherwise QM reset would release 'close the gates' shortly
8306	 * before resetting the PXP, then the PSWRQ would send a write
8307	 * request to PGLUE. Then when PXP is reset, PGLUE would try to
8308	 * read the payload data from PSWWR, but PSWWR would not
8309	 * respond. The write queue in PGLUE would stuck, dmae commands
8310	 * would not return. Therefore it's important to reset the second
8311	 * reset register (containing the
8312	 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
8313	 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
8314	 * bit).
8315	 */
8316	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
8317	       reset_mask2 & (~not_reset_mask2));
8318
8319	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
8320	       reset_mask1 & (~not_reset_mask1));
8321
8322	barrier();
8323	mmiowb();
8324
8325	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
8326	       reset_mask2 & (~stay_reset2));
8327
8328	barrier();
8329	mmiowb();
8330
8331	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
8332	mmiowb();
8333}
8334
8335/**
8336 * bnx2x_er_poll_igu_vq - poll for pending writes bit.
8337 * It should get cleared in no more than 1s.
8338 *
8339 * @bp:	driver handle
8340 *
8341 * It should get cleared in no more than 1s. Returns 0 if
8342 * pending writes bit gets cleared.
8343 */
8344static int bnx2x_er_poll_igu_vq(struct bnx2x *bp)
8345{
8346	u32 cnt = 1000;
8347	u32 pend_bits = 0;
8348
8349	do {
8350		pend_bits  = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS);
8351
8352		if (pend_bits == 0)
8353			break;
8354
8355		usleep_range(1000, 1000);
8356	} while (cnt-- > 0);
8357
8358	if (cnt <= 0) {
8359		BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n",
8360			  pend_bits);
8361		return -EBUSY;
8362	}
8363
8364	return 0;
8365}
8366
8367static int bnx2x_process_kill(struct bnx2x *bp, bool global)
8368{
8369	int cnt = 1000;
8370	u32 val = 0;
8371	u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
8372
8373
8374	/* Empty the Tetris buffer, wait for 1s */
8375	do {
8376		sr_cnt  = REG_RD(bp, PXP2_REG_RD_SR_CNT);
8377		blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT);
8378		port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0);
8379		port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1);
8380		pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2);
8381		if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
8382		    ((port_is_idle_0 & 0x1) == 0x1) &&
8383		    ((port_is_idle_1 & 0x1) == 0x1) &&
8384		    (pgl_exp_rom2 == 0xffffffff))
8385			break;
8386		usleep_range(1000, 1000);
8387	} while (cnt-- > 0);
8388
8389	if (cnt <= 0) {
8390		DP(NETIF_MSG_HW, "Tetris buffer didn't get empty or there"
8391			  " are still"
8392			  " outstanding read requests after 1s!\n");
8393		DP(NETIF_MSG_HW, "sr_cnt=0x%08x, blk_cnt=0x%08x,"
8394			  " port_is_idle_0=0x%08x,"
8395			  " port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
8396			  sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
8397			  pgl_exp_rom2);
8398		return -EAGAIN;
8399	}
8400
8401	barrier();
8402
8403	/* Close gates #2, #3 and #4 */
8404	bnx2x_set_234_gates(bp, true);
8405
8406	/* Poll for IGU VQs for 57712 and newer chips */
8407	if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp))
8408		return -EAGAIN;
8409
8410
8411	/* TBD: Indicate that "process kill" is in progress to MCP */
8412
8413	/* Clear "unprepared" bit */
8414	REG_WR(bp, MISC_REG_UNPREPARED, 0);
8415	barrier();
8416
8417	/* Make sure all is written to the chip before the reset */
8418	mmiowb();
8419
8420	/* Wait for 1ms to empty GLUE and PCI-E core queues,
8421	 * PSWHST, GRC and PSWRD Tetris buffer.
8422	 */
8423	usleep_range(1000, 1000);
8424
8425	/* Prepare to chip reset: */
8426	/* MCP */
8427	if (global)
8428		bnx2x_reset_mcp_prep(bp, &val);
8429
8430	/* PXP */
8431	bnx2x_pxp_prep(bp);
8432	barrier();
8433
8434	/* reset the chip */
8435	bnx2x_process_kill_chip_reset(bp, global);
8436	barrier();
8437
8438	/* Recover after reset: */
8439	/* MCP */
8440	if (global && bnx2x_reset_mcp_comp(bp, val))
8441		return -EAGAIN;
8442
8443	/* TBD: Add resetting the NO_MCP mode DB here */
8444
8445	/* PXP */
8446	bnx2x_pxp_prep(bp);
8447
8448	/* Open the gates #2, #3 and #4 */
8449	bnx2x_set_234_gates(bp, false);
8450
8451	/* TBD: IGU/AEU preparation bring back the AEU/IGU to a
8452	 * reset state, re-enable attentions. */
8453
8454	return 0;
8455}
8456
8457int bnx2x_leader_reset(struct bnx2x *bp)
8458{
8459	int rc = 0;
8460	bool global = bnx2x_reset_is_global(bp);
8461
8462	/* Try to recover after the failure */
8463	if (bnx2x_process_kill(bp, global)) {
8464		netdev_err(bp->dev, "Something bad had happen on engine %d! "
8465				    "Aii!\n", BP_PATH(bp));
8466		rc = -EAGAIN;
8467		goto exit_leader_reset;
8468	}
8469
8470	/*
8471	 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver
8472	 * state.
8473	 */
8474	bnx2x_set_reset_done(bp);
8475	if (global)
8476		bnx2x_clear_reset_global(bp);
8477
8478exit_leader_reset:
8479	bp->is_leader = 0;
8480	bnx2x_release_leader_lock(bp);
8481	smp_mb();
8482	return rc;
8483}
8484
8485static inline void bnx2x_recovery_failed(struct bnx2x *bp)
8486{
8487	netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n");
8488
8489	/* Disconnect this device */
8490	netif_device_detach(bp->dev);
8491
8492	/*
8493	 * Block ifup for all function on this engine until "process kill"
8494	 * or power cycle.
8495	 */
8496	bnx2x_set_reset_in_progress(bp);
8497
8498	/* Shut down the power */
8499	bnx2x_set_power_state(bp, PCI_D3hot);
8500
8501	bp->recovery_state = BNX2X_RECOVERY_FAILED;
8502
8503	smp_mb();
8504}
8505
8506/*
8507 * Assumption: runs under rtnl lock. This together with the fact
8508 * that it's called only from bnx2x_sp_rtnl() ensure that it
8509 * will never be called when netif_running(bp->dev) is false.
8510 */
8511static void bnx2x_parity_recover(struct bnx2x *bp)
8512{
8513	bool global = false;
8514
8515	DP(NETIF_MSG_HW, "Handling parity\n");
8516	while (1) {
8517		switch (bp->recovery_state) {
8518		case BNX2X_RECOVERY_INIT:
8519			DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n");
8520			bnx2x_chk_parity_attn(bp, &global, false);
8521
8522			/* Try to get a LEADER_LOCK HW lock */
8523			if (bnx2x_trylock_leader_lock(bp)) {
8524				bnx2x_set_reset_in_progress(bp);
8525				/*
8526				 * Check if there is a global attention and if
8527				 * there was a global attention, set the global
8528				 * reset bit.
8529				 */
8530
8531				if (global)
8532					bnx2x_set_reset_global(bp);
8533
8534				bp->is_leader = 1;
8535			}
8536
8537			/* Stop the driver */
8538			/* If interface has been removed - break */
8539			if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY))
8540				return;
8541
8542			bp->recovery_state = BNX2X_RECOVERY_WAIT;
8543
8544			/*
8545			 * Reset MCP command sequence number and MCP mail box
8546			 * sequence as we are going to reset the MCP.
8547			 */
8548			if (global) {
8549				bp->fw_seq = 0;
8550				bp->fw_drv_pulse_wr_seq = 0;
8551			}
8552
8553			/* Ensure "is_leader", MCP command sequence and
8554			 * "recovery_state" update values are seen on other
8555			 * CPUs.
8556			 */
8557			smp_mb();
8558			break;
8559
8560		case BNX2X_RECOVERY_WAIT:
8561			DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n");
8562			if (bp->is_leader) {
8563				int other_engine = BP_PATH(bp) ? 0 : 1;
8564				u32 other_load_counter =
8565					bnx2x_get_load_cnt(bp, other_engine);
8566				u32 load_counter =
8567					bnx2x_get_load_cnt(bp, BP_PATH(bp));
8568				global = bnx2x_reset_is_global(bp);
8569
8570				/*
8571				 * In case of a parity in a global block, let
8572				 * the first leader that performs a
8573				 * leader_reset() reset the global blocks in
8574				 * order to clear global attentions. Otherwise
8575				 * the the gates will remain closed for that
8576				 * engine.
8577				 */
8578				if (load_counter ||
8579				    (global && other_load_counter)) {
8580					/* Wait until all other functions get
8581					 * down.
8582					 */
8583					schedule_delayed_work(&bp->sp_rtnl_task,
8584								HZ/10);
8585					return;
8586				} else {
8587					/* If all other functions got down -
8588					 * try to bring the chip back to
8589					 * normal. In any case it's an exit
8590					 * point for a leader.
8591					 */
8592					if (bnx2x_leader_reset(bp)) {
8593						bnx2x_recovery_failed(bp);
8594						return;
8595					}
8596
8597					/* If we are here, means that the
8598					 * leader has succeeded and doesn't
8599					 * want to be a leader any more. Try
8600					 * to continue as a none-leader.
8601					 */
8602					break;
8603				}
8604			} else { /* non-leader */
8605				if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) {
8606					/* Try to get a LEADER_LOCK HW lock as
8607					 * long as a former leader may have
8608					 * been unloaded by the user or
8609					 * released a leadership by another
8610					 * reason.
8611					 */
8612					if (bnx2x_trylock_leader_lock(bp)) {
8613						/* I'm a leader now! Restart a
8614						 * switch case.
8615						 */
8616						bp->is_leader = 1;
8617						break;
8618					}
8619
8620					schedule_delayed_work(&bp->sp_rtnl_task,
8621								HZ/10);
8622					return;
8623
8624				} else {
8625					/*
8626					 * If there was a global attention, wait
8627					 * for it to be cleared.
8628					 */
8629					if (bnx2x_reset_is_global(bp)) {
8630						schedule_delayed_work(
8631							&bp->sp_rtnl_task,
8632							HZ/10);
8633						return;
8634					}
8635
8636					if (bnx2x_nic_load(bp, LOAD_NORMAL))
8637						bnx2x_recovery_failed(bp);
8638					else {
8639						bp->recovery_state =
8640							BNX2X_RECOVERY_DONE;
8641						smp_mb();
8642					}
8643
8644					return;
8645				}
8646			}
8647		default:
8648			return;
8649		}
8650	}
8651}
8652
8653/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
8654 * scheduled on a general queue in order to prevent a dead lock.
8655 */
8656static void bnx2x_sp_rtnl_task(struct work_struct *work)
8657{
8658	struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work);
8659
8660	rtnl_lock();
8661
8662	if (!netif_running(bp->dev))
8663		goto sp_rtnl_exit;
8664
8665	/* if stop on error is defined no recovery flows should be executed */
8666#ifdef BNX2X_STOP_ON_ERROR
8667	BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined "
8668		  "so reset not done to allow debug dump,\n"
8669		  "you will need to reboot when done\n");
8670	goto sp_rtnl_not_reset;
8671#endif
8672
8673	if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) {
8674		/*
8675		 * Clear all pending SP commands as we are going to reset the
8676		 * function anyway.
8677		 */
8678		bp->sp_rtnl_state = 0;
8679		smp_mb();
8680
8681		bnx2x_parity_recover(bp);
8682
8683		goto sp_rtnl_exit;
8684	}
8685
8686	if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) {
8687		/*
8688		 * Clear all pending SP commands as we are going to reset the
8689		 * function anyway.
8690		 */
8691		bp->sp_rtnl_state = 0;
8692		smp_mb();
8693
8694		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
8695		bnx2x_nic_load(bp, LOAD_NORMAL);
8696
8697		goto sp_rtnl_exit;
8698	}
8699#ifdef BNX2X_STOP_ON_ERROR
8700sp_rtnl_not_reset:
8701#endif
8702	if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state))
8703		bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos);
8704
8705	/*
8706	 * in case of fan failure we need to reset id if the "stop on error"
8707	 * debug flag is set, since we trying to prevent permanent overheating
8708	 * damage
8709	 */
8710	if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) {
8711		DP(BNX2X_MSG_SP, "fan failure detected. Unloading driver\n");
8712		netif_device_detach(bp->dev);
8713		bnx2x_close(bp->dev);
8714	}
8715
8716sp_rtnl_exit:
8717	rtnl_unlock();
8718}
8719
8720/* end of nic load/unload */
8721
8722static void bnx2x_period_task(struct work_struct *work)
8723{
8724	struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work);
8725
8726	if (!netif_running(bp->dev))
8727		goto period_task_exit;
8728
8729	if (CHIP_REV_IS_SLOW(bp)) {
8730		BNX2X_ERR("period task called on emulation, ignoring\n");
8731		goto period_task_exit;
8732	}
8733
8734	bnx2x_acquire_phy_lock(bp);
8735	/*
8736	 * The barrier is needed to ensure the ordering between the writing to
8737	 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
8738	 * the reading here.
8739	 */
8740	smp_mb();
8741	if (bp->port.pmf) {
8742		bnx2x_period_func(&bp->link_params, &bp->link_vars);
8743
8744		/* Re-queue task in 1 sec */
8745		queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ);
8746	}
8747
8748	bnx2x_release_phy_lock(bp);
8749period_task_exit:
8750	return;
8751}
8752
8753/*
8754 * Init service functions
8755 */
8756
8757static u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
8758{
8759	u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0;
8760	u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base;
8761	return base + (BP_ABS_FUNC(bp)) * stride;
8762}
8763
8764static void bnx2x_undi_int_disable_e1h(struct bnx2x *bp)
8765{
8766	u32 reg = bnx2x_get_pretend_reg(bp);
8767
8768	/* Flush all outstanding writes */
8769	mmiowb();
8770
8771	/* Pretend to be function 0 */
8772	REG_WR(bp, reg, 0);
8773	REG_RD(bp, reg);	/* Flush the GRC transaction (in the chip) */
8774
8775	/* From now we are in the "like-E1" mode */
8776	bnx2x_int_disable(bp);
8777
8778	/* Flush all outstanding writes */
8779	mmiowb();
8780
8781	/* Restore the original function */
8782	REG_WR(bp, reg, BP_ABS_FUNC(bp));
8783	REG_RD(bp, reg);
8784}
8785
8786static inline void bnx2x_undi_int_disable(struct bnx2x *bp)
8787{
8788	if (CHIP_IS_E1(bp))
8789		bnx2x_int_disable(bp);
8790	else
8791		bnx2x_undi_int_disable_e1h(bp);
8792}
8793
8794static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
8795{
8796	u32 val;
8797
8798	/* Check if there is any driver already loaded */
8799	val = REG_RD(bp, MISC_REG_UNPREPARED);
8800	if (val == 0x1) {
8801
8802		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
8803		/*
8804		 * Check if it is the UNDI driver
8805		 * UNDI driver initializes CID offset for normal bell to 0x7
8806		 */
8807		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
8808		if (val == 0x7) {
8809			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
8810			/* save our pf_num */
8811			int orig_pf_num = bp->pf_num;
8812			int port;
8813			u32 swap_en, swap_val, value;
8814
8815			/* clear the UNDI indication */
8816			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
8817
8818			BNX2X_DEV_INFO("UNDI is active! reset device\n");
8819
8820			/* try unload UNDI on port 0 */
8821			bp->pf_num = 0;
8822			bp->fw_seq =
8823			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
8824				DRV_MSG_SEQ_NUMBER_MASK);
8825			reset_code = bnx2x_fw_command(bp, reset_code, 0);
8826
8827			/* if UNDI is loaded on the other port */
8828			if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
8829
8830				/* send "DONE" for previous unload */
8831				bnx2x_fw_command(bp,
8832						 DRV_MSG_CODE_UNLOAD_DONE, 0);
8833
8834				/* unload UNDI on port 1 */
8835				bp->pf_num = 1;
8836				bp->fw_seq =
8837			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
8838					DRV_MSG_SEQ_NUMBER_MASK);
8839				reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
8840
8841				bnx2x_fw_command(bp, reset_code, 0);
8842			}
8843
8844			bnx2x_undi_int_disable(bp);
8845			port = BP_PORT(bp);
8846
8847			/* close input traffic and wait for it */
8848			/* Do not rcv packets to BRB */
8849			REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_DRV_MASK :
8850					   NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
8851			/* Do not direct rcv packets that are not for MCP to
8852			 * the BRB */
8853			REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
8854					   NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
8855			/* clear AEU */
8856			REG_WR(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
8857					   MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
8858			msleep(10);
8859
8860			/* save NIG port swap info */
8861			swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
8862			swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
8863			/* reset device */
8864			REG_WR(bp,
8865			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
8866			       0xd3ffffff);
8867
8868			value = 0x1400;
8869			if (CHIP_IS_E3(bp)) {
8870				value |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
8871				value |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
8872			}
8873
8874			REG_WR(bp,
8875			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
8876			       value);
8877
8878			/* take the NIG out of reset and restore swap values */
8879			REG_WR(bp,
8880			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
8881			       MISC_REGISTERS_RESET_REG_1_RST_NIG);
8882			REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
8883			REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
8884
8885			/* send unload done to the MCP */
8886			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
8887
8888			/* restore our func and fw_seq */
8889			bp->pf_num = orig_pf_num;
8890			bp->fw_seq =
8891			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
8892				DRV_MSG_SEQ_NUMBER_MASK);
8893		}
8894
8895		/* now it's safe to release the lock */
8896		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
8897	}
8898}
8899
8900static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
8901{
8902	u32 val, val2, val3, val4, id, boot_mode;
8903	u16 pmc;
8904
8905	/* Get the chip revision id and number. */
8906	/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
8907	val = REG_RD(bp, MISC_REG_CHIP_NUM);
8908	id = ((val & 0xffff) << 16);
8909	val = REG_RD(bp, MISC_REG_CHIP_REV);
8910	id |= ((val & 0xf) << 12);
8911	val = REG_RD(bp, MISC_REG_CHIP_METAL);
8912	id |= ((val & 0xff) << 4);
8913	val = REG_RD(bp, MISC_REG_BOND_ID);
8914	id |= (val & 0xf);
8915	bp->common.chip_id = id;
8916
8917	/* Set doorbell size */
8918	bp->db_size = (1 << BNX2X_DB_SHIFT);
8919
8920	if (!CHIP_IS_E1x(bp)) {
8921		val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR);
8922		if ((val & 1) == 0)
8923			val = REG_RD(bp, MISC_REG_PORT4MODE_EN);
8924		else
8925			val = (val >> 1) & 1;
8926		BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" :
8927						       "2_PORT_MODE");
8928		bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE :
8929						 CHIP_2_PORT_MODE;
8930
8931		if (CHIP_MODE_IS_4_PORT(bp))
8932			bp->pfid = (bp->pf_num >> 1);	/* 0..3 */
8933		else
8934			bp->pfid = (bp->pf_num & 0x6);	/* 0, 2, 4, 6 */
8935	} else {
8936		bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */
8937		bp->pfid = bp->pf_num;			/* 0..7 */
8938	}
8939
8940	bp->link_params.chip_id = bp->common.chip_id;
8941	BNX2X_DEV_INFO("chip ID is 0x%x\n", id);
8942
8943	val = (REG_RD(bp, 0x2874) & 0x55);
8944	if ((bp->common.chip_id & 0x1) ||
8945	    (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) {
8946		bp->flags |= ONE_PORT_FLAG;
8947		BNX2X_DEV_INFO("single port device\n");
8948	}
8949
8950	val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4);
8951	bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE <<
8952				 (val & MCPR_NVM_CFG4_FLASH_SIZE));
8953	BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
8954		       bp->common.flash_size, bp->common.flash_size);
8955
8956	bnx2x_init_shmem(bp);
8957
8958
8959
8960	bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ?
8961					MISC_REG_GENERIC_CR_1 :
8962					MISC_REG_GENERIC_CR_0));
8963
8964	bp->link_params.shmem_base = bp->common.shmem_base;
8965	bp->link_params.shmem2_base = bp->common.shmem2_base;
8966	BNX2X_DEV_INFO("shmem offset 0x%x  shmem2 offset 0x%x\n",
8967		       bp->common.shmem_base, bp->common.shmem2_base);
8968
8969	if (!bp->common.shmem_base) {
8970		BNX2X_DEV_INFO("MCP not active\n");
8971		bp->flags |= NO_MCP_FLAG;
8972		return;
8973	}
8974
8975	bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
8976	BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
8977
8978	bp->link_params.hw_led_mode = ((bp->common.hw_config &
8979					SHARED_HW_CFG_LED_MODE_MASK) >>
8980				       SHARED_HW_CFG_LED_MODE_SHIFT);
8981
8982	bp->link_params.feature_config_flags = 0;
8983	val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
8984	if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
8985		bp->link_params.feature_config_flags |=
8986				FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
8987	else
8988		bp->link_params.feature_config_flags &=
8989				~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
8990
8991	val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
8992	bp->common.bc_ver = val;
8993	BNX2X_DEV_INFO("bc_ver %X\n", val);
8994	if (val < BNX2X_BC_VER) {
8995		/* for now only warn
8996		 * later we might need to enforce this */
8997		BNX2X_ERR("This driver needs bc_ver %X but found %X, "
8998			  "please upgrade BC\n", BNX2X_BC_VER, val);
8999	}
9000	bp->link_params.feature_config_flags |=
9001				(val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
9002				FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
9003
9004	bp->link_params.feature_config_flags |=
9005		(val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
9006		FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
9007
9008	bp->link_params.feature_config_flags |=
9009		(val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ?
9010		FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0;
9011	bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ?
9012			BC_SUPPORTS_PFC_STATS : 0;
9013
9014	boot_mode = SHMEM_RD(bp,
9015			dev_info.port_feature_config[BP_PORT(bp)].mba_config) &
9016			PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK;
9017	switch (boot_mode) {
9018	case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE:
9019		bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE;
9020		break;
9021	case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB:
9022		bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI;
9023		break;
9024	case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT:
9025		bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE;
9026		break;
9027	case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE:
9028		bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE;
9029		break;
9030	}
9031
9032	pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
9033	bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
9034
9035	BNX2X_DEV_INFO("%sWoL capable\n",
9036		       (bp->flags & NO_WOL_FLAG) ? "not " : "");
9037
9038	val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
9039	val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
9040	val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
9041	val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
9042
9043	dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n",
9044		 val, val2, val3, val4);
9045}
9046
9047#define IGU_FID(val)	GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
9048#define IGU_VEC(val)	GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
9049
9050static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
9051{
9052	int pfid = BP_FUNC(bp);
9053	int igu_sb_id;
9054	u32 val;
9055	u8 fid, igu_sb_cnt = 0;
9056
9057	bp->igu_base_sb = 0xff;
9058	if (CHIP_INT_MODE_IS_BC(bp)) {
9059		int vn = BP_VN(bp);
9060		igu_sb_cnt = bp->igu_sb_cnt;
9061		bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
9062			FP_SB_MAX_E1x;
9063
9064		bp->igu_dsb_id =  E1HVN_MAX * FP_SB_MAX_E1x +
9065			(CHIP_MODE_IS_4_PORT(bp) ? pfid : vn);
9066
9067		return;
9068	}
9069
9070	/* IGU in normal mode - read CAM */
9071	for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE;
9072	     igu_sb_id++) {
9073		val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
9074		if (!(val & IGU_REG_MAPPING_MEMORY_VALID))
9075			continue;
9076		fid = IGU_FID(val);
9077		if ((fid & IGU_FID_ENCODE_IS_PF)) {
9078			if ((fid & IGU_FID_PF_NUM_MASK) != pfid)
9079				continue;
9080			if (IGU_VEC(val) == 0)
9081				/* default status block */
9082				bp->igu_dsb_id = igu_sb_id;
9083			else {
9084				if (bp->igu_base_sb == 0xff)
9085					bp->igu_base_sb = igu_sb_id;
9086				igu_sb_cnt++;
9087			}
9088		}
9089	}
9090
9091#ifdef CONFIG_PCI_MSI
9092	/*
9093	 * It's expected that number of CAM entries for this functions is equal
9094	 * to the number evaluated based on the MSI-X table size. We want a
9095	 * harsh warning if these values are different!
9096	 */
9097	WARN_ON(bp->igu_sb_cnt != igu_sb_cnt);
9098#endif
9099
9100	if (igu_sb_cnt == 0)
9101		BNX2X_ERR("CAM configuration error\n");
9102}
9103
9104static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
9105						    u32 switch_cfg)
9106{
9107	int cfg_size = 0, idx, port = BP_PORT(bp);
9108
9109	/* Aggregation of supported attributes of all external phys */
9110	bp->port.supported[0] = 0;
9111	bp->port.supported[1] = 0;
9112	switch (bp->link_params.num_phys) {
9113	case 1:
9114		bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported;
9115		cfg_size = 1;
9116		break;
9117	case 2:
9118		bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported;
9119		cfg_size = 1;
9120		break;
9121	case 3:
9122		if (bp->link_params.multi_phy_config &
9123		    PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
9124			bp->port.supported[1] =
9125				bp->link_params.phy[EXT_PHY1].supported;
9126			bp->port.supported[0] =
9127				bp->link_params.phy[EXT_PHY2].supported;
9128		} else {
9129			bp->port.supported[0] =
9130				bp->link_params.phy[EXT_PHY1].supported;
9131			bp->port.supported[1] =
9132				bp->link_params.phy[EXT_PHY2].supported;
9133		}
9134		cfg_size = 2;
9135		break;
9136	}
9137
9138	if (!(bp->port.supported[0] || bp->port.supported[1])) {
9139		BNX2X_ERR("NVRAM config error. BAD phy config."
9140			  "PHY1 config 0x%x, PHY2 config 0x%x\n",
9141			   SHMEM_RD(bp,
9142			   dev_info.port_hw_config[port].external_phy_config),
9143			   SHMEM_RD(bp,
9144			   dev_info.port_hw_config[port].external_phy_config2));
9145			return;
9146	}
9147
9148	if (CHIP_IS_E3(bp))
9149		bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR);
9150	else {
9151		switch (switch_cfg) {
9152		case SWITCH_CFG_1G:
9153			bp->port.phy_addr = REG_RD(
9154				bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10);
9155			break;
9156		case SWITCH_CFG_10G:
9157			bp->port.phy_addr = REG_RD(
9158				bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18);
9159			break;
9160		default:
9161			BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
9162				  bp->port.link_config[0]);
9163			return;
9164		}
9165	}
9166	BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
9167	/* mask what we support according to speed_cap_mask per configuration */
9168	for (idx = 0; idx < cfg_size; idx++) {
9169		if (!(bp->link_params.speed_cap_mask[idx] &
9170				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
9171			bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half;
9172
9173		if (!(bp->link_params.speed_cap_mask[idx] &
9174				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
9175			bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full;
9176
9177		if (!(bp->link_params.speed_cap_mask[idx] &
9178				PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
9179			bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half;
9180
9181		if (!(bp->link_params.speed_cap_mask[idx] &
9182				PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
9183			bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full;
9184
9185		if (!(bp->link_params.speed_cap_mask[idx] &
9186					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
9187			bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half |
9188						     SUPPORTED_1000baseT_Full);
9189
9190		if (!(bp->link_params.speed_cap_mask[idx] &
9191					PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
9192			bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full;
9193
9194		if (!(bp->link_params.speed_cap_mask[idx] &
9195					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
9196			bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full;
9197
9198	}
9199
9200	BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0],
9201		       bp->port.supported[1]);
9202}
9203
9204static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
9205{
9206	u32 link_config, idx, cfg_size = 0;
9207	bp->port.advertising[0] = 0;
9208	bp->port.advertising[1] = 0;
9209	switch (bp->link_params.num_phys) {
9210	case 1:
9211	case 2:
9212		cfg_size = 1;
9213		break;
9214	case 3:
9215		cfg_size = 2;
9216		break;
9217	}
9218	for (idx = 0; idx < cfg_size; idx++) {
9219		bp->link_params.req_duplex[idx] = DUPLEX_FULL;
9220		link_config = bp->port.link_config[idx];
9221		switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
9222		case PORT_FEATURE_LINK_SPEED_AUTO:
9223			if (bp->port.supported[idx] & SUPPORTED_Autoneg) {
9224				bp->link_params.req_line_speed[idx] =
9225					SPEED_AUTO_NEG;
9226				bp->port.advertising[idx] |=
9227					bp->port.supported[idx];
9228			} else {
9229				/* force 10G, no AN */
9230				bp->link_params.req_line_speed[idx] =
9231					SPEED_10000;
9232				bp->port.advertising[idx] |=
9233					(ADVERTISED_10000baseT_Full |
9234					 ADVERTISED_FIBRE);
9235				continue;
9236			}
9237			break;
9238
9239		case PORT_FEATURE_LINK_SPEED_10M_FULL:
9240			if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) {
9241				bp->link_params.req_line_speed[idx] =
9242					SPEED_10;
9243				bp->port.advertising[idx] |=
9244					(ADVERTISED_10baseT_Full |
9245					 ADVERTISED_TP);
9246			} else {
9247				BNX2X_ERR("NVRAM config error. "
9248					    "Invalid link_config 0x%x"
9249					    "  speed_cap_mask 0x%x\n",
9250					    link_config,
9251				    bp->link_params.speed_cap_mask[idx]);
9252				return;
9253			}
9254			break;
9255
9256		case PORT_FEATURE_LINK_SPEED_10M_HALF:
9257			if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) {
9258				bp->link_params.req_line_speed[idx] =
9259					SPEED_10;
9260				bp->link_params.req_duplex[idx] =
9261					DUPLEX_HALF;
9262				bp->port.advertising[idx] |=
9263					(ADVERTISED_10baseT_Half |
9264					 ADVERTISED_TP);
9265			} else {
9266				BNX2X_ERR("NVRAM config error. "
9267					    "Invalid link_config 0x%x"
9268					    "  speed_cap_mask 0x%x\n",
9269					    link_config,
9270					  bp->link_params.speed_cap_mask[idx]);
9271				return;
9272			}
9273			break;
9274
9275		case PORT_FEATURE_LINK_SPEED_100M_FULL:
9276			if (bp->port.supported[idx] &
9277			    SUPPORTED_100baseT_Full) {
9278				bp->link_params.req_line_speed[idx] =
9279					SPEED_100;
9280				bp->port.advertising[idx] |=
9281					(ADVERTISED_100baseT_Full |
9282					 ADVERTISED_TP);
9283			} else {
9284				BNX2X_ERR("NVRAM config error. "
9285					    "Invalid link_config 0x%x"
9286					    "  speed_cap_mask 0x%x\n",
9287					    link_config,
9288					  bp->link_params.speed_cap_mask[idx]);
9289				return;
9290			}
9291			break;
9292
9293		case PORT_FEATURE_LINK_SPEED_100M_HALF:
9294			if (bp->port.supported[idx] &
9295			    SUPPORTED_100baseT_Half) {
9296				bp->link_params.req_line_speed[idx] =
9297								SPEED_100;
9298				bp->link_params.req_duplex[idx] =
9299								DUPLEX_HALF;
9300				bp->port.advertising[idx] |=
9301					(ADVERTISED_100baseT_Half |
9302					 ADVERTISED_TP);
9303			} else {
9304				BNX2X_ERR("NVRAM config error. "
9305				    "Invalid link_config 0x%x"
9306				    "  speed_cap_mask 0x%x\n",
9307				    link_config,
9308				    bp->link_params.speed_cap_mask[idx]);
9309				return;
9310			}
9311			break;
9312
9313		case PORT_FEATURE_LINK_SPEED_1G:
9314			if (bp->port.supported[idx] &
9315			    SUPPORTED_1000baseT_Full) {
9316				bp->link_params.req_line_speed[idx] =
9317					SPEED_1000;
9318				bp->port.advertising[idx] |=
9319					(ADVERTISED_1000baseT_Full |
9320					 ADVERTISED_TP);
9321			} else {
9322				BNX2X_ERR("NVRAM config error. "
9323				    "Invalid link_config 0x%x"
9324				    "  speed_cap_mask 0x%x\n",
9325				    link_config,
9326				    bp->link_params.speed_cap_mask[idx]);
9327				return;
9328			}
9329			break;
9330
9331		case PORT_FEATURE_LINK_SPEED_2_5G:
9332			if (bp->port.supported[idx] &
9333			    SUPPORTED_2500baseX_Full) {
9334				bp->link_params.req_line_speed[idx] =
9335					SPEED_2500;
9336				bp->port.advertising[idx] |=
9337					(ADVERTISED_2500baseX_Full |
9338						ADVERTISED_TP);
9339			} else {
9340				BNX2X_ERR("NVRAM config error. "
9341				    "Invalid link_config 0x%x"
9342				    "  speed_cap_mask 0x%x\n",
9343				    link_config,
9344				    bp->link_params.speed_cap_mask[idx]);
9345				return;
9346			}
9347			break;
9348
9349		case PORT_FEATURE_LINK_SPEED_10G_CX4:
9350			if (bp->port.supported[idx] &
9351			    SUPPORTED_10000baseT_Full) {
9352				bp->link_params.req_line_speed[idx] =
9353					SPEED_10000;
9354				bp->port.advertising[idx] |=
9355					(ADVERTISED_10000baseT_Full |
9356						ADVERTISED_FIBRE);
9357			} else {
9358				BNX2X_ERR("NVRAM config error. "
9359				    "Invalid link_config 0x%x"
9360				    "  speed_cap_mask 0x%x\n",
9361				    link_config,
9362				    bp->link_params.speed_cap_mask[idx]);
9363				return;
9364			}
9365			break;
9366		case PORT_FEATURE_LINK_SPEED_20G:
9367			bp->link_params.req_line_speed[idx] = SPEED_20000;
9368
9369			break;
9370		default:
9371			BNX2X_ERR("NVRAM config error. "
9372				  "BAD link speed link_config 0x%x\n",
9373				  link_config);
9374				bp->link_params.req_line_speed[idx] =
9375							SPEED_AUTO_NEG;
9376				bp->port.advertising[idx] =
9377						bp->port.supported[idx];
9378			break;
9379		}
9380
9381		bp->link_params.req_flow_ctrl[idx] = (link_config &
9382					 PORT_FEATURE_FLOW_CONTROL_MASK);
9383		if ((bp->link_params.req_flow_ctrl[idx] ==
9384		     BNX2X_FLOW_CTRL_AUTO) &&
9385		    !(bp->port.supported[idx] & SUPPORTED_Autoneg)) {
9386			bp->link_params.req_flow_ctrl[idx] =
9387				BNX2X_FLOW_CTRL_NONE;
9388		}
9389
9390		BNX2X_DEV_INFO("req_line_speed %d  req_duplex %d req_flow_ctrl"
9391			       " 0x%x advertising 0x%x\n",
9392			       bp->link_params.req_line_speed[idx],
9393			       bp->link_params.req_duplex[idx],
9394			       bp->link_params.req_flow_ctrl[idx],
9395			       bp->port.advertising[idx]);
9396	}
9397}
9398
9399static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
9400{
9401	mac_hi = cpu_to_be16(mac_hi);
9402	mac_lo = cpu_to_be32(mac_lo);
9403	memcpy(mac_buf, &mac_hi, sizeof(mac_hi));
9404	memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo));
9405}
9406
9407static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
9408{
9409	int port = BP_PORT(bp);
9410	u32 config;
9411	u32 ext_phy_type, ext_phy_config;
9412
9413	bp->link_params.bp = bp;
9414	bp->link_params.port = port;
9415
9416	bp->link_params.lane_config =
9417		SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
9418
9419	bp->link_params.speed_cap_mask[0] =
9420		SHMEM_RD(bp,
9421			 dev_info.port_hw_config[port].speed_capability_mask);
9422	bp->link_params.speed_cap_mask[1] =
9423		SHMEM_RD(bp,
9424			 dev_info.port_hw_config[port].speed_capability_mask2);
9425	bp->port.link_config[0] =
9426		SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
9427
9428	bp->port.link_config[1] =
9429		SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2);
9430
9431	bp->link_params.multi_phy_config =
9432		SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config);
9433	/* If the device is capable of WoL, set the default state according
9434	 * to the HW
9435	 */
9436	config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
9437	bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
9438		   (config & PORT_FEATURE_WOL_ENABLED));
9439
9440	BNX2X_DEV_INFO("lane_config 0x%08x  "
9441		       "speed_cap_mask0 0x%08x  link_config0 0x%08x\n",
9442		       bp->link_params.lane_config,
9443		       bp->link_params.speed_cap_mask[0],
9444		       bp->port.link_config[0]);
9445
9446	bp->link_params.switch_cfg = (bp->port.link_config[0] &
9447				      PORT_FEATURE_CONNECTED_SWITCH_MASK);
9448	bnx2x_phy_probe(&bp->link_params);
9449	bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
9450
9451	bnx2x_link_settings_requested(bp);
9452
9453	/*
9454	 * If connected directly, work with the internal PHY, otherwise, work
9455	 * with the external PHY
9456	 */
9457	ext_phy_config =
9458		SHMEM_RD(bp,
9459			 dev_info.port_hw_config[port].external_phy_config);
9460	ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
9461	if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
9462		bp->mdio.prtad = bp->port.phy_addr;
9463
9464	else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
9465		 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
9466		bp->mdio.prtad =
9467			XGXS_EXT_PHY_ADDR(ext_phy_config);
9468
9469	/*
9470	 * Check if hw lock is required to access MDC/MDIO bus to the PHY(s)
9471	 * In MF mode, it is set to cover self test cases
9472	 */
9473	if (IS_MF(bp))
9474		bp->port.need_hw_lock = 1;
9475	else
9476		bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
9477							bp->common.shmem_base,
9478							bp->common.shmem2_base);
9479}
9480
9481#ifdef BCM_CNIC
9482void bnx2x_get_iscsi_info(struct bnx2x *bp)
9483{
9484	int port = BP_PORT(bp);
9485
9486	u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
9487				drv_lic_key[port].max_iscsi_conn);
9488
9489	/* Get the number of maximum allowed iSCSI connections */
9490	bp->cnic_eth_dev.max_iscsi_conn =
9491		(max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >>
9492		BNX2X_MAX_ISCSI_INIT_CONN_SHIFT;
9493
9494	BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n",
9495		       bp->cnic_eth_dev.max_iscsi_conn);
9496
9497	/*
9498	 * If maximum allowed number of connections is zero -
9499	 * disable the feature.
9500	 */
9501	if (!bp->cnic_eth_dev.max_iscsi_conn)
9502		bp->flags |= NO_ISCSI_FLAG;
9503}
9504
9505static void __devinit bnx2x_get_fcoe_info(struct bnx2x *bp)
9506{
9507	int port = BP_PORT(bp);
9508	int func = BP_ABS_FUNC(bp);
9509
9510	u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
9511				drv_lic_key[port].max_fcoe_conn);
9512
9513	/* Get the number of maximum allowed FCoE connections */
9514	bp->cnic_eth_dev.max_fcoe_conn =
9515		(max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >>
9516		BNX2X_MAX_FCOE_INIT_CONN_SHIFT;
9517
9518	/* Read the WWN: */
9519	if (!IS_MF(bp)) {
9520		/* Port info */
9521		bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
9522			SHMEM_RD(bp,
9523				dev_info.port_hw_config[port].
9524				 fcoe_wwn_port_name_upper);
9525		bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
9526			SHMEM_RD(bp,
9527				dev_info.port_hw_config[port].
9528				 fcoe_wwn_port_name_lower);
9529
9530		/* Node info */
9531		bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
9532			SHMEM_RD(bp,
9533				dev_info.port_hw_config[port].
9534				 fcoe_wwn_node_name_upper);
9535		bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
9536			SHMEM_RD(bp,
9537				dev_info.port_hw_config[port].
9538				 fcoe_wwn_node_name_lower);
9539	} else if (!IS_MF_SD(bp)) {
9540		u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
9541
9542		/*
9543		 * Read the WWN info only if the FCoE feature is enabled for
9544		 * this function.
9545		 */
9546		if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
9547			/* Port info */
9548			bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
9549				MF_CFG_RD(bp, func_ext_config[func].
9550						fcoe_wwn_port_name_upper);
9551			bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
9552				MF_CFG_RD(bp, func_ext_config[func].
9553						fcoe_wwn_port_name_lower);
9554
9555			/* Node info */
9556			bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
9557				MF_CFG_RD(bp, func_ext_config[func].
9558						fcoe_wwn_node_name_upper);
9559			bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
9560				MF_CFG_RD(bp, func_ext_config[func].
9561						fcoe_wwn_node_name_lower);
9562		}
9563	}
9564
9565	BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn);
9566
9567	/*
9568	 * If maximum allowed number of connections is zero -
9569	 * disable the feature.
9570	 */
9571	if (!bp->cnic_eth_dev.max_fcoe_conn)
9572		bp->flags |= NO_FCOE_FLAG;
9573}
9574
9575static void __devinit bnx2x_get_cnic_info(struct bnx2x *bp)
9576{
9577	/*
9578	 * iSCSI may be dynamically disabled but reading
9579	 * info here we will decrease memory usage by driver
9580	 * if the feature is disabled for good
9581	 */
9582	bnx2x_get_iscsi_info(bp);
9583	bnx2x_get_fcoe_info(bp);
9584}
9585#endif
9586
9587static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
9588{
9589	u32 val, val2;
9590	int func = BP_ABS_FUNC(bp);
9591	int port = BP_PORT(bp);
9592#ifdef BCM_CNIC
9593	u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac;
9594	u8 *fip_mac = bp->fip_mac;
9595#endif
9596
9597	/* Zero primary MAC configuration */
9598	memset(bp->dev->dev_addr, 0, ETH_ALEN);
9599
9600	if (BP_NOMCP(bp)) {
9601		BNX2X_ERROR("warning: random MAC workaround active\n");
9602		random_ether_addr(bp->dev->dev_addr);
9603	} else if (IS_MF(bp)) {
9604		val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
9605		val = MF_CFG_RD(bp, func_mf_config[func].mac_lower);
9606		if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
9607		    (val != FUNC_MF_CFG_LOWERMAC_DEFAULT))
9608			bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
9609
9610#ifdef BCM_CNIC
9611		/*
9612		 * iSCSI and FCoE NPAR MACs: if there is no either iSCSI or
9613		 * FCoE MAC then the appropriate feature should be disabled.
9614		 */
9615		if (IS_MF_SI(bp)) {
9616			u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
9617			if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
9618				val2 = MF_CFG_RD(bp, func_ext_config[func].
9619						     iscsi_mac_addr_upper);
9620				val = MF_CFG_RD(bp, func_ext_config[func].
9621						    iscsi_mac_addr_lower);
9622				bnx2x_set_mac_buf(iscsi_mac, val, val2);
9623				BNX2X_DEV_INFO("Read iSCSI MAC: %pM\n",
9624					       iscsi_mac);
9625			} else
9626				bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
9627
9628			if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
9629				val2 = MF_CFG_RD(bp, func_ext_config[func].
9630						     fcoe_mac_addr_upper);
9631				val = MF_CFG_RD(bp, func_ext_config[func].
9632						    fcoe_mac_addr_lower);
9633				bnx2x_set_mac_buf(fip_mac, val, val2);
9634				BNX2X_DEV_INFO("Read FCoE L2 MAC: %pM\n",
9635					       fip_mac);
9636
9637			} else
9638				bp->flags |= NO_FCOE_FLAG;
9639		} else { /* SD mode */
9640			if (BNX2X_IS_MF_PROTOCOL_ISCSI(bp)) {
9641				/* use primary mac as iscsi mac */
9642				memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN);
9643				/* Zero primary MAC configuration */
9644				memset(bp->dev->dev_addr, 0, ETH_ALEN);
9645
9646				BNX2X_DEV_INFO("SD ISCSI MODE\n");
9647				BNX2X_DEV_INFO("Read iSCSI MAC: %pM\n",
9648					       iscsi_mac);
9649			}
9650		}
9651#endif
9652	} else {
9653		/* in SF read MACs from port configuration */
9654		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
9655		val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
9656		bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
9657
9658#ifdef BCM_CNIC
9659		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
9660				    iscsi_mac_upper);
9661		val = SHMEM_RD(bp, dev_info.port_hw_config[port].
9662				   iscsi_mac_lower);
9663		bnx2x_set_mac_buf(iscsi_mac, val, val2);
9664
9665		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
9666				    fcoe_fip_mac_upper);
9667		val = SHMEM_RD(bp, dev_info.port_hw_config[port].
9668				   fcoe_fip_mac_lower);
9669		bnx2x_set_mac_buf(fip_mac, val, val2);
9670#endif
9671	}
9672
9673	memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
9674	memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
9675
9676#ifdef BCM_CNIC
9677	/* Set the FCoE MAC in MF_SD mode */
9678	if (!CHIP_IS_E1x(bp) && IS_MF_SD(bp))
9679		memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN);
9680
9681	/* Disable iSCSI if MAC configuration is
9682	 * invalid.
9683	 */
9684	if (!is_valid_ether_addr(iscsi_mac)) {
9685		bp->flags |= NO_ISCSI_FLAG;
9686		memset(iscsi_mac, 0, ETH_ALEN);
9687	}
9688
9689	/* Disable FCoE if MAC configuration is
9690	 * invalid.
9691	 */
9692	if (!is_valid_ether_addr(fip_mac)) {
9693		bp->flags |= NO_FCOE_FLAG;
9694		memset(bp->fip_mac, 0, ETH_ALEN);
9695	}
9696#endif
9697
9698	if (!bnx2x_is_valid_ether_addr(bp, bp->dev->dev_addr))
9699		dev_err(&bp->pdev->dev,
9700			"bad Ethernet MAC address configuration: "
9701			"%pM, change it manually before bringing up "
9702			"the appropriate network interface\n",
9703			bp->dev->dev_addr);
9704}
9705
9706static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
9707{
9708	int /*abs*/func = BP_ABS_FUNC(bp);
9709	int vn;
9710	u32 val = 0;
9711	int rc = 0;
9712
9713	bnx2x_get_common_hwinfo(bp);
9714
9715	/*
9716	 * initialize IGU parameters
9717	 */
9718	if (CHIP_IS_E1x(bp)) {
9719		bp->common.int_block = INT_BLOCK_HC;
9720
9721		bp->igu_dsb_id = DEF_SB_IGU_ID;
9722		bp->igu_base_sb = 0;
9723	} else {
9724		bp->common.int_block = INT_BLOCK_IGU;
9725
9726		/* do not allow device reset during IGU info preocessing */
9727		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
9728
9729		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
9730
9731		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
9732			int tout = 5000;
9733
9734			BNX2X_DEV_INFO("FORCING Normal Mode\n");
9735
9736			val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
9737			REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val);
9738			REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f);
9739
9740			while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
9741				tout--;
9742				usleep_range(1000, 1000);
9743			}
9744
9745			if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
9746				dev_err(&bp->pdev->dev,
9747					"FORCING Normal Mode failed!!!\n");
9748				return -EPERM;
9749			}
9750		}
9751
9752		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
9753			BNX2X_DEV_INFO("IGU Backward Compatible Mode\n");
9754			bp->common.int_block |= INT_BLOCK_MODE_BW_COMP;
9755		} else
9756			BNX2X_DEV_INFO("IGU Normal Mode\n");
9757
9758		bnx2x_get_igu_cam_info(bp);
9759
9760		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
9761	}
9762
9763	/*
9764	 * set base FW non-default (fast path) status block id, this value is
9765	 * used to initialize the fw_sb_id saved on the fp/queue structure to
9766	 * determine the id used by the FW.
9767	 */
9768	if (CHIP_IS_E1x(bp))
9769		bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp);
9770	else /*
9771	      * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of
9772	      * the same queue are indicated on the same IGU SB). So we prefer
9773	      * FW and IGU SBs to be the same value.
9774	      */
9775		bp->base_fw_ndsb = bp->igu_base_sb;
9776
9777	BNX2X_DEV_INFO("igu_dsb_id %d  igu_base_sb %d  igu_sb_cnt %d\n"
9778		       "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb,
9779		       bp->igu_sb_cnt, bp->base_fw_ndsb);
9780
9781	/*
9782	 * Initialize MF configuration
9783	 */
9784
9785	bp->mf_ov = 0;
9786	bp->mf_mode = 0;
9787	vn = BP_VN(bp);
9788
9789	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
9790		BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
9791			       bp->common.shmem2_base, SHMEM2_RD(bp, size),
9792			      (u32)offsetof(struct shmem2_region, mf_cfg_addr));
9793
9794		if (SHMEM2_HAS(bp, mf_cfg_addr))
9795			bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr);
9796		else
9797			bp->common.mf_cfg_base = bp->common.shmem_base +
9798				offsetof(struct shmem_region, func_mb) +
9799				E1H_FUNC_MAX * sizeof(struct drv_func_mb);
9800		/*
9801		 * get mf configuration:
9802		 * 1. existence of MF configuration
9803		 * 2. MAC address must be legal (check only upper bytes)
9804		 *    for  Switch-Independent mode;
9805		 *    OVLAN must be legal for Switch-Dependent mode
9806		 * 3. SF_MODE configures specific MF mode
9807		 */
9808		if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
9809			/* get mf configuration */
9810			val = SHMEM_RD(bp,
9811				       dev_info.shared_feature_config.config);
9812			val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK;
9813
9814			switch (val) {
9815			case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
9816				val = MF_CFG_RD(bp, func_mf_config[func].
9817						mac_upper);
9818				/* check for legal mac (upper bytes)*/
9819				if (val != 0xffff) {
9820					bp->mf_mode = MULTI_FUNCTION_SI;
9821					bp->mf_config[vn] = MF_CFG_RD(bp,
9822						   func_mf_config[func].config);
9823				} else
9824					BNX2X_DEV_INFO("illegal MAC address "
9825						       "for SI\n");
9826				break;
9827			case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
9828				/* get OV configuration */
9829				val = MF_CFG_RD(bp,
9830					func_mf_config[FUNC_0].e1hov_tag);
9831				val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
9832
9833				if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
9834					bp->mf_mode = MULTI_FUNCTION_SD;
9835					bp->mf_config[vn] = MF_CFG_RD(bp,
9836						func_mf_config[func].config);
9837				} else
9838					BNX2X_DEV_INFO("illegal OV for SD\n");
9839				break;
9840			default:
9841				/* Unknown configuration: reset mf_config */
9842				bp->mf_config[vn] = 0;
9843				BNX2X_DEV_INFO("unkown MF mode 0x%x\n", val);
9844			}
9845		}
9846
9847		BNX2X_DEV_INFO("%s function mode\n",
9848			       IS_MF(bp) ? "multi" : "single");
9849
9850		switch (bp->mf_mode) {
9851		case MULTI_FUNCTION_SD:
9852			val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
9853			      FUNC_MF_CFG_E1HOV_TAG_MASK;
9854			if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
9855				bp->mf_ov = val;
9856				bp->path_has_ovlan = true;
9857
9858				BNX2X_DEV_INFO("MF OV for func %d is %d "
9859					       "(0x%04x)\n", func, bp->mf_ov,
9860					       bp->mf_ov);
9861			} else {
9862				dev_err(&bp->pdev->dev,
9863					"No valid MF OV for func %d, "
9864					"aborting\n", func);
9865				return -EPERM;
9866			}
9867			break;
9868		case MULTI_FUNCTION_SI:
9869			BNX2X_DEV_INFO("func %d is in MF "
9870				       "switch-independent mode\n", func);
9871			break;
9872		default:
9873			if (vn) {
9874				dev_err(&bp->pdev->dev,
9875					"VN %d is in a single function mode, "
9876					"aborting\n", vn);
9877				return -EPERM;
9878			}
9879			break;
9880		}
9881
9882		/* check if other port on the path needs ovlan:
9883		 * Since MF configuration is shared between ports
9884		 * Possible mixed modes are only
9885		 * {SF, SI} {SF, SD} {SD, SF} {SI, SF}
9886		 */
9887		if (CHIP_MODE_IS_4_PORT(bp) &&
9888		    !bp->path_has_ovlan &&
9889		    !IS_MF(bp) &&
9890		    bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
9891			u8 other_port = !BP_PORT(bp);
9892			u8 other_func = BP_PATH(bp) + 2*other_port;
9893			val = MF_CFG_RD(bp,
9894					func_mf_config[other_func].e1hov_tag);
9895			if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
9896				bp->path_has_ovlan = true;
9897		}
9898	}
9899
9900	/* adjust igu_sb_cnt to MF for E1x */
9901	if (CHIP_IS_E1x(bp) && IS_MF(bp))
9902		bp->igu_sb_cnt /= E1HVN_MAX;
9903
9904	/* port info */
9905	bnx2x_get_port_hwinfo(bp);
9906
9907	/* Get MAC addresses */
9908	bnx2x_get_mac_hwinfo(bp);
9909
9910#ifdef BCM_CNIC
9911	bnx2x_get_cnic_info(bp);
9912#endif
9913
9914	/* Get current FW pulse sequence */
9915	if (!BP_NOMCP(bp)) {
9916		int mb_idx = BP_FW_MB_IDX(bp);
9917
9918		bp->fw_drv_pulse_wr_seq =
9919				(SHMEM_RD(bp, func_mb[mb_idx].drv_pulse_mb) &
9920				 DRV_PULSE_SEQ_MASK);
9921		BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
9922	}
9923
9924	return rc;
9925}
9926
9927static void __devinit bnx2x_read_fwinfo(struct bnx2x *bp)
9928{
9929	int cnt, i, block_end, rodi;
9930	char vpd_data[BNX2X_VPD_LEN+1];
9931	char str_id_reg[VENDOR_ID_LEN+1];
9932	char str_id_cap[VENDOR_ID_LEN+1];
9933	u8 len;
9934
9935	cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_data);
9936	memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
9937
9938	if (cnt < BNX2X_VPD_LEN)
9939		goto out_not_found;
9940
9941	i = pci_vpd_find_tag(vpd_data, 0, BNX2X_VPD_LEN,
9942			     PCI_VPD_LRDT_RO_DATA);
9943	if (i < 0)
9944		goto out_not_found;
9945
9946
9947	block_end = i + PCI_VPD_LRDT_TAG_SIZE +
9948		    pci_vpd_lrdt_size(&vpd_data[i]);
9949
9950	i += PCI_VPD_LRDT_TAG_SIZE;
9951
9952	if (block_end > BNX2X_VPD_LEN)
9953		goto out_not_found;
9954
9955	rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
9956				   PCI_VPD_RO_KEYWORD_MFR_ID);
9957	if (rodi < 0)
9958		goto out_not_found;
9959
9960	len = pci_vpd_info_field_size(&vpd_data[rodi]);
9961
9962	if (len != VENDOR_ID_LEN)
9963		goto out_not_found;
9964
9965	rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
9966
9967	/* vendor specific info */
9968	snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
9969	snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL);
9970	if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) ||
9971	    !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) {
9972
9973		rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
9974						PCI_VPD_RO_KEYWORD_VENDOR0);
9975		if (rodi >= 0) {
9976			len = pci_vpd_info_field_size(&vpd_data[rodi]);
9977
9978			rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
9979
9980			if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) {
9981				memcpy(bp->fw_ver, &vpd_data[rodi], len);
9982				bp->fw_ver[len] = ' ';
9983			}
9984		}
9985		return;
9986	}
9987out_not_found:
9988	return;
9989}
9990
9991static void __devinit bnx2x_set_modes_bitmap(struct bnx2x *bp)
9992{
9993	u32 flags = 0;
9994
9995	if (CHIP_REV_IS_FPGA(bp))
9996		SET_FLAGS(flags, MODE_FPGA);
9997	else if (CHIP_REV_IS_EMUL(bp))
9998		SET_FLAGS(flags, MODE_EMUL);
9999	else
10000		SET_FLAGS(flags, MODE_ASIC);
10001
10002	if (CHIP_MODE_IS_4_PORT(bp))
10003		SET_FLAGS(flags, MODE_PORT4);
10004	else
10005		SET_FLAGS(flags, MODE_PORT2);
10006
10007	if (CHIP_IS_E2(bp))
10008		SET_FLAGS(flags, MODE_E2);
10009	else if (CHIP_IS_E3(bp)) {
10010		SET_FLAGS(flags, MODE_E3);
10011		if (CHIP_REV(bp) == CHIP_REV_Ax)
10012			SET_FLAGS(flags, MODE_E3_A0);
10013		else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/
10014			SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3);
10015	}
10016
10017	if (IS_MF(bp)) {
10018		SET_FLAGS(flags, MODE_MF);
10019		switch (bp->mf_mode) {
10020		case MULTI_FUNCTION_SD:
10021			SET_FLAGS(flags, MODE_MF_SD);
10022			break;
10023		case MULTI_FUNCTION_SI:
10024			SET_FLAGS(flags, MODE_MF_SI);
10025			break;
10026		}
10027	} else
10028		SET_FLAGS(flags, MODE_SF);
10029
10030#if defined(__LITTLE_ENDIAN)
10031	SET_FLAGS(flags, MODE_LITTLE_ENDIAN);
10032#else /*(__BIG_ENDIAN)*/
10033	SET_FLAGS(flags, MODE_BIG_ENDIAN);
10034#endif
10035	INIT_MODE_FLAGS(bp) = flags;
10036}
10037
10038static int __devinit bnx2x_init_bp(struct bnx2x *bp)
10039{
10040	int func;
10041	int timer_interval;
10042	int rc;
10043
10044	mutex_init(&bp->port.phy_mutex);
10045	mutex_init(&bp->fw_mb_mutex);
10046	spin_lock_init(&bp->stats_lock);
10047#ifdef BCM_CNIC
10048	mutex_init(&bp->cnic_mutex);
10049#endif
10050
10051	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
10052	INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
10053	INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task);
10054	rc = bnx2x_get_hwinfo(bp);
10055	if (rc)
10056		return rc;
10057
10058	bnx2x_set_modes_bitmap(bp);
10059
10060	rc = bnx2x_alloc_mem_bp(bp);
10061	if (rc)
10062		return rc;
10063
10064	bnx2x_read_fwinfo(bp);
10065
10066	func = BP_FUNC(bp);
10067
10068	/* need to reset chip if undi was active */
10069	if (!BP_NOMCP(bp))
10070		bnx2x_undi_unload(bp);
10071
10072	/* init fw_seq after undi_unload! */
10073	if (!BP_NOMCP(bp)) {
10074		bp->fw_seq =
10075			(SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
10076			 DRV_MSG_SEQ_NUMBER_MASK);
10077		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
10078	}
10079
10080	if (CHIP_REV_IS_FPGA(bp))
10081		dev_err(&bp->pdev->dev, "FPGA detected\n");
10082
10083	if (BP_NOMCP(bp) && (func == 0))
10084		dev_err(&bp->pdev->dev, "MCP disabled, "
10085					"must load devices in order!\n");
10086
10087	bp->multi_mode = multi_mode;
10088
10089	bp->disable_tpa = disable_tpa;
10090
10091#ifdef BCM_CNIC
10092	bp->disable_tpa |= IS_MF_ISCSI_SD(bp);
10093#endif
10094
10095	/* Set TPA flags */
10096	if (bp->disable_tpa) {
10097		bp->flags &= ~TPA_ENABLE_FLAG;
10098		bp->dev->features &= ~NETIF_F_LRO;
10099	} else {
10100		bp->flags |= TPA_ENABLE_FLAG;
10101		bp->dev->features |= NETIF_F_LRO;
10102	}
10103
10104	if (CHIP_IS_E1(bp))
10105		bp->dropless_fc = 0;
10106	else
10107		bp->dropless_fc = dropless_fc;
10108
10109	bp->mrrs = mrrs;
10110
10111	bp->tx_ring_size = MAX_TX_AVAIL;
10112
10113	/* make sure that the numbers are in the right granularity */
10114	bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
10115	bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
10116
10117	timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
10118	bp->current_interval = (poll ? poll : timer_interval);
10119
10120	init_timer(&bp->timer);
10121	bp->timer.expires = jiffies + bp->current_interval;
10122	bp->timer.data = (unsigned long) bp;
10123	bp->timer.function = bnx2x_timer;
10124
10125	bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON);
10126	bnx2x_dcbx_init_params(bp);
10127
10128#ifdef BCM_CNIC
10129	if (CHIP_IS_E1x(bp))
10130		bp->cnic_base_cl_id = FP_SB_MAX_E1x;
10131	else
10132		bp->cnic_base_cl_id = FP_SB_MAX_E2;
10133#endif
10134
10135	/* multiple tx priority */
10136	if (CHIP_IS_E1x(bp))
10137		bp->max_cos = BNX2X_MULTI_TX_COS_E1X;
10138	if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp))
10139		bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0;
10140	if (CHIP_IS_E3B0(bp))
10141		bp->max_cos = BNX2X_MULTI_TX_COS_E3B0;
10142
10143	return rc;
10144}
10145
10146
10147/****************************************************************************
10148* General service functions
10149****************************************************************************/
10150
10151/*
10152 * net_device service functions
10153 */
10154
10155/* called with rtnl_lock */
10156static int bnx2x_open(struct net_device *dev)
10157{
10158	struct bnx2x *bp = netdev_priv(dev);
10159	bool global = false;
10160	int other_engine = BP_PATH(bp) ? 0 : 1;
10161	u32 other_load_counter, load_counter;
10162
10163	netif_carrier_off(dev);
10164
10165	bnx2x_set_power_state(bp, PCI_D0);
10166
10167	other_load_counter = bnx2x_get_load_cnt(bp, other_engine);
10168	load_counter = bnx2x_get_load_cnt(bp, BP_PATH(bp));
10169
10170	/*
10171	 * If parity had happen during the unload, then attentions
10172	 * and/or RECOVERY_IN_PROGRES may still be set. In this case we
10173	 * want the first function loaded on the current engine to
10174	 * complete the recovery.
10175	 */
10176	if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
10177	    bnx2x_chk_parity_attn(bp, &global, true))
10178		do {
10179			/*
10180			 * If there are attentions and they are in a global
10181			 * blocks, set the GLOBAL_RESET bit regardless whether
10182			 * it will be this function that will complete the
10183			 * recovery or not.
10184			 */
10185			if (global)
10186				bnx2x_set_reset_global(bp);
10187
10188			/*
10189			 * Only the first function on the current engine should
10190			 * try to recover in open. In case of attentions in
10191			 * global blocks only the first in the chip should try
10192			 * to recover.
10193			 */
10194			if ((!load_counter &&
10195			     (!global || !other_load_counter)) &&
10196			    bnx2x_trylock_leader_lock(bp) &&
10197			    !bnx2x_leader_reset(bp)) {
10198				netdev_info(bp->dev, "Recovered in open\n");
10199				break;
10200			}
10201
10202			/* recovery has failed... */
10203			bnx2x_set_power_state(bp, PCI_D3hot);
10204			bp->recovery_state = BNX2X_RECOVERY_FAILED;
10205
10206			netdev_err(bp->dev, "Recovery flow hasn't been properly"
10207			" completed yet. Try again later. If u still see this"
10208			" message after a few retries then power cycle is"
10209			" required.\n");
10210
10211			return -EAGAIN;
10212		} while (0);
10213
10214	bp->recovery_state = BNX2X_RECOVERY_DONE;
10215	return bnx2x_nic_load(bp, LOAD_OPEN);
10216}
10217
10218/* called with rtnl_lock */
10219int bnx2x_close(struct net_device *dev)
10220{
10221	struct bnx2x *bp = netdev_priv(dev);
10222
10223	/* Unload the driver, release IRQs */
10224	bnx2x_nic_unload(bp, UNLOAD_CLOSE);
10225
10226	/* Power off */
10227	bnx2x_set_power_state(bp, PCI_D3hot);
10228
10229	return 0;
10230}
10231
10232static inline int bnx2x_init_mcast_macs_list(struct bnx2x *bp,
10233					 struct bnx2x_mcast_ramrod_params *p)
10234{
10235	int mc_count = netdev_mc_count(bp->dev);
10236	struct bnx2x_mcast_list_elem *mc_mac =
10237		kzalloc(sizeof(*mc_mac) * mc_count, GFP_ATOMIC);
10238	struct netdev_hw_addr *ha;
10239
10240	if (!mc_mac)
10241		return -ENOMEM;
10242
10243	INIT_LIST_HEAD(&p->mcast_list);
10244
10245	netdev_for_each_mc_addr(ha, bp->dev) {
10246		mc_mac->mac = bnx2x_mc_addr(ha);
10247		list_add_tail(&mc_mac->link, &p->mcast_list);
10248		mc_mac++;
10249	}
10250
10251	p->mcast_list_len = mc_count;
10252
10253	return 0;
10254}
10255
10256static inline void bnx2x_free_mcast_macs_list(
10257	struct bnx2x_mcast_ramrod_params *p)
10258{
10259	struct bnx2x_mcast_list_elem *mc_mac =
10260		list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem,
10261				 link);
10262
10263	WARN_ON(!mc_mac);
10264	kfree(mc_mac);
10265}
10266
10267/**
10268 * bnx2x_set_uc_list - configure a new unicast MACs list.
10269 *
10270 * @bp: driver handle
10271 *
10272 * We will use zero (0) as a MAC type for these MACs.
10273 */
10274static inline int bnx2x_set_uc_list(struct bnx2x *bp)
10275{
10276	int rc;
10277	struct net_device *dev = bp->dev;
10278	struct netdev_hw_addr *ha;
10279	struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj;
10280	unsigned long ramrod_flags = 0;
10281
10282	/* First schedule a cleanup up of old configuration */
10283	rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false);
10284	if (rc < 0) {
10285		BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc);
10286		return rc;
10287	}
10288
10289	netdev_for_each_uc_addr(ha, dev) {
10290		rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
10291				       BNX2X_UC_LIST_MAC, &ramrod_flags);
10292		if (rc < 0) {
10293			BNX2X_ERR("Failed to schedule ADD operations: %d\n",
10294				  rc);
10295			return rc;
10296		}
10297	}
10298
10299	/* Execute the pending commands */
10300	__set_bit(RAMROD_CONT, &ramrod_flags);
10301	return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */,
10302				 BNX2X_UC_LIST_MAC, &ramrod_flags);
10303}
10304
10305static inline int bnx2x_set_mc_list(struct bnx2x *bp)
10306{
10307	struct net_device *dev = bp->dev;
10308	struct bnx2x_mcast_ramrod_params rparam = {0};
10309	int rc = 0;
10310
10311	rparam.mcast_obj = &bp->mcast_obj;
10312
10313	/* first, clear all configured multicast MACs */
10314	rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
10315	if (rc < 0) {
10316		BNX2X_ERR("Failed to clear multicast "
10317			  "configuration: %d\n", rc);
10318		return rc;
10319	}
10320
10321	/* then, configure a new MACs list */
10322	if (netdev_mc_count(dev)) {
10323		rc = bnx2x_init_mcast_macs_list(bp, &rparam);
10324		if (rc) {
10325			BNX2X_ERR("Failed to create multicast MACs "
10326				  "list: %d\n", rc);
10327			return rc;
10328		}
10329
10330		/* Now add the new MACs */
10331		rc = bnx2x_config_mcast(bp, &rparam,
10332					BNX2X_MCAST_CMD_ADD);
10333		if (rc < 0)
10334			BNX2X_ERR("Failed to set a new multicast "
10335				  "configuration: %d\n", rc);
10336
10337		bnx2x_free_mcast_macs_list(&rparam);
10338	}
10339
10340	return rc;
10341}
10342
10343
10344/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */
10345void bnx2x_set_rx_mode(struct net_device *dev)
10346{
10347	struct bnx2x *bp = netdev_priv(dev);
10348	u32 rx_mode = BNX2X_RX_MODE_NORMAL;
10349
10350	if (bp->state != BNX2X_STATE_OPEN) {
10351		DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
10352		return;
10353	}
10354
10355	DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags);
10356
10357	if (dev->flags & IFF_PROMISC)
10358		rx_mode = BNX2X_RX_MODE_PROMISC;
10359	else if ((dev->flags & IFF_ALLMULTI) ||
10360		 ((netdev_mc_count(dev) > BNX2X_MAX_MULTICAST) &&
10361		  CHIP_IS_E1(bp)))
10362		rx_mode = BNX2X_RX_MODE_ALLMULTI;
10363	else {
10364		/* some multicasts */
10365		if (bnx2x_set_mc_list(bp) < 0)
10366			rx_mode = BNX2X_RX_MODE_ALLMULTI;
10367
10368		if (bnx2x_set_uc_list(bp) < 0)
10369			rx_mode = BNX2X_RX_MODE_PROMISC;
10370	}
10371
10372	bp->rx_mode = rx_mode;
10373#ifdef BCM_CNIC
10374	/* handle ISCSI SD mode */
10375	if (IS_MF_ISCSI_SD(bp))
10376		bp->rx_mode = BNX2X_RX_MODE_NONE;
10377#endif
10378
10379	/* Schedule the rx_mode command */
10380	if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) {
10381		set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
10382		return;
10383	}
10384
10385	bnx2x_set_storm_rx_mode(bp);
10386}
10387
10388/* called with rtnl_lock */
10389static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
10390			   int devad, u16 addr)
10391{
10392	struct bnx2x *bp = netdev_priv(netdev);
10393	u16 value;
10394	int rc;
10395
10396	DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
10397	   prtad, devad, addr);
10398
10399	/* The HW expects different devad if CL22 is used */
10400	devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
10401
10402	bnx2x_acquire_phy_lock(bp);
10403	rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value);
10404	bnx2x_release_phy_lock(bp);
10405	DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
10406
10407	if (!rc)
10408		rc = value;
10409	return rc;
10410}
10411
10412/* called with rtnl_lock */
10413static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
10414			    u16 addr, u16 value)
10415{
10416	struct bnx2x *bp = netdev_priv(netdev);
10417	int rc;
10418
10419	DP(NETIF_MSG_LINK, "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x,"
10420			   " value 0x%x\n", prtad, devad, addr, value);
10421
10422	/* The HW expects different devad if CL22 is used */
10423	devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
10424
10425	bnx2x_acquire_phy_lock(bp);
10426	rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value);
10427	bnx2x_release_phy_lock(bp);
10428	return rc;
10429}
10430
10431/* called with rtnl_lock */
10432static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
10433{
10434	struct bnx2x *bp = netdev_priv(dev);
10435	struct mii_ioctl_data *mdio = if_mii(ifr);
10436
10437	DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
10438	   mdio->phy_id, mdio->reg_num, mdio->val_in);
10439
10440	if (!netif_running(dev))
10441		return -EAGAIN;
10442
10443	return mdio_mii_ioctl(&bp->mdio, mdio, cmd);
10444}
10445
10446#ifdef CONFIG_NET_POLL_CONTROLLER
10447static void poll_bnx2x(struct net_device *dev)
10448{
10449	struct bnx2x *bp = netdev_priv(dev);
10450
10451	disable_irq(bp->pdev->irq);
10452	bnx2x_interrupt(bp->pdev->irq, dev);
10453	enable_irq(bp->pdev->irq);
10454}
10455#endif
10456
10457static int bnx2x_validate_addr(struct net_device *dev)
10458{
10459	struct bnx2x *bp = netdev_priv(dev);
10460
10461	if (!bnx2x_is_valid_ether_addr(bp, dev->dev_addr))
10462		return -EADDRNOTAVAIL;
10463	return 0;
10464}
10465
10466static const struct net_device_ops bnx2x_netdev_ops = {
10467	.ndo_open		= bnx2x_open,
10468	.ndo_stop		= bnx2x_close,
10469	.ndo_start_xmit		= bnx2x_start_xmit,
10470	.ndo_select_queue	= bnx2x_select_queue,
10471	.ndo_set_rx_mode	= bnx2x_set_rx_mode,
10472	.ndo_set_mac_address	= bnx2x_change_mac_addr,
10473	.ndo_validate_addr	= bnx2x_validate_addr,
10474	.ndo_do_ioctl		= bnx2x_ioctl,
10475	.ndo_change_mtu		= bnx2x_change_mtu,
10476	.ndo_fix_features	= bnx2x_fix_features,
10477	.ndo_set_features	= bnx2x_set_features,
10478	.ndo_tx_timeout		= bnx2x_tx_timeout,
10479#ifdef CONFIG_NET_POLL_CONTROLLER
10480	.ndo_poll_controller	= poll_bnx2x,
10481#endif
10482	.ndo_setup_tc		= bnx2x_setup_tc,
10483
10484#if defined(NETDEV_FCOE_WWNN) && defined(BCM_CNIC)
10485	.ndo_fcoe_get_wwn	= bnx2x_fcoe_get_wwn,
10486#endif
10487};
10488
10489static inline int bnx2x_set_coherency_mask(struct bnx2x *bp)
10490{
10491	struct device *dev = &bp->pdev->dev;
10492
10493	if (dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) {
10494		bp->flags |= USING_DAC_FLAG;
10495		if (dma_set_coherent_mask(dev, DMA_BIT_MASK(64)) != 0) {
10496			dev_err(dev, "dma_set_coherent_mask failed, "
10497				     "aborting\n");
10498			return -EIO;
10499		}
10500	} else if (dma_set_mask(dev, DMA_BIT_MASK(32)) != 0) {
10501		dev_err(dev, "System does not support DMA, aborting\n");
10502		return -EIO;
10503	}
10504
10505	return 0;
10506}
10507
10508static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
10509				    struct net_device *dev,
10510				    unsigned long board_type)
10511{
10512	struct bnx2x *bp;
10513	int rc;
10514
10515	SET_NETDEV_DEV(dev, &pdev->dev);
10516	bp = netdev_priv(dev);
10517
10518	bp->dev = dev;
10519	bp->pdev = pdev;
10520	bp->flags = 0;
10521	bp->pf_num = PCI_FUNC(pdev->devfn);
10522
10523	rc = pci_enable_device(pdev);
10524	if (rc) {
10525		dev_err(&bp->pdev->dev,
10526			"Cannot enable PCI device, aborting\n");
10527		goto err_out;
10528	}
10529
10530	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
10531		dev_err(&bp->pdev->dev,
10532			"Cannot find PCI device base address, aborting\n");
10533		rc = -ENODEV;
10534		goto err_out_disable;
10535	}
10536
10537	if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
10538		dev_err(&bp->pdev->dev, "Cannot find second PCI device"
10539		       " base address, aborting\n");
10540		rc = -ENODEV;
10541		goto err_out_disable;
10542	}
10543
10544	if (atomic_read(&pdev->enable_cnt) == 1) {
10545		rc = pci_request_regions(pdev, DRV_MODULE_NAME);
10546		if (rc) {
10547			dev_err(&bp->pdev->dev,
10548				"Cannot obtain PCI resources, aborting\n");
10549			goto err_out_disable;
10550		}
10551
10552		pci_set_master(pdev);
10553		pci_save_state(pdev);
10554	}
10555
10556	bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
10557	if (bp->pm_cap == 0) {
10558		dev_err(&bp->pdev->dev,
10559			"Cannot find power management capability, aborting\n");
10560		rc = -EIO;
10561		goto err_out_release;
10562	}
10563
10564	if (!pci_is_pcie(pdev)) {
10565		dev_err(&bp->pdev->dev,	"Not PCI Express, aborting\n");
10566		rc = -EIO;
10567		goto err_out_release;
10568	}
10569
10570	rc = bnx2x_set_coherency_mask(bp);
10571	if (rc)
10572		goto err_out_release;
10573
10574	dev->mem_start = pci_resource_start(pdev, 0);
10575	dev->base_addr = dev->mem_start;
10576	dev->mem_end = pci_resource_end(pdev, 0);
10577
10578	dev->irq = pdev->irq;
10579
10580	bp->regview = pci_ioremap_bar(pdev, 0);
10581	if (!bp->regview) {
10582		dev_err(&bp->pdev->dev,
10583			"Cannot map register space, aborting\n");
10584		rc = -ENOMEM;
10585		goto err_out_release;
10586	}
10587
10588	bnx2x_set_power_state(bp, PCI_D0);
10589
10590	/* clean indirect addresses */
10591	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
10592			       PCICFG_VENDOR_ID_OFFSET);
10593	/*
10594	 * Clean the following indirect addresses for all functions since it
10595	 * is not used by the driver.
10596	 */
10597	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
10598	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
10599	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
10600	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
10601
10602	if (CHIP_IS_E1x(bp)) {
10603		REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
10604		REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
10605		REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
10606		REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
10607	}
10608
10609	/*
10610	 * Enable internal target-read (in case we are probed after PF FLR).
10611	 * Must be done prior to any BAR read access. Only for 57712 and up
10612	 */
10613	if (board_type != BCM57710 &&
10614	    board_type != BCM57711 &&
10615	    board_type != BCM57711E)
10616		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
10617
10618	/* Reset the load counter */
10619	bnx2x_clear_load_cnt(bp);
10620
10621	dev->watchdog_timeo = TX_TIMEOUT;
10622
10623	dev->netdev_ops = &bnx2x_netdev_ops;
10624	bnx2x_set_ethtool_ops(dev);
10625
10626	dev->priv_flags |= IFF_UNICAST_FLT;
10627
10628	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
10629		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_LRO |
10630		NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_HW_VLAN_TX;
10631
10632	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
10633		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
10634
10635	dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
10636	if (bp->flags & USING_DAC_FLAG)
10637		dev->features |= NETIF_F_HIGHDMA;
10638
10639	/* Add Loopback capability to the device */
10640	dev->hw_features |= NETIF_F_LOOPBACK;
10641
10642#ifdef BCM_DCBNL
10643	dev->dcbnl_ops = &bnx2x_dcbnl_ops;
10644#endif
10645
10646	/* get_port_hwinfo() will set prtad and mmds properly */
10647	bp->mdio.prtad = MDIO_PRTAD_NONE;
10648	bp->mdio.mmds = 0;
10649	bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
10650	bp->mdio.dev = dev;
10651	bp->mdio.mdio_read = bnx2x_mdio_read;
10652	bp->mdio.mdio_write = bnx2x_mdio_write;
10653
10654	return 0;
10655
10656err_out_release:
10657	if (atomic_read(&pdev->enable_cnt) == 1)
10658		pci_release_regions(pdev);
10659
10660err_out_disable:
10661	pci_disable_device(pdev);
10662	pci_set_drvdata(pdev, NULL);
10663
10664err_out:
10665	return rc;
10666}
10667
10668static void __devinit bnx2x_get_pcie_width_speed(struct bnx2x *bp,
10669						 int *width, int *speed)
10670{
10671	u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
10672
10673	*width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
10674
10675	/* return value of 1=2.5GHz 2=5GHz */
10676	*speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
10677}
10678
10679static int bnx2x_check_firmware(struct bnx2x *bp)
10680{
10681	const struct firmware *firmware = bp->firmware;
10682	struct bnx2x_fw_file_hdr *fw_hdr;
10683	struct bnx2x_fw_file_section *sections;
10684	u32 offset, len, num_ops;
10685	u16 *ops_offsets;
10686	int i;
10687	const u8 *fw_ver;
10688
10689	if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
10690		return -EINVAL;
10691
10692	fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
10693	sections = (struct bnx2x_fw_file_section *)fw_hdr;
10694
10695	/* Make sure none of the offsets and sizes make us read beyond
10696	 * the end of the firmware data */
10697	for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
10698		offset = be32_to_cpu(sections[i].offset);
10699		len = be32_to_cpu(sections[i].len);
10700		if (offset + len > firmware->size) {
10701			dev_err(&bp->pdev->dev,
10702				"Section %d length is out of bounds\n", i);
10703			return -EINVAL;
10704		}
10705	}
10706
10707	/* Likewise for the init_ops offsets */
10708	offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
10709	ops_offsets = (u16 *)(firmware->data + offset);
10710	num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
10711
10712	for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
10713		if (be16_to_cpu(ops_offsets[i]) > num_ops) {
10714			dev_err(&bp->pdev->dev,
10715				"Section offset %d is out of bounds\n", i);
10716			return -EINVAL;
10717		}
10718	}
10719
10720	/* Check FW version */
10721	offset = be32_to_cpu(fw_hdr->fw_version.offset);
10722	fw_ver = firmware->data + offset;
10723	if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
10724	    (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
10725	    (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
10726	    (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
10727		dev_err(&bp->pdev->dev,
10728			"Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
10729		       fw_ver[0], fw_ver[1], fw_ver[2],
10730		       fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
10731		       BCM_5710_FW_MINOR_VERSION,
10732		       BCM_5710_FW_REVISION_VERSION,
10733		       BCM_5710_FW_ENGINEERING_VERSION);
10734		return -EINVAL;
10735	}
10736
10737	return 0;
10738}
10739
10740static inline void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
10741{
10742	const __be32 *source = (const __be32 *)_source;
10743	u32 *target = (u32 *)_target;
10744	u32 i;
10745
10746	for (i = 0; i < n/4; i++)
10747		target[i] = be32_to_cpu(source[i]);
10748}
10749
10750/*
10751   Ops array is stored in the following format:
10752   {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
10753 */
10754static inline void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
10755{
10756	const __be32 *source = (const __be32 *)_source;
10757	struct raw_op *target = (struct raw_op *)_target;
10758	u32 i, j, tmp;
10759
10760	for (i = 0, j = 0; i < n/8; i++, j += 2) {
10761		tmp = be32_to_cpu(source[j]);
10762		target[i].op = (tmp >> 24) & 0xff;
10763		target[i].offset = tmp & 0xffffff;
10764		target[i].raw_data = be32_to_cpu(source[j + 1]);
10765	}
10766}
10767
10768/**
10769 * IRO array is stored in the following format:
10770 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) }
10771 */
10772static inline void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n)
10773{
10774	const __be32 *source = (const __be32 *)_source;
10775	struct iro *target = (struct iro *)_target;
10776	u32 i, j, tmp;
10777
10778	for (i = 0, j = 0; i < n/sizeof(struct iro); i++) {
10779		target[i].base = be32_to_cpu(source[j]);
10780		j++;
10781		tmp = be32_to_cpu(source[j]);
10782		target[i].m1 = (tmp >> 16) & 0xffff;
10783		target[i].m2 = tmp & 0xffff;
10784		j++;
10785		tmp = be32_to_cpu(source[j]);
10786		target[i].m3 = (tmp >> 16) & 0xffff;
10787		target[i].size = tmp & 0xffff;
10788		j++;
10789	}
10790}
10791
10792static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
10793{
10794	const __be16 *source = (const __be16 *)_source;
10795	u16 *target = (u16 *)_target;
10796	u32 i;
10797
10798	for (i = 0; i < n/2; i++)
10799		target[i] = be16_to_cpu(source[i]);
10800}
10801
10802#define BNX2X_ALLOC_AND_SET(arr, lbl, func)				\
10803do {									\
10804	u32 len = be32_to_cpu(fw_hdr->arr.len);				\
10805	bp->arr = kmalloc(len, GFP_KERNEL);				\
10806	if (!bp->arr) {							\
10807		pr_err("Failed to allocate %d bytes for "#arr"\n", len); \
10808		goto lbl;						\
10809	}								\
10810	func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset),	\
10811	     (u8 *)bp->arr, len);					\
10812} while (0)
10813
10814int bnx2x_init_firmware(struct bnx2x *bp)
10815{
10816	struct bnx2x_fw_file_hdr *fw_hdr;
10817	int rc;
10818
10819
10820	if (!bp->firmware) {
10821		const char *fw_file_name;
10822
10823		if (CHIP_IS_E1(bp))
10824			fw_file_name = FW_FILE_NAME_E1;
10825		else if (CHIP_IS_E1H(bp))
10826			fw_file_name = FW_FILE_NAME_E1H;
10827		else if (!CHIP_IS_E1x(bp))
10828			fw_file_name = FW_FILE_NAME_E2;
10829		else {
10830			BNX2X_ERR("Unsupported chip revision\n");
10831			return -EINVAL;
10832		}
10833		BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
10834
10835		rc = request_firmware(&bp->firmware, fw_file_name,
10836				      &bp->pdev->dev);
10837		if (rc) {
10838			BNX2X_ERR("Can't load firmware file %s\n",
10839				  fw_file_name);
10840			goto request_firmware_exit;
10841		}
10842
10843		rc = bnx2x_check_firmware(bp);
10844		if (rc) {
10845			BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
10846			goto request_firmware_exit;
10847		}
10848	}
10849
10850	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
10851
10852	/* Initialize the pointers to the init arrays */
10853	/* Blob */
10854	BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
10855
10856	/* Opcodes */
10857	BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
10858
10859	/* Offsets */
10860	BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err,
10861			    be16_to_cpu_n);
10862
10863	/* STORMs firmware */
10864	INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
10865			be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
10866	INIT_TSEM_PRAM_DATA(bp)      = bp->firmware->data +
10867			be32_to_cpu(fw_hdr->tsem_pram_data.offset);
10868	INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
10869			be32_to_cpu(fw_hdr->usem_int_table_data.offset);
10870	INIT_USEM_PRAM_DATA(bp)      = bp->firmware->data +
10871			be32_to_cpu(fw_hdr->usem_pram_data.offset);
10872	INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
10873			be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
10874	INIT_XSEM_PRAM_DATA(bp)      = bp->firmware->data +
10875			be32_to_cpu(fw_hdr->xsem_pram_data.offset);
10876	INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
10877			be32_to_cpu(fw_hdr->csem_int_table_data.offset);
10878	INIT_CSEM_PRAM_DATA(bp)      = bp->firmware->data +
10879			be32_to_cpu(fw_hdr->csem_pram_data.offset);
10880	/* IRO */
10881	BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro);
10882
10883	return 0;
10884
10885iro_alloc_err:
10886	kfree(bp->init_ops_offsets);
10887init_offsets_alloc_err:
10888	kfree(bp->init_ops);
10889init_ops_alloc_err:
10890	kfree(bp->init_data);
10891request_firmware_exit:
10892	release_firmware(bp->firmware);
10893
10894	return rc;
10895}
10896
10897static void bnx2x_release_firmware(struct bnx2x *bp)
10898{
10899	kfree(bp->init_ops_offsets);
10900	kfree(bp->init_ops);
10901	kfree(bp->init_data);
10902	release_firmware(bp->firmware);
10903	bp->firmware = NULL;
10904}
10905
10906
10907static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = {
10908	.init_hw_cmn_chip = bnx2x_init_hw_common_chip,
10909	.init_hw_cmn      = bnx2x_init_hw_common,
10910	.init_hw_port     = bnx2x_init_hw_port,
10911	.init_hw_func     = bnx2x_init_hw_func,
10912
10913	.reset_hw_cmn     = bnx2x_reset_common,
10914	.reset_hw_port    = bnx2x_reset_port,
10915	.reset_hw_func    = bnx2x_reset_func,
10916
10917	.gunzip_init      = bnx2x_gunzip_init,
10918	.gunzip_end       = bnx2x_gunzip_end,
10919
10920	.init_fw          = bnx2x_init_firmware,
10921	.release_fw       = bnx2x_release_firmware,
10922};
10923
10924void bnx2x__init_func_obj(struct bnx2x *bp)
10925{
10926	/* Prepare DMAE related driver resources */
10927	bnx2x_setup_dmae(bp);
10928
10929	bnx2x_init_func_obj(bp, &bp->func_obj,
10930			    bnx2x_sp(bp, func_rdata),
10931			    bnx2x_sp_mapping(bp, func_rdata),
10932			    &bnx2x_func_sp_drv);
10933}
10934
10935/* must be called after sriov-enable */
10936static inline int bnx2x_set_qm_cid_count(struct bnx2x *bp)
10937{
10938	int cid_count = BNX2X_L2_CID_COUNT(bp);
10939
10940#ifdef BCM_CNIC
10941	cid_count += CNIC_CID_MAX;
10942#endif
10943	return roundup(cid_count, QM_CID_ROUND);
10944}
10945
10946/**
10947 * bnx2x_get_num_none_def_sbs - return the number of none default SBs
10948 *
10949 * @dev:	pci device
10950 *
10951 */
10952static inline int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev)
10953{
10954	int pos;
10955	u16 control;
10956
10957	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
10958
10959	/*
10960	 * If MSI-X is not supported - return number of SBs needed to support
10961	 * one fast path queue: one FP queue + SB for CNIC
10962	 */
10963	if (!pos)
10964		return 1 + CNIC_PRESENT;
10965
10966	/*
10967	 * The value in the PCI configuration space is the index of the last
10968	 * entry, namely one less than the actual size of the table, which is
10969	 * exactly what we want to return from this function: number of all SBs
10970	 * without the default SB.
10971	 */
10972	pci_read_config_word(pdev, pos  + PCI_MSI_FLAGS, &control);
10973	return control & PCI_MSIX_FLAGS_QSIZE;
10974}
10975
10976static int __devinit bnx2x_init_one(struct pci_dev *pdev,
10977				    const struct pci_device_id *ent)
10978{
10979	struct net_device *dev = NULL;
10980	struct bnx2x *bp;
10981	int pcie_width, pcie_speed;
10982	int rc, max_non_def_sbs;
10983	int rx_count, tx_count, rss_count;
10984	/*
10985	 * An estimated maximum supported CoS number according to the chip
10986	 * version.
10987	 * We will try to roughly estimate the maximum number of CoSes this chip
10988	 * may support in order to minimize the memory allocated for Tx
10989	 * netdev_queue's. This number will be accurately calculated during the
10990	 * initialization of bp->max_cos based on the chip versions AND chip
10991	 * revision in the bnx2x_init_bp().
10992	 */
10993	u8 max_cos_est = 0;
10994
10995	switch (ent->driver_data) {
10996	case BCM57710:
10997	case BCM57711:
10998	case BCM57711E:
10999		max_cos_est = BNX2X_MULTI_TX_COS_E1X;
11000		break;
11001
11002	case BCM57712:
11003	case BCM57712_MF:
11004		max_cos_est = BNX2X_MULTI_TX_COS_E2_E3A0;
11005		break;
11006
11007	case BCM57800:
11008	case BCM57800_MF:
11009	case BCM57810:
11010	case BCM57810_MF:
11011	case BCM57840:
11012	case BCM57840_MF:
11013		max_cos_est = BNX2X_MULTI_TX_COS_E3B0;
11014		break;
11015
11016	default:
11017		pr_err("Unknown board_type (%ld), aborting\n",
11018			   ent->driver_data);
11019		return -ENODEV;
11020	}
11021
11022	max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev);
11023
11024	/* !!! FIXME !!!
11025	 * Do not allow the maximum SB count to grow above 16
11026	 * since Special CIDs starts from 16*BNX2X_MULTI_TX_COS=48.
11027	 * We will use the FP_SB_MAX_E1x macro for this matter.
11028	 */
11029	max_non_def_sbs = min_t(int, FP_SB_MAX_E1x, max_non_def_sbs);
11030
11031	WARN_ON(!max_non_def_sbs);
11032
11033	/* Maximum number of RSS queues: one IGU SB goes to CNIC */
11034	rss_count = max_non_def_sbs - CNIC_PRESENT;
11035
11036	/* Maximum number of netdev Rx queues: RSS + FCoE L2 */
11037	rx_count = rss_count + FCOE_PRESENT;
11038
11039	/*
11040	 * Maximum number of netdev Tx queues:
11041	 *      Maximum TSS queues * Maximum supported number of CoS  + FCoE L2
11042	 */
11043	tx_count = MAX_TXQS_PER_COS * max_cos_est + FCOE_PRESENT;
11044
11045	/* dev zeroed in init_etherdev */
11046	dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count);
11047	if (!dev) {
11048		dev_err(&pdev->dev, "Cannot allocate net device\n");
11049		return -ENOMEM;
11050	}
11051
11052	bp = netdev_priv(dev);
11053
11054	DP(NETIF_MSG_DRV, "Allocated netdev with %d tx and %d rx queues\n",
11055			  tx_count, rx_count);
11056
11057	bp->igu_sb_cnt = max_non_def_sbs;
11058	bp->msg_enable = debug;
11059	pci_set_drvdata(pdev, dev);
11060
11061	rc = bnx2x_init_dev(pdev, dev, ent->driver_data);
11062	if (rc < 0) {
11063		free_netdev(dev);
11064		return rc;
11065	}
11066
11067	DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs);
11068
11069	rc = bnx2x_init_bp(bp);
11070	if (rc)
11071		goto init_one_exit;
11072
11073	/*
11074	 * Map doorbels here as we need the real value of bp->max_cos which
11075	 * is initialized in bnx2x_init_bp().
11076	 */
11077	bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
11078					min_t(u64, BNX2X_DB_SIZE(bp),
11079					      pci_resource_len(pdev, 2)));
11080	if (!bp->doorbells) {
11081		dev_err(&bp->pdev->dev,
11082			"Cannot map doorbell space, aborting\n");
11083		rc = -ENOMEM;
11084		goto init_one_exit;
11085	}
11086
11087	/* calc qm_cid_count */
11088	bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
11089
11090#ifdef BCM_CNIC
11091	/* disable FCOE L2 queue for E1x */
11092	if (CHIP_IS_E1x(bp))
11093		bp->flags |= NO_FCOE_FLAG;
11094
11095#endif
11096
11097	/* Configure interrupt mode: try to enable MSI-X/MSI if
11098	 * needed, set bp->num_queues appropriately.
11099	 */
11100	bnx2x_set_int_mode(bp);
11101
11102	/* Add all NAPI objects */
11103	bnx2x_add_all_napi(bp);
11104
11105	rc = register_netdev(dev);
11106	if (rc) {
11107		dev_err(&pdev->dev, "Cannot register net device\n");
11108		goto init_one_exit;
11109	}
11110
11111#ifdef BCM_CNIC
11112	if (!NO_FCOE(bp)) {
11113		/* Add storage MAC address */
11114		rtnl_lock();
11115		dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
11116		rtnl_unlock();
11117	}
11118#endif
11119
11120	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
11121
11122	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
11123		    board_info[ent->driver_data].name,
11124		    (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
11125		    pcie_width,
11126		    ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
11127		     (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
11128		    "5GHz (Gen2)" : "2.5GHz",
11129		    dev->base_addr, bp->pdev->irq, dev->dev_addr);
11130
11131	return 0;
11132
11133init_one_exit:
11134	if (bp->regview)
11135		iounmap(bp->regview);
11136
11137	if (bp->doorbells)
11138		iounmap(bp->doorbells);
11139
11140	free_netdev(dev);
11141
11142	if (atomic_read(&pdev->enable_cnt) == 1)
11143		pci_release_regions(pdev);
11144
11145	pci_disable_device(pdev);
11146	pci_set_drvdata(pdev, NULL);
11147
11148	return rc;
11149}
11150
11151static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
11152{
11153	struct net_device *dev = pci_get_drvdata(pdev);
11154	struct bnx2x *bp;
11155
11156	if (!dev) {
11157		dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
11158		return;
11159	}
11160	bp = netdev_priv(dev);
11161
11162#ifdef BCM_CNIC
11163	/* Delete storage MAC address */
11164	if (!NO_FCOE(bp)) {
11165		rtnl_lock();
11166		dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
11167		rtnl_unlock();
11168	}
11169#endif
11170
11171#ifdef BCM_DCBNL
11172	/* Delete app tlvs from dcbnl */
11173	bnx2x_dcbnl_update_applist(bp, true);
11174#endif
11175
11176	unregister_netdev(dev);
11177
11178	/* Delete all NAPI objects */
11179	bnx2x_del_all_napi(bp);
11180
11181	/* Power on: we can't let PCI layer write to us while we are in D3 */
11182	bnx2x_set_power_state(bp, PCI_D0);
11183
11184	/* Disable MSI/MSI-X */
11185	bnx2x_disable_msi(bp);
11186
11187	/* Power off */
11188	bnx2x_set_power_state(bp, PCI_D3hot);
11189
11190	/* Make sure RESET task is not scheduled before continuing */
11191	cancel_delayed_work_sync(&bp->sp_rtnl_task);
11192
11193	if (bp->regview)
11194		iounmap(bp->regview);
11195
11196	if (bp->doorbells)
11197		iounmap(bp->doorbells);
11198
11199	bnx2x_release_firmware(bp);
11200
11201	bnx2x_free_mem_bp(bp);
11202
11203	free_netdev(dev);
11204
11205	if (atomic_read(&pdev->enable_cnt) == 1)
11206		pci_release_regions(pdev);
11207
11208	pci_disable_device(pdev);
11209	pci_set_drvdata(pdev, NULL);
11210}
11211
11212static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
11213{
11214	int i;
11215
11216	bp->state = BNX2X_STATE_ERROR;
11217
11218	bp->rx_mode = BNX2X_RX_MODE_NONE;
11219
11220#ifdef BCM_CNIC
11221	bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
11222#endif
11223	/* Stop Tx */
11224	bnx2x_tx_disable(bp);
11225
11226	bnx2x_netif_stop(bp, 0);
11227
11228	del_timer_sync(&bp->timer);
11229
11230	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
11231
11232	/* Release IRQs */
11233	bnx2x_free_irq(bp);
11234
11235	/* Free SKBs, SGEs, TPA pool and driver internals */
11236	bnx2x_free_skbs(bp);
11237
11238	for_each_rx_queue(bp, i)
11239		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
11240
11241	bnx2x_free_mem(bp);
11242
11243	bp->state = BNX2X_STATE_CLOSED;
11244
11245	netif_carrier_off(bp->dev);
11246
11247	return 0;
11248}
11249
11250static void bnx2x_eeh_recover(struct bnx2x *bp)
11251{
11252	u32 val;
11253
11254	mutex_init(&bp->port.phy_mutex);
11255
11256	bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
11257	bp->link_params.shmem_base = bp->common.shmem_base;
11258	BNX2X_DEV_INFO("shmem offset is 0x%x\n", bp->common.shmem_base);
11259
11260	if (!bp->common.shmem_base ||
11261	    (bp->common.shmem_base < 0xA0000) ||
11262	    (bp->common.shmem_base >= 0xC0000)) {
11263		BNX2X_DEV_INFO("MCP not active\n");
11264		bp->flags |= NO_MCP_FLAG;
11265		return;
11266	}
11267
11268	val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
11269	if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
11270		!= (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
11271		BNX2X_ERR("BAD MCP validity signature\n");
11272
11273	if (!BP_NOMCP(bp)) {
11274		bp->fw_seq =
11275		    (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
11276		    DRV_MSG_SEQ_NUMBER_MASK);
11277		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
11278	}
11279}
11280
11281/**
11282 * bnx2x_io_error_detected - called when PCI error is detected
11283 * @pdev: Pointer to PCI device
11284 * @state: The current pci connection state
11285 *
11286 * This function is called after a PCI bus error affecting
11287 * this device has been detected.
11288 */
11289static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
11290						pci_channel_state_t state)
11291{
11292	struct net_device *dev = pci_get_drvdata(pdev);
11293	struct bnx2x *bp = netdev_priv(dev);
11294
11295	rtnl_lock();
11296
11297	netif_device_detach(dev);
11298
11299	if (state == pci_channel_io_perm_failure) {
11300		rtnl_unlock();
11301		return PCI_ERS_RESULT_DISCONNECT;
11302	}
11303
11304	if (netif_running(dev))
11305		bnx2x_eeh_nic_unload(bp);
11306
11307	pci_disable_device(pdev);
11308
11309	rtnl_unlock();
11310
11311	/* Request a slot reset */
11312	return PCI_ERS_RESULT_NEED_RESET;
11313}
11314
11315/**
11316 * bnx2x_io_slot_reset - called after the PCI bus has been reset
11317 * @pdev: Pointer to PCI device
11318 *
11319 * Restart the card from scratch, as if from a cold-boot.
11320 */
11321static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
11322{
11323	struct net_device *dev = pci_get_drvdata(pdev);
11324	struct bnx2x *bp = netdev_priv(dev);
11325
11326	rtnl_lock();
11327
11328	if (pci_enable_device(pdev)) {
11329		dev_err(&pdev->dev,
11330			"Cannot re-enable PCI device after reset\n");
11331		rtnl_unlock();
11332		return PCI_ERS_RESULT_DISCONNECT;
11333	}
11334
11335	pci_set_master(pdev);
11336	pci_restore_state(pdev);
11337
11338	if (netif_running(dev))
11339		bnx2x_set_power_state(bp, PCI_D0);
11340
11341	rtnl_unlock();
11342
11343	return PCI_ERS_RESULT_RECOVERED;
11344}
11345
11346/**
11347 * bnx2x_io_resume - called when traffic can start flowing again
11348 * @pdev: Pointer to PCI device
11349 *
11350 * This callback is called when the error recovery driver tells us that
11351 * its OK to resume normal operation.
11352 */
11353static void bnx2x_io_resume(struct pci_dev *pdev)
11354{
11355	struct net_device *dev = pci_get_drvdata(pdev);
11356	struct bnx2x *bp = netdev_priv(dev);
11357
11358	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
11359		netdev_err(bp->dev, "Handling parity error recovery. "
11360				    "Try again later\n");
11361		return;
11362	}
11363
11364	rtnl_lock();
11365
11366	bnx2x_eeh_recover(bp);
11367
11368	if (netif_running(dev))
11369		bnx2x_nic_load(bp, LOAD_NORMAL);
11370
11371	netif_device_attach(dev);
11372
11373	rtnl_unlock();
11374}
11375
11376static struct pci_error_handlers bnx2x_err_handler = {
11377	.error_detected = bnx2x_io_error_detected,
11378	.slot_reset     = bnx2x_io_slot_reset,
11379	.resume         = bnx2x_io_resume,
11380};
11381
11382static struct pci_driver bnx2x_pci_driver = {
11383	.name        = DRV_MODULE_NAME,
11384	.id_table    = bnx2x_pci_tbl,
11385	.probe       = bnx2x_init_one,
11386	.remove      = __devexit_p(bnx2x_remove_one),
11387	.suspend     = bnx2x_suspend,
11388	.resume      = bnx2x_resume,
11389	.err_handler = &bnx2x_err_handler,
11390};
11391
11392static int __init bnx2x_init(void)
11393{
11394	int ret;
11395
11396	pr_info("%s", version);
11397
11398	bnx2x_wq = create_singlethread_workqueue("bnx2x");
11399	if (bnx2x_wq == NULL) {
11400		pr_err("Cannot create workqueue\n");
11401		return -ENOMEM;
11402	}
11403
11404	ret = pci_register_driver(&bnx2x_pci_driver);
11405	if (ret) {
11406		pr_err("Cannot register driver\n");
11407		destroy_workqueue(bnx2x_wq);
11408	}
11409	return ret;
11410}
11411
11412static void __exit bnx2x_cleanup(void)
11413{
11414	pci_unregister_driver(&bnx2x_pci_driver);
11415
11416	destroy_workqueue(bnx2x_wq);
11417}
11418
11419void bnx2x_notify_link_changed(struct bnx2x *bp)
11420{
11421	REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1);
11422}
11423
11424module_init(bnx2x_init);
11425module_exit(bnx2x_cleanup);
11426
11427#ifdef BCM_CNIC
11428/**
11429 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
11430 *
11431 * @bp:		driver handle
11432 * @set:	set or clear the CAM entry
11433 *
11434 * This function will wait until the ramdord completion returns.
11435 * Return 0 if success, -ENODEV if ramrod doesn't return.
11436 */
11437static inline int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp)
11438{
11439	unsigned long ramrod_flags = 0;
11440
11441	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
11442	return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac,
11443				 &bp->iscsi_l2_mac_obj, true,
11444				 BNX2X_ISCSI_ETH_MAC, &ramrod_flags);
11445}
11446
11447/* count denotes the number of new completions we have seen */
11448static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
11449{
11450	struct eth_spe *spe;
11451
11452#ifdef BNX2X_STOP_ON_ERROR
11453	if (unlikely(bp->panic))
11454		return;
11455#endif
11456
11457	spin_lock_bh(&bp->spq_lock);
11458	BUG_ON(bp->cnic_spq_pending < count);
11459	bp->cnic_spq_pending -= count;
11460
11461
11462	for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) {
11463		u16 type =  (le16_to_cpu(bp->cnic_kwq_cons->hdr.type)
11464				& SPE_HDR_CONN_TYPE) >>
11465				SPE_HDR_CONN_TYPE_SHIFT;
11466		u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data)
11467				>> SPE_HDR_CMD_ID_SHIFT) & 0xff;
11468
11469		/* Set validation for iSCSI L2 client before sending SETUP
11470		 *  ramrod
11471		 */
11472		if (type == ETH_CONNECTION_TYPE) {
11473			if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP)
11474				bnx2x_set_ctx_validation(bp, &bp->context.
11475					vcxt[BNX2X_ISCSI_ETH_CID].eth,
11476					BNX2X_ISCSI_ETH_CID);
11477		}
11478
11479		/*
11480		 * There may be not more than 8 L2, not more than 8 L5 SPEs
11481		 * and in the air. We also check that number of outstanding
11482		 * COMMON ramrods is not more than the EQ and SPQ can
11483		 * accommodate.
11484		 */
11485		if (type == ETH_CONNECTION_TYPE) {
11486			if (!atomic_read(&bp->cq_spq_left))
11487				break;
11488			else
11489				atomic_dec(&bp->cq_spq_left);
11490		} else if (type == NONE_CONNECTION_TYPE) {
11491			if (!atomic_read(&bp->eq_spq_left))
11492				break;
11493			else
11494				atomic_dec(&bp->eq_spq_left);
11495		} else if ((type == ISCSI_CONNECTION_TYPE) ||
11496			   (type == FCOE_CONNECTION_TYPE)) {
11497			if (bp->cnic_spq_pending >=
11498			    bp->cnic_eth_dev.max_kwqe_pending)
11499				break;
11500			else
11501				bp->cnic_spq_pending++;
11502		} else {
11503			BNX2X_ERR("Unknown SPE type: %d\n", type);
11504			bnx2x_panic();
11505			break;
11506		}
11507
11508		spe = bnx2x_sp_get_next(bp);
11509		*spe = *bp->cnic_kwq_cons;
11510
11511		DP(NETIF_MSG_TIMER, "pending on SPQ %d, on KWQ %d count %d\n",
11512		   bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
11513
11514		if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
11515			bp->cnic_kwq_cons = bp->cnic_kwq;
11516		else
11517			bp->cnic_kwq_cons++;
11518	}
11519	bnx2x_sp_prod_update(bp);
11520	spin_unlock_bh(&bp->spq_lock);
11521}
11522
11523static int bnx2x_cnic_sp_queue(struct net_device *dev,
11524			       struct kwqe_16 *kwqes[], u32 count)
11525{
11526	struct bnx2x *bp = netdev_priv(dev);
11527	int i;
11528
11529#ifdef BNX2X_STOP_ON_ERROR
11530	if (unlikely(bp->panic))
11531		return -EIO;
11532#endif
11533
11534	spin_lock_bh(&bp->spq_lock);
11535
11536	for (i = 0; i < count; i++) {
11537		struct eth_spe *spe = (struct eth_spe *)kwqes[i];
11538
11539		if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
11540			break;
11541
11542		*bp->cnic_kwq_prod = *spe;
11543
11544		bp->cnic_kwq_pending++;
11545
11546		DP(NETIF_MSG_TIMER, "L5 SPQE %x %x %x:%x pos %d\n",
11547		   spe->hdr.conn_and_cmd_data, spe->hdr.type,
11548		   spe->data.update_data_addr.hi,
11549		   spe->data.update_data_addr.lo,
11550		   bp->cnic_kwq_pending);
11551
11552		if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
11553			bp->cnic_kwq_prod = bp->cnic_kwq;
11554		else
11555			bp->cnic_kwq_prod++;
11556	}
11557
11558	spin_unlock_bh(&bp->spq_lock);
11559
11560	if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
11561		bnx2x_cnic_sp_post(bp, 0);
11562
11563	return i;
11564}
11565
11566static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
11567{
11568	struct cnic_ops *c_ops;
11569	int rc = 0;
11570
11571	mutex_lock(&bp->cnic_mutex);
11572	c_ops = rcu_dereference_protected(bp->cnic_ops,
11573					  lockdep_is_held(&bp->cnic_mutex));
11574	if (c_ops)
11575		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
11576	mutex_unlock(&bp->cnic_mutex);
11577
11578	return rc;
11579}
11580
11581static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
11582{
11583	struct cnic_ops *c_ops;
11584	int rc = 0;
11585
11586	rcu_read_lock();
11587	c_ops = rcu_dereference(bp->cnic_ops);
11588	if (c_ops)
11589		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
11590	rcu_read_unlock();
11591
11592	return rc;
11593}
11594
11595/*
11596 * for commands that have no data
11597 */
11598int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
11599{
11600	struct cnic_ctl_info ctl = {0};
11601
11602	ctl.cmd = cmd;
11603
11604	return bnx2x_cnic_ctl_send(bp, &ctl);
11605}
11606
11607static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err)
11608{
11609	struct cnic_ctl_info ctl = {0};
11610
11611	/* first we tell CNIC and only then we count this as a completion */
11612	ctl.cmd = CNIC_CTL_COMPLETION_CMD;
11613	ctl.data.comp.cid = cid;
11614	ctl.data.comp.error = err;
11615
11616	bnx2x_cnic_ctl_send_bh(bp, &ctl);
11617	bnx2x_cnic_sp_post(bp, 0);
11618}
11619
11620
11621/* Called with netif_addr_lock_bh() taken.
11622 * Sets an rx_mode config for an iSCSI ETH client.
11623 * Doesn't block.
11624 * Completion should be checked outside.
11625 */
11626static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start)
11627{
11628	unsigned long accept_flags = 0, ramrod_flags = 0;
11629	u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
11630	int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED;
11631
11632	if (start) {
11633		/* Start accepting on iSCSI L2 ring. Accept all multicasts
11634		 * because it's the only way for UIO Queue to accept
11635		 * multicasts (in non-promiscuous mode only one Queue per
11636		 * function will receive multicast packets (leading in our
11637		 * case).
11638		 */
11639		__set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags);
11640		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags);
11641		__set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags);
11642		__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
11643
11644		/* Clear STOP_PENDING bit if START is requested */
11645		clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state);
11646
11647		sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED;
11648	} else
11649		/* Clear START_PENDING bit if STOP is requested */
11650		clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state);
11651
11652	if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
11653		set_bit(sched_state, &bp->sp_state);
11654	else {
11655		__set_bit(RAMROD_RX, &ramrod_flags);
11656		bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0,
11657				    ramrod_flags);
11658	}
11659}
11660
11661
11662static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
11663{
11664	struct bnx2x *bp = netdev_priv(dev);
11665	int rc = 0;
11666
11667	switch (ctl->cmd) {
11668	case DRV_CTL_CTXTBL_WR_CMD: {
11669		u32 index = ctl->data.io.offset;
11670		dma_addr_t addr = ctl->data.io.dma_addr;
11671
11672		bnx2x_ilt_wr(bp, index, addr);
11673		break;
11674	}
11675
11676	case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: {
11677		int count = ctl->data.credit.credit_count;
11678
11679		bnx2x_cnic_sp_post(bp, count);
11680		break;
11681	}
11682
11683	/* rtnl_lock is held.  */
11684	case DRV_CTL_START_L2_CMD: {
11685		struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
11686		unsigned long sp_bits = 0;
11687
11688		/* Configure the iSCSI classification object */
11689		bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj,
11690				   cp->iscsi_l2_client_id,
11691				   cp->iscsi_l2_cid, BP_FUNC(bp),
11692				   bnx2x_sp(bp, mac_rdata),
11693				   bnx2x_sp_mapping(bp, mac_rdata),
11694				   BNX2X_FILTER_MAC_PENDING,
11695				   &bp->sp_state, BNX2X_OBJ_TYPE_RX,
11696				   &bp->macs_pool);
11697
11698		/* Set iSCSI MAC address */
11699		rc = bnx2x_set_iscsi_eth_mac_addr(bp);
11700		if (rc)
11701			break;
11702
11703		mmiowb();
11704		barrier();
11705
11706		/* Start accepting on iSCSI L2 ring */
11707
11708		netif_addr_lock_bh(dev);
11709		bnx2x_set_iscsi_eth_rx_mode(bp, true);
11710		netif_addr_unlock_bh(dev);
11711
11712		/* bits to wait on */
11713		__set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
11714		__set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits);
11715
11716		if (!bnx2x_wait_sp_comp(bp, sp_bits))
11717			BNX2X_ERR("rx_mode completion timed out!\n");
11718
11719		break;
11720	}
11721
11722	/* rtnl_lock is held.  */
11723	case DRV_CTL_STOP_L2_CMD: {
11724		unsigned long sp_bits = 0;
11725
11726		/* Stop accepting on iSCSI L2 ring */
11727		netif_addr_lock_bh(dev);
11728		bnx2x_set_iscsi_eth_rx_mode(bp, false);
11729		netif_addr_unlock_bh(dev);
11730
11731		/* bits to wait on */
11732		__set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
11733		__set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits);
11734
11735		if (!bnx2x_wait_sp_comp(bp, sp_bits))
11736			BNX2X_ERR("rx_mode completion timed out!\n");
11737
11738		mmiowb();
11739		barrier();
11740
11741		/* Unset iSCSI L2 MAC */
11742		rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj,
11743					BNX2X_ISCSI_ETH_MAC, true);
11744		break;
11745	}
11746	case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: {
11747		int count = ctl->data.credit.credit_count;
11748
11749		smp_mb__before_atomic_inc();
11750		atomic_add(count, &bp->cq_spq_left);
11751		smp_mb__after_atomic_inc();
11752		break;
11753	}
11754	case DRV_CTL_ULP_REGISTER_CMD: {
11755		int ulp_type = ctl->data.ulp_type;
11756
11757		if (CHIP_IS_E3(bp)) {
11758			int idx = BP_FW_MB_IDX(bp);
11759			u32 cap;
11760
11761			cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]);
11762			if (ulp_type == CNIC_ULP_ISCSI)
11763				cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI;
11764			else if (ulp_type == CNIC_ULP_FCOE)
11765				cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
11766			SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
11767		}
11768		break;
11769	}
11770	case DRV_CTL_ULP_UNREGISTER_CMD: {
11771		int ulp_type = ctl->data.ulp_type;
11772
11773		if (CHIP_IS_E3(bp)) {
11774			int idx = BP_FW_MB_IDX(bp);
11775			u32 cap;
11776
11777			cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]);
11778			if (ulp_type == CNIC_ULP_ISCSI)
11779				cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI;
11780			else if (ulp_type == CNIC_ULP_FCOE)
11781				cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
11782			SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
11783		}
11784		break;
11785	}
11786
11787	default:
11788		BNX2X_ERR("unknown command %x\n", ctl->cmd);
11789		rc = -EINVAL;
11790	}
11791
11792	return rc;
11793}
11794
11795void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
11796{
11797	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
11798
11799	if (bp->flags & USING_MSIX_FLAG) {
11800		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
11801		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
11802		cp->irq_arr[0].vector = bp->msix_table[1].vector;
11803	} else {
11804		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
11805		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
11806	}
11807	if (!CHIP_IS_E1x(bp))
11808		cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb;
11809	else
11810		cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb;
11811
11812	cp->irq_arr[0].status_blk_num =  bnx2x_cnic_fw_sb_id(bp);
11813	cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp);
11814	cp->irq_arr[1].status_blk = bp->def_status_blk;
11815	cp->irq_arr[1].status_blk_num = DEF_SB_ID;
11816	cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID;
11817
11818	cp->num_irq = 2;
11819}
11820
11821static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
11822			       void *data)
11823{
11824	struct bnx2x *bp = netdev_priv(dev);
11825	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
11826
11827	if (ops == NULL)
11828		return -EINVAL;
11829
11830	bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
11831	if (!bp->cnic_kwq)
11832		return -ENOMEM;
11833
11834	bp->cnic_kwq_cons = bp->cnic_kwq;
11835	bp->cnic_kwq_prod = bp->cnic_kwq;
11836	bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
11837
11838	bp->cnic_spq_pending = 0;
11839	bp->cnic_kwq_pending = 0;
11840
11841	bp->cnic_data = data;
11842
11843	cp->num_irq = 0;
11844	cp->drv_state |= CNIC_DRV_STATE_REGD;
11845	cp->iro_arr = bp->iro_arr;
11846
11847	bnx2x_setup_cnic_irq_info(bp);
11848
11849	rcu_assign_pointer(bp->cnic_ops, ops);
11850
11851	return 0;
11852}
11853
11854static int bnx2x_unregister_cnic(struct net_device *dev)
11855{
11856	struct bnx2x *bp = netdev_priv(dev);
11857	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
11858
11859	mutex_lock(&bp->cnic_mutex);
11860	cp->drv_state = 0;
11861	RCU_INIT_POINTER(bp->cnic_ops, NULL);
11862	mutex_unlock(&bp->cnic_mutex);
11863	synchronize_rcu();
11864	kfree(bp->cnic_kwq);
11865	bp->cnic_kwq = NULL;
11866
11867	return 0;
11868}
11869
11870struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
11871{
11872	struct bnx2x *bp = netdev_priv(dev);
11873	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
11874
11875	/* If both iSCSI and FCoE are disabled - return NULL in
11876	 * order to indicate CNIC that it should not try to work
11877	 * with this device.
11878	 */
11879	if (NO_ISCSI(bp) && NO_FCOE(bp))
11880		return NULL;
11881
11882	cp->drv_owner = THIS_MODULE;
11883	cp->chip_id = CHIP_ID(bp);
11884	cp->pdev = bp->pdev;
11885	cp->io_base = bp->regview;
11886	cp->io_base2 = bp->doorbells;
11887	cp->max_kwqe_pending = 8;
11888	cp->ctx_blk_size = CDU_ILT_PAGE_SZ;
11889	cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) +
11890			     bnx2x_cid_ilt_lines(bp);
11891	cp->ctx_tbl_len = CNIC_ILT_LINES;
11892	cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS;
11893	cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
11894	cp->drv_ctl = bnx2x_drv_ctl;
11895	cp->drv_register_cnic = bnx2x_register_cnic;
11896	cp->drv_unregister_cnic = bnx2x_unregister_cnic;
11897	cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID;
11898	cp->iscsi_l2_client_id =
11899		bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
11900	cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID;
11901
11902	if (NO_ISCSI_OOO(bp))
11903		cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
11904
11905	if (NO_ISCSI(bp))
11906		cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
11907
11908	if (NO_FCOE(bp))
11909		cp->drv_state |= CNIC_DRV_STATE_NO_FCOE;
11910
11911	DP(BNX2X_MSG_SP, "page_size %d, tbl_offset %d, tbl_lines %d, "
11912			 "starting cid %d\n",
11913	   cp->ctx_blk_size,
11914	   cp->ctx_tbl_offset,
11915	   cp->ctx_tbl_len,
11916	   cp->starting_cid);
11917	return cp;
11918}
11919EXPORT_SYMBOL(bnx2x_cnic_probe);
11920
11921#endif /* BCM_CNIC */
11922
11923