1#
2# TI device configuration
3#
4
5config NET_VENDOR_TI
6	bool "Texas Instruments (TI) devices"
7	default y
8	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE))
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y
11	  and read the Ethernet-HOWTO, available from
12	  <http://www.tldp.org/docs.html#howto>.
13
14	  Note that the answer to this question doesn't directly affect the
15	  kernel: saying N will just cause the configurator to skip all
16	  the questions about TI devices. If you say Y, you will be asked for
17	  your specific card in the following questions.
18
19if NET_VENDOR_TI
20
21config TI_DAVINCI_EMAC
22	tristate "TI DaVinci EMAC Support"
23	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
24	select TI_DAVINCI_MDIO
25	select TI_DAVINCI_CPDMA
26	select PHYLIB
27	---help---
28	  This driver supports TI's DaVinci Ethernet .
29
30	  To compile this driver as a module, choose M here: the module
31	  will be called davinci_emac_driver.  This is recommended.
32
33config TI_DAVINCI_MDIO
34	tristate "TI DaVinci MDIO Support"
35	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE )
36	select PHYLIB
37	---help---
38	  This driver supports TI's DaVinci MDIO module.
39
40	  To compile this driver as a module, choose M here: the module
41	  will be called davinci_mdio.  This is recommended.
42
43config TI_DAVINCI_CPDMA
44	tristate "TI DaVinci CPDMA Support"
45	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
46	---help---
47	  This driver supports TI's DaVinci CPDMA dma engine.
48
49	  To compile this driver as a module, choose M here: the module
50	  will be called davinci_cpdma.  This is recommended.
51
52config TI_CPSW_PHY_SEL
53	boolean "TI CPSW Switch Phy sel Support"
54	depends on TI_CPSW
55	---help---
56	  This driver supports configuring of the phy mode connected to
57	  the CPSW.
58
59config TI_CPSW
60	tristate "TI CPSW Switch Support"
61	depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
62	select TI_DAVINCI_CPDMA
63	select TI_DAVINCI_MDIO
64	select TI_CPSW_PHY_SEL
65	select MFD_SYSCON
66	select REGMAP
67	---help---
68	  This driver supports TI's CPSW Ethernet Switch.
69
70	  To compile this driver as a module, choose M here: the module
71	  will be called cpsw.
72
73config TI_CPTS
74	boolean "TI Common Platform Time Sync (CPTS) Support"
75	depends on TI_CPSW
76	select PTP_1588_CLOCK
77	---help---
78	  This driver supports the Common Platform Time Sync unit of
79	  the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
80	  and Layer 2 packets, and the driver offers a PTP Hardware Clock.
81
82config TLAN
83	tristate "TI ThunderLAN support"
84	depends on (PCI || EISA)
85	---help---
86	  If you have a PCI Ethernet network card based on the ThunderLAN chip
87	  which is supported by this driver, say Y and read the
88	  Ethernet-HOWTO, available from
89	  <http://www.tldp.org/docs.html#howto>.
90
91	  Devices currently supported by this driver are Compaq Netelligent,
92	  Compaq NetFlex and Olicom cards.  Please read the file
93	  <file:Documentation/networking/tlan.txt> for more details.
94
95	  To compile this driver as a module, choose M here. The module
96	  will be called tlan.
97
98	  Please email feedback to <torben.mathiasen@compaq.com>.
99
100config CPMAC
101	tristate "TI AR7 CPMAC Ethernet support"
102	depends on AR7
103	select PHYLIB
104	---help---
105	  TI AR7 CPMAC Ethernet support
106
107endif # NET_VENDOR_TI
108