1#
2# PHY Layer Configuration
3#
4
5menuconfig PHYLIB
6	tristate "PHY Device support and infrastructure"
7	depends on NETDEVICES
8	help
9	  Ethernet controllers are usually attached to PHY
10	  devices.  This option provides infrastructure for
11	  managing PHY devices.
12
13if PHYLIB
14
15comment "MII PHY device drivers"
16
17config AT803X_PHY
18	tristate "Drivers for Atheros AT803X PHYs"
19	---help---
20	  Currently supports the AT8030 and AT8035 model
21
22config AMD_PHY
23	tristate "Drivers for the AMD PHYs"
24	---help---
25	  Currently supports the am79c874
26
27config AMD_XGBE_PHY
28	tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs"
29	depends on OF
30	---help---
31	  Currently supports the AMD 10GbE PHY
32
33config MARVELL_PHY
34	tristate "Drivers for Marvell PHYs"
35	---help---
36	  Currently has a driver for the 88E1011S
37	
38config DAVICOM_PHY
39	tristate "Drivers for Davicom PHYs"
40	---help---
41	  Currently supports dm9161e and dm9131
42
43config QSEMI_PHY
44	tristate "Drivers for Quality Semiconductor PHYs"
45	---help---
46	  Currently supports the qs6612
47
48config LXT_PHY
49	tristate "Drivers for the Intel LXT PHYs"
50	---help---
51	  Currently supports the lxt970, lxt971
52
53config CICADA_PHY
54	tristate "Drivers for the Cicada PHYs"
55	---help---
56	  Currently supports the cis8204
57
58config VITESSE_PHY
59        tristate "Drivers for the Vitesse PHYs"
60        ---help---
61          Currently supports the vsc8244
62
63config SMSC_PHY
64	tristate "Drivers for SMSC PHYs"
65	---help---
66	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
67
68config BROADCOM_PHY
69	tristate "Drivers for Broadcom PHYs"
70	---help---
71	  Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
72	  and BCM5482 PHYs.
73
74config BCM63XX_PHY
75	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
76	depends on BCM63XX
77	---help---
78	  Currently supports the 6348 and 6358 PHYs.
79
80config BCM7XXX_PHY
81	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
82	---help---
83	  Currently supports the BCM7366, BCM7439, BCM7445, and
84	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
85
86config BCM87XX_PHY
87	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
88	help
89	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
90
91config ICPLUS_PHY
92	tristate "Drivers for ICPlus PHYs"
93	---help---
94	  Currently supports the IP175C and IP1001 PHYs.
95
96config REALTEK_PHY
97	tristate "Drivers for Realtek PHYs"
98	---help---
99	  Supports the Realtek 821x PHY.
100
101config NATIONAL_PHY
102	tristate "Drivers for National Semiconductor PHYs"
103	---help---
104	  Currently supports the DP83865 PHY.
105
106config STE10XP
107	tristate "Driver for STMicroelectronics STe10Xp PHYs"
108	---help---
109	  This is the driver for the STe100p and STe101p PHYs.
110
111config LSI_ET1011C_PHY
112	tristate "Driver for LSI ET1011C PHY"
113	---help---
114	  Supports the LSI ET1011C PHY.
115
116config MICREL_PHY
117	tristate "Driver for Micrel PHYs"
118	---help---
119	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
120
121config FIXED_PHY
122	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
123	depends on PHYLIB=y
124	---help---
125	  Adds the platform "fixed" MDIO Bus to cover the boards that use
126	  PHYs that are not connected to the real MDIO bus.
127
128	  Currently tested with mpc866ads and mpc8349e-mitx.
129
130config MDIO_BITBANG
131	tristate "Support for bitbanged MDIO buses"
132	help
133	  This module implements the MDIO bus protocol in software,
134	  for use by low level drivers that export the ability to
135	  drive the relevant pins.
136
137	  If in doubt, say N.
138
139config MDIO_GPIO
140	tristate "Support for GPIO lib-based bitbanged MDIO buses"
141	depends on MDIO_BITBANG && GPIOLIB
142	---help---
143	  Supports GPIO lib-based MDIO busses.
144
145	  To compile this driver as a module, choose M here: the module
146	  will be called mdio-gpio.
147
148config MDIO_OCTEON
149	tristate "Support for MDIO buses on Octeon SOCs"
150	depends on CAVIUM_OCTEON_SOC
151	default y
152	help
153
154	  This module provides a driver for the Octeon MDIO busses.
155	  It is required by the Octeon Ethernet device drivers.
156
157	  If in doubt, say Y.
158
159config MDIO_SUN4I
160	tristate "Allwinner sun4i MDIO interface support"
161	depends on ARCH_SUNXI
162	help
163	  This driver supports the MDIO interface found in the network
164	  interface units of the Allwinner SoC that have an EMAC (A10,
165	  A12, A10s, etc.)
166
167config MDIO_MOXART
168        tristate "MOXA ART MDIO interface support"
169        depends on ARCH_MOXART
170        help
171          This driver supports the MDIO interface found in the network
172          interface units of the MOXA ART SoC
173
174config MDIO_BUS_MUX
175	tristate
176	depends on OF_MDIO
177	help
178	  This module provides a driver framework for MDIO bus
179	  multiplexers which connect one of several child MDIO busses
180	  to a parent bus.  Switching between child busses is done by
181	  device specific drivers.
182
183config MDIO_BUS_MUX_GPIO
184	tristate "Support for GPIO controlled MDIO bus multiplexers"
185	depends on OF_GPIO && OF_MDIO
186	select MDIO_BUS_MUX
187	help
188	  This module provides a driver for MDIO bus multiplexers that
189	  are controlled via GPIO lines.  The multiplexer connects one of
190	  several child MDIO busses to a parent bus.  Child bus
191	  selection is under the control of GPIO lines.
192
193config MDIO_BUS_MUX_MMIOREG
194	tristate "Support for MMIO device-controlled MDIO bus multiplexers"
195	depends on OF_MDIO
196	select MDIO_BUS_MUX
197	help
198	  This module provides a driver for MDIO bus multiplexers that
199	  are controlled via a simple memory-mapped device, like an FPGA.
200	  The multiplexer connects one of several child MDIO busses to a
201	  parent bus.  Child bus selection is under the control of one of
202	  the FPGA's registers.
203
204	  Currently, only 8-bit registers are supported.
205
206config MDIO_BCM_UNIMAC
207	tristate "Broadcom UniMAC MDIO bus controller"
208	depends on HAS_IOMEM
209	help
210	  This module provides a driver for the Broadcom UniMAC MDIO busses.
211	  This hardware can be found in the Broadcom GENET Ethernet MAC
212	  controllers as well as some Broadcom Ethernet switches such as the
213	  Starfighter 2 switches.
214
215endif # PHYLIB
216
217config MICREL_KS8995MA
218	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
219	depends on SPI
220