1/* 2 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family 3 * of PCI-SCSI IO processors. 4 * 5 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> 6 * 7 * This driver is derived from the Linux sym53c8xx driver. 8 * Copyright (C) 1998-2000 Gerard Roudier 9 * 10 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 11 * a port of the FreeBSD ncr driver to Linux-1.2.13. 12 * 13 * The original ncr driver has been written for 386bsd and FreeBSD by 14 * Wolfgang Stanglmeier <wolf@cologne.de> 15 * Stefan Esser <se@mi.Uni-Koeln.de> 16 * Copyright (C) 1994 Wolfgang Stanglmeier 17 * 18 * Other major contributions: 19 * 20 * NVRAM detection and reading. 21 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> 22 * 23 *----------------------------------------------------------------------------- 24 * 25 * This program is free software; you can redistribute it and/or modify 26 * it under the terms of the GNU General Public License as published by 27 * the Free Software Foundation; either version 2 of the License, or 28 * (at your option) any later version. 29 * 30 * This program is distributed in the hope that it will be useful, 31 * but WITHOUT ANY WARRANTY; without even the implied warranty of 32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 33 * GNU General Public License for more details. 34 * 35 * You should have received a copy of the GNU General Public License 36 * along with this program; if not, write to the Free Software 37 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 38 */ 39 40/* 41 * Scripts for SYMBIOS-Processor 42 * 43 * We have to know the offsets of all labels before we reach 44 * them (for forward jumps). Therefore we declare a struct 45 * here. If you make changes inside the script, 46 * 47 * DONT FORGET TO CHANGE THE LENGTHS HERE! 48 */ 49 50/* 51 * Script fragments which are loaded into the on-chip RAM 52 * of 825A, 875, 876, 895, 895A, 896 and 1010 chips. 53 * Must not exceed 4K bytes. 54 */ 55struct SYM_FWA_SCR { 56 u32 start [ 14]; 57 u32 getjob_begin [ 4]; 58 u32 getjob_end [ 4]; 59#ifdef SYM_CONF_TARGET_ROLE_SUPPORT 60 u32 select [ 6]; 61#else 62 u32 select [ 4]; 63#endif 64#if SYM_CONF_DMA_ADDRESSING_MODE == 2 65 u32 is_dmap_dirty [ 4]; 66#endif 67 u32 wf_sel_done [ 2]; 68 u32 sel_done [ 2]; 69 u32 send_ident [ 2]; 70#ifdef SYM_CONF_IARB_SUPPORT 71 u32 select2 [ 8]; 72#else 73 u32 select2 [ 2]; 74#endif 75 u32 command [ 2]; 76 u32 dispatch [ 28]; 77 u32 sel_no_cmd [ 10]; 78 u32 init [ 6]; 79 u32 clrack [ 4]; 80 u32 datai_done [ 10]; 81 u32 datai_done_wsr [ 20]; 82 u32 datao_done [ 10]; 83 u32 datao_done_wss [ 6]; 84 u32 datai_phase [ 4]; 85 u32 datao_phase [ 6]; 86 u32 msg_in [ 2]; 87 u32 msg_in2 [ 10]; 88#ifdef SYM_CONF_IARB_SUPPORT 89 u32 status [ 14]; 90#else 91 u32 status [ 10]; 92#endif 93 u32 complete [ 6]; 94 u32 complete2 [ 12]; 95 u32 done [ 14]; 96 u32 done_end [ 2]; 97 u32 complete_error [ 4]; 98 u32 save_dp [ 12]; 99 u32 restore_dp [ 8]; 100 u32 disconnect [ 12]; 101#ifdef SYM_CONF_IARB_SUPPORT 102 u32 idle [ 4]; 103#else 104 u32 idle [ 2]; 105#endif 106#ifdef SYM_CONF_IARB_SUPPORT 107 u32 ungetjob [ 6]; 108#else 109 u32 ungetjob [ 4]; 110#endif 111#ifdef SYM_CONF_TARGET_ROLE_SUPPORT 112 u32 reselect [ 4]; 113#else 114 u32 reselect [ 2]; 115#endif 116 u32 reselected [ 22]; 117 u32 resel_scntl4 [ 20]; 118 u32 resel_lun0 [ 6]; 119#if SYM_CONF_MAX_TASK*4 > 512 120 u32 resel_tag [ 26]; 121#elif SYM_CONF_MAX_TASK*4 > 256 122 u32 resel_tag [ 20]; 123#else 124 u32 resel_tag [ 16]; 125#endif 126 u32 resel_dsa [ 2]; 127 u32 resel_dsa1 [ 4]; 128 u32 resel_no_tag [ 6]; 129 u32 data_in [SYM_CONF_MAX_SG * 2]; 130 u32 data_in2 [ 4]; 131 u32 data_out [SYM_CONF_MAX_SG * 2]; 132 u32 data_out2 [ 4]; 133 u32 pm0_data [ 12]; 134 u32 pm0_data_out [ 6]; 135 u32 pm0_data_end [ 6]; 136 u32 pm1_data [ 12]; 137 u32 pm1_data_out [ 6]; 138 u32 pm1_data_end [ 6]; 139}; 140 141/* 142 * Script fragments which stay in main memory for all chips 143 * except for chips that support 8K on-chip RAM. 144 */ 145struct SYM_FWB_SCR { 146 u32 start64 [ 2]; 147 u32 no_data [ 2]; 148#ifdef SYM_CONF_TARGET_ROLE_SUPPORT 149 u32 sel_for_abort [ 18]; 150#else 151 u32 sel_for_abort [ 16]; 152#endif 153 u32 sel_for_abort_1 [ 2]; 154 u32 msg_in_etc [ 12]; 155 u32 msg_received [ 4]; 156 u32 msg_weird_seen [ 4]; 157 u32 msg_extended [ 20]; 158 u32 msg_bad [ 6]; 159 u32 msg_weird [ 4]; 160 u32 msg_weird1 [ 8]; 161 162 u32 wdtr_resp [ 6]; 163 u32 send_wdtr [ 4]; 164 u32 sdtr_resp [ 6]; 165 u32 send_sdtr [ 4]; 166 u32 ppr_resp [ 6]; 167 u32 send_ppr [ 4]; 168 u32 nego_bad_phase [ 4]; 169 u32 msg_out [ 4]; 170 u32 msg_out_done [ 4]; 171 u32 data_ovrun [ 2]; 172 u32 data_ovrun1 [ 22]; 173 u32 data_ovrun2 [ 8]; 174 u32 abort_resel [ 16]; 175 u32 resend_ident [ 4]; 176 u32 ident_break [ 4]; 177 u32 ident_break_atn [ 4]; 178 u32 sdata_in [ 6]; 179 u32 resel_bad_lun [ 4]; 180 u32 bad_i_t_l [ 4]; 181 u32 bad_i_t_l_q [ 4]; 182 u32 bad_status [ 6]; 183 u32 pm_handle [ 20]; 184 u32 pm_handle1 [ 4]; 185 u32 pm_save [ 4]; 186 u32 pm0_save [ 12]; 187 u32 pm_save_end [ 4]; 188 u32 pm1_save [ 14]; 189 190 /* WSR handling */ 191 u32 pm_wsr_handle [ 38]; 192 u32 wsr_ma_helper [ 4]; 193 194 /* Data area */ 195 u32 zero [ 1]; 196 u32 scratch [ 1]; 197 u32 pm0_data_addr [ 1]; 198 u32 pm1_data_addr [ 1]; 199 u32 done_pos [ 1]; 200 u32 startpos [ 1]; 201 u32 targtbl [ 1]; 202}; 203 204/* 205 * Script fragments used at initialisations. 206 * Only runs out of main memory. 207 */ 208struct SYM_FWZ_SCR { 209 u32 snooptest [ 6]; 210 u32 snoopend [ 2]; 211}; 212 213static struct SYM_FWA_SCR SYM_FWA_SCR = { 214/*--------------------------< START >----------------------------*/ { 215 /* 216 * Switch the LED on. 217 * Will be patched with a NO_OP if LED 218 * not needed or not desired. 219 */ 220 SCR_REG_REG (gpreg, SCR_AND, 0xfe), 221 0, 222 /* 223 * Clear SIGP. 224 */ 225 SCR_FROM_REG (ctest2), 226 0, 227 /* 228 * Stop here if the C code wants to perform 229 * some error recovery procedure manually. 230 * (Indicate this by setting SEM in ISTAT) 231 */ 232 SCR_FROM_REG (istat), 233 0, 234 /* 235 * Report to the C code the next position in 236 * the start queue the SCRIPTS will schedule. 237 * The C code must not change SCRATCHA. 238 */ 239 SCR_LOAD_ABS (scratcha, 4), 240 PADDR_B (startpos), 241 SCR_INT ^ IFTRUE (MASK (SEM, SEM)), 242 SIR_SCRIPT_STOPPED, 243 /* 244 * Start the next job. 245 * 246 * @DSA = start point for this job. 247 * SCRATCHA = address of this job in the start queue. 248 * 249 * We will restore startpos with SCRATCHA if we fails the 250 * arbitration or if it is the idle job. 251 * 252 * The below GETJOB_BEGIN to GETJOB_END section of SCRIPTS 253 * is a critical path. If it is partially executed, it then 254 * may happen that the job address is not yet in the DSA 255 * and the next queue position points to the next JOB. 256 */ 257 SCR_LOAD_ABS (dsa, 4), 258 PADDR_B (startpos), 259 SCR_LOAD_REL (temp, 4), 260 4, 261}/*-------------------------< GETJOB_BEGIN >---------------------*/,{ 262 SCR_STORE_ABS (temp, 4), 263 PADDR_B (startpos), 264 SCR_LOAD_REL (dsa, 4), 265 0, 266}/*-------------------------< GETJOB_END >-----------------------*/,{ 267 SCR_LOAD_REL (temp, 4), 268 0, 269 SCR_RETURN, 270 0, 271}/*-------------------------< SELECT >---------------------------*/,{ 272 /* 273 * DSA contains the address of a scheduled 274 * data structure. 275 * 276 * SCRATCHA contains the address of the start queue 277 * entry which points to the next job. 278 * 279 * Set Initiator mode. 280 * 281 * (Target mode is left as an exercise for the reader) 282 */ 283#ifdef SYM_CONF_TARGET_ROLE_SUPPORT 284 SCR_CLR (SCR_TRG), 285 0, 286#endif 287 /* 288 * And try to select this target. 289 */ 290 SCR_SEL_TBL_ATN ^ offsetof (struct sym_dsb, select), 291 PADDR_A (ungetjob), 292 /* 293 * Now there are 4 possibilities: 294 * 295 * (1) The chip loses arbitration. 296 * This is ok, because it will try again, 297 * when the bus becomes idle. 298 * (But beware of the timeout function!) 299 * 300 * (2) The chip is reselected. 301 * Then the script processor takes the jump 302 * to the RESELECT label. 303 * 304 * (3) The chip wins arbitration. 305 * Then it will execute SCRIPTS instruction until 306 * the next instruction that checks SCSI phase. 307 * Then will stop and wait for selection to be 308 * complete or selection time-out to occur. 309 * 310 * After having won arbitration, the SCRIPTS 311 * processor is able to execute instructions while 312 * the SCSI core is performing SCSI selection. 313 */ 314 /* 315 * Initialize the status registers 316 */ 317 SCR_LOAD_REL (scr0, 4), 318 offsetof (struct sym_ccb, phys.head.status), 319 /* 320 * We may need help from CPU if the DMA segment 321 * registers aren't up-to-date for this IO. 322 * Patched with NOOP for chips that donnot 323 * support DAC addressing. 324 */ 325#if SYM_CONF_DMA_ADDRESSING_MODE == 2 326}/*-------------------------< IS_DMAP_DIRTY >--------------------*/,{ 327 SCR_FROM_REG (HX_REG), 328 0, 329 SCR_INT ^ IFTRUE (MASK (HX_DMAP_DIRTY, HX_DMAP_DIRTY)), 330 SIR_DMAP_DIRTY, 331#endif 332}/*-------------------------< WF_SEL_DONE >----------------------*/,{ 333 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), 334 SIR_SEL_ATN_NO_MSG_OUT, 335}/*-------------------------< SEL_DONE >-------------------------*/,{ 336 /* 337 * C1010-33 errata work-around. 338 * Due to a race, the SCSI core may not have 339 * loaded SCNTL3 on SEL_TBL instruction. 340 * We reload it once phase is stable. 341 * Patched with a NOOP for other chips. 342 */ 343 SCR_LOAD_REL (scntl3, 1), 344 offsetof(struct sym_dsb, select.sel_scntl3), 345}/*-------------------------< SEND_IDENT >-----------------------*/,{ 346 /* 347 * Selection complete. 348 * Send the IDENTIFY and possibly the TAG message 349 * and negotiation message if present. 350 */ 351 SCR_MOVE_TBL ^ SCR_MSG_OUT, 352 offsetof (struct sym_dsb, smsg), 353}/*-------------------------< SELECT2 >--------------------------*/,{ 354#ifdef SYM_CONF_IARB_SUPPORT 355 /* 356 * Set IMMEDIATE ARBITRATION if we have been given 357 * a hint to do so. (Some job to do after this one). 358 */ 359 SCR_FROM_REG (HF_REG), 360 0, 361 SCR_JUMPR ^ IFFALSE (MASK (HF_HINT_IARB, HF_HINT_IARB)), 362 8, 363 SCR_REG_REG (scntl1, SCR_OR, IARB), 364 0, 365#endif 366 /* 367 * Anticipate the COMMAND phase. 368 * This is the PHASE we expect at this point. 369 */ 370 SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)), 371 PADDR_A (sel_no_cmd), 372}/*-------------------------< COMMAND >--------------------------*/,{ 373 /* 374 * ... and send the command 375 */ 376 SCR_MOVE_TBL ^ SCR_COMMAND, 377 offsetof (struct sym_dsb, cmd), 378}/*-------------------------< DISPATCH >-------------------------*/,{ 379 /* 380 * MSG_IN is the only phase that shall be 381 * entered at least once for each (re)selection. 382 * So we test it first. 383 */ 384 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 385 PADDR_A (msg_in), 386 SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT)), 387 PADDR_A (datao_phase), 388 SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN)), 389 PADDR_A (datai_phase), 390 SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), 391 PADDR_A (status), 392 SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), 393 PADDR_A (command), 394 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), 395 PADDR_B (msg_out), 396 /* 397 * Discard as many illegal phases as 398 * required and tell the C code about. 399 */ 400 SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_OUT)), 401 16, 402 SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, 403 HADDR_1 (scratch), 404 SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_OUT)), 405 -16, 406 SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_IN)), 407 16, 408 SCR_MOVE_ABS (1) ^ SCR_ILG_IN, 409 HADDR_1 (scratch), 410 SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_IN)), 411 -16, 412 SCR_INT, 413 SIR_BAD_PHASE, 414 SCR_JUMP, 415 PADDR_A (dispatch), 416}/*-------------------------< SEL_NO_CMD >-----------------------*/,{ 417 /* 418 * The target does not switch to command 419 * phase after IDENTIFY has been sent. 420 * 421 * If it stays in MSG OUT phase send it 422 * the IDENTIFY again. 423 */ 424 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 425 PADDR_B (resend_ident), 426 /* 427 * If target does not switch to MSG IN phase 428 * and we sent a negotiation, assert the 429 * failure immediately. 430 */ 431 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 432 PADDR_A (dispatch), 433 SCR_FROM_REG (HS_REG), 434 0, 435 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 436 SIR_NEGO_FAILED, 437 /* 438 * Jump to dispatcher. 439 */ 440 SCR_JUMP, 441 PADDR_A (dispatch), 442}/*-------------------------< INIT >-----------------------------*/,{ 443 /* 444 * Wait for the SCSI RESET signal to be 445 * inactive before restarting operations, 446 * since the chip may hang on SEL_ATN 447 * if SCSI RESET is active. 448 */ 449 SCR_FROM_REG (sstat0), 450 0, 451 SCR_JUMPR ^ IFTRUE (MASK (IRST, IRST)), 452 -16, 453 SCR_JUMP, 454 PADDR_A (start), 455}/*-------------------------< CLRACK >---------------------------*/,{ 456 /* 457 * Terminate possible pending message phase. 458 */ 459 SCR_CLR (SCR_ACK), 460 0, 461 SCR_JUMP, 462 PADDR_A (dispatch), 463}/*-------------------------< DATAI_DONE >-----------------------*/,{ 464 /* 465 * Save current pointer to LASTP. 466 */ 467 SCR_STORE_REL (temp, 4), 468 offsetof (struct sym_ccb, phys.head.lastp), 469 /* 470 * If the SWIDE is not full, jump to dispatcher. 471 * We anticipate a STATUS phase. 472 */ 473 SCR_FROM_REG (scntl2), 474 0, 475 SCR_JUMP ^ IFTRUE (MASK (WSR, WSR)), 476 PADDR_A (datai_done_wsr), 477 SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), 478 PADDR_A (status), 479 SCR_JUMP, 480 PADDR_A (dispatch), 481}/*-------------------------< DATAI_DONE_WSR >-------------------*/,{ 482 /* 483 * The SWIDE is full. 484 * Clear this condition. 485 */ 486 SCR_REG_REG (scntl2, SCR_OR, WSR), 487 0, 488 /* 489 * We are expecting an IGNORE RESIDUE message 490 * from the device, otherwise we are in data 491 * overrun condition. Check against MSG_IN phase. 492 */ 493 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), 494 SIR_SWIDE_OVERRUN, 495 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 496 PADDR_A (dispatch), 497 /* 498 * We are in MSG_IN phase, 499 * Read the first byte of the message. 500 * If it is not an IGNORE RESIDUE message, 501 * signal overrun and jump to message 502 * processing. 503 */ 504 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 505 HADDR_1 (msgin[0]), 506 SCR_INT ^ IFFALSE (DATA (M_IGN_RESIDUE)), 507 SIR_SWIDE_OVERRUN, 508 SCR_JUMP ^ IFFALSE (DATA (M_IGN_RESIDUE)), 509 PADDR_A (msg_in2), 510 /* 511 * We got the message we expected. 512 * Read the 2nd byte, and jump to dispatcher. 513 */ 514 SCR_CLR (SCR_ACK), 515 0, 516 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 517 HADDR_1 (msgin[1]), 518 SCR_CLR (SCR_ACK), 519 0, 520 SCR_JUMP, 521 PADDR_A (dispatch), 522}/*-------------------------< DATAO_DONE >-----------------------*/,{ 523 /* 524 * Save current pointer to LASTP. 525 */ 526 SCR_STORE_REL (temp, 4), 527 offsetof (struct sym_ccb, phys.head.lastp), 528 /* 529 * If the SODL is not full jump to dispatcher. 530 * We anticipate a STATUS phase. 531 */ 532 SCR_FROM_REG (scntl2), 533 0, 534 SCR_JUMP ^ IFTRUE (MASK (WSS, WSS)), 535 PADDR_A (datao_done_wss), 536 SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), 537 PADDR_A (status), 538 SCR_JUMP, 539 PADDR_A (dispatch), 540}/*-------------------------< DATAO_DONE_WSS >-------------------*/,{ 541 /* 542 * The SODL is full, clear this condition. 543 */ 544 SCR_REG_REG (scntl2, SCR_OR, WSS), 545 0, 546 /* 547 * And signal a DATA UNDERRUN condition 548 * to the C code. 549 */ 550 SCR_INT, 551 SIR_SODL_UNDERRUN, 552 SCR_JUMP, 553 PADDR_A (dispatch), 554}/*-------------------------< DATAI_PHASE >----------------------*/,{ 555 /* 556 * Jump to current pointer. 557 */ 558 SCR_LOAD_REL (temp, 4), 559 offsetof (struct sym_ccb, phys.head.lastp), 560 SCR_RETURN, 561 0, 562}/*-------------------------< DATAO_PHASE >----------------------*/,{ 563 /* 564 * C1010-66 errata work-around. 565 * Extra clocks of data hold must be inserted 566 * in DATA OUT phase on 33 MHz PCI BUS. 567 * Patched with a NOOP for other chips. 568 */ 569 SCR_REG_REG (scntl4, SCR_OR, (XCLKH_DT|XCLKH_ST)), 570 0, 571 /* 572 * Jump to current pointer. 573 */ 574 SCR_LOAD_REL (temp, 4), 575 offsetof (struct sym_ccb, phys.head.lastp), 576 SCR_RETURN, 577 0, 578}/*-------------------------< MSG_IN >---------------------------*/,{ 579 /* 580 * Get the first byte of the message. 581 * 582 * The script processor doesn't negate the 583 * ACK signal after this transfer. 584 */ 585 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 586 HADDR_1 (msgin[0]), 587}/*-------------------------< MSG_IN2 >--------------------------*/,{ 588 /* 589 * Check first against 1 byte messages 590 * that we handle from SCRIPTS. 591 */ 592 SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)), 593 PADDR_A (complete), 594 SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)), 595 PADDR_A (disconnect), 596 SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)), 597 PADDR_A (save_dp), 598 SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)), 599 PADDR_A (restore_dp), 600 /* 601 * We handle all other messages from the 602 * C code, so no need to waste on-chip RAM 603 * for those ones. 604 */ 605 SCR_JUMP, 606 PADDR_B (msg_in_etc), 607}/*-------------------------< STATUS >---------------------------*/,{ 608 /* 609 * get the status 610 */ 611 SCR_MOVE_ABS (1) ^ SCR_STATUS, 612 HADDR_1 (scratch), 613#ifdef SYM_CONF_IARB_SUPPORT 614 /* 615 * If STATUS is not GOOD, clear IMMEDIATE ARBITRATION, 616 * since we may have to tamper the start queue from 617 * the C code. 618 */ 619 SCR_JUMPR ^ IFTRUE (DATA (S_GOOD)), 620 8, 621 SCR_REG_REG (scntl1, SCR_AND, ~IARB), 622 0, 623#endif 624 /* 625 * save status to scsi_status. 626 * mark as complete. 627 */ 628 SCR_TO_REG (SS_REG), 629 0, 630 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 631 0, 632 /* 633 * Anticipate the MESSAGE PHASE for 634 * the TASK COMPLETE message. 635 */ 636 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 637 PADDR_A (msg_in), 638 SCR_JUMP, 639 PADDR_A (dispatch), 640}/*-------------------------< COMPLETE >-------------------------*/,{ 641 /* 642 * Complete message. 643 * 644 * When we terminate the cycle by clearing ACK, 645 * the target may disconnect immediately. 646 * 647 * We don't want to be told of an "unexpected disconnect", 648 * so we disable this feature. 649 */ 650 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 651 0, 652 /* 653 * Terminate cycle ... 654 */ 655 SCR_CLR (SCR_ACK|SCR_ATN), 656 0, 657 /* 658 * ... and wait for the disconnect. 659 */ 660 SCR_WAIT_DISC, 661 0, 662}/*-------------------------< COMPLETE2 >------------------------*/,{ 663 /* 664 * Save host status. 665 */ 666 SCR_STORE_REL (scr0, 4), 667 offsetof (struct sym_ccb, phys.head.status), 668 /* 669 * Some bridges may reorder DMA writes to memory. 670 * We donnot want the CPU to deal with completions 671 * without all the posted write having been flushed 672 * to memory. This DUMMY READ should flush posted 673 * buffers prior to the CPU having to deal with 674 * completions. 675 */ 676 SCR_LOAD_REL (scr0, 4), /* DUMMY READ */ 677 offsetof (struct sym_ccb, phys.head.status), 678 679 /* 680 * If command resulted in not GOOD status, 681 * call the C code if needed. 682 */ 683 SCR_FROM_REG (SS_REG), 684 0, 685 SCR_CALL ^ IFFALSE (DATA (S_GOOD)), 686 PADDR_B (bad_status), 687 /* 688 * If we performed an auto-sense, call 689 * the C code to synchronyze task aborts 690 * with UNIT ATTENTION conditions. 691 */ 692 SCR_FROM_REG (HF_REG), 693 0, 694 SCR_JUMP ^ IFFALSE (MASK (0 ,(HF_SENSE|HF_EXT_ERR))), 695 PADDR_A (complete_error), 696}/*-------------------------< DONE >-----------------------------*/,{ 697 /* 698 * Copy the DSA to the DONE QUEUE and 699 * signal completion to the host. 700 * If we are interrupted between DONE 701 * and DONE_END, we must reset, otherwise 702 * the completed CCB may be lost. 703 */ 704 SCR_STORE_ABS (dsa, 4), 705 PADDR_B (scratch), 706 SCR_LOAD_ABS (dsa, 4), 707 PADDR_B (done_pos), 708 SCR_LOAD_ABS (scratcha, 4), 709 PADDR_B (scratch), 710 SCR_STORE_REL (scratcha, 4), 711 0, 712 /* 713 * The instruction below reads the DONE QUEUE next 714 * free position from memory. 715 * In addition it ensures that all PCI posted writes 716 * are flushed and so the DSA value of the done 717 * CCB is visible by the CPU before INTFLY is raised. 718 */ 719 SCR_LOAD_REL (scratcha, 4), 720 4, 721 SCR_INT_FLY, 722 0, 723 SCR_STORE_ABS (scratcha, 4), 724 PADDR_B (done_pos), 725}/*-------------------------< DONE_END >-------------------------*/,{ 726 SCR_JUMP, 727 PADDR_A (start), 728}/*-------------------------< COMPLETE_ERROR >-------------------*/,{ 729 SCR_LOAD_ABS (scratcha, 4), 730 PADDR_B (startpos), 731 SCR_INT, 732 SIR_COMPLETE_ERROR, 733}/*-------------------------< SAVE_DP >--------------------------*/,{ 734 /* 735 * Clear ACK immediately. 736 * No need to delay it. 737 */ 738 SCR_CLR (SCR_ACK), 739 0, 740 /* 741 * Keep track we received a SAVE DP, so 742 * we will switch to the other PM context 743 * on the next PM since the DP may point 744 * to the current PM context. 745 */ 746 SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED), 747 0, 748 /* 749 * SAVE_DP message: 750 * Copy LASTP to SAVEP. 751 */ 752 SCR_LOAD_REL (scratcha, 4), 753 offsetof (struct sym_ccb, phys.head.lastp), 754 SCR_STORE_REL (scratcha, 4), 755 offsetof (struct sym_ccb, phys.head.savep), 756 /* 757 * Anticipate the MESSAGE PHASE for 758 * the DISCONNECT message. 759 */ 760 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 761 PADDR_A (msg_in), 762 SCR_JUMP, 763 PADDR_A (dispatch), 764}/*-------------------------< RESTORE_DP >-----------------------*/,{ 765 /* 766 * Clear ACK immediately. 767 * No need to delay it. 768 */ 769 SCR_CLR (SCR_ACK), 770 0, 771 /* 772 * Copy SAVEP to LASTP. 773 */ 774 SCR_LOAD_REL (scratcha, 4), 775 offsetof (struct sym_ccb, phys.head.savep), 776 SCR_STORE_REL (scratcha, 4), 777 offsetof (struct sym_ccb, phys.head.lastp), 778 SCR_JUMP, 779 PADDR_A (dispatch), 780}/*-------------------------< DISCONNECT >-----------------------*/,{ 781 /* 782 * DISCONNECTing ... 783 * 784 * disable the "unexpected disconnect" feature, 785 * and remove the ACK signal. 786 */ 787 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 788 0, 789 SCR_CLR (SCR_ACK|SCR_ATN), 790 0, 791 /* 792 * Wait for the disconnect. 793 */ 794 SCR_WAIT_DISC, 795 0, 796 /* 797 * Status is: DISCONNECTED. 798 */ 799 SCR_LOAD_REG (HS_REG, HS_DISCONNECT), 800 0, 801 /* 802 * Save host status. 803 */ 804 SCR_STORE_REL (scr0, 4), 805 offsetof (struct sym_ccb, phys.head.status), 806 SCR_JUMP, 807 PADDR_A (start), 808}/*-------------------------< IDLE >-----------------------------*/,{ 809 /* 810 * Nothing to do? 811 * Switch the LED off and wait for reselect. 812 * Will be patched with a NO_OP if LED 813 * not needed or not desired. 814 */ 815 SCR_REG_REG (gpreg, SCR_OR, 0x01), 816 0, 817#ifdef SYM_CONF_IARB_SUPPORT 818 SCR_JUMPR, 819 8, 820#endif 821}/*-------------------------< UNGETJOB >-------------------------*/,{ 822#ifdef SYM_CONF_IARB_SUPPORT 823 /* 824 * Set IMMEDIATE ARBITRATION, for the next time. 825 * This will give us better chance to win arbitration 826 * for the job we just wanted to do. 827 */ 828 SCR_REG_REG (scntl1, SCR_OR, IARB), 829 0, 830#endif 831 /* 832 * We are not able to restart the SCRIPTS if we are 833 * interrupted and these instruction haven't been 834 * all executed. BTW, this is very unlikely to 835 * happen, but we check that from the C code. 836 */ 837 SCR_LOAD_REG (dsa, 0xff), 838 0, 839 SCR_STORE_ABS (scratcha, 4), 840 PADDR_B (startpos), 841}/*-------------------------< RESELECT >-------------------------*/,{ 842#ifdef SYM_CONF_TARGET_ROLE_SUPPORT 843 /* 844 * Make sure we are in initiator mode. 845 */ 846 SCR_CLR (SCR_TRG), 847 0, 848#endif 849 /* 850 * Sleep waiting for a reselection. 851 */ 852 SCR_WAIT_RESEL, 853 PADDR_A(start), 854}/*-------------------------< RESELECTED >-----------------------*/,{ 855 /* 856 * Switch the LED on. 857 * Will be patched with a NO_OP if LED 858 * not needed or not desired. 859 */ 860 SCR_REG_REG (gpreg, SCR_AND, 0xfe), 861 0, 862 /* 863 * load the target id into the sdid 864 */ 865 SCR_REG_SFBR (ssid, SCR_AND, 0x8F), 866 0, 867 SCR_TO_REG (sdid), 868 0, 869 /* 870 * Load the target control block address 871 */ 872 SCR_LOAD_ABS (dsa, 4), 873 PADDR_B (targtbl), 874 SCR_SFBR_REG (dsa, SCR_SHL, 0), 875 0, 876 SCR_REG_REG (dsa, SCR_SHL, 0), 877 0, 878 SCR_REG_REG (dsa, SCR_AND, 0x3c), 879 0, 880 SCR_LOAD_REL (dsa, 4), 881 0, 882 /* 883 * We expect MESSAGE IN phase. 884 * If not, get help from the C code. 885 */ 886 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), 887 SIR_RESEL_NO_MSG_IN, 888 /* 889 * Load the legacy synchronous transfer registers. 890 */ 891 SCR_LOAD_REL (scntl3, 1), 892 offsetof(struct sym_tcb, head.wval), 893 SCR_LOAD_REL (sxfer, 1), 894 offsetof(struct sym_tcb, head.sval), 895}/*-------------------------< RESEL_SCNTL4 >---------------------*/,{ 896 /* 897 * The C1010 uses a new synchronous timing scheme. 898 * Will be patched with a NO_OP if not a C1010. 899 */ 900 SCR_LOAD_REL (scntl4, 1), 901 offsetof(struct sym_tcb, head.uval), 902 /* 903 * Get the IDENTIFY message. 904 */ 905 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 906 HADDR_1 (msgin), 907 /* 908 * If IDENTIFY LUN #0, use a faster path 909 * to find the LCB structure. 910 */ 911 SCR_JUMP ^ IFTRUE (MASK (0x80, 0xbf)), 912 PADDR_A (resel_lun0), 913 /* 914 * If message isn't an IDENTIFY, 915 * tell the C code about. 916 */ 917 SCR_INT ^ IFFALSE (MASK (0x80, 0x80)), 918 SIR_RESEL_NO_IDENTIFY, 919 /* 920 * It is an IDENTIFY message, 921 * Load the LUN control block address. 922 */ 923 SCR_LOAD_REL (dsa, 4), 924 offsetof(struct sym_tcb, head.luntbl_sa), 925 SCR_SFBR_REG (dsa, SCR_SHL, 0), 926 0, 927 SCR_REG_REG (dsa, SCR_SHL, 0), 928 0, 929 SCR_REG_REG (dsa, SCR_AND, 0xfc), 930 0, 931 SCR_LOAD_REL (dsa, 4), 932 0, 933 SCR_JUMPR, 934 8, 935}/*-------------------------< RESEL_LUN0 >-----------------------*/,{ 936 /* 937 * LUN 0 special case (but usual one :)) 938 */ 939 SCR_LOAD_REL (dsa, 4), 940 offsetof(struct sym_tcb, head.lun0_sa), 941 /* 942 * Jump indirectly to the reselect action for this LUN. 943 */ 944 SCR_LOAD_REL (temp, 4), 945 offsetof(struct sym_lcb, head.resel_sa), 946 SCR_RETURN, 947 0, 948 /* In normal situations, we jump to RESEL_TAG or RESEL_NO_TAG */ 949}/*-------------------------< RESEL_TAG >------------------------*/,{ 950 /* 951 * ACK the IDENTIFY previously received. 952 */ 953 SCR_CLR (SCR_ACK), 954 0, 955 /* 956 * It shall be a tagged command. 957 * Read SIMPLE+TAG. 958 * The C code will deal with errors. 959 * Aggressive optimization, isn't it? :) 960 */ 961 SCR_MOVE_ABS (2) ^ SCR_MSG_IN, 962 HADDR_1 (msgin), 963 /* 964 * Load the pointer to the tagged task 965 * table for this LUN. 966 */ 967 SCR_LOAD_REL (dsa, 4), 968 offsetof(struct sym_lcb, head.itlq_tbl_sa), 969 /* 970 * The SIDL still contains the TAG value. 971 * Aggressive optimization, isn't it? :):) 972 */ 973 SCR_REG_SFBR (sidl, SCR_SHL, 0), 974 0, 975#if SYM_CONF_MAX_TASK*4 > 512 976 SCR_JUMPR ^ IFFALSE (CARRYSET), 977 8, 978 SCR_REG_REG (dsa1, SCR_OR, 2), 979 0, 980 SCR_REG_REG (sfbr, SCR_SHL, 0), 981 0, 982 SCR_JUMPR ^ IFFALSE (CARRYSET), 983 8, 984 SCR_REG_REG (dsa1, SCR_OR, 1), 985 0, 986#elif SYM_CONF_MAX_TASK*4 > 256 987 SCR_JUMPR ^ IFFALSE (CARRYSET), 988 8, 989 SCR_REG_REG (dsa1, SCR_OR, 1), 990 0, 991#endif 992 /* 993 * Retrieve the DSA of this task. 994 * JUMP indirectly to the restart point of the CCB. 995 */ 996 SCR_SFBR_REG (dsa, SCR_AND, 0xfc), 997 0, 998 SCR_LOAD_REL (dsa, 4), 999 0, 1000 SCR_LOAD_REL (temp, 4), 1001 offsetof(struct sym_ccb, phys.head.go.restart), 1002 SCR_RETURN, 1003 0, 1004 /* In normal situations we branch to RESEL_DSA */ 1005}/*-------------------------< RESEL_DSA >------------------------*/,{ 1006 /* 1007 * ACK the IDENTIFY or TAG previously received. 1008 */ 1009 SCR_CLR (SCR_ACK), 1010 0, 1011}/*-------------------------< RESEL_DSA1 >-----------------------*/,{ 1012 /* 1013 * Initialize the status registers 1014 */ 1015 SCR_LOAD_REL (scr0, 4), 1016 offsetof (struct sym_ccb, phys.head.status), 1017 /* 1018 * Jump to dispatcher. 1019 */ 1020 SCR_JUMP, 1021 PADDR_A (dispatch), 1022}/*-------------------------< RESEL_NO_TAG >---------------------*/,{ 1023 /* 1024 * Load the DSA with the unique ITL task. 1025 */ 1026 SCR_LOAD_REL (dsa, 4), 1027 offsetof(struct sym_lcb, head.itl_task_sa), 1028 /* 1029 * JUMP indirectly to the restart point of the CCB. 1030 */ 1031 SCR_LOAD_REL (temp, 4), 1032 offsetof(struct sym_ccb, phys.head.go.restart), 1033 SCR_RETURN, 1034 0, 1035 /* In normal situations we branch to RESEL_DSA */ 1036}/*-------------------------< DATA_IN >--------------------------*/,{ 1037/* 1038 * Because the size depends on the 1039 * #define SYM_CONF_MAX_SG parameter, 1040 * it is filled in at runtime. 1041 * 1042 * ##===========< i=0; i<SYM_CONF_MAX_SG >========= 1043 * || SCR_CHMOV_TBL ^ SCR_DATA_IN, 1044 * || offsetof (struct sym_dsb, data[ i]), 1045 * ##========================================== 1046 */ 10470 1048}/*-------------------------< DATA_IN2 >-------------------------*/,{ 1049 SCR_CALL, 1050 PADDR_A (datai_done), 1051 SCR_JUMP, 1052 PADDR_B (data_ovrun), 1053}/*-------------------------< DATA_OUT >-------------------------*/,{ 1054/* 1055 * Because the size depends on the 1056 * #define SYM_CONF_MAX_SG parameter, 1057 * it is filled in at runtime. 1058 * 1059 * ##===========< i=0; i<SYM_CONF_MAX_SG >========= 1060 * || SCR_CHMOV_TBL ^ SCR_DATA_OUT, 1061 * || offsetof (struct sym_dsb, data[ i]), 1062 * ##========================================== 1063 */ 10640 1065}/*-------------------------< DATA_OUT2 >------------------------*/,{ 1066 SCR_CALL, 1067 PADDR_A (datao_done), 1068 SCR_JUMP, 1069 PADDR_B (data_ovrun), 1070}/*-------------------------< PM0_DATA >-------------------------*/,{ 1071 /* 1072 * Read our host flags to SFBR, so we will be able 1073 * to check against the data direction we expect. 1074 */ 1075 SCR_FROM_REG (HF_REG), 1076 0, 1077 /* 1078 * Check against actual DATA PHASE. 1079 */ 1080 SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 1081 PADDR_A (pm0_data_out), 1082 /* 1083 * Actual phase is DATA IN. 1084 * Check against expected direction. 1085 */ 1086 SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), 1087 PADDR_B (data_ovrun), 1088 /* 1089 * Keep track we are moving data from the 1090 * PM0 DATA mini-script. 1091 */ 1092 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), 1093 0, 1094 /* 1095 * Move the data to memory. 1096 */ 1097 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1098 offsetof (struct sym_ccb, phys.pm0.sg), 1099 SCR_JUMP, 1100 PADDR_A (pm0_data_end), 1101}/*-------------------------< PM0_DATA_OUT >---------------------*/,{ 1102 /* 1103 * Actual phase is DATA OUT. 1104 * Check against expected direction. 1105 */ 1106 SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), 1107 PADDR_B (data_ovrun), 1108 /* 1109 * Keep track we are moving data from the 1110 * PM0 DATA mini-script. 1111 */ 1112 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), 1113 0, 1114 /* 1115 * Move the data from memory. 1116 */ 1117 SCR_CHMOV_TBL ^ SCR_DATA_OUT, 1118 offsetof (struct sym_ccb, phys.pm0.sg), 1119}/*-------------------------< PM0_DATA_END >---------------------*/,{ 1120 /* 1121 * Clear the flag that told we were moving 1122 * data from the PM0 DATA mini-script. 1123 */ 1124 SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM0)), 1125 0, 1126 /* 1127 * Return to the previous DATA script which 1128 * is guaranteed by design (if no bug) to be 1129 * the main DATA script for this transfer. 1130 */ 1131 SCR_LOAD_REL (temp, 4), 1132 offsetof (struct sym_ccb, phys.pm0.ret), 1133 SCR_RETURN, 1134 0, 1135}/*-------------------------< PM1_DATA >-------------------------*/,{ 1136 /* 1137 * Read our host flags to SFBR, so we will be able 1138 * to check against the data direction we expect. 1139 */ 1140 SCR_FROM_REG (HF_REG), 1141 0, 1142 /* 1143 * Check against actual DATA PHASE. 1144 */ 1145 SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 1146 PADDR_A (pm1_data_out), 1147 /* 1148 * Actual phase is DATA IN. 1149 * Check against expected direction. 1150 */ 1151 SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), 1152 PADDR_B (data_ovrun), 1153 /* 1154 * Keep track we are moving data from the 1155 * PM1 DATA mini-script. 1156 */ 1157 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), 1158 0, 1159 /* 1160 * Move the data to memory. 1161 */ 1162 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1163 offsetof (struct sym_ccb, phys.pm1.sg), 1164 SCR_JUMP, 1165 PADDR_A (pm1_data_end), 1166}/*-------------------------< PM1_DATA_OUT >---------------------*/,{ 1167 /* 1168 * Actual phase is DATA OUT. 1169 * Check against expected direction. 1170 */ 1171 SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), 1172 PADDR_B (data_ovrun), 1173 /* 1174 * Keep track we are moving data from the 1175 * PM1 DATA mini-script. 1176 */ 1177 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), 1178 0, 1179 /* 1180 * Move the data from memory. 1181 */ 1182 SCR_CHMOV_TBL ^ SCR_DATA_OUT, 1183 offsetof (struct sym_ccb, phys.pm1.sg), 1184}/*-------------------------< PM1_DATA_END >---------------------*/,{ 1185 /* 1186 * Clear the flag that told we were moving 1187 * data from the PM1 DATA mini-script. 1188 */ 1189 SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM1)), 1190 0, 1191 /* 1192 * Return to the previous DATA script which 1193 * is guaranteed by design (if no bug) to be 1194 * the main DATA script for this transfer. 1195 */ 1196 SCR_LOAD_REL (temp, 4), 1197 offsetof (struct sym_ccb, phys.pm1.ret), 1198 SCR_RETURN, 1199 0, 1200}/*-------------------------<>-----------------------------------*/ 1201}; 1202 1203static struct SYM_FWB_SCR SYM_FWB_SCR = { 1204/*--------------------------< START64 >--------------------------*/ { 1205 /* 1206 * SCRIPT entry point for the 895A, 896 and 1010. 1207 * For now, there is no specific stuff for those 1208 * chips at this point, but this may come. 1209 */ 1210 SCR_JUMP, 1211 PADDR_A (init), 1212}/*-------------------------< NO_DATA >--------------------------*/,{ 1213 SCR_JUMP, 1214 PADDR_B (data_ovrun), 1215}/*-------------------------< SEL_FOR_ABORT >--------------------*/,{ 1216 /* 1217 * We are jumped here by the C code, if we have 1218 * some target to reset or some disconnected 1219 * job to abort. Since error recovery is a serious 1220 * busyness, we will really reset the SCSI BUS, if 1221 * case of a SCSI interrupt occurring in this path. 1222 */ 1223#ifdef SYM_CONF_TARGET_ROLE_SUPPORT 1224 /* 1225 * Set initiator mode. 1226 */ 1227 SCR_CLR (SCR_TRG), 1228 0, 1229#endif 1230 /* 1231 * And try to select this target. 1232 */ 1233 SCR_SEL_TBL_ATN ^ offsetof (struct sym_hcb, abrt_sel), 1234 PADDR_A (reselect), 1235 /* 1236 * Wait for the selection to complete or 1237 * the selection to time out. 1238 */ 1239 SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1240 -8, 1241 /* 1242 * Call the C code. 1243 */ 1244 SCR_INT, 1245 SIR_TARGET_SELECTED, 1246 /* 1247 * The C code should let us continue here. 1248 * Send the 'kiss of death' message. 1249 * We expect an immediate disconnect once 1250 * the target has eaten the message. 1251 */ 1252 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 1253 0, 1254 SCR_MOVE_TBL ^ SCR_MSG_OUT, 1255 offsetof (struct sym_hcb, abrt_tbl), 1256 SCR_CLR (SCR_ACK|SCR_ATN), 1257 0, 1258 SCR_WAIT_DISC, 1259 0, 1260 /* 1261 * Tell the C code that we are done. 1262 */ 1263 SCR_INT, 1264 SIR_ABORT_SENT, 1265}/*-------------------------< SEL_FOR_ABORT_1 >------------------*/,{ 1266 /* 1267 * Jump at scheduler. 1268 */ 1269 SCR_JUMP, 1270 PADDR_A (start), 1271}/*-------------------------< MSG_IN_ETC >-----------------------*/,{ 1272 /* 1273 * If it is an EXTENDED (variable size message) 1274 * Handle it. 1275 */ 1276 SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)), 1277 PADDR_B (msg_extended), 1278 /* 1279 * Let the C code handle any other 1280 * 1 byte message. 1281 */ 1282 SCR_JUMP ^ IFTRUE (MASK (0x00, 0xf0)), 1283 PADDR_B (msg_received), 1284 SCR_JUMP ^ IFTRUE (MASK (0x10, 0xf0)), 1285 PADDR_B (msg_received), 1286 /* 1287 * We donnot handle 2 bytes messages from SCRIPTS. 1288 * So, let the C code deal with these ones too. 1289 */ 1290 SCR_JUMP ^ IFFALSE (MASK (0x20, 0xf0)), 1291 PADDR_B (msg_weird_seen), 1292 SCR_CLR (SCR_ACK), 1293 0, 1294 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1295 HADDR_1 (msgin[1]), 1296}/*-------------------------< MSG_RECEIVED >---------------------*/,{ 1297 SCR_LOAD_REL (scratcha, 4), /* DUMMY READ */ 1298 0, 1299 SCR_INT, 1300 SIR_MSG_RECEIVED, 1301}/*-------------------------< MSG_WEIRD_SEEN >-------------------*/,{ 1302 SCR_LOAD_REL (scratcha, 4), /* DUMMY READ */ 1303 0, 1304 SCR_INT, 1305 SIR_MSG_WEIRD, 1306}/*-------------------------< MSG_EXTENDED >---------------------*/,{ 1307 /* 1308 * Clear ACK and get the next byte 1309 * assumed to be the message length. 1310 */ 1311 SCR_CLR (SCR_ACK), 1312 0, 1313 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1314 HADDR_1 (msgin[1]), 1315 /* 1316 * Try to catch some unlikely situations as 0 length 1317 * or too large the length. 1318 */ 1319 SCR_JUMP ^ IFTRUE (DATA (0)), 1320 PADDR_B (msg_weird_seen), 1321 SCR_TO_REG (scratcha), 1322 0, 1323 SCR_REG_REG (sfbr, SCR_ADD, (256-8)), 1324 0, 1325 SCR_JUMP ^ IFTRUE (CARRYSET), 1326 PADDR_B (msg_weird_seen), 1327 /* 1328 * We donnot handle extended messages from SCRIPTS. 1329 * Read the amount of data corresponding to the 1330 * message length and call the C code. 1331 */ 1332 SCR_STORE_REL (scratcha, 1), 1333 offsetof (struct sym_dsb, smsg_ext.size), 1334 SCR_CLR (SCR_ACK), 1335 0, 1336 SCR_MOVE_TBL ^ SCR_MSG_IN, 1337 offsetof (struct sym_dsb, smsg_ext), 1338 SCR_JUMP, 1339 PADDR_B (msg_received), 1340}/*-------------------------< MSG_BAD >--------------------------*/,{ 1341 /* 1342 * unimplemented message - reject it. 1343 */ 1344 SCR_INT, 1345 SIR_REJECT_TO_SEND, 1346 SCR_SET (SCR_ATN), 1347 0, 1348 SCR_JUMP, 1349 PADDR_A (clrack), 1350}/*-------------------------< MSG_WEIRD >------------------------*/,{ 1351 /* 1352 * weird message received 1353 * ignore all MSG IN phases and reject it. 1354 */ 1355 SCR_INT, 1356 SIR_REJECT_TO_SEND, 1357 SCR_SET (SCR_ATN), 1358 0, 1359}/*-------------------------< MSG_WEIRD1 >-----------------------*/,{ 1360 SCR_CLR (SCR_ACK), 1361 0, 1362 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 1363 PADDR_A (dispatch), 1364 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1365 HADDR_1 (scratch), 1366 SCR_JUMP, 1367 PADDR_B (msg_weird1), 1368}/*-------------------------< WDTR_RESP >------------------------*/,{ 1369 /* 1370 * let the target fetch our answer. 1371 */ 1372 SCR_SET (SCR_ATN), 1373 0, 1374 SCR_CLR (SCR_ACK), 1375 0, 1376 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1377 PADDR_B (nego_bad_phase), 1378}/*-------------------------< SEND_WDTR >------------------------*/,{ 1379 /* 1380 * Send the M_X_WIDE_REQ 1381 */ 1382 SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, 1383 HADDR_1 (msgout), 1384 SCR_JUMP, 1385 PADDR_B (msg_out_done), 1386}/*-------------------------< SDTR_RESP >------------------------*/,{ 1387 /* 1388 * let the target fetch our answer. 1389 */ 1390 SCR_SET (SCR_ATN), 1391 0, 1392 SCR_CLR (SCR_ACK), 1393 0, 1394 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1395 PADDR_B (nego_bad_phase), 1396}/*-------------------------< SEND_SDTR >------------------------*/,{ 1397 /* 1398 * Send the M_X_SYNC_REQ 1399 */ 1400 SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, 1401 HADDR_1 (msgout), 1402 SCR_JUMP, 1403 PADDR_B (msg_out_done), 1404}/*-------------------------< PPR_RESP >-------------------------*/,{ 1405 /* 1406 * let the target fetch our answer. 1407 */ 1408 SCR_SET (SCR_ATN), 1409 0, 1410 SCR_CLR (SCR_ACK), 1411 0, 1412 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1413 PADDR_B (nego_bad_phase), 1414}/*-------------------------< SEND_PPR >-------------------------*/,{ 1415 /* 1416 * Send the M_X_PPR_REQ 1417 */ 1418 SCR_MOVE_ABS (8) ^ SCR_MSG_OUT, 1419 HADDR_1 (msgout), 1420 SCR_JUMP, 1421 PADDR_B (msg_out_done), 1422}/*-------------------------< NEGO_BAD_PHASE >-------------------*/,{ 1423 SCR_INT, 1424 SIR_NEGO_PROTO, 1425 SCR_JUMP, 1426 PADDR_A (dispatch), 1427}/*-------------------------< MSG_OUT >--------------------------*/,{ 1428 /* 1429 * The target requests a message. 1430 * We donnot send messages that may 1431 * require the device to go to bus free. 1432 */ 1433 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 1434 HADDR_1 (msgout), 1435 /* 1436 * ... wait for the next phase 1437 * if it's a message out, send it again, ... 1438 */ 1439 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 1440 PADDR_B (msg_out), 1441}/*-------------------------< MSG_OUT_DONE >---------------------*/,{ 1442 /* 1443 * Let the C code be aware of the 1444 * sent message and clear the message. 1445 */ 1446 SCR_INT, 1447 SIR_MSG_OUT_DONE, 1448 /* 1449 * ... and process the next phase 1450 */ 1451 SCR_JUMP, 1452 PADDR_A (dispatch), 1453}/*-------------------------< DATA_OVRUN >-----------------------*/,{ 1454 /* 1455 * Use scratcha to count the extra bytes. 1456 */ 1457 SCR_LOAD_ABS (scratcha, 4), 1458 PADDR_B (zero), 1459}/*-------------------------< DATA_OVRUN1 >----------------------*/,{ 1460 /* 1461 * The target may want to transfer too much data. 1462 * 1463 * If phase is DATA OUT write 1 byte and count it. 1464 */ 1465 SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), 1466 16, 1467 SCR_CHMOV_ABS (1) ^ SCR_DATA_OUT, 1468 HADDR_1 (scratch), 1469 SCR_JUMP, 1470 PADDR_B (data_ovrun2), 1471 /* 1472 * If WSR is set, clear this condition, and 1473 * count this byte. 1474 */ 1475 SCR_FROM_REG (scntl2), 1476 0, 1477 SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), 1478 16, 1479 SCR_REG_REG (scntl2, SCR_OR, WSR), 1480 0, 1481 SCR_JUMP, 1482 PADDR_B (data_ovrun2), 1483 /* 1484 * Finally check against DATA IN phase. 1485 * Signal data overrun to the C code 1486 * and jump to dispatcher if not so. 1487 * Read 1 byte otherwise and count it. 1488 */ 1489 SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_IN)), 1490 16, 1491 SCR_INT, 1492 SIR_DATA_OVERRUN, 1493 SCR_JUMP, 1494 PADDR_A (dispatch), 1495 SCR_CHMOV_ABS (1) ^ SCR_DATA_IN, 1496 HADDR_1 (scratch), 1497}/*-------------------------< DATA_OVRUN2 >----------------------*/,{ 1498 /* 1499 * Count this byte. 1500 * This will allow to return a negative 1501 * residual to user. 1502 */ 1503 SCR_REG_REG (scratcha, SCR_ADD, 0x01), 1504 0, 1505 SCR_REG_REG (scratcha1, SCR_ADDC, 0), 1506 0, 1507 SCR_REG_REG (scratcha2, SCR_ADDC, 0), 1508 0, 1509 /* 1510 * .. and repeat as required. 1511 */ 1512 SCR_JUMP, 1513 PADDR_B (data_ovrun1), 1514}/*-------------------------< ABORT_RESEL >----------------------*/,{ 1515 SCR_SET (SCR_ATN), 1516 0, 1517 SCR_CLR (SCR_ACK), 1518 0, 1519 /* 1520 * send the abort/abortag/reset message 1521 * we expect an immediate disconnect 1522 */ 1523 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 1524 0, 1525 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 1526 HADDR_1 (msgout), 1527 SCR_CLR (SCR_ACK|SCR_ATN), 1528 0, 1529 SCR_WAIT_DISC, 1530 0, 1531 SCR_INT, 1532 SIR_RESEL_ABORTED, 1533 SCR_JUMP, 1534 PADDR_A (start), 1535}/*-------------------------< RESEND_IDENT >---------------------*/,{ 1536 /* 1537 * The target stays in MSG OUT phase after having acked 1538 * Identify [+ Tag [+ Extended message ]]. Targets shall 1539 * behave this way on parity error. 1540 * We must send it again all the messages. 1541 */ 1542 SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */ 1543 0, /* 1rst ACK = 90 ns. Hope the chip isn't too fast */ 1544 SCR_JUMP, 1545 PADDR_A (send_ident), 1546}/*-------------------------< IDENT_BREAK >----------------------*/,{ 1547 SCR_CLR (SCR_ATN), 1548 0, 1549 SCR_JUMP, 1550 PADDR_A (select2), 1551}/*-------------------------< IDENT_BREAK_ATN >------------------*/,{ 1552 SCR_SET (SCR_ATN), 1553 0, 1554 SCR_JUMP, 1555 PADDR_A (select2), 1556}/*-------------------------< SDATA_IN >-------------------------*/,{ 1557 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1558 offsetof (struct sym_dsb, sense), 1559 SCR_CALL, 1560 PADDR_A (datai_done), 1561 SCR_JUMP, 1562 PADDR_B (data_ovrun), 1563}/*-------------------------< RESEL_BAD_LUN >--------------------*/,{ 1564 /* 1565 * Message is an IDENTIFY, but lun is unknown. 1566 * Signal problem to C code for logging the event. 1567 * Send a M_ABORT to clear all pending tasks. 1568 */ 1569 SCR_INT, 1570 SIR_RESEL_BAD_LUN, 1571 SCR_JUMP, 1572 PADDR_B (abort_resel), 1573}/*-------------------------< BAD_I_T_L >------------------------*/,{ 1574 /* 1575 * We donnot have a task for that I_T_L. 1576 * Signal problem to C code for logging the event. 1577 * Send a M_ABORT message. 1578 */ 1579 SCR_INT, 1580 SIR_RESEL_BAD_I_T_L, 1581 SCR_JUMP, 1582 PADDR_B (abort_resel), 1583}/*-------------------------< BAD_I_T_L_Q >----------------------*/,{ 1584 /* 1585 * We donnot have a task that matches the tag. 1586 * Signal problem to C code for logging the event. 1587 * Send a M_ABORTTAG message. 1588 */ 1589 SCR_INT, 1590 SIR_RESEL_BAD_I_T_L_Q, 1591 SCR_JUMP, 1592 PADDR_B (abort_resel), 1593}/*-------------------------< BAD_STATUS >-----------------------*/,{ 1594 /* 1595 * Anything different from INTERMEDIATE 1596 * CONDITION MET should be a bad SCSI status, 1597 * given that GOOD status has already been tested. 1598 * Call the C code. 1599 */ 1600 SCR_LOAD_ABS (scratcha, 4), 1601 PADDR_B (startpos), 1602 SCR_INT ^ IFFALSE (DATA (S_COND_MET)), 1603 SIR_BAD_SCSI_STATUS, 1604 SCR_RETURN, 1605 0, 1606}/*-------------------------< PM_HANDLE >------------------------*/,{ 1607 /* 1608 * Phase mismatch handling. 1609 * 1610 * Since we have to deal with 2 SCSI data pointers 1611 * (current and saved), we need at least 2 contexts. 1612 * Each context (pm0 and pm1) has a saved area, a 1613 * SAVE mini-script and a DATA phase mini-script. 1614 */ 1615 /* 1616 * Get the PM handling flags. 1617 */ 1618 SCR_FROM_REG (HF_REG), 1619 0, 1620 /* 1621 * If no flags (1rst PM for example), avoid 1622 * all the below heavy flags testing. 1623 * This makes the normal case a bit faster. 1624 */ 1625 SCR_JUMP ^ IFTRUE (MASK (0, (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED))), 1626 PADDR_B (pm_handle1), 1627 /* 1628 * If we received a SAVE DP, switch to the 1629 * other PM context since the savep may point 1630 * to the current PM context. 1631 */ 1632 SCR_JUMPR ^ IFFALSE (MASK (HF_DP_SAVED, HF_DP_SAVED)), 1633 8, 1634 SCR_REG_REG (sfbr, SCR_XOR, HF_ACT_PM), 1635 0, 1636 /* 1637 * If we have been interrupt in a PM DATA mini-script, 1638 * we take the return address from the corresponding 1639 * saved area. 1640 * This ensure the return address always points to the 1641 * main DATA script for this transfer. 1642 */ 1643 SCR_JUMP ^ IFTRUE (MASK (0, (HF_IN_PM0 | HF_IN_PM1))), 1644 PADDR_B (pm_handle1), 1645 SCR_JUMPR ^ IFFALSE (MASK (HF_IN_PM0, HF_IN_PM0)), 1646 16, 1647 SCR_LOAD_REL (ia, 4), 1648 offsetof(struct sym_ccb, phys.pm0.ret), 1649 SCR_JUMP, 1650 PADDR_B (pm_save), 1651 SCR_LOAD_REL (ia, 4), 1652 offsetof(struct sym_ccb, phys.pm1.ret), 1653 SCR_JUMP, 1654 PADDR_B (pm_save), 1655}/*-------------------------< PM_HANDLE1 >-----------------------*/,{ 1656 /* 1657 * Normal case. 1658 * Update the return address so that it 1659 * will point after the interrupted MOVE. 1660 */ 1661 SCR_REG_REG (ia, SCR_ADD, 8), 1662 0, 1663 SCR_REG_REG (ia1, SCR_ADDC, 0), 1664 0, 1665}/*-------------------------< PM_SAVE >--------------------------*/,{ 1666 /* 1667 * Clear all the flags that told us if we were 1668 * interrupted in a PM DATA mini-script and/or 1669 * we received a SAVE DP. 1670 */ 1671 SCR_SFBR_REG (HF_REG, SCR_AND, (~(HF_IN_PM0|HF_IN_PM1|HF_DP_SAVED))), 1672 0, 1673 /* 1674 * Choose the current PM context. 1675 */ 1676 SCR_JUMP ^ IFTRUE (MASK (HF_ACT_PM, HF_ACT_PM)), 1677 PADDR_B (pm1_save), 1678}/*-------------------------< PM0_SAVE >-------------------------*/,{ 1679 SCR_STORE_REL (ia, 4), 1680 offsetof(struct sym_ccb, phys.pm0.ret), 1681 /* 1682 * If WSR bit is set, either UA and RBC may 1683 * have to be changed whether the device wants 1684 * to ignore this residue or not. 1685 */ 1686 SCR_FROM_REG (scntl2), 1687 0, 1688 SCR_CALL ^ IFTRUE (MASK (WSR, WSR)), 1689 PADDR_B (pm_wsr_handle), 1690 /* 1691 * Save the remaining byte count, the updated 1692 * address and the return address. 1693 */ 1694 SCR_STORE_REL (rbc, 4), 1695 offsetof(struct sym_ccb, phys.pm0.sg.size), 1696 SCR_STORE_REL (ua, 4), 1697 offsetof(struct sym_ccb, phys.pm0.sg.addr), 1698 /* 1699 * Set the current pointer at the PM0 DATA mini-script. 1700 */ 1701 SCR_LOAD_ABS (ia, 4), 1702 PADDR_B (pm0_data_addr), 1703}/*-------------------------< PM_SAVE_END >----------------------*/,{ 1704 SCR_STORE_REL (ia, 4), 1705 offsetof(struct sym_ccb, phys.head.lastp), 1706 SCR_JUMP, 1707 PADDR_A (dispatch), 1708}/*-------------------------< PM1_SAVE >-------------------------*/,{ 1709 SCR_STORE_REL (ia, 4), 1710 offsetof(struct sym_ccb, phys.pm1.ret), 1711 /* 1712 * If WSR bit is set, either UA and RBC may 1713 * have to be changed whether the device wants 1714 * to ignore this residue or not. 1715 */ 1716 SCR_FROM_REG (scntl2), 1717 0, 1718 SCR_CALL ^ IFTRUE (MASK (WSR, WSR)), 1719 PADDR_B (pm_wsr_handle), 1720 /* 1721 * Save the remaining byte count, the updated 1722 * address and the return address. 1723 */ 1724 SCR_STORE_REL (rbc, 4), 1725 offsetof(struct sym_ccb, phys.pm1.sg.size), 1726 SCR_STORE_REL (ua, 4), 1727 offsetof(struct sym_ccb, phys.pm1.sg.addr), 1728 /* 1729 * Set the current pointer at the PM1 DATA mini-script. 1730 */ 1731 SCR_LOAD_ABS (ia, 4), 1732 PADDR_B (pm1_data_addr), 1733 SCR_JUMP, 1734 PADDR_B (pm_save_end), 1735}/*-------------------------< PM_WSR_HANDLE >--------------------*/,{ 1736 /* 1737 * Phase mismatch handling from SCRIPT with WSR set. 1738 * Such a condition can occur if the chip wants to 1739 * execute a CHMOV(size > 1) when the WSR bit is 1740 * set and the target changes PHASE. 1741 * 1742 * We must move the residual byte to memory. 1743 * 1744 * UA contains bit 0..31 of the address to 1745 * move the residual byte. 1746 * Move it to the table indirect. 1747 */ 1748 SCR_STORE_REL (ua, 4), 1749 offsetof (struct sym_ccb, phys.wresid.addr), 1750 /* 1751 * Increment UA (move address to next position). 1752 */ 1753 SCR_REG_REG (ua, SCR_ADD, 1), 1754 0, 1755 SCR_REG_REG (ua1, SCR_ADDC, 0), 1756 0, 1757 SCR_REG_REG (ua2, SCR_ADDC, 0), 1758 0, 1759 SCR_REG_REG (ua3, SCR_ADDC, 0), 1760 0, 1761 /* 1762 * Compute SCRATCHA as: 1763 * - size to transfer = 1 byte. 1764 * - bit 24..31 = high address bit [32...39]. 1765 */ 1766 SCR_LOAD_ABS (scratcha, 4), 1767 PADDR_B (zero), 1768 SCR_REG_REG (scratcha, SCR_OR, 1), 1769 0, 1770 SCR_FROM_REG (rbc3), 1771 0, 1772 SCR_TO_REG (scratcha3), 1773 0, 1774 /* 1775 * Move this value to the table indirect. 1776 */ 1777 SCR_STORE_REL (scratcha, 4), 1778 offsetof (struct sym_ccb, phys.wresid.size), 1779 /* 1780 * Wait for a valid phase. 1781 * While testing with bogus QUANTUM drives, the C1010 1782 * sometimes raised a spurious phase mismatch with 1783 * WSR and the CHMOV(1) triggered another PM. 1784 * Waiting explicitly for the PHASE seemed to avoid 1785 * the nested phase mismatch. Btw, this didn't happen 1786 * using my IBM drives. 1787 */ 1788 SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_IN)), 1789 0, 1790 /* 1791 * Perform the move of the residual byte. 1792 */ 1793 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1794 offsetof (struct sym_ccb, phys.wresid), 1795 /* 1796 * We can now handle the phase mismatch with UA fixed. 1797 * RBC[0..23]=0 is a special case that does not require 1798 * a PM context. The C code also checks against this. 1799 */ 1800 SCR_FROM_REG (rbc), 1801 0, 1802 SCR_RETURN ^ IFFALSE (DATA (0)), 1803 0, 1804 SCR_FROM_REG (rbc1), 1805 0, 1806 SCR_RETURN ^ IFFALSE (DATA (0)), 1807 0, 1808 SCR_FROM_REG (rbc2), 1809 0, 1810 SCR_RETURN ^ IFFALSE (DATA (0)), 1811 0, 1812 /* 1813 * RBC[0..23]=0. 1814 * Not only we donnot need a PM context, but this would 1815 * lead to a bogus CHMOV(0). This condition means that 1816 * the residual was the last byte to move from this CHMOV. 1817 * So, we just have to move the current data script pointer 1818 * (i.e. TEMP) to the SCRIPTS address following the 1819 * interrupted CHMOV and jump to dispatcher. 1820 * IA contains the data pointer to save. 1821 */ 1822 SCR_JUMP, 1823 PADDR_B (pm_save_end), 1824}/*-------------------------< WSR_MA_HELPER >--------------------*/,{ 1825 /* 1826 * Helper for the C code when WSR bit is set. 1827 * Perform the move of the residual byte. 1828 */ 1829 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1830 offsetof (struct sym_ccb, phys.wresid), 1831 SCR_JUMP, 1832 PADDR_A (dispatch), 1833 1834}/*-------------------------< ZERO >-----------------------------*/,{ 1835 SCR_DATA_ZERO, 1836}/*-------------------------< SCRATCH >--------------------------*/,{ 1837 SCR_DATA_ZERO, 1838}/*-------------------------< PM0_DATA_ADDR >--------------------*/,{ 1839 SCR_DATA_ZERO, 1840}/*-------------------------< PM1_DATA_ADDR >--------------------*/,{ 1841 SCR_DATA_ZERO, 1842}/*-------------------------< DONE_POS >-------------------------*/,{ 1843 SCR_DATA_ZERO, 1844}/*-------------------------< STARTPOS >-------------------------*/,{ 1845 SCR_DATA_ZERO, 1846}/*-------------------------< TARGTBL >--------------------------*/,{ 1847 SCR_DATA_ZERO, 1848}/*-------------------------<>-----------------------------------*/ 1849}; 1850 1851static struct SYM_FWZ_SCR SYM_FWZ_SCR = { 1852 /*-------------------------< SNOOPTEST >------------------------*/{ 1853 /* 1854 * Read the variable from memory. 1855 */ 1856 SCR_LOAD_REL (scratcha, 4), 1857 offsetof(struct sym_hcb, scratch), 1858 /* 1859 * Write the variable to memory. 1860 */ 1861 SCR_STORE_REL (temp, 4), 1862 offsetof(struct sym_hcb, scratch), 1863 /* 1864 * Read back the variable from memory. 1865 */ 1866 SCR_LOAD_REL (temp, 4), 1867 offsetof(struct sym_hcb, scratch), 1868}/*-------------------------< SNOOPEND >-------------------------*/,{ 1869 /* 1870 * And stop. 1871 */ 1872 SCR_INT, 1873 99, 1874}/*-------------------------<>-----------------------------------*/ 1875}; 1876