1/* 2 * Based on drivers/serial/8250.c by Russell King. 3 * 4 * Author: Nicolas Pitre 5 * Created: Feb 20, 2003 6 * Copyright: (C) 2003 Monta Vista Software, Inc. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * Note 1: This driver is made separate from the already too overloaded 14 * 8250.c because it needs some kirks of its own and that'll make it 15 * easier to add DMA support. 16 * 17 * Note 2: I'm too sick of device allocation policies for serial ports. 18 * If someone else wants to request an "official" allocation of major/minor 19 * for this driver please be my guest. And don't forget that new hardware 20 * to come from Intel might have more than 3 or 4 of those UARTs. Let's 21 * hope for a better port registration and dynamic device allocation scheme 22 * with the serial core maintainer satisfaction to appear soon. 23 */ 24 25 26#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 27#define SUPPORT_SYSRQ 28#endif 29 30#include <linux/module.h> 31#include <linux/ioport.h> 32#include <linux/init.h> 33#include <linux/console.h> 34#include <linux/sysrq.h> 35#include <linux/serial_reg.h> 36#include <linux/circ_buf.h> 37#include <linux/delay.h> 38#include <linux/interrupt.h> 39#include <linux/of.h> 40#include <linux/platform_device.h> 41#include <linux/tty.h> 42#include <linux/tty_flip.h> 43#include <linux/serial_core.h> 44#include <linux/clk.h> 45#include <linux/io.h> 46#include <linux/slab.h> 47 48#define PXA_NAME_LEN 8 49 50struct uart_pxa_port { 51 struct uart_port port; 52 unsigned char ier; 53 unsigned char lcr; 54 unsigned char mcr; 55 unsigned int lsr_break_flag; 56 struct clk *clk; 57 char name[PXA_NAME_LEN]; 58}; 59 60static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) 61{ 62 offset <<= 2; 63 return readl(up->port.membase + offset); 64} 65 66static inline void serial_out(struct uart_pxa_port *up, int offset, int value) 67{ 68 offset <<= 2; 69 writel(value, up->port.membase + offset); 70} 71 72static void serial_pxa_enable_ms(struct uart_port *port) 73{ 74 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 75 76 up->ier |= UART_IER_MSI; 77 serial_out(up, UART_IER, up->ier); 78} 79 80static void serial_pxa_stop_tx(struct uart_port *port) 81{ 82 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 83 84 if (up->ier & UART_IER_THRI) { 85 up->ier &= ~UART_IER_THRI; 86 serial_out(up, UART_IER, up->ier); 87 } 88} 89 90static void serial_pxa_stop_rx(struct uart_port *port) 91{ 92 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 93 94 up->ier &= ~UART_IER_RLSI; 95 up->port.read_status_mask &= ~UART_LSR_DR; 96 serial_out(up, UART_IER, up->ier); 97} 98 99static inline void receive_chars(struct uart_pxa_port *up, int *status) 100{ 101 unsigned int ch, flag; 102 int max_count = 256; 103 104 do { 105 /* work around Errata #20 according to 106 * Intel(R) PXA27x Processor Family 107 * Specification Update (May 2005) 108 * 109 * Step 2 110 * Disable the Reciever Time Out Interrupt via IER[RTOEI] 111 */ 112 up->ier &= ~UART_IER_RTOIE; 113 serial_out(up, UART_IER, up->ier); 114 115 ch = serial_in(up, UART_RX); 116 flag = TTY_NORMAL; 117 up->port.icount.rx++; 118 119 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | 120 UART_LSR_FE | UART_LSR_OE))) { 121 /* 122 * For statistics only 123 */ 124 if (*status & UART_LSR_BI) { 125 *status &= ~(UART_LSR_FE | UART_LSR_PE); 126 up->port.icount.brk++; 127 /* 128 * We do the SysRQ and SAK checking 129 * here because otherwise the break 130 * may get masked by ignore_status_mask 131 * or read_status_mask. 132 */ 133 if (uart_handle_break(&up->port)) 134 goto ignore_char; 135 } else if (*status & UART_LSR_PE) 136 up->port.icount.parity++; 137 else if (*status & UART_LSR_FE) 138 up->port.icount.frame++; 139 if (*status & UART_LSR_OE) 140 up->port.icount.overrun++; 141 142 /* 143 * Mask off conditions which should be ignored. 144 */ 145 *status &= up->port.read_status_mask; 146 147#ifdef CONFIG_SERIAL_PXA_CONSOLE 148 if (up->port.line == up->port.cons->index) { 149 /* Recover the break flag from console xmit */ 150 *status |= up->lsr_break_flag; 151 up->lsr_break_flag = 0; 152 } 153#endif 154 if (*status & UART_LSR_BI) { 155 flag = TTY_BREAK; 156 } else if (*status & UART_LSR_PE) 157 flag = TTY_PARITY; 158 else if (*status & UART_LSR_FE) 159 flag = TTY_FRAME; 160 } 161 162 if (uart_handle_sysrq_char(&up->port, ch)) 163 goto ignore_char; 164 165 uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); 166 167 ignore_char: 168 *status = serial_in(up, UART_LSR); 169 } while ((*status & UART_LSR_DR) && (max_count-- > 0)); 170 tty_flip_buffer_push(&up->port.state->port); 171 172 /* work around Errata #20 according to 173 * Intel(R) PXA27x Processor Family 174 * Specification Update (May 2005) 175 * 176 * Step 6: 177 * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE] 178 */ 179 up->ier |= UART_IER_RTOIE; 180 serial_out(up, UART_IER, up->ier); 181} 182 183static void transmit_chars(struct uart_pxa_port *up) 184{ 185 struct circ_buf *xmit = &up->port.state->xmit; 186 int count; 187 188 if (up->port.x_char) { 189 serial_out(up, UART_TX, up->port.x_char); 190 up->port.icount.tx++; 191 up->port.x_char = 0; 192 return; 193 } 194 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { 195 serial_pxa_stop_tx(&up->port); 196 return; 197 } 198 199 count = up->port.fifosize / 2; 200 do { 201 serial_out(up, UART_TX, xmit->buf[xmit->tail]); 202 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 203 up->port.icount.tx++; 204 if (uart_circ_empty(xmit)) 205 break; 206 } while (--count > 0); 207 208 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 209 uart_write_wakeup(&up->port); 210 211 212 if (uart_circ_empty(xmit)) 213 serial_pxa_stop_tx(&up->port); 214} 215 216static void serial_pxa_start_tx(struct uart_port *port) 217{ 218 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 219 220 if (!(up->ier & UART_IER_THRI)) { 221 up->ier |= UART_IER_THRI; 222 serial_out(up, UART_IER, up->ier); 223 } 224} 225 226static inline void check_modem_status(struct uart_pxa_port *up) 227{ 228 int status; 229 230 status = serial_in(up, UART_MSR); 231 232 if ((status & UART_MSR_ANY_DELTA) == 0) 233 return; 234 235 if (status & UART_MSR_TERI) 236 up->port.icount.rng++; 237 if (status & UART_MSR_DDSR) 238 up->port.icount.dsr++; 239 if (status & UART_MSR_DDCD) 240 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); 241 if (status & UART_MSR_DCTS) 242 uart_handle_cts_change(&up->port, status & UART_MSR_CTS); 243 244 wake_up_interruptible(&up->port.state->port.delta_msr_wait); 245} 246 247/* 248 * This handles the interrupt from one port. 249 */ 250static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) 251{ 252 struct uart_pxa_port *up = dev_id; 253 unsigned int iir, lsr; 254 255 iir = serial_in(up, UART_IIR); 256 if (iir & UART_IIR_NO_INT) 257 return IRQ_NONE; 258 lsr = serial_in(up, UART_LSR); 259 if (lsr & UART_LSR_DR) 260 receive_chars(up, &lsr); 261 check_modem_status(up); 262 if (lsr & UART_LSR_THRE) 263 transmit_chars(up); 264 return IRQ_HANDLED; 265} 266 267static unsigned int serial_pxa_tx_empty(struct uart_port *port) 268{ 269 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 270 unsigned long flags; 271 unsigned int ret; 272 273 spin_lock_irqsave(&up->port.lock, flags); 274 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; 275 spin_unlock_irqrestore(&up->port.lock, flags); 276 277 return ret; 278} 279 280static unsigned int serial_pxa_get_mctrl(struct uart_port *port) 281{ 282 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 283 unsigned char status; 284 unsigned int ret; 285 286 status = serial_in(up, UART_MSR); 287 288 ret = 0; 289 if (status & UART_MSR_DCD) 290 ret |= TIOCM_CAR; 291 if (status & UART_MSR_RI) 292 ret |= TIOCM_RNG; 293 if (status & UART_MSR_DSR) 294 ret |= TIOCM_DSR; 295 if (status & UART_MSR_CTS) 296 ret |= TIOCM_CTS; 297 return ret; 298} 299 300static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) 301{ 302 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 303 unsigned char mcr = 0; 304 305 if (mctrl & TIOCM_RTS) 306 mcr |= UART_MCR_RTS; 307 if (mctrl & TIOCM_DTR) 308 mcr |= UART_MCR_DTR; 309 if (mctrl & TIOCM_OUT1) 310 mcr |= UART_MCR_OUT1; 311 if (mctrl & TIOCM_OUT2) 312 mcr |= UART_MCR_OUT2; 313 if (mctrl & TIOCM_LOOP) 314 mcr |= UART_MCR_LOOP; 315 316 mcr |= up->mcr; 317 318 serial_out(up, UART_MCR, mcr); 319} 320 321static void serial_pxa_break_ctl(struct uart_port *port, int break_state) 322{ 323 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 324 unsigned long flags; 325 326 spin_lock_irqsave(&up->port.lock, flags); 327 if (break_state == -1) 328 up->lcr |= UART_LCR_SBC; 329 else 330 up->lcr &= ~UART_LCR_SBC; 331 serial_out(up, UART_LCR, up->lcr); 332 spin_unlock_irqrestore(&up->port.lock, flags); 333} 334 335static int serial_pxa_startup(struct uart_port *port) 336{ 337 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 338 unsigned long flags; 339 int retval; 340 341 if (port->line == 3) /* HWUART */ 342 up->mcr |= UART_MCR_AFE; 343 else 344 up->mcr = 0; 345 346 up->port.uartclk = clk_get_rate(up->clk); 347 348 /* 349 * Allocate the IRQ 350 */ 351 retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); 352 if (retval) 353 return retval; 354 355 /* 356 * Clear the FIFO buffers and disable them. 357 * (they will be reenabled in set_termios()) 358 */ 359 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); 360 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | 361 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); 362 serial_out(up, UART_FCR, 0); 363 364 /* 365 * Clear the interrupt registers. 366 */ 367 (void) serial_in(up, UART_LSR); 368 (void) serial_in(up, UART_RX); 369 (void) serial_in(up, UART_IIR); 370 (void) serial_in(up, UART_MSR); 371 372 /* 373 * Now, initialize the UART 374 */ 375 serial_out(up, UART_LCR, UART_LCR_WLEN8); 376 377 spin_lock_irqsave(&up->port.lock, flags); 378 up->port.mctrl |= TIOCM_OUT2; 379 serial_pxa_set_mctrl(&up->port, up->port.mctrl); 380 spin_unlock_irqrestore(&up->port.lock, flags); 381 382 /* 383 * Finally, enable interrupts. Note: Modem status interrupts 384 * are set via set_termios(), which will be occurring imminently 385 * anyway, so we don't enable them here. 386 */ 387 up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; 388 serial_out(up, UART_IER, up->ier); 389 390 /* 391 * And clear the interrupt registers again for luck. 392 */ 393 (void) serial_in(up, UART_LSR); 394 (void) serial_in(up, UART_RX); 395 (void) serial_in(up, UART_IIR); 396 (void) serial_in(up, UART_MSR); 397 398 return 0; 399} 400 401static void serial_pxa_shutdown(struct uart_port *port) 402{ 403 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 404 unsigned long flags; 405 406 free_irq(up->port.irq, up); 407 408 /* 409 * Disable interrupts from this port 410 */ 411 up->ier = 0; 412 serial_out(up, UART_IER, 0); 413 414 spin_lock_irqsave(&up->port.lock, flags); 415 up->port.mctrl &= ~TIOCM_OUT2; 416 serial_pxa_set_mctrl(&up->port, up->port.mctrl); 417 spin_unlock_irqrestore(&up->port.lock, flags); 418 419 /* 420 * Disable break condition and FIFOs 421 */ 422 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); 423 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | 424 UART_FCR_CLEAR_RCVR | 425 UART_FCR_CLEAR_XMIT); 426 serial_out(up, UART_FCR, 0); 427} 428 429static void 430serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, 431 struct ktermios *old) 432{ 433 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 434 unsigned char cval, fcr = 0; 435 unsigned long flags; 436 unsigned int baud, quot; 437 unsigned int dll; 438 439 switch (termios->c_cflag & CSIZE) { 440 case CS5: 441 cval = UART_LCR_WLEN5; 442 break; 443 case CS6: 444 cval = UART_LCR_WLEN6; 445 break; 446 case CS7: 447 cval = UART_LCR_WLEN7; 448 break; 449 default: 450 case CS8: 451 cval = UART_LCR_WLEN8; 452 break; 453 } 454 455 if (termios->c_cflag & CSTOPB) 456 cval |= UART_LCR_STOP; 457 if (termios->c_cflag & PARENB) 458 cval |= UART_LCR_PARITY; 459 if (!(termios->c_cflag & PARODD)) 460 cval |= UART_LCR_EPAR; 461 462 /* 463 * Ask the core to calculate the divisor for us. 464 */ 465 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 466 quot = uart_get_divisor(port, baud); 467 468 if ((up->port.uartclk / quot) < (2400 * 16)) 469 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; 470 else if ((up->port.uartclk / quot) < (230400 * 16)) 471 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; 472 else 473 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; 474 475 /* 476 * Ok, we're now changing the port state. Do it with 477 * interrupts disabled. 478 */ 479 spin_lock_irqsave(&up->port.lock, flags); 480 481 /* 482 * Ensure the port will be enabled. 483 * This is required especially for serial console. 484 */ 485 up->ier |= UART_IER_UUE; 486 487 /* 488 * Update the per-port timeout. 489 */ 490 uart_update_timeout(port, termios->c_cflag, baud); 491 492 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; 493 if (termios->c_iflag & INPCK) 494 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; 495 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 496 up->port.read_status_mask |= UART_LSR_BI; 497 498 /* 499 * Characters to ignore 500 */ 501 up->port.ignore_status_mask = 0; 502 if (termios->c_iflag & IGNPAR) 503 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; 504 if (termios->c_iflag & IGNBRK) { 505 up->port.ignore_status_mask |= UART_LSR_BI; 506 /* 507 * If we're ignoring parity and break indicators, 508 * ignore overruns too (for real raw support). 509 */ 510 if (termios->c_iflag & IGNPAR) 511 up->port.ignore_status_mask |= UART_LSR_OE; 512 } 513 514 /* 515 * ignore all characters if CREAD is not set 516 */ 517 if ((termios->c_cflag & CREAD) == 0) 518 up->port.ignore_status_mask |= UART_LSR_DR; 519 520 /* 521 * CTS flow control flag and modem status interrupts 522 */ 523 up->ier &= ~UART_IER_MSI; 524 if (UART_ENABLE_MS(&up->port, termios->c_cflag)) 525 up->ier |= UART_IER_MSI; 526 527 serial_out(up, UART_IER, up->ier); 528 529 if (termios->c_cflag & CRTSCTS) 530 up->mcr |= UART_MCR_AFE; 531 else 532 up->mcr &= ~UART_MCR_AFE; 533 534 serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ 535 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ 536 537 /* 538 * work around Errata #75 according to Intel(R) PXA27x Processor Family 539 * Specification Update (Nov 2005) 540 */ 541 dll = serial_in(up, UART_DLL); 542 WARN_ON(dll != (quot & 0xff)); 543 544 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ 545 serial_out(up, UART_LCR, cval); /* reset DLAB */ 546 up->lcr = cval; /* Save LCR */ 547 serial_pxa_set_mctrl(&up->port, up->port.mctrl); 548 serial_out(up, UART_FCR, fcr); 549 spin_unlock_irqrestore(&up->port.lock, flags); 550} 551 552static void 553serial_pxa_pm(struct uart_port *port, unsigned int state, 554 unsigned int oldstate) 555{ 556 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 557 558 if (!state) 559 clk_prepare_enable(up->clk); 560 else 561 clk_disable_unprepare(up->clk); 562} 563 564static void serial_pxa_release_port(struct uart_port *port) 565{ 566} 567 568static int serial_pxa_request_port(struct uart_port *port) 569{ 570 return 0; 571} 572 573static void serial_pxa_config_port(struct uart_port *port, int flags) 574{ 575 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 576 up->port.type = PORT_PXA; 577} 578 579static int 580serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) 581{ 582 /* we don't want the core code to modify any port params */ 583 return -EINVAL; 584} 585 586static const char * 587serial_pxa_type(struct uart_port *port) 588{ 589 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 590 return up->name; 591} 592 593static struct uart_pxa_port *serial_pxa_ports[4]; 594static struct uart_driver serial_pxa_reg; 595 596#ifdef CONFIG_SERIAL_PXA_CONSOLE 597 598#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) 599 600/* 601 * Wait for transmitter & holding register to empty 602 */ 603static inline void wait_for_xmitr(struct uart_pxa_port *up) 604{ 605 unsigned int status, tmout = 10000; 606 607 /* Wait up to 10ms for the character(s) to be sent. */ 608 do { 609 status = serial_in(up, UART_LSR); 610 611 if (status & UART_LSR_BI) 612 up->lsr_break_flag = UART_LSR_BI; 613 614 if (--tmout == 0) 615 break; 616 udelay(1); 617 } while ((status & BOTH_EMPTY) != BOTH_EMPTY); 618 619 /* Wait up to 1s for flow control if necessary */ 620 if (up->port.flags & UPF_CONS_FLOW) { 621 tmout = 1000000; 622 while (--tmout && 623 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) 624 udelay(1); 625 } 626} 627 628static void serial_pxa_console_putchar(struct uart_port *port, int ch) 629{ 630 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 631 632 wait_for_xmitr(up); 633 serial_out(up, UART_TX, ch); 634} 635 636/* 637 * Print a string to the serial port trying not to disturb 638 * any possible real use of the port... 639 * 640 * The console_lock must be held when we get here. 641 */ 642static void 643serial_pxa_console_write(struct console *co, const char *s, unsigned int count) 644{ 645 struct uart_pxa_port *up = serial_pxa_ports[co->index]; 646 unsigned int ier; 647 unsigned long flags; 648 int locked = 1; 649 650 clk_enable(up->clk); 651 local_irq_save(flags); 652 if (up->port.sysrq) 653 locked = 0; 654 else if (oops_in_progress) 655 locked = spin_trylock(&up->port.lock); 656 else 657 spin_lock(&up->port.lock); 658 659 /* 660 * First save the IER then disable the interrupts 661 */ 662 ier = serial_in(up, UART_IER); 663 serial_out(up, UART_IER, UART_IER_UUE); 664 665 uart_console_write(&up->port, s, count, serial_pxa_console_putchar); 666 667 /* 668 * Finally, wait for transmitter to become empty 669 * and restore the IER 670 */ 671 wait_for_xmitr(up); 672 serial_out(up, UART_IER, ier); 673 674 if (locked) 675 spin_unlock(&up->port.lock); 676 local_irq_restore(flags); 677 clk_disable(up->clk); 678 679} 680 681#ifdef CONFIG_CONSOLE_POLL 682/* 683 * Console polling routines for writing and reading from the uart while 684 * in an interrupt or debug context. 685 */ 686 687static int serial_pxa_get_poll_char(struct uart_port *port) 688{ 689 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 690 unsigned char lsr = serial_in(up, UART_LSR); 691 692 while (!(lsr & UART_LSR_DR)) 693 lsr = serial_in(up, UART_LSR); 694 695 return serial_in(up, UART_RX); 696} 697 698 699static void serial_pxa_put_poll_char(struct uart_port *port, 700 unsigned char c) 701{ 702 unsigned int ier; 703 struct uart_pxa_port *up = (struct uart_pxa_port *)port; 704 705 /* 706 * First save the IER then disable the interrupts 707 */ 708 ier = serial_in(up, UART_IER); 709 serial_out(up, UART_IER, UART_IER_UUE); 710 711 wait_for_xmitr(up); 712 /* 713 * Send the character out. 714 */ 715 serial_out(up, UART_TX, c); 716 717 /* 718 * Finally, wait for transmitter to become empty 719 * and restore the IER 720 */ 721 wait_for_xmitr(up); 722 serial_out(up, UART_IER, ier); 723} 724 725#endif /* CONFIG_CONSOLE_POLL */ 726 727static int __init 728serial_pxa_console_setup(struct console *co, char *options) 729{ 730 struct uart_pxa_port *up; 731 int baud = 9600; 732 int bits = 8; 733 int parity = 'n'; 734 int flow = 'n'; 735 736 if (co->index == -1 || co->index >= serial_pxa_reg.nr) 737 co->index = 0; 738 up = serial_pxa_ports[co->index]; 739 if (!up) 740 return -ENODEV; 741 742 if (options) 743 uart_parse_options(options, &baud, &parity, &bits, &flow); 744 745 return uart_set_options(&up->port, co, baud, parity, bits, flow); 746} 747 748static struct console serial_pxa_console = { 749 .name = "ttyS", 750 .write = serial_pxa_console_write, 751 .device = uart_console_device, 752 .setup = serial_pxa_console_setup, 753 .flags = CON_PRINTBUFFER, 754 .index = -1, 755 .data = &serial_pxa_reg, 756}; 757 758#define PXA_CONSOLE &serial_pxa_console 759#else 760#define PXA_CONSOLE NULL 761#endif 762 763static struct uart_ops serial_pxa_pops = { 764 .tx_empty = serial_pxa_tx_empty, 765 .set_mctrl = serial_pxa_set_mctrl, 766 .get_mctrl = serial_pxa_get_mctrl, 767 .stop_tx = serial_pxa_stop_tx, 768 .start_tx = serial_pxa_start_tx, 769 .stop_rx = serial_pxa_stop_rx, 770 .enable_ms = serial_pxa_enable_ms, 771 .break_ctl = serial_pxa_break_ctl, 772 .startup = serial_pxa_startup, 773 .shutdown = serial_pxa_shutdown, 774 .set_termios = serial_pxa_set_termios, 775 .pm = serial_pxa_pm, 776 .type = serial_pxa_type, 777 .release_port = serial_pxa_release_port, 778 .request_port = serial_pxa_request_port, 779 .config_port = serial_pxa_config_port, 780 .verify_port = serial_pxa_verify_port, 781#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_PXA_CONSOLE) 782 .poll_get_char = serial_pxa_get_poll_char, 783 .poll_put_char = serial_pxa_put_poll_char, 784#endif 785}; 786 787static struct uart_driver serial_pxa_reg = { 788 .owner = THIS_MODULE, 789 .driver_name = "PXA serial", 790 .dev_name = "ttyS", 791 .major = TTY_MAJOR, 792 .minor = 64, 793 .nr = 4, 794 .cons = PXA_CONSOLE, 795}; 796 797#ifdef CONFIG_PM 798static int serial_pxa_suspend(struct device *dev) 799{ 800 struct uart_pxa_port *sport = dev_get_drvdata(dev); 801 802 if (sport) 803 uart_suspend_port(&serial_pxa_reg, &sport->port); 804 805 return 0; 806} 807 808static int serial_pxa_resume(struct device *dev) 809{ 810 struct uart_pxa_port *sport = dev_get_drvdata(dev); 811 812 if (sport) 813 uart_resume_port(&serial_pxa_reg, &sport->port); 814 815 return 0; 816} 817 818static const struct dev_pm_ops serial_pxa_pm_ops = { 819 .suspend = serial_pxa_suspend, 820 .resume = serial_pxa_resume, 821}; 822#endif 823 824static struct of_device_id serial_pxa_dt_ids[] = { 825 { .compatible = "mrvl,pxa-uart", }, 826 { .compatible = "mrvl,mmp-uart", }, 827 {} 828}; 829MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); 830 831static int serial_pxa_probe_dt(struct platform_device *pdev, 832 struct uart_pxa_port *sport) 833{ 834 struct device_node *np = pdev->dev.of_node; 835 int ret; 836 837 if (!np) 838 return 1; 839 840 ret = of_alias_get_id(np, "serial"); 841 if (ret < 0) { 842 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); 843 return ret; 844 } 845 sport->port.line = ret; 846 return 0; 847} 848 849static int serial_pxa_probe(struct platform_device *dev) 850{ 851 struct uart_pxa_port *sport; 852 struct resource *mmres, *irqres; 853 int ret; 854 855 mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); 856 irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); 857 if (!mmres || !irqres) 858 return -ENODEV; 859 860 sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); 861 if (!sport) 862 return -ENOMEM; 863 864 sport->clk = clk_get(&dev->dev, NULL); 865 if (IS_ERR(sport->clk)) { 866 ret = PTR_ERR(sport->clk); 867 goto err_free; 868 } 869 870 ret = clk_prepare(sport->clk); 871 if (ret) { 872 clk_put(sport->clk); 873 goto err_free; 874 } 875 876 sport->port.type = PORT_PXA; 877 sport->port.iotype = UPIO_MEM; 878 sport->port.mapbase = mmres->start; 879 sport->port.irq = irqres->start; 880 sport->port.fifosize = 64; 881 sport->port.ops = &serial_pxa_pops; 882 sport->port.dev = &dev->dev; 883 sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; 884 sport->port.uartclk = clk_get_rate(sport->clk); 885 886 ret = serial_pxa_probe_dt(dev, sport); 887 if (ret > 0) 888 sport->port.line = dev->id; 889 else if (ret < 0) 890 goto err_clk; 891 snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1); 892 893 sport->port.membase = ioremap(mmres->start, resource_size(mmres)); 894 if (!sport->port.membase) { 895 ret = -ENOMEM; 896 goto err_clk; 897 } 898 899 serial_pxa_ports[sport->port.line] = sport; 900 901 uart_add_one_port(&serial_pxa_reg, &sport->port); 902 platform_set_drvdata(dev, sport); 903 904 return 0; 905 906 err_clk: 907 clk_unprepare(sport->clk); 908 clk_put(sport->clk); 909 err_free: 910 kfree(sport); 911 return ret; 912} 913 914static int serial_pxa_remove(struct platform_device *dev) 915{ 916 struct uart_pxa_port *sport = platform_get_drvdata(dev); 917 918 uart_remove_one_port(&serial_pxa_reg, &sport->port); 919 920 clk_unprepare(sport->clk); 921 clk_put(sport->clk); 922 kfree(sport); 923 924 return 0; 925} 926 927static struct platform_driver serial_pxa_driver = { 928 .probe = serial_pxa_probe, 929 .remove = serial_pxa_remove, 930 931 .driver = { 932 .name = "pxa2xx-uart", 933 .owner = THIS_MODULE, 934#ifdef CONFIG_PM 935 .pm = &serial_pxa_pm_ops, 936#endif 937 .of_match_table = serial_pxa_dt_ids, 938 }, 939}; 940 941static int __init serial_pxa_init(void) 942{ 943 int ret; 944 945 ret = uart_register_driver(&serial_pxa_reg); 946 if (ret != 0) 947 return ret; 948 949 ret = platform_driver_register(&serial_pxa_driver); 950 if (ret != 0) 951 uart_unregister_driver(&serial_pxa_reg); 952 953 return ret; 954} 955 956static void __exit serial_pxa_exit(void) 957{ 958 platform_driver_unregister(&serial_pxa_driver); 959 uart_unregister_driver(&serial_pxa_reg); 960} 961 962module_init(serial_pxa_init); 963module_exit(serial_pxa_exit); 964 965MODULE_LICENSE("GPL"); 966MODULE_ALIAS("platform:pxa2xx-uart"); 967