| 179c4fdb565dd2157e5dfe89318b74868e3b523d |
|
04-Jan-2012 |
Frans Meulenbroeks <fransmeulenbroeks@gmail.com> |
hwmon: replaced strict_str* with kstr*
replaced strict_strtol with kstrtol and
replaced strict_strtuol with kstrtuol
This satisfies checkpatch -f
Compile tested only: no warnings or errors given
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
/drivers/hwmon/emc1403.c
|
| bcf721d14d881da86a8defa96bdc9492abe191ae |
|
09-Feb-2011 |
Guenter Roeck <guenter.roeck@ericsson.com> |
hwmon: (emc1403) Fix I2C address range
I2C address range included 0x2a, which the chips do not support.
Replace with 0x29 which is supported but was missing.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
/drivers/hwmon/emc1403.c
|
| 7a1b76f2a46016809c7bcacf81e89948cc306703 |
|
12-Jan-2011 |
Jekyll Lai <jekyll_lai@wistron.com> |
hwmon: (emc1403) Add EMC1423 support
EMC1423 uses the similar register and adds a hardware shutdown pin to
protect exceed temperature. This function is set by resistor; it's not
necessary to do anything in the driver except add the emc1423 pid of 0x23.
Signed-off-by: Jekyll Lai <jekyll_lai@wistron.com>
[Updated Kconfig/comments and minor further changes asked for by the hwmon
maintainers]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[Fixed checkpatch warning]
Signed-of--by: Jean Delvare <khali@linux-fr.org>
/drivers/hwmon/emc1403.c
|
| f17c811d1433aa1966f9c5a744841427e9a97ecf |
|
17-Sep-2010 |
Yong Wang <yong.y.wang@linux.intel.com> |
hwmon: (emc1403) Remove unnecessary hwmon_device_unregister
It is unnecessary and wrong to call hwmon_device_unregister in error
handling before hwmon_device_register is called.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/hwmon/emc1403.c
|
| 960f12f4d1eb5ba3c76dc6b57a909a65dd59e1c2 |
|
14-Aug-2010 |
Alan Cox <alan@linux.intel.com> |
hwmon: (emc1403) Add power support
Add back the power interface we lost due to a slight misunderstanding of
the maintainers wishes.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/hwmon/emc1403.c
|
| dac6831e67e90d1cee430a66e7390e753c20d835 |
|
27-May-2010 |
Kalhan Trisal <kalhan.trisal@intel.com> |
hwmon: EMC1403 thermal sensor support
Provides support for the EMC1403 thermal sensor. Only reporting of values
is supported. The various Moorestown specific extras to do with thermal
alerts and the like are not in this version of the driver.
Considerably edited and tidied up by Alan Cox, plus fixes and detection
bits from Jean Delvare.
Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/hwmon/emc1403.c
|