| d1659fcc59b21ec442564fedb67a5ad371f82380 |
|
20-May-2008 |
Adrian Bunk <bunk@kernel.org> |
Input: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 3b04a61107dfe46dbfc1796298b59ca3c0a09cd9 |
|
27-Nov-2007 |
Julia Lawall <julia@diku.dk> |
Input: drop redundant includes of moduleparam.h
Drop #include <linux/moduleparam.h> in files that also include
linux/module.h, since module.h includes moduleparam.h already.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 2a0f9c4c452298da89b67060c7ca034ef7836aa9 |
|
02-Nov-2007 |
Helge Deller <deller@gmx.de> |
Input: inport, logibm - use KERN_INFO when reporting missing mouse
Many mouse drivers are often compiled (e.g. in Linux distributions) into the
kernel at the same time just to make sure that at least one driver will suceed
in find it's mouse device. Nevertheless, only the inport and logitech busmouse
mouse drivers report with KERN_ERR log level if the mouse wasn't found. They
should use KERN_INFO instead, because it's not an error if the mouse isn't
attached at all.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 7b19ada2ed3c1eccb9fe94d74b05e1428224663d |
|
19-Oct-2007 |
Jiri Slaby <jirislaby@gmail.com> |
get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines
use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/input/mouse/logibm.c
|
| 62b529a7b9c11880a8820494a25db0e2ecdf3bed |
|
18-Feb-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: remove obsolete setup parameters from input drivers
They have been marked as __obsolete_setup() for several years,
it is time for them to go.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 721556150e397f606a3f029736d77a27503f94e2 |
|
06-Nov-2006 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: mice - handle errors when registering input devices
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 7d12e780e003f93433d49ce78cfedf4b4c52adc5 |
|
05-Oct-2006 |
David Howells <dhowells@redhat.com> |
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
/drivers/input/mouse/logibm.c
|
| 2e5b636bb5f8dacbb91d08544e2c41ebcad5dace |
|
15-Sep-2005 |
Dmitry Torokhov <dtor_core@ameritech.net> |
[PATCH] drivers/input/mouse: convert to dynamic input_dev allocation
Input: convert drivers/input/mouse to dynamic input_dev allocation
This is required for input_dev sysfs integration
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/input/mouse/logibm.c
|
| 3108d42de4da0823feb37a55db62acdc01554625 |
|
29-May-2005 |
Dmitry Torokhov <dtor_core@ameritech.net> |
Input: remove user counters from drivers/input/mouse since input
core takes care of calling open and close methods only
when needed.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 968ac842c4946abcd6ae623414783548672177f5 |
|
29-May-2005 |
Dmitry Torokhov <dtor_core@ameritech.net> |
Input: whitespace fixes in drivers/input/mouse
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/mouse/logibm.c
|
| 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
/drivers/input/mouse/logibm.c
|