| 63a9332b232bdab0df6ef18a9f39e8d58a82bda4 |
|
07-Dec-2011 |
Andrew Lunn <andrew@lunn.ch> |
ARM: Orion: Get address map from plat-orion instead of via platform_data
Use an getter function in plat-orion/addr-map.c to get the address map
structure, rather than pass it to drivers in the platform_data
structures. When the drivers are built for none orion platforms, a
dummy function is provided instead which returns NULL.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
/drivers/usb/host/ehci-orion.c
|
| b5dd18d8747010e3f3eb1cc76a49f94291938559 |
|
07-Sep-2011 |
Yong Zhang <yong.zhang0@gmail.com> |
USB: irq: Remove IRQF_DISABLED
This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| c430131a02d677aa708f56342c1565edfdacb3c0 |
|
03-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: EHCI: Support controllers with big endian capability regs
The two first HC capability registers (CAPLENGTH and HCIVERSION)
are defined as one 8-bit and one 16-bit register. Most HC
implementations have selected to treat these registers as part
of a 32-bit register, giving the same layout for both big and
small endian systems.
This patch adds a new quirk, big_endian_capbase, to support
controllers with big endian register interfaces that treat
HCIVERSION and CAPLENGTH as individual registers.
Signed-off-by: Jan Andersson <jan@gaisler.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| bcf40815e0cda371cecc242398fe39b873bb1047 |
|
15-Feb-2011 |
Matthieu CASTET <matthieu.castet@parrot.com> |
USB: don't run ehci_reset in ehci_run for tdi device
TDI driver does the ehci_reset in their reset callback.
Don't reset in ehci_run because configuration settings done in
platform driver will be reset.
This will allow to make msm use ehci_run.
Signed-off-by: Matthieu CASTET <castet.matthieu@parrot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| 5672b7e6a99a91838c1b595a80d43006bcd9a178 |
|
15-Dec-2009 |
H Hartley Sweeten <hartleys@visionengravers.com> |
USB: ehci-orion.c: use resource_size()
Use resource_size().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| bcfa4e68d8d0ea617bde4203b2b3848f5a49a423 |
|
13-Jul-2009 |
Simon Kagstrom <simon.kagstrom@netinsight.net> |
USB: ehci-orion: Call ehci_reset before ehci_halt
I noticed that USB initialization didn't setup correctly on my kirkwood
based board (OpenRD base) if I hadn't initialized USB in U-boot first.
The error message looks like this:
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: can't setup
orion-ehci orion-ehci.0: USB bus 1 deregistered
orion-ehci orion-ehci.0: init orion-ehci.0 fail, -110
orion-ehci: probe of orion-ehci.0 failed with error -110
which is caused by ehci_halt() timing out in the handshake() call. I
noticed that U-boot does a reset before calling handshake(), so this
patch does the same thing for Linux. USB now works for me.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| 914b701280a76f96890ad63eb0fa99bf204b961c |
|
29-Jun-2009 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI: use the new clear_tt_buffer interface
This patch (as1256) changes ehci-hcd and all the other drivers in the
EHCI family to make use of the new clear_tt_buffer callbacks. When a
Clear-TT-Buffer request is in progress for a QH, the QH is not allowed
to be linked into the async schedule until the request is finished.
At that time, if there are any URBs queued for the QH, it is linked
into the async schedule.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| b18ffd49e86102a9ed0a1cc83fdafe3891e844e5 |
|
28-May-2009 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI: update toggle state for linked QHs
This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued
for an endpoint whose QH is already in the LINKED state, the QH
doesn't get refreshed. As a result, if usb_clear_halt() was called
during the time that the QH was linked but idle, the data toggle value
in the QH doesn't get reset.
The symptom is that after a clear_halt, data gets lost and transfers
time out. This problem is starting to show up now because the
"ehci-hcd unlink speedups" patch causes QHs with no queued URBs to
remain linked for a suitable time.
The patch utilizes the new endpoint_reset mechanism to fix the
problem. When an endpoint is reset, the new method forcibly unlinks
the QH (if necessary) and safely updates the toggle value. This
allows qh_update() to be simplified and avoids using usb_device's
toggle bits in a rather unintuitive way.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Tested-by: David <david@unsolicited.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| dc2f2b7505c195a6963fc07b549e269eee417261 |
|
28-Mar-2009 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
USB: move orion-ehci's probe function to .devinit.text
A pointer to ehci_orion_drv_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Ronen Shitrit <rshitrit@marvell.com>
Cc: Lennert Buytenhek <buytenh@marvell.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Nicolas Pitre <nico@marvell.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tzachi Perelstein <tzachi@marvell.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| fb6f552930e52699c8ac452c5a79ec3e97e6fc73 |
|
17-Sep-2008 |
Ronen Shitrit <rshitrit@marvell.com> |
[ARM] Orion: add the option to support different ehci phy initialization
The Orion ehci driver serves the Orion, kirkwood and DD Soc families.
Since each of those integrate a different USB phy we should have the
ability to use few initialization sequences or to leave the boot loader
phy settings as is.
Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
/drivers/usb/host/ehci-orion.c
|
| 6f088f1d215be5250582b974f83f0e3aa6ad3a28 |
|
09-Aug-2008 |
Lennert Buytenhek <buytenh@wantstofly.org> |
[ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/plat
This patch performs the equivalent include directory shuffle for
plat-orion, and fixes up all users.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
/drivers/usb/host/ehci-orion.c
|
| 7071a3ce0ca058ad2a9e3e8c33f30fb0bce62005 |
|
02-May-2008 |
Kay Sievers <kay.sievers@vrfy.org> |
USB: usb dev_name() instead of dev->bus_id
The bus_id field is going away, use the dev_name() function instead.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| 3a31155cfff0935e4b178f3dca733d2d60d2eb8d |
|
20-May-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI: suppress unwanted error messages
This patch (as1096) fixes an annoying problem: When a full-speed or
low-speed device is plugged into an EHCI controller, it fails to
enumerate at high speed and then is handed over to the companion
controller. But usbcore logs a misleading and unwanted error message
when the high-speed enumeration fails.
The patch adds a new HCD method, port_handed_over, which asks whether
a port has been handed over to a companion controller. If it has, the
error message is suppressed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| a8e5177583e975fc1f7c621c93956f494df9b979 |
|
20-May-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI: fix up root-hub TT mess
This patch (as1095) cleans up the HCD glue and several of the EHCI
bus-glue files. The ehci->is_tdi_rh_tt flag is redundant, since it
means the same thing as the hcd->has_tt flag, so it is removed and the
other flag used in its place.
Some of the bus-glue files didn't get the relinquish_port method added
to their hc_driver structures. Although that routine currently
doesn't do anything for controllers with an integrated TT, in the
future it might. So the patch adds it where it is missing.
Lastly, some of the bus-glue files have erroneous entries for their
hc_driver's suspend and resume methods. These method pointers are
specific to PCI and shouldn't be used otherwise.
(The patch also includes an invisible whitespace fix.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
/drivers/usb/host/ehci-orion.c
|
| 129bd474a80726247e5b1c61fe66a413e63053bc |
|
20-May-2008 |
Lennert Buytenhek <buytenh@wantstofly.org> |
USB: ehci-orion: the Orion EHCI root hub does have a Transaction Translator
Commit 7329e211b987a493cbcfca0e98c60eb108ab42df ("USB: root hubs don't
lie about their number of TTs") requires the various platform EHCI
glue modules to set ->has_tt if the root hub has a Transaction
Translator.
The Orion EHCI root hub does have a Transaction Translator, so set
->has_tt in ehci_orion_setup(). This fixes oopsing on plugging in a
low speed device.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Nicolas Pitre <nico@marvell.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|
| 705a752162768fed3e2c26fba5bffdd3a3bd04f2 |
|
27-Mar-2008 |
Lennert Buytenhek <buytenh@wantstofly.org> |
plat-orion: make ehci-orion available for all Orion families
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
/drivers/usb/host/ehci-orion.c
|
| 92aecfa95523384923b52c8ddaf948fc02a53e82 |
|
27-Mar-2008 |
Lennert Buytenhek <buytenh@wantstofly.org> |
ehci-orion: mbus decode window support
Make it possible to pass mbus_dram_target_info to the ehci-orion
driver via the platform data, make the ehci-orion driver program
the window registers based on this data if it is passed in, and
make the Orion platform setup code use this method instead of
programming the EHCI mbus window registers by hand.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
/drivers/usb/host/ehci-orion.c
|
| e96ffe2f9debd5fdc53144259d9e5faa514736b9 |
|
01-Dec-2007 |
Tzachi Perelstein <tzachi@marvell.com> |
USB: add Marvell Orion USB host support
Some glue bits for the on-chip USB host controller in the Marvell Orion
family of ARM SoCs, which is basically EHCI compatible.
Signed-off-by: Tzachi Perelstein <tzachi@marvell.com>
Reviewed-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/usb/host/ehci-orion.c
|