| 51be08419dc86c72486ac556aa39bc01026a403d |
|
15-Jan-2012 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits)
module_param: make bool parameters really bool (drivers/video/i810)
Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual."
OMAPDSS: HDMI: Disable DDC internal pull up
OMAPDSS: HDMI: Move duplicate code from boardfile
OMAPDSS: add OrtusTech COM43H4M10XTC display support
OMAP: DSS2: Support for UMSH-8173MD TFT panel
ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
OMAPDSS: HDMI: Create function to enable HDMI audio
ASoC: OMAP: HDMI: Correct signature of ASoC functions
ASoC: OMAP: HDMI: Introduce driver data for audio codec
grvga: fix section mismatch warnings
video: s3c-fb: Don't keep device runtime active when open
video: s3c-fb: Hold runtime PM references when touching registers
video: s3c-fb: Take a runtime PM reference when unblanked
video: s3c-fb: Disable runtime PM in error paths from probe
video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer
video: s3c-fb: Make runtime PM functional again
drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory()
drivers/video: fsl-diu-fb: add default platform ops functions
drivers/video: fsl-diu-fb: remove broken reference count enabling the display
...
|
| 90ab5ee94171b3e28de6bb42ee30b527014e0be7 |
|
13-Jan-2012 |
Rusty Russell <rusty@rustcorp.com.au> |
module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
/drivers/video/omap2/dss/core.c
|
| 58f2554807a7dc627f1583d1d4363b85758cf685 |
|
04-Nov-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAPDSS: create apply.c
Create a new file, apply.c, and move code about handling the
apply-mechanism and configuration of the managers and overlays from
manager.c to apply.c.
Not all related code is moved in this patch, but only the core
apply/configure functions. The later patches move rest of the code from
overlay.c and manager.c, adding necessary locking at the same time.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 162874d5f5fa8aac7ff406825f152abb22d3c6c2 |
|
22-Sep-2011 |
Mythri P K <mythripk@ti.com> |
OMAPDSS: HDMI: Add support to dump registers through debugfs
Add support to dump the HDMI wrapper, core, PLL and PHY registers
through debugfs.
Signed-off-by: Mythri P K <mythripk@ti.com>
[tomi.valkeinen@ti.com: updated the description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| b88f58f091f7e771315bc74c28203b5248b96be0 |
|
23-May-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Remove clk optimization at dss init
DSS enables core clocks for the duration of initialization to avoid
unnecessary context saves and restores.
With PM runtime the clocks cannot be handled in this way, outside the
dss module drivers. Thus we need to remove the optimization.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| cb5930bdb57393a6ab9dc0c96fe5f03dcfb5bf43 |
|
17-May-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Fix init and unit sequence
The initialization order of the DSS modules is important when pm_runtime
support is implemented. Currently RFBI is initialized before DISPC,
which will cause problems with pm_runtime as RFBI uses DISPC.
The same goes for uninitialization order, and dss_uninit needs to be
called last, and dispc_uninit just before that.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 5a8b572d832772722c3b3b7578e7fb968560fcf3 |
|
12-May-2011 |
Archit Taneja <archit@ti.com> |
OMAP4: DSS2: DSI: Changes for DSI2 on OMAP4
Introduce DSI2 PLL clock sources needed by LCD2 channel and DSI2 Protocol
engine and DISPC Functional clock. Do the following:
- Modify dss_get_dsi_clk_source() and dss_select_dsi_clk_source() to take the
dsi module number as an argument.
- Create debugfs files for dsi2, split the corresponding debugfs functions.
- Allow DPI to use these new clock sources.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 06b2b0d597ab6e3011e8215d02b2aa5f831efbc7 |
|
30-Mar-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: make omap_dss_(un)register_device static
omap_dss_register_device and omap_dss_unregister_device can only be
called from core.c, so we can make it static.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| a0b38cc4d35e095f14ab0f486135f8a619ebfc14 |
|
11-May-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Move display.h to include/video/
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS
driver. A more logical place for it is in include/video.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| adbc2feee11aef2b3b0f4eff427d2ea5c211e798 |
|
09-Mar-2011 |
Mythri P K <mythripk@ti.com> |
OMAP4: DSS: HDMI: Call to HDMI module init to register driver.
calling the platform registration of HDMI driver from core
during initialization.
Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 0a5835185420160f4fe8a6e1d1e42cd7efa07dc7 |
|
01-Mar-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Remove unneeded cpu_is_xxx checks
cpu_is_omapxxx() was used previously to select the supported interfaces.
Now that the interfaces are platform devices, we no longer need to do
the check when registering the driver. Thus we can just remove the
checks.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 587b5e8269fab583e4e9d2d6bbdc77b289ac78a7 |
|
01-Mar-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Move DPI & SDI init into DSS plat driver
DPI and SDI are different from the other interfaces as they are not
hwmods and there is not platform driver for them. They could be said to
be a part of DSS or DISPC modules, although it's not a clear definition.
This patch moves DPI and SDI initialization into DSS platform driver,
making the code more consistent: omap_dss_probe() only initializes
platform drivers now.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 277b2881c3c0d97e214487fbd677b0590fb4acf3 |
|
01-Mar-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Remove pdev argument from dpi_init
dpi_init() does not use the pdev argument for anything. Remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 42c9dee82129d965bc8ca02170150817317c0135 |
|
01-Mar-2011 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support
FB_OMAP_BOOTLOADER_INIT does not work, and it was only partially
implemented for SDI.
This patch removes support for FB_OMAP_BOOTLOADER_INIT to clean up the
code and to remove any assumptions that FB_OMAP_BOOTLOADER_INIT would
work.
Proper implementation is much more complex, requiring early boot time
register and clock handling to keep the DSS running.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| ac425ed5fb0b6564d4eeee9fb13ef0c1f6da8e8f |
|
16-Feb-2011 |
Jani Nikula <jani@nikula.org> |
OMAP: DSS2: Fix def_disp module param description
MODULE_PARM_DESC() takes the name of the actual module parameter, not the
name of the variable, as input. Fix the module parameter description for
def_disp.
Signed-off-by: Jani Nikula <jani@nikula.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 6af9cd1431db952a7f9f8931497c9989a48b07df |
|
31-Jan-2011 |
Archit Taneja <archit@ti.com> |
OMAP2PLUS: DSS2: Generalize naming of PRCM related clock enums in DSS driver
enum dss_clock structure is replaced with generic names that
could be used across OMAP2420, 2430, 3xxx, 44xx platforms.
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| c8aac01b7bd1109795586db11ea7f12ab1e2d163 |
|
24-Jan-2011 |
Senthilvadivu Guruswamy <svadivu@ti.com> |
OMAP2, 3: DSS2: DSI: create platform_driver, move init, exit to driver
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for DSI is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.
Also, vdds_dsi regulator handling is copied to dsi.c, since vdds_dsi regulator is
needed by dpi_init() too. Board files are updated accordingly to add 2 instances of
vdds_dsi regulator.
DSI platform driver is registered from inside omap_dss_probe, in the order desired.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 30ea50c9f5166a375b4dc0109d18a5d21bab5711 |
|
24-Jan-2011 |
Senthilvadivu Guruswamy <svadivu@ti.com> |
OMAP2, 3: DSS2: VENC: create platform_driver, move init, exit to driver
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for VENC is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.
Also, venc_vdda_dac reading is moved to venc.c.
VENC platform driver is registered from inside omap_dss_probe, in the order desired.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 060b6d9cbab03f1379dbe00393ab26d6eb371ce2 |
|
24-Jan-2011 |
Senthilvadivu Guruswamy <svadivu@ti.com> |
OMAP2, 3: DSS2: DISPC: create platform_driver, move init, exit to driver
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for DISPC is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.
DISPC platform driver is registered from inside omap_dss_probe, in the order desired.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 3448d500f7002a5ee374ec92d954b1667cbf72a4 |
|
24-Jan-2011 |
Senthilvadivu Guruswamy <svadivu@ti.com> |
OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driver
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for RFBI is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.
RFBI platform driver is registered from inside omap_dss_probe, in the order desired.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 8b9cb3a8f39d0864c925c5cd5c2c54cfd85ad551 |
|
24-Jan-2011 |
Senthilvadivu Guruswamy <svadivu@ti.com> |
OMAP2, 3: DSS2: Move clocks from core driver to dss driver
All clock management is moved to dss platform driver. clk_get/put APIs use
dss device instead of core platform device.
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So the device name is changed from omapdss to omapdss_dss in 2420, 2430,
3xxx clock database files. Now the core driver "omapdss" only takes care
of panel registration with the custom bus.
core driver also uses the clk_enable() / clk_disable() APIs exposed by DSS for
clock management.
DSS driver would do clock management of clocks needed by DISPC, RFBI, DSI, VENC
TODO: The clock content would be adapted to omap_hwmod in a seperate series.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 96c401bcb83a182a4f332f2f64ee6530ba35511a |
|
24-Jan-2011 |
Senthilvadivu Guruswamy <svadivu@ti.com> |
OMAP2, 3: DSS2: DSS: create platform_driver, move init, exit to driver
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver of DSS is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.
DSS platform driver is registered from inside omap_dss_probe, in the order desired.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| 8ba775ca0d375ab42404ffd7a1a38326a7b21321 |
|
24-Jan-2011 |
Sumit Semwal <sumit.semwal@ti.com> |
OMAP2, 3: DSS2: remove forced clk-disable from omap_dss_remove
As part of omap hwmod changes, DSS will not be the only controller of its
clocks. hwmod initialization also enables the interface clocks, and
manages them.
So, when DSS is built as a module, omap_dss_remove doesn't try to disable
all clocks that have a higher usecount.
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
/drivers/video/omap2/dss/core.c
|
| a0acb5574b01f1a82dc5d863b4d89d84397aeafa |
|
15-Sep-2010 |
Archit Taneja <archit@ti.com> |
OMAP: DSS2: Use dss_features framework on DSS2 code
Calls init functions of dss_features during dss_probe, and the following
features are made omapxxxx independent:
- number of managers, overlays
- supported color modes for each overlay
- supported displays for each manager
- global aplha, and restriction of global alpha for video1 pipeline
- The register field ranges : FIRHINC, FIRVINC, FIFOHIGHTHRESHOLD
FIFOLOWTHRESHOLD and FIFOSIZE
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| fce064cbda85dda330150e8d4d9f6db1a3300023 |
|
07-May-2010 |
Jani Nikula <ext-jani.1.nikula@nokia.com> |
OMAP: DSS2: Fix omap_dss_probe() error path
Perform graceful cleanup on errors instead of just bailing out.
Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| 368a148ea3833b540945fa53a63227c8ce76aa8f |
|
07-May-2010 |
Jani Nikula <ext-jani.1.nikula@nokia.com> |
OMAP: DSS2: omap_dss_probe() conditional compilation cleanup
Move a number of #ifdefs from code into dss.h and elsewhere, and
conditionally define no-op static inline functions, cleaning up the
code. This style is according to Documentation/SubmittingPatches.
Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| b4d78bf7a4663c8354ec9432eb9631b144a33ffa |
|
17-Mar-2010 |
Roger Quadros <roger.quadros@nokia.com> |
OMAP: DSS2: Add Kconfig option for DPI display type
This allows us to disable DPI on systems that do not have it
Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| a269950405ab17ce3a604ddcd939709a4a7a747c |
|
11-Jan-2010 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: move get_recommended_bpp()
Move get_recommended_bpp() from omap_dss_device to omap_dss_driver.
This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| 96adceceedefff9b849d25ff582bc6f516903994 |
|
11-Jan-2010 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: move get_resolution()
Move get_resolution() from omap_dss_device to omap_dss_driver.
This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| c121b15244c53637c3e9ca608b8816abcfbe2f8e |
|
17-Feb-2010 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: fix driver probe error handling
If driver's probe failed, the uninit was not called.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| e020f9af6d8311cd935217219f49175e161be100 |
|
17-Feb-2010 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: remove sub-panel system
The system to allow panel drivers to exists as attached to ctrl drivers
did never work very well. It is not useed, and this patch removes it to
make the driver cleaner.
For now, controller drivers need to include also the panel driver code. In
the future a proper mechanism for this should be developed, perhaps by
creating busses for controllers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| e296264977f68ddf395b8f93f8e174930f88499a |
|
01-Dec-2009 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: Check ctx loss count only when starting the first clock
When OMAP PM layer is no-op/debug, the PM layer will increment context
loss count with every call. This resulted DSS2 to restore context
whenever a clock was enabled.
This commit checks the context loss count only when the context actually
could have been lost, ie. when enabling a clock when no clocks had been
previously enabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| 853525d7785761d2d9c121b41326ab19d3af4a22 |
|
07-Feb-2010 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: fix irq-stats compilation
Fix compilation of the CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS feature.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| 8a2cfea8ccb6292dc43c37968fe08475ae7c2576 |
|
04-Feb-2010 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: enable VDDS_DSI when using DPI
It looks like on OMAP3 some DSS pins need VDDS_DSI to function properly.
This has not been confirmed from TI, but looking at figure 15-1 "Display
subsystem highlight" from the TRM, some data pins come near the DSI and SDI
blocks. This is not very hard evidence, but the fact remains that with the
power on, pixels are ok, and with the power off, pixels are not ok.
It may also be that VDDS_SDI is needed to power some pins, but as normally
both VDDS_SDI and VDDS_DSI come from the same power source, this hasn't
been shown.
It seems that a single driver can only get a regulator once. This patch
solves it by getting all the required regulators in one place, and from
which the submodules then get the regulators they need.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| 5c18df85d731196f40784492d36d0baefdedf15a |
|
04-Jan-2010 |
Vaibhav Hiremath <hvaibhav@ti.com> |
OMAP: DSS2: Fix compile warning
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| dfc0fd8d8850ef11951ba6c251e06096d1b5a0bd |
|
17-Dec-2009 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: Collect interrupt statistics
Collect interrupt statistics, printable via debugfs:
debugfs/omapdss/dispc_irq
debugfs/omapdss/dsi_irq
The counters are reset when printed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|
| 559d67018950ced65c73358cd69c4bdd2b0c5dd6 |
|
03-Nov-2009 |
Tomi Valkeinen <tomi.valkeinen@nokia.com> |
OMAP: DSS2: Display Subsystem Driver core
The core files of DSS2. DSS2 commits are split a bit artificially to
make the individual commits smaller, and DSS2 doesn't compile properly
without the rest of the core commits. This shouldn't be a problem, as no
configuration uses DSS2 yet.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
/drivers/video/omap2/dss/core.c
|