1/* 2 * Definitions for ioctls to access DHD iovars. 3 * Based on wlioctl.h (for Broadcom 802.11abg driver). 4 * (Moves towards generic ioctls for BCM drivers/iovars.) 5 * 6 * Definitions subject to change without notice. 7 * 8 * Copyright (C) 1999-2012, Broadcom Corporation 9 * 10 * Unless you and Broadcom execute a separate written software license 11 * agreement governing use of this software, this software is licensed to you 12 * under the terms of the GNU General Public License version 2 (the "GPL"), 13 * available at http://www.broadcom.com/licenses/GPLv2.php, with the 14 * following added to such license: 15 * 16 * As a special exception, the copyright holders of this software give you 17 * permission to link this software with independent modules, and to copy and 18 * distribute the resulting executable under terms of your choice, provided that 19 * you also meet, for each linked independent module, the terms and conditions of 20 * the license of that module. An independent module is a module which is not 21 * derived from this software. The special exception does not apply to any 22 * modifications of the software. 23 * 24 * Notwithstanding the above, under no circumstances may you combine this 25 * software in any way with any other Broadcom software provided under a license 26 * other than the GPL, without Broadcom's express prior written consent. 27 * 28 * $Id: dhdioctl.h 303826 2011-12-20 06:02:09Z $ 29 */ 30 31#ifndef _dhdioctl_h_ 32#define _dhdioctl_h_ 33 34#include <typedefs.h> 35 36 37/* require default structure packing */ 38#define BWL_DEFAULT_PACKING 39#include <packed_section_start.h> 40 41 42/* Linux network driver ioctl encoding */ 43typedef struct dhd_ioctl { 44 uint cmd; /* common ioctl definition */ 45 void *buf; /* pointer to user buffer */ 46 uint len; /* length of user buffer */ 47 bool set; /* get or set request (optional) */ 48 uint used; /* bytes read or written (optional) */ 49 uint needed; /* bytes needed (optional) */ 50 uint driver; /* to identify target driver */ 51} dhd_ioctl_t; 52 53/* Underlying BUS definition */ 54enum { 55 BUS_TYPE_USB = 0, /* for USB dongles */ 56 BUS_TYPE_SDIO /* for SDIO dongles */ 57}; 58 59/* per-driver magic numbers */ 60#define DHD_IOCTL_MAGIC 0x00444944 61 62/* bump this number if you change the ioctl interface */ 63#define DHD_IOCTL_VERSION 1 64 65#define DHD_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ 66#define DHD_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ 67 68/* common ioctl definitions */ 69#define DHD_GET_MAGIC 0 70#define DHD_GET_VERSION 1 71#define DHD_GET_VAR 2 72#define DHD_SET_VAR 3 73 74/* message levels */ 75#define DHD_ERROR_VAL 0x0001 76#define DHD_TRACE_VAL 0x0002 77#define DHD_INFO_VAL 0x0004 78#define DHD_DATA_VAL 0x0008 79#define DHD_CTL_VAL 0x0010 80#define DHD_TIMER_VAL 0x0020 81#define DHD_HDRS_VAL 0x0040 82#define DHD_BYTES_VAL 0x0080 83#define DHD_INTR_VAL 0x0100 84#define DHD_LOG_VAL 0x0200 85#define DHD_GLOM_VAL 0x0400 86#define DHD_EVENT_VAL 0x0800 87#define DHD_BTA_VAL 0x1000 88#define DHD_ISCAN_VAL 0x2000 89#define DHD_ARPOE_VAL 0x4000 90#define DHD_REORDER_VAL 0x8000 91 92#ifdef SDTEST 93/* For pktgen iovar */ 94typedef struct dhd_pktgen { 95 uint version; /* To allow structure change tracking */ 96 uint freq; /* Max ticks between tx/rx attempts */ 97 uint count; /* Test packets to send/rcv each attempt */ 98 uint print; /* Print counts every <print> attempts */ 99 uint total; /* Total packets (or bursts) */ 100 uint minlen; /* Minimum length of packets to send */ 101 uint maxlen; /* Maximum length of packets to send */ 102 uint numsent; /* Count of test packets sent */ 103 uint numrcvd; /* Count of test packets received */ 104 uint numfail; /* Count of test send failures */ 105 uint mode; /* Test mode (type of test packets) */ 106 uint stop; /* Stop after this many tx failures */ 107} dhd_pktgen_t; 108 109/* Version in case structure changes */ 110#define DHD_PKTGEN_VERSION 2 111 112/* Type of test packets to use */ 113#define DHD_PKTGEN_ECHO 1 /* Send echo requests */ 114#define DHD_PKTGEN_SEND 2 /* Send discard packets */ 115#define DHD_PKTGEN_RXBURST 3 /* Request dongle send N packets */ 116#define DHD_PKTGEN_RECV 4 /* Continuous rx from continuous tx dongle */ 117#endif /* SDTEST */ 118 119/* Enter idle immediately (no timeout) */ 120#define DHD_IDLE_IMMEDIATE (-1) 121 122/* Values for idleclock iovar: other values are the sd_divisor to use when idle */ 123#define DHD_IDLE_ACTIVE 0 /* Do not request any SD clock change when idle */ 124#define DHD_IDLE_STOP (-1) /* Request SD clock be stopped (and use SD1 mode) */ 125 126 127/* require default structure packing */ 128#include <packed_section_end.h> 129 130#endif /* _dhdioctl_h_ */ 131